Math 7, Unit 8: Geometric Figures Notes

Size: px
Start display at page:

Download "Math 7, Unit 8: Geometric Figures Notes"

Transcription

1 Math 7, Unit 8: Geometric Figures Notes Points, Lines and Planes; Line Segments and Rays s we begin any new topic, we have to familiarize ourselves with the language and notation to be successful. My guess is that you might already be pretty familiar with many of the terms about to be introduced in this section; the biggest difference is that we will formalize our understanding and introduce notation that will enable us to express that knowledge quickly. Let s look at one of our first elements in geometry, a point. point is pictured by a dot. While a dot must have some size, the point it represents has no size. Points are named by capital letters. P This point would be read point P. line extends indefinitely. line, containing infinitely many points, is considered to be a set of points, hence it has no thickness. line can be named by a lower case letter or by two points contained in the line. R S k This line could be called line k or RS, read line RS. Note that RS does not begin or end at either of the points R or S. plane is a flat surface. Such things as table tops, desks, windowpanes, and walls suggest planes. plane, like the aforementioned, does not have thickness and extends indefinitely. C B plane is named by 3 points that are on the plane (but not on the same line called noncollinear points). This plane could be called plane BC, or plane CB or plane CB. line segment contains two endpoints and all the points between those endpoints. B line segment is named by its endpoints. The above example could be read line segment B or B, which is also read line segment B. ray, denoted by XY, has one endpoint from that endpoint, the ray extends without end (in one direction). Note that the endpoint is named first, telling you that in this case the ray begins at point X and passes through point Y. Math 7 Notes Unit 8: Geometric Figures Page 1 of 16

2 This could be called ray XY and shown by XY. Y X We will need to have a system for identifying line segments that have the same length. Line segments are congruent if they have the same length. Two figures are congruent if they have the same shape and size. We use the symbol to mean is congruent to. We will use tick marks to indicate congruent line segments. In the rectangle shown, line segment WX and line segment YZ are congruent; line segment WZ is congruent to line segment XY. WX YZ WZ XY W X Z Y ngles: Measuring and Classifying n angle can be seen as a rotation of a line about a fixed point. In other words, if I were to mark a point on a paper, then rotate a pencil around that point, I would be forming angles. One complete rotation measures 360º. Half a rotation would then measure 180º. quarter rotation would measure 90º. Let s use a more formal definition. n angle is formed by the union of two rays with a common endpoint, called the vertex. ngles can be named by the vertex. V This angle would be called angle V, shown as V. However, the best way to describe an angle is with 3 points: one point on each ray and the vertex. When naming an angle, the vertex point is always in the middle. S N U This angle can now be named three different ways: SUN, NUS, or U. Math 7 Notes Unit 8: Geometric Figures Page 2 of 16

3 ngles are measured in degrees ( ). Protractors are used to measure angles. Here are two interactive websites you might use to show students how to use this measuring tool. You can classify an angle by its measure. cute angles are greater than 0, but less than 90º. In other words, not quite a quarter rotation. Right angles are angles whose measure is 90º. Obtuse angles are greater than 90º, but less than 180º. That s more than a quarter rotation, but less than a half turn. nd finally, straight angles measure 180º. acute right obtuse straight We call two angles whose sum is 90º complementary angles. For instance, if m P = 40 and m Q = 50, then P and Q are complementary angles. If m = 30, then the complement of measures 60. Two angles whose sum is 180º are called supplementary angles. If m M = 100 and m S = 80, then M and S are supplementary angles. Example: Name an angle that is complementary to Name an angle that is supplementary to If m 2 = 50, what is the measure of 1? 4. What is the measure of 4? 5. What is the sum of the measures of 1, 2, 3, 4 nd a 5?? Classifying Lines Two lines are parallel lines if they do not intersect and lie in the same plane. The symbol is used to show two lines are parallel. Triangles ( ) or arrowheads (>) are used in a diagram to indicate lines are parallel. l m f g f > l m g > Math 7 Notes Unit 8: Geometric Figures Page 3 of 16

4 Two lines are perpendicular lines if they intersect to form a right angle. The symbol is used to state that two lines are perpendicular. p q p q Two lines are skew lines if they do not lie in the same plane and do not intersect. r t Lines r and t are skew lines. ngle Relationships Objective: (6.12)The student will describe properties of parallel and perpendicular lines. (6.15)The student will verify congruent angles and parallel and perpendicular lines. djacent angles are two angles that have a common vertex, a common side (ray), and no common interior points. P T Q S R PQR and PQT are adjacent angles. PQT and TQS are adjacent angles. TQS and SQR are adjacent angles. SQR and RQP are adjacent angles. Vertical angles are formed when two lines intersect they are opposite each other. These angles always have the same measure. We call angles with the same measure congruent. P T Q S R PQR and TQS are vertical angles. PQT and RQS are vertical angles. Math 7 Notes Unit 8: Geometric Figures Page 4 of 16

5 ngles will be shown as congruent by using tick marks again. If angles are marked with the same number of tick marks, then the angles are congruent. P R Q TQP RQS TQS PQR T S transversal is a line that intersects two or more lines. In the figure to the right, line t is a transversal. If I asked you to look at the figure and find two angles that are on the same side of the transversal, one an interior angle (between the lines), the other an exterior angle, that were not adjacent, could you do it? 2 and 3are on the same side of the transversal, one interior, the other is exterior, but they are adjacent. These angles do not fit the conditions t m n How about 2 and 6? These two angles do fit the conditions. We call these angles corresponding angles. Can you name any other pairs of corresponding angles? If you said 3 and 7, 4 and 8, 1 and 5, you d be right. When a pair of parallel lines is cut by a transversal, there is a special relationship between the corresponding angles. Discover what this relationship is! ) Use the lines on a piece of graph paper or a piece of lined paper as a guide to draw a pair of parallel lines. You can also use both edges of your straightedge to create parallel lines on a blank sheet of paper. 2) Draw a transversal intersecting the parallel lines. Label the angles with numbers as in the diagram above. 3) Measure 1. Calculate the measures of the other three angles that share the same vertex. 4) Measure 8 and calculate the measures of the other three angles. Record your findings into the table. ngle Measure ngle Measure Math 7 Notes Unit 8: Geometric Figures Page 5 of 16

6 Look for patterns. Complete the conjectures below: If two parallel lines are cut by a transversal, then the corresponding angles are. Hopefully, you discovered that the corresponding angles created when a transversal intersects parallel lines are congruent! This will save us time when finding angle measures. Example: m 2 = 50. Find the measure of all other angles. m 1 = 130, since 1 and 2 are adjacent and supplementary m 3 = 130, since 1 and 3are vertical angles or 2 and 3 are adjacent and supplementary a b a b m 4 = 50, since 2 and 4 are vertical angles or 1 and 4 are adjacent and supplementary m 5 = 130, since 1 and 5 are corresponding angles m 7 = 130, m 6 = 50, and m 8 = 50 (using same reasoning as above) Circles circle is defined as all points in a plane that are equal distance (called the radius, C) from a fixed point (called the center of the circle, point C). We name circles by its center point. For example, if the center of the circle is point C, then the circle is called circle C. The distance across the circle, through the center, is called the diameter( DB ). D E C F B chord in a circle is a line segment whose endpoints are on the circle ( EF ). n arc is a continuous part of the circle that is named by its endpoints( EF ). central angle is an angle formed by 2 radii ( DC). sector of a circle is that part of the circle enclosed by an arc ( D ) and 2 radii ( DC and C ). sector is the shaded region shown in the circle to the right. D C Math 7 Notes Unit 8: Geometric Figures Page 6 of 16

7 Example: Determine which of the following are true or false for the circle given. 1. FG is a diameter of the circle. false F 2. GJ is a radius of the circle. true 3. HK and HJ are both chords of the circle. true H G 4. HGF and FGJ are supplementary angles. true Fill in the blank: K 5. The central angle that is part of the sector shaded in the circle is named. FGJ 6. If m HGF = 120, the measure of FGJ is If the shaded sector represents 20% of the circle graph, what would be the measure of the central angle? 20% of 360 = 72 J Classifying Polygons Objectives: (6.7)The student will draw regular and irregular polygons. (6.8)The student will identify regular and irregular polygons. (6.9)The student will describe regular and irregular polygons. (6.10)The student will classify regular and irregular polygons by a variety of attributes. (6.11)The student will compare regular and irregular polygons. polygon is defined as a closed geometric figure formed by connecting line segments endpoint to endpoint. Polygons Not Polygons regular polygon is one in which all the sides are of equal length and all the angles have the same measure. Note: When labeling geometric figures, mark angles and Examples: segments that are equal in measure with similar marks. For example, in the pentagon all the angles are marked equal with an arc with one slash and the sides marked equal with one slash. In triangle BC, the measure of B and C are B C shown equal with two slashes. Regular pentagon with Not a regular polygon all sides and all angles as only 2 sides are congruent congruent. Math 7 Notes Unit 8: Geometric Figures Page 7 of 16

8 Polygons are named by the number of sides. We know a triangle has 3 sides. Below are the names of other polygons. Polygons Quadrilateral Pentagon Hexagon Heptagon Octagon Nonagon Decagon # of sides Have you ever had a problem with drawing a polygon? Many times we end up with everything bunched at the end, or not a polygon. Here is a suggestion to more easily draw a polygon: 1. Lightly draw a circle. 2. Place points on the circle to represent the endpoints of the segments of the polygon you wish to create. 3. Connect the points to create your polygon. 4. Erase the circle. You have your polygon! Classifying Triangles Triangles can be classified by the measures of their angles: acute triangle 3 acute angles right triangle 1 right angle obtuse triangle 1 obtuse angle Math 7 Notes Unit 8: Geometric Figures Page 8 of 16

9 Example: Classify each triangle by their angle measure: 20 D G E B 45 C F H J K M L Triangles can also be classified by the lengths of their sides. You can show tick marks to show congruent sides. equilateral triangle 3 congruent sides isosceles triangle at least 2 congruent sides scalene triangle no congruent sides equilateral isosceles scalene Example: Classify the triangle. The perimeter of the triangle is 15 cm. Using the information given regarding the perimeter: x = 15 x = 15 x = 2.5 Since 2 sides are congruent, the triangle is isosceles. x 10 cm 2.5 cm tree diagram could also be used to show the triangle relationships. Tree Diagram for Triangles triangles acute obtuse right scalene isosceles scalene isosceles scalene isosceles equilateral Math 7 Notes Unit 8: Geometric Figures Page 9 of 16

10 Classifying Quadrilaterals quadrilateral is a plane figure with four sides and four angles. They are classified based on congruent sides, parallel sides and right angles. Quadrilateral Type Definition Example >> Parallelogram Quadrilateral with both pairs of opposite sides parallel. >> Rhombus Parallelogram with four congruent sides. Note: This polygon is a parallelogram. Rectangle Parallelogram with four right angles. Note: This polygon is a parallelogram. Square Parallelogram with four right angles and four congruent sides. Note: This polygon is a parallelogram. Trapezoid Quadrilateral with exactly one pair of parallel sides. >> >> nother way to show the relationship of the parallelograms is to complete a Venn diagram as shown below. parallelograms rectangles squares rhombi Math 7 Notes Unit 8: Geometric Figures Page 10 of 16

11 Vocabulary becomes very important when trying to solve word problems about quadrilaterals. Example: quadrilateral has both pairs of opposite sides parallel. One set of opposite angles are congruent and acute. The other set of angles is congruent and obtuse. ll four sides are NOT congruent. Which name below best classifies this figure?. parallelogram B. rectangle C. rhombus D. trapezoid We have both pairs of opposite sides parallel, so it cannot be the trapezoid. Since the angles are not 90 in measure, we can rule out the rectangle. We are told that the 4 sides are not congruent, so it cannot be the rhombus. Therefore, we have a parallelogram. ngle Measures in Polygons Objective: (6.21)The student will determine the sum of the interior angles of polygons. The sum of the angle measures of any triangle is 180. This can be shown with a quick demonstration: 1) Draw and label a large triangle as shown. 2) Cut the triangle out. 3) Tear each angle from the triangle and place them so their vertices meet at a point. a a b a c b c b c The sum of the angle measures in any quadrilateral can be found by dividing the figure into 2 triangles. Since the sum of the angle measures in each of these triangles is 180, we can reason that the sum of the angle measures in our quadrilateral would be = 360 We can continue this reasoning with other polygons. Math 7 Notes Unit 8: Geometric Figures Page 11 of 16

12 Finish identifying the polygons below by name; then complete drawing all the diagonals from one vertex of the polygon. Triangle Quadrilateral Number of sides of polygon Triangles formed by diagonals from one vertex 1 2 Sum of measures of angles = = 360 Example: Find the unknown angle measure in the quadrilateral. 52 We know the sum of the angle measures in a quadrilateral is x = 360 x = 360 x = 81 x The missing angle is 81. Example: Find the sum of the angle measures in a decagon. Divide the polygon into triangles to show how that reasoning could get you to the answer. decagon has 10 sides. From one vertex we can diagonals to create 8 triangles = 1440 There are 1440 in a decagon Math 7 Notes Unit 8: Geometric Figures Page 12 of 16

13 Identifying Congruent Figures We know two figures are congruent if they have the same size and shape. The tiles on a floor are usually congruent to each other; the desk tops in your classroom are probably congruent to each other. If all the corresponding sides and angles of two polygons are congruent, then the polygons are congruent. There is a short cut we can use with triangles only. If all the corresponding sides of a triangle are congruent, then the triangles are congruent. This is called side-side-side ; a geometry course will go into this in much more detail. For us, it is a way to determine whether or not triangles are congruent by just looking at the sides (we do not have to check the angle measures). Please note: this works for triangles ONLY. Example: re the 2 triangles congruent? O Yes, since all 3 corresponding sides are congruent. We write CT DOG. C T G D Example: re the quadrilaterals congruent? Maybe we cannot be sure until we know if all the corresponding angles are congruent. 2 m 4 m 4 m 2 m 4 m 4 m 2 m In the second group, we can now see that all of the corresponding angles are congruent; therefore, the quadrilaterals are congruent. 2 m 4 m 4 m m 2 m 4 m 2 m One of the values of knowing that two figures are congruent is the ability to find missing measures in figures. Example: Determine the missing measures in each set of congruent polygons. Since the figures are congruent, the corresponding angles and sides are congruent. Therefore, x = 110 and y = 5 inches. 5 in in. 5 in in x 110 y 70 5 in. 5 in in. Math 7 Notes Unit 8: Geometric Figures Page 13 of 16

14 Transformations Objectives: (6.18)The student will describe the location of the original figure and its transformation on a coordinate plane. (6.22)The student will explore transformations using coordinate geometry. Geometry not only looks at figures, it also studies the movement of figures. If you move all the points of one figure to create a new geometric figure, you call the new figure the image. Each point of the image matches exactly with a corresponding point of the original figure; in other words, the image is congruent to the original figure. This changing of position is called a transformation. There are 3 types of transformations we are going to study: translations, rotation, and reflection. You may be more familiar with these as being called slide, turn, and flip. translation is the simplest. If you copy a figure onto a piece of paper, than slide the paper along a straight path without turning it, your slide motion represents a translation. rotation is a turning motion. Points of the original figure rotate an identical number of degrees around a fixed center pint. reflection flips the figure across a line of reflection, creating a mirror image. Math 7 Notes Unit 8: Geometric Figures Page 14 of 16

15 Transformations can also be shown on a coordinate grid. translation will move each point like an ordered pair. For example, the translation shown moved the triangle right 3 units and up 4 units, which we could also show x+ 3, y+ 4. as ( ) ' C' B' prime mark (') is used with the label of an image point. The image of point is shown as point ' (read prime ). C B reflection can be shown on a coordinate grid by reflecting the figure across an axis. B G E F cross the x-axis, the figure will follow the rule x, y. ( ) C C' D D' ' B' E' F' G' cross the x-axis, the figure will follow the rule xy,. ( ) Math 7 Notes Unit 8: Geometric Figures Page 15 of 16

16 rotation can be shown on a coordinate grid by moving the figure about a point. Unless it is indicated otherwise, rotation occurs around the origin. This example shows a rotation counterclockwise about the origin. F' G' ' E' C' D' B' F G E B C D rotation can also occur around a given point. This example rotated the triangle 180 about point X. Z Y X Y' Z' Math 7 Notes Unit 8: Geometric Figures Page 16 of 16

Math 7, Unit 08: Geometric Figures Notes

Math 7, Unit 08: Geometric Figures Notes Math 7, Unit 08: Geometric Figures Notes Points, Lines and Planes; Line Segments and Rays s we begin any new topic, we have to familiarize ourselves with the language and notation to be successful. My

More information

Math 6, Unit 8 Notes: Geometric Relationships

Math 6, Unit 8 Notes: Geometric Relationships Math 6, Unit 8 Notes: Geometric Relationships Points, Lines and Planes; Line Segments and Rays As we begin any new topic, we have to familiarize ourselves with the language and notation to be successful.

More information

Math 6, Unit 8 Notes: Geometric Relationships

Math 6, Unit 8 Notes: Geometric Relationships Math 6, Unit 8 Notes: Geometric Relationships Points, Lines and Planes; Line Segments and Rays As we begin any new topic, we have to familiarize ourselves with the language and notation to be successful.

More information

Lines Plane A flat surface that has no thickness and extends forever.

Lines Plane A flat surface that has no thickness and extends forever. Lines Plane A flat surface that has no thickness and extends forever. Point an exact location Line a straight path that has no thickness and extends forever in opposite directions Ray Part of a line that

More information

Chapter 8. Properties of Triangles and Quadrilaterals. 02/2017 LSowatsky

Chapter 8. Properties of Triangles and Quadrilaterals. 02/2017 LSowatsky Chapter 8 Properties of Triangles and Quadrilaterals 02/2017 LSowatsky 1 8-1A: Points, Lines, and Planes I can Identify and label basic geometric figures. LSowatsky 2 Vocabulary: Point: a point has no

More information

Section 9.1. Points, Lines, Planes, and Angles. Copyright 2013, 2010, 2007, Pearson, Education, Inc.

Section 9.1. Points, Lines, Planes, and Angles. Copyright 2013, 2010, 2007, Pearson, Education, Inc. Section 9.1 Points, Lines, Planes, and Angles What You Will Learn Points Lines Planes Angles 9.1-2 Basic Terms A point, line, and plane are three basic terms in geometry that are NOT given a formal definition,

More information

Copyright 2009 Pearson Education, Inc. Chapter 9 Section 1 Slide 1 AND

Copyright 2009 Pearson Education, Inc. Chapter 9 Section 1 Slide 1 AND Copyright 2009 Pearson Education, Inc. Chapter 9 Section 1 Slide 1 AND Chapter 9 Geometry Copyright 2009 Pearson Education, Inc. Chapter 9 Section 1 Slide 2 WHAT YOU WILL LEARN Points, lines, planes, and

More information

Unit 10 Study Guide: Plane Figures

Unit 10 Study Guide: Plane Figures Unit 10 Study Guide: Plane Figures *Be sure to watch all videos within each lesson* You can find geometric shapes in art. Whether determining the amount of leading or the amount of glass needed for a piece

More information

GEOMETRY is the study of points in space

GEOMETRY is the study of points in space CHAPTER 5 Logic and Geometry SECTION 5-1 Elements of Geometry GEOMETRY is the study of points in space POINT indicates a specific location and is represented by a dot and a letter R S T LINE is a set of

More information

Pre-Algebra Notes Unit 13: Angle Relationships and Transformations

Pre-Algebra Notes Unit 13: Angle Relationships and Transformations Pre-Algebra Notes Unit 13: Angle Relationships and Transformations Angle Relationships Sllabus Objectives: (7.1) The student will identif measures of complementar, supplementar, and vertical angles. (7.2)

More information

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles.

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles. Geometry Practice Name 1. Angles located next to one another sharing a common side are called angles. 2. Planes that meet to form right angles are called planes. 3. Lines that cross are called lines. 4.

More information

Math 3315: Geometry Vocabulary Review Human Dictionary: WORD BANK

Math 3315: Geometry Vocabulary Review Human Dictionary: WORD BANK Math 3315: Geometry Vocabulary Review Human Dictionary: WORD BANK [acute angle] [acute triangle] [adjacent interior angle] [alternate exterior angles] [alternate interior angles] [altitude] [angle] [angle_addition_postulate]

More information

Term Definition Figure

Term Definition Figure Notes LT 1.1 - Distinguish and apply basic terms of geometry (coplanar, collinear, bisectors, congruency, parallel, perpendicular, etc.) Term Definition Figure collinear on the same line (note: you do

More information

Angle Unit Definitions

Angle Unit Definitions ngle Unit Definitions Name lock Date Term Definition Notes Sketch D djacent ngles Two coplanar angles with a coon side, a coon vertex, and no coon interior points. Must be named with 3 letters OR numbers

More information

Geometry Vocabulary. Name Class

Geometry Vocabulary. Name Class Geometry Vocabulary Name Class Definition/Description Symbol/Sketch 1 point An exact location in space. In two dimensions, an ordered pair specifies a point in a coordinate plane: (x,y) 2 line 3a line

More information

Geometry Vocabulary. acute angle-an angle measuring less than 90 degrees

Geometry Vocabulary. acute angle-an angle measuring less than 90 degrees Geometry Vocabulary acute angle-an angle measuring less than 90 degrees angle-the turn or bend between two intersecting lines, line segments, rays, or planes angle bisector-an angle bisector is a ray that

More information

Moore Catholic High School Math Department

Moore Catholic High School Math Department Moore Catholic High School Math Department Geometry Vocabulary The following is a list of terms and properties which are necessary for success in a Geometry class. You will be tested on these terms during

More information

Moore Catholic High School Math Department

Moore Catholic High School Math Department Moore Catholic High School Math Department Geometry Vocabulary The following is a list of terms and properties which are necessary for success in a Geometry class. You will be tested on these terms during

More information

NORTH HAVEN HIGH SCHOOL. Applied Geometry (Level 1) Summer Assignment 2017

NORTH HAVEN HIGH SCHOOL. Applied Geometry (Level 1) Summer Assignment 2017 NORTH HAVEN HIGH SCHOOL 221 Elm Street North Haven, CT 06473 June 2017 Applied Geometry (Level 1) Summer Assignment 2017 Dear Parents, Guardians, and Students, The Geometry curriculum builds on geometry

More information

Boardworks Ltd KS3 Mathematics. S1 Lines and Angles

Boardworks Ltd KS3 Mathematics. S1 Lines and Angles 1 KS3 Mathematics S1 Lines and Angles 2 Contents S1 Lines and angles S1.1 Labelling lines and angles S1.2 Parallel and perpendicular lines S1.3 Calculating angles S1.4 Angles in polygons 3 Lines In Mathematics,

More information

Secondary Math II Honors. Unit 4 Notes. Polygons. Name: Per:

Secondary Math II Honors. Unit 4 Notes. Polygons. Name: Per: Secondary Math II Honors Unit 4 Notes Polygons Name: Per: Day 1: Interior and Exterior Angles of a Polygon Unit 4 Notes / Secondary 2 Honors Vocabulary: Polygon: Regular Polygon: Example(s): Discover the

More information

NORTH HAVEN HIGH SCHOOL. Geometry (Level 2 and Level 3) Summer Assignment 2016

NORTH HAVEN HIGH SCHOOL. Geometry (Level 2 and Level 3) Summer Assignment 2016 221 Elm Street NORTH HAVEN HIGH SCHOOL North Haven, CT 06473 June 2016 Geometry (Level 2 and Level 3) Summer Assignment 2016 Dear Parent(s) or Guardian(s): Your child is currently scheduled to take Geometry

More information

Points, lines, angles

Points, lines, angles Points, lines, angles Point Line Line segment Parallel Lines Perpendicular lines Vertex Angle Full Turn An exact location. A point does not have any parts. A straight length that extends infinitely in

More information

Chapter 1-2 Points, Lines, and Planes

Chapter 1-2 Points, Lines, and Planes Chapter 1-2 Points, Lines, and Planes Undefined Terms: A point has no size but is often represented by a dot and usually named by a capital letter.. A A line extends in two directions without ending. Lines

More information

Unit 1, Lesson 1: Moving in the Plane

Unit 1, Lesson 1: Moving in the Plane Unit 1, Lesson 1: Moving in the Plane Let s describe ways figures can move in the plane. 1.1: Which One Doesn t Belong: Diagrams Which one doesn t belong? 1.2: Triangle Square Dance m.openup.org/1/8-1-1-2

More information

Geometry Basics of Geometry Precise Definitions Unit CO.1 OBJECTIVE #: G.CO.1

Geometry Basics of Geometry Precise Definitions Unit CO.1 OBJECTIVE #: G.CO.1 OBJECTIVE #: G.CO.1 OBJECTIVE Know precise definitions of angle, circle, perpendicular line, parallel line, and line segment, based on the undefined notions of point, line, distance along a line, and distance

More information

a triangle with all acute angles acute triangle angles that share a common side and vertex adjacent angles alternate exterior angles

a triangle with all acute angles acute triangle angles that share a common side and vertex adjacent angles alternate exterior angles acute triangle a triangle with all acute angles adjacent angles angles that share a common side and vertex alternate exterior angles two non-adjacent exterior angles on opposite sides of the transversal;

More information

Contents. Lines, angles and polygons: Parallel lines and angles. Triangles. Quadrilaterals. Angles in polygons. Congruence.

Contents. Lines, angles and polygons: Parallel lines and angles. Triangles. Quadrilaterals. Angles in polygons. Congruence. Colegio Herma. Maths Bilingual Departament Isabel Martos Martínez. 2015 Contents Lines, angles and polygons: Parallel lines and angles Triangles Quadrilaterals Angles in polygons Congruence Similarity

More information

Elementary Planar Geometry

Elementary Planar Geometry Elementary Planar Geometry What is a geometric solid? It is the part of space occupied by a physical object. A geometric solid is separated from the surrounding space by a surface. A part of the surface

More information

Geometry Reasons for Proofs Chapter 1

Geometry Reasons for Proofs Chapter 1 Geometry Reasons for Proofs Chapter 1 Lesson 1.1 Defined Terms: Undefined Terms: Point: Line: Plane: Space: Postulate 1: Postulate : terms that are explained using undefined and/or other defined terms

More information

Math Polygons

Math Polygons Math 310 9.2 Polygons Curve & Connected Idea The idea of a curve is something you could draw on paper without lifting your pencil. The idea of connected is that a set can t be split into two disjoint sets.

More information

Pre-Algebra, Unit 10: Measurement, Area, and Volume Notes

Pre-Algebra, Unit 10: Measurement, Area, and Volume Notes Pre-Algebra, Unit 0: Measurement, Area, and Volume Notes Triangles, Quadrilaterals, and Polygons Objective: (4.6) The student will classify polygons. Take this opportunity to review vocabulary and previous

More information

Geometry Foundations Planning Document

Geometry Foundations Planning Document Geometry Foundations Planning Document Unit 1: Chromatic Numbers Unit Overview A variety of topics allows students to begin the year successfully, review basic fundamentals, develop cooperative learning

More information

MAT104: Fundamentals of Mathematics II Introductory Geometry Terminology Summary. Section 11-1: Basic Notions

MAT104: Fundamentals of Mathematics II Introductory Geometry Terminology Summary. Section 11-1: Basic Notions MAT104: Fundamentals of Mathematics II Introductory Geometry Terminology Summary Section 11-1: Basic Notions Undefined Terms: Point; Line; Plane Collinear Points: points that lie on the same line Between[-ness]:

More information

Contents. Lines, angles and polygons: Parallel lines and angles. Triangles. Quadrilaterals. Angles in polygons. Congruence.

Contents. Lines, angles and polygons: Parallel lines and angles. Triangles. Quadrilaterals. Angles in polygons. Congruence. Colegio Herma. Maths Bilingual Departament Isabel Martos Martínez. 2015 Contents Lines, angles and polygons: Parallel lines and angles Triangles Quadrilaterals Angles in polygons Congruence Similarity

More information

Index COPYRIGHTED MATERIAL. Symbols & Numerics

Index COPYRIGHTED MATERIAL. Symbols & Numerics Symbols & Numerics. (dot) character, point representation, 37 symbol, perpendicular lines, 54 // (double forward slash) symbol, parallel lines, 54, 60 : (colon) character, ratio of quantity representation

More information

UNIT 6: Connecting Algebra & Geometry through Coordinates

UNIT 6: Connecting Algebra & Geometry through Coordinates TASK: Vocabulary UNIT 6: Connecting Algebra & Geometry through Coordinates Learning Target: I can identify, define and sketch all the vocabulary for UNIT 6. Materials Needed: 4 pieces of white computer

More information

Polygon. Note: Each segment is called a side. Each endpoint is called a vertex.

Polygon. Note: Each segment is called a side. Each endpoint is called a vertex. Polygons Polygon A closed plane figure formed by 3 or more segments. Each segment intersects exactly 2 other segments at their endpoints. No 2 segments with a common endpoint are collinear. Note: Each

More information

Reporting Category 3. Geometry and Measurement BINGO

Reporting Category 3. Geometry and Measurement BINGO Reporting Category 3 Geometry and Measurement BINGO names an exact location in space, named by a capital letter Has NO width, length, or depth. 2 a straight path with 2 endpoints, has a definite beginning

More information

Pre-Algebra Notes Unit 10: Geometric Figures & Their Properties; Volume

Pre-Algebra Notes Unit 10: Geometric Figures & Their Properties; Volume Pre-Algebra Notes Unit 0: Geometric Figures & Their Properties; Volume Triangles, Quadrilaterals, and Polygons Syllabus Objectives: (4.6) The student will validate conclusions about geometric figures and

More information

5th Grade Geometry

5th Grade Geometry Slide 1 / 112 Slide 2 / 112 5th Grade Geometry 2015-11-23 www.njctl.org Slide 3 / 112 Geometry Unit Topics Click on the topic to go to that section Polygons Classifying Triangles & Quadrilaterals Coordinate

More information

Math-in-CTE Lesson Plan Template

Math-in-CTE Lesson Plan Template Lesson Development Math-in-CTE Lesson Plan Template Lesson Title: Basic Geometric Concepts Lesson # Author(s): Phone Number(s): E-mail Address(es): Juan Carlos Martínez jcmartinez@dadeschoolsnet Bergman

More information

Geometry. Geometry is the study of shapes and sizes. The next few pages will review some basic geometry facts. Enjoy the short lesson on geometry.

Geometry. Geometry is the study of shapes and sizes. The next few pages will review some basic geometry facts. Enjoy the short lesson on geometry. Geometry Introduction: We live in a world of shapes and figures. Objects around us have length, width and height. They also occupy space. On the job, many times people make decision about what they know

More information

MATH 113 Section 8.2: Two-Dimensional Figures

MATH 113 Section 8.2: Two-Dimensional Figures MATH 113 Section 8.2: Two-Dimensional Figures Prof. Jonathan Duncan Walla Walla University Winter Quarter, 2008 Outline 1 Classifying Two-Dimensional Shapes 2 Polygons Triangles Quadrilaterals 3 Other

More information

Mrs. Daniel s Geometry Vocab List

Mrs. Daniel s Geometry Vocab List Mrs. Daniel s Geometry Vocab List Geometry Definition: a branch of mathematics concerned with questions of shape, size, relative position of figures, and the properties of space. Refectional Symmetry Definition:

More information

Postulates, Theorems, and Corollaries. Chapter 1

Postulates, Theorems, and Corollaries. Chapter 1 Chapter 1 Post. 1-1-1 Through any two points there is exactly one line. Post. 1-1-2 Through any three noncollinear points there is exactly one plane containing them. Post. 1-1-3 If two points lie in a

More information

Answer Key. 1.1 The Three Dimensions. Chapter 1 Basics of Geometry. CK-12 Geometry Honors Concepts 1. Answers

Answer Key. 1.1 The Three Dimensions. Chapter 1 Basics of Geometry. CK-12 Geometry Honors Concepts 1. Answers 1.1 The Three Dimensions 1. Possible answer: You need only one number to describe the location of a point on a line. You need two numbers to describe the location of a point on a plane. 2. vary. Possible

More information

MATH DICTIONARY. Number Sense. Number Families. Operations. Counting (Natural) Numbers The numbers we say when we count. Example: {0, 1, 2, 3, 4 }

MATH DICTIONARY. Number Sense. Number Families. Operations. Counting (Natural) Numbers The numbers we say when we count. Example: {0, 1, 2, 3, 4 } Number Sense Number Families MATH DICTIONARY Counting (Natural) Numbers The numbers we say when we count Example: {1, 2, 3, 4 } Whole Numbers The counting numbers plus zero Example: {0, 1, 2, 3, 4 } Positive

More information

For full credit, show all work. Study all geometry vocabulary words from your chapter packet.

For full credit, show all work. Study all geometry vocabulary words from your chapter packet. Accelerated Review 9: Geometric Relationships Name: For full credit, show all work. Study all geometry vocabulary words from your chapter packet. Caleb drew a quadrilateral on his paper. Which of the following

More information

Geometry Basics * Rory Adams Free High School Science Texts Project Mark Horner Heather Williams. 1 Introduction. 2 Points and Lines

Geometry Basics * Rory Adams Free High School Science Texts Project Mark Horner Heather Williams. 1 Introduction. 2 Points and Lines OpenStax-NX module: m31494 1 Geometry asics * Rory dams Free High School Science Texts Project Mark Horner Heather Williams This work is produced by OpenStax-NX and licensed under the reative ommons ttribution

More information

SOL Chapter Due Date

SOL Chapter Due Date Name: Block: Date: Geometry SOL Review SOL Chapter Due Date G.1 2.2-2.4 G.2 3.1-3.5 G.3 1.3, 4.8, 6.7, 9 G.4 N/A G.5 5.5 G.6 4.1-4.7 G.7 6.1-6.6 G.8 7.1-7.7 G.9 8.2-8.6 G.10 1.6, 8.1 G.11 10.1-10.6, 11.5,

More information

Geometry Vocabulary Math Fundamentals Reference Sheet Page 1

Geometry Vocabulary Math Fundamentals Reference Sheet Page 1 Math Fundamentals Reference Sheet Page 1 Acute Angle An angle whose measure is between 0 and 90 Acute Triangle A that has all acute Adjacent Alternate Interior Angle Two coplanar with a common vertex and

More information

An angle that has a measure less than a right angle.

An angle that has a measure less than a right angle. Unit 1 Study Strategies: Two-Dimensional Figures Lesson Vocab Word Definition Example Formed by two rays or line segments that have the same 1 Angle endpoint. The shared endpoint is called the vertex.

More information

Unit 3: Triangles and Polygons

Unit 3: Triangles and Polygons Unit 3: Triangles and Polygons Background for Standard G.CO.9: Prove theorems about triangles. Objective: By the end of class, I should Example 1: Trapezoid on the coordinate plane below has the following

More information

Describe Plane Shapes

Describe Plane Shapes Lesson 12.1 Describe Plane Shapes You can use math words to describe plane shapes. point an exact position or location line endpoints line segment ray a straight path that goes in two directions without

More information

Unit 2: Triangles and Polygons

Unit 2: Triangles and Polygons Unit 2: Triangles and Polygons Background for Standard G.CO.9: Prove theorems about lines and angles. Objective: By the end of class, I should Using the diagram below, answer the following questions. Line

More information

SHAPE AND STRUCTURE. Shape and Structure. An explanation of Mathematical terminology

SHAPE AND STRUCTURE. Shape and Structure. An explanation of Mathematical terminology Shape and Structure An explanation of Mathematical terminology 2005 1 POINT A dot Dots join to make lines LINE A line is 1 dimensional (length) A line is a series of points touching each other and extending

More information

High School Mathematics Geometry Vocabulary Word Wall Cards

High School Mathematics Geometry Vocabulary Word Wall Cards High School Mathematics Geometry Vocabulary Word Wall Cards Table of Contents Reasoning, Lines, and Transformations Basics of Geometry 1 Basics of Geometry 2 Geometry Notation Logic Notation Set Notation

More information

HS Pre-Algebra Notes Unit 10: Measurement, Area, and Volume

HS Pre-Algebra Notes Unit 10: Measurement, Area, and Volume HS Pre-Algebra Notes Unit 0: Measurement, Area, and Volume Triangles, Quadrilaterals, and Polygons Syllabus Objectives: (5.6) The student will classify polygons. (5.5) The student will validate conclusions

More information

MPM1D Page 1 of 6. length, width, thickness, area, volume, flatness, infinite extent, contains infinite number of points. A part of a with endpoints.

MPM1D Page 1 of 6. length, width, thickness, area, volume, flatness, infinite extent, contains infinite number of points. A part of a with endpoints. MPM1D Page 1 of 6 Unit 5 Lesson 1 (Review) Date: Review of Polygons Activity 1: Watch: http://www.mathsisfun.com/geometry/dimensions.html OBJECT Point # of DIMENSIONS CHARACTERISTICS location, length,

More information

Section 1-1 Points, Lines, and Planes

Section 1-1 Points, Lines, and Planes Section 1-1 Points, Lines, and Planes I CAN. Identify and model points, lines, and planes. Identify collinear and coplanar points and intersecting lines and planes in space. Undefined Term- Words, usually

More information

ame Date Class Practice A 11. What is another name for a regular quadrilateral with four right angles?

ame Date Class Practice A 11. What is another name for a regular quadrilateral with four right angles? ame Date Class Practice A Polygons Name each polygon. 1. 2. 3. 4. 5. 6. Tell whether each polygon appears to be regular or not regular. 7. 8. 9. 10. What is another name for a regular triangle? 11. What

More information

ACT Math and Science - Problem Drill 11: Plane Geometry

ACT Math and Science - Problem Drill 11: Plane Geometry ACT Math and Science - Problem Drill 11: Plane Geometry No. 1 of 10 1. Which geometric object has no dimensions, no length, width or thickness? (A) Angle (B) Line (C) Plane (D) Point (E) Polygon An angle

More information

Any questions about the material so far? About the exercises?

Any questions about the material so far? About the exercises? Any questions about the material so far? About the exercises? Here is a question for you. In the diagram on the board, DE is parallel to AC, DB = 4, AB = 9 and BE = 8. What is the length EC? Polygons Definitions:

More information

Prime Time (Factors and Multiples)

Prime Time (Factors and Multiples) CONFIDENCE LEVEL: Prime Time Knowledge Map for 6 th Grade Math Prime Time (Factors and Multiples). A factor is a whole numbers that is multiplied by another whole number to get a product. (Ex: x 5 = ;

More information

Introduction to Geometry

Introduction to Geometry Introduction to Geometry Objective A: Problems involving lines and angles Three basic concepts of Geometry are: Points are a single place represented by a dot A Lines are a collection of points that continue

More information

Shapes and Designs - Unit Test Review Sheet

Shapes and Designs - Unit Test Review Sheet Name: Class: Date: ID: A Shapes and Designs - Unit Test Review Sheet 1. a. Suppose the measure of an angle is 25. What is the measure of its complementary angle? b. Draw the angles to show that you are

More information

Answer Key. 1.1 Basic Geometric Definitions. Chapter 1 Basics of Geometry. CK-12 Geometry Concepts 1

Answer Key. 1.1 Basic Geometric Definitions. Chapter 1 Basics of Geometry. CK-12 Geometry Concepts 1 1.1 Basic Geometric Definitions 1. WX, XW, WY, YW, XY, YX and line m. 2. Plane V, Plane RST, Plane RTS, Plane STR, Plane SRT, Plane TSR, and Plane TRS. 3. 4. A Circle 5. PQ intersects RS at point Q 6.

More information

CCSD Proficiency Scale - Language of Geometry

CCSD Proficiency Scale - Language of Geometry CCSD Scale - Language of Geometry Content Area: HS Math Grade : Geometry Standard Code: G-CO.1 application G-CO.1 Know precise definitions of angle, circle, perpendicular lines, parallel lines, and line

More information

5-Minute Check Solve.

5-Minute Check Solve. 5-Minute Check (over Chapter 9) Use with Lesson 10-1 Solve. 1. There are 12 balls in a hat and 3 are red. What is the probability of drawing a red ball? 2. Use the Fundamental Counting Principle to find

More information

Ready to Go On? Skills Intervention Building Blocks of Geometry

Ready to Go On? Skills Intervention Building Blocks of Geometry 8-1 Ready to Go On? Skills Intervention Building Blocks of Geometry A point is an exact location. A line is a straight path that extends without end in opposite directions. A plane is a flat surface that

More information

Ch 1 Note Sheet L2 Key.doc 1.1 Building Blocks of Geometry

Ch 1 Note Sheet L2 Key.doc 1.1 Building Blocks of Geometry 1.1 uilding locks of Geometry Read page 28. It s all about vocabulary and notation! To name something, trace the figure as you say the name, if you trace the figure you were trying to describe you re correct!

More information

1.6 Classifying Polygons

1.6 Classifying Polygons www.ck12.org Chapter 1. Basics of Geometry 1.6 Classifying Polygons Learning Objectives Define triangle and polygon. Classify triangles by their sides and angles. Understand the difference between convex

More information

7-3 Parallel and Perpendicular Lines

7-3 Parallel and Perpendicular Lines 7-3 Parallel and Perpendicular Lines Interior Angles: Exterior Angles: Corresponding Angles: Vertical Angles: Supplementary Angles: 1 2 3 4 5 6 7 8 Complimentary Angles: 7-3 Parallel and Perpendicular

More information

SEVENTH EDITION and EXPANDED SEVENTH EDITION

SEVENTH EDITION and EXPANDED SEVENTH EDITION SEVENTH EDITION and EXPANDED SEVENTH EDITION Slide 9-1 Chapter 9 Geometry 9.1 Points, Lines, Planes, and Angles Basic Terms A line segment is part of a line between two points, including the endpoints.

More information

Right Angle Triangle. Square. Opposite sides are parallel

Right Angle Triangle. Square. Opposite sides are parallel Triangles 3 sides ngles add up to 18⁰ Right ngle Triangle Equilateral Triangle ll sides are the same length ll angles are 6⁰ Scalene Triangle ll sides are different lengths ll angles are different Isosceles

More information

Point A location in geometry. A point has no dimensions without any length, width, or depth. This is represented by a dot and is usually labelled.

Point A location in geometry. A point has no dimensions without any length, width, or depth. This is represented by a dot and is usually labelled. Test Date: November 3, 2016 Format: Scored out of 100 points. 8 Multiple Choice (40) / 8 Short Response (60) Topics: Points, Angles, Linear Objects, and Planes Recognizing the steps and procedures for

More information

The National Strategies Secondary Mathematics exemplification: Y8, 9

The National Strategies Secondary Mathematics exemplification: Y8, 9 Mathematics exemplification: Y8, 9 183 As outcomes, Year 8 pupils should, for example: Understand a proof that the sum of the angles of a triangle is 180 and of a quadrilateral is 360, and that the exterior

More information

November 10, 2004 : Fax:

November 10, 2004 : Fax: Honors Geometry Issue Super Mathter November 0, 004 : 30-0-6030 Fax: 30--864 For class info, visit www.mathenglish.com irect your questions and comments to rli@smart4micro.com Name: Peter Lin Peter Lin

More information

heptagon; not regular; hexagon; not regular; quadrilateral; convex concave regular; convex

heptagon; not regular; hexagon; not regular; quadrilateral; convex concave regular; convex 10 1 Naming Polygons A polygon is a plane figure formed by a finite number of segments. In a convex polygon, all of the diagonals lie in the interior. A regular polygon is a convex polygon that is both

More information

1. Write three things you already know about angles. Share your work with a classmate. Does your classmate understand what you wrote?

1. Write three things you already know about angles. Share your work with a classmate. Does your classmate understand what you wrote? LESSON : PAPER FOLDING. Write three things you already know about angles. Share your work with a classmate. Does your classmate understand what you wrote? 2. Write your wonderings about angles. Share your

More information

Department: Course: Chapter 1

Department: Course: Chapter 1 Department: Course: 2016-2017 Term, Phrase, or Expression Simple Definition Chapter 1 Comprehension Support Point Line plane collinear coplanar A location in space. It does not have a size or shape The

More information

Name Period Date GRADE 7: MATHEMATICS COMMON CORE SUPPLEMENT ANGLES, DRAWINGS, AND ALGEBRAIC CONNECTIONS

Name Period Date GRADE 7: MATHEMATICS COMMON CORE SUPPLEMENT ANGLES, DRAWINGS, AND ALGEBRAIC CONNECTIONS Name Period Date 7-CORE3.1 Geometric Figures Measure and draw angles using a protractor. Review facts about interior angles of triangles and quadrilaterals. Find missing angle measures in geometric diagrams.

More information

Angle Unit Definition Packet

Angle Unit Definition Packet ngle Unit Definition Packet Name lock Date Term Definition Notes Sketch djacent ngles Two angles with a coon, a coon you normay name and, and no coon interior points. 3 4 3 and 4 Vertical ngles Two angles

More information

Math 6: Unit 7: Geometry Notes 2-Dimensional Figures

Math 6: Unit 7: Geometry Notes 2-Dimensional Figures Math 6: Unit 7: Geometry Notes -Dimensional Figures Prep for 6.G.A.1 Classifying Polygons A polygon is defined as a closed geometric figure formed by connecting line segments endpoint to endpoint. Polygons

More information

MCPS Geometry Pacing Guide Jennifer Mcghee

MCPS Geometry Pacing Guide Jennifer Mcghee Units to be covered 1 st Semester: Units to be covered 2 nd Semester: Tools of Geometry; Logic; Constructions; Parallel and Perpendicular Lines; Relationships within Triangles; Similarity of Triangles

More information

TOPIC 2 Building Blocks of Geometry. Good Luck To

TOPIC 2 Building Blocks of Geometry. Good Luck To Good Luck To Period Date PART I DIRECTIONS: Use the Terms (page 2), Definitions (page 3), and Diagrams (page 4) to complete the table Term (capital letters) 1. Chord 2. Definition (roman numerals) Pictures

More information

Points, Lines, Planes, and Angles pp

Points, Lines, Planes, and Angles pp LESSON 5-1 Points, Lines, Planes, and Angles pp. 222 224 Vocabulary point (p. 222) line (p. 222) plane (p. 222) segment (p. 222) ray (p. 222) angle (p. 222) right angle (p. 223) acute angle (p. 223) obtuse

More information

Math 7 - GEOMETRY Two Dimensional Figures will include:

Math 7 - GEOMETRY Two Dimensional Figures will include: Math 7 - GEOMETRY Two Dimensional Figures will include: NACS Standard # 7.G.A. 7.G.B.4 7.G.B.5 7.G.B.6 Standard Draw (freehand, with ruler and protractor, and with technology) geometric shapes with given

More information

Number/Computation. addend Any number being added. digit Any one of the ten symbols: 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9

Number/Computation. addend Any number being added. digit Any one of the ten symbols: 0, 1, 2, 3, 4, 5, 6, 7, 8, or 9 14 Number/Computation addend Any number being added algorithm A step-by-step method for computing array A picture that shows a number of items arranged in rows and columns to form a rectangle associative

More information

Yimin Math Centre. 6.1 Properties of geometrical figures Recognising plane shapes... 1

Yimin Math Centre. 6.1 Properties of geometrical figures Recognising plane shapes... 1 Yimin Math Centre Student Name: Grade: Date: Score: Table of Contents 6 Year 7 Term 3 Week 6 Homework 1 6.1 Properties of geometrical figures............................ 1 6.1.1 Recognising plane shapes...........................

More information

Convex polygon - a polygon such that no line containing a side of the polygon will contain a point in the interior of the polygon.

Convex polygon - a polygon such that no line containing a side of the polygon will contain a point in the interior of the polygon. Chapter 7 Polygons A polygon can be described by two conditions: 1. No two segments with a common endpoint are collinear. 2. Each segment intersects exactly two other segments, but only on the endpoints.

More information

COURSE OBJECTIVES LIST: GEOMETRY

COURSE OBJECTIVES LIST: GEOMETRY COURSE OBJECTIVES LIST: GEOMETRY Geometry Honors is offered. PREREQUISITES: All skills from Algebra I are assumed. A prerequisites test is given during the first week of class to assess knowledge of these

More information

Name: Extra Midterm Review January 2018

Name: Extra Midterm Review January 2018 Name: Extra Midterm Review January 2018 1. Which drawing best illustrates the construction of an equilateral triangle? A) B) C) D) 2. Construct an equilateral triangle in which A is one vertex. A 3. Construct

More information

Unit 3 Geometry. Chapter 7 Geometric Relationships Chapter 8 Measurement Relationships Chapter 9 Optimizing Measurements MPM1D

Unit 3 Geometry. Chapter 7 Geometric Relationships Chapter 8 Measurement Relationships Chapter 9 Optimizing Measurements MPM1D Unit 3 Geometry Chapter 7 Geometric Relationships Chapter 8 Measurement Relationships Chapter 9 Optimizing Measurements MPM1D Chapter 7 Outline Section Subject Homework Notes Lesson and Homework Complete

More information

Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review

Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review Polygon a closed plane figure with at least 3 sides that are segments -the sides do not intersect except at the vertices N-gon -

More information

Chapter 1 Tools of Geometry

Chapter 1 Tools of Geometry Chapter 1 Tools of Geometry Goals: 1) learn to draw conclusions based on patterns 2) learn the building blocks for the structure of geometry 3) learn to measure line segments and angles 4) understand the

More information

4 Mathematics Curriculum. Module Overview... i Topic A: Lines and Angles... 4.A.1. Topic B: Angle Measurement... 4.B.1

4 Mathematics Curriculum. Module Overview... i Topic A: Lines and Angles... 4.A.1. Topic B: Angle Measurement... 4.B.1 New York State Common Core 4 Mathematics Curriculum G R A D E Table of Contents GRADE 4 MODULE 4 Angle Measure and Plane Figures GRADE 4 MODULE 4 Module Overview... i Topic A: Lines and Angles... 4.A.1

More information

Triangle Geometry Isometric Triangles Lesson 1

Triangle Geometry Isometric Triangles Lesson 1 Triangle eometry Isometric Triangles Lesson 1 Review of all the TORMS in OMTRY that you know or soon will know!. Triangles 1. The sum of the measures of the interior angles of a triangle is 180º (Triangle

More information

UNIT PLAN. Big Idea/Theme: Polygons can be identified, classified, and described.

UNIT PLAN. Big Idea/Theme: Polygons can be identified, classified, and described. UNIT PLAN Grade Level: 5 Unit #: 11 Unit Name Geometry Polygons Time: 15 lessons, 18 days Big Idea/Theme: Polygons can be identified, classified, and described. Culminating Assessment: (requirements of

More information