Trimble CU Updater OS Update Instructions

Transcription

1 Trimble CU Updater OS Update Instructions Welcome Copyrights and Trademarks System Requirements Trimble CU Model 3 Set up Trimble S3 Servo/Autolock Total Station Set up Update OS Version 2.0 March 2011

2 Welcome 1.1 Welcome to the Trimble CU Model 3 and Trimble S3 Servo/Autolock Total Station OS update instructions. These instructions will guide you through the steps needed to update the Operating System (OS) with the help of the Trimble CU Updater software. In these instructions the Trimble CU Model 3 will be refered to as the Controller, the Operating System will be refered to as the OS and The Trimble S3 Servo/Autolock Total Station will be refered to as the instrument. Copyrights and Trademarks , Trimble Navigation Limited. All rights reserved. Trimble and the Globe & Triangle logo are trademarks of Trimble Navigation Limited, registered in the United States Patent and Trademark Office and other countries. Microsoft, ActiveSync, Windows Vista, Windows Mobile and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are the property of their respective owners. System Requirements 1.3 The following requirements are needed to perform the OS update. PC Requirements 13.1 Here are the requirements for the PC. Windows XP, Windows Vista, Windows 7 32-bit Microsoft.Net 3.5 Visual C runtime Active Sync 4.2 (Windows XP) or Windows Mobile Device Center (Windows Vista & Windows 7) PDF-reader Equipment 13.2 Here are the equipment needed. Trimble CU Model 3 or Trimble S3 Servo/Autolock Total Station Docking station for the Trimble CU Model 3 Power Supply and USB to Hirose cable Trimble CU Updater OS Update Instructions 2

3 Trimble CU Model 3 Set up 1.4 The following describes how to set up your controller for OS update. Connect to Docking Station 14.1 Connect the controller to a Docking Station. Figure 1.1 Connecting the controller to the Docking Station Connect Communication and Power Supply 14.2 Connect the Docking Station s +12V connector to +12V power supply and the Com connector to a USB connector on your PC. Figure 1.2 Connecting +12V and communication Trimble CU Updater OS Update Instructions 3

4 Trimble S3 Servo/Autolock Total Station Set up 1.5 The following describes how to set up your instrument for OS update. Connect communication from the USB connector on the side of the control panel to the USB connector on your computer. Figure 1.3 Connecting communication between instrument and PC. Connect +12V power supply to the +12V foot connector. Figure 1.4 Connecting +12V to the instrument. Trimble CU Updater OS Update Instructions 4

5 Update OS 1.6 Follow the steps below to update your OS version. 1. Connect and start your controller or instrument. 2. Create a back up of your job files. 3. Double click on thetrimble Icon to start the Trimble CU Updater, files will be extracted and the Trimble CU Updater will be started. Figure 1.5 Files being extracted. Trimble CU Updater OS Update Instructions 5

6 Figure 1.6 Trimble CU Updater started. 4. Click Next to continue the update. 5. Read the EULA, End User License Agreement, and if you agree click the check box I accept the terms in the license agreement. Trimble CU Updater OS Update Instructions 6

7 Figure 1.7 Trimble CU Updater displaying the EULA End User License Agreement. 6. Click next, the Trimble CU Updater will now establish communication with the controller or instrument. Note If connection is not established automatically, see Manual Connection on page 13. The controller or instrument and Trimble CU Updater will display that communication has been established, see Figure 1.8 and see Figure 1.9. Trimble CU Updater OS Update Instructions 7

8 Figure 1.8 Controller or instrument displaying that communication has been established with Trimble CU Updater. Trimble CU Updater OS Update Instructions 8

9 Figure 1.9 Trimble CU Updater displaying that communication has been established with controller. 7. Click next. The Trimble CU Updater will display which files that are to be down loaded to the controller or instrument. The files are selected by default. The Options check box will be selected by default. The option will back up and restore Trimble application settings e.g. license code for field software. Trimble CU Updater OS Update Instructions 9

10 Figure 1.10 Trimble CU Updater displaying possible selections and options. 8. Click Update to start the update. Trimble CU Updater OS Update Instructions 10

11 Figure 1.11 Trimble CU Updater displaying update progress. The Trimble CU Updater will display the update progress. When the update is finished the Trimble CU Updater will display Update finished successfully!, see Figure Trimble CU Updater OS Update Instructions 11

12 Figure 1.12 Trimble CU Updater displaying that the update is finished. 9. Click finish to end the Trimble CU Updater software. The controller or instrument will now be restarted. Note The field software must now be reinstalled. Trimble CU Updater OS Update Instructions 12

13 Manual Connection 10.1 If the controller or instrument do not connect automatically follow the instructions below. 1. Restart controller or instrument by selecting Restart CU in the Trimble CU Updater. Figure 1.13 Restart controller or instrument from Trimble CU Updater. 2. During restart hold down the ESC key on the controller or instrument keyboard until the following is displayed in the controller or instrument display. Trimble CU Updater OS Update Instructions 13

14 Figure 1.14 System menu in the controller or instrument display. 3. Step down with the spider key, arrow down to Image Down load Mode and press Enter on the controller or instrument keyboard. The following is displayed in the controller or instrument display. Figure 1.15 Controller or instrument ready for communication with Trimble CU Updater The controller or instrument are now ready for communication with Trimble CU Updater. Trimble CU Updater OS Update Instructions 14

15 Figure 1.16 Trimble CU Updater displaying no connection to controller or instrument. 4. Click Manual connect in the Trimble CU Updater. When connection is established the controller or instrument will display, see Figure The Trimble CU Updater will display, see Figure Trimble CU Updater OS Update Instructions 15

16 Figure 1.17 Controller or instrument connected to Trimble CU Updater and ready for update. Trimble CU Updater OS Update Instructions 16

17 Figure 1.18 Trimble CU Updater connected to controller or instrument and ready to run update. 5. Click next. The Trimble CU Updater will display which files that are to be down loaded to the controller or instrument. The files are selected by default. The Options check box will be selected by default. The option will back up and restore Trimble application settings e.g. license code for field software. Trimble CU Updater OS Update Instructions 17

18 Figure 1.19 Trimble CU Updater displaying possible selections and options. 6. Click Update to start the update. Trimble CU Updater OS Update Instructions 18

19 Figure 1.20 Trimble CU Updater displaying update progress. The Trimble CU Updater will display the update progress.when the update is finished the Trimble CU Updater will display Update finished successfully!, see Figure Trimble CU Updater OS Update Instructions 19

20 Figure 1.21 Trimble CU Updater displaying that the update is finished. 7. Click finish to end the Trimble CU Updater software. The controller or instrument will now be restarted. Note The field software must now be reinstalled. Trimble CU Updater OS Update Instructions 20