Simulation of RF HEat Test
|
|
- Hugh Fields
- 6 years ago
- Views:
Transcription
1 Simulation of RF HEat Test Date: Tuesday, December 22, 2015 Designer: Solidworks Study name: Stress One Third Emissivity Analysis type: Nonlinear - Dynamic Description No Data Table of Contents Description... 1 Assumptions... 2 Model Information... 2 Study Properties... 3 Units... 3 Material Properties... 4 Loads and Fixtures... 5 Connector Definitions... 6 Contact Information... 6 Mesh information... 7 Sensor Details... 8 Resultant Forces... 8 Beams... 9 Study Results Conclusion Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 1
2 Assumptions Model Information Solid Bodies Document Name and Reference Cut-Extrude1 Treated As Solid Body Model name: RF HEat Test Current Configuration: Default Volumetric Properties Mass: kg Volume: e-007 m^3 Density:8030 kg/m^3 Weight: N Document Path/Date Modified C:\Work\David\RF Load for ITER\RF HEat Test.SLDPRT Dec 22 08:35: Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 2
3 Study Properties Study name Analysis type Mesh type Start time End time Time increment Large displacement formulation: Update load direction with deflection: Large strain formulation: Save data for restarting the analysis Thermal Effect: Thermal option Stress One Third Emissivity Nonlinear - Dynamic Solid Mesh 0 Seconds 450 Seconds 0.03 Seconds On Off Off Off On From thermal study Input thermal study: Copy of [Trans Heat Time Step Time 0.01 Zero strain temperature Solver type Incompatible bonding options Control technique: Iterative technique: Integration Method Result folder e Kelvin Direct sparse solver Simplified Force NR(Newton-Raphson) Newmark SOLIDWORKS document (C:\Work\David\RF Load for ITER) Units Unit system: Length/Displacement Temperature Angular velocity Pressure/Stress SI (MKS) mm Celsius Rad/sec N/m^2 Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 3
4 Material Properties Model Reference Properties Components Curve Data:N/A Name: 304L SST Model type: Linear Elastic Isotropic Default failure Unknown criterion: Yield strength: e+008 N/m^2 Tensile strength: e+008 N/m^2 Elastic modulus: 1.9e+011 N/m^2 Poisson's ratio: 0.29 Mass density: 8030 kg/m^3 Shear modulus: 7.5e+010 N/m^2 Thermal expansion 1.8e-005 /Kelvin coefficient: SolidBody 1(Cut-Extrude1)(RF HEat Test) Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 4
5 Loads and Fixtures Fixture name Fixture Image Fixture Details Reference Geometry-1 Entities: 1 face(s) Reference: Edge< 1 > Type: Use reference geometry Translation: ---, ---, 0 Units: mm Resultant Forces Components X Y Z Resultant Reaction force(n) Reaction Moment(N.m) Reference Geometry-2 Entities: 1 face(s) Reference: Edge< 1 > Type: Use reference geometry Translation: ---, ---, 0 Units: mm Resultant Forces Components X Y Z Resultant Reaction force(n) Reaction Moment(N.m) Entities: Type: 1 face(s) Symmetry Symmetry-1 Resultant Forces Components X Y Z Resultant Reaction force(n) Reaction Moment(N.m) Load name Load Image Load Details Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 5
6 Pressure-1 Entities: 4 face(s) Type: Normal to selected face Value: 150 Units: psi Phase Angle: 0 Units: deg Connector Definitions No Data Contact Information No Data Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 6
7 Mesh information Mesh type Mesher Used: Automatic Transition: Include Mesh Auto Loops: Jacobian points Element Size Tolerance Mesh Quality Solid Mesh Standard mesh On Off 4 Points in in High Mesh information - Details Total Nodes Total Elements 6766 Maximum Aspect Ratio % of elements with Aspect Ratio < % of elements with Aspect Ratio > 10 0 % of distorted elements(jacobian) 0 Time to complete mesh(hh;mm;ss): 00:00:01 Computer name: DAVID-PC Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 7
8 Sensor Details No Data Resultant Forces Reaction forces Selection set Units Sum X Sum Y Sum Z Resultant Entire Model N Reaction Moments Selection set Units Sum X Sum Y Sum Z Resultant Entire Model N.m Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 8
9 Beams No Data Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 9
10 Study Results Name Type Min Max Stress1 VON: von Mises Stress at Step No: N/m^ e+008 N/m^2 3667( Seconds) Node: Node: 7743 RF HEat Test-Stress One Third Emissivity-Stress-Stress1 Name Type Min Max Displacement1 URES: Resultant Displacement e+011 mm e+011 mm at Step No: 15000(450 Seconds) Node: 1 Node: 1 Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 10
11 RF HEat Test-Stress One Third Emissivity-Displacement-Displacement1 Name Type Min Max Strain1 ESTRN: Equivalent Strain at Step e No: 100(3 Seconds) Element: 2177 Element: 3079 Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 11
12 RF HEat Test-Stress One Third Emissivity-Strain-Strain1 Conclusion Analyzed with SOLIDWORKS Simulation Simulation of RF HEat Test 12
Simulation of Connector Assembly AA
Simulation of Connector Assembly AA Date: Tuesday, March 1, 2016 Designer: Solidworks Study name: Horizontal Stress in AA inner tab fold Analysis type: Static Table of Contents Model Information... 2 Study
More informationSimulation of Connector Assembly C
Simulation of Connector Assembly C Date: Sunday, March 6, 2016 Designer: Solidworks Study name: Horizontal Stress Test on C inner bend Analysis type: Static Table of Contents Model Information... 2 Study
More informationSimulation of AJWSP10033_FOLDED _ST_FR
Phone: 01922 453038 www.hyperon-simulation-and-cad-services.co.uk Simulation of AJWSP10033_FOLDED _ST_FR Date: 06 May 2017 Designer: Study name: AJWSP10033_FOLDED_STATIC Analysis type: Static Description
More informationSimulation of TEST DAVIT
Phone: 616-834-4175 WWW.SKYLINEFP.COM Simulation of TEST DAVIT Date: Friday, February 19, 2016 Designer: Study name: Study 1 Analysis type: Static Description No Data Table of Contents Description... 1
More informationSeparation Connector. Analysis of Final Design Concepts Document
Separation Connector By Koll Christianson, Amelia Fuller, Luis Herrera, Zheng Lian, and Shaun Shultz Team 19 Analysis of Final Design Concepts Document Submitted towards partial fulfillment of the requirements
More informationCrane Hook Design and Analysis
Crane Hook Design and Analysis G Bhagyaraj 1, K Suryaprakash 2, K Subba Rao 3 1M.Tech. CAD/CAM, Godavari Institute of Engineering and Technology, Rajahmundry 2Associate Professor, Godavari Institute of
More informationSimulation of Fully extended LM-14-8-FM- 500LB tests
LLC www.larsonelectronics.com sales@larsonelectronics.com 9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364 Simulation of Fully extended LM-14-8-FM- 500LB tests Date: Friday, November
More informationCHAPTER 4. Numerical Models. descriptions of the boundary conditions, element types, validation, and the force
CHAPTER 4 Numerical Models This chapter presents the development of numerical models for sandwich beams/plates subjected to four-point bending and the hydromat test system. Detailed descriptions of the
More information2: Static analysis of a plate
2: Static analysis of a plate Topics covered Project description Using SolidWorks Simulation interface Linear static analysis with solid elements Finding reaction forces Controlling discretization errors
More informationMulti-Step Analysis of a Cantilever Beam
LESSON 4 Multi-Step Analysis of a Cantilever Beam LEGEND 75000. 50000. 25000. 0. -25000. -50000. -75000. 0. 3.50 7.00 10.5 14.0 17.5 21.0 Objectives: Demonstrate multi-step analysis set up in MSC/Advanced_FEA.
More informationSimilar Pulley Wheel Description J.E. Akin, Rice University
Similar Pulley Wheel Description J.E. Akin, Rice University The SolidWorks simulation tutorial on the analysis of an assembly suggested noting another type of boundary condition that is not illustrated
More informationSolidWorks. An Overview of SolidWorks and Its Associated Analysis Programs
An Overview of SolidWorks and Its Associated Analysis Programs prepared by Prof. D. Xue University of Calgary SolidWorks - a solid modeling CAD tool. COSMOSWorks - a design analysis system fully integrated
More informationAnalysis of ANSI W W 6x9-118,
Page 1 of 8 Analysis of ANSI W W 6x9-118,110236220472 Author: Analysis Created: Analysis Last Modified: Report Created: Introduction Administrator, 08:29:09, 08:29:09 09:26:02 Database: Z:\ENGENHARIA\ESTUDOS
More information3D SolidWorks Tutorial
ROCHESTER INSTITUTE OF TECHNOLOGY MICROELECTRONIC ENGINEERING 3D SolidWorks Tutorial Dr. Lynn Fuller webpage: http://people.rit.edu/lffeee Electrical and Microelectronic Engineering Rochester Institute
More informationRevision of the SolidWorks Variable Pressure Simulation Tutorial J.E. Akin, Rice University, Mechanical Engineering. Introduction
Revision of the SolidWorks Variable Pressure Simulation Tutorial J.E. Akin, Rice University, Mechanical Engineering Introduction A SolidWorks simulation tutorial is just intended to illustrate where to
More informationWorkshop 15. Single Pass Rolling of a Thick Plate
Introduction Workshop 15 Single Pass Rolling of a Thick Plate Rolling is a basic manufacturing technique used to transform preformed shapes into a form suitable for further processing. The rolling process
More informationEngineering Effects of Boundary Conditions (Fixtures and Temperatures) J.E. Akin, Rice University, Mechanical Engineering
Engineering Effects of Boundary Conditions (Fixtures and Temperatures) J.E. Akin, Rice University, Mechanical Engineering Here SolidWorks stress simulation tutorials will be re-visited to show how they
More informationLearning Module 8 Shape Optimization
Learning Module 8 Shape Optimization What is a Learning Module? Title Page Guide A Learning Module (LM) is a structured, concise, and self-sufficient learning resource. An LM provides the learner with
More informationSliding Split Tube Telescope
LESSON 15 Sliding Split Tube Telescope Objectives: Shell-to-shell contact -accounting for shell thickness. Creating boundary conditions and loads by way of rigid surfaces. Simulate large displacements,
More informationNumerical Behavior Reproduction of a Truss Structure and Beam, Subjected to Concentrated Load
ANALELE UNIVERSITĂłII EFTIMIE MURGU REŞIłA ANUL XVII, NR. 2, 2010, ISSN 1453-7397 Nedelcu Dorian, Ianici Draghita, Nedeloni Marian, Daia Daniel Numerical Behavior Reproduction of a Truss Structure and
More informationExercise 1. 3-Point Bending Using the Static Structural Module of. Ansys Workbench 14.0
Exercise 1 3-Point Bending Using the Static Structural Module of Contents Ansys Workbench 14.0 Learn how to...1 Given...2 Questions...2 Taking advantage of symmetries...2 A. Getting started...3 A.1 Choose
More informationChapter 5 Modeling and Simulation of Mechanism
Chapter 5 Modeling and Simulation of Mechanism In the present study, KED analysis of four bar planar mechanism using MATLAB program and ANSYS software has been carried out. The analysis has also been carried
More informationRevised Sheet Metal Simulation, J.E. Akin, Rice University
Revised Sheet Metal Simulation, J.E. Akin, Rice University A SolidWorks simulation tutorial is just intended to illustrate where to find various icons that you would need in a real engineering analysis.
More informationANSYS Workbench Guide
ANSYS Workbench Guide Introduction This document serves as a step-by-step guide for conducting a Finite Element Analysis (FEA) using ANSYS Workbench. It will cover the use of the simulation package through
More informationModule 1.3W Distributed Loading of a 1D Cantilever Beam
Module 1.3W Distributed Loading of a 1D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Workbench Analysis System 4 Engineering Data 5 Geometry 6 Model 11 Setup 13 Solution
More informationSOLIDWORKS Simulation Avoiding Singularities
SOLIDWORKS Simulation Avoiding Singularities What is a Singularity? A singularity is a function s divergence into infinity. SOLIDWORKS Simulation occasionally produces stress (or heat flux) singularities.
More informationEngineering Analysis with
Engineering Analysis with SolidWorks Simulation 2013 Paul M. Kurowski SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationEngineering Analysis with SolidWorks Simulation 2012
Engineering Analysis with SolidWorks Simulation 2012 Paul M. Kurowski SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites
More informationFully-Coupled Thermo-Mechanical Analysis
Fully-Coupled Thermo-Mechanical Analysis Type of solver: ABAQUS CAE/Standard Adapted from: ABAQUS Example Problems Manual Extrusion of a Cylindrical Aluminium Bar with Frictional Heat Generation Problem
More informationSolid and shell elements
Solid and shell elements Theodore Sussman, Ph.D. ADINA R&D, Inc, 2016 1 Overview 2D and 3D solid elements Types of elements Effects of element distortions Incompatible modes elements u/p elements for incompressible
More informationCoupled Analysis of FSI
Coupled Analysis of FSI Qin Yin Fan Oct. 11, 2008 Important Key Words Fluid Structure Interface = FSI Computational Fluid Dynamics = CFD Pressure Displacement Analysis = PDA Thermal Stress Analysis = TSA
More informationThis lab uses the following skills: Fixtures on page 34. External Loads on page 38. Meshing on page 43. Multiple Studies on page 60.
Exercise 1 Exercise 1: n this first exercise, you will analyze a simple part with a single restraint and one external force. This lab uses the following skills: Fixtures on page 34. External Loads on page
More informationME Optimization of a Frame
ME 475 - Optimization of a Frame Analysis Problem Statement: The following problem will be analyzed using Abaqus. 4 7 7 5,000 N 5,000 N 0,000 N 6 6 4 3 5 5 4 4 3 3 Figure. Full frame geometry and loading
More informationThe part to be analyzed is the bracket from the tutorial of Chapter 3.
Introduction to Solid Modeling Using SolidWorks 2007 COSMOSWorks Tutorial Page 1 In this tutorial, we will use the COSMOSWorks finite element analysis (FEA) program to analyze the response of a component
More informationCOMPUTER AIDED ENGINEERING. Part-1
COMPUTER AIDED ENGINEERING Course no. 7962 Finite Element Modelling and Simulation Finite Element Modelling and Simulation Part-1 Modeling & Simulation System A system exists and operates in time and space.
More informationSDC. Engineering Analysis with COSMOSWorks. Paul M. Kurowski Ph.D., P.Eng. SolidWorks 2003 / COSMOSWorks 2003
Engineering Analysis with COSMOSWorks SolidWorks 2003 / COSMOSWorks 2003 Paul M. Kurowski Ph.D., P.Eng. SDC PUBLICATIONS Design Generator, Inc. Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationFinite Element Analysis Using NEi Nastran
Appendix B Finite Element Analysis Using NEi Nastran B.1 INTRODUCTION NEi Nastran is engineering analysis and simulation software developed by Noran Engineering, Inc. NEi Nastran is a general purpose finite
More informationEnhancing Productivity of a Roller Stand through Design Optimization using Manufacturing Simulation
Enhancing Productivity of a Roller Stand through Design Optimization using Manufacturing Simulation B.R. Krishna Tej 1, N.Sasank Sai 1 and S.Deepak kumar* 1 Engineering Design and Research Center (EDRC)
More informationChapter 3 Analysis of Original Steel Post
Chapter 3. Analysis of original steel post 35 Chapter 3 Analysis of Original Steel Post This type of post is a real functioning structure. It is in service throughout the rail network of Spain as part
More informationLinear and Nonlinear Analysis of a Cantilever Beam
LESSON 1 Linear and Nonlinear Analysis of a Cantilever Beam P L Objectives: Create a beam database to be used for the specified subsequent exercises. Compare small vs. large displacement analysis. Linear
More informationExample 24 Spring-back
Example 24 Spring-back Summary The spring-back simulation of sheet metal bent into a hat-shape is studied. The problem is one of the famous tests from the Numisheet 93. As spring-back is generally a quasi-static
More informationGenerative Part Structural Analysis Fundamentals
CATIA V5 Training Foils Generative Part Structural Analysis Fundamentals Version 5 Release 19 September 2008 EDU_CAT_EN_GPF_FI_V5R19 About this course Objectives of the course Upon completion of this course
More informationModule 1.7W: Point Loading of a 3D Cantilever Beam
Module 1.7W: Point Loading of a 3D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Workbench Analysis System 4 Engineering Data 5 Geometry 6 Model 11 Setup 13 Solution 14 Results
More informationPTC Creo Simulate. Features and Specifications. Data Sheet
PTC Creo Simulate PTC Creo Simulate gives designers and engineers the power to evaluate structural and thermal product performance on your digital model before resorting to costly, time-consuming physical
More informationCAD - How Computer Can Aid Design?
CAD - How Computer Can Aid Design? Automating Drawing Generation Creating an Accurate 3D Model to Better Represent the Design and Allowing Easy Design Improvements Evaluating How Good is the Design and
More informationLateral Loading of Suction Pile in 3D
Lateral Loading of Suction Pile in 3D Buoy Chain Sea Bed Suction Pile Integrated Solver Optimized for the next generation 64-bit platform Finite Element Solutions for Geotechnical Engineering 00 Overview
More informationExample of 3D Injection Molding CAE Directly Connected with 3D CAD
3D TIMON Example of 3D Injection Molding CAE Directly Connected with 3D CAD 1 Background Problem of Data Translation from 3D CAD to CAE 3D TIMON Difficulty to Generate mesh Automatically Topologically
More informationMSC/PATRAN LAMINATE MODELER COURSE PAT 325 Workbook
MSC/PATRAN LAMINATE MODELER COURSE PAT 325 Workbook P3*V8.0*Z*Z*Z*SM-PAT325-WBK - 1 - - 2 - Table of Contents Page 1 Composite Model of Loaded Flat Plate 2 Failure Criteria for Flat Plate 3 Making Plies
More informationStructural re-design of engine components
Structural re-design of engine components Product design cycle Design Development Testing Structural optimization Product knowledge Design freedom 2/18 Structural re-design of engine components Product
More informationExercise 1. 3-Point Bending Using the GUI and the Bottom-up-Method
Exercise 1 3-Point Bending Using the GUI and the Bottom-up-Method Contents Learn how to... 1 Given... 2 Questions... 2 Taking advantage of symmetries... 2 A. Preprocessor (Setting up the Model)... 3 A.1
More informationME 435 Spring Project Design and Management II. Old Dominion University Department of Mechanical Engineering. Standard Dynamics Model
ME 435 Spring 2011 Project Design and Management II Old Dominion University Department of Mechanical Engineering Standard Dynamics Model William Lawrence Andrew Snead TJ Wignall 15 March 2011 Abstract
More informationCoupled analysis of material flow and die deflection in direct aluminum extrusion
Coupled analysis of material flow and die deflection in direct aluminum extrusion W. Assaad and H.J.M.Geijselaers Materials innovation institute, The Netherlands w.assaad@m2i.nl Faculty of Engineering
More informationModule 1.6: Distributed Loading of a 2D Cantilever Beam
Module 1.6: Distributed Loading of a 2D Cantilever Beam Table of Contents Page Number Problem Description 2 Theory 2 Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing
More informationSOLIDWORKS Simulation: Material Model Types Defined
SOLIDWORKS Simulation: Material Model Types Defined In SOLIDWORKS Simulation Premium there are 11 material model types which will influence the results of a Linear or Nonlinear Analysis. These models types
More informationNUMERICAL STATIC ANALYSES OF PANELAIR FILTER PROTOTYPE UDC :311:
FACTA UNIVERSITATIS Series: Working and Living Environmental Protection Vol. 11, N o 1, 2014, pp. 23-33 NUMERICAL STATIC ANALYSES OF PANELAIR FILTER PROTOTYPE UDC 519.872:311:697.942 Miomir Raos, Ljiljana
More informationPressure Vessel Engineering Ltd. ASME Calculations - CRN Assistance - Vessel Design - Finite Element Analysis
PVEng Pressure Vessel Engineering Ltd. ASME Calculations - CRN Assistance - Vessel Design - Finite Element Analysis Design Conditions Code: ASME VIII-1 Year: 2007 Finite Element Analysis Report - VIII-1
More informationTHERMAL EXPANSION OF A NAVIGABLE LOCK
THERMAL EXPANSION OF A NAVIGABLE LOCK 15 THERMAL EXPANSION OF A NAVIGABLE LOCK A navigable lock is temporarily 'empty' due to maintenance. After some time there is significant increase of the air temperature,
More informationES 128: Computer Assignment #4. Due in class on Monday, 12 April 2010
ES 128: Computer Assignment #4 Due in class on Monday, 12 April 2010 Task 1. Study an elastic-plastic indentation problem. This problem combines plasticity with contact mechanics and has many rich aspects.
More informationBy Juan Gabriel Glaría Abril Tutor: Dr. Inz. Krzysztof Michalczyk
DESIGN, ANALYSIS AND OPTIMIZATION OF AN ORANGE PEEL GRAPPLE By Juan Gabriel Glaría Abril Tutor: Dr. Inz. Krzysztof Michalczyk DATE AND SIGNATURE KRAKÓW, 02/07/2013 THESIS DEVELOPER S SIGNATURE: JUAN GABRIEL
More informationCHAPTER 4 INCREASING SPUR GEAR TOOTH STRENGTH BY PROFILE MODIFICATION
68 CHAPTER 4 INCREASING SPUR GEAR TOOTH STRENGTH BY PROFILE MODIFICATION 4.1 INTRODUCTION There is a demand for the gears with higher load carrying capacity and increased fatigue life. Researchers in the
More informationModule 1.2: Moment of a 1D Cantilever Beam
Module 1.: Moment of a 1D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry Preprocessor 6 Element Type 6 Real Constants and Material Properties 7 Meshing 9 Loads 10 Solution
More informationNonLinear Materials AH-ALBERTA Web:
NonLinear Materials Introduction This tutorial was completed using ANSYS 7.0 The purpose of the tutorial is to describe how to include material nonlinearities in an ANSYS model. For instance, the case
More informationC-clamp FEA Analysis
C-clamp FEA Analysis ME 341 students are asked to determine the stresses on the inner and outer surface of a C-clamp at a point on the curved section and the straight section of the clamp. The following
More informationCase Study- Importing As-Molded Plastic Part Conditions into CAE tools
1 IEI Innova Engineering 1 Park Plaza Suite 980 Irvine, California 92614 Case Study- Importing As-Molded Plastic Part Conditions into CAE tools 2 CONTENTS CONTENTS... 2 EXECUTIVE SUMMARY... 3 APPROACH...
More informationAufgabe 1: Dreipunktbiegung mit ANSYS Workbench
Aufgabe 1: Dreipunktbiegung mit ANSYS Workbench Contents Beam under 3-Pt Bending [Balken unter 3-Pkt-Biegung]... 2 Taking advantage of symmetries... 3 Starting and Configuring ANSYS Workbench... 4 A. Pre-Processing:
More informationmidas FEA V320 Table of Contents
midas FEA V320 New Feature 01 CFD Moving Mesh Pre Process 01 File Open > File Preview 02 Extract Surface 03 Frame to Solid > Import 04 Tetra Auto mesh generation 05 Mesh options 06 Auto mesh Solid Function
More informationCrashbox Tutorial. In this tutorial the focus is on modeling a Formula Student Racecar Crashbox with HyperCrash 12.0
Crashbox Tutorial In this tutorial the focus is on modeling a Formula Student Racecar Crashbox with HyperCrash 12.0 (Written by Moritz Guenther, student at Altair Engineering GmbH) 1 HyperMesh* 1. Start
More informationSTATIC ANALYSIS TO REDESIGN THE GRIPPER, USING CREO PARAMETRIC SOFTWARE TOOLS
STATIC ANALYSIS TO REDESIGN THE GRIPPER, USING CREO PARAMETRIC SOFTWARE TOOLS Cristian VILAU 1, Nicolae BALC 1, Dan LEORDEAN 1, Cosmin COSMA 1 ABSTRACT: Within this paper is presented the optimizing activity
More informationQuarter Symmetry Tank Stress (Draft 4 Oct 24 06)
Quarter Symmetry Tank Stress (Draft 4 Oct 24 06) Introduction You need to carry out the stress analysis of an outdoor water tank. Since it has quarter symmetry you start by building only one-fourth of
More informationPlane strain conditions, 20 mm thick. b a. Material properties: E aa= N/mm2 Interface properties: G IC=0.28 N/mm E =E 00 N/mm2.
Problem description The figure shows a double cantilever beam (DCB) of a composite material, subjected to displacement loads at its ends. u All lengths in mm. Not drawn to scale. Plane strain conditions,
More informationExercise 1: 3-Pt Bending using ANSYS Workbench
Exercise 1: 3-Pt Bending using ANSYS Workbench Contents Starting and Configuring ANSYS Workbench... 2 1. Starting Windows on the MAC... 2 2. Login into Windows... 2 3. Start ANSYS Workbench... 2 4. Configuring
More informationAnalysis Steps 1. Start Abaqus and choose to create a new model database
Source: Online tutorials for ABAQUS Problem Description The two dimensional bridge structure, which consists of steel T sections (b=0.25, h=0.25, I=0.125, t f =t w =0.05), is simply supported at its lower
More information3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation
3-D Numerical Simulation of Direct Aluminum Extrusion and Die Deformation ABSTRACT W.A.Assaad, University of Twente Enschede, The Netherlands H.J.M. Geijselaers, University of Twente Enschede, The Netherlands
More informationANALYSIS AND OPTIMIZATION OF FLYWHEEL
Int. J. Mech. Eng. & Rob. Res. 2012 Sushama G Bawane et al., 2012 Research Paper ISSN 2278 0149 www.ijmerr.com Vol. 1, No. 2, July 2012 2012 IJMERR. All Rights Reserved ANALYSIS AND OPTIMIZATION OF FLYWHEEL
More informationANSYS 5.6 Tutorials Lecture # 2 - Static Structural Analysis
R50 ANSYS 5.6 Tutorials Lecture # 2 - Static Structural Analysis Example 1 Static Analysis of a Bracket 1. Problem Description: The objective of the problem is to demonstrate the basic ANSYS procedures
More informationRecent Advances on Higher Order 27-node Hexahedral Element in LS-DYNA
14 th International LS-DYNA Users Conference Session: Simulation Recent Advances on Higher Order 27-node Hexahedral Element in LS-DYNA Hailong Teng Livermore Software Technology Corp. Abstract This paper
More informationmidas NFX 2017R1 Release Note
Total Solution for True Analysis-driven Design midas NFX 2017R1 Release Note 1 midas NFX R E L E A S E N O T E 2 0 1 7 R 1 Major Improvements Midas NFX is an integrated finite element analysis program
More informationTop Layer Subframe and Node Analysis
Top Layer Subframe and Node Analysis By Paul Rasmussen 2 August, 2012 Introduction The top layer of the CCAT backing structure forms a critical interface between the truss and the primary subframes. Ideally
More informationIntroduction and Overview Extracting the input file Loading the input file into FLOW-3D Cast v
Contents Introduction and Overview... 2 Extracting the input file... 2 Loading the input file into FLOW-3D Cast v4.0... 3 Assigning definitions to geometry... 3 Required conversions... 4 Meshing and Geometry...
More informationFINITE ELEMENT ANALYSIS AND DYNAMIC ANALYSIS OF THE OUTER BEARING BUSH FROM THE BLADE ADJUSTMENT MECHANISM OF KAPLAN TURBINES
The 4th International Conference Computational Mechanics and Virtual Engineering COMEC 2011 20-22 OCTOBER 2011, Brasov, Romania FINITE ELEMENT ANALYSIS AND DYNAMIC ANALYSIS OF THE OUTER BEARING BUSH FROM
More informationNEW WAVE OF CAD SYSTEMS AND ITS APPLICATION IN DESIGN
Vol 4 No 3 NEW WAVE OF CAD SYSTEMS AND ITS APPLICATION IN DESIGN Ass Lecturer Mahmoud A Hassan Al-Qadisiyah University College of Engineering hasaaneng@yahoocom ABSTRACT This paper provides some lighting
More informationIntroduction to 2 nd -order Lagrangian Element in LS-DYNA
Introduction to 2 nd -order Lagrangian Element in LS-DYNA Hailong Teng Livermore Software Technology Corporation Nov, 2017 Motivation Users are requesting higher order elements for implicit. Replace shells.
More informationReinforced concrete beam under static load: simulation of an experimental test
Reinforced concrete beam under static load: simulation of an experimental test analys: nonlin physic. constr: suppor. elemen: bar cl12i cl3cm compos cq16m interf pstres reinfo struct. load: deform weight.
More informationEN1740 Computer Aided Visualization and Design Spring /26/2012 Brian C. P. Burke
EN1740 Computer Aided Visualization and Design Spring 2012 4/26/2012 Brian C. P. Burke Last time: More motion analysis with Pro/E Tonight: Introduction to external analysis products ABAQUS External Analysis
More informationProblem description. Problem 65: Free convection in a lightbulb. Filament (Tungsten): Globe (Glass): = FSI boundary. Gas (Argon):
Problem description This tutorial demonstrates the use of ADINA for analyzing the fluid flow and heat transfer in a lightbulb using the Thermal Fluid-Structure Interaction (TFSI) features of ADINA. The
More informationAdvanced Professional Training
Advanced Professional Training Non Linea rand Stability All information in this document is subject to modification without prior notice. No part of this manual may be reproduced, stored in a database
More informationA Locking-free Smoothed Finite Element Formulation (Modified Selective FS/NS-FEM-T4) with Tetrahedral Mesh Rezoning for Large Deformation Problems
A Locking-free Smoothed Finite Element Formulation (Modified Selective FS/NS-FEM-T4) with Tetrahedral Mesh Rezoning for Large Deformation Problems Yuki ONISHI, Kenji AMAYA Tokyo Institute of Technology
More informationA pipe bend is subjected to a concentrated force as shown: y All dimensions in inches. Material is stainless steel.
Problem description A pipe bend is subjected to a concentrated force as shown: y 15 12 P 9 Displacement gauge Cross-section: 0.432 18 x 6.625 All dimensions in inches. Material is stainless steel. E =
More informationModule 1.5: Moment Loading of a 2D Cantilever Beam
Module 1.5: Moment Loading of a D Cantilever Beam Table of Contents Page Number Problem Description Theory Geometry 4 Preprocessor 7 Element Type 7 Real Constants and Material Properties 8 Meshing 9 Loads
More informationGetting Quality Results with Your Simulation
Getting Quality Results with Your Simulation Brandon Adkins Application Engineer, CSWE Quest Integration Agenda SOLIDWORKS Simulation Determining the Proper Toolset Common issues and experiences Setting
More informationStress analysis of toroidal shell
Stress analysis of toroidal shell Cristian PURDEL*, Marcel STERE** *Corresponding author Department of Aerospace Structures INCAS - National Institute for Aerospace Research Elie Carafoli Bdul Iuliu Maniu
More informationstudying of the prying action effect in steel connection
studying of the prying action effect in steel connection Saeed Faraji Graduate Student, Department of Civil Engineering, Islamic Azad University, Ahar Branch S-faraji@iau-ahar.ac.ir Paper Reference Number:
More informationThe Essence of Result Post- Processing
APPENDIX E The Essence of Result Post- Processing Objectives: Manually create the geometry for the tension coupon using the given dimensions then apply finite elements. Manually define material and element
More informationCoupled Structural/Thermal Analysis
Coupled Structural/Thermal Analysis Introduction This tutorial was completed using ANSYS 7.0 The purpose of this tutorial is to outline a simple coupled thermal/structural analysis. A steel link, with
More informationCourse in ANSYS. Example0303. ANSYS Computational Mechanics, AAU, Esbjerg
Course in Example0303 Example Gear axle 3D Objective: Compute the maximum stress von Mise Tasks: How should this be modeled? Topics: Element type, Real constants, modeling, Plot results, output graphics,
More informationAn Overview of Computer Aided Design and Finite Element Analysis
An Overview of Computer Aided Design and Finite Element Analysis by James Doane, PhD, PE Contents 1.0 Course Overview... 4 2.0 General Concepts... 4 2.1 What is Computer Aided Design... 4 2.1.1 2D verses
More informationModeling and Analysis of Honeycomb Impact Attenuator
Modeling and Analysis of Honeycomb Impact Attenuator Preprocessor : Altair HyperMesh 14.0 Solver : Altair RADIOSS Postprocessor : Altair HyperView 1 An impact attenuator is a structure used to decelerate
More informationGuidelines for proper use of Plate elements
Guidelines for proper use of Plate elements In structural analysis using finite element method, the analysis model is created by dividing the entire structure into finite elements. This procedure is known
More informationDEVELOPMENT OF LEG WHEEL HYBRID HEXAPOD BOT
DEVELOPMENT OF LEG WHEEL HYBRID HEXAPOD BOT Sai Srinivas Nallamothu, Sai Preetham Sata, P. Sateesh Kumar Reddy, B. Jaswanth Babu ABSTRACT The conventional mobile robotic platforms which either uses wheels
More informationModelling Flat Spring Performance Using FEA
Modelling Flat Spring Performance Using FEA Blessing O Fatola, Patrick Keogh and Ben Hicks Department of Mechanical Engineering, University of Corresponding author bf223@bath.ac.uk Abstract. This paper
More information