FPVMODEL. Rescue-2. Integrated with 1 OX Zoom HD Camera Intended for Search and Rescue Missions USER MANUAL

Transcription

1 FPVMODEL Rescue-2 USER MANUAL Integrated with 1 OX Zoom HD Camera Intended for Search and Rescue Missions FP IU n-= Copyright FPVMODEL LIMITED

2 WARNING AND DISCLAIMER Make sure not to adjust the gimbal or change it's mechanical structure by yourself. Be sure to install the camera to gimbal before powering on and installing the gimbal onto the aircraft. Please do not add other peripherals for the camera (Filter, Hood, etc.), so as to avoid the gimbal performance degradation or internal line road damage. When flying with Rescue-2 gimbal,please make sure your vehicle master flight control system work in the safest state. We strongly recommend that removing the propellers on the aircraft while setting up PTZ. Use non-power battery powered gimbal and keep children away from the preset flight region. Our company can not control the user's specific use, installation, assembly, modification ( including the use of non-specified parts ), and improper use. Direct or indirect damage or injury that caused by the above, our company will not be liable for any loss and liability. THINGS TO REMEMBER Aerial photography with a 10x zoom gimbal camera is supposed to be fun and there's a lot to learn. If you're having a difficult time, take a break and do some research. Don't be afraid to ask for help in Facebook groups, RC related forums, or send us a message directly. If you're new to the use of gimbal it can be trying and at times frustrating. Other flyers advice can be your best source to ensuring your operation over the gimbal is as good as it can be. For those of you whom are not new to flying with a professional gimbal...remember you were once and any help you can give others is always appreciated. We see you guys out on the forums and Facebook groups offering your knowledge to others that don't have as much. Much respect! Thanks for the input.

3 BRIEF INTRODUCTION Features: All in One Design with Built-in 10x zoom HD camera. Use BaseCam SimpleBGC 32-bit controller Encoder. Compact structure yet easy to install. One Key Lock, Shoot and Return to Center Wide Range Lens. Less Effect of Temperature Drift. Support HDMI Transmission. Able to Work uner Extremely Cold/Hot Environment (-30 ~+40 ). Rescue-2 is the 2nd generation of Rescue 10x zoom gimbal. One key lock, shoot and return to center. More stable, better camera lens, and less effect of temperature drift. Perfectly integrated with the HD camera and Basecam SimpleBGC encoder, the Rescue-2 utilizes world-leading stabilization technology to automatically stabilize your camera in flight. It is specially designed for search and rescue missions. This is another tool that can be added to your arsenal of equipment to aid you in those times when someone may be in imminent danger or distress. The general field of search and rescue has many different sub-fields typically determined by the type of terrain the search is conducted over, including mountain rescue, ground search and rescue, urban search and rescue, combat search and rescue, and air-sea search and rescue. Rescue-2 is a very versatile tool that can be applied to the vast majority of search and rescue missions due to its size, convenience, and quick deploy time. Using this 10x zoom gimbal will give you a stable eye in the sky that can be controlled via drone pilot or a secondary individual allowing for an overhead view that can cover a large amount of ground quickly and effectively. The 10x zoom function will allow you to remain at a distance yet zoom closely in on anything that requires your attention. The combined use of video transmitters and receivers will give you a live view back at the mission base and allow for coordinating crews in real time giving an effective means for obtaining the best possible outcome. Use the aviation material, Basecam SimpleBGC encoder, 1035 wide range lens and many more... The Rescue-2 is able to make the difficult balance between agility and image quality.

4 GENERAL SPECIFICATIONS ITEM MIN. STANDARD MAX. Input Voltage 10.2V 12.6V 18.5V Static Current 90mA 110mA 250mA Dynamic Current 0.18A 0.45A 2.2A 5V Output Voltage 4.5V 5V 5.2V 5V Output Current 100mA 500mA 1A Static Attitude Tracking Accuracy ±0.01 ±0.03 Motion Attitude Tracking Accuracy ±0.05 ±0.5 Pitching Angle +45 ~ -90 Rolling Angle +45 ~ -45 Heading Angle +180 ~ -180 Operation Temperature -30 ~ +40 Effective Pixel 2304(H) x 1536(V) Dynamic Range 110dB Optical Zoom 10X, f=4.9 to 49mm Minimum Focus Distance 1.5m Level Range of Observation 53.2 (Near Focus) (Far Focus) Vertical Range of Observation 39.8 (Near Focus) (Far Focus) Scanning Line by Line Video Output 720P HDMI Support Modes 1080P 30fps Storage HDMI 720P 50/60fps Frame Rate 60fps Signal-to-Noise Ratio(S/N) 48 db Lowest Light Sensitivity Color 0.05lux@F1.6 Back Light Compensation Back Light Compensation / Strong Light Suppression Day / Night Conversion Color Mode Only Auto Gain Auto White Balance Auto Electronic shutter Auto External Control UART (2400, 4800, 9600, 38400,57600bps) Commnucation Protocol Pelco-D, Hitachi, Visca, FC Remote Control Infrared / Remote Zoom / Menu Focus Auto / Manual / One-shot autofocus Focus Speed 2 Seconds Lens Initializing Built-in User Presets 20 Image Flip Mirro/Flip External Interface D-type HDMI, 6P terminal blocks Weight 410g

5 GIMBAL ROTATION The Rescue 2 gimbal has integrated with a 10x zoom optical HD camera, please do not change to other cameraa by yourself in case of imcompability. For any damage to the camera or gimbal, please contactt FPV Model. FPVMODEL LIMITED E mail: sales@fpvmodel.com Tel:

6 PACKING LIST CABLE DEFINITION

7 INSTALLATION Step 1: Insert the control cable to the right port of gimbal for functions of mode switching, zooming, pitching and 5V output. Step 2: Insert another control cable to VTX port on the left for functions of recording and manual focus.

8 Step 3: Install the Rack Mounts and then mount to your multirotor or fixed wing.

9 USE GUIDE 1: Turn on the radio before powering on the gimbal. 2. Turn the right sticker to left or right, the camera will turn left or right accordingly.

10 3. Turn the left sticker to left or right, the camera will up or down accordingly. 4. Turn the level to switch the 3 modes of Following, Locking and One key return.

11 5. Turn the right sticker up or down for manually focus. 6. Turn the left sticker up or down for zooming in or out.

12 7. Turn the right level to switch the modes of shooting & recording. FPV Model Rescue-2 Gimbal