Drilling Performance Services

Size: px
Start display at page:

Download "Drilling Performance Services"

Transcription

1 Drilling Performance Services Helping Our Customers Achieve Superior Results

2 REVit DAMPED Oscillation REVit PROVEN REAL-TIME STICK SLIP MITIGATION *Torque and RPM are out of phase and cancel one another Advanced top drive automation provides real-time stick slip mitigation Surface-based system: proven, reliable, simple, safe Requires minimal input from the driller Benefits REVit mitigates torsional oscillation in the drill string and prevents excessive BHA and bit acceleration. Time savings are realized by increasing ROP, extending bit life, and minimizing nonproductive time incurred as a results of downhole motor and tool failures. REVit expands the efficient drilling envelop enabling more aggressive drilling previously out of reach due to stick slip constraints. To ensure optimal performance, the REVit service includes monitoring, training and reporting through RIGLINE 24/7. Canrig s team of certified REVit analysts provides parameters to tune the system, ensures that it is being used properly and sends reports with detailed metrics and usage scores to the well construction team. Case Study Where: Granite Wash What: Operator was experiencing severe stick slip in the 12 ¼ and 8 ¾ sections. This lead to multiple bit runs per section and a lot of NPT. REVit was installed to mitigate stick slip and minimize the amount of bit runs. Results: REVit successfully mitigated stick slip and the operator saved an average of two bits and 5.5 days per well.

3 Drilling Performance Services Canrig has developed a proprietary line of innovative drilling software that enhances drilling performance. These services combine to save drilling time by optimizing on-bottom performance, improving directional drilling with a mud motor and preventing damaging torsional vibration. ROCKit ROCKit is a patented directional steering control system that oscillates drill pipe to reduce friction and increase rate of penetration. REVit REVit is a proven real-time stick slip mitigation system that extends bit life, reduces tool failures and increases penetration rate resulting in significant savings in drilling time and cost. DrillSmart DrillSmart is Canrig s best-in-class automatic driller based on proprietary technology that allows the system to adapt to operating parameters and drilling conditions while optimizing performance.

4 ROCKit Suite SIGNIFICANTLY INCREASES ROP ROCKit Base System Directional Steering Control Patented technology that oscillates drill pipe to reduce drag and increase ROP Precise angle offset control simplifies toolface orientation Available as software upgrade on all Canrig AC top drives Add-on technology for AC top drives from other vendors ROCKit HUD Integrated MWD Heads Up Display Integrated MWD toolface and survey data helps driller slide more effectively Provides unambiguous, real-time toolface advisory System scores the driller s ability to maintain the toolface and slide effectively Torque and delta pressure displayed on screen provide leading indicators of toolface steering problems ROCKit Pilot Automated Directional Steering Control Extends ROCKit HUD functionality to include automated slide control Automatic toolface steering through top drive quill position control Allows tuning of frequency and aggressiveness of steering interventions Driller can combine manual control with ROCKit Pilot automated steering DAYS DIRECTIONAL DRILLING TIME WITHOUT ROCKit WITH ROCKit A B C D E F LATERAL CURVE Benefits The ROCKit Suite significantly increases ROP by rocking pipe and delivering ideal weight to bit. It promotes improved toolface control by allowing fine adjustments while still drilling ahead, reducing the need for lubricants and other friction reducing additives. Drillers save time by quickly setting toolface orientation. Data from case study in Barnett Shale show typical result using ROCKit ROCKit XT Our patented oscillation system is now available on top drives from other vendors. ROCKit XT connects to your existing top drive controls or console. For a list of supported top drives, contact Canrig at info@canrig.com or call

5 DrillSmart BEST-IN-CLASS Automatic DRILLER Based on patented technology Utilizes proprietary equations and advanced algorithms Mimics intuitive decision making by experienced human drillers CONTROL PARAMETERS Rate of penetration Weight-on-bit Differential pressure Torque Benefits Drillers who have used DrillSmart typically experience increased rate of penetration. The system s real-time technology makes it possible to hold drilling parameters within strict tolerance bands, as well as providing for smooth control to reduce wear and tear on drilling equipment. Self-optimizing algorithms allow DrillSmart to adapt to the drilling dynamics of the rig as well as changes in geology. A combination of physical controls and intuitive touchbased user interface makes the use of DrillSmart completely transparent to the driller who is ready to be productive as soon as the system is installed. ROP Cruise Control Where: South Texas What: For two days an expert driller competed against ROP Cruise Control in a series of on and off tests. Results: ROP Cruise Control was able to drill 16% faster.

6 General Information Sales Information Rigline 24/7 (866) Telephone +1 (281) Fax +1 (281) Postal Address Corporate Headquarters 8223 Willow Place Drive South Houston, TX USA 1504

Helping Our Customers Achieve Superior Results. Power & Control Systems

Helping Our Customers Achieve Superior Results. Power & Control Systems Helping Our Customers Achieve Superior Results Power & Control Systems Your one stop for power, control and drilling rig equipment Canrig s capabilities and experience as the original manufacturer of sophisticated

More information

Well Advisor Project. Ken Gibson, Drilling Technology Manager

Well Advisor Project. Ken Gibson, Drilling Technology Manager Well Advisor Project Ken Gibson, Drilling Technology Manager BP Well Advisor Project Build capability to integrate real-time data with predictive tools, processes and expertise to enable the most informed

More information

USER MANUAL Doc.No: WI4200 Rev.No: h on-cal support:

USER MANUAL Doc.No: WI4200 Rev.No: h on-cal support: USER MANUAL Doc.No: WI4200 Rev.No: 6.00 24h on-call support: +47 51951170 AST FUNCTION The Anti Stick-slip Tool (AST) stabilizes drilling torque originating from the bit through a direct mechanical process

More information

Drilling & Completions with Real-Time Operational Intelligence

Drilling & Completions with Real-Time Operational Intelligence Drilling & Completions with Real-Time Operational Intelligence Presented by Ken Startz Marathon Oil Company Agenda Our Continuing Journey with the PI System Brief Update on MaraDrill tm Using PI Server

More information

1. Control drilling dynamics by eliminating damaging torsional oscillations (stick slip) generated from the bit and/or an underreamer

1. Control drilling dynamics by eliminating damaging torsional oscillations (stick slip) generated from the bit and/or an underreamer AST Overview The Tomax Anti Stick Slip (AST) tool is a downhole mechanical device for drilling optimisation. The technology has been commercial since 2007 and to date has a track record of over 1000 runs

More information

ElectroProject Soft Torque. - EPST - Advanced Soft torque - Auto Tune - Z-Torque. Operation manual 3.3.2

ElectroProject Soft Torque. - EPST - Advanced Soft torque - Auto Tune - Z-Torque. Operation manual 3.3.2 Member of the ENGIE group Electroproject Computerweg 21, 1033 RH Amsterdam PO-box 34, 1000 AA Amsterdam The Netherlands Telephone +31 88 484 92 50 E-mail softtorque@electroproject.nl Website www.electroproject.nl

More information

PETROPHYSICAL DATA AND OPEN HOLE LOGGING BASICS COPYRIGHT. MWD and LWD Acquisition (Measurement and Logging While Drilling)

PETROPHYSICAL DATA AND OPEN HOLE LOGGING BASICS COPYRIGHT. MWD and LWD Acquisition (Measurement and Logging While Drilling) LEARNING OBJECTIVES PETROPHYSICAL DATA AND OPEN HOLE LOGGING BASICS MWD and LWD Acquisition By the end of this lesson, you will be able to: Understand the concept of Measurements While Drilling (MWD) and

More information

ENERGY EQUIPMENT SERVICES

ENERGY EQUIPMENT SERVICES ENERGY EQUIPMENT SERVICES FOCUSED ON REDEEMING OUR CUSTOMERS TIME MASTER RIG INT L. www.masterrig.com 100,000 squarefoot API/ISO registered facilities built on 15 acres. MASTER RIG INTERNATIONAL We proudly

More information

PRESENTATION TITLE. Uncertainty - an introductory discussion Robert Wylie. Industry Steering Committee on Wellbore Survey Accuracy

PRESENTATION TITLE. Uncertainty - an introductory discussion Robert Wylie. Industry Steering Committee on Wellbore Survey Accuracy 1 PRESENTATION TITLE Tool Wellbore Face Positioning Efficiency, Technical Virtual SectionSurveys, and Positional Uncertainty - an introductory discussion Speaker Information President xndrilling, Inc.

More information

The New Generation of Rotary Systems May be Closer Than You Think Frank J. Schuh, Pat Herbert, John Harrell, The Validus International Company, LLC

The New Generation of Rotary Systems May be Closer Than You Think Frank J. Schuh, Pat Herbert, John Harrell, The Validus International Company, LLC 1 AADE-03-NTCE-02 The New Generation of Rotary Systems May be Closer Than You Think Frank J. Schuh, Pat Herbert, John Harrell, The Validus International Company, LLC Copyright 2003 AADE Technical Conference

More information

LODESTARINT.COM. MINImal Series

LODESTARINT.COM. MINImal Series MINImal Series Overview The Lodestar MINImal series is the industry s most technological advanced MWD system; capitalizing on innovations such as in MEMs accelerometers and ARM magnetometers to deliver

More information

I-Wheel Conveyance Technology Ultra-Flexible, Ultra-Reliable

I-Wheel Conveyance Technology Ultra-Flexible, Ultra-Reliable See how we can help you Please contact us to discuss your specific requirements: Technical Centers Fort Worth Technical Center, TX, USA 1132 Everman Parkway, #100 Forth Worth, TX 76140 T +1 817 568 8528

More information

SMARTDRILL 21. Intelligent Automatic Drilling & Block Safety System. Website:

SMARTDRILL 21. Intelligent Automatic Drilling & Block Safety System. Website: SMARTDRILL 21 Intelligent Automatic Drilling & Block Safety System RIGSERV INTL. LLC 11381 MEADOWGLEN SUITE F, HOUSTON, TEXAS 77082, U.S.A. TEL: 1 281 870 0833 FAX: 1 281 870 0480 Website: www.rigserv.com

More information

Expensive to drill wells when all goes to plan. Drilling problems add costs throughout the well s life.

Expensive to drill wells when all goes to plan. Drilling problems add costs throughout the well s life. Beau Rollins Map View Cross Section View Expensive to drill wells when all goes to plan. Surface Location Drilling problems add costs throughout the well s life. The best scenario for minimizing costs

More information

Directional Drilling Optimization by Non-Rotating Stabilizer

Directional Drilling Optimization by Non-Rotating Stabilizer Directional Drilling Optimization by Non-Rotating Stabilizer Eisa Noveiri, Adel Taheri Nia Abstract The Non-Rotating Adjustable Stabilizer / Directional Solution (NAS/DS) is the imitation of a mechanical

More information

IADC DCS AND DSA-TS. Clinton D. Chapman Schlumberger DSA-TS Deputy Chairman

IADC DCS AND DSA-TS. Clinton D. Chapman Schlumberger DSA-TS Deputy Chairman IADC DCS AND DSA-TS Clinton D. Chapman Schlumberger DSA-TS Deputy Chairman Agenda Automation What is DSATS? Objectives DSATS Communication Team (Comms Team) Phases Where can IADC DCS help? 2 Definitions

More information

(12) United States Patent

(12) United States Patent US009080428B1 (12) United States Patent Rembach et al. (10) Patent No.: (45) Date of Patent: Jul. 14, 2015 (54) DRILLING RIG WITH POSITION AND VELOCITY MEASURING TOOL FOR STANDARD AND DIRECTIONAL DRILLING

More information

MWD and Surveying Services

MWD and Surveying Services MWD and Surveying Services Offering More MWD options, with more reliability, for more optimized directional-drilling operations in any well environment From routine to extreme, we deliver. Drilling Evaluation

More information

UItiMotion. Paul J. Gray, Ph.D. Manager Path Planning Front-End Design R&D

UItiMotion. Paul J. Gray, Ph.D. Manager Path Planning Front-End Design R&D UItiMotion Paul J. Gray, Ph.D. Manager Path Planning Front-End Design R&D What is UltiMotion? An entirely new software-based motion control system Wholly owned by Hurco Awarded 4 patents Superior to Hurco

More information

High Accuracy Wellbore Surveys Multi-Station Analysis (MSA)

High Accuracy Wellbore Surveys Multi-Station Analysis (MSA) 1 High Accuracy Wellbore Surveys Multi-Station Analysis (MSA) Magnetic MWD measurement Uncertainty Conventional MWD Tools report their own orientation: Inclination, Azimuth, and Toolface. These reported

More information

THE NEW METHOD OF DIRECTIONAL DRILLING BY NON-ROTATING ADJUSTABLE STABILIZER

THE NEW METHOD OF DIRECTIONAL DRILLING BY NON-ROTATING ADJUSTABLE STABILIZER THE NEW METHOD OF DIRECTIONAL DRILLING BY NON-ROTATING ADJUSTABLE STABILIZER Eisa Novieri, E.novieri@siau.ac.ir, Department of Petroleum Engineering, Islamic Azad University Susangerd Branch, Susangerd,

More information

AADE-05-NTCE-67. A Gravity-Based Measurement-While-Drilling Technique Determines Borehole Azimuth From Toolface and Inclination Measurements

AADE-05-NTCE-67. A Gravity-Based Measurement-While-Drilling Technique Determines Borehole Azimuth From Toolface and Inclination Measurements AADE-05-NTCE-67 A Gravity-Based Measurement-While-Drilling Technique Determines Borehole Azimuth From Toolface and Inclination Measurements Herbert Illfelder, Ken Hamlin, Graham McElhinney - PathFinder

More information

Well Placement and Ranging Services. Charles Duck

Well Placement and Ranging Services. Charles Duck Well Placement and Ranging Services Charles Duck The RADAR services encompass: SAGD (well twinning) applications Well Intercept (well kill) applications Well Avoidance applications Gravity MWD (provide

More information

TL LONGBOW v

TL LONGBOW v http://www.trantlogistics.com eric@trantlogistics.com for licensing and technical support nate@trantlogistics.com for sales and pricing USER'S MANUAL Directional Driller, Proximity, Planner Edition January

More information

Drilling Guidance System for the Office Quick Tips

Drilling Guidance System for the Office Quick Tips Overview The Pason Drilling Guidance System (DGS) provides real-time guidance while drilling, based on data that has been analyzed in the office. It helps optimize communication between drilling rig crews

More information

A-SERIES BED MILLS. 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations. Featuring Semi-Automatic + Conversational Programming + G-Code

A-SERIES BED MILLS. 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations. Featuring Semi-Automatic + Conversational Programming + G-Code A-SERIES BED MILLS 3-Axis CNC for Job Shops, Tool Rooms, and Production Operations Featuring Semi-Automatic + Conversational Programming + G-Code A-Series Bed Mills are offered in two styles: NC HEAD The

More information

Improved Drilling Efficiency Technique Using Integrated PDM and PDC Bit Parameters H.R. MOTAHHARI, G. HARELAND University of Calgary

Improved Drilling Efficiency Technique Using Integrated PDM and PDC Bit Parameters H.R. MOTAHHARI, G. HARELAND University of Calgary PETROLEUM SOCIETY CANADIAN INSTITUTE OF MINING, METALLURGY & PETROLEUM PAPER 2008-132 Improved Drilling Efficiency Technique Using Integrated PDM and PDC Bit Parameters H.R. MOTAHHARI, G. HARELAND University

More information

A Hybrid Approach to Closed-loop Directional Drilling Control using Rotary Steerable Systems

A Hybrid Approach to Closed-loop Directional Drilling Control using Rotary Steerable Systems Proceedings of the 2012 IFAC Workshop on Automatic Control in Offshore Oil and Gas Production, Norwegian University of Science and Technology, Trondheim, Norway, May 31 - June 1, 2012 ThB1.4 A Hybrid Approach

More information

One Release. One Architecture. One OS. High-Performance Networking for the Enterprise with JUNOS Software

One Release. One Architecture. One OS. High-Performance Networking for the Enterprise with JUNOS Software Solution Brochure High-Performance Networking for the Enterprise with JUNOS Software Using the Network to Achieve Higher Availability, Lower OPEX and Improved Productivity for Your Business Core Branch

More information

Servo-conventional milling machine

Servo-conventional milling machine Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the

More information

Automation of Static and Dynamic FEA Analysis of Bottomhole Assemblies

Automation of Static and Dynamic FEA Analysis of Bottomhole Assemblies Automation of Static and Dynamic FEA Analysis of Bottomhole Assemblies Nader E. Abedrabbo, Lev Ring & Raju Gandikota 1 Weatherford International 11909 Spencer Road, Houston, TX nader.abedrabbo@weatherford.com

More information

How Adaptive Systems unlock big productivity gains

How Adaptive Systems unlock big productivity gains profile Drive & Control Technical Article How Adaptive Systems unlock big productivity gains In this article, helpful insights regarding: Identifying applications where vibration control can boost throughput

More information

MWD Software Datasheet

MWD Software Datasheet Features Confi gure inputs to and outputs from. Collect and display unfi ltered, live bit run data from the EM dipole. Save bit run data to a fi le. Playback previously recorded bit run data. Display parity

More information

SUPPORTING LINEAR MOTION: A COMPLETE GUIDE TO IMPLEMENTING DYNAMIC LOAD SUPPORT FOR LINEAR MOTION SYSTEMS

SUPPORTING LINEAR MOTION: A COMPLETE GUIDE TO IMPLEMENTING DYNAMIC LOAD SUPPORT FOR LINEAR MOTION SYSTEMS SUPPORTING LINEAR MOTION: A COMPLETE GUIDE TO IMPLEMENTING DYNAMIC LOAD SUPPORT FOR LINEAR MOTION SYSTEMS Released by: Keith Knight Catalyst Motion Group Engineering Team Members info@catalystmotiongroup.com

More information

With a CardScan. You Can... Contact Management System. Digitize. Synchronize. Organize. Prioritize

With a CardScan. You Can... Contact Management System. Digitize. Synchronize. Organize. Prioritize Scan business cards in seconds or drag-and-drop Sync to your Windows mobile devices, smart phone, Blackberry. Categorize your contacts any way you want, search Put first things first; spend your time where

More information

Premium Drillpipe. for Optimal Performance

Premium Drillpipe. for Optimal Performance Premium Drillpipe for Optimal Performance DRILCO offers a full line of premium drillpipe available in a variety of sizes with API and non-standard wall thickness to deliver optimal torque, weight, and

More information

MasterAir Maker 8. Sales Kit

MasterAir Maker 8. Sales Kit MasterAir Maker 8 Sales Kit December 11, 2015 Introducing the MasterAir Maker 8 The MasterAir Maker 8 is designed for gamers and overclockers who demand ultra-low temperatures, aggressive LED lighting,

More information

AADE-03-NTCE-10. Real-Time Drilling Optimization Based on MWD Dynamic Measurements Field Test Results

AADE-03-NTCE-10. Real-Time Drilling Optimization Based on MWD Dynamic Measurements Field Test Results AADE-03-NTCE-10 Real-Time Drilling Optimization Based on MWD Dynamic Measurements Field Test Results Dashevskiy D. 1, Macpherson J.D. 1, Dubinsky V. 1, McGinley P. 1, 1 Baker Hughes Copyright 2003 AADE

More information

6 AXIS ROBOTIC ABRASIVEJET ADVANCEMENTS IN ACCURACY FOR QUALITY AND PRODUCTION

6 AXIS ROBOTIC ABRASIVEJET ADVANCEMENTS IN ACCURACY FOR QUALITY AND PRODUCTION 2007 American WJTA Conference and Expo August 19-21, 2007 Houston, Texas Paper 6 AXIS ROBOTIC ABRASIVEJET ADVANCEMENTS IN ACCURACY FOR QUALITY AND PRODUCTION Duane Snider Flow Automation Applications Group

More information

Software Release Notes

Software Release Notes Software Release Notes Version 3.07.04.00 January 2019 A. Software Description KellyDown is a well-planning and survey monitoring application designed specifically for use by well-planners and/or directional

More information

Numturn Numturn Powerful CNC Technology, for high flexibility and easy handling. CNC Cycle Lathes.

Numturn Numturn Powerful CNC Technology, for high flexibility and easy handling. CNC Cycle Lathes. CNC Cycle Lathes Powerful CNC Technology, for high flexibility and easy handling Siemens 808 D Manual Machine Plus or Fagor 8055i Turning diameter over bed 660 mm Center width up to 2000 mm Main spindle

More information

Flexible claw couplings ELKU-N

Flexible claw couplings ELKU-N Flexible claw couplings ELKUN KWN 01 Couplings from Dresden / Germany By specialists for specialists řemeny, převody a lineární technika general information buffer part hub technical features The flexible

More information

Paper Title: Real-Time Bit Wear Optimization Using the Intelligent Drilling Advisory System

Paper Title: Real-Time Bit Wear Optimization Using the Intelligent Drilling Advisory System [136006] 149 Appendix A SPE 136006 Paper Title: Real-Time Bit Wear Optimization Using the Intelligent Drilling Advisory System B. Rashidi, G. Hareland, M. Tahmeen, M. Anisimov and S. Abdorazakov, SPE,

More information

P-Series Drive Features and Benefits

P-Series Drive Features and Benefits P-Series Drive Features and Benefits P000 P000 P000 Value DC Input Stepper Drive Wave matching for Kollmorgen motors to provide optimal performance All inputs and outputs are optically isolated Step and

More information

INTELLISERV PRODUCT CATALOG

INTELLISERV PRODUCT CATALOG INTELLISERV PRODUCT CATALOG INTELLISERV PRODUCT CATALOG 2 Table of Contents IntelliServ Network General Overview Wired Drill Pipe BHA Components Wired Heavy Weight Drill Pipe Wired Drill Collars Stabilizers

More information

Pason Live User Guide. Revision 14 of DOCU311 Revised December 6, 2018

Pason Live User Guide. Revision 14 of DOCU311 Revised December 6, 2018 Pason Live User Guide Revision 14 of DOCU311 Revised December 6, 2018 This document contains proprietary information and is not intended for public distribution. Pason Systems and all other trademarks

More information

High Temperature Downhole Electronics

High Temperature Downhole Electronics High Temperature Downhole Electronics Products and Services for Oil and Gas Applications www.wattandwell.com WATT & WELL At the forefront of innovation, WATT&WELL continues its mission of providing the

More information

2D CONSTRUCTION SOLUTIONS

2D CONSTRUCTION SOLUTIONS 2D CONSTRUCTION SOLUTIONS 2D CONSTRUCTION SOLUTIONS Keep your projects on time and under budget. We have the leadingedge hardware, software, and mobile solutions you need to increase efficiency, improve

More information

3 SERIES DIGITAL REGISTRATION SYSTEM. CompuTER WORKSTATION PRECISION

3 SERIES DIGITAL REGISTRATION SYSTEM. CompuTER WORKSTATION PRECISION About US TM SERIES Engineered to complement the fast-paced printing industry of today, MultiCam s Celero Series is the next generation of Digital Cutting Systems as they offer one of the fastest knife

More information

Security for Wireless Handhelds

Security for Wireless Handhelds wireless security solutions security applications developer toolkits professional services Security for Wireless Handhelds integrating strong, transparent security without increasing costs or time-to-market

More information

PGS hyperbeam - rapid scenario-testing of velocity models to optimize depth imaging

PGS hyperbeam - rapid scenario-testing of velocity models to optimize depth imaging A Publication of Petroleum Geo-Services Vol. 10 No. 4 April 2010 PGS hyperbeam - rapid scenario-testing of velocity models to optimize depth imaging Introduction Depth imaging is now established as a key

More information

HFRe NEXT GENERATION DRILLING RISER

HFRe NEXT GENERATION DRILLING RISER HFRe NEXT GENERATION DRILLING RISER HFRe HANDS FREE RISER SYSTEM The HFRe Hands Free Riser System delivers Fast Make- Up and Automated Marine Riser Management. Dril-Quip has approached rig operational

More information

VLT Integrated Servo Drive ISD 510 flexible and open system

VLT Integrated Servo Drive ISD 510 flexible and open system Selection Guide VLT Integrated Servo Drive ISD 510 flexible and open system 1.7-13 Nm torque range gives you more design fl exibility in your decentralised system plans www.danfoss.com/drives Decentralised

More information

Positional Motion Profiling for FRC

Positional Motion Profiling for FRC Positional Motion Profiling for FRC Ryan Greenblatt A Zebramotion Labs White Paper: Brought to you by Team 900: http://team900.org Motion Profiling Overview This tutorial is intended for use of the CAN

More information

RACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8

RACO-ELECTRIC CYLINDER MODULAR SYSTEM HEAVY DUTY SERIES (TYPE 1) SIZE 4,5,6,7,8 SIZE,,,, HIGH-PERFORMANCE ELECTRIC CYLINDERS: ROBUST, RELIABLE AND FLEXIBLE RETRO-FITTING The RACO actuator system is of modular design, and thus enables the combination of the most important integral

More information

Vision Solutions for Oil & Gas

Vision Solutions for Oil & Gas Vision Solutions for Oil & Gas with drillereye you fly watch video http://youtu.be/pvffya3fdiy What we do Drillereye designs, produces and installs video surveillance systems for land and off-shore RIGS.

More information

DELTA TAU Data Systems, Inc.

DELTA TAU Data Systems, Inc. DELTA TAU Data Systems, Inc. Last revision: 12/5/01 Why PMAC Controllers Are Easy To Use Delta Tau s PMAC and Turbo PMAC families of controllers justly have the reputation as being the most powerful and

More information

Tri Tr t i e t x e Expert Softwar Softwar O verview Overview

Tri Tr t i e t x e Expert Softwar Softwar O verview Overview Tritex Expert Software Overview Free download available at www.exlar.com/software Getting Started To get started, select File New Application Select Drive Series, Option Board, and Application templates,

More information

LabCenter 260. LabCenter 260. CNC Milling Machine. Compact Machine for Training Purposes and Small Batch Production - with Siemens control

LabCenter 260. LabCenter 260. CNC Milling Machine. Compact Machine for Training Purposes and Small Batch Production - with Siemens control CNC Milling Machine Compact Machine for Training Purposes and Small Batch Production - with Siemens control Travel X-axis Y-axis Z-axis Spindle speed max. Tool changer 251 mm 152 mm 168 mm 5000 rpm 4 stations

More information

50 years of Reliable Field History

50 years of Reliable Field History COUPLING COMMENTS The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 0 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges

More information

Getting more from your Engineering Data. John Chapman Regional Technical Manager

Getting more from your Engineering Data. John Chapman Regional Technical Manager Getting more from your Engineering Data John Chapman Regional Technical Manager 2012 HALLIBURTON. ALL RIGHTS RESERVED. Getting more from your Engineering Data? extracting information from data to make

More information

2D CONSTRUCTION SOLUTIONS

2D CONSTRUCTION SOLUTIONS 2D CONSTRUCTION SOLUTIONS 2D CONSTRUCTION SOLUTIONS Keep your projects on time and under budget. We have the leadingedge hardware, software, and mobile solutions you need to increase efficiency, improve

More information

Making hybrid IT simple with Capgemini and Microsoft Azure Stack

Making hybrid IT simple with Capgemini and Microsoft Azure Stack Making hybrid IT simple with Capgemini and Microsoft Azure Stack The significant evolution of cloud computing in the last few years has encouraged IT leaders to rethink their enterprise cloud strategy.

More information

IntelliServ Product Catalog

IntelliServ Product Catalog IntelliServ Product Catalog DataSwivel* Table of Contents IntelliServ Network General Overview... 3 Wired Drill Pipe... 4 BHA Components Wired Heavy Drill Pipe... 5 Wired Drill Collars... 5 Stabilizers...

More information

Flow Measurement Applications

Flow Measurement Applications Flow Measurement Applications ONICON has been a leading provider of the flow and energy measurement solutions required by the HVAC industry for the past 30 years. As the need for accurate and reliable

More information

Inductive sensors with IO-Link interface

Inductive sensors with IO-Link interface Ready for the future? Inductive sensors with IO-Link interface www.ipf-electronic.com Our sensors ensure your success 1 Industry 4.0 IO-Link: Your interface to the future The fourth industrial revolution

More information

Number: Passing Score: 825 Time Limit: 120 min File Version: Vendor: Cisco. Exam Code:

Number: Passing Score: 825 Time Limit: 120 min File Version: Vendor: Cisco. Exam Code: 700-104 Number: 000-000 Passing Score: 825 Time Limit: 120 min File Version: 130705 http://www.gratisexam.com/ Vendor: Cisco Exam Code: 700-104 Exam Name: Business Edition 6000 for Account Managers (BE6KAM)

More information

Mitigating the Risks Associated With the Acquisition of Formation Evaluation Data

Mitigating the Risks Associated With the Acquisition of Formation Evaluation Data AADE-07-NTCE-27 Mitigating the Risks Associated With the Acquisition of Formation Evaluation Data Robert S. Kuchinski, Weatherford International; Robert J. Stayton, Weatherford International Copyright

More information

SIL certified safety for people, the environment and machinery Overview of PROGNOST -SILver safety analyses... 6

SIL certified safety for people, the environment and machinery Overview of PROGNOST -SILver safety analyses... 6 PROGNOST -SILver Content SIL certified safety for people, the environment and machinery... 4 Overview of PROGNOST -SILver safety analyses... 6 Safety loop from sensor to safety controller... 8 Technical

More information

White Paper. RingCentral. Professional Services Implementation & Onboarding Methodology

White Paper. RingCentral. Professional Services Implementation & Onboarding Methodology White Paper RingCentral Professional Services Implementation & Onboarding Methodology RingCentral Professional Services Implementation & Onboarding Methodology Any technology transition can be challenging;

More information

The VLT Micro Drive Small drive maximum strength and reliability

The VLT Micro Drive Small drive maximum strength and reliability MAKING MODERN LIVING POSSIBLE The VLT Micro Drive Small drive maximum strength and reliability Ready Set Go! Connect motor and power cables, turn the control knob, and watch the motor speed change. 12

More information

UNIFIED PERFORMANCE MANAGEMENT

UNIFIED PERFORMANCE MANAGEMENT UNIFIED PERFORMANCE MANAGEMENT VISIBILITY CONTROL OPTIMIZATION COMPLETE WAN OPTIMIZATION Increase the speed and efficiency of your wide area network. Exinda s Unified Performance Management (UPM) solution

More information

Pad Drilling Using Magnetic MWD

Pad Drilling Using Magnetic MWD Pad Drilling Using Magnetic MWD Managing Magnetic Interference from nearby casing Neil Bergstrom, P.E. Wellbore Geodetic Specialist Devon Energy ISCWSA SPE Wellbore Positioning i Tech Section Denver 3

More information

A STUDY ON ANTI-JERK CONTROL OF BUILDING MAINTENANCE ROBOT SYSTEM

A STUDY ON ANTI-JERK CONTROL OF BUILDING MAINTENANCE ROBOT SYSTEM A STUDY ON ANTI-JERK CONTROL OF BUILDING MAINTENANCE ROBOT SYSTEM Seunghoon Lee, Dong-Hyung Kim, Sungpil Kang, and *Chang-Soo Han Dept. of Mechanical Engineering, Hanyang University 222, Wangsimni-ro Seongdong-gu,

More information

Closed Loop. EC-Servo screwdriving technology. EC-Servo stroke technology ADAPTIVE. Advantages:

Closed Loop. EC-Servo screwdriving technology. EC-Servo stroke technology ADAPTIVE. Advantages: Closed Loop EC-Servo screwdriving technology EC-Servo stroke technology ADAPTIVE The recognition of penetration is independent from tolerances in the fasteners and products. The process parameters will

More information

High Performance. Glass machining

High Performance. Glass machining High Performance Glass machining 3M TM WENDT TM Automotive Sharpening Stones for C-Edge Grinding Wheels and Monobloc Drills English optimal designed sharpening stones for WENDT tools enhancement efficiency

More information

Real-time, 3D visualization drilling supervision system targets ECD, downhole pressure control

Real-time, 3D visualization drilling supervision system targets ECD, downhole pressure control Real-time, 3D visualization drilling supervision system targets ECD, downhole pressure control By Rolv Rommetveit, Knut Bjorkevoll, SINTEF Petroleum Research; Sven Inge Ødegård, Hitec Products Drilling

More information

Fully electric: JT The vertical machines from 400 to 2,200 kn MACHINES HYDRAULICS SERVICE

Fully electric: JT The vertical machines from 400 to 2,200 kn MACHINES HYDRAULICS SERVICE Fully electric: JT The vertical machines from 400 to 2,200 kn A competent partnership with JSW Oldenburg Auetal Neuss Heidelberg Hanau Frankfurt Herzogenaurach Ulm Since 2007, WINDSOR has been the official

More information

OPTIMIZING YOUR SCREENING PROCESS

OPTIMIZING YOUR SCREENING PROCESS OPTIMIZING YOUR SCREENING PROCESS A GREAT RANGE OF SCREENS FOR ALL APPLICATIONS Our screens are the result of over 50 years of continuous development All critical components have been field-tested with

More information

See What You ve Been Missing

See What You ve Been Missing Total Solutions in Particle Characterization See What You ve Been Missing LxWxT=3D in ONE Analysis Microtrac Image Analysis PartAn Product Family Proven technology that provides superior measurement capability

More information

Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC

Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC Wireless transfer to tablet PC Saving space without PC cabinet and fewer cables Flexible, mobile and highly accurate Easy 3D:

More information

A Dynamic Support System For Wellbore Positioning Quality Control While Drilling

A Dynamic Support System For Wellbore Positioning Quality Control While Drilling A Dynamic Support System For Wellbore Positioning Quality Control While Drilling Dr. Cyrille Mathis, Director & CSO, ThinkTank Maths (Edinburgh) IOGP Geomatics / Statoil Industry Day 2017 26 th April 2017

More information

2014 Utility Systems Technologies, Inc. v1.1

2014 Utility Systems Technologies, Inc. v1.1 2014 Utility Systems Technologies, Inc. v1.1 Utility Systems Technologies, Inc. P.O. Box 110, Latham, NY 12110 Phone: 001-518-326-4549 Fax: 001-518-326-4826 Web: ustpower.com Email: sales@ustpower.com

More information

Securing Your Digital Transformation

Securing Your Digital Transformation Securing Your Digital Transformation Security Consulting Managed Security Leveraging experienced, senior experts to help define and communicate risk and security program strategy using real-world data,

More information

Faculty of Science and Technology MASTER S THESIS

Faculty of Science and Technology MASTER S THESIS Faculty of Science and Technology MASTER S THESIS Study program/ Specialization: Petroleum technology Drilling Technology Spring semester, 2011 Writer: Knut Tveitan Faculty supervisor: Eirik Kårstad Seyed

More information

Hybrid WAN Operations: Extend Network Monitoring Across SD-WAN and Legacy WAN Infrastructure

Hybrid WAN Operations: Extend Network Monitoring Across SD-WAN and Legacy WAN Infrastructure Hybrid WAN Operations: Extend Network Monitoring Across SD-WAN and Legacy WAN Infrastructure An ENTERPRISE MANAGEMENT ASSOCIATES (EMA ) White Paper Prepared for SevOne May 2017 IT & DATA MANAGEMENT RESEARCH,

More information

L&J engineering s Wireless Systems. Wireless Level Gauging. company

L&J engineering s Wireless Systems. Wireless Level Gauging. company L&J engineering s Wireless Systems Wireless Level Gauging an company evolving wireless solutions Reliability. Convenience. Simplicity. L&J Engineering s line of wireless-ready products for the inventory

More information

Inkjet Printer UX Series

Inkjet Printer UX Series Inkjet Printer UX Series Coding Solutions by Hitachi Hitachi UX-Series For over 40 years, Hitachi has developed and produced high-performance ink jet printers based on the well-proven Continuous InkJet

More information

横店东磁 DMEGC. 横店集团成员企业 A Member of HENGDIAN Group

横店东磁 DMEGC. 横店集团成员企业 A Member of HENGDIAN Group 横店东磁 DMEGC 横店集团成员企业 A Member of HENGDIAN Group Introduction of DMEGC Three main industry Magnetic Material Renewable Energy Terminal component Hard ferrite magnet Soft ferrite core Pre-sintered material

More information

GF Revit Manual for SANIPEX

GF Revit Manual for SANIPEX GF Revit Manual for SANIPEX May 2018 Contents 1 Working with Pipes, Fitting and Accessories... 3 1.1 Working with pre-insulated pipes... 3 1.2 Working with Flexible Pipes... 3 1.3 Working with Cross Fittings...

More information

Advanced Features. High Performance Stepper Drive Description. Self Test and Auto Setup

Advanced Features. High Performance Stepper Drive Description. Self Test and Auto Setup www.applied-motion.com STAC6 High Performance Stepper Drive Description The STAC6 represents the latest developments in stepper drive technology, incorporating features that will derive the highest performance

More information

EMBRACE CHANGE Computacenter s Global Solutions Center helps organizations take the risk out of business transformation and IT innovation

EMBRACE CHANGE Computacenter s Global Solutions Center helps organizations take the risk out of business transformation and IT innovation EMBRACE CHANGE Computacenter s Global Solutions Center helps organizations take the risk out of business transformation and IT innovation SOLUTIONS CENTER SOLUTION SUMMARY From digitalization initiatives

More information

Directional Casing While Drilling

Directional Casing While Drilling Directional Casing While Drilling Bill B. DuBose Senior Drilling Specialist Schlumberger Drilling and Measurements Phone: 337-296-7909 E-mail: BDubose@ slb.com Directional Casing While Drilling With RSS

More information

Houston Digital Instruments, Inc. Product Catalog

Houston Digital Instruments, Inc. Product Catalog Houston Digital Instruments, Inc. Product Catalog 2000B-Low Cost 2400-Custom Options 3300-Temperature 2100-Stroke Counter (1-4) 2200-Position Indicator 2000P-Parking Meter Issue date: September 29, 2003

More information

HYBRID STORAGE TM. WITH FASTier ACCELERATION TECHNOLOGY

HYBRID STORAGE TM. WITH FASTier ACCELERATION TECHNOLOGY HYBRID STORAGE TM WITH FASTier ACCELERATION TECHNOLOGY Nexsan s FASTier acceleration technology uses advanced software architecture and algorithms to leverage the power of solid-state to accelerate the

More information

Asset 4000 Hardware Installation Guide

Asset 4000 Hardware Installation Guide Asset 4000 v1.0 Installation Guide Page 1 of 11 Asset 4000 Hardware Installation Guide Table of Contents Installation Overview 1 Mounting Location Selection 2 Mounting Hardware 3 Power Up and Down 4 Replacing

More information

Relief Well Ranging Strategy

Relief Well Ranging Strategy Relief Well Ranging Strategy L. Wm Bill Abel ABEL Engineering LLP Houston, Texas 77027 USA www.abel-engr.com 1 Relief Well History Santa Barbara oil spill occurred in January 1969 in the Santa Barbara

More information

Workbench Simulation. Contact Analysis. 1 ANSYS, ANSYS, Inc. Inc. Proprietary

Workbench Simulation. Contact Analysis. 1 ANSYS, ANSYS, Inc. Inc. Proprietary Workbench Simulation Contact Analysis 1 ANSYS, ANSYS, Inc. Inc. Proprietary Objective and Outline Contact related features available in ANSYS Workbench Contact objects Initial contact status Contact meshing

More information

Maintain, Repair, Rebuild, Protect. Solutions for Industrial Asset Maintenance and Reliability

Maintain, Repair, Rebuild, Protect. Solutions for Industrial Asset Maintenance and Reliability Maintain, Repair, Rebuild, Protect Solutions for Industrial Asset Maintenance and Reliability Henkel. Solutions for All Your Maintenance Challenges. Maintain, Repair, Rebuild and Protect Industrial Equipment.

More information

712 DC Series Gearmotor Guide

712 DC Series Gearmotor Guide 712 DC Series Gearmotor Guide Best-in-Class Right Angle Hypoid Gearmotors Compact size Variable speed control Advanced hypoid gearing technology for improved energy efficiency Maximum power density means

More information