SOLIDWORKS. SOLIDWORKS Routing: Piping and Tubing. Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.

Transcription

1 SOLIDWORKS SOLIDWORKS Routing: Piping and Tubing Dassault Systèmes SolidWorks Corporation 175 Wyman Street Waltham, MA U.S.A.

2 , Dassault Systemes SolidWorks Corporation, a Dassault Systèmes SE company, 175 Wyman Street, Waltham, Mass USA. All Rights Reserved. The information and the software discussed in this document are subject to change without notice and are not commitments by Dassault Systemes SolidWorks Corporation (DS SolidWorks). No material may be reproduced or transmitted in any form or by any means, electronically or manually, for any purpose without the express written permission of DS SolidWorks. The software discussed in this document is furnished under a license and may be used or copied only in accordance with the terms of the license. All warranties given by DS SolidWorks as to the software and documentation are set forth in the license agreement, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of any terms, including warranties, in the license agreement. Patent Notices SOLIDWORKS 3D mechanical CAD and/or Simulation software is protected by U.S. Patents 6,611,725; 6,844,877; 6,898,560; 6,906,712; 7,079,990; 7,477,262; 7,558,705; 7,571,079; 7,590,497; 7,643,027; 7,672,822; 7,688,318; 7,694,238; 7,853,940; 8,305,376; 8,581,902; 8,817,028; 8,910,078; 9,129,083; 9,153,072; 9,262,863; 9,465,894; 9,646,412 and foreign patents, (e.g., EP 1,116,190 B1 and JP 3,517,643). edrawings software is protected by U.S. Patent 7,184,044; U.S. Patent 7,502,027; and Canadian Patent 2,318,706. U.S. and foreign patents pending. Trademarks and Product Names for SOLIDWORKS Products and Services SOLIDWORKS, 3D ContentCentral, 3D PartStream.NET, edrawings, and the edrawings logo are registered trademarks and FeatureManager is a jointly owned registered trademark of DS SolidWorks. CircuitWorks, FloXpress, PhotoView 360, and TolAnalyst are trademarks of DS SolidWorks. FeatureWorks is a registered trademark of HCL Technologies Ltd. SOLIDWORKS 2018, SOLIDWORKS Standard, SOLIDWORKS Professional, SOLIDWORKS Premium, SOLIDWORKS PDM Professional, SOLIDWORKS PDM Standard, SOLIDWORKS Simulation Standard, SOLIDWORKS Simulation Professional, SOLIDWORKS Simulation Premium, SOLIDWORKS Flow Simulation, edrawings Viewer, edrawings Professional, SOLIDWORKS Sustainability, SOLIDWORKS Plastics, SOLIDWORKS Electrical Schematic Standard, SOLIDWORKS Electrical Schematic Professional, SOLIDWORKS Electrical 3D, SOLIDWORKS Electrical Professional, CircuitWorks, SOLIDWORKS Composer, SOLIDWORKS Inspection, SOLIDWORKS MBD, SOLIDWORKS PCB powered by Altium, SOLIDWORKS PCB Connector powered by Altium, and SOLIDWORKS Visualization are product names of DS SolidWorks. Other brand or product names are trademarks or registered trademarks of their respective holders. COMMERCIAL COMPUTER SOFTWARE - PROPRIETARY The Software is a "commercial item" as that term is defined at 48 C.F.R (OCT 1995), consisting of "commercial computer software" and "commercial software documentation" as such terms are used in 48 C.F.R (SEPT 1995) and is provided to the U.S. Government (a) for acquisition by or on behalf of civilian agencies, consistent with the policy set forth in 48 C.F.R ; or (b) for acquisition by or on behalf of units of the Department of Defense, consistent with the policies set forth in 48 C.F.R (JUN 1995) and (JUN 1995) In the event that you receive a request from any agency of the U.S. Government to provide Software with rights beyond those set forth above, you will notify DS SolidWorks of the scope of the request and DS SolidWorks will have five (5) business days to, in its sole discretion, accept or reject such request. Contractor/ Manufacturer: Dassault Systemes SolidWorks Corporation, 175 Wyman Street, Waltham, Massachusetts USA. Copyright Notices for SOLIDWORKS Standard, Premium, Professional, and Education Products Portions of this software Siemens Product Lifecycle Management Software Inc. All rights reserved. This work contains the following software owned by Siemens Industry Software Limited: D-Cubed 2D DCM Siemens Industry Software Limited. All Rights Reserved. D-Cubed 3D DCM Siemens Industry Software Limited. All Rights Reserved. D-Cubed PGM Siemens Industry Software Limited. All Rights Reserved. D-Cubed CDM Siemens Industry Software Limited. All Rights Reserved. D-Cubed AEM Siemens Industry Software Limited. All Rights Reserved. Portions of this software HCL Technologies Ltd. Portions of this software incorporate PhysX by NVIDIA Portions of this software Luxology, LLC. All rights reserved, patents pending. Portions of this software DriveWorks Ltd. 2011, Microsoft Corporation. All rights reserved. Includes Adobe PDF Library technology Copyright Adobe Systems Inc. and its licensors. All rights reserved. Protected by U.S. Patents.5,929,866; 5,943,063; 6,289,364; 6,563,502; 6,639,593; 6,754,382; Patents Pending. Adobe, the Adobe logo, Acrobat, the Adobe PDF logo, Distiller and Reader are registered trademarks or trademarks of Adobe Systems Inc. in the U.S. and other countries. For more DS SolidWorks copyright information, see Help > About SOLIDWORKS. Copyright Notices for SOLIDWORKS Simulation Products Portions of this software 2008 Solversoft Corporation. PCGLSS Computational Applications and System Integration, Inc. All rights reserved. Copyright Notices for SOLIDWORKS PDM Professional Product Outside In Viewer Technology, Oracle 2011, Microsoft Corporation. All rights reserved. Copyright Notices for edrawings Products Portions of this software Tech Soft 3D. Portions of this software Jean-Loup Gailly and Mark Adler. Portions of this software Dconnexion. Portions of this software Open Design Alliance. All rights reserved. Portions of this software Spatial Corporation. The edrawings for Windows software is based in part on the work of the Independent JPEG Group. Portions of edrawings for ipad copyright Silicon Graphics Systems, Inc. Portions of edrawings for ipad copyright Apple Computer Inc. Copyright Notices for SOLIDWORKS PCB Products Portions of this software 2017 Altium Limited. Document Number: PMT1812-ENG

3 Contents Introduction About This Course Prerequisites Course Design Philosophy Using this Book About the Training Files Conventions Used in this Book Windows Use of Color Graphics and Graphics Cards Color Schemes More SOLIDWORKS Training Resources Local User Groups Lesson 1: Fundamentals of Routing What is Routing? Review Lesson Types of Routes Routes Routing FeatureManager External vs. Virtual Files Virtual Components File Names in Routing Routing Setup Routing Add-in Routing Training Files Routing Library Manager Routing File Locations and Settings General Routing Settings i

4 Contents SOLIDWORKS Lesson 2: Piping Routes Lesson 3: Piping Fittings Piping Routes Typical Piping Route Route Sketch Pipes and Piping Components Pipes End Components In Line Components Other Types Routing Assembly Templates Creating a Custom Routing Assembly Template Selecting a Routing Assembly Template Creating a Piping Route Route Properties Dialog Auto Route Route Specification Templates Creating Route Specification Templates Using Route Specification Templates Adding Alternate Elbows Editing a Route Using the Route Along Relation Isolate Options Using Piping Hangers Routing Along Existing Geometry Exercise 1: Creating Templates Exercise 2: Multiple Piping Routes Piping Fittings Drag and Drop a Fitting Using Planes in Routes Split Route to Add Fittings Orienting In Line Fittings Adding Tees at Junctions Remove Tube/Pipe Creating Custom Fittings Replacing Piping Fittings Add Fitting Coverings Exercise 3: Piping Fittings Exercise 4: Piping on a Frame ii

5 SOLIDWORKS Contents Lesson 4: Tubing Routes Tubing Routes Typical Tubing Route Tubes and Tubing Components Tubes Terminal Components In Line Components Flexible Tubing with Auto Route Orthogonal Tubing Routes with Auto Route Orthogonal Tubing Solutions Bend and Spline Errors Bend Radius Too Small Export Pipe/Tube Data Using Envelopes to Represent Volumes Start Route and Add to Route Routings Tubes Through Clips Repairing Bend Errors Flip Direction Repair Route Re-route Spline Select Using Envelope Route Segment Properties Tubing Drawings Rename Save to External File Exercise 5: Orthogonal Tubing Routes Exercise 6: Flexible Tubing Routes Exercise 7: Orthogonal and Flexible Tubing Routes Lesson 5: Piping and Tubing Changes Piping and Tubing Changes Procedures for Tubing and Piping Change Route Diameter A Note About Dimensioning Route Geometry Custom Pipe/Tube Configurations Pipe Penetrations Flange to Flange Connections Pipe Spools Spools in Drawings Using Gaskets Copying Routes Mating Routes Adding Slope Editing and Removing the Slope iii

6 Contents SOLIDWORKS Editing Piping Routes Using Threaded Pipe and Fittings Deleting and Editing Route Geometry Editing for Obstructions Moving Fittings With the Triad Using Guidelines with Pipe Routes Guideline Actions Piping Drawings Pipe Drawing Drawing Tools Exercise 8: Create and Edit Threaded Pipe Routes Exercise 9: Using Pipe Spools Lesson 6: Creating Routing Components Routing Library Parts Libraries Piping Threaded Piping Tubing Assembly Fittings Cable Trays Electrical Ducting miscellaneous fittings HVAC HVAC Creating Routing Library Parts Pipe and Tube Components Pipe vs. Tube Components Copying Routing Components Creating a Pipe Using Copy and Edit Routing Library Manager Routing Component Wizard Fitting Components Using the Routing Component Wizard Routing Functionality Points Connection Points Routing Points Routing Geometry Part Validity Check Design Table Design Table Check Component Attributes Configuration Properties Part Properties Elbow Components iv

7 SOLIDWORKS Contents Lesson 7: Using P&ID Files Valve Components Assembly Routing Components Equipment Exercise 10: Creating and Using Equipment Piping and Instrumentation Pipe Systems Equipment XML File Piping and Instrumentation Tab Equipment, Pipe and Fitting Status Equipment List Adding a Pipe P&ID Report Pipe with Multiple Lines Pipes with In-line Fittings Process Drawings Exercise 11: Using P&ID Files Lesson 8: Electrical Ducting, Cable Tray, and HVAC Routes Electrical Ducting, Cable Tray, and HVAC Routes Electrical Ducting, Cable Tray and HVAC Components Rectangular and Circular Components Modifying a Routing Library Part Electrical Ducting Routes Cable Tray Routes Routing Component Orientation HVAC Routes Components Coverings In Line Duct Components Transition to Circular HVAC Routes HVAC and Ducting Drawings Exercise 12: Electrical Ducting Routes Lesson 9: Piping Skids Piping Skids Grid System Feature Initial Sketch Weldments Weldment Profiles Structural Members Adding Sketches Trim/Extend Cut-List v

8 Contents SOLIDWORKS Walk-through Animations Capture Motion Control Panel Avatar Paths Path-based Movement Recording Tools Free Movement Creating a Movie Exercise 13: Using Piping Skids Exercise 14: Creating Walk-through Animations Lesson 10: Using SOLIDWORKS Content Using SOLIDWORKS Content Adding Content Content Files Custom Library Naming Virtual Clips Components Used in the Routes Exercise 15: Using SOLIDWORKS Content Appendix A: Review Section Review of Configurations How Routing Uses Configurations A Note About File References Find References Pack and Go File Management How Libraries Use Configurations Design Tables Design Table Input and Output Review of Top Down Design Parts and Assemblies Editing Options Edit Assembly Edit Part Edit Subassembly Edit Route Assembly Feature Review of Design Library Task Pane Essentials of Using the Design Library Task Pane Directory Structure of the Design Library Review of 3D Sketching Coordinate Systems Orthogonal 3D Sketching Sketching on Selected Planes Creating planes within the sketch Splines vi