SnapLED Xtreme. Assembly and handling information. Introduction. Scope AUTOMOTIVE
|
|
- Arthur Evans
- 6 years ago
- Views:
Transcription
1 AUTOMOTIVE SnapLED Xtreme Assembly and handling information Introduction This application brief covers recommended assembly and handling procedures for SnapLED Xtreme. SnapLED Xtreme emitters leverage the time-tested reliability and robustness of the SnapLED package. The innovative lens shape demonstrates Lumileds determination to enable our customers to achieve styling differentiation at affordable system cost. Proper assembly, handling, and thermal management, as outlined in this Application Brief, ensures high optical output and long LED lumen maintenance for SnapLED Xtreme. Scope The assembly and handling guidelines in this Application Brief apply to the following products: SnapLED XTREME 300mA (A1SX-O612B13) AB125 SnapLED Xtreme Application Brief 2015 Lumileds Holding B.V. All rights reserved.
2 Table of Contents Introduction... 1 Scope Component Reference Document Description Optical Management Optical Center Focal Point and Intensity Distribution Illuminance Distribution Optical Application Examples Optical Reference Design 1: Direct Lit Diffuser Optical Reference Design 2: Direct Lit Double Diffuser Optical Reference Design 3: White Box Optical Reference Design 4: Fresnel Lens with Spreading Optic Optical Reference Design 5: Pillow Mirror Thermal Management Thermal Management and Clinch Frame Area Assembly Process Recommendations and Parameters Mechanical Files Pick and Place Nozzle Handling Precautions JEDEC Moisture Sensitivity Level About Lumileds AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 2
3 1. Component 1.1 Reference Document The SnapLED Xtreme Datasheet DS125 is available from the Lumileds website at lumileds.com. 1.2 Description As with all SnapLEDs, the SnapLED Xtreme LED package is cold-clinched onto a tinned-copper sheet (a.k.a. clinchframe ) which serves as a robust mechanical, thermal and electrical connection. SnapLED Xtreme consists of a VTF die mounted onto a nickel plated copper lead frame. The copper lead frame provides mechanical support and thermally connects the LED chip to the clinch frame. Figure 1. Electrical and thermal connection. The die is mounted onto the anode side. As a result, most of the heat from the die will be conducted to the clinch frame via the anode side. The N top side of the LED is connected with the Cathode side via a gold wire. The LED is casted with high performance, proprietary EPOXY. The EPOXY lens shields the chip from the harsh, automotive environment and distributes the light. The unique lens shape of SnapLED Xtreme enables a homogeneous distribution of the light over a planar, rectangular surface. This is in bright contrast to a conventional LED with a Lambertian radiation pattern, which requires secondary optics to achieve a similar homogenious projection. 2. Optical Management 2.1 Optical Center SnapLED Xtreme has a unique EPOXY lens (primary optic) shape. SLX provides a uniform illuminance pattern at a plane parallel to the clinch frame. The target range of illumination is rectangular. The size of the illuminated area is dependent on the distance from the secondary optic to clinch frame. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 3
4 Figure 2. SLX with illuminance at 20mm from lens base. The coordinate system of optical data is: a. origin: planar center of lens base surface on package b. z-axis: optical axis c. x-axis: along clinch leads d. y-axis perpendicular to clinch leads 2.2. Focal Point and Intensity Distribution + Z + Y + X Figure 3. SLX CAD outline with ray data and bounding box. The location of best focal point for the LED is at z=-0.3 mm. (Also called pseudo focal point.) a. This point is the best location for a virtual source replacing the LED. b. This point is the best focal point for secondary Fresnel lenses. c. This point is NOT the origin for the ray data sources provided. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 4
5 Figure 4. SLX focal point. The typical intensity distribution is shown in two cross sections: a. horizontal: through x axis b. vertical: through y-axis cd/lm Intensity (cd/lm) Angle (deg) Figure 5. Typical intensity distribution (2 cross sections). More light is distributed toward the end of the horizontal axis. This is to enable the homogeneous appearance of the LED. Optical rayset data for SLX are available upon request and can be downloaded from the Lumileds website. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 5
6 2.3. Illuminance Distribution The spread of the illuminated rectangle increases with a longer distance from the LED. Figures 6-8 illustrate the typical illuminance distributions at three different distances from the LED: 53.6 mm 14.4 mm Figure 6. Typical illuminance distribution at z = 10mm from lens base mm 28.4 mm Figure 7. Typical illuminance distribution at z = 20mm from lens base mm 42.4 mm Figure 8. Typical illuminance distribution at z = 30mm from lens base. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 6
7 The illuminance distribution dimensions can be calculated as follows: a. x-width = 5.2mm * f + 1.6mm b. y-width = 1.4mm * f mm Where f represents the distance between the optic and the lens base surface in mm. These values indicate also the recommended pitch (= distance between LEDS) of LEDs in x direction and y direction to generate a homogeneous illuminance. Figure 9. Calculating the illuminance distribution dimensions. Using the formulas indicated above, the following table indicates some typical dimensions of the SLX illuminance distribution as a result of the distance between the optic and the SLX lens base as well as the distance to the SLX clinch frame: Table 1. Lit Up Area as Function of Distance Between LED and Lens. DISTANCE F TO LENS BASE (IN MM) DISTANCE D TO CLINCH FRAME (IN MM) FULL WIDTH W IN X-DIRECTION (IN MM) FULL WIDTH H IN Y-DIRECTION (IN MM) AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 7
8 2.4. Optical Application Examples SLX is an innovative new lens shape. As such the expectation is that SLX will lead to new optical applications architectures that are not designed yet on the road today. SLX can also help to create existing optical applications with less number of components and less optical complexity in the secondary optics. Here is an overview of optical application architectures for which SLX is a well suitable LED (the possibilities are not limited to this list): a. Direct lit, single diffuser. b. Direct lit, double diffuser c. Indirect lit, white box d. Direct lit, Fresnel lens with spreading optics e. Indirect lit, pillow mirror Please find a summary of each optical architecture explained in below table. In the remainder of this chapter, the specifics of each optical architecture will be explained in more detail. Table 2. Example of Optical Reference Designs for SnapLED Xtreme. ARCHITECTURE ELEMENTS APPLICATION REMARK a. Direct Lit, Single Diffuser LED, Diffuser Tail Difficult to maintain uniformity in overlap regions due to extreme incidence angles. b. Direct Lit, Double Diffuser LED, First Diffuser, Second Diffuser Tail Good to form lit 3D sculptures with glowing lit appearance works well with 3D-arrangements, orient LED axis perpendicular to target surface. c. Indirect lit, white box LED, Diffuse Reflector, Diffuser Tail Avoid direct view on LED, arrange primary lit surface perpendicular to LED-axis works well with 3D-arrangements. d. Direct Lit, Fresnel lens with spreading optics LED, Fresnel lens, spreading element Stop, Turn, Rear Fog, Tail Set focal point of Fresnel lens to best focal point of LED, spreading optics can be cushion lenses, diffuser or cushion mirror. In 3D arrangement, orient LED-axis and Fresnel-Lens axis at HV. Use stepped arrangement to follow 3D contour with spreading optics on cover. e. Indirect lit, pillow mirror LED-cushion mirror Stop, Turn, Rear Fog, Tail Choose plane base surface perpendicular to LED axis. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 8
9 Optical Reference Design 1: Direct Lit Diffuser The first optical reference solution for SnapLED Xtreme is the direct lit diffuser. Although it is a very cheap and easy solution, it does not produce highly uniform lit appearance. Figure 10. Example of direct lit diffuser. Elements that are used in this solution: 1. SnapLED Xtreme LEDs 2. Diffuse Screen. Can be either from surface structure or volume scattering material. 3. Diffuse side walls for further uniformity Characteristics of this solution are: simple architecture (Just LED and diffuser) cheap system (least number of components) difficult for uniform luminance strong effects in overlapping regions high risk for directional effects suitable for tail function If this solution is chosen, please take care to: have double scattering layer or volume diffuser for screen to reduce effects of overlapping and directional effects provide side walls with diffuse reflection provide alignment of LEDs parallel to target surface Figure 11. Example direct lit diffuser lit up appearance. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 9
10 Optical Reference Design 2: Direct Lit Double Diffuser The second optical reference solution overcomes the disadvantages of the first solution by adding a diffuser in between the LED and the visible optic. Figure 12. Example setup of direct lit double diffuser demonstrator. Elements that are used in this solution: 1. SnapLED Xtreme LEDs 2. Double layer of diffuse screen. Can be either from surface structure or volume scattering material. 3. Diffuse side walls Characteristics of this solution are: simple to design architecture can build glowing sculptures simple uniform luminance for tail function If this solution is chosen, please take care to: avoid leakage from first chamber have strong scattering to reduce directional effects have first diffuser lit uniformly by LEDs have second diffuser following contour of first diffuser provide side walls with diffuse reflection up to first diffuser provide alignment of LEDs parallel to first surface Figure 13. Lit up appearance direct lit double diffuser demonstrator. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 10
11 Optical Reference Design 3: White Box In contrast to the first two reference designs which are more directly illuminated diffuse optics, the third reference design is using the SnapLED Xtreme light in an indirect way via lighting up a diffuse material. Figure 14. Example of white box demonstrator. Elements that are used in this solution: 1. SnapLED Xtreme LEDs 2. Diffuse white box reflector 3. Diffuse or transparent cover Characteristics of this solution are: simple to design architecture can provide uniform appearance for 3D objects requires certain minimal volume tail function If this solution is chosen, please take care to: provide bezel to block direct sight to the LEDs align the reflector surface parallel to the clinch frame surface have first diffuser lit uniformly by LEDs provide diffuse cover for optimal uniformity Figure 15. Lit up appearance white box demonstrator. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 11
12 Optical Reference Design 4: Fresnel Lens with Spreading Optic While the previous reference designs are most suitable for tail function designs, the fourth reference designs is best suitable for Stop function of RCL or CHMSL. It is much more efficient than previous designs and depending upon the chosen optic, does not compromise much from the homogenous lit appearance. Figure 16. Example of setup fresnel lens with spreading optic demonstrator. Elements that are used in this solution: 1. SnapLED Xtreme LEDs 2. Fresnel lens for collimation 3. Spreading optics, can be diffusion layer or cushion lenses In many cases 2 and 3 can be achieved in one lens, using inner side of lens for fresnel collimation and outer side of lens for spreading optics. Characteristics of this solution are: straight forward to design architecture provides high intensity bundles good uniformity with moderate stitching effects good for retrofitting existing CHMSL for stop and turn function, CHMSL, (tail) If this solution is chosen, please take care to: provide parallel alignment between Fresnel lens and LED align lenses and LED along optical axis use controlled spreading use stepped alignment for slanted arrangement block stray light in stepped arrangement Figure 17. Lit up appearance of fresnel lens with spreading optic demonstrator. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 12
13 Optical Reference Design 5: Pillow Mirror This design is most similar to design 3, the wide box with the exception that it uses a reflector instead of a diffuse material. pillow Figure 18. Example of pillow mirror demonstrator. Elements that are used in this solution: 1. SnapLED Xtreme LEDs 2. Pillow mirror for redirection and spread 3. Optional a diffuse lens can be used Characteristics of this solution are: straight forward to design architecture provides high intensity bundles moderate uniformity with dotted design offering pillow mirror appearance with fewer LEDs for stop and turn function, CHMSL, (tail) If this solution is chosen, please take care to: provide parallel alignment between LED and pillow mirror base plane avoid blocking of reflected light by LED or clinch frame avoid direct sight of LED pillow Figure 19. Lit up appearance of pillow mirror demonstrator. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 13
14 3. Thermal Management 3.1. Thermal Management and Clinch Frame Area Since SnapLED Xtreme is N-up chip and P side is mounted on the lead frame, most of the heat of the LED is conducted to the Anode side of the LED. To estimate the case-to-ambient thermal resistance for the SnapLED Xtreme, the following formula can be used: R qca (K/W) = e A where K/W is the surface area of the clinch frame (anode side) oriented vertically. This formula was derived from the graph in Figure 20 which is based on benchtesting of actual devices measuring case to ambient thermal resistance at different anode clinch frame area sizes: Figure 20. Rth clinchframe to ambient as function of clinchframe area. To estimate the thermal resistance for a clinchframe system oriented horizontally, add 2.9K/W. For replication of the thermal benchtest Table 3 shows the dimensions used for measuring the thermal resistance with different anode clinch frame area s. Figure 21. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 14
15 Table 3. Dimensions Used for Measuring Thermal Resistance. R Width Length Area 300 Sample ma (mm 2 ) (mm 2 ) (mm 2 ) ( C * W -1 ) E1a E2a E3a E4a E5a E6a E7a Assembly Process Recommendations and Parameters 4.1. Mechanical Files Mechanical drawings for SLX (3D CAD) are available from the Lumileds website or upon request. For details please contact your sales representative Pick and Place Nozzle Figure 22 and 23 show the recommended Pick and Place nozzle dimensions. Figure 22. Top view of recommended pick and place nozzle. AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 15
16 Figure 23. Side view of recommended pick and place nozzle dimensions Handling Precautions Like all electrical components, there are handling precautions that need to be accounted for when setting up assembly procedures. The following cautions are noted for SLX: Electrostatic Discharge (ESD) protection Electrostatic Discharges, rapid transfers of charges between two bodies due to an electrical potential difference between those bodies, can cause unseen damage to electronic components. In LED devices, ESD events can result in a slow degradation of light output and/or early catastrophic failures. Common causes of ESD include the direct transfer of charges from the human body or from a charged conductive object to the LED component. In order to test the susceptibility of LEDs to these common causes of ESDs, three different models are typically used: Human Body Model (HBM) Machine Model (MM) Charged Device Model (CDM) Lumileds LEDs have been independently verified to successfully pass ESD tests for both HBM, MM and CDM at the highest AEC recommended test voltages of +/- 8000V, +/- 400V and +/-1000V, respectively. Nevertheless, Lumileds strongly recommends that customers adopt handling precautions for LEDs similar to those that are commonly used for other electronic surface mount components which are susceptible to ESD event. Additional external ESD protection for the LED is needed, if the LED is assembled or handled in environments which are not ESD protected, or if exposed to higher ESD voltages and discharge energy, e.g. as described in ISO or IEC (severity level IV). For details please contact your sales representative. 5. JEDEC Moisture Sensitivity Level Since SnapLED Xtreme is assembled via cold mechanical clinching and the LEDs are not exposed to thermal shocks, as from solder processes moisture levels are not of concern for the SLX LEDs. RoHS COMPLIANT AB125 SnapLED Xtreme Application Brief Lumileds Holding B.V. All rights reserved. 16
17 About Lumileds Lumileds is the light engine leader, delivering innovation, quality and reliability. For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive, consumer and illumination markets. Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people see the world around them. To learn more about our portfolio of light engines visit lumileds.com Lumileds Holding B.V. All rights reserved. LUXEON is a registered trademark of the Lumileds Holding B.V. in the United States and other countries. lumileds.com AB125 SnapLED Xtreme Application Brief Neither Lumileds Holding B.V. nor its affiliates shall be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Lumileds Holding B.V. and/or its affiliates have attempted to provide the most accurate information and data, the materials and services information and data are provided as is, and neither Lumileds Holding B.V. nor its affiliates warrants or guarantees the contents and correctness of the provided information and data. Lumileds Holding B.V. and its affiliates reserve the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data.
A range of CCT options available in 70CRI (4000K 5700K) 150mm length x 45mm width footprint designed for use with standard third party optics
ILLUMINATION LUXEON XR-TX High performance LED modules with extreme efficacy for robust lighting designs LUXEON XR-TX products are LED modules optimized for lighting applications requiring high efficacy
More informationLUXEON Z UV. design freedom in the industry s only micro-package UV LED GENERAL ILLUMINATION
GENERAL ILLUMINATION LUXEON Z UV design freedom in the industry s only micro-package UV LED At 1/5 th the size of other ultraviolet and violet LEDs, LUXEON Z UV LEDs, a SMT device, can be assembled in
More informationLUXEON Versat 3030 PCA 150
AUTOMOTIVE LUXEON Versat 3030 PCA 150 Industry-leading solutions for exterior automotive lighting LUXEON Versat is perfect for high-volume assembly where consistency is never compromised. This family of
More informationLUXEON FX Plus Cool White
AUTOMOTIVE LUXEON FX Plus Cool White Industry-leading CSP solutions for low and high beam lamps LUXEON FX Plus Cool White LEDs, with their Chip Scale Packaging (CSP) form factor, are designed to support
More informationLUXEON Versat 3030 CW 150
AUTOMOTIVE LUXEON Versat 3030 CW 150 Industry-leading solutions for exterior automotive lighting LUXEON Versat is perfect for high-volume assembly where consistency is never compromised. This family of
More informationAutomotive forward lighting source
AUTOMOTIVE LUXEON Altilon SMD Automotive forward lighting source LUXEON Altilon SMD is specifically designed and tested to meet and exceed expectations for reliability, performance, and lifetime in automotive
More informationLUXEON XR Linear LED module on an ultra-slim and rigid substrate enabling high efficacy designs ILLUMINATION
ILLUMINATION LUXEON XR-3020 Linear LED module on an ultra-slim and rigid substrate enabling high efficacy designs LUXEON XR-3020 products are ultra-slim linear LED modules optimized for narrow (20mm wide)
More informationLUXEON Neo 0.5mm 2. Industry-leading solutions for matrix head-lighting AUTOMOTIVE. LUXEON Neo LEDs, with their miniaturized form factor and low
AUTOMOTIVE LUXEON Neo 0.5mm 2 Industry-leading solutions for matrix head-lighting LUXEON Neo LEDs, with their miniaturized form factor and low mechanical tolerances, are the ideal LED components for matrix
More informationLUXEON UV Superior Flux Density, Efficiency and Design Freedom
LUXEON UV Superior Flux Density, Efficiency and Design Freedom in the Industry s Only Micro-Package UV LED Introduction At 1/5 the size of other ultraviolet and violet LEDs, LUXEON UV is the industry s
More informationLUXEON Altilon Intense 1x4
AUTOMOTIVE LUXEON Altilon Intense 1x4 Industry-leading solutions for compact high performance headlight systems LUXEON Altilon Intense LEDs, with their miniaturized form factor, are designed to support
More informationPRELIMINARY. LUXEON UV Superior Flux Density, Efficiency and Design Freedom. Introduction. Benefits. Features. Key Applications
LUXEON UV Superior Flux Density, Efficiency and Design Freedom in the Industry s Only Micro-Package UV LED Introduction At 1/5 the size of other ultraviolet and violet LEDs, LUXEON UV is the industry s
More informationRetail lighting that makes an impact
General Illumination LUXEON CoB with CrispWhite Technology Line Retail lighting that makes an impact LUXEON CoB with CrispWhite Technology creates the most impactful retail lighting ever available, by
More informationNO LONGER ORDERABLE LUXEON HR30. Superior lumen maintenance and corrosion resistance in punishing conditions
ILLUMINATION For NEW designs consider these replacement products: LUXEON 3030 2D LUXEON 5050 LUXEON HR30 is specifically designed and tested for use in the most demanding environments and conditions. With
More informationUniform, high efficacy and easy to design array
Illumination LUXEON CoB Core Range (Gen 3) Uniform, high efficacy and easy to design array The third generation of LUXEON CoB represents a new breakthrough for arrays. The efficacies will be >160 lm/w
More informationUniform, high efficacy and easy to design array
Illumination LUXEON CoB Core Range Uniform, high efficacy and easy to design array LUXEON CoB represents a new breakthrough for arrays. The efficacies will be >160 lm/w for 70CRI and 80CRI products. Due
More informationFeatures Benefits Key Applications
LUXEON 3030 2D Hot color targeted 6V QFN package delivering high flux Introduction The LUXEON 3030 2D mid-power LED is the first hot color targeted mid power LED. The LUXEON 3030 2D uses industry standard
More informationHigh efficacy in a 3535 package with full range of CCTs and CRIs
Illumination LUXEON 3535L Line High efficacy in a 3535 package with full range of CCTs and CRIs The LUXEON 3535L Line boasts the efficacy and reliability required by the indoor and outdoor illumination
More informationNOT RECOMMENDED FOR NEW DESIGNS
For NEW designs consider these replacement products: LUXEON CoB with CrispWhite Technology (Gen ) LUXEON CoB with CrispWhite Technology Line Retail lighting that makes an impact The LUXEON CoB with CrispWhite
More informationRange High Density. Double the flux in the same form factor. LUXEON CoB Core Range High Density focuses on achieving the highest
Illumination LUXEON CoB Core Range High Density Double the flux in the same form factor LUXEON CoB Core Range High Density focuses on achieving the highest Center Beam Candle Power (CBCP). With a focus
More informationLUXEON XR-3535L Turnkey solution on a rigid substrate enabling high efficacy designs
LUXEON XR-3535L Turnkey solution on a rigid substrate enabling high efficacy designs Introduction LUXEON XR is a family of fully integrated solutions optimized for lighting applications requiring linear
More informationLUXEON Hot-color targeted industry standard package for uniform light ILLUMINATION
ILLUMINATION LUXEON 3014 Hot-color targeted industry standard package for uniform light LUXEON 3014 is an industry standard compatible footprint for ease of installation into existing 3014 sockets and
More informationLUXEON UV U Line. Assembly and Handling Information. Introduction. Scope ILLUMINATION
ILLUMINATION LUXEON UV U Line Assembly and Handling Information Introduction This application brief addresses the recommended assembly and handling procedures for LUXEON UV U Line emitters. Proper assembly,
More informationNO LONGER ORDERABLE LUXEON D. High flux in a 3535 package with full range of CCTs and CRIs. For NEW designs consider this replacement product:
ILLUMINATION For NEW designs consider this replacement product: LUXEON 3030 2D LUXEON 3535 2D High flux in a 3535 package with full range of CCTs and CRIs LUXEON 3535 2D is a mid power LED delivering optimized
More informationLUXEON CZ Color Line. Maximum punch in any application ILLUMINATION. LUXEON CZ Color Line is an optically advanced portfolio of Color and
ILLUMINATION LUXEON CZ Color Line Maximum punch in any application LUXEON CZ Color Line is an optically advanced portfolio of Color and White LEDs. Designed to maximize punch, the LUXEON CZ Color Line
More informationTable of Contents. DS170 LUXEON CoB with FreshFocus Technology Product Datasheet Lumileds Holding B.V. All rights reserved.
Illumination with FreshFocus Technology Accentuating freshness and overall visual appeal, making food irresistible The with FreshFocus Technology creates the most impactful lighting ever available by accentuating
More informationSquare With 5Ф Dome 4 Lead Super Yellow LED Technical Data Sheet. Part No.: LL-U48UY3C-Y2-4D
Square With 5Ф Dome 4 Lead Super Yellow LED Technical Data Sheet Part No.: LL-U48UY3C-Y2-4D Spec No.: BNH116 X85 Rev No.: V.3 Date: Jan./25/26 Page: 1 OF 7 Features: Fewer LEDs required. Low profile. Lowers
More informationLucidShape MacroFocal Surfaces
WHITE PAPER LucidShape MacroFocal Surfaces Paper #007-2 Author Peter Sommer Synopsys Abstract State-of-the-art lighting systems in motor vehicles require new geometries to achieve the required lighting
More informationFHS SERIES LENSES for LUXEON TM LEDs: LUXEON I, III, and V, STAR and EMITTER. High efficiency Available in 4 different beams Patent Pending
FHS SERIES LENSES for LUXEON TM : LUXEON I, III, and V, STAR and EMITTER High efficiency Available in 4 different beams Patent Pending The FHS series offers a complete range of lenses especially designed
More informationMultiple colors, a single focal length
Illumination LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
More informationProduct Data Sheet DS60 OLMB-40X000 50X000 57X000
Bridgelux OLM Series Product Data Sheet DS60 OLMB-40X000 50X000 57X000 1 Introduction OLM Series Bridgelux OLM Series modules enable a simple and easy way to develop outdoor luminaires. The modules deliver
More informationPhilips Lumileds 5630 Mid-Power LEDs
Illumination Portfolio Mid-power 5630 LEDs Optimized solutions for illumination applications Technical Datasheet DS201 Philips Lumileds 5630 Mid-Power LEDs Illumination Portfolio Introduction The Philips
More informationTable of Contents. DS144 LUXEON C Color Line Product Datasheet Lumileds Holding B.V. All rights reserved.
ILLUMINATION LUXEON C Color Line Multiple colors, a single focal length The LUXEON C Color Line is an optically advanced portfolio of Color and White LEDs. Designed for flawless color mixing, LUXEON C
More informationMEI. Features: Descriptions: Applications:
Features: Low Power consumption. High efficiency and low cost. Good control and free combinations on the colors of LED lamps. Good lock and easy to assembly. Stackable and easy to assembly. Stackable vertically
More informationP-LED EALP03SXABA0. Lead (Pb) Free Product - RoHS Compliant
Lead (Pb) Free Product - RoHS Compliant Feature Low profile. Uniform color. High flux output. Colorless clear resin. Brightness: 1125 to 2850 mlm at 30mA. Packaged in tubes for use with automatic insertion
More informationLuckylight. 5mm Round With Flange Type. White LED. Technical Data Sheet. Part No.: 584WC2C-W5-1PC-P
5mm Round With Flange Type White LED Technical Data Sheet Part No.: 584WC2C-W5-1PC-P Spec No.: B52A X265 Rev No.: V.3 Date: Aug./5/27 Page: 1 OF 9 Features: Popular T-1 3/4 diameter package. Bulk,Available
More informationLuckylight. 2mm Tower Type. White LED. Technical Data Sheet. Part No.: 204WM2A-W2-3N
2mm Tower Type White LED Technical Data Sheet Part No.: 24WM2A-W2-3N Spec No.: B1 X565 Rev No.: V.3 Date: Jun./2/28 Page: 1 OF 9 Features: 2mm Tower. Wide viewing angle=4. Available on tape and reel Emission
More informationLAMP /F2C4-FHNO/R23
1224-15/F2C4-FHNO/R23 Features High luminous power Typical chromaticity coordinates x=0.258, y=0.228 according to CIE1931 Bulk, available taped on Ammo. ESD-withstand voltage: up to 4KV The product itself
More informationDescription. Applications
3.5x3.5 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features White SMD package, silicone resin. Low thermal resistance. Compatible
More informationEpigap FAQs Part packges and form factors typical LED packages
3. packges and form factors 3.1. typical LED packages Radiation from LEDs is generated by a semiconductor chip mounted in a package. LEDs are available in a variety of designs significantly influencing
More informationGeneration 1 HortiLum COB LED Series
HortiLum COB LED Series Product Datasheet Generation 1 HortiLum COB LED Series COB Arrays Optimized for Plant Growth Features: Optimized spectrum for maximum Photosynthetic Photon Flux (PPF) Table of Contents
More informationCXM-9 COB Arrays White LED
CXM-9 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Part Numbers AA00...5 Part Numbers
More informationThrough Hole Lamp Product Data Sheet LTL-M12RG1H300Q-CS LITE-ON DCC RELEASE
Product Data Sheet Spec No. :DS20-2017-0116 Effective Date: 11/17/2017 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei
More information3mm Advanced Super Flux LEDs T4C-4PRB
3mm Advanced Super Flux LEDs Lead (Pb) Free Product - RoHS Compliant Feature RoHS compliant. Piranha package. Colorless clear resin. Low thermal resistance Packaged in tubes for Automatic Insertion Equipment.
More informationStudio. CVM Studio COB Arrays LED Entertainment Lighting. CVM Product Datasheet Preliminary. Features: Table of Contents.
Studio CVM Product Datasheet CVM Studio COB Arrays LED Entertainment Lighting Features: Table of Contents Technology Overview.... 2 Test Specifications... 2 Chromaticity Bins.... 3 Product Ordering & Shipping
More informationDescriptions. Applications
3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535QB25Z1S Blue Features White SMD package, silicone resin. Low thermal
More informationFT3 Series Tri-lenses for LUXEON TM K2 LEDs
FT3 Series Tri-lenses for LUXEON TM K2 LEDs High efficiency Available in 3 different beams The FT3 series offers 3 lens assemblies specifically designed for the Lumileds (1) LUXEON K2 LEDs. A software-optimized
More informationTechnical Data Sheet Oval POWER LED
Features. High Flux Output.. Designed for High Current Operation.. Low Thermal Resistance Rth(junction to lead):120 C/W. Packaged in Tubes for Use with Automatic Insertion Equipment..The product itself
More informationFC Lens series for Cree XLamp 7090 XR and XR-E LEDs
FC Lens series for Cree XLamp 7090 XR and XR-E LEDs High efficiency 4 beams available Easy assembly The FC lens offers low-profile lenses specifically designed for the XLamp 7090XR and XR-E LEDs (1) from
More information5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions
5.0mm x 5.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5051XQR412ZXS-N1 Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Suitable for all SMT assembly and solder
More informationLAMP UTC/S400-X9-L
Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. The product itself will remain within RoHS compliant
More informationCXM-9 COB Arrays White LED
CXM-9 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Part Numbers AA00...5 Part Numbers
More informationE3S-A. Built-in Amplifier Photoelectric Sensor (Medium Size) Ordering Information. Built-in Amplifier Photoelectric Sensors. Horizontal. 7 m.
Built-in Amplifier (Medium Size) ES-A CSM_ES-A_DS_E Be sure to read Safety Precautions on page 0. Ordering Information Built-in Amplifier s Red light Infrared light Sensing method Appearance Connection
More informationGeneration 3 CIM-9 COB Arrays White LED
Preliminary Generation 3 CIM-9 COB Arrays White LED Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering & Shipping Part Number
More informationGeneration 3 CLM-14 COB Arrays White LED
Generation 3 CLM-14 COB Arrays White LED Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering & Shipping Part Numbers..............4
More informationGeneration 2 CXM-27 COB Arrays White LED
CXM-27 Product Datasheet Generation 2 CXM-27 COB Arrays White LED Features: High lumen output and efficacy typical Table of Contents Over 8,300 lm, over 134 LPW @ 3000K, 80CRI, 85ºC Technology Overview......2
More informationGeneration 3 CXM-9 COB Arrays White LED
Generation 3 CXM-9 COB Arrays White LED Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering & Shipping Part Number nomenclature.4
More informationDescriptions. Applications
3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535SEL1Z1S Hyper Orange Features White SMD package, silicone resin. Low
More informationSPEC NO: DSAM4545 REV NO: V.2B DATE: MAR/29/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
3.5x2.8 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KA-3529ASYLZ4S Super Bright Yellow Features Single color. Suitable for all
More informationLAMP /F1C5-1RTA
Features Popular T-1 3/4 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product
More informationMicro Structures Design of OLED Tail Lamp Abstract 1. Introduction
Micro Structures Design of OLED Tail Lamp Yao-Min Ho, Jih-Tao Hsu Automotive Research Testing Center No.6, Lugong S.7th Rd.,Lugang,Changhua County 50544,Taiwan(R.O.C) E-mail: yaomin@artc.org.tw Abstract
More informationFLP Lens Series for Philips Lumileds LUXEON TM LEDs
FLP Lens Series for Philips Lumileds LUXEON TM LEDs High efficiency Available in 5 different beams Easy assembly The FLP lens series offers five lenses specifically designed for the Philips Lumileds LUXEON
More informationGeneration 3 CXM-11 LED White COB Arrays
CXM-11 Gen 3 Product Datasheet Generation 3 CXM-11 LED White COB Arrays Features: Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product Ordering
More informationLuckylight. 2mm Tower Type. Yellow LED. Technical Data Sheet. Part No.: 204YC2A-2Y
2mm Tower Type Yellow LED Technical Data Sheet Part No.: 24YC2A-2Y Spec No.: B1 X565 Rev No.: V.3 Date: Oct./12/26 Page: 1 OF 7 Features: 2mm Tower. High efficiency. Selected minimum intensities. Available
More informationGeneration 3 CLM-9 COB Arrays White LED
Preliminary Generation 3 CLM-9 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Part Numbers...5
More informationARPL-1W White REFLOW (100 Lm, 6500K)
ARPL-1W White REFLOW (100 Lm, 6500K) Features Long operating life Highest flux Available in White:2500K-25000K Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps
More informationHarvatek Surface Mount LED Data Sheet HT-191 Series
Harvatek Surface Mount LED Data Sheet Official Product Product: Data Sheet No. Tentative Product **************** June 19, 2013 Version of 1.0 Page 1/23 DISCLAIMER... 3 PRODUCT SPECIFICATIONS... 4 ATTENTION:
More informationMonsoon Series. Data Sheet. High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules. Features:
Monsoon Series High Power Laser Diode Bar on Micro-Channel Cooler and Multi-Bar Modules Features: Mounted 10mm laser diode bar, various standard bar configurations (custom bar configurations available
More informationCXM-6 COB Arrays White LED
CXM-6 COB Arrays White LED Features: Table of Contents Technology Overview...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux Range. 5 Product Flux Bins...6 Operating
More informationCHM-27 COB Arrays White LED
CHM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Part number nomenclature. 4 Ordering part number and flux spec... 5 Operating
More information3.5x2.8mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions
3.5x2.8mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF3529LSEEZGKQBKS Features Outstanding material efficiency. Low power
More informationFHS LENSES SERIES. High efficiency. Available in 4 different beams. Patent Pending. The FHS series offers a complete range of lenses TM
High efficiency Available in 4 different beams Patent Pending The FHS series offers a complete range of lenses specially designed for the LUXEON LED from (1) Lumileds. Both Batwing and Lambertian LUXEON
More informationLSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.55 mm LED Lamp
LSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.55 mm LED Lamp LSM0603453V Green SMD LED. High intensity light output, low power consumption, low profile and wide viewing angle. Application Wearable
More informationGeneration 3 CXM-27 COB Arrays White LED
Generation 3 CXM-27 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Product Typical Flux
More informationF360L-4C-S Side-Emitter Lens for Philips Lumileds TM LEDs
High efficiency High-temperature material Easy assembly The F360L-4C-S lens is specifically designed for the Philips Lumileds LEDs. F360L-4C-S Side-Emitter Lens for Philips Lumileds TM LEDs A software-optimized
More informationPart Number: XZMYLA92S-4. Features. Applications. Package Schematics. 3.5x3.5 mm SMD CHIP LED LAMP
Features 3.5mm X 3.5mm X 1.15mm SMD LED Zener diode provided for ESD Protection IR-reflow compatible Ideal for accent lighting Standard Package: 2,000pcs / Reel MSL (Moisture Sensitivity Level): 2a RoHS
More informationGeneration 3 CXM-14 COB Arrays White LED
Generation 3 CXM-14 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Customer Part Numbers...5
More informationLSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.60 mm LED Lamp
LSM0603 Series 0603 SMD LED packages 1.6 x 0.8 x 0.60 mm LED Lamp LSM0603443V White SMD LED. High intensity light output, low power consumption, low profile and wide viewing angle. Application Wearable
More informationN0Y03 3L90. Features. ons. Characteristics Maximum Rating
N0Y03 3L90 Outline (L* H): 3.85*5.32 mm Goodd thermal dissipation & optical uniformity Table of Contents Maximum Rating2 Typical Product Characteristics3 Range of Bins3 Directive Characteristics4 ElectronicOptical
More informationCHM-11-XH00 LED High Density White COB Array
CHM-11 Product Datasheet CHM-11-XH00 LED High Density White COB Array Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part
More informationIntroduction. Experiment A: Snell s Law. Physics 1CL REFLECTION AND REFRACTION OF LIGHT Summer Session II 2010
Introduction This laboratory is a quantitative investigation of the reflection and refraction of light off optical interfaces. An optical interface is a boundary between two transparent media of different
More informationDiscontinued. RoHS Compliant. Product Overview. Features
Product Overview An electrically isolated star capable of delivering over 140 lumens per LED, the Star K2 offers greater application capabilities because of its size and ease of integration into fixtures
More informationBridgelux Vero 10 Array Series
Bridgelux Vero 10 Array Series Product Data Sheet DS30 BXRC-27x1000 30x1000 35x1000 40x1000 50x1000 Introduction Vero Vero represents a revolutionary advancement in chip on board (COB) light source technology
More informationHSMF-C127. Data Sheet. Tri-Color Side-View ChipLED. Features. Description. Applications
Data Sheet HSMF-C127 Description The HSMF-C127 is a side-emitting tri-color RGB LED chipled. This surface-mount chipled is available in 3.2-mm 1.5-mm footprint. Its wide viewing angle allows good color
More informationGeneration 3 CHM-9 COB Arrays White LED
Generation 3 CHM-9 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Part Numbers...5 Operating
More informationPTVSxS1UR series. 1. Product profile. 400 W Transient Voltage Suppressor. 1.1 General description. 1.2 Features and benefits. 1.
Rev. 3 10 January 2011 Product data sheet 1. Product profile 1.1 General description 400 W unidirectional Transient Voltage Suppressor (TVS) in a SOD123W small and flat lead low-profile Surface-Mounted
More informationCVM Studio COB Arrays
CVM Studio COB Arrays LED Entertainment Lighting Features: Table of Contents Technology Overview.... 2 Test Specifications... 2 Chromaticity Bins.... 3 Product Ordering & Shipping Part Numbers.... 4 Product
More informationCHM-9 COB Arrays White LED
CHM-9 COB Arrays White LED Features: Table of Contents Technology Overview...2 Test Specifications...2 Chromaticity Bins...3 Product Ordering & Shipping Part Numbers...4 Part Numbers AA00...5 Part Numbers
More informationGeneration 2 CHM-9-XH20 LED High Density White COB Array
Generation 2 CHM-9-XH20 LED High Density White COB Array Features: High lumen output, density Table of Contents Technology Overview......2 Test Specifications.........2 Chromaticity Bins..........3 Product
More informationLucidShape Procedural Surfaces for Lens and Reflector Applications
WHITE PAPER LucidShape Procedural Surfaces for Lens and Reflector Applications Paper #006-2 Author Peter Sommer Synopsys Abstract State-of-the-art lighting systems in motor vehicles require new geometries
More informationThrough Hole Lamp Product Data Sheet LTW-2V3DS3Z-002A Spec No.: DS Effective Date: 04/08/2014 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet Spec No.: DS20-2014-0063 Effective Date: 04/08/2014 Revision: - LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung
More informationGeneration 3 CXM-22 COB Arrays White LED
CXM-22 Product Datasheet Generation 3 CXM-22 COB Arrays White LED Features: High lumen output and efficacy typical Table of Contents Over 8,280 lm, 148 LPW @ 3000K, 80 CRI, Tj = 85ºC Technology Overview......
More informationPart Number: XZDG10X146S. Features. Package Schematics. 5.0mm x 5.0mm SURFACE MOUNT LED LAMP
Features 5.0mm X 5.0mm X 1.2mm SMD LED Zener diode provided for ESD protection IR-reflow compatible Standard Package: 500pcs / Reel MSL (Moisture Sensitivity Level): 3 RoHS compliant ATTENTION OBSERVE
More information300 V, 100 ma PNP high-voltage transistor
SOT89 Rev. 6 27 September 2011 Product data sheet 1. Product profile 1.1 General description PNP high-voltage transistor in a medium power and flat lead SOT89 (SC-62) Surface-Mounted Device (SMD) plastic
More informationCAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling.
Rev. 2 28 September 2010 Product data sheet 1. Product profile 1.1 General description Hybrid high dynamic range amplifier module operating at a supply voltage of 24 V (DC) in an SOT115J package. The module
More information5.0mm x 6.0mm SURFACE MOUNT LED LAMP. Description. Features. Package Dimensions
5.0mm x 6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AAAF5060QBFSURZGS Features Chips can be controlled separately. Suitable
More informationFeatures. ons. Maximum Rating Color. ESD level Applicatio
N0A03L78 Outline (L* H): :3.85*5.32mm Goodd thermal dissipation & optical uniformity Table of Contents Maximum Rating 2 Typical Product Characteristics3 Range of Bins 3 Color Coordinate Comparison 4 Directive
More informationP-LED EALP03SXDWA0. Features. Descriptions. Applications. Automotive Lighting. Electronic Signs and Signals. Special Lighting application
Features. High Flux Output.. Low Profile.. Low Thermal Resistance.. Low Power Consumption. The phosphor filled in the reflector converts the blue emission of InGaN chip to ideal white..typical chromaticity
More information5.0X6.0mm SURFACE MOUNT LED LAMP. Features. Description. Package Dimensions
5.0X6.0mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA5060ZGS/E Green Features Single color. Suitable for all SMT assembly
More informationLAMP UTC/S400-X9
Features Popular T-1 round package High luminous power Typical chromaticity coordinates x=0.29, y=0.28 according to CIE1931 Bulk, available taped on reel. ESD-withstand voltage: up to 4KV The product itself
More information2.2x1.4mm SURFACE MOUNT LED LAMP. Descriptions. Features. Package Dimensions
2.2x1.4mm SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA2214VR4D1S-C1 Cool White Features 2.2mm x 1.4mm, 1.3mm high. Low power
More information