GL9: Engineering Communications. GL9: CAD techniques. Curves Surfaces Solids Techniques
|
|
|
- Melvin Bridges
- 5 years ago
- Views:
Transcription
1 Engineering Communications GL9:1 GL9: CAD techniques Curves Surfaces Solids Techniques
2 Parametric curves GL9:2 x = a 1 + b 1 u + c 1 u 2 + d 1 u 3 + y = a 2 + b 2 u + c 2 u 2 + d 2 u 3 + z = a 3 + b 3 u + c 3 u 2 + d 3 u 3 + Again, u is a parameter. Vector notation is more compact. E.g., a parametric cubic curve: R(u) = A + Bu + Cu 2 + Du 3 It is difficult to control the shape of the curve by altering the coefficients.
3 GL9:3 Bézier curves Input a series of points to form a track Curve passes through first and last track points Gradient at first and last points set by first and last track lines P 1 P 2 P 3 P 0
4 3.5 Effect of moving P 2 GL9: z x
5 3.5 Effect of moving P 2 GL9: z x
6 3.5 Effect of moving P 2 GL9: z x
7 3.5 Effect of moving P 2 GL9: z Disadvantage: moving one control point affects shape of whole curve x
8 GL9:8 Splines composite curve passing through a series of defined points continuity of slope parametric cubic curve segments
9 GL9:9 B-splines Combine controllability of the Bézier curve, with stability over long spans of composite curve a blended, piecewise polynomial curve passing near a set of control points weighting functions are piecewise moving a control point affects the curve only near that point, not the whole curve order of polynomial independent of number of control points
10 GL9:10 B-splines original B-spline curve moved vertex adjusted curve affected only near vertex and its neighbours
11 GL9:11 NURBs Non-Uniform Rational B-splines control points can be weighted differently range of possibilities, from curve fitting all control points, to curve only loosely controlled by control points allow exact representation of conic curves (circle, ellipse, parabola, hyperbola) give great control over line shape use set of control points and knots spacing of knots determines range of influence of weighting functions
12 GL9:12 Surface modelling Cross-sectional surfaces surface specified in terms of its cross-sections Swept surface constant cross-section shape swept along a trajectory, with possible scale change Lofted surface different cross-section shapes blended (e.g., ships, aircraft)
13 Example swept surfaces GL9:13
14 Example lofted surface GL9:14
15 GL9:15 Surface is lofted Example cross-sections: yacht hull
16 GL9:16 Sculptured surfaces Just as long curves constructed piecewise with splines, extended surfaces can be formed from a number of patches e.g., Bicubic surface patch D 1 (v) P 11 C 1 (u) Need to ensure continuity of patches P 10 C 0 (u) u P 00 v D 0 (v) P 01 edge curve discontinuity
17 GL9:17 Solid modelling Represent solids: completely and unambiguously topology consistent Two schemes: Boundary representation (B-rep) Constructive Solid Geometry (CSG)
18 B-rep models GL9:18 Topological consistency all faces, edges, vertices accounted for Data structure describes the boundaries of the solid topology described in a network which represents connectivity of vertices, edges and faces geometry (points, curves and surfaces) described separately geometry linked to topology face surface edge curve vertex point
19 Winged-edge data structure GL9:19 Bi-directional pointers from every edge to its: two end vertices two adjacent faces, and four other edges that share a face and vertex with it Left edge anti-clockwise E Next vertex V E Right edge clockwise Left face F E Current edge F Right face Left edge clockwise E V Previous vertex E Right edge anti-c.w.
20 Constructive Solid Geometry (CSG) GL9:20 Solid represented as Boolean combination of simpler solids (primitives) a b
21 Example of CSG construction GL9:21 Record Boolean operations in a tree structure: U A B C or as a line of Boolean algebra: A U (B - C)
22 03sg02_a.flc Creation of a composite solid GL9:22
23 03sg03_a.flc Creation of a composite model GL9:23
24 GL9:24 CAD techniques Read Bertoline sections 7.6: 3-D Construction techniques 7.7: 3-D Viewing techniques 7.8: Object modification 7.9: Constraint-based modelling 7.10: Feature-based modelling Web-based instructions for Lab C1 access from home page
3D Modeling Parametric Curves & Surfaces
3D Modeling Parametric Curves & Surfaces Shandong University Spring 2012 3D Object Representations Raw data Point cloud Range image Polygon soup Solids Voxels BSP tree CSG Sweep Surfaces Mesh Subdivision
3D Modeling Parametric Curves & Surfaces. Shandong University Spring 2013
3D Modeling Parametric Curves & Surfaces Shandong University Spring 2013 3D Object Representations Raw data Point cloud Range image Polygon soup Surfaces Mesh Subdivision Parametric Implicit Solids Voxels
Rational Bezier Curves
Rational Bezier Curves Use of homogeneous coordinates Rational spline curve: define a curve in one higher dimension space, project it down on the homogenizing variable Mathematical formulation: n P(u)
Curve Representation ME761A Instructor in Charge Prof. J. Ramkumar Department of Mechanical Engineering, IIT Kanpur
Curve Representation ME761A Instructor in Charge Prof. J. Ramkumar Department of Mechanical Engineering, IIT Kanpur Email: jrkumar@iitk.ac.in Curve representation 1. Wireframe models There are three types
Geometric Modeling Systems
Geometric Modeling Systems Wireframe Modeling use lines/curves and points for 2D or 3D largely replaced by surface and solid models Surface Modeling wireframe information plus surface definitions supports
Curves and Surfaces 1
Curves and Surfaces 1 Representation of Curves & Surfaces Polygon Meshes Parametric Cubic Curves Parametric Bi-Cubic Surfaces Quadric Surfaces Specialized Modeling Techniques 2 The Teapot 3 Representing
VALLIAMMAI ENGINEERING COLLEGE
VALLIAMMAI ENGINEERING COLLEGE SRM Nagar, Kattankulathur 603 203 DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK M.E: CAD/CAM I SEMESTER ED5151 COMPUTER APPLICATIONS IN DESIGN Regulation 2017 Academic
Rational Bezier Surface
Rational Bezier Surface The perspective projection of a 4-dimensional polynomial Bezier surface, S w n ( u, v) B i n i 0 m j 0, u ( ) B j m, v ( ) P w ij ME525x NURBS Curve and Surface Modeling Page 97
Interactive Graphics. Lecture 9: Introduction to Spline Curves. Interactive Graphics Lecture 9: Slide 1
Interactive Graphics Lecture 9: Introduction to Spline Curves Interactive Graphics Lecture 9: Slide 1 Interactive Graphics Lecture 13: Slide 2 Splines The word spline comes from the ship building trade
Computergrafik. Matthias Zwicker Universität Bern Herbst 2016
Computergrafik Matthias Zwicker Universität Bern Herbst 2016 Today Curves NURBS Surfaces Parametric surfaces Bilinear patch Bicubic Bézier patch Advanced surface modeling 2 Piecewise Bézier curves Each
LECTURE #6. Geometric Modelling for Engineering Applications. Geometric modeling for engineering applications
LECTURE #6 Geometric modeling for engineering applications Geometric Modelling for Engineering Applications Introduction to modeling Geometric modeling Curve representation Hermite curve Bezier curve B-spline
Fall CSCI 420: Computer Graphics. 4.2 Splines. Hao Li.
Fall 2014 CSCI 420: Computer Graphics 4.2 Splines Hao Li http://cs420.hao-li.com 1 Roller coaster Next programming assignment involves creating a 3D roller coaster animation We must model the 3D curve
Introduction p. 1 What Is Geometric Modeling? p. 1 Computer-aided geometric design Solid modeling Algebraic geometry Computational geometry
Introduction p. 1 What Is Geometric Modeling? p. 1 Computer-aided geometric design Solid modeling Algebraic geometry Computational geometry Representation Ab initio design Rendering Solid modelers Kinematic
Shape Representation Basic problem We make pictures of things How do we describe those things? Many of those things are shapes Other things include
Shape Representation Basic problem We make pictures of things How do we describe those things? Many of those things are shapes Other things include motion, behavior Graphics is a form of simulation and
B-spline Curves. Smoother than other curve forms
Curves and Surfaces B-spline Curves These curves are approximating rather than interpolating curves. The curves come close to, but may not actually pass through, the control points. Usually used as multiple,
COMPUTER AIDED ENGINEERING DESIGN (BFF2612)
COMPUTER AIDED ENGINEERING DESIGN (BFF2612) BASIC MATHEMATICAL CONCEPTS IN CAED by Dr. Mohd Nizar Mhd Razali Faculty of Manufacturing Engineering mnizar@ump.edu.my COORDINATE SYSTEM y+ y+ z+ z+ x+ RIGHT
Physically-Based Modeling and Animation. University of Missouri at Columbia
Overview of Geometric Modeling Overview 3D Shape Primitives: Points Vertices. Curves Lines, polylines, curves. Surfaces Triangle meshes, splines, subdivision surfaces, implicit surfaces, particles. Solids
COMP3421. Global Lighting Part 2: Radiosity
COMP3421 Global Lighting Part 2: Radiosity Recap: Global Lighting The lighting equation we looked at earlier only handled direct lighting from sources: We added an ambient fudge term to account for all
Computergrafik. Matthias Zwicker. Herbst 2010
Computergrafik Matthias Zwicker Universität Bern Herbst 2010 Today Curves NURBS Surfaces Parametric surfaces Bilinear patch Bicubic Bézier patch Advanced surface modeling Piecewise Bézier curves Each segment
Splines. Parameterization of a Curve. Curve Representations. Roller coaster. What Do We Need From Curves in Computer Graphics? Modeling Complex Shapes
CSCI 420 Computer Graphics Lecture 8 Splines Jernej Barbic University of Southern California Hermite Splines Bezier Splines Catmull-Rom Splines Other Cubic Splines [Angel Ch 12.4-12.12] Roller coaster
Fathi El-Yafi Project and Software Development Manager Engineering Simulation
An Introduction to Geometry Design Algorithms Fathi El-Yafi Project and Software Development Manager Engineering Simulation 1 Geometry: Overview Geometry Basics Definitions Data Semantic Topology Mathematics
CS 475 / CS Computer Graphics. Modelling Curves 3 - B-Splines
CS 475 / CS 675 - Computer Graphics Modelling Curves 3 - Bézier Splines n P t = i=0 No local control. B i J n,i t with 0 t 1 J n,i t = n i t i 1 t n i Degree restricted by the control polygon. http://www.cs.mtu.edu/~shene/courses/cs3621/notes/spline/bezier/bezier-move-ct-pt.html
Curves and Curved Surfaces. Adapted by FFL from CSE167: Computer Graphics Instructor: Ronen Barzel UCSD, Winter 2006
Curves and Curved Surfaces Adapted by FFL from CSE167: Computer Graphics Instructor: Ronen Barzel UCSD, Winter 2006 Outline for today Summary of Bézier curves Piecewise-cubic curves, B-splines Surface
Computer Aided Engineering Applications 3. Advanced Manufacturing
Computer Aided Engineering Applications 3. Advanced Manufacturing 3.1 CAM systems 3.2 Geometry of surfaces 3.3 Product data exchange 3.4 Data Communication 3.5 Automated Manufacturing systems 3.6 Part
CATIA V4/V5 Interoperability Project 2 : Migration of V4 surface : Influence of the transfer s settings Genta Yoshioka
CATIA V4/V5 Interoperability Project 2 : Migration of V4 surface : Influence of the transfer s settings Genta Yoshioka Version 1.0 03/08/2001 CATIA Interoperability Project Office CIPO IBM Frankfurt, Germany
Lecture 1 Course Introduction
UMass Lowell Computer Science 91.580.201 Geometric Modeling Prof. Karen Daniels Spring, 2009 Lecture 1 Course Introduction Course Introduction What is Geometric Modeling? Adapted from: Geometric Modeling
CS3621 Midterm Solution (Fall 2005) 150 points
CS362 Midterm Solution Fall 25. Geometric Transformation CS362 Midterm Solution (Fall 25) 5 points (a) [5 points] Find the 2D transformation matrix for the reflection about the y-axis transformation (i.e.,
Parametric Curves. University of Texas at Austin CS384G - Computer Graphics Fall 2010 Don Fussell
Parametric Curves University of Texas at Austin CS384G - Computer Graphics Fall 2010 Don Fussell Parametric Representations 3 basic representation strategies: Explicit: y = mx + b Implicit: ax + by + c
Modeling 3D Objects: Part 2
Modeling 3D Objects: Part 2 Patches, NURBS, Solids Modeling, Spatial Subdivisioning, and Implicit Functions 3D Computer Graphics by Alan Watt Third Edition, Pearson Education Limited, 2000 General Modeling
Introduction to the Mathematical Concepts of CATIA V5
CATIA V5 Training Foils Introduction to the Mathematical Concepts of CATIA V5 Version 5 Release 19 January 2009 EDU_CAT_EN_MTH_FI_V5R19 1 About this course Objectives of the course Upon completion of this
Geometry Definition in the ADINA User Interface (AUI) Daniel Jose Payen, Ph.D. March 7, 2016
Geometry Definition in the ADINA User Interface (AUI) Daniel Jose Payen, Ph.D. March 7, 2016 ADINA R&D, Inc., 2016 1 Topics Presented ADINA에서쓰이는 Geometry 종류 Simple (AUI) geometry ADINA-M geometry ADINA-M
(Refer Slide Time: 00:02:24 min)
CAD / CAM Prof. Dr. P. V. Madhusudhan Rao Department of Mechanical Engineering Indian Institute of Technology, Delhi Lecture No. # 9 Parametric Surfaces II So these days, we are discussing the subject
CSG obj. oper3. obj1 obj2 obj3. obj5. obj4
Solid Modeling Solid: Boundary + Interior Volume occupied by geometry Solid representation schemes Constructive Solid Geometry (CSG) Boundary representations (B-reps) Space-partition representations Operations
OUTLINE. Quadratic Bezier Curves Cubic Bezier Curves
BEZIER CURVES 1 OUTLINE Introduce types of curves and surfaces Introduce the types of curves Interpolating Hermite Bezier B-spline Quadratic Bezier Curves Cubic Bezier Curves 2 ESCAPING FLATLAND Until
Parametric Curves. University of Texas at Austin CS384G - Computer Graphics
Parametric Curves University of Texas at Austin CS384G - Computer Graphics Fall 2010 Don Fussell Parametric Representations 3 basic representation strategies: Explicit: y = mx + b Implicit: ax + by + c
Curves and Surfaces Computer Graphics I Lecture 10
15-462 Computer Graphics I Lecture 10 Curves and Surfaces Parametric Representations Cubic Polynomial Forms Hermite Curves Bezier Curves and Surfaces [Angel 10.1-10.6] September 30, 2003 Doug James Carnegie
Bézier Splines. B-Splines. B-Splines. CS 475 / CS 675 Computer Graphics. Lecture 14 : Modelling Curves 3 B-Splines. n i t i 1 t n i. J n,i.
Bézier Splines CS 475 / CS 675 Computer Graphics Lecture 14 : Modelling Curves 3 n P t = B i J n,i t with 0 t 1 J n, i t = i=0 n i t i 1 t n i No local control. Degree restricted by the control polygon.
Curves. Computer Graphics CSE 167 Lecture 11
Curves Computer Graphics CSE 167 Lecture 11 CSE 167: Computer graphics Polynomial Curves Polynomial functions Bézier Curves Drawing Bézier curves Piecewise Bézier curves Based on slides courtesy of Jurgen
Intro to Modeling Modeling in 3D
Intro to Modeling Modeling in 3D Polygon sets can approximate more complex shapes as discretized surfaces 2 1 2 3 Curve surfaces in 3D Sphere, ellipsoids, etc Curved Surfaces Modeling in 3D ) ( 2 2 2 2
Surface Modeling. Polygon Tables. Types: Generating models: Polygon Surfaces. Polygon surfaces Curved surfaces Volumes. Interactive Procedural
Surface Modeling Types: Polygon surfaces Curved surfaces Volumes Generating models: Interactive Procedural Polygon Tables We specify a polygon surface with a set of vertex coordinates and associated attribute
Parametric Surfaces. Michael Kazhdan ( /657) HB , FvDFH 11.2
Parametric Surfaces Michael Kazhdan (601.457/657) HB 10.6 -- 10.9, 10.1 FvDFH 11.2 Announcement OpenGL review session: When: Wednesday (10/1) @ 7:00-9:00 PM Where: Olin 05 Cubic Splines Given a collection
3D Modeling techniques
3D Modeling techniques 0. Reconstruction From real data (not covered) 1. Procedural modeling Automatic modeling of a self-similar objects or scenes 2. Interactive modeling Provide tools to computer artists
Flank Millable Surface Design with Conical and Barrel Tools
461 Computer-Aided Design and Applications 2008 CAD Solutions, LLC http://www.cadanda.com Flank Millable Surface Design with Conical and Barrel Tools Chenggang Li 1, Sanjeev Bedi 2 and Stephen Mann 3 1
Geometric and Solid Modeling. Problems
Geometric and Solid Modeling Problems Define a Solid Define Representation Schemes Devise Data Structures Construct Solids Page 1 Mathematical Models Points Curves Surfaces Solids A shape is a set of Points
2D Spline Curves. CS 4620 Lecture 13
2D Spline Curves CS 4620 Lecture 13 2008 Steve Marschner 1 Motivation: smoothness In many applications we need smooth shapes [Boeing] that is, without discontinuities So far we can make things with corners
CSE 167: Introduction to Computer Graphics Lecture #13: Curves. Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2017
CSE 167: Introduction to Computer Graphics Lecture #13: Curves Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2017 Announcements Project 4 due Monday Nov 27 at 2pm Next Tuesday:
From curves to surfaces. Parametric surfaces and solid modeling. Extrusions. Surfaces of revolution. So far have discussed spline curves in 2D
From curves to surfaces Parametric surfaces and solid modeling CS 465 Lecture 12 2007 Doug James & Steve Marschner 1 So far have discussed spline curves in 2D it turns out that this already provides of
Introduction to Solid Modeling Parametric Modeling. Mechanical Engineering Dept.
Introduction to Solid Modeling Parametric Modeling 1 Why draw 3D Models? 3D models are easier to interpret. Simulation under real-life conditions. Less expensive than building a physical model. 3D models
The goal is the definition of points with numbers and primitives with equations or functions. The definition of points with numbers requires a
The goal is the definition of points with numbers and primitives with equations or functions. The definition of points with numbers requires a coordinate system and then the measuring of the point with
Central issues in modelling
Central issues in modelling Construct families of curves, surfaces and volumes that can represent common objects usefully; are easy to interact with; interaction includes: manual modelling; fitting to
Curves and Surfaces for Computer-Aided Geometric Design
Curves and Surfaces for Computer-Aided Geometric Design A Practical Guide Fourth Edition Gerald Farin Department of Computer Science Arizona State University Tempe, Arizona /ACADEMIC PRESS I San Diego
Until now we have worked with flat entities such as lines and flat polygons. Fit well with graphics hardware Mathematically simple
Curves and surfaces Escaping Flatland Until now we have worked with flat entities such as lines and flat polygons Fit well with graphics hardware Mathematically simple But the world is not composed of
Curves and Surfaces Computer Graphics I Lecture 9
15-462 Computer Graphics I Lecture 9 Curves and Surfaces Parametric Representations Cubic Polynomial Forms Hermite Curves Bezier Curves and Surfaces [Angel 10.1-10.6] February 19, 2002 Frank Pfenning Carnegie
Lecture 4b. Surface. Lecture 3 1
Lecture 4b Surface Lecture 3 1 Surface More complete and less ambiguous representation than its wireframe representation Can be considered as extension to wireframe representation In finite element, surface
Curve and Surface Basics
Curve and Surface Basics Implicit and parametric forms Power basis form Bezier curves Rational Bezier Curves Tensor Product Surfaces ME525x NURBS Curve and Surface Modeling Page 1 Implicit and Parametric
Les Piegl Wayne Tiller. The NURBS Book. Second Edition with 334 Figures in 578 Parts. A) Springer
Les Piegl Wayne Tiller The NURBS Book Second Edition with 334 Figures in 578 Parts A) Springer CONTENTS Curve and Surface Basics 1.1 Implicit and Parametric Forms 1 1.2 Power Basis Form of a Curve 5 1.3
15.10 Curve Interpolation using Uniform Cubic B-Spline Curves. CS Dept, UK
1 An analysis of the problem: To get the curve constructed, how many knots are needed? Consider the following case: So, to interpolate (n +1) data points, one needs (n +7) knots,, for a uniform cubic B-spline
Design considerations
Curves Design considerations local control of shape design each segment independently smoothness and continuity ability to evaluate derivatives stability small change in input leads to small change in
Dgp _ lecture 2. Curves
Dgp _ lecture 2 Curves Questions? This lecture will be asking questions about curves, their Relationship to surfaces, and how they are used and controlled. Topics of discussion will be: Free form Curves
The Free-form Surface Modelling System
1. Introduction The Free-form Surface Modelling System Smooth curves and surfaces must be generated in many computer graphics applications. Many real-world objects are inherently smooth (fig.1), and much
Subdivision surfaces for CAD: integration through parameterization and local correction
Workshop: New trends in subdivision and related applications September 4 7, 212 Department of Mathematics and Applications, University of Milano-Bicocca, Italy Subdivision surfaces for CAD: integration
Shape Control of Cubic H-Bézier Curve by Moving Control Point
Journal of Information & Computational Science 4: 2 (2007) 871 878 Available at http://www.joics.com Shape Control of Cubic H-Bézier Curve by Moving Control Point Hongyan Zhao a,b, Guojin Wang a,b, a Department
CSE 167: Introduction to Computer Graphics Lecture #11: Bezier Curves. Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2016
CSE 167: Introduction to Computer Graphics Lecture #11: Bezier Curves Jürgen P. Schulze, Ph.D. University of California, San Diego Fall Quarter 2016 Announcements Project 3 due tomorrow Midterm 2 next
Spline Morphing. CG software practical course in the IWR. Carl Friedrich Bolz. Carl Friedrich Bolz
Spline Morphing CG software practical course in the IWR Introduction Motivation: Splines are an important part n of vector graphics, 3D-graphics, CAD/CAM,... Splines are often used to describe characters,
Solid Modeling Lecture Series. Prof. Gary Wang Department of Mechanical and Manufacturing Engineering The University of Manitoba
Solid Modeling 25.353 Lecture Series Prof. Gary Wang Department of Mechanical and Manufacturing Engineering The University of Manitoba Information complete, unambiguous, accurate solid model Solid Modeling
Adaptive Tessellation for Trimmed NURBS Surface
Adaptive Tessellation for Trimmed NURBS Surface Ma YingLiang and Terry Hewitt 2 Manchester Visualization Centre, University of Manchester, Manchester, M3 9PL, U.K. may@cs.man.ac.uk 2 W.T.Hewitt@man.ac.uk
Linear Precision for Parametric Patches
Department of Mathematics Texas A&M University March 30, 2007 / Texas A&M University Algebraic Geometry and Geometric modeling Geometric modeling uses polynomials to build computer models for industrial
Geometric Modeling. Introduction
Geometric Modeling Introduction Geometric modeling is as important to CAD as governing equilibrium equations to classical engineering fields as mechanics and thermal fluids. intelligent decision on the
Curves and Surfaces. Chapter 7. Curves. ACIS supports these general types of curves:
Chapter 7. Curves and Surfaces This chapter discusses the types of curves and surfaces supported in ACIS and the classes used to implement them. Curves ACIS supports these general types of curves: Analytic
2D Spline Curves. CS 4620 Lecture 18
2D Spline Curves CS 4620 Lecture 18 2014 Steve Marschner 1 Motivation: smoothness In many applications we need smooth shapes that is, without discontinuities So far we can make things with corners (lines,
Computer Graphics Curves and Surfaces. Matthias Teschner
Computer Graphics Curves and Surfaces Matthias Teschner Outline Introduction Polynomial curves Bézier curves Matrix notation Curve subdivision Differential curve properties Piecewise polynomial curves
CS130 : Computer Graphics Curves (cont.) Tamar Shinar Computer Science & Engineering UC Riverside
CS130 : Computer Graphics Curves (cont.) Tamar Shinar Computer Science & Engineering UC Riverside Blending Functions Blending functions are more convenient basis than monomial basis canonical form (monomial
CS-184: Computer Graphics
CS-184: Computer Graphics Lecture #12: Curves and Surfaces Prof. James O Brien University of California, Berkeley V2007-F-12-1.0 Today General curve and surface representations Splines and other polynomial
Computer Graphics CS 543 Lecture 13a Curves, Tesselation/Geometry Shaders & Level of Detail
Computer Graphics CS 54 Lecture 1a Curves, Tesselation/Geometry Shaders & Level of Detail Prof Emmanuel Agu Computer Science Dept. Worcester Polytechnic Institute (WPI) So Far Dealt with straight lines
B-Splines and NURBS Week 5, Lecture 9
CS 430/585 Computer Graphics I B-Splines an NURBS Week 5, Lecture 9 Davi Breen, William Regli an Maxim Peysakhov Geometric an Intelligent Computing Laboratory Department of Computer Science Drexel University
Bézier and B-spline volumes Project of Dissertation
Department of Algebra, Geometry and Didactics of Mathematics Faculty of Mathemathics, Physics and Informatics Comenius University, Bratislava Bézier and B-spline volumes Project of Dissertation Martin
08 - Designing Approximating Curves
08 - Designing Approximating Curves Acknowledgement: Olga Sorkine-Hornung, Alexander Sorkine-Hornung, Ilya Baran Last time Interpolating curves Monomials Lagrange Hermite Different control types Polynomials
To Do. Resources. Algorithm Outline. Simplifications. Advanced Computer Graphics (Spring 2013) Surface Simplification: Goals (Garland)
Advanced omputer Graphics (Spring 213) S 283, Lecture 6: Quadric Error Metrics Ravi Ramamoorthi To Do Assignment 1, Due Feb 22. Should have made some serious progress by end of week This lecture reviews
Surfacing using Creo Parametric 3.0
Surfacing using Creo Parametric 3.0 Overview Course Code Course Length TRN-4506-T 3 Days In this course, you will learn how to use various techniques to create complex surfaces with tangent and curvature
An introduction to interpolation and splines
An introduction to interpolation and splines Kenneth H. Carpenter, EECE KSU November 22, 1999 revised November 20, 2001, April 24, 2002, April 14, 2004 1 Introduction Suppose one wishes to draw a curve
TO DUY ANH SHIP CALCULATION
TO DUY ANH SHIP CALCULATION Ship Calculattion (1)-Space Cuvers 3D-curves play an important role in the engineering, design and manufature in Shipbuilding. Prior of the development of mathematical and computer
CS337 INTRODUCTION TO COMPUTER GRAPHICS. Describing Shapes. Constructing Objects in Computer Graphics. Bin Sheng Representing Shape 9/20/16 1/15
Describing Shapes Constructing Objects in Computer Graphics 1/15 2D Object Definition (1/3) Lines and polylines: Polylines: lines drawn between ordered points A closed polyline is a polygon, a simple polygon
Sung-Eui Yoon ( 윤성의 )
CS480: Computer Graphics Curves and Surfaces Sung-Eui Yoon ( 윤성의 ) Course URL: http://jupiter.kaist.ac.kr/~sungeui/cg Today s Topics Surface representations Smooth curves Subdivision 2 Smooth Curves and
Solids as point set. Solid models. Solid representation schemes (cont d) Solid representation schemes. Solid representation schemes (cont d)
Solid models Solid models developed to address limitations of wireframe modeling. Attempt was to create systems which create only complete representations. Modelers would support direct creation of 3D
Multipatched B-Spline Surfaces and Automatic Rough Cut Path Generation
Int J Adv Manuf Technol (2000) 16:100 106 2000 Springer-Verlag London Limited Multipatched B-Spline Surfaces and Automatic Rough Cut Path Generation S. H. F. Chuang and I. Z. Wang Department of Mechanical
CS-184: Computer Graphics. Today
CS-84: Computer Graphics Lecture #5: Curves and Surfaces Prof. James O Brien University of California, Berkeley V25F-5-. Today General curve and surface representations Splines and other polynomial bases
Object representation
Object representation Geri s Game Pixar 1997 Subdivision surfaces Polhemus 3d scan Over 700 controls 2 Computer Graphics Quick test #1 Describe the picture Graphical systems, visualization and multimedia
3D Modeling: Surfaces
CS 430/536 Computer Graphics I 3D Modeling: Surfaces Week 8, Lecture 16 David Breen, William Regli and Maxim Peysakhov Geometric and Intelligent Computing Laboratory Department of Computer Science Drexel
INF3320 Computer Graphics and Discrete Geometry
INF3320 Computer Graphics and Discrete Geometry More smooth Curves and Surfaces Christopher Dyken, Michael Floater and Martin Reimers 10.11.2010 Page 1 More smooth Curves and Surfaces Akenine-Möller, Haines
Chapter 4-3D Modeling
Chapter 4-3D Modeling Polygon Meshes Geometric Primitives Interpolation Curves Levels Of Detail (LOD) Constructive Solid Geometry (CSG) Extrusion & Rotation Volume- and Point-based Graphics 1 The 3D rendering
Bezier Curves, B-Splines, NURBS
Bezier Curves, B-Splines, NURBS Example Application: Font Design and Display Curved objects are everywhere There is always need for: mathematical fidelity high precision artistic freedom and flexibility
CS123 INTRODUCTION TO COMPUTER GRAPHICS. Describing Shapes. Constructing Objects in Computer Graphics 1/15
Describing Shapes Constructing Objects in Computer Graphics 1/15 2D Object Definition (1/3) Lines and polylines: Polylines: lines drawn between ordered points A closed polyline is a polygon, a simple polygon
Information Coding / Computer Graphics, ISY, LiTH. Splines
28(69) Splines Originally a drafting tool to create a smooth curve In computer graphics: a curve built from sections, each described by a 2nd or 3rd degree polynomial. Very common in non-real-time graphics,
Images from 3D Creative Magazine. 3D Modelling Systems
Images from 3D Creative Magazine 3D Modelling Systems Contents Reference & Accuracy 3D Primitives Transforms Move (Translate) Rotate Scale Mirror Align 3D Booleans Deforms Bend Taper Skew Twist Squash
Lecture 9: Introduction to Spline Curves
Lecture 9: Introduction to Spline Curves Splines are used in graphics to represent smooth curves and surfaces. They use a small set of control points (knots) and a function that generates a curve through
CK 12 Algebra II with Trigonometry Concepts 1
10.1 Parabolas with Vertex at the Origin Answers 1. up 2. left 3. down 4.focus: (0, 0.5), directrix: y = 0.5 5.focus: (0.0625, 0), directrix: x = 0.0625 6.focus: ( 1.25, 0), directrix: x = 1.25 7.focus:
Reparametrization of Interval Curves on Rectangular Domain
International Journal of Video&Image Processing and Network Security IJVIPNS-IJENS Vol:15 No:05 1 Reparametrization of Interval Curves on Rectangular Domain O. Ismail, Senior Member, IEEE Abstract The
Computer Graphics. Curves and Surfaces. Hermite/Bezier Curves, (B-)Splines, and NURBS. By Ulf Assarsson
Computer Graphics Curves and Surfaces Hermite/Bezier Curves, (B-)Splines, and NURBS By Ulf Assarsson Most of the material is originally made by Edward Angel and is adapted to this course by Ulf Assarsson.
Geometric Modeling of Curves
Curves Locus of a point moving with one degree of freedom Locus of a one-dimensional parameter family of point Mathematically defined using: Explicit equations Implicit equations Parametric equations (Hermite,
Know it. Control points. B Spline surfaces. Implicit surfaces
Know it 15 B Spline Cur 14 13 12 11 Parametric curves Catmull clark subdivision Parametric surfaces Interpolating curves 10 9 8 7 6 5 4 3 2 Control points B Spline surfaces Implicit surfaces Bezier surfaces