Chapter 1: Foundations for Geometry/Review Assignment Sheet

1-1 Understanding Points, Lines, and Planes (pp. 6 11) Vocabulary EXERCISES

Vocabulary acute angle.................. 1 adjacent angles.............. 8 angle....................... 0 angle bisector............... 3 area........................ 36 base........................ 36

B. Section 1.1. Chapter 1 Review Booklet A. Vocabulary Match the vocabulary term with its definition. 3. A pair of opposite rays on line p.

A. Vocabulary Match the vocabulary term with its definition. Point Polygon Angle Sides Postulate Collinear Opposite Rays Vertical angles Coplanar Linear Pair Complementary Vertex Line Adjacent Plane Distance

Objectives: (What You ll Learn) Identify and model points, lines, planes Identify collinear and coplanar points, intersecting lines and planes

Geometry Chapter 1 Outline: Points, Lines, Planes, & Angles A. 1-1 Points, Lines, and Planes (What You ll Learn) Identify and model points, lines, planes Identify collinear and coplanar points, intersecting

Writing Linear Equations

Writing Linear Equations Name: SHOW ALL WORK!!!!! For full credit, show all work on all problems! Write the slope-intercept form of the equation of each line. 1. 3x 2y = 16 2. 13x 11y = 12 3. 4x y = 1

Chapter 1-2 Points, Lines, and Planes

Chapter 1-2 Points, Lines, and Planes Undefined Terms: A point has no size but is often represented by a dot and usually named by a capital letter.. A A line extends in two directions without ending. Lines

Reteach. Understanding Points, Lines, and Planes. P point P

Name Date Class 1-1 Understanding Points, Lines, and Planes A point has no size. It is named using a capital letter. All the figures below contain points. line Figure Characteristics Diagram Words and

Writing Linear Equations

Complete ALL problems. Show your work. Check your answers on the back page! Writing Linear Equations Write the slope-intercept form of the equation of each line. 1. 3x 2y = 16 2. 4x y = 1 3. 6x + 5y =

Unit 3. Chapter 1. Foundations of Geometry. Name. Hour

Unit 3 Chapter 1 Foundations of Geometry Name Hour 1 Geometry Unit 3 Foundations of Geometry Chapter 1 Monday October 1 Tuesday October 2 1.1 Understanding Points, Lines, & Planes 1.2 Linear Measure DHQ

Use the figure to name each of the following:

Name: Period Date Pre-AP Geometry Fall 2016 Semester Exam REVIEW *Chapter 1.1 Points Lines Planes Use the figure to name each of the following: 1) three non-collinear points 2) one line in three different

Test Review: Geometry I TEST DATE: ALL CLASSES TUESDAY OCTOBER 6

Test Review: Geometry I TEST DATE: ALL CLASSES TUESDAY OCTOBER 6 Notes to Study: Notes A1, B1, C1, D1, E1, F1, G1 Homework to Study: Assn. 1, 2, 3, 4, 5, 6, 7 Things it would be a good idea to know: 1)

NAME DATE PER. GEOMETRY FALL SEMESTER REVIEW FIRST SIX WEEKS PART 1. A REVIEW OF ALGEBRA Find the correct answer for each of the following.

NAME ATE PER. GEOMETRY FALL SEMESTER REVIEW FIRST SIX WEEKS PART 1. A REVIEW OF ALGEBRA Find the correct answer for each of the following. 1. m = Solve for m : m 7 = -13 + m FIRST SIX-WEEKS REVIEW 2. x

*Chapter 1.1 Points Lines Planes. Use the figure to name each of the following:

Name: Period Date Pre- AP Geometry Fall 2015 Semester Exam REVIEW *Chapter 1.1 Points Lines Planes Use the figure to name each of the following: 1) three non-collinear points 2) one line in three different

There are two ways to name a line. What are the two ways?

Geometry: 1-1 Points, Lines and Planes What are the Undefined Terms? The Undefined Terms are: What is a Point? How is a point named? Example: What is a Line? A line is named two ways. What are the two

Term: description named by notation (symbols) sketch an example. The intersection of two lines is a. Any determine a line.

Term: description named by notation (symbols) sketch an example point line plane Collinear points Examples: Non-collinear points Examples: Coplanar: Examples: Non-coplanar: Examples: The intersection of

15. K is the midpoint of segment JL, JL = 4x - 2, and JK = 7. Find x, the length of KL, and JL. 8. two lines that do not intersect

Name: Period Date Pre-AP Geometry Fall Semester Exam REVIEW *Chapter 1.1 Points Lines Planes Use the figure to name each of the following: 1. three non-collinear points 2. one line in three different ways

Geometry Chapter 1 TEST * Required

Geometry Chapter 1 TEST * Required Vocabulary Match each word with the correct definition or description. 1. Plane * A flat surface extending indefinitely The two rays that from an angle Exactly one of

Geometry ~ Chapter 1 Capacity Matrix

Geometry ~ Chapter 1 Capacity Matrix Learning Targets 1. Drawing and labeling the Geometry Vocabulary 2. Using the distance and midpoint formula 3. Classifying triangles and polygons Section Required Assignments

Geometry Notes Chapter 4: Triangles

Geometry Notes Chapter 4: Triangles Name Date Assignment Questions I have Day 1 Section 4.1: Triangle Sum, Exterior Angles, and Classifying Triangles Day 2 Assign: Finish Ch. 3 Review Sheet, WS 4.1 Section

Geometry - Chapter 1 - Corrective #1

Class: Date: Geometry - Chapter 1 - Corrective #1 Short Answer 1. Sketch a figure that shows two coplanar lines that do not intersect, but one of the lines is the intersection of two planes. 2. Name two

Geometry Reasons for Proofs Chapter 1

Geometry Reasons for Proofs Chapter 1 Lesson 1.1 Defined Terms: Undefined Terms: Point: Line: Plane: Space: Postulate 1: Postulate : terms that are explained using undefined and/or other defined terms

10) the plane in two different ways Plane M or DCA (3 non-collinear points) Use the figure to name each of the following:

Name: Period Date Pre-AP Geometry Fall 2015 Semester Exam REVIEW *Chapter 1.1 Points Lines Planes Use the figure to name each of the following: 1) three non-collinear points (A, C, B) or (A, C, D) or any

Geometry Cheat Sheet

Geometry Cheat Sheet Chapter 1 Postulate 1-6 Segment Addition Postulate - If three points A, B, and C are collinear and B is between A and C, then AB + BC = AC. Postulate 1-7 Angle Addition Postulate -

a triangle with all acute angles acute triangle angles that share a common side and vertex adjacent angles alternate exterior angles

acute triangle a triangle with all acute angles adjacent angles angles that share a common side and vertex alternate exterior angles two non-adjacent exterior angles on opposite sides of the transversal;

Unit 2 Language Of Geometry

Unit 2 Language Of Geometry Unit 2 Review Part 1 Name: Date: Hour: Lesson 1.2 1. Name the intersection of planes FGED and BCDE 2. Name another point on plane GFB 3. Shade plane GFB 4. Name the intersection

Geometry Midterm Review Vocabulary:

Name Date Period Geometry Midterm Review 2016-2017 Vocabulary: 1. Points that lie on the same line. 1. 2. Having the same size, same shape 2. 3. These are non-adjacent angles formed by intersecting lines.

Geometry Lesson 1-1: Identify Points, Lines, and Planes Name Hr Pg. 5 (1, 3-22, 25, 26)

Geometry Lesson 1-1: Identify Points, Lines, and Planes Name Hr Pg. 5 (1, 3-22, 25, 26) Learning Target: At the end of today s lesson we will be able to successfully name and sketch geometric figures.

PLANE GEOMETRY SKILL BUILDER ELEVEN

PLANE GEOMETRY SKILL BUILDER ELEVEN Lines, Segments, and Rays The following examples should help you distinguish between lines, segments, and rays. The three undefined terms in geometry are point, line,

Geometry Semester 1 Final Exam Study Guide FCS, Mr. Garcia

Name Date Period This is your semester 1 exam review study guide. It is designed for you to do a portion each day until the day of the exam. You may use the following formula to calculate your semester

Name Date Period. 1.1 Understanding the Undefined Terms

Name Date Period Lesson Objective: 1.1 Understanding the Undefined Terms Naming Points, Lines, and Planes Point Line Plane Collinear: Coplanar: 1. Give 2 other names for PQ and plane R. 2. Name 3 points

VOCABULARY. Chapters 1, 2, 3, 4, 5, 9, and 8. WORD IMAGE DEFINITION An angle with measure between 0 and A triangle with three acute angles.

Acute VOCABULARY Chapters 1, 2, 3, 4, 5, 9, and 8 WORD IMAGE DEFINITION Acute angle An angle with measure between 0 and 90 56 60 70 50 A with three acute. Adjacent Alternate interior Altitude of a Angle

Geometry: Semester 1 Midterm

Class: Date: Geometry: Semester 1 Midterm Multiple Choice Identify the choice that best completes the statement or answers the question. 1. The first two steps for constructing MNO that is congruent to

Mr. Northcutt's Math Classes Class Presentation

Mr. Northcutt's Math Classes Class Presentation Monday, September 22, 2008 (14) 1 Math 1 Math 2 Applied Math Math 1 Daily Summary Announcements None Class Objectives Quiz Review Multiplication & Division

Vocabulary Point- Line- Plane- Ray- Line segment- Congruent-

* Geometry Overview Vocabulary Point- an exact location. It is usually represented as a dot, but it has no size at all. Line- a straight path that extends without end in opposite directions. Plane- a flat

1. A statement is a set of words and/or symbols that collectively make a claim that can be classified as true or false.

Chapter 1 Line and Angle Relationships 1.1 Sets, Statements and Reasoning Definitions 1. A statement is a set of words and/or symbols that collectively make a claim that can be classified as true or false.

a ray that divides and angle into two congruent angles triangle a closed polygon with 3 angles whose sum is 180

Geometry/PP Geometry End of Semester Review 2011 Unit 1: Shapes and Patterns asic oncepts Good definitions Inductive reasoning Symbols and terms detailed and use precise words, such as supplementary or

Postulate 1-1-2: Through any three noncollinear points there is exactly one plane containing them.

Unit Definitions Term Labeling Picture Undefined terms Point Dot, place in space Line Plane Series of points that extends in two directions forever Infinite surface with no thickness Defined Terms Collinear

GEOMETRY R Unit 2: Angles and Parallel Lines

GEOMETRY R Unit 2: Angles and Parallel Lines Day Classwork Homework Friday 9/15 Unit 1 Test Monday 9/18 Tuesday 9/19 Angle Relationships HW 2.1 Angle Relationships with Transversals HW 2.2 Wednesday 9/20

How to Construct a Perpendicular to a Line (Cont.)

Geometric Constructions How to Construct a Perpendicular to a Line (Cont.) Construct a perpendicular line to each side of this triangle. Find the intersection of the three perpendicular lines. This point

8r + 5 3r 4. HW: Algebra Skills. Name: Date: Period:

HW: Algebra Skills Name: Date: Period: SHOW YOUR WORK!! Use this homework to recall your algebra skills. Additional help can be found in the textbook starting on page 753. You will be quizzed over algebra

Unit 1: Foundations of Geometry Section 1: Points, Lines & Planes. The most basic figures in geometry are.

Unit 1: Foundations of Geometry Section 1: Points, Lines & Planes The most basic figures in geometry are. 1 Intersections: Lines Planes Ex #1 2 1a. Name four coplanar points. 1b. Name three lines. 2.Use

Chapter 1. Essentials of Geometry

Chapter 1 Essentials of Geometry 1.1 Identify Points, Lines, and Planes Objective: Name and sketch geometric figures so you can use geometry terms in the real world. Essential Question: How do you name

Geometry Midterm Review 2019

Geometry Midterm Review 2019 Name To prepare for the midterm: Look over past work, including HW, Quizzes, tests, etc Do this packet Unit 0 Pre Requisite Skills I Can: Solve equations including equations

Maintaining Mathematical Proficiency

Name Date Chapter 1 Maintaining Mathematical Proficiency Simplify the expression. 1. 3 + ( 1) = 2. 10 11 = 3. 6 + 8 = 4. 9 ( 1) = 5. 12 ( 8) = 6. 15 7 = + = 8. 5 ( 15) 7. 12 3 + = 9. 1 12 = Find the area

(1) Page #1 24 all. (2) Page #7-21 odd, all. (3) Page #8 20 Even, Page 35 # (4) Page #1 8 all #13 23 odd

Geometry/Trigonometry Unit 1: Parallel Lines Notes Name: Date: Period: # (1) Page 25-26 #1 24 all (2) Page 33-34 #7-21 odd, 23 28 all (3) Page 33-34 #8 20 Even, Page 35 #40 44 (4) Page 60 61 #1 8 all #13

GH Chapter 3 Quiz Review (3.1, 3.2, 3.4, 3.5)

Name: Class: Date: SHOW ALL WORK GH Chapter 3 Quiz Review (3.1, 3.2, 3.4, 3.5) Match each vocabulary term with its definition. (#1-5) a. parallel lines b. parallel planes c. perpendicular lines d. skew

Definitions. You can represent a point by a dot and name it by a capital letter.

Definitions Name Block Term Definition Notes Sketch Notation Point A location in space that is represented by a dot and has no dimension You can represent a point by a dot and name it by a capital letter.

Introduction to Geometry

Introduction to Geometry Building Blocks of Geometry I. Three building blocks of geometry: points, lines, and planes. 1. A point is the most basic building block of geometry. It has no size. It only has

Warm-Up. Find the domain and range:

Warm-Up Find the domain and range: Geometry Vocabulary & Notation Point Name: Use only the capital letter, without any symbol. Line Name: Use any two points on the line with a line symbol above. AB Line

Summer Review for incoming Geometry students (all levels)

Name: 2017-2018 Mathematics Teacher: Summer Review for incoming Geometry students (all levels) Please complete this review packet for the FIRST DAY OF CLASS. The problems included in this packet will provide

Review Test 1 Chapters 1 & 2 and Appendix L

ath 61 pring 2007 Review Test 1 hapters 1 & 2 and Appendix L 1 www.timetodare.com To prepare for the test, learn all definitions, be familiar with all theorems and postulates and study the following problems.

1.1 Understanding the Undefined Terms

1.1 Understanding the Undefined Terms Undefined Terms There are three undefined terms in geometry, these words do not have a formal definition. The undefined terms are:,, and. Naming Points, Lines, and

You MUST know the big 3 formulas!

Name 3-13 Review Geometry Period Date Unit 3 Lines and angles Review 3-1 Writing equations of lines. Determining slope and y intercept given an equation y = mx + b Writing the equation of a line given

Geometry Midterm Review Mr. Pisciotta

Geometry Midterm Review 2016-2017 Mr. Pisciotta Chapter 1: Essentials of Geometry Sections 1.1 1.5 1.1 Points, Lines and Planes 1.2 Use segments and Congruence 1.3 Midpoint and Distance Formulas -Be able

GEOMETRY POSTULATES AND THEOREMS. Postulate 1: Through any two points, there is exactly one line.

GEOMETRY POSTULATES AND THEOREMS Postulate 1: Through any two points, there is exactly one line. Postulate 2: The measure of any line segment is a unique positive number. The measure (or length) of AB

Downloaded from

Lines and Angles 1.If two supplementary angles are in the ratio 2:7, then the angles are (A) 40, 140 (B) 85, 95 (C) 40, 50 (D) 60, 120. 2.Supplementary angle of 103.5 is (A) 70.5 (B) 76.5 (C) 70 (D)

An Approach to Geometry (stolen in part from Moise and Downs: Geometry)

An Approach to Geometry (stolen in part from Moise and Downs: Geometry) Undefined terms: point, line, plane The rules, axioms, theorems, etc. of elementary algebra are assumed as prior knowledge, and apply

Chapter 1: Essentials of Geometry

1.1 Identify Points, Lines, and Planes Chapter 1: Essentials of Geometry Point: Line: Collinear points: Coplanar points: Segment: Ray: Opposite rays: Example 1: Use the diagram at the right to answer the

SHELBY COUNTY SCHOOLS: GEOMETRY 1ST NINE WEEKS OCTOBER 2015

SHELBY COUNTY SCHOOLS: GEOMETRY 1ST NINE WEEKS OCTOBER 2015 Created to be taken with the ACT Quality Core Reference Sheet: Geometry. 1 P a g e 1. Which of the following is another way to name 1? A. A B.

Point A location in geometry. A point has no dimensions without any length, width, or depth. This is represented by a dot and is usually labelled.

Test Date: November 3, 2016 Format: Scored out of 100 points. 8 Multiple Choice (40) / 8 Short Response (60) Topics: Points, Angles, Linear Objects, and Planes Recognizing the steps and procedures for

8. T(3, 4) and W(2, 7) 9. C(5, 10) and D(6, -1)

Name: Period: Chapter 1: Essentials of Geometry In exercises 6-7, find the midpoint between the two points. 6. T(3, 9) and W(15, 5) 7. C(1, 4) and D(3, 2) In exercises 8-9, find the distance between the

Geometry/Trigonometry Summer Assignment

Student Name: 2017 Geometry/Trigonometry Summer Assignment Complete the following assignment in the attached packet. This is due the first day of school. Bring in a copy of your answers including ALL WORK

BENCHMARK Name Points, Lines, Segments, and Rays. Name Date. A. Line Segments BENCHMARK 1

A. Line Segments (pp. 1 5) In geometry, the words point, line and plane are undefined terms. They do not have formal definitions but there is agreement about what they mean. Terms that can be described

Section 1.1 Notes. Points - have no size or dimension and named using capital letters A

Section 1.1 Notes Building Blocks of Geometry Undefined Terms: Points - have no size or dimension and named using capital letters A Lines - have no thickness (1D) and extend forever. Named using 2 points

1.1 Points, Lines, and Planes ASSIGNMENT Hour Date

1.1 Points, Lines, and Planes ASSIGNMENT Hour Date Refer to the figure at the right. 1. Name a line that contains point A. 2. What is another name for line m? 3. Name a point not on AC. 4. Name the intersection

Parallel Lines: Two lines in the same plane are parallel if they do not intersect or are the same.

Section 2.3: Lines and Angles Plane: infinitely large flat surface Line: extends infinitely in two directions Collinear Points: points that lie on the same line. Parallel Lines: Two lines in the same plane

Geometry 1-1. Non-collinear Points not on the same line. Need at least 3 points to be non-collinear since two points are always collinear

Name Geometry 1-1 Undefined terms terms which cannot be defined only described. Point, line, plane Point a location in space Line a series of points that extends indefinitely in opposite directions. It

Term Definition Figure

Geometry Unit 1 Packet - Language of Geometry Name: #: Video Notes LT 1.1 - Distinguish and apply basic terms of geometry (coplanar, collinear, bisectors, congruent, parallel, perpendicular, etc.) Term

Postulates, Theorems, and Corollaries. Chapter 1

Chapter 1 Post. 1-1-1 Through any two points there is exactly one line. Post. 1-1-2 Through any three noncollinear points there is exactly one plane containing them. Post. 1-1-3 If two points lie in a

Geometry Review for Semester 1 Final Exam

Name Class Test Date POINTS, LINES & PLANES: Geometry Review for Semester 1 Final Exam Use the diagram at the right for Exercises 1 3. Note that in this diagram ST plane at T. The point S is not contained

Tools of Geometry 1. X + 9 = 24 2. 25 X = 15 3. X + 3 = -2X -10 4. 3X + 4Y = 2 Place in slope intercept form. 5. Y = ½ X 2 What is the slope? What is the Y- Intercept? Inductive Reasoning is reasoning

Geometry Review. IM3 Ms. Peralta

Geometry Review IM3 Ms. Peralta Ray: is a part of a line that consists of an endpoint, and all points on one side of the endpoint. P A PA Opposite Rays: are two rays of the same line with a common endpoint

Type of Triangle Definition Drawing. Name the triangles below, and list the # of congruent sides and angles:

Name: Triangles Test Type of Triangle Definition Drawing Right Obtuse Acute Scalene Isosceles Equilateral Number of congruent angles = Congruent sides are of the congruent angles Name the triangles below,

SUMMER MATH PREP WORK FOR STUDENTS ENTERING GEOMETRY

SUMMER MATH PREP WORK FOR STUDENTS ENTERING GEOMETRY NAME: SUMMER PREP WORK HELP 8/2, 8/9, AND 8/16 2:45PM 3:45PM BOLGER MEDIA CENTER Mr. Rosenberg will be there on 8/2 Mrs. Keelen will be there on 8/9

Geometry-Chapter 2 Notes

2.1 Perpendicularity Geometry-Chapter 2 Notes Vocabulary: perpendicular symbol parallel symbol Definition #16 Lines, rays or segments that intersect at right angles are perpendicular. Examples and label

Theorems, Postulates, and Properties for Use in Proofs

CP1 Math 2 Name Unit 1: Deductive Geometry: Day 21-22 Unit 1 Test Review Students should be able to: Understand and use geometric vocabulary and geometric symbols (,,, etc) Write proofs using accurate

Geometry CP Constructions Part I Page 1 of 4. Steps for copying a segment (TB 16): Copying a segment consists of making segments.

Geometry CP Constructions Part I Page 1 of 4 Steps for copying a segment (TB 16): Copying a segment consists of making segments. Geometry CP Constructions Part I Page 2 of 4 Steps for bisecting a segment

Analytic Geometry. Pick up the weekly agenda sheet and the packet for the week. Find your vocabulary match. This is your new team member.

Happy New Year! Analytic Geometry Pick up the weekly agenda sheet and the packet for the week. Find your vocabulary match. This is your new team member. Unit 1: Similarity, Congruence & Proofs Vocabulary

Let s Get This Started!

Lesson. Skills Practice Name Date Let s Get This Started! Points, Lines, Planes, Rays, and Line Segments Vocabulary Write the term that best completes each statement.. A geometric figure created without

Answer Key. 1.1 The Three Dimensions. Chapter 1 Basics of Geometry. CK-12 Geometry Honors Concepts 1. Answers

1.1 The Three Dimensions 1. Possible answer: You need only one number to describe the location of a point on a line. You need two numbers to describe the location of a point on a plane. 2. vary. Possible

1-1. Points, Lines, and Planes. Lesson 1-1. What You ll Learn. Active Vocabulary

1-1 Points, Lines, and Planes What You ll Learn Scan the text in Lesson 1-1. Write two facts you learned about points, lines, and planes as you scanned the text. 1. Active Vocabulary 2. New Vocabulary

UNIT 1: TOOLS OF GEOMETRY POINTS,LINES, & PLANES Geometry is a mathematical system built on accepted facts, basic terms, and definitions.

UNIT 1: TOOLS OF GEOMETRY POINTS,LINES, & PLANES Geometry is a mathematical system built on accepted facts, basic terms, and definitions. Point, line, and plane are all undefined terms. They are the basic

Geometry (H) Worksheet: 1st Semester Review:True/False, Always/Sometimes/Never

1stSemesterReviewTrueFalse.nb 1 Geometry (H) Worksheet: 1st Semester Review:True/False, Always/Sometimes/Never Classify each statement as TRUE or FALSE. 1. Three given points are always coplanar. 2. A

GEOMETRY is the study of points in space

CHAPTER 5 Logic and Geometry SECTION 5-1 Elements of Geometry GEOMETRY is the study of points in space POINT indicates a specific location and is represented by a dot and a letter R S T LINE is a set of

Geometry Vocabulary Math Fundamentals Reference Sheet Page 1

Math Fundamentals Reference Sheet Page 1 Acute Angle An angle whose measure is between 0 and 90 Acute Triangle A that has all acute Adjacent Alternate Interior Angle Two coplanar with a common vertex and

FALL SEMESTER EXAM Directions: You must show work for all the problems. Unit 1. Angle. Angle Addition Postulate. Angle Bisector. Length of a segment

Name FALL SEMESTER EXAM Directions: You must show work for all the problems. Unit 1 Period Angle Angle Addition Postulate Angle Bisector Length of a segment Line Midpoint Right Angle Segment Segment Addition

Unit 3 Notes: Parallel Lines, Perpendicular Lines, and Angles 3-1 Transversal

Unit 3 Notes: Parallel Lines, Perpendicular Lines, and Angles 3-1 Transversal REVIEW: *Postulates are Fundamentals of Geometry (Basic Rules) To mark line segments as congruent draw the same amount of tic

Mathematics For Class IX Lines and Angles

Mathematics For Class IX Lines and Angles (Q.1) In Fig, lines PQ and RS intersect each other at point O. If, find angle POR and angle ROQ (1 Marks) (Q.2) An exterior angle of a triangle is 110 and one

Get Ready. Solving Equations 1. Solve each equation. a) 4x + 3 = 11 b) 8y 5 = 6y + 7

Get Ready BLM... Solving Equations. Solve each equation. a) 4x + = 8y 5 = 6y + 7 c) z+ = z+ 5 d) d = 5 5 4. Write each equation in the form y = mx + b. a) x y + = 0 5x + y 7 = 0 c) x + 6y 8 = 0 d) 5 0

Term Definition Figure

Notes LT 1.1 - Distinguish and apply basic terms of geometry (coplanar, collinear, bisectors, congruency, parallel, perpendicular, etc.) Term Definition Figure collinear on the same line (note: you do

POTENTIAL REASONS: Definition of Congruence:

Sec 1.6 CC Geometry Triangle Proofs Name: POTENTIAL REASONS: Definition of Congruence: Having the exact same size and shape and there by having the exact same measures. Definition of Midpoint: The point

Date Name of Lesson Assignments & Due Dates

Date Name of Lesson Assignments & Due Dates Basic Terms Points, Lines and Planes Constructions (Copy Angle and Segment) Distance Formula Activity for Distance Formula Midpoint Formula Quiz Angle Measure

UNIT 6: Connecting Algebra & Geometry through Coordinates

TASK: Vocabulary UNIT 6: Connecting Algebra & Geometry through Coordinates Learning Target: I can identify, define and sketch all the vocabulary for UNIT 6. Materials Needed: 4 pieces of white computer

Geometry Semester 1 Final Review Part 1 (Units 1 3)

Name: Date: Block: Geometry Semester 1 Final Review Part 1 (Units 1 3) Unit 1 (Holt Sections 1-1 1-5) 1. Draw and label each of the following. a) a line containing points R and S. b) a ray with endpoint

Pre-AP Geometry Chapter 1 TEST Review Important Vocabulary

1 Pre-AP Geometry Chapter 1 TEST Review Important Vocabulary Space Undefined Line segment Congruent segments Geometry Euclid Conditional Converse Postulate Theorem Converse Hypothesis Conclusion Venn Congruent

1.1 Points, Lines, and Planes

1.1 Points, Lines, and Planes Identify and model points, lines and planes. Identify collinear, and coplanar points and intersecting lines and planes in the space. Vocabulary Point, line, plane, collinear,

Section 1-1 Points, Lines, and Planes

Section 1-1 Points, Lines, and Planes I CAN. Identify and model points, lines, and planes. Identify collinear and coplanar points and intersecting lines and planes in space. Undefined Term- Words, usually

Chapter 1 Tools of Geometry

Chapter 1 Tools of Geometry Goals: 1) learn to draw conclusions based on patterns 2) learn the building blocks for the structure of geometry 3) learn to measure line segments and angles 4) understand the

Geometry Quarter 1 Test - Study Guide.

Name: Geometry Quarter 1 Test - Study Guide. 1. Find the distance between the points ( 3, 3) and ( 15, 8). 2. Point S is between points R and T. P is the midpoint of. RT = 20 and PS = 4. Draw a sketch

Geometry Third Quarter Study Guide

Geometry Third Quarter Study Guide 1. Write the if-then form, the converse, the inverse and the contrapositive for the given statement: All right angles are congruent. 2. Find the measures of angles A,

Chapter 4 - Lines in a Plane. Procedures for Detour Proofs

Chapter 4 - Lines in a Plane 4.1 Detours and Midpoints Detour proofs - To solve some problems, it is necessary to prove pair of triangles congruent. These we call detour proofs because we have to prove