Standard Releasing Spear. Manual B215

Transcription

1 Standard Releasing Spear Manual B215

2 NOTES

3 Contents Standard Releasing Spear Overview... 2 Use... 2 Construction... 2 Illustrations Spear Assembly with Flush-Type Mandrel... 3 Spear Assembly with Shoulder-Type Mandrel... 3 Optional Nuts... 3 Operation... 2 Precautions... 2 Internal Cutting... 4 Engaging a Fish... 4 Releasing a Fish... 4 Assembly... 4 Assembly of Releasing Spear... 4 Assembly of Spear Pack-off... 4 Maintenance... 4 Disassembly of Releasing Spear... 5 Disassembly of Spear Pack-off... 5 Principal Dimensions Complete Assemblies and Parts Lists Recommended Tightening Torques Releasing Spear Grapple Range Charts Calculated Strengths Segmented Spear Grapple Assembly Illustration Complete Assemblies and Parts Lists Releasing Spear Pack-off Assembly Assembly... 4 Maintenance... 4 Disassembly... 5 Illustration... 5 Replacement Packing Cups and Thimbles Releasing Spear Stop Sub Assembly Illustration Complete Assemblies and Parts Lists All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. 2nd Printing, August Rev. 1 Page 1 Standard Releasing Spear Manual B215

4 OVERVIEW Logan Standard Releasing Spears provide a positive means to internally engage and retrieve a fish from the well. The design of this rugged, dependable, and inexpensive internal catch fishing tool ensures positive engagement, easy release, and reengagement. USE The Logan Standard Releasing Spear can engage and retrieve tubing, casing, and drill pipe of all sizes. It may be used with other equipment such as spear pack-off assemblies and internal cutters. CONSTRUCTION The Logan Standard Releasing Spear consists of a mandrel, grapple, releasing ring, and a bull nose nut. The size and type of the upper box connection is furnished according to customer specification. Mandrel The mandrel type may be specified as either flush or shoulder. Flush-type mandrels are designed to completely enter the fish. Shoulder-type mandrels provide a positive landing position on top of the fish. The mandrel is made of high strength, specially heat-treated alloy steel. The lower end is threaded to accept a bull nose nut, or the optional sub, mill, and sidehill type nuts. Standard Spear Grapple One-piece spear grapples are designed and manufactured to engage a specific size and weight of tubing, casing, or drill pipe to ensure maximum surface engagement and minimum fish distortion. Segment-Type Spear Grapple The segment-type spear grapple enhances the spear s usefulness by providing an extended catching range beyond the maximum range of the standard one-piece grapple. The Logan Segment-Type Spear Grapple consists of a grapple body, eight grapple segments, two retainer rings, four retainer ring screws, six retainer ring spacers, and sixteen grapple segment screws. Refer to the illustration on page 12. Release Ring The cammed release ring matches the cammed nut ensuring a positive locking device that will not freeze or jam. It is a standard component of the releasing spear. Nut The standard bottom nut is a bull nose nut. Optional nut types sub, mill, and sidehill are available. Refer to the illustrations on page 3. When other tools, such as a spear pack-off assembly or internal cutters, will be utilized below the releasing spear, the sub type nut replaces the standard bull nose nut to provide the required connection. The mill type nut mills away jagged ends of a fish to ensure entry into the fish. It can also effectively drill out sand from a plugged fish. A sidehill type nut is used to align the Releasing Spear with a fish that is imbedded in the side wall of the hole. Heavy Duty Releasing Spears Logan Heavy Duty Releasing Spears (assemblies designated as HD in the parts lists) are used in situations where a swelling of the fish presents a problem. These assemblies have relatively longer mandrels and grapples than standard (STD) spears resulting in more supported wickered area to engage the fish. The longer mandrel and grapple distribute the swelling forces over a greater area, thereby substantially reducing those forces. Heavy Duty Releasing Spears are less prone to damage from swelling of the fish and are actually stronger than a Standard Releasing Spear even though the tensile strength of the mandrels are the same. Stop Sub Assembly The Logan Releasing Spear Stop Sub Assembly is an accessory designed to convert a releasing spear with a flush-type mandrel into a shouldered type spear. It is installed in the box connection at the top of the mandrel when the use of a positive stop is desired or required. A stop ring can be added to increase shoulder diameter. All stop rings are furnished with left-hand threads. See page 32 for more information. Spear Pack-off Assembly Pack-off assemblies are available for all Logan Standard Releasing Spear Assemblies and are designed to efficiently pack off all sizes of drill pipe, tubing and casing. Circulation through the fish is enabled by attaching the Spear Pack-off Assembly to the bottom of the spear with a sub type nut. See pages for more information. OPERATION Precautions Always maintain a moderate upward strain on the fishing string when rotating either to the left or right during operation. It may be necessary to rotate the fishing string more than a full turn to set or release the Releasing Spear in deep or crooked holes. Additional moderate rotation does not harm the Releasing Spear or the operation. Always bump down the full weight of the fishing string before beginning the releasing operation. Manual B215 Standard Releasing Spear Page 2

5 Flush-Type Mandrel Shoulder-Type Mandrel Spear Grapple Spear Grapple Release Ring Release Ring Bull Nose Nut Bull Nose Nut Spear Assembly with Flush Type Mandrel Spear Assembly with Shoulder Type Mandrel Optional Nuts Sidehill Type Nut Sub Type Nut Mill Type Nut Page 3 Standard Releasing Spear Manual B215

6 Internal Cutting When running an internal cutter below the releasing Spear, replace the bullnose nut with a sub type nut. Pipe between the internal cutter and Releasing Spear enables the Spear to remain above the fish during the cutting operation. The Spear is lowered into the cut-off section to retrieve it after the cut has been completed. Engaging a Fish The Logan Releasing Spear is made up to the bottom of the fishing string and lowered to the desired depth into the fish. Rotate the mandrel one full rotation to the left to turn the mandrel through the spear grapple and move the spear grapple into engaging position. Pulling straight up will cause the tapers on the mandrel to expand the spear grapple and allow it to positively engage the fish. Releasing a Fish To release the fish, bump down and make two to three rotations to the right. This right-hand rotation allows the mandrel to move up through the spear grapple thereby placing the spear grapple against the release ring and putting the spear in release position. Combined right-hand rotation with straight upward pull will release the spear from the fish. Continue with slow, right-hand rotation until the Releasing Spear is clear of the fish. ASSEMBLY Assembly of Releasing Spear The Logan Standard Releasing Spear can easily be assembled at the rig site where it will be used. Check all parts to ensure that they are in good working condition before beginning assembly. Make sure the Releasing Spear is the proper size for the operation. (Refer to the Releasing Spear Grapple Range Charts on pages ) Thoroughly clean and lubricate parts. If the tool will be stored for a long period, paint or lubricate the exterior surfaces to prevent corrosion. Refer to the illustration on page 3 and proceed with assembly as follows: 1. Clamp the Releasing Spear horizontally into a suitable vise, securing the upper mandrel joint end. CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Heavily grease the helix of the mandrel. 3. Install the spear grapple on the lower pin end of the mandrel, screwing it on with left-hand (counterclockwise) rotation. Grease the interior of the grapple if it is large. 4. Slip the release ring onto the mandrel with the cams facing downward towards the nut. 5. Apply thread dope or lubricant to the threads on the lower end of the mandrel. Install the nut and tighten. 6. Screw the grapple down the helix until it rests against the release ring and nut. Hand tighten. 7. Paint or lubricate exterior surfaces to prevent corrosion. 8. Tighten all connections to the recommended torque before running the Standard Releasing Spear in the hole. Refer to the Recommended Tightening Torque tables on page 12. Assembly is now complete and the tool is ready for service. Assembly of Spear Pack-off Refer to the illustration on page 5 and proceed with assembly as follows: 1. Clamp the assembly horizontally into a suitable vise, securing the lower end of the pack-off mandrel. CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Slide the stabilizer onto the mandrel. 3. Slide the packing cup onto the mandrel with the large open end facing downward. Make sure it is seated properly on the mandrel shoulder. 4. Slide the thimble onto the mandrel and onto the packing cup. Force it down tightly around the upper end of the packing cup. 5. Apply thread dope or grease to the mandrel threads. Install the adapter sub onto the mandrel and tighten. 6. Paint or lubricate the exterior metal surfaces of the assembly. NOTE: Do not paint or lubricate the packing cup. Paint, sunlight, solvents, and most lubricants are harmful to rubber products. Assembly is now complete. MAINTENANCE Maintenance of the Standard Releasing Spear and Spear Pack-off Assembly is simple, but important. After each use, the tools should be completely disassembled, thoroughly inspected, and repaired as required. Before reassembling, inspect all parts, especially the grapple. Check the wickers for damage and wear to ensure safe operation. Clean and lubricate parts as they are reassembled. Grease or paint the exterior to prevent corrosion. Examine the packing cup of the Releasing Spear Pack-off Assembly for wear or damage. Replace the packing cup if necessary. (Refer to pages for packing cup and thimble part numbers.) Manual B215 Standard Releasing Spear Page 4

7 NOTE: Do not paint or lubricate the packing cup. Paint, sunlight, solvents, and most lubricants are harmful to rubber products. Disassembly of Releasing Spear Refer to the illustration at right and proceed with disassembly as follows: 1. Clamp the Releasing Spear horizontally into a suitable vise and secure the upper mandrel joint end. CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Loosen and remove the nut or spear pack-off-assembly. 3. Slide the release ring from the mandrel. 4. Remove the spear grapple by screwing it down the helix with righthand (clockwise) rotation. Disassembly is now complete. Disassembly of Spear Pack-off Refer to illustration at right and proceed with disassembly as follows: 1. Clamp the assembly horizontally into a suitable vise and secure the lower end of the pack-off mandrel. Adapter Sub Thimble Packing Cup Stabilizer (removable) Pack-off Mandrel CAUTION: Use only enough gripping action in the vise to break the connections. Avoid making heavy tool marks. 2. Loosen and remove the adapter sub. 3. Slide off the thimble. 4. Remove the packing cup. Logan Releasing Spear Pack-off Assembly 5. Remove the stabilizer. Disassembly is now complete. Page 5 Standard Releasing Spear Manual B215

8 STANDARD RELEASING SPEARS PRINCIPAL DIMENSIONS B C E G F A H I J SHOULDER TYPE SPEAR SHOULDER FLUSH TYPE ONLY TYPE ONLY MANDREL SPEAR SIZE CLASS ID A B C D E F OD Pipe Standard 1-1/2 4-1/ /8 F OD Pipe Standard 1-5/ /16 F OD Tubing Standard 1-13/ /32 3-5/16 F OD Tubing Standard 2-1/ /16 F /8 OD Drill Pipe Standard 3-1/ /32 F /8 OD Tubing Standard 3/8 3-1/ /4 F /8 OD Tubing Standard 3/8 3-1/ F /8 OD Tubing Standard 3/8 3-3/ /4 6-3/4 F /8 OD Tubing Heavy Duty 3/8 3-3/ /4 9 F /2 OD Tubing Standard 1/2 3-3/ /2 10-1/2 12 F /2 OD Drill Pipe Heavy Duty 1/2 3-3/ /2 10-1/2 9-3/4 F OD Tubing Light Duty 3/4 3-3/4 7-1/ /8 8-1/8 F OD Tubing Standard 3/4 4-1/8 7-1/ /2 12 F /2 OD Tubing Light Duty 3/4 4-1/ /2 3-3/4 9-3/4 F /2 OD Tubing Standard 3/4 4-1/ /2 9-1/2 14-1/4 F OD Casing Light Duty 7/8 4-3/ /2 9-1/2 9-3/4 F OD Casing Standard 7/ / /4 F OD Casing Light Duty / F OD Casing Standard / F OD Casing Standard /2 16-1/2 14-5/8 F OD Casing Heavy Duty /2 13-1/2 21-3/8 F /8 OD Casing Standard 2-3/4 8-5/ /8 14-5/8 F /8 OD Casing Heavy Duty 2-3/4 8-5/8 20-7/8 21-3/8 F /8 OD Casing Standard 2-13/16 9-5/8 15-3/ /8 14-5/8 F /8 OD Casing Standard 2-13/16 9-5/8 20-7/8 21-3/8 F /8 OD Casing Standard 3-1/2 13-3/8 17-7/ /8 16-7/8 Notes: 1) For Flush or Shoulder type, specify O.D. of shoulder, A 2) Mandrel length desired, C Manual B215 Standard Releasing Spear Page 6

9 STANDARD RELEASING SPEARS PRINCIPAL DIMENSIONS D E G M F H L H K FLUSH TYPE SPEAR SHOULDER FLUSH TYPE ONLY TYPE ONLY MANDREL F G H I J K L M F1000 7/8 2-3/8 11/16 9-5/8 15-1/4 3/16 F /8 2-1/2 15/ / /16 1/4 F /8 2-1/2 1-1/8 7-11/ /16 3/8 F /4 5-5/8 1-3/8 10-5/ /16 7/16 F /4 6-17/ / /16 5/8 F /4 6-5/8 1-7/ /8 23-3/8 5/8 F /4 6-5/8 1-7/8 14-1/4 25-5/8 22-5/8 5/8 F / / /4 23-3/4 21 5/8 F / / / /4 5/8 F / / /2 32-1/2 5/8 F /8 8-1/8 2-1/2 16-5/8 31-1/8 5/8 F / /4 13-5/8 26-5/8 26-1/2 5/8 F / /4 18-1/2 31-1/2 31-1/2 5/8 F /2 10-3/4 3-5/8 16-3/ F / /8 21-1/4 35-3/4 33-3/4 3/4 F /2 10-5/8 4-1/ /4 31-7/8 29-7/8 13/16 F /2 10-5/8 4-1/ /4 36-3/8 36-7/8 13/16 F / /8 39-3/ /16 3-5/16 1-1/4 F / / /16 1-1/4 F /2 12-3/4 5-11/ /4 3-1/2 1-5/8 F /2 12-3/4 5-11/ /8 53-3/ /2 1-5/8 F /2 13-3/4 7-1/4 26-1/8 53-7/8 49-1/ /8 F /2 13-3/4 7-1/ /4 1-5/8 F / /4 25-1/ /4 6-1/4 1-5/8 F /2 13-3/4 8-1/ /4 1-5/8 F / /4 27-3/8 53-3/4 51-1/4 7-3/4 1-5/8 Notes: 1) For Flush or Shoulder type, specify O.D. of shoulder, A 2) Mandrel length desired, C Page 7 Standard Releasing Spear Manual B215

10 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D /8 2-3/8 2-3/8 SPEAR O.D. 11/16 7/8 NOM 1-1/8 1-3/8 1-11/16 1-7/8 1-7/8 SPEAR I.D. 3/8 3/8 DUTY CLASS STD STD STD STD STD STD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. F1000-A F1001-A F1002-A Bowen No A 19351A 11196A MANDREL (FLUSH TYPE) Logan Part No. F1000 F1001 F1002 F1004 F1005 F1007 F1008 Bowen No B 19351B 11196B GRAPPLE* Logan Part No. F3000 F3001 F3002 F3004 F3005 F3007 F3008 Bowen No RELEASE RING Logan Part No. F4000 F4001 F4002 F4004 F4005 F4007 F4007 Bowen No BULL NOSE NUT Logan Part No. F5000 F5001 F5002 F5004 F5005 F5007 F5007 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1000 F1001 F1002 F1004 F1005 F1007 F1008 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5000-A F5001-A F5002-A F5004-A F5005-A F5007-A F5007-A Bowen No A A A 9919-A 9648-A 1346-A 1346-A SUB TYPE NUT Logan Part No. F5000-B F5001-B F5002-B F5004-B F5005-B F5007-B F5007-B Bowen No B B B 9919-B 9648-B 1346-B 1346-B SIDE HILL NUT Logan Part No. F5000-C F5001-C F5002-C F5004-C F5005-C F5007-C F5007-C Bowen No C C C 9919-C 9648-C 1346-C 1346-C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 8

11 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D. 2-7/8 2-7/8 2-7/8 3-1/2 3-1/2 4 4 SPEAR O.D. 2-5/16 2-5/16 2-5/ /16 2-1/2 3-1/4 3-1/4 SPEAR I.D. 3/8 3/8 3/8 1/2 1/2 3/4 3/4 DUTY CLASS STD STD LH HD STD HD LD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1009 F10095 F1010 F1012 F1013 F1014 F1015 Bowen No GRAPPLE * Logan Part No. F3009 F30095 F3010 F3012 F3013 F3014 F3015 Bowen No RELEASE RING Logan Part No. F4009 F4009 F4009 F4012 F4013 F4015 F4015 Bowen No BULL NOSE NUT Logan Part No. F5009 F50095 F5009 F5012 F5013 F5014 F5015 Bowen No OPTIONAL MANDREL (SHOULDER TYPE) Logan Part No. F1009 F10095 F1010 F1012 F1013 F1014 F1015 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5009-A F50095-A F5010-A F5012-A F5013-A F5014-A F5015-A Bowen No A 1228-A 9413-A 533-A 9488-A SUB TYPE NUT Logan Part No. F5009-B F50095-B F5009-B F5012-B F5013-B F5014-B F5015-B Bowen No B 1228-B 9413-B 533-B 9488-B SIDE HILL NUT Logan Part No. F5009-C F50095-C F5009-C F5012-C F5013-C F5014-C F5015-A Bowen No C 1228-C 9413-C 533-C 9488-C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 9 Standard Releasing Spear Manual B215

12 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D. 4-1/2 4-1/ SPEAR O.D. 3-5/8 3-5/8 4-1/32 4-1/ /4 SPEAR I.D. 3/4 3/4 7/ DUTY CLASS LD STD LD STD LD STD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1016 F1017 F1018 F1019 F1022 F1023 F1024 Bowen No GRAPPLE * Logan Part No. F3016 F3017 F3018 F3019 F3022 F3023 F3024 Bowen No RELEASE RING Logan Part No. F4017 F4017 F4019 F4019 F4023 F4023 F4024 Bowen No BULL NOSE NUT Logan Part No. F5017 F5017 F5019 F5019 F5023 F5023 F5024 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1016 F1017 F1018 F1019 F1022 F1023 F1024 Bowen No MANDREL EXTRA LENGTH Logan Part No. PER INCH (C & D) Bowen No. ACCESSORIES MILL TYPE NUT Logan Part No. F5017-A F5017-A F5019-A F5019-A F5023-A F5023-A F5024-A Bowen No A A 1335-A 1335-A 9719-A 9719-A 9269-A SUB TYPE NUT Logan Part No. F5017-B F5017-B F5019-B F5019-B F5023-B F5023-B F5024-B Bowen No B B 1335-B 1335-B 9719-B 9719-B 9269-B SIDE HILL NUT Logan Part No. F5017-C F5017-C F5019-C F5019-C F5023-C F5023-C F5024-C Bowen No C C 1335-C 1335-C 9719-C 9719-C 9269-C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 10

13 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D /8 8-5/8 9-5/8 9-5/8 13-3/8 SPEAR O.D. 5-3/4 7-1/4 7-1/4 8-1/4 8-1/4 11-3/4 SPEAR I.D /4 2-3/4 2-13/ /16 3-1/2 DUTY CLASS HD STD HD STD HD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No GRAPPLE * Logan Part No. F3026 F3029 F3030 F3032 F3034 F3035 Bowen No RELEASE RING Loagn Part No. F4024 F4029 F4029 F4032 F4032 F4033 Bowen No BULL NOSE NUT Logan Part No. F5024 F5029 F5029 F5032 F5032 F5033 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5024-A F5029-A F5029-A F5032-A F5032-A F5035-A Bowen No A 9384-A 9384-A 9284-A 9284-A A SUB TYPE NUT Logan Part No. F5024-B F5029-B F5029-B F5032-B F5032-B F5035-B Bowen No B 9384-B 9384-B 9284-B 9284-B B SIDE HILL NUT Logan Part No. F5024-C F5029-C F5029-C F5032-C F5032-C F5035-C Bowen No C 9384-C 9384-C 9284-C 9284-C C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 11 Standard Releasing Spear Manual B215

14 LOGAN STANDARD RELEASING SPEAR NOMINAL CATCH SIZE O.D /8 8-5/8 9-5/8 9-5/8 13-3/8 SPEAR O.D. 5-3/4 7-1/4 7-1/4 8-1/4 8-1/4 11-3/4 SPEAR I.D /4 2-3/4 2-13/ /16 3-1/2 DUTY CLASS HD STD HD STD HD STD COMPLETE ASSEMBLY Logan Part No Bowen No REPLACEMENT PARTS TOP SUB Logan Part No. Bowen No. MANDREL (FLUSH TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No GRAPPLE * Logan Part No. F3026 F3029 F3030 F3032 F3034 F3035 Bowen No RELEASE RING Loagn Part No. F4024 F4029 F4029 F4032 F4032 F4033 Bowen No BULL NOSE NUT Logan Part No. F5024 F5029 F5029 F5032 F5032 F5033 Bowen No OPTIONAL PARTS MANDREL (SHOULDER TYPE) Logan Part No. F1026 F1029 F1030 F1032 F1034 F1035 Bowen No MANDREL EXTRA LENGTH PER INCH (C & D) ACCESSORIES MILL TYPE NUT Logan Part No. F5024-A F5029-A F5029-A F5032-A F5032-A F5035-A Bowen No A 9384-A 9384-A 9284-A 9284-A A SUB TYPE NUT Logan Part No. F5024-B F5029-B F5029-B F5032-B F5032-B F5035-B Bowen No B 9384-B 9384-B 9284-B 9284-B B SIDE HILL NUT Logan Part No. F5024-C F5029-C F5029-C F5032-C F5032-C F5035-C Bowen No C 9384-C 9384-C 9284-C 9284-C C When ordering, please specify: (1) Name and part number of assembly or part (2) Size and type of top connection (3) Size and weight(s) of pipe to catch (4) Flush or Shoulder type (specify O.D. of shoulder, A ) (5) Mandrel length desired C (6) Thread size and type of nut, if wanted Recommended Spare Parts: (1) 2 Grapples for each catch size All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 11 Standard Releasing Spear Manual B215

15 LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY Retainer Ring Screw 4 required Retainer Ring Screw Spacer 4 required Segment Body Retainer Ring 2 required Grapple Segment Screw 16 required Grapple Segments 8 required LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY ASSEMBLES TO SPEAR Logan Part No Bowen No CATCH SIZE (PIPE SIZE) 10-3/4 11-3/4 12-3/4 13-3/8 10-3/4 11-3/4 12-3/4 13-3/8 PIPE WEIGHT COMPLETE ASSEMBLY Logan Part No Bowen No GRAPPLE BODY Logan Part No. F3029-A F3030-A Bowen No A A GRAPPLE SEGMENT Logan Part No. F3029-B F3030-B (8 per 1 set) Bowen No B B SEGMENT SCREW Logan Part No. T3000 T3000 Bowen No No. Req d RETAINER RING Logan Part No. T4000 T4000 Bowen No No. Req d 2 2 RETAINER RING SCREW Logan Part No. T5000 T5000 Bowen No No. Req d 4 4 RETAINER RING SCREW Logan Part No. T6000 T6000 SPACER Bowen No No. Req d 4 4 All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 13 Standard Releasing Spear Manual B215

16 LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY ASSEMBLES TO SPEAR Logan Part No Bowen No CATCH SIZE (PIPE SIZE) 13-3/ / / /8 20 PIPE WEIGHT COMPLETE ASSEMBLY Logan Part No Bowen No GRAPPLE BODY Logan Part No. F3032-A F3034-A Bowen No A A GRAPPLE SEGMENT Logan Part No. F3032-B F3034-B (8 per 1 set) Bowen No B B SEGMENT SCREW Logan Part No. T3001 T3001 Bowen No No. Req d RETAINER RING Logan Part No. T4001 T4001 Bowen No No. Req d 2 2 RETAINER RING SCREW Logan Part No. T5001 T5001 Bowen No No. Req d 4 4 RETAINER RING Logan Part No. T6000 T6000 SCREW SPACER Bowen No No. Req d 4 4 LOGAN SEGMENTED SPEAR GRAPPLE ASSEMBLY ASSEMBLES TO SPEAR Logan Part No Bowen No CATCH SIZE (PIPE SIZE) /8 20 PIPE WEIGHT COMPLETE ASSEMBLY Logan Part No Bowen No GRAPPLE BODY Logan Part No. F3035-A Bowen No A GRAPPLE SEGMENT Logan Part No. F3035-B (8 per 1 set) Bowen No B SEGMENT SCREW Logan Part No. T3002 Bowen No No. Req d 16 RETAINER RING Logan Part No. T4002 Bowen No No. Req d 2 RETAINER Logan Part No. T5002 RING SCREW Bowen No No. Req d 4 RETAINER RING Logan Part No. T6000 SCREW SPACER Bowen No No. Req d 4 All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 14

17 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3000 F3000 F3000 F3000 F3000 F3000 F3000 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3/4 ID & 3/4 Std Pipe.875 to.864 ID.937 ID.957 ID 3/4 X-STG.824 ID 1.0 to 2.25# 1" X-STG Pipe CS Hydril Pipe LOGAN SPEAR GRAPPLE Logan Part No. F3000 F3000 F3000 F3000 F3001 F3001 F3001 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES).982 ID 1" ID 1" Std Pipe 1-1/8 ID.957 ID 1" ID ID ID 1" X-STG Pipe 1" Std Pipe LOGAN SPEAR GRAPPLE Logan Part No. F3001 F3001 F3002 F3002 F3002 F3002 F3002 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) ID ID ID to to to to ID ID ID ID LOGAN SPEAR GRAPPLE Logan Part No. F3002 F3002 F3002 F3002 F3002 F3002 F3002 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-3/8 ID ID to 1-1/2 Std Pipe ID 1 9/16 ID to 1-1/4 Tbg ID & 1-5/8 ID ID LOGAN SPEAR GRAPPLE Logan Part No. F3002 F3002 F3002 F3002 F3002 F3002 F3004 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-3/4 to ID 1-7/8 to 1-15/16 ID 2 ID ID ID to 1-25/32 ID 1-29/32 1-1/2 X-STG Pipe Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 15 Standard Releasing Spear Manual B215

18 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3004 F3004 F3004 F3004 F3004 F3004 F3004 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-1/2 Std Pipe 1-5/8 ID ID ID 1-3/4 to ID ID LOGAN SPEAR GRAPPLE Logan Part No. Bowen No. Price LOGAN SPEAR GRAPPLE Logan Part No. F3004 F3004 F3004 F3004 F3004 F3005 F3005 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) ID ID 1-7/8 ID ID 2 ID to 2-3/8 Drill ID Pipe, 65.5# LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3005 F3005 F3005 F3008 F3008 F3008 F3008 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 1-7/8 & to 2-3/8 Tbg, ID ID to 2-3/8 Tbg, 1-27/32 ID ID 4 to 4.7# Turn Body Turn Body ID 4 to 4.7# Down Down LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 F3007 F3007 F3007 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3008 F3008 F3008 F3008 F3008 F3008 F3008 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) to 2-1/8 ID 2-7/8 DP, 2-1/4 to 2-17/64 ID 2-5/16 ID 2-7/8 OD ID 9.75 to 10.4# 2-3/16 ID 7.8 to 8.35# DP Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 16

19 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 F3007 F3007 F3007 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3008 F3008 F3008 F3008 F3008 F3008 F3008 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 2-3/8 ID NX 2-3/8 ID 2-7/8 Tbg 2-7/16 ID 2-5/8 ID & 2-5/8 ID & 2-3/4 ID 1/2 Rod 2-7/16 ID #, 2-1/2 ID 2-9/16 ID 2-11/16 ID 2-7/8 OD LOGAN SPEAR GRAPPLE Logan Part No. F3007 F3007 F3007 F3007 F3009 F3009 F3009 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3008 F3008 F3008 F3008 F3010 F3010 F3010 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3 ID & 3-1/16 ID 3-1/4 ID & 3-11/32 ID 2-3/8 ID 2-3/8 to 2-7/8 Tbg 2-15/16 ID & 3-1/8 ID 3-3/16 ID & 3-9/32 ID 2-7/16 ID #, - NX DRIVE 2-7/8 OD LOGAN SPEAR GRAPPLE Logan Part No. F3009 F3009 F3009 F3009 F3009 F3009 F3009 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3010 F3010 F3010 F3010 F3010 F3010 F3010 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) to 3-1/2 OD 2-11/16 3-1/2 OD 2-13/16 ID & 3-1/2 OD 2-7/8 to 2-15/32 ID 15.5# Drill 2-5/8 ID 12.4 to 13.3# 2-3/4 ID 10.2 to 11.2# 2-15/16 ID Pipe Drill Pipe Drill Pipe Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 17 Standard Releasing Spear Manual B215

20 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3009 F3009 F3009 F3009 F3009 F3009 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3010 F3010 F3010 F3010 F3010 F3010 F3012 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3-1/2 OD 3-1/2 OD 3-1/8 3-1/ to 3-1/2 ID 3-1/2 OD # Tbg 7.7# Tbg 3-1/16 ID 3-3/16 ID ID # Tbg LOGAN SPEAR GRAPPLE Logan Part No. Bowen No. LOGAN SPEAR GRAPPLE Logan Part No. F3012 F3012 F3012 F3012 F3012 F3012 F3012 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3-1/2 OD 3-1/8 ID 3-1/4 ID 4 OD 4 OD 4 OD to 7.7 to 9.2# 3-3/16 ID 12.5 to 14.0# 11.0 to 11.6# 9.5 to 11.0# ID Drill Pipe LOGAN SPEAR GRAPPLE Logan Part No. F3014 F3014 F3014 F3014 F3014 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3012 F3012 F3015 F3015 F3015 F3015 F3015 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 3-11/16 ID 3-3/4 ID 4 OD 4 OD 4 OD 3-5/8 ID & 4-1/2 OD 12.5 to 11.0 to 9.5 to 3-9/16 ID 18.1 to 14.0 Tbg 11.6# Tbg 11.0# Tbg 22.0# Tbg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 18

21 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3014 F3014 F3014 F3014 F3014 F3014 F3014 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3015 F3015 F3015 F3015 F3015 F3015 F3015 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 4-1/2 OD 4-1/2 OD 4-1/2 OD 4-1/2 OD 5 OD 5 OD 5 Tbg 15.3 to 13.7 to 11.0 to 9.5 to 18.0 to 17.7 to 12.6 to15.0# 18.1# Tbg 15.3# Tbg 13.7# Tbg 11.6# Tbg 21.0# Tbg 18.0# Tbg (4.408 ID) LOGAN SPEAR GRAPPLE Logan Part No. F3014 F3014 F3016 F3016 F3016 F3016 F3016 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3015 F3015 F3017 F3017 F3017 F3017 F3017 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 5 OD 5-1/2 OD 4-1/2 OD 4-1/2 OD 4-1/2 OD 4-1/2 OD 5 OD 11.5# Tbg 14.0 to 15.3 to 13.7 to 11.0 to 9.5 to 18.0 to 17.0# Tbg 18.1# Tbg 15.3# Tbg 13.7# Tbg 11.6# Csg 21.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3016 F3016 F3018 F3018 F3018 F3018 F3018 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3017 F3017 F3019 F3019 F3019 F3019 F3019 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD 5 OD, 8# 15.0 to 12.6 to 18.0 to 15.0 to 11.5 to 9.0 to 5-1/2 OD 18.0# Csg 15.0# Csg 21.0# Csg 18.0# Csg 15.0# Csg 13.0# Csg 23 to 25# Csg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 19 Standard Releasing Spear Manual B215

22 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3018 F3018 F3018 F3018 F3018 F3018 F3018 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3019 F3019 F3019 F3019 F3019 F3019 F3019 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 5 1/2 OD 5-1/2 OD 5-1/2 OD 5-3/4 OD 5-3/4, 5-3/4 OD 6 OD 20.0 to 17.0 to 14.0 to 19.5 to # 14.0 to 20.0# Csg to 23.0# Csg 20.0# Csg 17.0# Csg 22.5# Csg 5 1/2 OD 17.0 Csg 23.0# Csg 9.0 to 13.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3018 F3018 F3018 F3022 F3022 F3022 F3022 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3019 F3019 F3019 F3023 F3023 F3023 F3023 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 6 OD 6 OD 6-5/8 OD 6 OD 6 OD 6 OD 6 OD 17.0 to 14.0 to 32.0 to 23.0 to 20.0 to 17.0 to 14.0 to 20.0# Csg 17.0# Csg 34.0# Csg 26.0# Csg 23.0# Csg 20.0# Csg 17.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3022 F3022 F3022 F3022 F3022 F3022 F3022 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3023 F3023 F3023 F3023 F3023 F3023 F3023 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 6 OD 6-5/8 OD 6-5/8 OD 6-5/8 OD 7 OD 6-5/8 OD 7 OD 10.5 to 28.0 to 26.0 to 24.0 to 38.0 to 20.0 to 33.7 to 14.0# Csg 32.0# Csg 29.0# Csg 28.0# Csg 40.0# Csg 24.0# Csg 38.0# Csg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 20

23 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3022 F3022 F3022 F3022 F3022 F3022 F3024 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3023 F3023 F3023 F3023 F3023 F3023 F3026 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 6-5/8 OD 7 OD 7 OD 7 OD 7 OD 7 OD 7" # 17.0 to 29.0 to 26.0 to 22.0 to 20.0 to 17.0 to & 6-5/8 22.0# Csg 33.7# Csg 29.0# Csg 26.0# Csg 23.0# Csg 20.0# Csg 24.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3024 F3024 F3024 F3024 F3024 F3024 F3024 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3026 F3026 F3026 F3026 F3026 F3026 F3026 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 7 OD 7 OD 7 OD 7-5/8 OD 7-5/8 OD 7-5/8 OD 8-1/8 OD 26.0 to 22.0 to 13.0 to 33.7 to 26.4 to 14.7 to 32.0 to 35.0# Csg 33.7# Csg 24.0# Csg 45.0# Csg 39.0# Csg 26.4# Csg 42.0#Csg LOGAN SPEAR GRAPPLE Logan Part No. F3024 F3024 F3024 F3024 F3024 F3024 F3024 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3026 F3026 F3026 F3026 F3026 F3026 F3026 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 8 OD 7-9/16 ID 8-5/8 OD 8-5/ /8 OD 9 OD 9-5/8 OD 16.0 to 34.0 to 38.0#, 17.6 to 34.0 to 29.3 to 26.0# Csg 48.0# Csg 9" 55# Csg 29.3# Csg 45.0# Csg 42.0# Csg Note: Grapples are stenciled with nominal catch size. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 21 Standard Releasing Spear Manual B215

24 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No. F3024 F3029 F3029 F3029 F3029 F3029 F3029 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3026 F3030 F3030 F3030 F3030 F3030 F3030 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 9-5/8 OD 8-5/8 OD 8-5/ to 8-5/ to 9 OD 19.0# 9-5/8 OD 9-5/8 OD 43.5 to 36.0 to 38.0#, 9 OD 29.3#, 9 OD & 9-5/8 OD 40.0 to 29.3 to 53.5# Csg 48.0# Csg 45.0 to 34.0 to 43.5 to 53.5# Csg 42.0# Csg 55.0# Csg 45.0# Csg 58.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F * * * * * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * * * * * * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 10-3/4 OD 10-3/4 OD 10-3/4 OD 11-3/4 OD 11-3/4 OD 13-3/8 OD 13-3/8 OD 55.5 to 40.0 to 32.7 to 47.0 to 38.0 to 61.0 to 48.0 to 65.7# Csg 55.5# Csg 48.0# Csg 60.0# Csg 54.0# Csg 85.0# Csg 68.0# Csg LOGAN SPEAR GRAPPLE Logan Part No. F3032 F3032 F3032 F3032 F3032 F3032 F3032 Bowen No LOGAN SPEAR GRAPPLE Logan Part No. F3034 F3034 F3034 F3034 F3034 F3034 F3034 Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 9-5/8 OD 9-5/8 OD 9-5/8 OD 9-5/8 OD 10-3/4 OD 10-3/4 OD 10-3/4 OD 43.5 to 40.0 to 36.0 to 29.3 to 40.0 to 32.7 to 71.0 to 58.0# Csg 53.5# Csg 43.5# Csg 40.0# Csg 55.5# Csg 48.0# Csg 76.0# Csg Note: Grapples are stenciled with nominal catch size * Segmented grapples. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Manual B215 Standard Releasing Spear Page 22

25 LOGAN RELEASING SPEAR GRAPPLE RANGE CHART LOGAN SPEAR GRAPPLE Logan Part No * F3032 F3032 F3032 F * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * F3034 F3034 F3034 F * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 11.5 ID 11-3/4 OD 11-3/4 OD 11-3/4 OD 11-3/4 OD 13-3/8 OD 13-3/8 OD 54.0 to 38.0 to 60.0# Csg 47.0 to ID 96.0#, # Csg 54.0# Csg 60.0# Csg Csg ID Csg LOGAN SPEAR GRAPPLE Logan Part No * * * * * * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * * * * * * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 13-3/8 OD 13-3/8 OD 12-3/4 OD 14 OD to 13-5/8 ID 16 OD 72.0 to 48.0 to 12-3/4 ID 42.0 to ID 55.0 to 85.0# Csg 68.0# Csg 57.0# Csg 75.0# Csg LOGAN SPEAR GRAPPLE Logan Part No * * * * Bowen No LOGAN SPEAR GRAPPLE Logan Part No * * * * Bowen No MINIMUM ID NOMINAL CATCH SIZE MAXIMUM ID OLD NOMINAL SIZE (INCHES) 16 OD 17-1/2 ID 20 OD 18-5/8 OD 65.0 to 90.0 to 87.0# Csg 84.0# Csg 106.5# Csg Note: Grapples are stenciled with nominal catch size * Segmented grapples. All references to Bowen part numbers in this literature are used to identify interchangeable tools and parts. Reference to such tools and parts does not imply that Logan Oil Tools is a licensee or is in any way affiliated with National Oilwell Varco. Logan Oil Tools does not sell, or offer to sell, National Oilwell Varco (Bowen) products. Page 23 Standard Releasing Spear Manual B215