CFD in COMSOL Multiphysics
|
|
- Myron Toby Stewart
- 5 years ago
- Views:
Transcription
1 CFD in COMSOL Multiphysics Christian Wollblad Copyright 2017 COMSOL. Any of the images, text, and equations here may be copied and modified for your own internal use. All trademarks are the property of their respective owners. See
2 Worldwide Sales Offices
3 Laminar Turbulent RANS LES... Incompressible Compressible Mach number effects CFD The Classical View
4 Traditional Approach to Modeling Electromagnetic Fields Acoustics Chemical Reactions Heat Transfer Fluid Flow Structural Mechanics User Defined Equations
5 COMSOL Approach to Modeling Electromagnetic Fields Acoustics Chemical Reactions Heat Transfer Fluid Flow Structural Mechanics User Defined Equations
6 Typical Multiphysics Couplings Flow with heat transfer: Non isothermal flow/conjugate heat transfer Flow with mass transfer: Reacting flow Flow and structures: Fluid Structure Interaction (FSI) Flow with particles: Particle tracing
7 Conjugate Heat Transfer Example The model examines the air cooling of a power supply unit (PSU) with multiple electronics components acting as heat sources. Avoid damaging components by excessively high temperatures Extracting fan and a perforated grille cause an air flow in the enclosure. Fins are used to improve cooling efficiency. Cooling of a Power Supply Unit (PSU)
8 Conjugate Heat Transfer Example Fluid flow described by Navier Stokes in air in the compartment Heat transfer by conduction and advection in air Continuity in heat flux and temperature at solid air interfaces Heat transfer by conduction in the solid parts
9 Reacting Flow Example Chemical species transport and reactions in porous media Flow in porous media described by Brinkman s extension of Darcy Chemical species transport B C Porous subdomain Fluid flow described by Navier Stokes A Continuity in mass, momentum, pressure, and material across porous media interface
10 Fluid Structure Interaction Example Liquid phase described by Navier Stokes Gas phase described by Navier Stokes Solid mechanics in the obstacle with moving mesh Interface between solid and fluid described by moving mesh using the ALE method Interface between the two fluids modeled with phase fields
11 Fluid Structure Interaction ALE At fluid solid interface:,, :, Use smoothing for interior mesh points
12 Particle Tracing Example Animation using comet tail plots and Poincare maps
13 The Finite Element Method General PDE: 0 Assume that (1) Where is a set of trial functions. (1) is a Fourier expansion is a polynomial in each mesh cell is a constant value for each cell/node Spectral methods Finite elements is piecewise constant Finite volumes
14 COMSOL Multiphysics Workflow Model Definitions Micromixer Geometry Materials Physics Mesh Study
15 User Friendly Interface
16 Everything is Equation Based
17 Add Your Own Equations to COMSOL s Don t see what you need? Add your own equation ODE s PDE s Classical PDE s Just type them in No Recompiling No Programming
18 A duct T junction DEMO
19 Product Suite COMSOL 5.3
20 Creeping flow/stokes flow Laminar flow Turbulent flow Rotating machinery Utility boundary conditions Fully developed flow Screens Grilles Fans Vacuum pump Single Phase Flow A spinning soccer ball
21 Algebraic Turbulence Models Reynolds number based on local velocity magnitude and wall distance Algebraic yplus L VEL Advantages: Robust Computationally cheap Disadvantages: Less accurate Thermoelectric cooling system
22 Transport Equation Models Two Equation Models k model Low Re k model k model SST model Versatile and easy to use models Accurate enough for many industrial applications Benchmark model of a NACA0012 airfoil using the SST turbulence model.
23 Spalart Allmaras Transport Equation Models Developed for external flow in aerodynamic applications v 2 f model Extension of the k model Accounts for anisotropy caused by wall blockage Flow in a hydrocylone. A typical application where v 2 f gives superior results over twoequation models such as k ε or SST.
24 Rotating Machinery Laminar and turbulent Sliding mesh Accurate time dependent simulations Free surfaces Frozen rotor Fast, stationary approximations Can provide starting conditions for a sliding mesh simulation Stationary free surface post processing feature Flow around a torpedo
25 Separated flows Two Phase Flow Three Phase Multiphase Flow Disperse flows Bubbly Flow Mixture Model Euler Euler Model Particle Tracing Eulerian Lagrange multiphase flow Startup of a fluidized bed modeled using the Euler Euler Model interface
26 Multiphase Flow Separated Flows Tracks the exact surface location Accurate modeling of surface tension effects Includes a surface tension coefficient library Gas bubble rising from a dense liquid up into a light liquid in a three phase flow, phase field simulation Sloshing in a fuel tank
27 Multiphase Flow Disperse Flows Bubbly Flow & Mixture Model Short particle relaxation time For Bubbly flow, bubble concentration must be small (~0.1) Bubble induced turbulence in bubbly flow Mass transfer between phases Option to solve for interfacial area Euler Euler Flow General two phase flow No restriction on particle relaxation time Mixture or phase specific turbulence model Bubble induced turbulent flow in an airlift loop reactor
28 Particle Tracing Track individual particles/droplets Can represent size distributions Applications Fluid flow visualization Sprays Separation, filtration, and erosion Brownian motion and particle diffusion Rarefied gas dynamics Sprays in a CVD reactor
29 Non Isothermal Flow and Conjugate Heat Transfer Heat transfer in fluids and solids Laminar and turbulent flow Compressible flow for 0.3 Engineering correlations for convective heat transfer Porous media domains Radiation A shell and tube heat exchanger
30 High Mach Number Flow Extension of Non Isothermal Flow Laminar and turbulent flow Fully compressible flow for all Mach numbers Turbulent compressible flow in a two dimensional Sajben diffuser
31 Reacting Flow Multi component transport Migration of charged species in electric fields Mass transport in free and porous media flow Turbulent mixing and reactions Couple to Reaction Engineering Turbulent reacting flow in a multi jet reactor in a polymerization process.
32 Thin Film and Porous Media Flow Thin film flow For lubrication and flow in narrow structures, which are modeled as 3D shells Supports gaseous cavitation Mass fraction for cavitating flow in a journal bearing modeled using the Thin Film Flow, Shell interface. Porous media flow Laminar or turbulent free flow coupled to porous media flow Darcy s law and Brinkman equations with isotropic/anisotropic permeability tensor Two phase flow, Darcy s Law Subsurface flow in a volcano
33 Pipe Flow 1D simulation of fluid, heat and mass transfer in pipes. Couple to 2D and 3D models. Couple to 3D flow domains. Cooling of an Injection Mold
34 From Model to App Simulations today: Mostly used by dedicated simulation engineers and scientists just like you! Require some degree of training to get started Simulations tomorrow: R&D Engineering Manufacturing Installation Sales
35 COMSOL Users Turn App Designers Building Apps Running Apps
36 Running Apps COMSOL Client Web Browser ipad iphone
37 From Model to App
Model Builder. Tree node settings. Graphics
COMSOL V4 The Desktop Model Builder Tree node settings Graphics Messages The Four Main Branch Types Definitions Model Study Results Tree n des define Tree nodes define sequences of operations Sequence
More informationPorous Reactor with Injection Needle
Porous Reactor with Injection Needle Introduction This model treats the flow field and species distribution in an experimental reactor for studies of heterogeneous catalysis. The model exemplifies the
More informationFLOWVISION CFD FREQUENTLY ASKED QUESTIONS
FLOWVISION CFD FREQUENTLY ASKED QUESTIONS 1. Installation and Licensing 1.1. Does FlowVision have floating licenses? 1.1.1. Actually all FlowVision licenses have floating capability and no extra fees are
More informationSpeed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Content ANSYS CFD Introduction ANSYS, the company Simulation
More informationComputational Modeling and Simulation of the Human Duodenum
Computational Modeling and Simulation of the Human Duodenum Bostjan Hari 1, Serafim Bakalis 1, Peter Fryer 1 1 The University of Birmingham, School of Chemical Engineering, Edgbaston, Birmingham, United
More informationPreliminary Spray Cooling Simulations Using a Full-Cone Water Spray
39th Dayton-Cincinnati Aerospace Sciences Symposium Preliminary Spray Cooling Simulations Using a Full-Cone Water Spray Murat Dinc Prof. Donald D. Gray (advisor), Prof. John M. Kuhlman, Nicholas L. Hillen,
More informationModeling and Simulation of Single Phase Fluid Flow and Heat Transfer in Packed Beds
Modeling and Simulation of Single Phase Fluid Flow and Heat Transfer in Packed Beds by:- Balaaji Mahadevan Shaurya Sachdev Subhanshu Pareek Amol Deshpande Birla Institute of Technology and Science, Pilani
More informationMultiphase Flow Developments in ANSYS CFX-12
Multiphase Flow Developments in ANSYS CFX-12 Thomas Svensson Medeso 2008 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Outline Euler-Euler Wall Boiling Model Non-Drag Forces Euler-Lagrange
More informationreal world design & problems fluid flow engineering solving Computational Fluid Dynamics System
C F D 2 0 0 0 Computational Fluid Dynamics System solving real world engineering design & problems aerospace architecture automotive biomedical chemical processing electrical cooling environmental marine
More informationA 3D VOF model in cylindrical coordinates
A 3D VOF model in cylindrical coordinates Marmar Mehrabadi and Markus Bussmann Department of Mechanical and Industrial Engineering, University of Toronto Recently, volume of fluid (VOF) methods have improved
More informationFluid Mechanics Simulation Essentials R2014X
Fluid Mechanics Simulation Essentials R2014X About this Course Course objectives Upon completion of this course you will be able to: Set up and create CFD, CHT and FSI models in the 3DEXPERIENCE Platform
More informationCIBSE Application Manual AM11 Building Performance Modelling Chapter 6: Ventilation Modelling
Contents Background Ventilation modelling tool categories Simple tools and estimation techniques Analytical methods Zonal network methods Computational Fluid Dynamics (CFD) Semi-external spaces Summary
More informationHIGH PERFORMANCE COMPUTATION (HPC) FOR THE
HIGH PERFORMANCE COMPUTATION (HPC) FOR THE DEVELOPMENT OF FLUIDIZED BED TECHNOLOGIES FOR BIOMASS GASIFICATION AND CO2 CAPTURE P. Fede, H. Neau, O. Simonin Université de Toulouse; INPT, UPS ; IMFT ; 31400
More informationComsol Multiphysics. Release Notes. VERSION 4.3b
Comsol Multiphysics Release Notes VERSION 4.3b COMSOL Multiphysics Release Notes 1998 2013 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; and 7,623,991. Patents pending. This Documentation and
More informationFemap Thermal & Flow V11
Femap Thermal & Flow V11 by Carl J. Poplawsky presented to Femap Symposium Ann Arbor, MI. date June 4th, 2015 MAYA Company Overview OEM Foundation Siemens PLM Partner 30+ years Software Developer Femap
More informationSolved with COMSOL Multiphysics 4.2
Laminar Static Mixer Introduction In static mixers, also called motionless or in-line mixers, a fluid is pumped through a pipe containing stationary blades. This mixing technique is particularly well suited
More informationVERSION 4.4. Introduction to Pipe Flow Module
VERSION 4.4 Introduction to Pipe Flow Module Introduction to the Pipe Flow Module 1998 2013 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; 7,623,991; and 8,457,932. Patents pending. This Documentation
More informationRecent & Upcoming Features in STAR-CCM+ for Aerospace Applications Deryl Snyder, Ph.D.
Recent & Upcoming Features in STAR-CCM+ for Aerospace Applications Deryl Snyder, Ph.D. Outline Introduction Aerospace Applications Summary New Capabilities for Aerospace Continuity Convergence Accelerator
More informationBest Practices: Electronics Cooling. Ruben Bons - CD-adapco
Best Practices: Electronics Cooling Ruben Bons - CD-adapco Best Practices Outline Geometry Mesh Materials Conditions Solution Results Design exploration / Optimization Best Practices Outline Geometry Solids
More informationFree Convection in a Water Glass
Solved with COMSOL Multiphysics 4.1. Free Convection in a Water Glass Introduction This model treats free convection in a glass of water. Free convection is a phenomenon that is often disregarded in chemical
More informationStreamlining Aircraft Icing Simulations. D. Snyder, M. Elmore
Streamlining Aircraft Icing Simulations D. Snyder, M. Elmore Industry Analysis Needs / Trends Fidelity Aircraft Ice Protection Systems-Level Modeling Optimization Background Ice accretion can critically
More informationAn Overview of Computational Fluid Dynamics
An Overview of Computational Fluid Dynamics Dr. Nor Azwadi bin Che Sidik Faculty of Mechanical Engineering Universiti Teknologi Malaysia INSPIRING CREATIVE AND INNOVATIVE MINDS 1 What is CFD? C computational
More informationParticle Tracing Module
Particle Tracing Module Particle Tracing Module Released with version 4.2a in October 2011 Add-on to COMSOL Multiphysics Combines with any COMSOL Multiphysics Module Particle Tracing Particle tracing
More informationVelocity and Concentration Properties of Porous Medium in a Microfluidic Device
Velocity and Concentration Properties of Porous Medium in a Microfluidic Device Rachel Freeman Department of Chemical Engineering University of Washington ChemE 499 Undergraduate Research December 14,
More information1. Mathematical Modelling
1. describe a given problem with some mathematical formalism in order to get a formal and precise description see fundamental properties due to the abstraction allow a systematic treatment and, thus, solution
More informationKEY STAR TECHNOLOGIES: DISPERSED MULTIPHASE FLOW AND LIQUID FILM MODELLING DAVID GOSMAN EXEC VP TECHNOLOGY, CD-adapco
KEY STAR TECHNOLOGIES: DISPERSED MULTIPHASE FLOW AND LIQUID FILM MODELLING DAVID GOSMAN EXEC VP TECHNOLOGY, CD-adapco INTRODUCTION KEY METHODOLOGIES AVAILABLE IN STAR-CCM+ AND STAR-CD 1. Lagrangian modelling
More informationAutodesk Simulation Multiphysics
Autodesk Simulation Multiphysics Course Length: 2 days This course will introduce you to performing computational fluid dynamics (CFD) analyses on 3-D models. All of the available load and constraint options
More informationIntroduction to C omputational F luid Dynamics. D. Murrin
Introduction to C omputational F luid Dynamics D. Murrin Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat transfer, mass transfer, chemical reactions, and related phenomena
More informationModeling a Nozzle in a Borehole
Modeling a Nozzle in a Borehole E. Holzbecher, F. Sun Georg-August Universität Göttingen *Goldschmidtstr. 3, 37077 Göttingen, GERMANY; E-mail: eholzbe@gwdg.de Abstract: A nozzle, installed in an injecting
More informationCFD MODELING FOR PNEUMATIC CONVEYING
CFD MODELING FOR PNEUMATIC CONVEYING Arvind Kumar 1, D.R. Kaushal 2, Navneet Kumar 3 1 Associate Professor YMCAUST, Faridabad 2 Associate Professor, IIT, Delhi 3 Research Scholar IIT, Delhi e-mail: arvindeem@yahoo.co.in
More informationSimulation Based Development
Simulation Based Development About COMSOL Worldwide offices +480 employees More than 100.000 users Fast growing Thure Ralfs, Managing Director, COMSOL A/S Hilde Larsson, Application engineer, CFD Leading
More informationAdvanced Applications of STAR- CCM+ in Chemical Process Industry Ravindra Aglave Director, Chemical Process Industry
Advanced Applications of STAR- CCM+ in Chemical Process Industry Ravindra Aglave Director, Chemical Process Industry Outline Notable features released in 2013 Gas Liquid Flows with STAR-CCM+ Packed Bed
More informationTurbulent Premixed Combustion with Flamelet Generated Manifolds in COMSOL Multiphysics
Turbulent Premixed Combustion with Flamelet Generated Manifolds in COMSOL Multiphysics Rob J.M Bastiaans* Eindhoven University of Technology *Corresponding author: PO box 512, 5600 MB, Eindhoven, r.j.m.bastiaans@tue.nl
More informationEssentially, all models are wrong, but some are useful G. E. P. Box
In this module, we will deal with advanced modeling capabilities. We will rely a lot in physical models, such as, turbulence, multiphase flows, porous media, combustion, radiation, heat transfer, phase
More informationSystem Level Cooling, Fatigue, and Durability. Co-Simulation. Stuart A. Walker, Ph.D.
System Level Cooling, Fatigue, and Durability Analysis via Multiphysics Co-Simulation Stuart A. Walker, Ph.D. swalker@altair.com Outline Motivation Presentation of process Presentation of tools Presentation
More informationCOMSOL Multiphysics Training. COMSOL Multiphysics
COMSOL Multiphysics Training COMSOL Multiphysics INDEX 1. Introduction/ 01 2. Natural Convection Cooling of a Vacuum Flask / 07 3. Droplet Breakup in a T-Junction / 48 4. Cooling of an Injection Mold /
More informationTurbulence Modeling. Gilles Eggenspieler, Ph.D. Senior Product Manager
Turbulence Modeling Gilles Eggenspieler, Ph.D. Senior Product Manager 1 Overview The Role of Steady State (RANS) Turbulence Modeling Overview of Reynolds-Averaged Navier Stokes (RANS) Modeling Capabilities
More informationIntroduction To FLUENT. David H. Porter Minnesota Supercomputer Institute University of Minnesota
Introduction To FLUENT David H. Porter Minnesota Supercomputer Institute University of Minnesota Topics Covered in this Tutorial What you can do with FLUENT FLUENT is feature rich Summary of features and
More informationComparison of Classic and Finned Piston Reciprocating Linear Air Compressor Using COMSOL Multiphysics
Comparison of Classic and Finned Piston Reciprocating Linear Air Compressor Using COMSOL Multiphysics M. Heidari*, P. Barrade, and A. Rufer LEI, École Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
More informationEstimating Vertical Drag on Helicopter Fuselage during Hovering
Estimating Vertical Drag on Helicopter Fuselage during Hovering A. A. Wahab * and M.Hafiz Ismail ** Aeronautical & Automotive Dept., Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310
More informationThree Dimensional Numerical Simulation of Turbulent Flow Over Spillways
Three Dimensional Numerical Simulation of Turbulent Flow Over Spillways Latif Bouhadji ASL-AQFlow Inc., Sidney, British Columbia, Canada Email: lbouhadji@aslenv.com ABSTRACT Turbulent flows over a spillway
More informationModeling Evaporating Liquid Spray
Tutorial 16. Modeling Evaporating Liquid Spray Introduction In this tutorial, FLUENT s air-blast atomizer model is used to predict the behavior of an evaporating methanol spray. Initially, the air flow
More informationDevelopment of Hybrid Fluid Jet / Float Polishing Process
COMSOL Conference - Tokyo 2013 Development of Hybrid Fluid Jet / Float Polishing Process A. Beaucamp, Y. Namba Dept. of Mechanical Engineering, Chubu University, Japan Zeeko LTD, United Kingdom Research
More informationApplications of ICFD solver by LS-DYNA in Automotive Fields to Solve Fluid-Solid-Interaction (FSI) Problems
Applications of ICFD solver by LS-DYNA in Automotive Fields to Solve Fluid-Solid-Interaction (FSI) Problems George Wang(1 ), Facundo del Pin(2), Inaki Caldichoury (2), Prince Rodriguez(3), Jason Tippie
More informationin:flux - Intelligent CFD Software
in:flux - Intelligent CFD Software info@insightnumerics.com Fire and Gas Mapping. Optimized. Slide 1 Introduction to in:flux in:flux is a CFD software product to be used for dispersion and ventilation
More informationFIDAP Fidap 8.5 Page 1 of 6
FIDAP 8.5 Page 1 of 6 FIDAP 8.5 is the CFD solver of choice for a wide variety of laminar and turbulent flows that arise in the polymer processing, thin film coating, biomedical, semiconductor crystal
More informationTutorial: Modeling Liquid Reactions in CIJR Using the Eulerian PDF transport (DQMOM-IEM) Model
Tutorial: Modeling Liquid Reactions in CIJR Using the Eulerian PDF transport (DQMOM-IEM) Model Introduction The purpose of this tutorial is to demonstrate setup and solution procedure of liquid chemical
More informationApplication of coupled solver technology to CFD modeling of multiphase flows with CFX
Application of coupled solver technology to CFD modeling of multiphase flows with CFX A. Bums, A. Splawski, S. Lo & C. Guetari AEA Technology, 2000 Oxford Drive, Suite 61 0, Bethel Park, PA 151 02, USA
More informationSolver Basics. Introductory FLUENT Training ANSYS, Inc. All rights reserved. ANSYS, Inc. Proprietary
Solver Basics Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 3-2 Solver Execution The menus are arranged such that the order of operation is generally
More informationInvestigation of mixing chamber for experimental FGD reactor
Investigation of mixing chamber for experimental FGD reactor Jan Novosád 1,a, Petra Danová 1 and Tomáš Vít 1 1 Department of Power Engineering Equipment, Faculty of Mechanical Engineering, Technical University
More informationMultiphase Interactions: Which, When, Why, How? Ravindra Aglave, Ph.D Director, Chemical Process Industry
Multiphase Interactions: Which, When, Why, How? Ravindra Aglave, Ph.D Director, Chemical Process Industry Outline Classification of Multiphase Flows Examples: Free Surface Flow using Volume of Fluid Examples:
More informationFree Surface Flow Simulations
Free Surface Flow Simulations Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd. United Kingdom 11/Jan/2005 Free Surface Flow Simulations p.1/26 Outline Objective Present two numerical modelling approaches for
More informationVerification and Validation in CFD and Heat Transfer: ANSYS Practice and the New ASME Standard
Verification and Validation in CFD and Heat Transfer: ANSYS Practice and the New ASME Standard Dimitri P. Tselepidakis & Lewis Collins ASME 2012 Verification and Validation Symposium May 3 rd, 2012 1 Outline
More informationSPC 307 Aerodynamics. Lecture 1. February 10, 2018
SPC 307 Aerodynamics Lecture 1 February 10, 2018 Sep. 18, 2016 1 Course Materials drahmednagib.com 2 COURSE OUTLINE Introduction to Aerodynamics Review on the Fundamentals of Fluid Mechanics Euler and
More informationIntroduction to Abaqus/CFD for Multiphysics Applications
Introduction to Abaqus/CFD for Multiphysics Applications R 6.12 About this Course Course objectives Upon completion of this course you will be able to: Set up and create CFD and FSI models with Abaqus
More informationExample Simulations in OpenFOAM
Example Simulations in OpenFOAM Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom FSB, University of Zagreb, Croatia 18/Nov/2005 Example Simulations in OpenFOAM p.1/26 Outline Objective Present
More informationPre-compiled applications and utilities in OpenFOAM
Pre-compiled applications and utilities in OpenFOAM Tommaso Lucchini Department of Energy Politecnico di Milano Learning outcome You will learn... the meaning of the words applications, solvers, and utilities
More informationKeywords Fluid dynamics, turbulence, computational fluid dynamics, CFD, fluidized bed, computing
Bakker A., Marshall E.M. (2004) Computational Fluid Dynamics. Encyclopedia of Chemical Processing. Editor Prof. Sunggyu Lee. Marcel Dekker Inc. New York. Computational Fluid Dynamics André Bakker and Elizabeth
More informationNUMERICAL MODELING STUDY FOR FLOW PATTERN CHANGES INDUCED BY SINGLE GROYNE
NUMERICAL MODELING STUDY FOR FLOW PATTERN CHANGES INDUCED BY SINGLE GROYNE Jungseok Ho 1, Hong Koo Yeo 2, Julie Coonrod 3, and Won-Sik Ahn 4 1 Research Assistant Professor, Dept. of Civil Engineering,
More informationModeling Evaporating Liquid Spray
Tutorial 17. Modeling Evaporating Liquid Spray Introduction In this tutorial, the air-blast atomizer model in ANSYS FLUENT is used to predict the behavior of an evaporating methanol spray. Initially, the
More informationGeneralized Porous Media Flow in ICFDLSDYNA: FSI, Free-Surface, RTM and. Parachute Modeling
Generalized Porous Media Flow in ICFDLSDYNA: FSI, Free-Surface, RTM and Parachute Modeling Rodrigo R. Paz1, Facundo Del Pin1, Iñaki Caldichoury1 and Hugo G. Castro2 1 Livermore Software Technology Corporation,
More informationHealthy Buildings 2017 Europe July 2-5, 2017, Lublin, Poland
Healthy Buildings 2017 Europe July 2-5, 2017, Lublin, Poland Paper ID 0122 ISBN: 978-83-7947-232-1 Numerical Investigation of Transport and Deposition of Liquid Aerosol Particles in Indoor Environments
More informationAutomated Installation Verification of COMSOL via LiveLink for MATLAB
Autoated Installation Verification of COMSOL via LiveLink for MATLAB Michael W. Crowell Oak Ridge National Laboratory, PO Bo 2008 MS6423, Oak Ridge, TN 37831 crowellw@ornl.gov Abstract: Verifying that
More informationParametric Study of Sloshing Effects in the Primary System of an Isolated LFR Marti Jeltsov, Walter Villanueva, Pavel Kudinov
1 Parametric Study of Sloshing Effects in the Primary System of an Isolated LFR 19.06.2013 Marti Jeltsov, Walter Villanueva, Pavel Kudinov Division of Nuclear Power Safety Royal Institute of Technology
More informationPutting the Spin in CFD
w h i t e p a p e r Putting the Spin in CFD insight S U M MARY Engineers who design equipment with rotating components need to analyze and understand the behavior of those components if they want to improve
More informationUsing the Eulerian Multiphase Model for Granular Flow
Tutorial 21. Using the Eulerian Multiphase Model for Granular Flow Introduction Mixing tanks are used to maintain solid particles or droplets of heavy fluids in suspension. Mixing may be required to enhance
More informationTutorial: Hydrodynamics of Bubble Column Reactors
Tutorial: Introduction The purpose of this tutorial is to provide guidelines and recommendations for solving a gas-liquid bubble column problem using the multiphase mixture model, including advice on solver
More informationVERSION 4.3. Introduction to Heat Transfer Module
VERSION 4.3 Introduction to Heat Transfer Module Introduction to the Heat Transfer Module 1998 2012 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; and 7,623,991. Patents pending. This Documentation
More information2008 International ANSYS Conference Strongly Coupled FSI Simulation Moving Compressible Pressure Pulse through a Tube
2008 International ANSYS Conference Strongly Coupled FSI Simulation Moving Compressible Pressure Pulse through a Tube Daniel L. Cler, US Army RDECOM/ ARDEC/ WSEC/ Benet Labs 1 Overview Background Problem
More informationCFD Simulation of Cavitation in an Internal Gear Pump
CFD Simulation of Cavitation in an Internal Gear Pump Dr. Andreas Spille-Kohoff Jan Hesse CFX Berlin Software GmbH Berlin andreas.spille@cfx-berlin.de Contents Introduction Geometry and mesh Simulation
More informationIntroduction to Computational Fluid Dynamics Mech 122 D. Fabris, K. Lynch, D. Rich
Introduction to Computational Fluid Dynamics Mech 122 D. Fabris, K. Lynch, D. Rich 1 Computational Fluid dynamics Computational fluid dynamics (CFD) is the analysis of systems involving fluid flow, heat
More informationANSYS FLUENT. Airfoil Analysis and Tutorial
ANSYS FLUENT Airfoil Analysis and Tutorial ENGR083: Fluid Mechanics II Terry Yu 5/11/2017 Abstract The NACA 0012 airfoil was one of the earliest airfoils created. Its mathematically simple shape and age
More informationCFD Modelling in the Cement Industry
CFD Modelling in the Cement Industry Victor J. Turnell, P.E., Turnell Corp., USA, describes computational fluid dynamics (CFD) simulation and its benefits in applications in the cement industry. Introduction
More informationRecent applications of overset mesh technology in SC/Tetra
Recent applications of overset mesh technology in SC/Tetra NIA CFD Seminar October 6, 2014 Tomohiro Irie Software Cradle Co., Ltd. 1 Contents Introduction Software Cradle SC/Tetra Background of Demands
More informationChapter 1 Introduction
Chapter 1 Introduction Ibrahim Sezai Department of Mechanical Engineering Eastern Mediterranean University Fall 2009-2010 What is CFD? CFD is the simulation of fluids engineering systems using modeling
More informationVirtual Temperature Cycle Test (TCT) for validation of indirect Charge Air Coolers and Exhaust Gas Recirculation Coolers
Virtual Temperature Cycle Test (TCT) for validation of indirect Charge Air Coolers and Exhaust Gas Recirculation Coolers STAR Global Conference 2014 Vienna, March 17-19 G. Apostolopoulos, R. Stauch, C.
More informationConvection Cooling of Circuit Boards 3D Natural Convection
Convection Cooling of Circuit Boards 3D Natural Convection Introduction This example models the air cooling of circuit boards populated with multiple integrated circuits (ICs), which act as heat sources.
More informationLaboratory-to-Pilot Fluidization Scaling Study with Eulerian Multiphase CFD Model
Ari Vepsäläinen LTY Heterogeneous Mass Transfer Characteristics in Char Combustion at Fluidized Beds Laboratory-to-Pilot Fluidization Scaling Study with Eulerian Multiphase CFD Model Research program on
More informationOutline. COMSOL Multyphysics: Overview of software package and capabilities
COMSOL Multyphysics: Overview of software package and capabilities Lecture 5 Special Topics: Device Modeling Outline Basic concepts and modeling paradigm Overview of capabilities Steps in setting-up a
More informationDirections: 1) Delete this text box 2) Insert desired picture here
Directions: 1) Delete this text box 2) Insert desired picture here Multi-Disciplinary Applications using Overset Grid Technology in STAR-CCM+ CD-adapco Dmitry Pinaev, Frank Schäfer, Eberhard Schreck Outline
More informationApplication of Wray-Agarwal Turbulence Model for Accurate Numerical Simulation of Flow Past a Three-Dimensional Wing-body
Washington University in St. Louis Washington University Open Scholarship Mechanical Engineering and Materials Science Independent Study Mechanical Engineering & Materials Science 4-28-2016 Application
More informationCalculate a solution using the pressure-based coupled solver.
Tutorial 19. Modeling Cavitation Introduction This tutorial examines the pressure-driven cavitating flow of water through a sharpedged orifice. This is a typical configuration in fuel injectors, and brings
More informationModeling of Laminar Flow Static Mixers
Modeling of Laminar Flow Static Mixers Nagi Elabbasi, Xiaohu Liu, Stuart Brown ( ) Mike Vidal, Matthew Pappalardo (Nordson EFD) COMSOL Conference 2012, Boston, MA Excerpt from the Proceedings of the 2012
More informationDebojyoti Ghosh. Adviser: Dr. James Baeder Alfred Gessow Rotorcraft Center Department of Aerospace Engineering
Debojyoti Ghosh Adviser: Dr. James Baeder Alfred Gessow Rotorcraft Center Department of Aerospace Engineering To study the Dynamic Stalling of rotor blade cross-sections Unsteady Aerodynamics: Time varying
More informationOptimizing Bio-Inspired Flow Channel Design on Bipolar Plates of PEM Fuel Cells
Excerpt from the Proceedings of the COMSOL Conference 2010 Boston Optimizing Bio-Inspired Flow Channel Design on Bipolar Plates of PEM Fuel Cells James A. Peitzmeier *1, Steven Kapturowski 2 and Xia Wang
More informationFlow and Heat Transfer in a Mixing Elbow
Flow and Heat Transfer in a Mixing Elbow Objectives The main objectives of the project are to learn (i) how to set up and perform flow simulations with heat transfer and mixing, (ii) post-processing and
More informationHomogenization and numerical Upscaling. Unsaturated flow and two-phase flow
Homogenization and numerical Upscaling Unsaturated flow and two-phase flow Insa Neuweiler Institute of Hydromechanics, University of Stuttgart Outline Block 1: Introduction and Repetition Homogenization
More informationImpact of STAR-CCM+ v7.0 in the Automotive Industry Frederick J. Ross, CD-adapco Director, Ground Transportation
Impact of STAR-CCM+ v7.0 in the Automotive Industry Frederick J. Ross, CD-adapco Director, Ground Transportation Vehicle Simulation Components Vehicle Aerodynamics Design Studies Aeroacoustics Water/Dirt
More informationFuture Trends for Computational Fluid Dynamics in the Process Industry
Third International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 10-12 December 2003 Future Trends for Computational Fluid Dynamics in the Process Industry Ahmad
More informationA Comparative CFD Analysis of a Journal Bearing with a Microgroove on the Shaft & Journal
Proceedings of International Conference on Innovation & Research in Technology for Sustainable Development (ICIRT 2012), 01-03 November 2012 182 A Comparative CFD Analysis of a Journal Bearing with a Microgroove
More informationComsol Multiphysics. Release Notes VERSION 4.3
Comsol Multiphysics Release Notes VERSION 4.3 COMSOL Multiphysics Release Notes 1998 2012 COMSOL Protected by U.S. Patents 7,519,518; 7,596,474; and 7,623,991. Patents pending. This Documentation and the
More informationCloud-based simulation of plasma sources for surface treatment
Cloud-based simulation of plasma sources for surface treatment Using the PlasmaSolve Simulation Suite (P3S) Adam Obrusnik, Petr Zikan June 7, 2018 Outline 1. About PlasmaSolve 2. PlasmaSolve Simulation
More informationFLOWING FLUIDS AND PRESSURE VARIATION
Chapter 4 Pressure differences are (often) the forces that move fluids FLOWING FLUIDS AND PRESSURE VARIATION Fluid Mechanics, Spring Term 2011 e.g., pressure is low at the center of a hurricane. For your
More informationEVALUATION OF A GENERAL CFD-SOLVER FOR A MICRO-SCALE URBAN FLOW
EVALATION OF A GENERAL CFD-SOLVER FOR A MICRO-SCALE RBAN FLOW Jarkko Saloranta and Antti Hellsten Helsinki niversity of Technology, Laboratory of Aerodynamics, Finland INTRODCTION In this work we study
More informationUsing the Discrete Ordinates Radiation Model
Tutorial 6. Using the Discrete Ordinates Radiation Model Introduction This tutorial illustrates the set up and solution of flow and thermal modelling of a headlamp. The discrete ordinates (DO) radiation
More informationExpress Introductory Training in ANSYS Fluent Workshop 02 Using the Discrete Phase Model (DPM)
Express Introductory Training in ANSYS Fluent Workshop 02 Using the Discrete Phase Model (DPM) Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
More informationALE and Fluid-Structure Interaction in LS-DYNA March 2004
ALE and Fluid-Structure Interaction in LS-DYNA March 2004 Workshop Models 1. Taylor bar impact 2. One-dimensional advection test 3. Channel 4. Underwater explosion 5. Bar impacting water surface 6. Sloshing
More informationParallelization study of a VOF/Navier-Stokes model for 3D unstructured staggered meshes
Parallelization study of a VOF/Navier-Stokes model for 3D unstructured staggered meshes L. Jofre, O. Lehmkuhl, R. Borrell, J. Castro and A. Oliva Corresponding author: cttc@cttc.upc.edu Centre Tecnològic
More informationInvestigation and Feasibility Study of Linux and Windows in the Computational Processing Power of ANSYS Software
Science Arena Publications Specialty Journal of Electronic and Computer Sciences Available online at www.sciarena.com 2017, Vol, 3 (1): 40-46 Investigation and Feasibility Study of Linux and Windows in
More informationNumerical Study of Turbulent Flow over Backward-Facing Step with Different Turbulence Models
Numerical Study of Turbulent Flow over Backward-Facing Step with Different Turbulence Models D. G. Jehad *,a, G. A. Hashim b, A. K. Zarzoor c and C. S. Nor Azwadi d Department of Thermo-Fluids, Faculty
More information