1st Point. 2nd Point. hold shift & drag along Y. Splines

Size: px

Start display at page:

Download "1st Point. 2nd Point. hold shift & drag along Y. Splines"

Damian Stephen Phillips
5 years ago
Views:

1 Splines STEP 1: open 3DS Max _ from the Command Panel under the Create tab click on Shapes (note: shapes are really Splines) _ under Object Type click on Ellipse STEP 2: Expand the Keyboard Entry tab type 100 Length & 80 Width _ click on Create _ press esc _ press Z to zoom extents STEP 3: command panel / create / shapes / Line _ Expand the Keyboard Entry _ click on Add Point _ enter 20 in the Z _ click on Add Point Clone - Copy 1 1st Point 2nd Point 3 STEP 4: main toolbar / Move _ hold down the shift key & drag along the Y axis _ select Copy from the Clone Options window hold shift & drag along Y 2 4 1

5 Vertex / Transform / Mirror STEP 5: from the bottom of the screen set the Y: -25

Vertex _ in the viewport select the top Vertex _ change the Absolute Mode Transform

vertex STEP 7: de-activate Vertex from the command panel _ main toolbar / Mirror _ set

click OK 7 STEP 8: lower the top vertex of the new line 5 _ de-activate Vertex save

2 5 Vertex / Transform / Mirror STEP 5: from the bottom of the screen set the Y: -25 STEP 6: command panel / Modify _ click on the + to expand Line _ click to activate Vertex _ in the viewport select the top Vertex _ change the Absolute Mode Transform (world) to Offset Mode Transform _ enter -5 for the Z: to move the vertex down select vertex STEP 7: de-activate Vertex from the command panel _ main toolbar / Mirror _ set the mirror axis to: Y _ set the offset to: 50 _ set the clone selection to: Copy _ click OK 7 STEP 8: lower the top vertex of the new line 5 _ de-activate Vertex save the Max file in your class-08 folder as: your initials_class-08.max click on move vertex down

STEP 9: Alt + W to switch to 4 viewports _ rightclick in the Left viewport to make it current _ from the main menu click on the Snaps Toggle _ rightclick on the snaps toggle _ set snaps to

left _ (note: start by snapping to the ellipse) STEP 11: command panel / activate vertex _ from the command under display check on Show Vertex Numbers 5 4 3 2 1 STEP 12: select all the

3 STEP 9: Alt + W to switch to 4 viewports _ rightclick in the Left viewport to make it current _ from the main menu click on the Snaps Toggle _ rightclick on the snaps toggle _ set snaps to Endpoint only _ click on the red X to close the window Vertex types: Corner / Smooth 9 11 STEP 10: command panel / create / shapes / Line _ using the endpoint snap draw a line from right to left _ (note: start by snapping to the ellipse) STEP 11: command panel / activate vertex _ from the command under display check on Show Vertex Numbers STEP 12: select all the verticies _ right-click _ select Smooth from the Tools 1 flyout menu _ (notice: we now have a smooth spline) _ de-activate Vertex right-click in the viewport draw a line from right to left

Attach STEP 13: right-click in the top viewport to make it current _

set the type of object to: Copy _ set the 1D count to: 6 _ click OK

first smooth spline _ command panel / scroll down under geometry _

left _ press Esc _ from the command panel re-name the spline to Base

select Reference from the Clone Options window _ re-name it Surface

CrossSection _ click on the last teapot to quick render _ (notice:

4 Attach STEP 13: right-click in the top viewport to make it current _ with the spline selected _ main menu / tools /Array _ enter x: -40 _ set the type of object to: Copy _ set the 1D count to: 6 _ click OK STEP 14: select & delete the original smooth spline _ select the first smooth spline _ command panel / scroll down under geometry _ click on Attach _ click individually on each spline from right to left _ press Esc _ from the command panel re-name the spline to Base Curve Clone - Reference STEP 15: main menu / edit / Clone (Ctrl+V) _ select Reference from the Clone Options window _ re-name it Surface Cross Section STEP 16: command panel / modifier list _ select CrossSection _ click on the last teapot to quick render _ (notice: the cross section modifier did not create a 3D renderable surface) reference bar

STEP 17: main toolbar / select from scene (Shortcut Key H) _ select Base

sub-geometry _ activate Spline STEP 18: from the perspective view select the

look at the front viewport to see the cross section is creating straight line

STEP 19: select the object named Surface _ from the command panel under

Base Curves _ command panel / modifier list _ select Edit Spline _ click on

5 STEP 17: main toolbar / select from scene (Shortcut Key H) _ select Base Curves _ from the command panel click on the + to expand line & access the sub-geometry _ activate Spline STEP 18: from the perspective view select the middle spline _ using the offset mode transform raise the spline 10 _ (a couple of things to notice: 1. the Base Curves are driving object with the cross section modifier 2. look at the front viewport to see the cross section is creating straight line segments to connect the splines) _ de-activate Spline smooth smooth STEP 19: select the object named Surface _ from the command panel under parameters / spline options _ click on Smooth Edit Spline STEP 20: select Base Curves _ command panel / modifier list _ select Edit Spline _ click on the + to expand line & access the sub-geometry _ activate Vertex _ spend some time creating a more dynamic form _ de-activate vertex straight straight

reference bar Surface STEP 21: select the object named Surface _ command panel / modifier list

above the gray reference bar is only effecting the Surface object) _ to continue the direct

click on sub-object Vertex _ (notice: the surface disappeared) _ click on the show end result

+S STEP 24: make the top viewport current _ command panel / create / geometry / Cylinder _

6 reference bar Surface STEP 21: select the object named Surface _ command panel / modifier list _ select Surface (notice: now we have a 3D renderable surface) 23 STEP 22: (note: everything above the gray reference bar is only effecting the Surface object) _ to continue the direct manipulation we don t need to keep going back to the base curve object _ expand Edit Spline _ click on sub-object Vertex _ (notice: the surface disappeared) _ click on the show end result toggle 21 STEP 23: continue to edit the form _ click on the Teapot for a quick render _ Ctrl +S STEP 24: make the top viewport current _ command panel / create / geometry / Cylinder _ expand Keyboard Entry _ enter x: -40, y: -40, Radius: 1, Height: 50 _ click Create _ press esc

Pro Cutter STEP 25: main menu / tools /Array _

Instance _ under count set 1D to: 5 _ set 2D

select the surface object _ Ctrl + V _ set type

command panel / create / geometry / Compound

Pick Stock Objects _ main toolbar / Select by

Pick _ press esc twice STEP 28: command panel /

7 Pro Cutter STEP 25: main menu / tools /Array _ enter x: -40 _ set the type of object to: Instance _ under count set 1D to: 5 _ set 2D to: 3 _ enter y: 40 _ click OK 25 STEP 26: select the surface object _ Ctrl + V _ set type of object to: Instance _ name it: Cutter _ command panel / create / geometry / Compound Objects _ click on Pro Cutter STEP 27: click on Pick Stock Objects _ main toolbar / Select by Name _ select all of the Cylinders _ click on Pick _ press esc twice STEP 28: command panel / Uncheck Stock Outside cutter _ Check on Stock Inside Cutter

Edit Patch STEP 29: select the Surface object (note:

_ command panel / modifier list _ select Edit Patch _

default no divisions are visible) _ scroll down in

Interior Edges _ set the Steps: = 3 STEP 30: (notice:

select Reference _ name the reference Structure _

modifier list _ select Edit Poly _ click on the + to

select all of the polygons STEP 32: scroll down in

settings button for Inset _ set Inset Type: By

8 Edit Patch STEP 29: select the Surface object (note: the output of a surface modifier is a patch surface) _ command panel / modifier list _ select Edit Patch _ (this modifier will divide our surface) _ (note: by default no divisions are visible) _ scroll down in the command panel under surface check on Show Interior Edges _ set the Steps: = 3 STEP 30: (notice: the spline spacing = 40 3 steps = 10 ) _ Ctrl+V _ select Reference _ name the reference Structure _ click OK Edit Poly STEP 31: command panel / modifier list _ select Edit Poly _ click on the + to expand Edit Poly _ activate Polygon _ Ctrl+A will select all of the polygons STEP 32: scroll down in the command panel _ under Edit Polygons click on the settings button for Inset _ set Inset Type: By Polygon _ set Inset Amount: 6 _ click OK _ press the Delete key 3 steps spline

Shell STEP 33: (note: everything that we have modeled thus far

the Structure) _ command panel / modifier list _ select Shell _

extrusion amount = 3 in both directions STEP 34: select the

_ activate Vertex _ select & move verticies to verify that the

de-activate Vertex 33 35 Mesh Smooth STEP 35: select the

Smooth _ set the Subdivision Method: = Classic STEP 36: scroll

1 Class Assignment 08: Create one 800 w x 600 h pixel jpeg that

9 Shell STEP 33: (note: everything that we have modeled thus far is a surface with no thickness) _ (let s give a thickness to the Structure) _ command panel / modifier list _ select Shell _ (note: the shell modifier extrudes in two directions) _ set the extrusion amount = 3 in both directions STEP 34: select the object named Base Curves _ click on the + to expand Edit Spline _ activate Vertex _ select & move verticies to verify that the Base Curve object drives the Surface, Structure & Columns _ de-activate Vertex Mesh Smooth STEP 35: select the Structure object _ command panel / modifier list _ select Mesh Smooth _ set the Subdivision Method: = Classic STEP 36: scroll down _ under Parameters reduce the Strength: =.1 Class Assignment 08: Create one 800 w x 600 h pixel jpeg that has: a plan, elevation & 3D view labels & descriptions Arch 427 Your Name Class Assignment

Extrude. Taper. STEP 04: Ctrl +V _ select Copy from the clone window _ name the copy: Slabs Mesh _ click OK

Extrude. Taper. STEP 04: Ctrl +V _ select Copy from the clone window _ name the copy: Slabs Mesh _ click OK Extrude STEP 01: open the class-08 3ds Max file _ select the ellipse _ command panel / modifier list _ select Extrude _ set the extrusion Amount: 400 _ STEP 02: with the perspective viewport current press