Unit 8 Geometry I-1. Teacher s Guide for Workbook 8.1 COPYRIGHT 2010 JUMP MATH: NOT TO BE COPIED

Size: px
Start display at page:

Download "Unit 8 Geometry I-1. Teacher s Guide for Workbook 8.1 COPYRIGHT 2010 JUMP MATH: NOT TO BE COPIED"

Transcription

1 Unit 8 Geometry In this unit, students will identify and plot points in all four quadrants of the Cartesian plane, and perform and describe transformations (reflections, rotations, translations) in the Cartesian plane. Materials In all lessons of this unit you will need a pre-drawn grid on the board. If a grid is not already available, you can photocopy BLM 1-cm Grid Paper (p J-1) to a transparency and project it on the board. This will allow you to draw and erase shapes and lines on the grid without erasing the grid itself. Meeting Your Curriculum All the lessons in this unit are optional for students following the WNCP curriculum because this material was covered in Grade 7. Teacher s Guide for Workbook 8.1 I-1

2 G8-8 Introduction to Coordinate Systems Pages Curriculum Expectations Ontario: 6m52; 7m54; 8m5, 8m6, review WNCP: 6SS8; 7SS4; [CN, R, V], optional Vocabulary x-, y-axis axes origin x-coordinate, first coordinate y-coordinate, second coordinate quadrant (first, second, third, fourth) coordinate grid Cartesian coordinate system positive negative Goals Students will identify points in all four quadrants of the Cartesian plane. PRIOR KNOWLEDGE REQUIRED Is familiar with integer number lines Can plot points and identify coordinates of points in the first quadrant of the Cartesian plane Knows that variables represent numbers Materials pre-drawn grid dice Introduce coordinates in the first quadrant. Draw a coordinate grid (first quadrant only) on the board. Point out the axes and mention that axes is the plural of axis. The horizontal line is called the x-axis, and the vertical line is called the y-axis. Tell students that the point at which the two axes intersect is called the origin. Label the axes and the origin. Mark a point such as (4, 3) on the grid and use it to explain how to describe the location of a point on the grid: Go down to the x-axis (show what you mean) and look at the number that is directly below the point. This point has x = 4. The go left to the y-axis and look at the number on the y-axis directly to the left of the point. This point has y = 3. Have students identify the x and the y for other points on the grid. Ask students whether x = 4 and y = 3 can produce any other point on the grid. Have them go to 4 on the x-axis and draw several points that have x = 4. Which of these points will have y = 3? Is there more than one point like that? (no) Emphasize that the x and y numbers for a point identify its unique location. They are like an address for the point, and they are called the coordinates of the point. SAY: Imagine you have to write the coordinates of 100 points. Would you like to write x = and y = 100 times? What could you do to shorten the notation? Students might suggest making a chart. If students suggest writing a pair of numbers, ASK: Which should we write first, the x or the y? Why? (x, because x comes before y in the alphabet) Explain to students that mathematicians have made an international convention: The place of a point is expressed by two numbers, in parenthesis. The x is always on the left, and the y is always on the right: (x, y). Have your students rewrite the coordinates of the points they ve already identified in the new notation. Then ask them to draw a coordinate grid themselves and to plot several points on the grid. Tell students that the I-2 Teacher s Guide for Workbook 8.1

3 x-coordinate is often called the first coordinate, because it is written first, and the y-coordinate is called the second coordinate. Students need lots of practice plotting points on a grid. This is a good time to do the Activity. Extra practice: Review the names of special quadrilaterals and types of triangles. Then have students solve the problems below. Process Expectation Connecting 1. Graph the vertices A (1, 2), B (2, 4), C (4, 4), and D (5, 2). Draw lines to join the vertices. What kind of polygon did you draw? (isosceles trapezoid; PROMPTS: How many pairs of parallel sides does it have?(1) Are there any equal sides? (yes)) How many lines of symmetry does the shape have? (one) II III I IV 2. On grid paper, draw a coordinate grid. Graph the vertices of the triangle A (1, 2), B (1, 5), C (4, 2). Draw lines to join the vertices. What kind of triangle did you make? (right isosceles) Review negative numbers on a number line. Remind your students that number lines can be extended in both directions. Introduce the Cartesian coordinate system. Draw a coordinate grid on the board (or use the overhead). Make sure the axes are centred on the grid so that all four quadrants are visible. Explain that the grid was extended to include negative numbers and is called a Cartesian coordinate system. Label the axes and the origin. Point out that the axes divide the grid into four parts. Explain that these are called quadrants, and ask your students which words that they know have the same beginning. (quadrilateral, quadruple) Point out the connection these words have to the number four. Draw several points in various quadrants and ask your students to tell which quadrant the points are in. Points in the first quadrant. Add numbers to the positive halves of each axis (as you would on a number line) and explain that the x-axis labels the vertical grid lines with integers, and the y-axis labels the horizontal grid lines with integers. This allows us to extend the coordinate grid in any direction we want right, left, up, or down. Have students plot the point x = 5, y = 4. Then ask your students to find the point (3, 6). Remind students that the x-coordinate is always the first coordinate. Ask your students to plot points such as (1, 2), (4, 0), (0, 3), (0, 0). Points in other quadrants, starting from the third quadrant. Now make a mark at point ( 1, 1) and ask your students what the coordinates of this point might be. (x = 1, y = 1) Invite volunteers to add numbers to the negative parts of each axis. Have students find points such as x = 2, y = 3; x = 6, y = 1; x = 1, y = 4. Continue with points written in this notation: ( 3, 4), ( 5, 2). Mark a point in the second quadrant, such as ( 3, 4), and show students how to identify the signs of its coordinates the point is on the negative side of the x-axis and the positive side of the y-axis, so the signs will be (, +). Repeat with a point in the fourth quadrant. Ask students to identify the signs of various points on the coordinate system. Geometry 8-8 I-3

4 Students might mark the signs for each quadrant. Then ask students in which quadrants different points appear. EXAMPLES: x = 2, y = 3; x = 6, y = 1; x = 2, y = 5; ( 3, 2); (4, 6); ( 2, 2). Show students how to find the complete coordinates (number and sign) of a point in any quadrant. Then have students determine the coordinates of points in various parts of the grid. For example, ask students to name the coordinate pairs for five points in the second quadrant. What do these points have in common? (they have the same signs) Then do the reverse: give students various coordinates and ask them to mark the points. Start with points whose coordinates have the same numbers and/or same sign, such as (2, 3), (5, 4), ( 3, 3); then try slightly harder points, such as ( 4, 5); and then try points whose coordinates have the same number but different signs, such as ( 3, 3) and (3, 3). Next, give students points such as ( 4, 7) or (3, 6). Finally, include points on the axes, such as (0, 5) or ( 7, 0). Students need lots of practice plotting points in different quadrants. Extra practice: 1. Plot the following points and join them. What type of quadrilateral have you drawn? a) (1, 2), ( 1, 1), (2, 3), (4, 0) (Answer: square) b) ( 2, 2), ( 1, 1), ( 2, 4), ( 3, 1) (Answer: rhombus) Process assessment 8m6, [R, V] 2. Which quadrant is each point in? a) ( 567, 985) b) (567, 985) c) (567, 985) d) ( 567, 985) Answers: a) II b) IV c) I d) III Bonus Draw the points below on a grid, then join the points in the order you drew them. Join the first point to the last point. What shape did you make? Find the area of the shape. ( 3, 2), ( 1, 0), ( 1, 3), (0, 4), (1, 3), (1, 0), (3, 2), (3, 3), (2, 3), (1, 2), (0, 3), ( 1, 2), ( 2, 3), ( 3, 3) (Answer: rocket, area = 19 units 2 ) ACTIVITY Process Expectation Connecting Students will each need a pair of dice of different colours. The student rolls the dice and records the results as a pair of coordinates: (the number on the red die, the number on the blue die). He or she plots a point that has this pair of coordinates on grid paper. The student then rolls the dice a second time and obtains a second point in the same way. The student joins the points with a line, then has to draw a rectangle so that the line is a diagonal of the rectangle. Sometimes, several rectangles can be drawn from the same diagonal. If the line is neither vertical nor horizontal, the simplest solution is to make the sides of the rectangle horizontal and vertical. In this case, ask your students if they see a pattern in the coordinates of the vertices. I-4 Teacher s Guide for Workbook 8.1

5 Variation: When students have learned to draw points in all four quadrants of the coordinate grid, modify the activity as follows: add two coins, one red and one blue (to match the colours of the dice), with a plus sign on one side and a minus sign on the other side. The red die and coin will determine the x-coordinate, and the blue die and coin will determine the y-coordinate. Alternatively, use a sign spinner like the one below., +, y-axis +, + x-axis +, ADVANCED: In addition to the sign spinner above, use a quadrilateral spinner. The spinner provides the type of quadrilateral that students have to draw starting with a diagonal. Rectangle Isosceles Trapezoid Square Rhombus General Trapezoid Parallelogram Extensions y a) Plot each set of points on the coordinate system. i) (2, 2) (2, 1) (2, 0) (2, 1) (2, 2) ii) ( 3, 4) ( 3, 2) ( 3, 0) ( 3, 2) ( 3, 4) x iii) ( 10, 5) ( 5, 5) (0, 5) (5, 5) (10, 5) b) Draw a line that joins the points in each set above. Which axis is each line parallel to? c) Leo drew a line through three points and noted that the line is parallel to the y-axis. What can you say about the coordinates of Leo s points? 2. a) Draw a line through the points ( 3, 1), ( 2, 2), (1, 5). b) Find two other points on the line you drew in a). c) Look at all five points from a) and b). How can you get y from x? d) Which of these points are on the line you drew? i) (530, 534) ii) (530, 526) iii) ( 530, 534) iv) ( 530, 534) v) ( 530, 526) Geometry 8-8 I-5

6 G8-9 Translations and G8-10 Translations Advanced Pages Curriculum Expectations Ontario: 8m3, 8m5, 8m7, 8m52 WNCP: 7SS5; optional, [C, CN, R, V] Vocabulary x-, y-coordinate quadrant coordinate grid x-, y-axis Cartesian coordinate system corresponding points translation image transformation Goals Students will perform translations and describe the change in the coordinates under translations. PRIOR KNOWLEDGE REQUIRED Is familiar with integer number lines Can plot points and identify coordinates of points in the Cartesian plane Can add integers Can perform translations on a grid Is familiar with variables Materials pre-drawn grid Introduce transformations. Show students two L-shapes made of paper, oriented in different directions, beside each other. Tell students that you want to move them so that they coincide exactly one on top of the other, facing the same direction. Show this. Then tell students to pretend that the sheets are actually very heavy and very hot sheets of metal, so you need to program a robot to move them. To write the program you have to divide the process into very simple steps. It is always possible to move a figure into any position in space by using some combination of the following three movements: You may slide the figure in a straight line without allowing the object to turn at all. This is called translation. You may turn the figure around some fixed point, which can be on the figure or not. This is called rotation. You may flip the figure over. This is called reflection. Have students direct you, the robot, in what steps to perform to position the hot sheets of metal. Explain that mathematicians have proved that any two congruent figures can be made to coincide by some sequence of translations, reflections and rotations. These three changes to a figure are all examples of transformations. When a point or a shape is changed by a transformation, the resulting point or shape is called the image of the original point or shape. We often add a star (*) or a prime symbol ( ) to the name of the original point to label the image. For example, the image of point A can be denoted as A. I-6 Teacher s Guide for Workbook 8.1

7 Review translations on a grid. Use a grid on a transparency and a counter to review how to slide a dot on a grid (physically slide the dot, represented by the counter). Have students first signal the direction in which the dot slid (right or left, up or down), then ask them to hold up the number of fingers equal to the number of units the dot slid. Then ask students to draw a point on a grid, label it A, then draw a point A' that is the translation of A under the following directions: a) two units up b) three units down c) five units right d) one unit left e) three units up, two units left f) four units down, six units right How much did the figure slide? Show students the picture in margin and ask them how far the rectangle slid to the right. Ask for several answers and record them on the board. You may even call for a vote. Students might say the rectangle moved anywhere between one and seven units right. Take a rectangular block and perform the actual slide, counting the units with the students. The correct answer is 4. Process Expectation Reflecting on what made a problem easy or hard Draw a point at the top right vertex of the rectangle on the left. Is it easier now to see that the translation was 4 points to the right? Why is it easier? (we know how to translate points; this is a problem we have seen before) Point out that the vertex you marked and its image are corresponding points under a translation. When we talk about transformations, we want to know where each point went to under the transformation. Sometimes the correspondence (which point went to which point under the transformation) will be the thing that determines whether we are talking about translation, rotation, or reflection. We will see such examples later. Under translations, all points on a shape move the same amount in the same direction. Draw a pair of congruent shapes (e.g., right trapezoids) connected by a translation on a pre-drawn coordinate grid and mark one of the vertices on one of the shapes. Which vertex on the image corresponds to the vertex you marked? Have students draw the arrow between the vertex and its image. Ask students to describe how the vertex moved. Repeat with other vertices. Did all the vertices move the same amount horizontally and vertically? (yes) Did they move in the same direction? How do you know? Prompt students to look at the arrows they drew. What do they notice? (the arrows all point in the same direction and they are all the same length) Have students plot triangle A (0, 4), B (1, 2), C ( 1, 1) and a point C (2, 3) on a grid and ask them to translate the triangle so that C moves to C. ASK: Where did points A and B move to? (A (3, 0), B (4, 2)) Investigate the change in the coordinates under a translation. Have students work through the Investigation on Workbook page 202. When students are finished, they can solve several problems like this one: A point (5, 4) slides 3 units up and 7 units left. What are the coordinates of the new point? Predict the coordinates of the new point first, then check by drawing the points. Geometry 8-9, 10 I-7

8 Finally, have students generalize their findings using variables: Process assessment 8m2, [R] connection Number Sense A point (x, y) slides 3 units up and 2 units left. What are the coordinates of the new point? Draw a coordinate system and check your prediction for points (3, 3), (4, 2), ( 1, 2), and ( 3, 4). Describing translation as addition of integers. Draw a number line from 5 to 5 and ASK: To get from 3 to 5, what do you have to do? (move right two units) How can you describe that in terms of addition? (add 2) So when we describe a translation in terms of addition, we can think of moving right as adding positive number. What number should I add to 3 if I want to move two units left? ( 2) Repeat with a vertical number line. Finally, have students practise describing translations: 1. Think of up as positive and down as negative. What is the result of each pair of translations? Write an addition statement for the y-coordinate using integers to show the result. a) 3 units up and 5 units down (+3 + ( 5) = 2, so 2 units down) b) 4 units up and 3 units down c) 6 units down and 2 units up d) 7 units down and 11 units down Process assessment Workbook Question 2 8m6, [CN] 2. Think of right as positive and left as negative. Write an addition statement for the x-coordinate using integers to show the result of each pair of translations. a) 3 units right and 5 units left b) 6 units right and 4 units left c) 7 units left and 2 units right d) 8 units left and 12 units right 3. Think of right and up as positive and left and down as negative. Write two addition statements (one for the first coordinate and one for the second coordinate) using integers to show the result of each pair of translations. EXAMPLE: 3 units up and 2 units right, then 5 units down and 4 units right produces: y: +3 + ( 5) = 2 x: = +6, so the point moved 2 units down and 6 units right a) 4 units down and 8 units right, then 3 units down and 6 units left b) 2 units up and 7 units left, then 3 units up and 5 units right ASK: When you are moving up or down, which coordinate is affected? (y-coordinate) When you are moving left or right, which coordinate changes? (x-coordinate) Now give students several points on the Cartesian plane to translate. Ask students to predict each image, and then check the predictions by drawing the points, translating them, and checking the coordinates of the image. EXAMPLES: a) Move point (2, 4) 3 units up. (image: (2, 7)) b) Move point (2, 4) 2 units down. (image: (2, 6)) c) Move point (2, 4) 3 units right. (image: (5, 4)) d) Move point ( 2, 4) 5 units right. (image: (3, 4)) e) Move point ( 2, 5) 2 units left and 4 units down. (image: ( 4, 1)) I-8 Teacher s Guide for Workbook 8.1

9 f) Move point (3, 4) 3 units left and 4 units down. (image: (0, 8)) g) Move point ( 2, 3) 6 units up and 3 units left. Read the question carefully! (image: ( 5, 3)) Extra practice: A shape has coordinates A (2, 2), B (5, 3), C ( 3, 5), and D ( 5, 5). Under a translation, vertex A moved to position (7, 8). Give the coordinates of the other vertices under the translation. (Answer: B (10, 3), C (2, 11), D (0, 1)) Check by doing the actual translation. Bonus Abby translated ABC 3 units up and 5 units left. The image A B C has vertices ( 2, 4), ( 1, 1), and (2, 3). What were the coordinates of the vertices of ABC? Explain. Extensions 1. Write a general rule for a translation: If a point P (x, y) slides n units right to point P, then P has coordinates (, ). 2. Draw a point A on a grid. Translate it 3 units up and 4 units right to get point A. Draw the translation arrow. Draw a right triangle that has the translation arrow as its hypotenuse. Use the Pythagorean Theorem to find the distance point A moved. Geometry 8-9, 10 I-9

10 G8-11 Reflections Pages Curriculum Expectations Ontario: 8m1, 8m3, 8m5, 8m7, 8m52 WNCP: 7SS5; optional, [C, CN, R] Vocabulary x-, y-coordinate quadrant coordinate grid x-, y-axis horizontal vertical reflection mirror line Goals Students will perform and describe reflections of points and 2-D shapes on the Cartesian plane. PRIOR KNOWLEDGE REQUIRED Is familiar with integer number lines Can plot points and identify coordinates of points in the Cartesian plane Is familiar with opposite integers Can perform reflections on a grid Can identify and draw perpendicular lines Materials pre-drawn grid Reflecting points through a line. Review with students the steps for reflecting a point through a line. Work on a pre-drawn grid and use a grid line as the mirror line. Label the point you are reflecting A. Step 1: Draw a line through A that is perpendicular to the mirror line. Label the intersection point M A. Extend the perpendicular beyond the mirror line. Step 2: Measure the distance AM A, the distance from A to the mirror line. Step 3: Construct point A on the continuation of AM A, so that A M A = AM A and M A is the midpoint of AA. Have students practise this construction with several points on a grid. Include a point that is on the mirror line itself. Where should its image be? Ask students to explain their answer. (The image of a point on the mirror line is the point itself, because the distance AM A = 0, so both M A and A should be the same point as A.) Reflecting points through the horizontal axis. Students can practise the same construction on a Cartesian plane using the horizontal axis as the mirror line. When the construction is done, have students identify the coordinates of the original points and of the images. Have students complete Questions 1 and 2 on Workbook page 203. Points on a vertical line have the same x-coordinate. Ask students to plot the points P (3, 2) and Q (3, 1) on a coordinate grid and to draw the line PQ. ASK: Is the line you drew horizontal or vertical? (vertical) Have students extend the line and draw several more points on it, between P and Q, above P and Q, and below P and Q. Have students compare the coordinates of these new points. ASK: What do all points on line PQ have in common? (x-coordinate is the same) Can any point on the line PQ be in the second quadrant? (no) Why not? (All points in the second quadrant have negative I-10 Teacher s Guide for Workbook 8.1

11 x-coordinate, and points on PQ all have x = 3.) Is the point (3, 1742) on the line PQ? How do you know? (yes, it has x = 3) What about point (3, )? Process Expectation Looking for a pattern, Connecting Process assessment Workbook Question 7 8m1, [R] How coordinates change under a reflection through the horizontal axis. Ask students to look at the coordinates of points and their images in Questions 1 and 2 on Workbook page 203. Which coordinate is the same in the point and in the image? (x-coordinate) Why did that happen? (PROMPT: The original point and the image are on the same line. Is it a horizontal or a vertical line? What do you know about the first or the x-coordinate of points on the same vertical line? (they are the same) Which coordinate changed? (y-coordinate) How did it change? (the value is the same, the sign changed) Can you predict the coordinates of point (4, 3) under a reflection through the x-axis? (4, 3) Have students work through Questions 3 and 4 on Workbook pages Reflecting points through the vertical axis. Repeat the last three paragraphs for reflection through the vertical axis: reflect points through the vertical axis, see that points on a horizontal line have the same y-coordinate, and explore how coordinates change under reflection through the vertical axis. Have students complete Questions 5 to 8 on Workbook pages Reflection, translation, and congruency. Remind students that shapes that have the same size and shape are called congruent. Then ask students to plot a triangle with vertices ( 3, 0), ( 1, 2) and ( 1, 4). Ask students to reflect the triangle through the y-axis. Ask them to plot the first triangle on a new grid, and to translate it two units to the right. Ask students to compare the images: Are they congruent? Do they point in the same direction? Then have students do Question 9 on Workbook page 205. A C B P Distinguishing between reflections and translations using correspondence. Ask students to plot the following points on the coordinate grid and to connect them with line segments to obtain a trapezoid: A ( 5, 1), B ( 4, 3), C ( 2, 3), D ( 1, 1) Ask students to reflect the trapezoid through the y-axis and to label the image A B C D, respecting the order of the image points. Then ask students to copy ABCD to a new grid and this time to translate it 6 units to the right, labelling the image A*B*C*D*. Ask students to compare the images. Is point (2, 3) one of the vertices of the images? Which point? (D and A*) Repeat with other vertices. Point out that this means that different points of the original trapezoid were moved to the same point by different transformations. The image of the shape is the same in both cases, but the images of various points on the shapes are different. Draw the two triangles at left and ask students to identify the transformation (translation or reflection) that was used if a) A moved to P, or b) B moved to P. (Answers: a) translation, b) reflection) Geometry 8-11 I-11

12 4 Q V 3 R U 2 P W L Y 2 M X Z 3 K y y Process assessment Workbook Question 12 c) 8m7, 8m3, [C, V] A 0 C x x Show the grid with four triangles at left and ask students to tell which triangle was obtained from PQR by reflection and which one was obtained by translation. Ask students to identify the mirror lines and the amount by which PQR was translated. How do they know? Which vertex of each image corresponds to which vertex of the original triangle PQR? ASK: Can I take UVW to XYZ using one transformation? (no) Which two transformations can I perform to take UVW to XYZ? Encourage multiple answers. To prompt multiple solutions, ask students to make a copy of this triangle on grid paper, cut it out, and try to make the transformations using that copy. Two possible solutions: a) reflect through the y-axis, then translate 4 units down and 5 units right; b) translate 4 units down and 5 units left, then reflect through the y-axis. Have students identify the combinations of transformations that will take one triangle onto the other for all possible pairs of triangles in this picture. If students notice that UVW and LKM are connected by rotation, accept that answer but ask students to find a pair of reflections or translations to take one triangle onto the other. Now show the two triangles at left. Ask students what transformation could have taken these triangles onto each other. (reflection through the x-axis, translation 4 units down) Ask students to label the vertices of the image according to a reflection and then point to each vertex in turn and ask students to signal which letter it should be. Repeat with a translation. ASK: Why can we get from one of these triangles to the other using only one transformation, but there is more than one answer possible? How is triangle ABC special? (it is symmetrical, it is an isosceles triangle) Extension If you want to reflect a point through a line so that its x-coordinate doesn t change, which type of line should you reflect it in? (horizontal) I-12 Teacher s Guide for Workbook 8.1

13 G8-12 Reflections Advanced Pages Curriculum Expectations Ontario: 8m1, 8m5, 8m7, 8m52 WNCP: optional, [C, CN, R] Goals Students will perform and describe reflections of points and 2-D shapes through a slant line in the Cartesian plane. PRIOR KNOWLEDGE REQUIRED Vocabulary x-, y-coordinate quadrant coordinate grid x-, y-axis horizontal vertical reflection mirror line Is familiar with integer number lines Can plot points and identify coordinates of points in the Cartesian plane Is familiar with opposite integers Can perform reflections on a grid Can identify and draw perpendicular lines Materials pre-drawn grid rulers set squares or protractors Review reflecting points through a line not on a grid. Remind students that we draw a perpendicular (through the point) to the mirror line and mark the distance along the perpendicular that is equal to the distance from the point to the mirror line, measured along the perpendicular. Have students draw a reflection of a point on a grid through a slanted line using a ruler and a set square or a protractor. A slant line that goes diagonally through the grid squares makes a 45 angle with the grid lines. On a pre-drawn grid on the board draw a line as shown. Ask students to look at the squares that the line splits in half. What type of triangles does the line make? (right isosceles) How do you know? (The sides of a square are equal, so two sides of the triangle are equal; the angles of a square are right angles, so the triangle is a right triangle.) What do we know about the angles of a right isosceles triangle? (they are equal, they are both 45 ) What angle does this line make with a horizontal line? With a vertical line? (both 45 ) Draw another diagonal line going through several grid points, at a right angle to the first line. Ask students to find the angle between two such lines. How do they know the answer? On a clean grid, draw a line that makes a 45 angle with the grid lines and goes right and up, and mark a point P not on the line. SAY: I need to draw a perpendicular line to this slant line, through point P. Can I do that using a ruler and the grid, without a protractor or a set square? Have a volunteer show how to do it, then ask another volunteer to explain why the lines are perpendicular. Geometry 8-12 I-13

14 Have students practise drawing perpendiculars through given points to a slant line, as in Question 1 on Workbook page 207. Reflection through the line y = x using a grid. Draw the line y = x on the pre-drawn grid on the board. Have students identify the coordinates of several points on the line. How are the points on the line special? (they have equal first and second coordinates) Tell students the line has a special name, y = x. Ask them to explain why they think the line is called that. Mark a point P not on the line. ASK: How can you use the grid to reflect point P through this line? Invite a volunteer to perform the construction. Have students draw the line y = x and mark several points not on the line, then have students reflect the points through the line. EXAMPLES: (2, 3), ( 2, 3), (0, 2), (3, 1), ( 1, 4), ( 1, 3). Have students do Question 2 on Workbook page 207. Process Expectation Making and investigating conjectures Process assessment Workbook Question 3 8m1, 8m7, [R, C] Under reflection through the y = x, points in the first and third quadrants stay in the same quadrant, and points in the second and fourth quadrants move to the fourth and second quadrants. Ask students to sort the points they reflected by quadrant. Where do points in each quadrant go? Have students make a conjecture then choose several points and check their conjecture. Bonus Where do points on the axes go under reflection through y = x? (to the other axis) Predict the coordinates of points under reflection through y = x, then check the prediction. Have students predict the coordinates of the following points under a reflection through the line y = x, then have them plot the points, reflect them, and check their predictions. Repeat with shapes, as in Question 4 on Workbook page 208. Extensions connection Number Sense, Patterns 1. a) David starts at (0, 0) and draws a line by moving 3 units up for every 2 units he moves right. i) Draw three points on David s line on grid paper. ii) Find the ratio x : y for three points on this line. What do you notice? (the ratios are the same) iii) If y = 762, what is x? (508) iv) If x = 48, what is y? ( 72) b) Samantha starts at (0, 5) and draws a line by moving 3 units up for every 2 units she moves right. i) Draw three points on Samantha s line on grid paper. ii) Find the ratio x : (y 5) for three points on this line. What do you notice? (the ratios are the same) I-14 Teacher s Guide for Workbook 8.1

15 iii) If y = 374, what is x? (246) iv) If x = 256, what is y? ( 371) c) Tom starts at ( 4, 1) and draws a line by moving 3 units up for every 2 units he moves right. Write a ratio that every point on the line satisfies. Show your answer with examples. 2. Reflections are widely used in science and technology. box with glass front mirror coin a) Reflections in a tilted mirror are used in periscopes, devices that allow mariners in a submarine to see what is going on above the surface of the water. b) Tilted mirrors are also used in magic tricks, such as magic boxes. When you drop a coin into a magic box with a glass side, it disappears in the box. The viewer sees the bottom side of the box thinking that this is its back side. However, there is space behind the mirror where the coins are hidden. 2 P m 3. Review with students the method used to draw right angles with slant sides on a grid (see lesson G8-2). For example, to draw a perpendicular to line m in the picture (see margin; line m goes 2 right and 3 up) you need to go 2 units down and 3 units right. Then teach students to reflect a point P in a general slant line. Students need to construct a perpendicular through P to the given line, using the method above, and then use measurement along the perpendicular to find the image of P. 4. BLM Reflections in the Line y = x (p I-27) Geometry 8-12 I-15

16 G8-13 Rotations Pages Curriculum Expectations Ontario: 8m5, 8m6, 8m52 WNCP: 7SS5; optional, [CN, V] Goals Students will perform and describe rotations of points around the origin of the Cartesian plane. PRIOR KNOWLEDGE REQUIRED Vocabulary quadrant x-, y-axis coordinate grid x-, y-coordinate clockwise counter-clockwise rotation origin straight angle Can plot points and identify coordinates of points in the Cartesian plane Can perform rotations of 90, 180, and 270 clockwise and counter-clockwise Can identify and draw perpendicular lines and circles Knows that the sum of the angles in a circle is 360 Is familiar with quarter turns (90 ), half turns (180 ), and three-quarter turns (270 ) Can find a fraction of a number (e.g., 1/4 of 360 = 90 ) Can find horizontal and vertical length Can identify congruent triangles Understands that congruent triangles have equal sides and angles Materials pre-drawn grid BLM Find a Flip (pp I-25 I-26) Process Expectation Visualizing Review clockwise and counter-clockwise and the description of turns. Review the meaning of the terms clockwise and counter-clockwise using a large clock or by drawing arrows on the board. If you have a large clock, ask volunteers to rotate the minute hand clockwise and counterclockwise a full turn, a half turn, and a quarter turn. You might also ask your students to be the clocks: each student stands with an arm stretched out and turns clockwise (CW) or counter-clockwise (CCW) according to your commands. The outstretched arm clearly draws the fraction of a circle traced by the turn and helps to visualize the turn. Draw several clocks on the board as shown below and ask your students to tell you how far and in which direction each hand moved from start to finish: ANSWERS: Half turn CCW, three-quarter turn CW, half turn CW, quarter turn CW I-16 Teacher s Guide for Workbook 8.1

17 Remind students that the angles in a circle add to 360, and review the degree measures that correspond to a quarter turn, half turn, and threequarter turn. Then draw examples with only one arrow and ask students to turn the arrow: a) 90 CCW b) 180 CCW c) 270 CW d) 270 CCW e) 270 CW f) 180 CW g) 90 CCW h) 90 CW Process assessment 8m5, [CN] ASK: Which turns always produce the same result? Why does this happen? (The sum of the angles around the origin is 360, so a 270 rotation in one direction is the same as a 90 rotation ( ) in the other direction. Also, 180 = , so a 180 rotation in either direction produces the same result.) Perform rotations using a compass and a set square or protractor. Model the construction as in the Example on Workbook page 209. Then ask students to draw a pair of perpendicular lines on grid paper (to serve as the axes) and to mark a point in the first quadrant. Have students use a compass and a set square (or protractor) to rotate the point 90 clockwise around the origin. Which quadrant did the point go to? Repeat with a 90 counter-clockwise rotation of another point in the first quadrant. Repeat with points in all other quadrants. Include some 180 rotations. Finally, have students signal the quadrant the image point will be in after rotation by holding up the right number of fingers. Include some 180 rotations. EXAMPLE: Point P is in the third quadrant. I rotate it 90 counterclockwise. Which quadrant will the point be in? Bonus Point P is ( 3, 4). I rotate it 90 clockwise around the origin. What will be the signs of its coordinates? Rotating right triangles with one vertex at the origin. Review with students how they can rotate a right triangle with one vertex at the origin and one of the shorter sides going along an axis. (Rotate the side going along the axis first, then add the rest of the triangle.) Point out that this is similar to what students did earlier in the lesson: after a 90 counterclockwise rotation around the origin, a triangle with one vertex in quadrant IV has that vertex rotated to quadrant I, just as a point from quadrant IV would be rotated into quadrant I. EXAMPLE: Geometry 8-13 I-17

18 y y y x x x Process Expectation Looking at a similar problem for ideas A O y B B A Process assessment Workbook Question 15f), 8m5, 8m7, [C, CN] x ASK: Is it easier to rotate a triangle on a grid or to rotate a point with a compass and a set square? Could we combine these two methods to produce an easy way to rotate a point in the coordinate plane? Have students come up with suggestions. If necessary, tell students to imagine that the point is the vertex of a triangle. Explain that students can rotate the point by counting the squares between it and the origin: the point is 2 units down along the y-axis and 4 units right from the origin, so the image after a 90 CW rotation will be 2 units along the x-axis to the right, and 4 units up. Discuss with students why this method works: when you rotate the triangle, you rotate each part of it by the same angle. Prompt students to think about how they actually rotate a triangle. What information do they use? Looking at the picture in margin, they first draw side OB = OB, then they draw side A B = AB at a right angle to the previous side. This way they produce A OB. How are triangles A OB and AOB related? (they are congruent) Why? By which congruence rule? (SAS) Have students write the equalities for the remaining pairs of sides and angles of these triangles. Work with students through Question 6 on Workbook page 211 to prove that the side OA rotates 90 to side OA when they use this method. Practice rotating points. Have students use the method of rotating a triangle to rotate a point in a coordinate plane, using the questions on Workbook pages and more like them. ACTIVITY Find a Flip. Students play in pairs. Each pair needs a copy of BLM Find a Flip. Students cut out the cards on the BLM. There are 32 cards in total: four different sets, or suits, of eight congruent shapes, with each suit consisting of four identical shapes (in a row) and their reflections (in the next row). Game rules: Players shuffle the deck, deal out 4 cards to each player, and lay one card face up on any square of the game board. If a player has a card that is a transformation of the card on the board, he or she can place the card in the same 2 2 region of the game board (adjacent to at least one card already in the region) and pick a new card from the deck. The players goal is to get rid of all the cards by placing them in groups of four. I-18 Teacher s Guide for Workbook 8.1

19 Example of reflection over a side A completed region (with reflections over the sides) If a player does not have a card that is a transformation of any of the cards on the board, the player can place a card with a shape not congruent to any card already on the board (i.e., a card from a new suit) in an empty region. (Since there are four regions and four suits, there will always be an empty region on the board unless all four suits are already in play.) Players cannot place cards so that there are four cards in a row or in a column, or on any of the diagonals, unless the card they place is the last in its region. When a region is completed, all four cards from this region are discarded. If there are no free regions, and the player cannot place a card, the player takes a card from the deck. If that card cannot be placed, the player misses a turn. Two ways to play: First, let students play the game with reflections over the sides (as shown in the examples). Then ask them to play with rotations: that each card placed should be a 90 rotation of the adjacent cards. Players must say around which vertex the rotation was made. Discuss and compare: After students have played the game both ways several times, discuss similarities and differences between the two. How many regions can you complete with cards from the same suite? (2) How many different types of cards are in each suit? (2 types, 4 cards of each type) How are the squares completed in each game different how many cards of each type does each square contain? (2 of one type and 2 of another type for reflections, 4 of the same type for rotations) In which game was it easier to complete the first square? Why? (Each suit has 4 cards of one type and 4 cards that are the reflection of the first type. When you fill a region using reflections, there are 2 cards of the same type and 2 cards that are reflections of the first two. So when the very first card of any suit is placed, you have 4 more cards that are reflections of that card to add to it. When you play with rotations, each region consists of 4 identical cards, so when the very first card of a suit is placed, there are only 3 cards you can add to it. This means it is harder to complete the first region in the game with rotations.) Is there a difference in constructing the second region with the same suit? (no, you have 4 cards from the same suit left in both cases, and they can always fill a region) If your students are familiar with probability, have them answer the following question: You have just started the game and there is one card on the board. You have 4 cards, and it is your turn. Is the probability that you have a card that you can place in the same region larger in the game with rotations or in the game with reflections? Explain without figuring out the exact probabilities. (Answer: For reflections, there are 4 cards that are good for you in the whole deck, and for rotations there are only 3. So the probability of having a good card is greater for reflections.) Geometry 8-13 I-19

20 Extension B A O P a) Describe the transformation (including the translation arrow, and the mirror line or centre and amount of rotation) that takes the rectangle ABCD onto the other rectangle so that: i) A P ii) B P iii) D P C D Bonus Find two consecutive transformations that will take C onto P. (One possible solution: reflect ABCD though the horizontal line through O and translate as in ii) ANSWERS: i) reflection through the vertical line through O, ii) translation right along BP, iii) 180 rotation (clockwise or counterclockwise) around O. B O A P b) Describe the transformation (including the translation arrow, and the mirror line or centre and amount of rotation) that is needed to take the square ABCD onto the square APQD so that: i) A P, D Q ii) B P, A Q iii) C P, B Q C D Q iv) D P, C Q v) B P, C Q. ANSWERS: i) translation right along AP, ii) 90 clockwise rotation around D, iii) 180 rotation (clockwise or counter-clockwise) around O, iv) 90 counter-clockwise rotation around A, v) reflection through AD. I-20 Teacher s Guide for Workbook 8.1

21 G8-14 Transformations Advanced Pages Curriculum Expectations Ontario: 8m1, 8m2, 8m5, 8m7, 8m52, 8m53 WNCP: 7SS5; optional, [C, CN, R, V] Vocabulary quadrant x-, y-axis coordinate grid x-, y-coordinate clockwise counter-clockwise rotation reflection translation mirror line origin translation arrow correspondence Process assessment Workbook Question 4 8m1, 8m7, [R, C] Goals Students will perform and describe transformations of shapes in the Cartesian plane. PRIOR KNOWLEDGE REQUIRED Can plot points and identify coordinates of points in the Cartesian plane Can perform, identify, and describe rotations, reflections, and translations in the Cartesian plane Materials pre-drawn grid BLM Find a Flip (pp I-25 I-26) Review with students the method for rotating points that they used during the previous lesson using a triangle with a vertex at the origin. Have students practise rotating points around the origin. Use the same method to rotate shapes around the origin, by rotating the vertices and then joining them. How coordinates change under 180 rotations. Have students rotate several shapes with vertices in all four quadrants (see example in margin) 180 clockwise or counter-clockwise. Ask students to make and complete a chart like the one on Workbook page 215, Question 4. Have students look for a pattern in the coordinates of the vertices, and describe the change in the vertices. (both coordinates change signs, the numbers stay the same) Example y 4 3 K 2 J L 2 3 M 4 x Reflection through one axis then the other produces a 180 rotation around the origin. Ask students to plot a triangle with vertices (2, 1), (2, 4), and (3, 4) on a coordinate grid. Ask them to reflect it in the x-axis and then to reflect the image in the y-axis. What are the coordinate of the vertices of the triangle after each reflection? What single transformation takes the original triangle into the final image? (a 180 rotation around the origin) Ask students to use coordinates to explain why this is so. (Reflection in the x-axis changes the sign of the y-coordinate, and reflection in the y-axis changes the sign of the x-coordinate. Doing both is the same as changing the sign of both coordinates, just as a 180 rotation does.) Use variables to summarize. ASK: If I take a point A (x, y) and reflect it in the x-axis, what will the coordinate of the image A be? (x, y) If I take a point A (x, y) and reflect it in the y-axis, what will the coordinate of the image A* be? ( x, y) If I take a point A (x, y) and rotate it 180 around the origin, what will the coordinate of the image be? ( x, y) What does this mean? (A reflection in the x-axis followed by a reflection in the y-axis produces a 180 rotation.) Repeat the exercise starting from a different triangle in the first quadrant with reflection through the y-axis first and then reflection through the x-axis. Geometry 8-14 I-21

22 connection Algebra ASK: Will these formulas work for points in a different quadrant? Can I take (x, y) to be, say, ( 2, 3)? (yes) What is x equal to? ( 2) Point out that we can substitute negative numbers for variables, and if x is a negative number, then x should simply be a positive number. What is y equal to? What is x equal to? What is y equal to? Ask students to check that the point (2, 3) is indeed the 180 rotation of ( 2, 3) around the origin. Use correspondence to distinguish between reflection in a slant line and 180 rotation. Ask students to plot two triangles on a new grid: K ( 3, 1), L ( 1, 3), M ( 1, 1) and K (1, 3), L (3, 1), M (1, 1). ASK: Can you get one of these triangles from the other one by a 180 rotation around the origin? Then ask students to look at the correspondence between the vertices. Was K L M indeed obtained by a 180 rotation of KLM around the origin? (no) What would the coordinates of the image vertices be under that rotation? (K (3, 1), L (1, 3), M ( 1, 1)) Which transformation takes KLM to K L M? (a reflection in the slant line y = x) Process Expectation Justifying the solution EXAMPLES: Congruence and transformations. Remind students that rotations, reflections, and translations all produce shapes congruent to the original. ASK: A shape and its image under rotation are congruent. Look at this statement: If I have two congruent shapes, there is a rotation that takes one into the other. Is that true or false? Ask students to draw a counter-example to the statement. How do they know the shapes are congruent? How do they know that this pair of shapes is not connected by a rotation? (The shape has to point in a different direction after a rotation, but these two shapes have exactly the same orientation.) Repeat with reflection and translation instead of rotation. Homework project: Choose a real-world event (such as driving a car, using a playground, loading and using a dishwasher, visiting an amusement park, performing physical exercises, undergoing a dental procedure, etc.) that involves at least two different transformations (rotation, reflection, translation) and describe which movements or actions during this event are examples of each transformation. Reflection through the common side 90 turn CW around the bottom-right vertex ACTIVITY Have students play Find a Flip (see the Activity in G8-13) with rotations and reflections. A valid placement of the next card in a region that already has at least one card could be a 90 rotation around a common vertex of the adjacent card OR a reflection of the adjacent card over one of its sides. When a fourth card in the region is placed, the placement has to be valid relative to both adjacent cards. If a player cannot add a card to one of the existing regions, he or she can start a new region with a card from a new suit. After students have played the game a couple of times, discuss what squares you can produce if you have two identical cards and two I-22 Teacher s Guide for Workbook 8.1

23 Invalid placement this shape is a clockwise turn of the shape on the left, but it cannot be obtained from the shape above it by a rotation or reflection over the common side. Good placement this shape is a counter-clockwise turn of the shape on the left, and a reflection of the shape above over the common side. cards that are the reflections of the first two cards. (Two different types of squares: the identical cards can be positioned diagonally from each other in which case the square was obtained by reflections only or side by side, in which case there were two rotations and two reflections, both reflections done in the same line between the pairs of identical cards.) Have students show the relevant placements of cards for each case. ASK: What transformation takes the top left card to the bottom right card in each case? Is there a transformation that takes the top right card to the bottom left card in each case? If no, what combinations of two transformations will work? (Answers will vary depending on the placement. In the example of good placement above, the diagonal cards differ by reflection in a slant line. Encourage multiple answers in case of combination of transformations.) Can you build a square from three identical cards and one card that is a reflection of these? (yes, the different shape will have to be reflected through the sides adjacent to other shapes, and the other three can be obtained from each other by rotations around the origin) Again, ask students to show a placement of cards for this situation and to identify the transformations between the diagonal cards. Extensions 1. A shape has coordinates A (1, 2), B (1, 4), C (4, 2). Under a rotation around one of the vertices, point C moves to position (3, 7). Which vertex in the shape was used as the centre of rotation and what was the rotation? (B, 90 counter-clockwise rotation) 2. Draw a first quadrant coordinate grid on grid paper. Draw a triangle with vertices A (1, 5), B (4, 5), C (4, 7). Draw a vertical mirror line through the points (5, 0) and (5, 7). Reflect the triangle in the mirror line. Then rotate the triangle 90 counter-clockwise around the image of vertex C. Write the coordinates of the vertices of the new triangle. (A* (8,10), B* (8, 7), C* (6, 7)) y 4 B A 3 2 F D 2 G 3 B C 4 x 3. Ask students to draw a shape with the following vertices on a coordinate grid: (1, 2), (1, 4), (2, 4), (2, 3). Ask students to describe the shape as best they can (right trapezoid with a 45 angle). Point out that the shape is pointing down and left the acute angle is at the left bottom vertex, and the slanted side goes right and up from the acute angle. Label this shape A. Now ask students to perform a number of transformations on this shape to produce other shapes: B: Reflect shape A through the y-axis. C: Reflect shape A through the x-axis. D: Rotate shape A 90 clockwise around the origin. E: Rotate shape A 180 clockwise around the origin. Geometry 8-14 I-23

Unit 1, Lesson 1: Moving in the Plane

Unit 1, Lesson 1: Moving in the Plane Unit 1, Lesson 1: Moving in the Plane Let s describe ways figures can move in the plane. 1.1: Which One Doesn t Belong: Diagrams Which one doesn t belong? 1.2: Triangle Square Dance m.openup.org/1/8-1-1-2

More information

G5-20 Introduction to Slides

G5-20 Introduction to Slides WORKBOOK 5:2 PAGE 317 G5-20 Introduction to Slides GOALS Students will slide a dot on a grid. PRIOR KNOWLEDGE REQUIRED Ability to count Distinguish between right and left VOCABULARY slide For this lesson,

More information

Geometry Sixth Grade

Geometry Sixth Grade Standard 6-4: The student will demonstrate through the mathematical processes an understanding of shape, location, and movement within a coordinate system; similarity, complementary, and supplementary

More information

Chapter 2: Transformations. Chapter 2 Transformations Page 1

Chapter 2: Transformations. Chapter 2 Transformations Page 1 Chapter 2: Transformations Chapter 2 Transformations Page 1 Unit 2: Vocabulary 1) transformation 2) pre-image 3) image 4) map(ping) 5) rigid motion (isometry) 6) orientation 7) line reflection 8) line

More information

What You ll Learn. Why It s Important

What You ll Learn. Why It s Important Many artists use geometric concepts in their work. Think about what you have learned in geometry. How do these examples of First Nations art and architecture show geometry ideas? What You ll Learn Identify

More information

Translations, Reflections, and Rotations

Translations, Reflections, and Rotations Translations, Reflections, and Rotations This photo shows a classic optical illusion called the Necker Cube. It's an example of an impossible object. Optical illusions are often helpful to scientists who

More information

Constructing Symmetrical Shapes

Constructing Symmetrical Shapes 1 Constructing Symmetrical Shapes 1 Construct 2-D shapes with one line of symmetry A line of symmetry may be horizontal or vertical 2 a) Use symmetry to complete the picture b) Describe the method you

More information

2. In which of the following diagrams is one shape the reflection of the other in the mirror line shown? Make a correct diagram for those that are

2. In which of the following diagrams is one shape the reflection of the other in the mirror line shown? Make a correct diagram for those that are 2. In which of the following diagrams is one shape the reflection of the other in the mirror line shown? Make a correct diagram for those that are not correct. 70 Worksheet 4 1. Use a coordinate grid to

More information

G7 3 Measuring an angle

G7 3 Measuring an angle 1 Geometry 1 Introduction In this unit, students will use protractors, rulers, set squares, and various strategies to construct related lines using angle properties investigate geometric properties related

More information

Section 12.1 Translations and Rotations

Section 12.1 Translations and Rotations Section 12.1 Translations and Rotations Any rigid motion that preserves length or distance is an isometry. We look at two types of isometries in this section: translations and rotations. Translations A

More information

Unit 14: Transformations (Geometry) Date Topic Page

Unit 14: Transformations (Geometry) Date Topic Page Unit 14: Transformations (Geometry) Date Topic Page image pre-image transformation translation image pre-image reflection clockwise counterclockwise origin rotate 180 degrees rotate 270 degrees rotate

More information

Chapter 8. Properties of Triangles and Quadrilaterals. 02/2017 LSowatsky

Chapter 8. Properties of Triangles and Quadrilaterals. 02/2017 LSowatsky Chapter 8 Properties of Triangles and Quadrilaterals 02/2017 LSowatsky 1 8-1A: Points, Lines, and Planes I can Identify and label basic geometric figures. LSowatsky 2 Vocabulary: Point: a point has no

More information

Module Four: Connecting Algebra and Geometry Through Coordinates

Module Four: Connecting Algebra and Geometry Through Coordinates NAME: Period: Module Four: Connecting Algebra and Geometry Through Coordinates Topic A: Rectangular and Triangular Regions Defined by Inequalities Lesson 1: Searching a Region in the Plane Lesson 2: Finding

More information

Geometry. Standardized Practice Have students try the following problem.

Geometry. Standardized Practice Have students try the following problem. 1 Students need a basic understanding of angles to learn the properties of twodimensional shapes. In this lesson, students use models to represent, measure, and classify angles. Objective Recognize types

More information

Geometry Foundations Planning Document

Geometry Foundations Planning Document Geometry Foundations Planning Document Unit 1: Chromatic Numbers Unit Overview A variety of topics allows students to begin the year successfully, review basic fundamentals, develop cooperative learning

More information

CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38. Transformations in the Coordinate Plane

CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38. Transformations in the Coordinate Plane CCGPS UNIT 5 Semester 2 COORDINATE ALGEBRA Page 1 of 38 Transformations in the Coordinate Plane Name: Date: MCC9-12.G.CO.1 Know precise definitions of angle, circle, perpendicular line, parallel line,

More information

Chapter 5. Transforming Shapes

Chapter 5. Transforming Shapes Chapter 5 Transforming Shapes It is difficult to walk through daily life without being able to see geometric transformations in your surroundings. Notice how the leaves of plants, for example, are almost

More information

2-1 Transformations and Rigid Motions. ENGAGE 1 ~ Introducing Transformations REFLECT

2-1 Transformations and Rigid Motions. ENGAGE 1 ~ Introducing Transformations REFLECT 2-1 Transformations and Rigid Motions Essential question: How do you identify transformations that are rigid motions? ENGAGE 1 ~ Introducing Transformations A transformation is a function that changes

More information

Lesson 1. Rigid Transformations and Congruence. Problem 1. Problem 2. Problem 3. Solution. Solution

Lesson 1. Rigid Transformations and Congruence. Problem 1. Problem 2. Problem 3. Solution. Solution Rigid Transformations and Congruence Lesson 1 The six frames show a shape's di erent positions. Describe how the shape moves to get from its position in each frame to the next. To get from Position 1 to

More information

Integrated Algebra A Packet 1

Integrated Algebra A Packet 1 Name Date Integrated Algebra A Packet 1 Lesson/Notes Homework Coordinate Plane HW #1 Connecting Points To Make Figures HW #2 Intro to Transformations/Translations HW #3 Reflections HW #4 Symmetry HW #5

More information

PRACTICAL GEOMETRY SYMMETRY AND VISUALISING SOLID SHAPES

PRACTICAL GEOMETRY SYMMETRY AND VISUALISING SOLID SHAPES UNIT 12 PRACTICAL GEOMETRY SYMMETRY AND VISUALISING SOLID SHAPES (A) Main Concepts and Results Let a line l and a point P not lying on it be given. By using properties of a transversal and parallel lines,

More information

UNIT PLAN. Big Idea/Theme: Polygons can be identified, classified, and described.

UNIT PLAN. Big Idea/Theme: Polygons can be identified, classified, and described. UNIT PLAN Grade Level: 5 Unit #: 11 Unit Name Geometry Polygons Time: 15 lessons, 18 days Big Idea/Theme: Polygons can be identified, classified, and described. Culminating Assessment: (requirements of

More information

3 Identify shapes as two-dimensional (lying in a plane, flat ) or three-dimensional ( solid ).

3 Identify shapes as two-dimensional (lying in a plane, flat ) or three-dimensional ( solid ). Geometry Kindergarten Identify and describe shapes (squares, circles, triangles, rectangles, hexagons, cubes, cones, cylinders, and spheres). 1 Describe objects in the environment using names of shapes,

More information

The Common Curriculum Framework. for K 9 MATHEMATICS. Western and Northern Canadian Protocol. May 2006

The Common Curriculum Framework. for K 9 MATHEMATICS. Western and Northern Canadian Protocol. May 2006 The Common Curriculum Framework for K 9 MATHEMATICS Western and Northern Canadian Protocol May 2006 Grade 5 Strand: Number 1. Represent and describe whole numbers to 1 000 000. [C, CN, V, T] 2. Use estimation

More information

CCM6+/7+ - Unit 13 - Page 1 UNIT 13. Transformations CCM6+/7+ Name: Math Teacher: Projected Test Date:

CCM6+/7+ - Unit 13 - Page 1 UNIT 13. Transformations CCM6+/7+ Name: Math Teacher: Projected Test Date: CCM6+/7+ - Unit 13 - Page 1 UNIT 13 Transformations CCM6+/7+ Name: Math Teacher: Projected Test Date: Main Idea Pages Unit 9 Vocabulary 2 Translations 3 10 Rotations 11 17 Reflections 18 22 Transformations

More information

Unit 7. Transformations

Unit 7. Transformations Unit 7 Transformations 1 A transformation moves or changes a figure in some way to produce a new figure called an. Another name for the original figure is the. Recall that a translation moves every point

More information

Let a line l and a point P not lying on it be given. By using properties of a transversal and parallel lines, a line which passes through the point P

Let a line l and a point P not lying on it be given. By using properties of a transversal and parallel lines, a line which passes through the point P Let a line l and a point P not lying on it be given. By using properties of a transversal and parallel lines, a line which passes through the point P and parallel to l, can be drawn. A triangle can be

More information

Handout 1: Viewing an Animation

Handout 1: Viewing an Animation Handout 1: Viewing an Animation Answer the following questions about the animation your teacher shows in class. 1. Choose one character to focus on. Describe this character s range of motion and emotions,

More information

Ready to Go On? Skills Intervention Building Blocks of Geometry

Ready to Go On? Skills Intervention Building Blocks of Geometry 8-1 Ready to Go On? Skills Intervention Building Blocks of Geometry A point is an exact location. A line is a straight path that extends without end in opposite directions. A plane is a flat surface that

More information

MD5-26 Stacking Blocks Pages

MD5-26 Stacking Blocks Pages MD5-26 Stacking Blocks Pages 115 116 STANDARDS 5.MD.C.4 Goals Students will find the number of cubes in a rectangular stack and develop the formula length width height for the number of cubes in a stack.

More information

INFORMATION FOR PARENTS AND CARERS TARGETS IN MATHEMATICS

INFORMATION FOR PARENTS AND CARERS TARGETS IN MATHEMATICS INITIAL TARGETS I can share 6 objects between 2 children. I can write and use numbers (less than 10) in role play. I can count up to 10 objects independently. I can read and write numbers to 10 independently.

More information

Quadrilaterals & Transformations Study Guide

Quadrilaterals & Transformations Study Guide s & Transformations Study Guide What do I need to know for the upcoming Summative Assessment? s Classifications and Properties of: o o Trapezoid o Kite o Parallelogram o Rhombus o Rectangle o Square The

More information

Shape & Space Part C: Transformations

Shape & Space Part C: Transformations Name: Homeroom: Shape & Space Part C: Transformations Student Learning Expectations Outcomes: I can describe and analyze position and motion of objects and shapes by Checking for Understanding identifying

More information

Chapters 7 & 8. Parallel and Perpendicular Lines/Triangles and Transformations

Chapters 7 & 8. Parallel and Perpendicular Lines/Triangles and Transformations Chapters 7 & 8 Parallel and Perpendicular Lines/Triangles and Transformations 7-2B Lines I can identify relationships of angles formed by two parallel lines cut by a transversal. 8.G.5 Symbolic Representations

More information

Section A1: Gradients of straight lines

Section A1: Gradients of straight lines Time To study this unit will take you about 10 hours. Trying out and evaluating the activities with your pupils in the class will be spread over the weeks you have planned to cover the topic. 31 Section

More information

4 Mathematics Curriculum. Module Overview... i Topic A: Lines and Angles... 4.A.1. Topic B: Angle Measurement... 4.B.1

4 Mathematics Curriculum. Module Overview... i Topic A: Lines and Angles... 4.A.1. Topic B: Angle Measurement... 4.B.1 New York State Common Core 4 Mathematics Curriculum G R A D E Table of Contents GRADE 4 MODULE 4 Angle Measure and Plane Figures GRADE 4 MODULE 4 Module Overview... i Topic A: Lines and Angles... 4.A.1

More information

Unit 1 Transformations in the Coordinate Plane

Unit 1 Transformations in the Coordinate Plane Unit 1 Transformations in the Coordinate Plane Table of Contents Title Page # Formula Sheet...2 Lesson 1 1: Introduction to Transformations and Rotations 3 Lesson 1 2: Reflections and Translations..9 Lesson

More information

G2-1 Lines Pages 70 71

G2-1 Lines Pages 70 71 G2-1 Lines Pages 70 71 CURRICULUM REQUIREMENT AB: required BC: required MB: required ON: required Goals Students will identify straight and curved lines and sides, and open and closed lines. PRIOR KNOWLEDGE

More information

a) b) c) d) 4. Which graph shows a triangle and its reflection image in the y axis?

a) b) c) d) 4. Which graph shows a triangle and its reflection image in the y axis? 1. Describe in words the translation represented by (x + 6, y 3). a) 3 units to the left, 6 units up b) 3 units to the right, 6 units down c) 6 units to the right, 3 units down d) 6 units to the left,

More information

9 Transformations CHAPTER. Chapter Outline.

9 Transformations CHAPTER. Chapter Outline. Chapter 9 www.ck12.org CHAPTER 9 Transformations Chapter Outline 9.1 EXPLORING SYMMETRY 9.2 TRANSLATIONS AND VECTORS 9.3 REFLECTIONS 9.4 ROTATIONS 9.5 COMPOSITION OF TRANSFORMATIONS 9.6 DILATIONS 9.7 TESSELLATIONS

More information

MCC5.G.3 Understand that attributes belonging to a category of two-dimensional figures also belong to all subcategories of that categories.

MCC5.G.3 Understand that attributes belonging to a category of two-dimensional figures also belong to all subcategories of that categories. Fifth Grade Mathematics Unit 6 CONSTRUCTING TASK: Property Lists of Quadrilaterals Adapted from Van De Walle, Teaching Student-Centered Math pg. 207 The purpose of this task is for students to become familiar

More information

Slammin Sammy. Name Date. Finger. Shoulder. Back. Toe. Heel

Slammin Sammy. Name Date. Finger. Shoulder. Back. Toe. Heel Name Date Slammin Sammy Finger Shoulder Back Toe Heel (0, 0) Fist 1. Give the coordinates of Sammy s six body parts: Finger (, ) Shoulder (, ) Back (, ) Toe (, ) Heel (, ) Fist (, ) Classroom Strategies

More information

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles.

Geometry Practice. 1. Angles located next to one another sharing a common side are called angles. Geometry Practice Name 1. Angles located next to one another sharing a common side are called angles. 2. Planes that meet to form right angles are called planes. 3. Lines that cross are called lines. 4.

More information

Geometry ~ Unit 4

Geometry ~ Unit 4 Title Quadrilaterals and Coordinate Proof CISD Safety Net Standards: G.5A Big Ideas/Enduring Understandings Module 9 Properties of quadrilaterals can be used to solve real-world problems. Suggested Time

More information

Key Learning for Grade 3

Key Learning for Grade 3 Key Learning for Grade 3 The Ontario Curriculum: Mathematics (2005) Number Sense and Numeration Read, represent, compare and order whole numbers to 1000, and use concrete materials to investigate fractions

More information

Sequence of Geometry Modules Aligned with the Standards

Sequence of Geometry Modules Aligned with the Standards Sequence of Geometry Modules Aligned with the Standards Module 1: Congruence, Proof, and Constructions Module 2: Similarity, Proof, and Trigonometry Module 3: Extending to Three Dimensions Module 4: Connecting

More information

4.0 independently go beyond the classroom to design a real-world connection with polygons that represents a situation in its context.

4.0 independently go beyond the classroom to design a real-world connection with polygons that represents a situation in its context. ANDERSON Lesson plans!!! Intro to Polygons 10.17.16 to 11.4.16 Level SCALE Intro to Polygons Evidence 4.0 independently go beyond the classroom to design a real-world connection with polygons that represents

More information

August 3 - August 31

August 3 - August 31 Mathematics Georgia Standards of Excellence Geometry Parent Guide Unit 1 A All About Our Unit of Study Transformations in the Coordinate Plane August 3 - August 31 In this unit students will perform transformations

More information

Glossary Common Core Curriculum Maps Math/Grade 6 Grade 8

Glossary Common Core Curriculum Maps Math/Grade 6 Grade 8 Glossary Common Core Curriculum Maps Math/Grade 6 Grade 8 Grade 6 Grade 8 absolute value Distance of a number (x) from zero on a number line. Because absolute value represents distance, the absolute value

More information

Student Name: Teacher: Date: Miami-Dade County Public Schools. Test: 9_12 Mathematics Geometry Exam 2

Student Name: Teacher: Date: Miami-Dade County Public Schools. Test: 9_12 Mathematics Geometry Exam 2 Student Name: Teacher: Date: District: Miami-Dade County Public Schools Test: 9_12 Mathematics Geometry Exam 2 Description: GEO Topic 5: Quadrilaterals and Coordinate Geometry Form: 201 1. If the quadrilateral

More information

Geometry ~ Unit 2. Lines, Angles, and Triangles *CISD Safety Net Standards: G.6D

Geometry ~ Unit 2. Lines, Angles, and Triangles *CISD Safety Net Standards: G.6D Lines, Angles, and Triangles *CISD Safety Net Standards: G.6D Title Suggested Time Frame 1 st and 2 nd Six Weeks Suggested Duration: 30 Days Geometry Big Ideas/Enduring Understandings Module 4 Parallel

More information

Isometries: Teacher Notes

Isometries: Teacher Notes Isometries: Teacher Notes Henri Picciotto Acknowledgments Vinci Daro, Ann Shannon, and Celia Stevenson helped me with the original version of this document. Zalman Usiskin offered valuable feedback, some

More information

Name Period Date GRADE 7: MATHEMATICS COMMON CORE SUPPLEMENT ANGLES, DRAWINGS, AND ALGEBRAIC CONNECTIONS

Name Period Date GRADE 7: MATHEMATICS COMMON CORE SUPPLEMENT ANGLES, DRAWINGS, AND ALGEBRAIC CONNECTIONS Name Period Date 7-CORE3.1 Geometric Figures Measure and draw angles using a protractor. Review facts about interior angles of triangles and quadrilaterals. Find missing angle measures in geometric diagrams.

More information

Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review

Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review Geometry Unit 6 Properties of Quadrilaterals Classifying Polygons Review Polygon a closed plane figure with at least 3 sides that are segments -the sides do not intersect except at the vertices N-gon -

More information

POSITION, DIRECTION AND MOVEMENT Year 1 Year 2 Year 3 Year 4 Year 5 Year 6 Use mathematical

POSITION, DIRECTION AND MOVEMENT Year 1 Year 2 Year 3 Year 4 Year 5 Year 6 Use mathematical POSITION, DIRECTION AND MOVEMENT Year 1 Year 2 Year 3 Year 4 Year 5 Year 6 Use mathematical Use mathematical Describe positions on a Identify, describe and vocabulary to describe vocabulary to describe

More information

Introduction : Applying Lines of Symmetry

Introduction : Applying Lines of Symmetry Introduction A line of symmetry,, is a line separating a figure into two halves that are mirror images. Line symmetry exists for a figure if for every point P on one side of the line, there is a corresponding

More information

Building Concepts: Moving from Proportional Relationships to Linear Equations

Building Concepts: Moving from Proportional Relationships to Linear Equations Lesson Overview In this TI-Nspire lesson, students use previous experience with proportional relationships of the form y = kx to consider relationships of the form y = mx and eventually y = mx + b. Proportional

More information

Are You Ready? Triangle Sum Theorem

Are You Ready? Triangle Sum Theorem SKILL 30 Triangle Sum Theorem Teaching Skill 30 Objective Use the Triangle Sum Theorem to find the measures of missing angles. Have students read the Triangle Sum Theorem. Point out that the theorem is

More information

Students are not expected to work formally with properties of dilations until high school.

Students are not expected to work formally with properties of dilations until high school. Domain: Geometry (G) Cluster: Understand congruence and similarity using physical models, transparencies, or geometry software. Standard: 8.G.1. Verify experimentally the properties of rotations, reflections,

More information

By the end of this lesson, you should be able to answer these questions:

By the end of this lesson, you should be able to answer these questions: In earlier chapters you studied the relationships between the sides and angles of a triangle, and solved problems involving congruent and similar triangles. Now you are going to expand your study of shapes

More information

Name: Tutor s

Name: Tutor s Name: Tutor s Email: Bring a couple, just in case! Necessary Equipment: Black Pen Pencil Rubber Pencil Sharpener Scientific Calculator Ruler Protractor (Pair of) Compasses 018 AQA Exam Dates Paper 1 4

More information

Level 6 PROMPT sheet. 6/3 Divide a quantity into a given ratio. ~ Put headings ~Find how many shares in total ~ Amount no. shares = value of one share

Level 6 PROMPT sheet. 6/3 Divide a quantity into a given ratio. ~ Put headings ~Find how many shares in total ~ Amount no. shares = value of one share Level 6 PROMPT sheet 6/ Equivalent fractions, decimals & percentages Percentage to decimal to fraction 7 7% = 0.7 = 00 7 7% = 0.07 = 00 70 7 70% = 0.7 = = 00 0 6/ Divide a quantity into a given ratio ~

More information

Contents COORDINATE METHODS REGRESSION AND CORRELATION

Contents COORDINATE METHODS REGRESSION AND CORRELATION Contents UNIT 3 UNIT 4 COORDINATE METHODS Lesson 1 A Coordinate Model of a Plane.............. 162 Investigations 1 Representing Geometric Ideas with Coordinates............... 164 2 Reasoning with Slopes

More information

Guided Problem Solving

Guided Problem Solving -1 Guided Problem Solving GPS Student Page 57, Exercises 1 1: Match each rule with the correct translation. A. (x, y) (x, y 1 ) I. P(, 1) P (3, ) B. (x, y) (x 1 3, y) II. Q(3, 0) Q (3, ) C. (x, y) (x 1,

More information

8 Quadrilaterals. Before

8 Quadrilaterals. Before 8 Quadrilaterals 8. Find Angle Measures in Polygons 8. Use Properties of Parallelograms 8.3 Show that a Quadrilateral is a Parallelogram 8.4 Properties of Rhombuses, Rectangles, and Squares 8.5 Use Properties

More information

10.2 Trapezoids, Rhombi, and Kites

10.2 Trapezoids, Rhombi, and Kites 10.2 Trapezoids, Rhombi, and Kites Learning Objectives Derive and use the area formulas for trapezoids, rhombi, and kites. Review Queue Find the area the shaded regions in the figures below. 2. ABCD is

More information

Transformations. Working backwards is performing the inverse operation. + - and x 3. Given coordinate rule

Transformations. Working backwards is performing the inverse operation. + - and x 3. Given coordinate rule Transformations In geometry we use input/output process when we determine how shapes are altered or moved. Geometric objects can be moved in the coordinate plane using a coordinate rule. These rules can

More information

In this task, students will investigate the attributes of quadrilaterals.

In this task, students will investigate the attributes of quadrilaterals. PRACTICE TASK: Investigating Quadrilaterals In this task, students will investigate the attributes of quadrilaterals. STANDARDS FOR MATHEMATICAL CONTENT MCC5.G.3 Understanding that attributes belonging

More information

coordinate Find the coordinates of the midpoint of a segment having the given endpoints. Big Ideas Geometry from one end of a line

coordinate Find the coordinates of the midpoint of a segment having the given endpoints. Big Ideas Geometry from one end of a line G.(2) Coordinate and transformational geometry. The student uses the process skills to understand the connections between algebra and geometry and uses the one- and two-dimensional coordinate systems to

More information

MATH DICTIONARY. Number Sense. Number Families. Operations. Counting (Natural) Numbers The numbers we say when we count. Example: {0, 1, 2, 3, 4 }

MATH DICTIONARY. Number Sense. Number Families. Operations. Counting (Natural) Numbers The numbers we say when we count. Example: {0, 1, 2, 3, 4 } Number Sense Number Families MATH DICTIONARY Counting (Natural) Numbers The numbers we say when we count Example: {1, 2, 3, 4 } Whole Numbers The counting numbers plus zero Example: {0, 1, 2, 3, 4 } Positive

More information

Points, lines, angles

Points, lines, angles Points, lines, angles Point Line Line segment Parallel Lines Perpendicular lines Vertex Angle Full Turn An exact location. A point does not have any parts. A straight length that extends infinitely in

More information

Transformations & Basic Geometry Vocabulary

Transformations & Basic Geometry Vocabulary Transformations & Basic Geometry Vocabulary Key Terms and Concepts Name: Date: Period: Rigid Transformations Toolkit Key Vocabulary- Give a precise definition of each term Parallel lines: Perpendicular

More information

Gateway Regional School District VERTICAL ALIGNMENT OF MATHEMATICS STANDARDS Grades 5-8

Gateway Regional School District VERTICAL ALIGNMENT OF MATHEMATICS STANDARDS Grades 5-8 NUMBER SENSE & OPERATIONS 5.N.7 Compare and order whole numbers, positive fractions, positive mixed numbers, positive decimals, and percents. Fractions 1/2, 1/3, 1/4, 1/5, 1/10 and equivalent decimals

More information

Lesson 1. Unit 2 Practice Problems. Problem 2. Problem 1. Solution 1, 4, 5. Solution. Problem 3

Lesson 1. Unit 2 Practice Problems. Problem 2. Problem 1. Solution 1, 4, 5. Solution. Problem 3 Unit 2 Practice Problems Lesson 1 Problem 1 Rectangle measures 12 cm by 3 cm. Rectangle is a scaled copy of Rectangle. Select all of the measurement pairs that could be the dimensions of Rectangle. 1.

More information

5th Grade Mathematics Essential Standards

5th Grade Mathematics Essential Standards Standard 1 Number Sense (10-20% of ISTEP/Acuity) Students compute with whole numbers*, decimals, and fractions and understand the relationship among decimals, fractions, and percents. They understand the

More information

Stage 7 S7/3 Divide a quantity into a given ratio PROMPT sheet S7/1 Equivalent fractions, decimals & percentages Percentage to decimal to fraction

Stage 7 S7/3 Divide a quantity into a given ratio PROMPT sheet S7/1 Equivalent fractions, decimals & percentages Percentage to decimal to fraction Stage 7 PROMPT sheet S7/ Equivalent fractions, decimals & percentages Percentage to decimal to fraction 7 7% = 0.7 = 00 7 7% = 0.07 = 00 70 7 70% = 0.7 = = 00 0 S7/ Divide a quantity into a given ratio

More information

Reteach. Chapter 14. Grade 4

Reteach. Chapter 14. Grade 4 Reteach Chapter 14 Grade 4 Lesson 1 Reteach Draw Points, Lines, and Rays A point is an exact location that is represented by a dot. Example: point R R A line goes on forever in both directions. Example:

More information

Math 7, Unit 8: Geometric Figures Notes

Math 7, Unit 8: Geometric Figures Notes Math 7, Unit 8: Geometric Figures Notes Points, Lines and Planes; Line Segments and Rays s we begin any new topic, we have to familiarize ourselves with the language and notation to be successful. My guess

More information

Geometric Ideas. Name

Geometric Ideas. Name Geometric Ideas R 6-1 Lines, line segments, and rays are basic geometric ideas. They are sometimes described by the relationship they have to other lines, line segments, and rays. Draw Write Say Description

More information

Number Sense and Operations Curriculum Framework Learning Standard

Number Sense and Operations Curriculum Framework Learning Standard Grade 5 Expectations in Mathematics Learning Standards from the MA Mathematics Curriculum Framework for the end of Grade 6 are numbered and printed in bold. The Franklin Public School System s grade level

More information

Extra Practice 1A. Lesson 8.1: Parallel Lines. Name Date. 1. Which line segments are parallel? How do you know? a) b)

Extra Practice 1A. Lesson 8.1: Parallel Lines. Name Date. 1. Which line segments are parallel? How do you know? a) b) Extra Practice 1A Lesson 8.1: Parallel Lines 1. Which line segments are parallel? How do you know? a) b) c) d) 2. Draw line segment MN of length 8 cm. a) Use a ruler to draw a line segment parallel to

More information

Course Outlines. Elementary Mathematics (Grades K-5) Kids and Numbers (Recommended for K-1 students)

Course Outlines. Elementary Mathematics (Grades K-5) Kids and Numbers (Recommended for K-1 students) Course Outlines Elementary Mathematics (Grades K-5) Kids and Numbers (Recommended for K-1 students) Shapes and Patterns. Grouping objects by similar properties. Identifying simple figures within a complex

More information

L2 Translations, Reflections, and Rotations Pre-Assessment Per Date

L2 Translations, Reflections, and Rotations Pre-Assessment Per Date L Translations, Reflections, and Rotations.1 - Pre-Assessment Per Date Have you ever wanted to rearrange the furniture in your room? First you might want to make sure that the furniture would fit in the

More information

ACT SparkNotes Test Prep: Plane Geometry

ACT SparkNotes Test Prep: Plane Geometry ACT SparkNotes Test Prep: Plane Geometry Plane Geometry Plane geometry problems account for 14 questions on the ACT Math Test that s almost a quarter of the questions on the Subject Test If you ve taken

More information

An angle that has a measure less than a right angle.

An angle that has a measure less than a right angle. Unit 1 Study Strategies: Two-Dimensional Figures Lesson Vocab Word Definition Example Formed by two rays or line segments that have the same 1 Angle endpoint. The shared endpoint is called the vertex.

More information

Course Guide (/8/teachers/teacher_course_guide.html) Print (/8/teachers/print_materials.html) LMS (/8

Course Guide (/8/teachers/teacher_course_guide.html) Print (/8/teachers/print_materials.html) LMS (/8 (http://openupresources.org)menu Close OUR Curriculum (http://openupresources.org) Professional Development (http://openupresources.org/illustrative-mathematics-professional-development) Implementation

More information

202 The National Strategies Secondary Mathematics exemplification: Y7

202 The National Strategies Secondary Mathematics exemplification: Y7 202 The National Strategies Secondary Mathematics exemplification: Y7 GEOMETRY ND MESURES Pupils should learn to: Understand and use the language and notation associated with reflections, translations

More information

Working with Transformations on the Coordinate Plane

Working with Transformations on the Coordinate Plane Working with Transformations on the Coordinate Plane Movies create the illusion of movement by showing us 24 images per second. When the human eye processes 24 images per second it is interpreted in our

More information

Angles. An angle is: the union of two rays having a common vertex.

Angles. An angle is: the union of two rays having a common vertex. Angles An angle is: the union of two rays having a common vertex. Angles can be measured in both degrees and radians. A circle of 360 in radian measure is equal to 2π radians. If you draw a circle with

More information

Name Date Class. When the bases are the same and you multiply, you add exponents. When the bases are the same and you divide, you subtract exponents.

Name Date Class. When the bases are the same and you multiply, you add exponents. When the bases are the same and you divide, you subtract exponents. 2-1 Integer Exponents A positive exponent tells you how many times to multiply the base as a factor. A negative exponent tells you how many times to divide by the base. Any number to the 0 power is equal

More information

Section Congruence Through Constructions

Section Congruence Through Constructions Section 10.1 - Congruence Through Constructions Definitions: Similar ( ) objects have the same shape but not necessarily the same size. Congruent ( =) objects have the same size as well as the same shape.

More information

Measurement and Geometry (M&G3)

Measurement and Geometry (M&G3) MPM1DE Measurement and Geometry (M&G3) Please do not write in this package. Record your answers to the questions on lined paper. Make notes on new definitions such as midpoint, median, midsegment and any

More information

NOTES: TRANSFORMATIONS

NOTES: TRANSFORMATIONS TABLE OF CONTENT Plotting Points On A Coordinate Plane. Transformations. Translation. Reflections. Rotations Dilations. Congruence And Similarity.. Multiple Transformations In A Coordinate Plane. Parallel

More information

A M B O H W E V C T D U K Y I X. Answers. Investigation 1. ACE Assignment Choices. Applications. Note: The O has infinite lines of symmetry.

A M B O H W E V C T D U K Y I X. Answers. Investigation 1. ACE Assignment Choices. Applications. Note: The O has infinite lines of symmetry. Answers Investigation ACE Assignment Choices Problem. Core 9 Other Connections ; unassigned choices from previous problems Problem.2 Core 0 7, 4 40 Other Applications 8, 9; Connections 4 45; Extensions

More information

The National Strategies Secondary Mathematics exemplification: Y8, 9

The National Strategies Secondary Mathematics exemplification: Y8, 9 Mathematics exemplification: Y8, 9 183 As outcomes, Year 8 pupils should, for example: Understand a proof that the sum of the angles of a triangle is 180 and of a quadrilateral is 360, and that the exterior

More information

Objective: Reason about attributes to construct quadrilaterals on square or triangular grid paper.

Objective: Reason about attributes to construct quadrilaterals on square or triangular grid paper. Lesson 16 Objective: Reason about attributes to construct quadrilaterals on square or Suggested Lesson Structure Fluency Practice Application Problem Concept Development Student Debrief Total Time (12

More information

Mathematics. Accelerated GSE Algebra I/Geometry A Unit 7: Transformations in the Coordinate Plane

Mathematics. Accelerated GSE Algebra I/Geometry A Unit 7: Transformations in the Coordinate Plane Georgia Standards of Excellence Frameworks Mathematics Accelerated GSE Algebra I/Geometry A Unit 7: Transformations in the Coordinate Plane These materials are for nonprofit educational purposes only.

More information

Review of 7 th Grade Geometry

Review of 7 th Grade Geometry Review of 7 th Grade Geometry In the 7 th Grade Geometry we have covered: 1. Definition of geometry. Definition of a polygon. Definition of a regular polygon. Definition of a quadrilateral. Types of quadrilaterals

More information

Unit 1, Activity 1, Extending Number and Picture Patterns Geometry

Unit 1, Activity 1, Extending Number and Picture Patterns Geometry Unit 1, Activity 1, Extending Number and Picture Patterns Geometry Blackline Masters, Geometry Page 1-1 Unit 1, Activity 1, Extending Number and Picture Patterns Date Name Extending Patterns and Sequences

More information

Applications. 40 Shapes and Designs. 1. Tell whether each diagram shows an angle formed by a wedge, two sides meeting at a common point, or a turn.

Applications. 40 Shapes and Designs. 1. Tell whether each diagram shows an angle formed by a wedge, two sides meeting at a common point, or a turn. Applications. Tell whether each diagram shows an angle formed by a wedge, two sides meeting at a common point, or a turn. a. b. c. 2. Give the degree measure of each turn. a. One right-angle turn b. Four

More information