PIDO Technology Transfered
|
|
- Alicia Lucas
- 5 years ago
- Views:
Transcription
1
2 Research & Development Commercialization & Maintenance PIDO Technology Transfered Development of PIDO Tool Engineering Consulting Business Area Customization of Design Software Technical Support & Training
3 Initial design hour (Manual Process) = 6months 3men 160hrs/month = 2,880hrs PIAnO design hour (Automatic Process) = 2months 3men 64hrs/month = 384hrs Reduced design time over 80%
4 rocess ntegration, utomation a d ptimization CFD Analysis Crash Analysis Dynamics Analysis Control Algorithm Cost Calculation Simulation Database Automated analysis process by integrating various CAE tools in a distributed computing environment Structural Analysis PIAnO Player PIAnO Reviewer Moldflow, MAPS-3D SimulationX, AMESim, CarSim, CATIA, NX, SolidWorks, HyperMesh,
5 Car Body Design Problem Result Drum Washer Suspension System Design Problem Result Torsion Beam Axle Design Problem Result Air-Conditioner Piping System Design Problem Result y x z
6 Excel Matlab Script In-house code... Pre-Processor (Journal / Script / Macro / Command Batch execution) HyperMesh Abaqus/CAE Patran LS-Pre Gambit/Tqrid Star-CCM+ Adams/View Daful Solver (CAE Batch execution) Ansys Abaqus Nastran LS-Dyna... Fluent Star-CD... Adams Daful... Excel Matlab Script In-house code HyperView Abaqus/CAE Patran LS-Post Fluent Star-CCM+ Adams/Post Daful.Post Post-Processor (Journal / Script / Macro / Command Batch execution) Excel Matlab Script In-house code Data Transform (Optional) VBScript Analyzer JScript Analyzer Matlab Analyzer (M-files) Approximate Model Analyzer (RSM, Kriging,..) Reusable Custom Analyzer BeanShell Analyzer Excel Analyzer Commercial CAEs in PC (MSC.Nastran/ MSC.ADAMS/MSC.Fatigue/LS-Dyna/Abaqus/ Ansys/Fluent/DAFUL/Moldflow, etc.) Commercial CAEs in HPC Commercial CAEs in Distributed Computing Coupled Analyzer (Sub-Projects inside) Others Data Tracking tool for simulation data management
7 Sub ReportValue(value) If value = 0 Then MsgBox value ElseIf value = 1 Then MsgBox value ElseIf value = 2 then Msgbox value Else Msgbox Value out of range! End If What-If Study Design Sensitivity Analysis Parametric Study 1-D Parametric Study Vector Parametric Study Reliability Analysis FORM Monte Carlo Sampling (MCS) Latin Hypercube Sampling (LHS) enhanced Dimension Reduction (edr) Design Optimization Progressive Quadratic Response Surface Method (PQRSM) Micro Genetic Algorithm (Micro-GA) Evolutionary Algorithm (EA) Hybrid Optimization Algorithm (v4.x ) Metamodel-Based Sequential Approx. Opt. (v4.x ) Apporoximations Response Surface Model (RSM) Radial Basis Function for Regression Kriging Model Radial Basis Function for Interpolation Design of Experiments Full Factorial Design (FFD) Orthogonal Array (OA, 122 ) Central Composite Design (CCD/ICCD/FCCD) Plackett-Burman Design (PBD) Box-BehnKen Design (BBD) LHD/OLHD Augmented LHD (ALHD) Inherited LHD (ILHD) Reliability-Based Design Optimization Advanced Single Loop Single Vector (ASLSV) Enhanced Reliability-Based design Optimization with Smart Initiation Approach (ERBOSIA, v4.x ) edr-based Robust Design Optimization (v4.x ) Design Concept Build Analysis Task Build Design Task Run & Monitoring Postprocessing & Visualization Others JScript VBScript BeanShell Script Excel Matlab Daful RecurDyn ADAMS SAMCEF COMSOL ANSYS ABAQUS Nastran LS-Dyna PAM-Crash MSC.Fatique FEMFAT DesignLife Star-CCM Fluent CFD-Ace FloTHERM Moldflow MAPS-3D In-house Code
8 Approximation Wizard for Beginner Regression Models (RSM, RBFr) Interpolation Models (Kriging, RBFi) Automatic approximate model selection Automatic outlier removal DOE Wizard for Beginner DOE Table for Expert Conventional DOE (FFD, PBD, BBD, 122OA, CCD/ICCD/FCCD) Space-Filling DOE (LHD/OLHD) Additional DOE (ALHD, ILHD) Parametric Study Design Sensitivity Analysis DOE Wizard for Beginner Vast DOE methods Function-based SAO (PQRSM) Gradient-based SAO (STDQAO) Function-based Design Optimization (Micro GA) Global Design Optimization (EA) RBDO (Advanced SLSV) Sampling Method (MCS, LHS) Taylor Expansion Method (FORM) Approximate Integration Method (edr)
9 Smart Screening Plot Reliability Analysis Plot Screening dashboard Effect matrix Row: Design variables Column: Responses User-defined cut-off value slide Effect plot for selected response Scatter Plot Parallel Plot ANOM Plot Contour & 3D Plot
10
11 18 56
12
Multidisciplinary Analysis and Optimization
OptiY Multidisciplinary Analysis and Optimization Process Integration OptiY is an open and multidisciplinary design environment, which provides direct and generic interfaces to many CAD/CAE-systems and
More informationWebinar. Machine Tool Optimization with ANSYS optislang
Webinar Machine Tool Optimization with ANSYS optislang 1 Outline Introduction Process Integration Design of Experiments & Sensitivity Analysis Multi-objective Optimization Single-objective Optimization
More informationDYNARDO Dynardo GmbH Technology update. optislang v4.1. Robust Design Optimization. Johannes Will Dynardo GmbH
Technology update optislang v4.1 Robust Design Optimization Johannes Will Dynardo GmbH 1 optislang v4 Comprehensive systems easy and safe to use - Easy modeling of the process chain easy and safe to use
More informationIsight - parametric optimization and automation. Marko Vrh SIMULIA seminar
Isight - parametric optimization and automation Marko Vrh SIMULIA seminar Ljubljana, 12.4.2016 Agenda What is Isight Licesing What can Isight do for (or instead) of you? How to work with Isight Design
More information"optislang inside ANSYS Workbench" efficient, easy, and safe to use Robust Design Optimization (RDO) - Part I: Sensitivity and Optimization
"optislang inside ANSYS Workbench" efficient, easy, and safe to use Robust Design Optimization (RDO) - Part I: Sensitivity and Optimization Johannes Will, CEO Dynardo GmbH 1 Optimization using optislang
More informationOpen source software tools for powertrain optimisation
Open source software tools for powertrain optimisation Paolo Geremia Eugene de Villiers TWO-DAY MEETING ON INTERNAL COMBUSTION ENGINE SIMULATIONS USING OPENFOAM TECHNOLOGY 11-12 July, 2011 info@engys.eu
More informationNew developments in LS-OPT
7. LS-DYNA Anwenderforum, Bamberg 2008 Optimierung II New developments in LS-OPT Nielen Stander, Tushar Goel, Willem Roux Livermore Software Technology Corporation, Livermore, CA94551, USA Summary: This
More informationWebinar optislang & ANSYS Workbench. Dynardo GmbH
Webinar optislang & ANSYS Workbench Dynardo GmbH 1 1. Introduction 2. Process Integration and variation studies 6. Signal Processing 5. ANSYS Mechanical APDL in optislang 3. optislang inside ANSYS 4. ANSYS
More informationWebinar Parameter Identification with optislang. Dynardo GmbH
Webinar Parameter Identification with optislang Dynardo GmbH 1 Outline Theoretical background Process Integration Sensitivity analysis Least squares minimization Example: Identification of material parameters
More informationVisualDOC Software Current Features and Capabilities Phani Adduri Vanderplaats R&D 2014 VR&D Users Conference October 26-28, 2014
VisualDOC Software Current Features and Capabilities Phani Adduri Vanderplaats R&D 2014 VR&D Users Conference October 26-28, 2014 Presentation Outline What is VisualDOC VisualDOC Evolution / History Features
More informationIntroduction to Isight
Day 1 Lecture 1 Introduction Lecture 2 Isight Workshop 1 I-Beam Integration Lecture 3 Design of Experiments Workshop 2 I-Beam DOE Lecture 4 Optimization Methods Workshop 3 I-Beam Optimization Lecture 5
More informationIntroduction to Workbench Scripting & Customization ANSYS, Inc. November 29, 2012
Introduction to Workbench Scripting & Customization 1 Outline Understanding the Workbench framework WB Journaling and Scripting Different Customization Methods Conclusion 2 Workbench Framework Application
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationDesign of a control system model in SimulationX using calibration and optimization. Dynardo GmbH
Design of a control system model in SimulationX using calibration and optimization Dynardo GmbH 1 Notes Please let your microphone muted Use the chat window to ask questions During short breaks we will
More informationmodefrontier v4.3 and Beyond
modefrontier v4.3 and Beyond Product Roadmap Luka Onesti Outline Release Roadmap modefrontier v4.3 modefrontier v5 Visualization Overview Integration Concepts Release Roadmap Q1 Q2 Q3 Q4 Q1 modefrontier
More informationMetal Forming Automation using LS-OPT
14 th International LS-DYNA Users Conference Session: Metal Forming Metal Forming Automation using LS-OPT Krishna Chaitanya Kusupudi Whirlpool Corporation, GTEC, Pune, India krishna_c_kusupudi@whirlpool.com
More informationAppendix P. Multi-Physics Simulation Technology in NX. Christian Ruel (Maya Htt, Canada)
251 Appendix P Multi-Physics Simulation Technology in NX Christian Ruel (Maya Htt, Canada) 252 Multi-Physics Simulation Technology in NX Abstract As engineers increasingly rely on simulation models within
More informationLatest Developments. in versions v14.x. BETA CAE Systems S.A. June 2013 Dipl.-Ing. Dimitrios Katramados Customers Service Post-Processing Applications
Latest Developments BETA CAE Systems S.A. in versions v14.x June 2013 Dipl.-Ing. Dimitrios Katramados Customers Service Post-Processing Applications 1 Areas of Development User Interface GUI Results handling
More informationDr.-Ing. Johannes Will CAD-FEM GmbH/DYNARDO GmbH dynamic software & engineering GmbH
Evolutionary and Genetic Algorithms in OptiSLang Dr.-Ing. Johannes Will CAD-FEM GmbH/DYNARDO GmbH dynamic software & engineering GmbH www.dynardo.de Genetic Algorithms (GA) versus Evolutionary Algorithms
More informationVorstellung von LS-OPT Version 5
Vorstellung von LS-OPT Version 5 Katharina Witowski kaw@dynamore.de DYNAmore GmbH Industriestraße 2 70565 Stuttgart http://www.dynamore.de 1 Outline Overview of methodologies and applications of LS-OPT
More informationBiostatistics and Design of Experiments Prof. Mukesh Doble Department of Biotechnology Indian Institute of Technology, Madras
Biostatistics and Design of Experiments Prof. Mukesh Doble Department of Biotechnology Indian Institute of Technology, Madras Lecture - 37 Other Designs/Second Order Designs Welcome to the course on Biostatistics
More informationIntroduction to Isight. Isight 2018
Introduction to Isight Isight 2018 About this Course Course objectives Upon completion of this course you will be able to: Automate a series of functions to create a Sim-flow Add components to a Sim-flow
More informationVorstellung von LS-OPT Version 5 und Schnittstelle zu ANSA/µETA
Vorstellung von LS-OPT Version 5 und Schnittstelle zu ANSA/µETA Katharina Witowski kaw@dynamore.de DYNAmore GmbH Industriestraße 2 70565 Stuttgart http://www.dynamore.de 1 Outline Overview of methodologies
More informationMetamodeling. Modern optimization methods 1
Metamodeling Most modern area of optimization research For computationally demanding objective functions as well as constraint functions Main idea is that real functions are not convex but are in some
More informationfor multidisciplinary CAE pre- & post-processing ANSA μετα p i o n e e r i n g software systems
TM ANSA μετα p i o n e e r i n g software systems for multidisciplinary CAE pre- & post-processing www.beta-cae.gr ANSA is an advanced multidisciplinary CAE pre-processing tool that provides all the necessary
More informationoptislang recent developments
optislang recent developments WOST 11 06. 07.11.2013 Dynardo GmbH 2014 optislang 4.2 version 4.1.0 Nov. 13 (WOST) version 4.1.1 Dec. 13 (WB15) version 4.1.2 Apr. 14 version 4.1.3 Jul. 14 More than 1500
More informationSimcenter 3D Engineering Desktop
Simcenter 3D Engineering Desktop Integrating geometry and FE modeling to streamline the product development process Benefits Speed simulation processes by up to 70 percent Increase product quality by rapidly
More informationThe Role of Uncertainty Quantification in Model Verification and Validation. Part 4 NESSUS Overview
The Role of Uncertainty Quantification in Model Verification and Validation Part 4 NESSUS Overview 1 NESSUS Overview Short Course on Probabilistic Analysis and Uncertainty Quantification Southwest Research
More informationMultidisciplinary design optimization (MDO) of a typical low aspect ratio wing using Isight
Multidisciplinary design optimization (MDO) of a typical low aspect ratio wing using Isight Mahadesh Kumar A 1 and Ravishankar Mariayyah 2 1 Aeronautical Development Agency and 2 Dassault Systemes India
More informationANSYS EnSight. Advanced PostProcessing capabilities. Janos Szegletes
ANSYS EnSight Advanced PostProcessing capabilities Janos Szegletes 2018.05.03. www.econengineering.com1 Fluid Packages - Overview ANSYS CFD Premium ANSYS Ensight SpaceClaim 4 HPC DesignXplorer CFX Fluent
More informationUsing Microsoft Azure Cloud for CAE Simulations
Using Microsoft Azure Cloud for CAE Simulations Easy Step-by-Step Guide and Live CAE Demonstration Reha Senturk, The UberCloud June 5, 2018 Summary of UberCloud Summary of Microsoft Azure Benefits and
More informationCHAPTER 2 DESIGN DEFINITION
CHAPTER 2 DESIGN DEFINITION Wizard Option The Wizard is a powerful tool available in DOE Wisdom to help with the set-up and analysis of your Screening or Modeling experiment. The Wizard walks you through
More informationmodefrontier: Successful technologies for PIDO
10 modefrontier: Successful technologies for PIDO The acronym PIDO stands for Process Integration and Design Optimization. In few words, a PIDO can be described as a tool that allows the effective management
More informationMULTI-OBJECTIVE OPTIMISATION IN MODEFRONTIER FOR AERONAUTIC APPLICATIONS
EVOLUTIONARY METHODS FOR DESIGN, OPTIMIZATION AND CONTROL P. Neittaanmäki, J. Périaux and T. Tuovinen (Eds.) CIMNE, Barcelona, Spain 2007 MULTI-OBJECTIVE OPTIMISATION IN MODEFRONTIER FOR AERONAUTIC APPLICATIONS
More informationOptimization study of a parametric vehicle bumper subsystem under multiple load cases using LMS Virtual.Lab and OPTIMUS
Optimization study of a parametric vehicle bumper subsystem under multiple load cases using LMS Virtual.Lab and OPTIMUS Summary Laszlo Farkas, Cédric Canadas, Stijn Donders, Tom Van Langenhove, Nick Tzannetakis
More informationAgenda. 9:00 Welcome. 1:00 - Computing Utilities. 9:15 - Mechanical Demonstration. 1:30 - CFD Update. 3:00 Break 3:15 ANSYS Customization Toolkit
Agenda 9:00 Welcome 1:00 - Computing Utilities Introductions HPC What is new at CAEA GPU 9:15 - Mechanical Demonstration CAD connection utilities (within the CAD API) Mechanical setup Rigid Bodies, Joints,
More informationMultidisciplinary Optimization applied to the Oil&Gas Industry. Rodrigo Ferraz Nicolas Spogis ESSS
Multidisciplinary Optimization applied to the Oil&Gas Industry Rodrigo Ferraz Nicolas Spogis ESSS Agenda modefrontier Example: Impeller Optimization using CFD and modefrontier Why using optimization software?
More informationEnSight Analyzing Visualizing Communicating
EnSight EnSight Analyze, visualize and communicate your simulation data with EnSight. Engineers use this powerful general purpose post-processing tool to gain new design insights and then clearly, effectively
More informationApplication Codes. Introduction to HP XC4000 Cluster Paul Weber Rechenzentrum, Universität Karlsruhe (TH) karlsruhe.
Application Codes Introduction to HP XC4000 Cluster Paul Weber Rechenzentrum, Universität Karlsruhe (TH) paul.weber@rz.uni karlsruhe.de Application Codes from ISVs Primary CAE applications (in Karlsruhe)
More informationAdvanced Body in White Architecture Optimization
Visit the SIMULIA Resource Center for more customer examples. Advanced Body in White Architecture Optimization Jiang Xin, Chen Yong, Shi Guohong, Jiang Feng (Pan Asia Technical Automotive Center Co.,Ltd.
More informationMulti-Objective Optimization of a Boomerang Shape using modefrontier and STAR-CCM+
Multi-Objective Optimization of a Boomerang Shape using modefrontier and STAR-CCM+ Alberto Clarich*, Rosario Russo ESTECO, Trieste, (Italy) Enrico Nobile, Carlo Poloni University of Trieste (Italy) Summary
More informationWhat s new in Femap 9.3
What s new in Femap 9.3 fact sheet www.ugs.com/femap Summary Femap version 9.3 is the latest release of UGS robust pre and post processor for engineering finite element analysis (FEA). Femap software is
More informationSmartDO. Smart Computing. Smart Design Optimization. Tel :
SmartDO Design Optimization/ System Integration/ Process Automation Email : contact@smartdo.co Tel : 886-37-462-733 SmartDO Optimize Your Product. Make The Most Profit Out Of Your CAE Investment SmartDO
More information--Niju Nair, Account manager
The content in this document is for viewing only. Reproduction in any form is not permissible. --Niju Nair, Account manager Contents - Possible solutions for the engineering & Optimization challenges.
More informationNX Advanced Simulation
Siemens PLM Software Integrating FE modeling and simulation streamlines product development process Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis
More informationDesign optimization and design exploration using an open source framework on HPC facilities Presented by: Joel GUERRERO
Workshop HPC Methods for Engineering CINECA (Milan, Italy). June 17th-19th, 2015. Design optimization and design exploration using an open source framework on HPC facilities Presented by: Joel GUERRERO
More informationGLview Inova Software Suite
GLview Inova Software Suite The GLview Visualization Concept The GLview Software Suite consists of software components for visualization of engineering data that can satisfy the most demanding requirements
More informationMulti-Objective Optimization of a Strip-Fin Microchannel Heatsink: Integrating COMSOL Multiphysics with modefrontier
Excerpt from the Proceedings of the COMSOL Conference 2010 Boston Multi-Objective Optimization of a Strip-Fin Microchannel Heatsink: Integrating COMSOL Multiphysics with modefrontier Alberto Clarich, Rosario
More informationOptimization and Probabilistic Analysis Using LS-DYNA
LS-OPT Optimization and Probabilistic Analysis Using LS-DYNA Nielen Stander Willem Roux Tushar Goel Livermore Software Technology Corporation Overview Introduction: LS-OPT features overview Design improvement
More informationFundamentals of Modeling with Simcenter 3D Robin Boeykens
Fundamentals of Modeling with Simcenter 3D Robin Boeykens robin.boeykens@siemens.com Realize innovation. 3D CAE for the digital twin Simcenter 3D Page 2 Simcenter 3D Engineering Desktop Simcenter 3D Engineering
More informationDesign and Analysis of Multi-Factored Experiments
Design and Analysis of Multi-Factored Experiments Response Surface Methodology (RSM) L. M. Lye DOE Course Introduction to Response Surface Methodology (RSM) Best and most comprehensive reference: R. H.
More informationSimcenter 3D Structures
Simcenter 3D Structures Integrating FE modeling and simulation streamlines product development Benefits Speed simulation processes by up to 70 percent Perform accurate, reliable structural analysis with
More information2D CAD. Courseware Issued: DURATION: 64 hrs
2D CAD Introduction File management Orthographic drawings View management Display management Layer management Selection methods Parametric drawings Symbol creation using block BOM / Joinery details creation
More informationNX for Simulation: Product capabilities in NX 8
for : Product capabilities in NX 8 NX 8.0 for capability chart Add-on products to or Advanced Included in module NX Updating NX Design NX Motion Preprocessing Geometry import Neutral geometry transfer
More information2 nd Optimization & Stochastic Days India 2012
Report 2 nd Optimization & Stochastic Days India 2012 December 3 4, 2012 9:00 Registrations Agenda Day 1 Seminar 9:50 Welcome by CADFEM 10:00 KEYNOTE: Why Robust Design Optimization in Virtual Product
More informationTopology-Optimization for internal Fluid Flow: TOSCA Fluid FE-DESIGN the optimization company
Topology-Optimization for internal Fluid Flow: TOSCA Fluid CFD topology optimization for channel flow Task: Find a geometrical proposal for a channel within a fluid design space: For each fluid cell decide:?
More informationQstatLab: software for statistical process control and robust engineering
QstatLab: software for statistical process control and robust engineering I.N.Vuchkov Iniversity of Chemical Technology and Metallurgy 1756 Sofia, Bulgaria qstat@dir.bg Abstract A software for quality
More informationThe new HyperMesh - Samcef interface.
The new HyperMesh - Samcef interface. Deployment and industrial applications at Eurocopter. Ronan PITOIS Dynamic systems dpt. Presentation plan Eurocopter overview Stress computation performed in Eurocopter
More informationOn graph-based design languages for consistent multi-disciplinary models
Presented at: Rudolph, S.: On graph-based design languages for consistent multi-disciplinary models. 9th MODPROD May 11, Workshop 2011 on Model-Based Product Development, Linköping University, Sweden,
More informationParametric. Practices. Patrick Cunningham. CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved.
Parametric Modeling Best Practices Patrick Cunningham July, 2012 CAE Associates Inc. and ANSYS Inc. Proprietary 2012 CAE Associates Inc. and ANSYS Inc. All rights reserved. E-Learning Webinar Series This
More informationOptimization with LS-OPT: Possibilities and new developments in LS-OPT 6.0
Infotag ANSA/LS-OPT/META Optimization with LS-OPT: Possibilities and new developments in LS-OPT 6.0 Nielen Stander (LSTC) Katharina Witowski (DYNAmore GmbH) Stuttgart, 05.02.2018 Outline About LS-OPT Methodologies
More informationMulti-Disciplinary Optimization with Minamo
EXCELLENCE IN SIMULATION TECHNOLOGIES Multi-Disciplinary Optimization with Minamo Ingrid Lepot Numerical Methods and Optimization Group, Cenaero CESAR Training Workshop, Mar 18, 2009 Surrogate Based Optimization
More informationModern Experimental Design
Modern Experimental Design THOMAS P. RYAN Acworth, GA Modern Experimental Design Modern Experimental Design THOMAS P. RYAN Acworth, GA Copyright C 2007 by John Wiley & Sons, Inc. All rights reserved.
More informationDesign of Experiments
Seite 1 von 1 Design of Experiments Module Overview In this module, you learn how to create design matrices, screen factors, and perform regression analysis and Monte Carlo simulation using Mathcad. Objectives
More informationOptimization of an Adaptive Restraint System Using LS-OPT and Visual Exploration of the Design Space Using D-SPEX
9 th International LS-DYNA Users Conference Optimization Optimization of an Adaptive Restraint System Using LS-OPT and Visual Exploration of the Design Space Using D-SPEX Marko Thiele and Heiner Mullerschön
More informationStreamlining the CAE Durability Process
Streamlining the CAE Durability Process Product Details Product Overview: ncode DesignLife provides fatigue life prediction from finite element results to answer the question how long will it last? or
More informationDYNARDO Robust Design Optimization Workshop Dynardo GmbH Robustness & Reliability Analysis
Robustness & Reliability Analysis 1 Start Robust Design Optimization Robust Design Variance based Robustness Evaluation Probability based Robustness Evaluation, (Reliability analysis) Optimization Sensitivity
More informationMultidisciplinary System Design Optimization (MSDO) Course Summary
Multidisciplinary System Design Optimization (MSDO) Course Summary Lecture 23 Prof. Olivier de Weck Prof. Karen Willcox 1 Outline Summarize course content Present some emerging research directions Interactive
More informationMulti-Objective Optimization of Gatling gun Tripod Based on Mesh. Morphing and RBF Model
Multi-Objective Optimization of Gatling gun Tripod Based on Mesh Morphing and RBF Model BINBIN HUA, RUILIN WANG, YONGJIAN LI, XIAOYONG KANG, HAO TIAN Department of Mechanical Engineering Shijiazhuang Mechanical
More informationEnSight. Process Even the Largest Datasets with ANSYS EnSight Enterprise
EnSight EnSight Analyze, visualize and communicate your simulation data with EnSight. Engineers use this powerful general purpose post-processing tool to gain new design insights and then clearly, effectively
More informationMaterials Modelling and Interoperability Siemens PLM Vision
Materials Modelling and Interoperability Siemens PLM Vision November 2017 Realize innovation. Siemens PLM Simulation & Test Solutions Mission: Help end user industry to manufacture better products more
More informationFRAUNHOFER INSTITUTE FOR ALGORITHMS AND SCIENTIFIC COMPUTING SCAI
FRAUNHOFER INSTITUTE FOR ALGORITHMS AND SCIENTIFIC COMPUTING SCAI MpCCI 4.5.2 Release Notes MpCCI 4.5.2 GUI Improve the start and error management of simulation codes in MpCCI GUI. Enhanced rules lists
More informationReliability - Based Robust Design Optimization of Centrifugal Pump Impeller for Performance Improvement considering Uncertainties in Design Variable
Reliability - Based Robust Design Optimization of Centrifugal Pump Impeller for Performance Improvement considering Uncertainties in Design Variable M.Balamurugan Assistant Professor, Government College
More informationAn advanced RBF Morph application: coupled CFD-CSM Aeroelastic Analysis of a Full Aircraft Model and Comparison to Experimental Data
An advanced RBF Morph application: coupled CFD-CSM Aeroelastic Analysis of a Full Aircraft Model and Comparison to Experimental Data Dr. Marco Evangelos Biancolini Tor Vergata University, Rome, Italy Dr.
More informationFemap Thermal & Flow V11
Femap Thermal & Flow V11 by Carl J. Poplawsky presented to Femap Symposium Ann Arbor, MI. date June 4th, 2015 MAYA Company Overview OEM Foundation Siemens PLM Partner 30+ years Software Developer Femap
More informationRecent developments. the dynardo Team
Recent developments the dynardo Team version 3.1.0 Significantly improved quality management V3.1.0_rcx: since September 2009 in productive use V3.1.0: Release October 2009 History of productive versions
More informationKEYWORDS Morphing, CAE workflow, Optimization, Automation, DOE, Regression, CFD, FEM, Python
DESIGN OPTIMIZATION WITH ANSA MORPH 1 Tobias Eidevåg *, 1 David Tarazona Ramos *, 1 Mohammad El-Alti 1 Alten AB, Sweden KEYWORDS Morphing, CAE workflow, Optimization, Automation, DOE, Regression, CFD,
More informationNeue Entwicklungen in LS-OPT 4.1 Ausblick auf zukünftige Versionen New Developments in LS-OPT 4.1 Outlook
Neue Entwicklungen in LS-OPT 4.1 Ausblick auf zukünftige Versionen New Developments in LS-OPT 4.1 Outlook Heiner Müllerschön hm@dynamore.de DYNAmore GmbH Industriestraße 2 70565 Stuttgart http://www.dynamore.de
More informationNX for Simulation: Product capabilities in NX 10
for Simulation: Product capabilities in 10 CAE Advanced Simulation Advanced Advanced Fluid Flow Advanced Flow Electronic Systems Space Systems Laminate Composites Response Simulation Durability Wizard
More informationEnSight October 2013 Japan EnSight User Meeting Tokyo, Japan. Darin McKinnis VP Sales and Marketing
EnSight 10.1 October 2013 Japan EnSight User Meeting Tokyo, Japan Darin McKinnis VP Sales and Marketing darin@ceisoftware.com Business Reports 2012 was our best year in company history > 95% renewal rate
More informationJMAG-Designer Next Generation Electromagnetic Simulation Pre/Post System
JMAG-Designer Next Generation Electromagnetic Simulation Pre/Post System Draft Engineering Technology Division JRI Solutions, Ltd. 1 Contents Introduction Transition from JMAG-Designer to JMAG Concept
More informationLecture 9: Ultra-Fast Design of Ring Oscillator
Lecture 9: Ultra-Fast Design of Ring Oscillator CSCE 6933/5933 Instructor: Saraju P. Mohanty, Ph. D. NOTE: The figures, text etc included in slides are borrowed from various books, websites, authors pages,
More informationSpeed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester
Speed and Accuracy of CFD: Achieving Both Successfully ANSYS UK S.A.Silvester 2010 ANSYS, Inc. All rights reserved. 1 ANSYS, Inc. Proprietary Content ANSYS CFD Introduction ANSYS, the company Simulation
More informationCAE Data Management and Quality Assessment of LS-DYNA Crash Models using V-CESS
4 th European LS-DYNA Users Conference LS-DYNA Environment I CAE Data Management and Quality Assessment of LS-DYNA Crash Models using V-CESS Authors: Matthias Eick, Dr. Lars Fredriksson, Dr. Jochen Seybold
More informationPractical Examples of Efficient Design Optimisation by Coupling VR&D GENESIS and LS-DYNA
Practical Examples of Efficient Design Optimisation by Coupling VR&D GENESIS and LS-DYNA David Salway, GRM Consulting Ltd. UK. Paul-André Pierré, GRM Consulting Ltd. UK. Martin Liebscher, Dynamore GMBH,
More informationOptimization of an Axial Pump using CFturbo, PumpLinx & optislang
13th Annual Weimar Optimization and Stochastic Days 2016 Conference for CAE-based parametric optimization, stochastic analysis and Robust Design Optimization Optimization of an Axial Pump using CFturbo,
More informationFaculty of Science and Technology MASTER S THESIS
Faculty of Science and Technology MASTER S THESIS Study program/ Specialization: Petroleum Engineering/Reservoir Engineering Writer : Ibnu Hafidz Arief Faculty supervisor: Prof.Dr. Hans Spring semester,
More informationAltair HyperWorks: A Platform for Innovation. Vladimir Obukhov Technical Consultant Altair Engineering GmbH
Altair HyperWorks: A Platform for Innovation Vladimir Obukhov Technical Consultant Altair Engineering GmbH HyperWorks Desktop Integration Typical FEA Process IMPORT FROM CAD or CAE World CAD CAE 1) GEOMETRY
More informationPiero Marcolongo, M.S. Alberto Bassanese Design Optimization Applied to the Solar Industry
Piero Marcolongo, M.S. piero@ozeninc.com Alberto Bassanese alberto.bassanese@ozeninc.com Design Optimization Applied to the Solar Industry Process Integration and Desing Optimization The P.I.D.O. (Process
More informationIntegrierte Optimierung mit ANSA, LS-OPT und META
DYNAmore Infoveranstaltung Integrierte Optimierung mit ANSA, LS-OPT und META Heiner Müllerschön DYNAmore GmbH Stuttgart, 01. März 2012 1 Einordnung Lineare / Nichtlineare Optimierung Introduction Optimization
More informationADVANCED POST-PROCESSING OF RESULT FROM MOLDFLOW / MOLDEX3D AND EXTENSION
ADVANCED POST-PROCESSING OF RESULT FROM MOLDFLOW / MOLDEX3D AND EXTENSION 1 Jing Jin * 2 Chenling Jiang * 3 Zhenyi Cao * 1 BASF /Performance Material, China 2 University of Victoria /Department of Mechanical
More informationInnov Day Composites
Innov Day Composites Simuler les composites et leur mise en forme avec HyperWorks Innovation Intelligence Pierre-Christophe MASSON 23 Octobre 2014 About Us We help businesses succeed through the development
More informationASSOCIATIVE SIZING OF AERONAUTICAL STRUCTURES FROM CATIA V5 TO SAMCEF : APPLICATIONS TO STATIC AND BIRD IMPACT ANALYSES
ASSOCIATIVE SIZING OF AERONAUTICAL STRUCTURES FROM CATIA V5 TO SAMCEF : APPLICATIONS TO STATIC AND BIRD IMPACT ANALYSES A.P. Gonze & J. Verstuyft SONACA S.A. Abstract : This paper presents an associative
More informationDesign of Experiments (DOE) in New Product Design & Development
Design of Experiments (DOE) in New Product Design & Development 31 st Annual International Test & Evaluation Symposium 7 October 2014 Arlington, VA 14-DFSSLE-10A Air Academy Associates Office: +1 719-531-0777
More informationMETA Post Toolbars. Introduction
META Post Toolbars Introduction The modern CAE processes require the use of software that can assist in meeting strict deadlines and offer increased level of automation. Moreover, the CAE processes often
More information)(0$3 Release Notes. Version 7.1
)(0$3 Release Notes Version 7.1 FEMAP Version 7.1 Release Notes Copyright 1986-2000 by Structural Dynamics Research Corp. Proprietary Data. Unauthorized use, distribution, or duplication is prohibited.
More informationComputer-aided Calibration of IGBT SPICE Model with optislang
Computer-aided Calibration of IGBT SPICE Model with optislang WOST 2018 2018-06-21 A. Biswas, M. Cotorogea, P. Türkes, F.J. Niedernostheide Infineon Technologies AG Special thanks: Rene Kallmeyer (Dynardo)
More informationFor Structural analysis, Thermal analysis, Mechanisms simulation and other Fields
What is SAMCEF Field? An Integrated Environment for CAE Modeling, Analysis and Results processing For Structural analysis, Thermal analysis, Mechanisms simulation and other Fields SAMTECH s.a. - www.samcef.com
More informationRBF Morph An Add-on Module for Mesh Morphing in ANSYS Fluent
RBF Morph An Add-on Module for Mesh Morphing in ANSYS Fluent Gilles Eggenspieler Senior Product Manager 1 Morphing & Smoothing A mesh morpher is a tool capable of performing mesh modifications in order
More informationComposite Materials Multi Objective Optimization using ANSA, META and modefrontier
Composite Materials Multi Objective Optimization using ANSA, META and modefrontier Introduction As the composite materials market expands and more applications appear in the automotive, aerospace and naval
More information