Technical English -I 5 th week SURVEYING AND MAPPING

Total Station & Distomat

UNIT 6 Total Station & Distomat Learning Objectives After studying this unit, the student will be able to Understand the parts of Total station Temporary adjustments of total station Measurement of horizontal

PHILADELPHIA UNIVERSITY Faculty of Engineering. Department of Civil Engineering. SURVEYING. Chapter 3. Leveling

PHILADELPHIA UNIVERSITY Faculty of Engineering. Department of Civil Engineering. SURVEYING Chapter 3 Leveling Leveling Leveling: the operation of determining the difference in elevation between points.

CE 260 SURVEYING CHAPTER 5 THEODOLITES

CE 260 SURVEYING CHAPTER 5 THEODOLITES General Background: Theodolites or Transits are surveying instruments designed to precisely measure horizontal and vertical angles. 1 They are used to establish straight

ENGI 3703 Surveying and Geomatics

Differential Level Errors We discussed the Canadian datum used in leveling and leveling methods and equipment in the field practice. However, there are a number of errors that we should consider in more

Trigonometry for Surveyors p. 1 Trigonometry p. 1 Angles and Their Measurement p. 1 Expressing the Fractional Part of a Degree in Minutes and Seconds

Trigonometry for Surveyors p. 1 Trigonometry p. 1 Angles and Their Measurement p. 1 Expressing the Fractional Part of a Degree in Minutes and Seconds p. 1 Expressing an Arc in Radians p. 2 Angle Conversions

SSC-JE CIVIL ENGINEERING STUDY MATERIAL SURVEYING ENGINEERING STAFF SELECTION COMMISSION SURVEYING. Page 1 of 98 SSC-JE CIVIL ENGINEERING

Page 1 of 98 SSC-JE STAFF SELECTION COMMISSION CIVIL ENGINEERING STUDY MATERIAL ENGINEERING Page 2 of 98 SSC-JE Civil Engineering : Surveying syllabus Surveying: Principles of surveying, measurement of

TOPOGRAPHICAL AND SITE SURVEY (Standard Of Procedure)

FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES ENGINEERING SURVEY FIELDWORK TOPOGRAPHICAL AND SITE SURVEY (Standard Of Procedure) Subject Code Date Group Number Student Name & ID Number Group Member Name

Pack 11. Surveying processes. Equipment 11.1 Method 11.2 Using the recorded data to calculate the height of the building 11.3

Pack 11 Surveying processes Equipment 11.1 Method 11.2 Using the recorded data to calculate the height of the building 11.3 Pack 11 Surveying processes 11.1 Equipment The objective is to measure the height

CHAPTER 01 Basics of Surveying

CHAPTER 01 Basics of Surveying 1.1 How do plane surveys and geodetic surveys differ? Plane surveying assumes all horizontal measurements are taken on a single plane and all vertical measurements are relative

SREE VAHINI INSTITUTE OF SCIENCE AND TECHNOLOGY

EXPERIMENT NO: 1 DATE: STUDY OF THEODOLITE AIM To study about the Temporary and Permanent adjustments of a Theodolite ADJUSTMENTS OF THEODOLITE The Theodolite should be properly adjusted to obtain accurate

SURVEYING-II(5 TH CIVIL) CHAPTER-1 Name of the Chapter - Leveling

SURVEYING-II(5 TH CIVIL) CHAPTER-1 Name of the Chapter - Leveling 1. Define parallax. [2012] The apparent movement of image relative to the cross hair is known as parallax. This occurs due to imperfect

Spring Term. Lecturer: Assoc. Prof. Dr. M. Zeki COŞKUN. Department of Geomatics Engineering

2009 2010 Spring Term Lecturer: Assoc. Prof. Dr. M. Zeki COŞKUN Department of Geomatics Engineering e-mail : coskun@itu.edu.tr LEVELLING What is Levelling? Use of Levelling Levelling Terminology Types

Fundamentals and Practices Sixth Edition

Online Instructor s Manual to accompany Surveying Fundamentals and Practices Sixth Edition Jerry Nathanson Michael T. Lanzafama Philip Kissam Upper Saddle River, New Jersey Columbus, Ohio Copyright 2011

Software for Land Development Professionals

Software for Land Development Professionals SurvNET Carlson SurvNET is SurvCADD's Network Least Squares Reduction (NLSA) program. This module will perform a least squares adjustment and statistical analysis

Surveying Prof. Bharat Lohani Indian Institute of Technology, Kanpur. Lecture - 1 Module - 6 Triangulation and Trilateration

Surveying Prof. Bharat Lohani Indian Institute of Technology, Kanpur Lecture - 1 Module - 6 Triangulation and Trilateration (Refer Slide Time: 00:21) Welcome to this another lecture on basic surveying.

UNIVERSITI MALAYSIA SARAWAK FACULTY OF ENGINEERING CIVIL ENGINEERING DEPARTMENT

UNIVERSITI MALAYSIA SARAWAK FACULTY OF ENGINEERING CIVIL ENGINEERING DEPARTMENT KNS 1461 CIVIL ENGINEERING LABORATORY 2 LABORATORY MANUAL (Edited : December 2008) CIVIL ENGINEERING LABORATORY 2 KNS 1461

Faculty:-Prof. Mrs. N. Soundarya Semester:-III Class: - C.E. Course Code:-CE -207-F

Lecture Plan-1 Subject: Surveying-I Unit:- I Fundamental Principals of Surveying Section-A Topic :-Definition, Objects, Classification, Fundamental Principles, Methods of Fixing Stations 1. A brief introduction

The Study for Mapping Policy and Topographic Mapping for Integrated National Development Plan in the Republic of the Philippines

The Study for Mapping Policy and Topographic Mapping for Integrated National Development Plan in the Republic of the Philippines Japan International Cooperation Agency (JICA) National Mapping and Resources

CHAPTER 10. Digital Mapping and Earthwork

CHAPTER 10 Digital Mapping and Earthwork www.terrainmap.com/rm22.html CE 316 March 2012 348 10.1 Introduction 349 10.2 Single Images 10.2.1 Rectified Photograph With a single photograph, X,Y data can be

Surveying I. Lecture 1.

Surveying I. Lecture 1. Outline Introduction Historical Surveying Surveying - Science and Profession Methods of height determination Levelling The surveyors level Course details: First part of a two-semester-course

DRONACHARYA GROUP OF INSTITUTIONS, GREATER NOIDA Department of CIVIL Engineering Semester: III Branch: CIVIL Session: Subject: Surveying Lab

DRONACHARYA GROUP OF INSTITUTIONS, GREATER NOIDA Department of CIVIL Engineering Semester: III Branch: CIVIL Session: 2015-16 Subject: Surveying Lab 1. To measure bearings of a closed traverse by prismatic

Assessing the Accuracy of Stockpile Volumes Obtained Through Aerial Surveying

CASE STUDY Assessing the Accuracy of Stockpile Volumes Obtained Through Aerial Surveying Martin Remote Sensing share surveying insight DroneDeploy Introduction This report comes to us from Kelsey Martin,

1. In chain surveying tie lines are primarily provided a) to check the accuracy of the survey b) to take offsets for detail survey c) to avoid long

1. In chain surveying tie lines are primarily provided a) to check the accuracy of the survey b) to take offsets for detail survey c) to avoid long offsets from chain lines d) to increase the number of

II/IV B.Tech (Regular/supply) Examination (Nov-2016) First Sem Surveying I (14CE303) Civil Engineering. (Scheme of Evaluation)

II/IV B.Tech (Regular/supply) Examination (Nov-2016) First Sem Surveying I (14CE303) Civil Engineering (Scheme of Evaluation) 1. Answer all questions [(11 x 1 = 11M )+ (1x2= 2M), Total = 12 M] a. What

Cabrillo College Engineering 1A - Surveying LABORATORY NO. 4 --- THEODOLITE: ANGLE ABOUT A POINT Objectives: To measure the angles about a point by repetition using a theodolite. Equipment: Theodolite,

ADVANCED SURVEYING (S-II)

ADVANCED SURVEYING (S-II) (LAB) KISHANGANJ COLLEGE OF ENGINEERING AND TECHNOLOGY, KISHANGANJ. Experiment No- 1 ADVANCED SURVEYING (S-II) LAB Aim: Determination of the Multiplying and additive constant

Angles and Directions

Angles and Directions Angles and Directions Definitions Systems of Angle Measurement Angle Arithmetic Horizontal and Vertical Angles Angle and Direction Measuring Equipment 1 Angle Definitions A measure

II/IV B.Tech (Regular/Supply) Degree Examination (Nov-2017) I SEM SURVEYING - I (14CE303) (CIVIL ENGINEERING) Scheme of Evaluation

II/IV B.Tech (Regular/Supply) Degree Examination (Nov-2017) I SEM SURVEYING - I (14CE303) (CIVIL ENGINEERING) Scheme of Evaluation Prepared by Head of the Department Y. Ravi Dr. Ch. Naga Satish Kumar Assistant

MAHATMA GANDHI MISSION S JAWAHARLAL NEHRU ENGINEERING COLLEGE, AURANGABAD. (M.S.)

MAHATMA GANDHI MISSION S JAWAHARLAL NEHRU ENGINEERING COLLEGE, AURANGABAD. (M.S.) DEPARTMENT OF CIVIL ENGINEERING SURVEYING - I LAB MANUAL Prof.R.V.Wanjule Lab Incharge Approved By Dr. S. B. Shinde H.O.D.

5 Classifications of Accuracy and Standards

5 Classifications of Accuracy and Standards 5.1 Classifications of Accuracy All surveys performed by Caltrans or others on all Caltrans-involved transportation improvement projects shall be classified

Topic 5: THEODOLITE TABLE OF CONTENTS

Unit CIV2202 Surveying 5.1 Topic 5: THEODOLITE TABLE OF CONTENTS PREVIEW...5.3 Introduction...5.3 Objectives...5.3 Readings...5.3 THEODOLITE...5.4 BASIC OPTO-MECHANICAL THEODOLITE...5.4 MODERN, OPTICAL

Section G. POSITIONAL ACCURACY DEFINITIONS AND PROCEDURES Approved 3/12/02

Section G POSITIONAL ACCURACY DEFINITIONS AND PROCEDURES Approved 3/12/02 1. INTRODUCTION Modern surveying standards use the concept of positional accuracy instead of error of closure. Although the concepts

R13 PART-A PART-B. 2. a) Explain method of intersection in Plane table surveying b) What is error of closure? How is it balanced graphically?

SET - 1 1. a) Write the classifications of surveying? b) Distinguish between closed traverse and open traverse. c) Define contouring. What do you understand by contour interval and on what factors it depends?

Level 6 Graduate Diploma in Engineering Engineering surveying

9210-104 Level 6 Graduate Diploma in Engineering Engineering surveying Sample Paper You should have the following for this examination answer booklets non-programmable calculator pens, pencils, drawing

Contour Analysis And Visualization

Contour Analysis And Visualization Objectives : stages The objectives of Contour Analysis and Visualization can be described in the following 1. To study and analyse the contour 2. Visualize the contour

Overview. Profile 2/27/2018. CE 371 Surveying PROFILE LEVELING & Trigonometric LEVELING

Lec 10 + Lec 11 CE 371 Surveying PROFILE LEVELING & Trigonometric LEVELING Dr. Ragab Khalil Department of Landscape Architecture Faculty of Environmental Design King AbdulAziz University Room LIE15 Overview

Fundamentals of Surveying MSS 220 Prof. Gamal El-Fiky

Fundamentals of Surveying MSS 220 Prof. Gamal l-fiky Maritime Studies Department, Faculty of Marine Science King Abdulaziz University gamal_elfiky@yahoo.com Room 221 What is Surveying? Surveying is defined

UNIT 22. Remote Sensing and Photogrammetry. Start-up. Reading. In class discuss the following questions:

UNIT 22 Remote Sensing and Photogrammetry Start-up In class discuss the following questions: A. What do you know about remote sensing? B. What does photogrammetry do? C. Is there a connection between the

Surveying Laboratory

Surveying Laboratory By: Dr. Ghazi Al-Khateeb Jordan University of Science and Technology Department of Civil Engineering 1. Length of Pace Using Tape and Odometer Length of Pace Using Tape and Odometer

1. Introduction Surveying Method chosen depends on:

1. Introduction Surveying Method chosen depends on: by the purpose of the survey e.g. map making, location of specific points, definition of land ownership etc., by the nature of the survey itself e.g.

Digital photogrammetry project with very high-resolution stereo pairs acquired by DigitalGlobe, Inc. satellite Worldview-2

White PAPER Greater area of the City of La Paz, Bolivia Digital photogrammetry project with very high-resolution stereo pairs acquired by DigitalGlobe, Inc. satellite Worldview-2 By: Engineers Nelson Mattie,

Tacheometric Surveying STUDY NOTES

Tacheometric Surveying STUDY NOTES Unit - II Tacheometric is a branch of surveying in which horizontal and vertical distances are determined by taking angular observation with an instrument known as a

GPS/GIS Activities Summary

GPS/GIS Activities Summary Group activities Outdoor activities Use of GPS receivers Use of computers Calculations Relevant to robotics Relevant to agriculture 1. Information technologies in agriculture

ENGI 3703 Surveying and Geomatics

Angle Measurement: (Chapter 8) We have provided good coverage of distance measurement with total stations. However, our treatment of angle coverage will be light as this is covered adequately in the field

TERRESTRIAL AND NUMERICAL PHOTOGRAMMETRY 1. MID -TERM EXAM Question 4

TERRESTRIAL AND NUMERICAL PHOTOGRAMMETRY 1. MID -TERM EXAM Question 4 23 November 2001 Two-camera stations are located at the ends of a base, which are 191.46m long, measured horizontally. Photographs

SurvNET Lesson One - Processing an Assumed Coordinate System 2D Total Station Network

SurvNET Lesson One - Processing an Assumed Coordinate System 2D Total Station Network This tutorial is divided into two lessons covering the process of reducing and adjusting raw survey data into final

(a) Barometric levelling (b) Trigonometric levelling (c) Spirit levelling [16]

Code No: R050210103 Set No. 1 II B.Tech I Semester Supplementary Examinations, February 2007 SURVEYING (Civil Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal

LAB MANUAL. Department of Civil Engineering CE6407 SURVEY PRACTICAL II CHENNAI INSTITUTE OF TECHNOLOGY CHENNAI Survey Practical - II

Department of Civil Engineering LAB MANUAL CE6407 SURVEY PRACTICAL II CE2259 SURVEY PRACTICAL II INDEX LIST OF EXPERIMENTS Sl.No DATE NAME OF THE EXPERIMENT MARKS SIGN 1 Study of Theodolite 2 Measurement

USE OF EDM AND PROPER REDUCTION OF OBSERVATIONS

USE OF EDM AND PROPER REDUCTION OF OBSERVATIONS INTRODUCTION EDM stands for Electronic Distance Measurement. There are two basic types of EDM equipment, electro-optical (lightwaves) and electromagnetic

Many of the following steps can be saved as default so when a new project is created, the settings need not be re-entered.

Carlson SurvNET The heart and sole of any survey software package is in its data processing and adjustment program. SurvNET is a least squares adjustment program that allows you to perform a mathematically

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION (Autonomous) (ISO/IEC Certified)

WINTER 17 EXAMINATION Subject Name: Advanced Surveying Model Answer Subject Code: 17419 Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given

THE USE OF TERRESTRIAL LASER SCANNING FOR MEASUREMENTS IN SHALLOW-WATER: CORRECTION OF THE 3D COORDINATES OF THE POINT CLOUD

Photogrammetry and Remote Sensing Published as: Deruyter, G., Vanhaelst, M., Stal, C., Glas, H., De Wulf, A. (2015). The use of terrestrial laser scanning for measurements in shallow-water: correction

Introduction Photogrammetry Photos light Gramma drawing Metron measure Basic Definition The art and science of obtaining reliable measurements by mean

Photogrammetry Review Neil King King and Associates Testing is an art Introduction Read the question Re-Read Read The question What is being asked Answer what is being asked Be in the know Exercise the

FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES ENGINEERING SURVEY FIELDWORK. CURVE RANGING COMPUTATION & SETTING-OUT (Standard Of Procedure)

FACULTY OF CIVIL ENGINEERING & EARTH RESOURCES ENGINEERING SURVEY FIELDWORK CURVE RANGING COMPUTATION & SETTING-OUT (Standard Of Procedure) Subject Code Date Group Number Student Name & ID Number Group

Question: What are the origins of the forces of magnetism (how are they produced/ generated)?

This is an additional material to the one in the internet and may help you to develop interest with the method. You should try to integrate some of the discussions here while you are trying to answer the

Surveying like never before

CAD functionalities GCP Mapping and Aerial Image Processing Software for Land Surveying Specialists Surveying like never before www.3dsurvey.si Modri Planet d.o.o., Distributors: info@3dsurvey.si +386

Exploring GIS Data. I) GIS Data Models-Definitions II) Database Management System III) Data Source & Collection IV) Data Quality

Exploring GIS Data I) GIS Data Models-Definitions II) Database Management System III) Data Source & Collection IV) Data Quality 1 Geographic data Model Definitions: Data : A collection of related facts

Chapters 1 7: Overview

Chapters 1 7: Overview Chapter 1: Introduction Chapters 2 4: Data acquisition Chapters 5 7: Data manipulation Chapter 5: Vertical imagery Chapter 6: Image coordinate measurements and refinements Chapter

About LIDAR Data. What Are LIDAR Data? How LIDAR Data Are Collected

1 of 6 10/7/2006 3:24 PM Project Overview Data Description GIS Tutorials Applications Coastal County Maps Data Tools Data Sets & Metadata Other Links About this CD-ROM Partners About LIDAR Data What Are

Michigan Department of Transportation

Michigan Department of Transportation Design Survey Manual Table of Contents Part I: Principles of Surveying 1.1 Surveying, Defined 1.2 Types of Survey 1.2.1 Plane 1.2.2 Geodetic 1.3 Datums 1.3.1 Horizontal

SLR, Climate Change, Infrastructure Solutions, Adaption and GIS

Presenters: Francisco D Elia B.S., M.Sc. Geographic Information Systems Franciscodelia@miamibeachfl.gov Nestor Navarro, GISP, MCSA GIS Manager Nestornavarro@miamibeachfl.gov Data Acquisition, Integration

Index. Back bearing 138 Back sight 28 Back station 133 Balancing line 325 choice of 329 example of its use in costing earthmoving

Index Abney level 88 Absolute Minimum Radius 240, 241 Accuracy in building 335,377,378 Accuracy of computation 147 Accuracy of setting out 338,378 Additive constant 100 Agent 336 Alidade 55 Alignment 261,366,372

Remote sensing In situ T, S and tracers Velocity Observing systems. Course url: Talley SIO 210 (2013)

SIO 210: I. Observational methods and II. Data analysis (combined single lecture) Fall 2013 I. Observations Reading: DPO 6.1, S16.1, S16.4, S16.5, S16.9 Remote sensing In situ T, S and tracers Velocity

Contents of Lecture. Surface (Terrain) Data Models. Terrain Surface Representation. Sampling in Surface Model DEM

Lecture 13: Advanced Data Models: Terrain mapping and Analysis Contents of Lecture Surface Data Models DEM GRID Model TIN Model Visibility Analysis Geography 373 Spring, 2006 Changjoo Kim 11/29/2006 1

Purpose : Understanding Projections, 12D, and the System 1200.

Purpose : Understanding Projections, 12D, and the System 1200. 1. For any Cad work created inside 12D, the distances entered are plane (Horizontal Chord) distances. 2. Setting a projection, or changing

The 2012 Warkworth Observatory Local Tie Survey

The 2012 Warkworth Observatory Local Tie Survey Land Information New Zealand Record A1387321 Contents Executive Summary... 5 Acknowledgements... 5 1. Introduction... 1 2. Site Description... 2 3. Instrumentation...

N.J.P.L.S. An Introduction to LiDAR Concepts and Applications

N.J.P.L.S. An Introduction to LiDAR Concepts and Applications Presentation Outline LIDAR Data Capture Advantages of Lidar Technology Basics Intensity and Multiple Returns Lidar Accuracy Airborne Laser

LiDAR data overview. Dr. Keiko Saito Global Facility for Disaster Reduction and Recovery (GFDRR)

LiDAR data overview Dr. Keiko Saito Global Facility for Disaster Reduction and Recovery (GFDRR) LiDAR (Light Detecting And Ranging) 3D height profile Laser emitted from sensor onboard aircraft to measure

RAILWAY PROJECT Geodetic Reference System, Geodetic Control Network and Rail Construction Measurements

RAILWAY PROJECT Geodetic Reference System, Geodetic Control Network and Rail Construction Measurements Railway Project 2 / 8 INDEX 1 Introduction... 3 2 Reference System... 3 2.1 Reference system... 3

An Introduction to Lidar & Forestry May 2013

An Introduction to Lidar & Forestry May 2013 Introduction to Lidar & Forestry Lidar technology Derivatives from point clouds Applied to forestry Publish & Share Futures Lidar Light Detection And Ranging

a Geo-Odyssey of UAS LiDAR Mapping Henno Morkel UAS Segment Specialist DroneCon 17 May 2018

a Geo-Odyssey of UAS LiDAR Mapping Henno Morkel UAS Segment Specialist DroneCon 17 May 2018 Abbreviations UAS Unmanned Aerial Systems LiDAR Light Detection and Ranging UAV Unmanned Aerial Vehicle RTK Real-time

ATNS. USING Google EARTH. Version 1

ATNS USING Google EARTH Version 1 ATNS/HO/Using Google Earth Page 1 25/04/2013 CONTENTS 1. BASIC SETUP 2. NAVIGATING IN GOOGLE EARTH 3. ADDING OBJECTS TO GOOGLE EARTH 4. USER HELP REFERENCES ATNS/HO/Using

Pack 12. Surveying processes. Equipment 12.1 Method 12.2 Checklist 12.3 Calculations 12.4

Pack 1 Surveying processes Equipment 1.1 Method 1. Checklist 1.3 Calculations 1.4 Pack 1 Surveying processes 1.1 Equipment The objective is to measure the height of an inaccessible building using angles.

An Overview of Applanix.

An Overview of Applanix The Company The Industry Leader in Developing Aided Inertial Technology Founded on Canadian Aerospace and Defense Industry Expertise Providing Precise Position and Orientation Systems

Digital Elevation Models

Digital Elevation Models National Elevation Dataset 1 Data Sets US DEM series 7.5, 30, 1 o for conterminous US 7.5, 15 for Alaska US National Elevation Data (NED) GTOPO30 Global Land One-kilometer Base

Map Compilation CHAPTER HISTORY

CHAPTER 7 Map Compilation 7.1 HISTORY Producing accurate commercial maps from aerial photography began in the 1930s. The technology of stereomapping over the last 70 years has brought vast technological

EMIGMA V9.x Premium Series April 8, 2015

EMIGMA V9.x Premium Series April 8, 2015 EMIGMA for Gravity EMIGMA for Gravity license is a comprehensive package that offers a wide array of processing, visualization and interpretation tools. The package

GUDLAVALLERU ENGINEERING COLLEGE SESHADRI RAO KNOWLEDGE VILLAGE: GUDLAVALLERU DEPARTMENT OF CIVIL ENGINEERING

SURVEYING FIELD WORK II LABORATORY Name Regd. No : :. Year & Semester :.. Academic Year :. GUDLAVALLERU ENGINEERING COLLEGE SESHADRI RAO KNOWLEDGE VILLAGE: GUDLAVALLERU DEPARTMENT OF CIVIL ENGINEERING

Make a TOPOGRAPHIC MAP

How can you make a topographic map, and what information can you get from it? Activity Overview To build the Panama Canal, engineers dammed the Chagres River. In the process, new lakes were formed, a valley

3GSM GmbH. Plüddemanngasse 77 A-8010 Graz, Austria Tel Fax:

White Paper Graz, April 2014 3GSM GmbH Plüddemanngasse 77 A-8010 Graz, Austria Tel. +43-316-464744 Fax: +43-316-464744-11 office@3gsm.at www.3gsm.at Measurement and assessment of rock and terrain surfaces

Reduction of Field Observations

Reduction of Field Observations GNSS/GPS measurements or Latitudes, Longitudes, HAE: We re interested in projected coordinates, e.g., State Plane Survey measurements in a projected coordinate system, on

Total station assignment

Total station assignment Objective: Control survey densification for detail surveying Location: Otaniemi campus, Innopoli 3 park area Equipment: Total Station (or electronic theodolite) and target device

Trimble VISION Positions from Pictures

Trimble VISION Positions from Pictures This session will cover What Is Trimble VISION? Trimble VISION Portfolio What Do you Need? How Does It Work & How Accurate Is It? Applications Resources Trimble VISION

A 3D Scanner Based Technology for Land Levelling

A 3D Scanner Based Technology for Land Levelling Kunal Chakraborti, Rupam Ghosh Student, Dept of Civil Engineering, Modern Institute of Engineering & Technology, Bandel, Hooghly, West Bengal, India ABSTRACT:

Microwave. Infrared. Preprogrammed Chip

Advanced Technology for Design Mapping and Construction Layout AACE A.A.C.E. Meeting August 5, 2009 Daniel K. Mardock RBF Consulting Survey Manager Registered Land Surveyor Certified Federal Surveyor Arizona

ACCURACY ANALYSIS FOR NEW CLOSE-RANGE PHOTOGRAMMETRIC SYSTEMS

ACCURACY ANALYSIS FOR NEW CLOSE-RANGE PHOTOGRAMMETRIC SYSTEMS Dr. Mahmoud El-Nokrashy O. ALI Prof. of Photogrammetry, Civil Eng. Al Azhar University, Cairo, Egypt m_ali@starnet.com.eg Dr. Mohamed Ashraf

Merging LiDAR Data with Softcopy Photogrammetry Data

Merging LiDAR Data with Softcopy Photogrammetry Data Cindy McCallum WisDOT\Bureau of Technical Services Surveying & Mapping Section Photogrammetry Unit Overview Terms and processes Why use data from LiDAR

SURVEY PRACTICAL LABORATARY MANUAL SUB:CODE - 407

SURVEY PRACTICAL LABORATARY MANUAL SUB:CODE - 407 TACHEOMETRY Tacheometry is the branch of surveying in which horizontal and vertical distances are determined by taking angular observations with an instrument

2/9/2016. Session Agenda: Implementing new Geospatial Technologies for more efficient data capture

Implementing new Geospatial Technologies for more efficient data capture Jay Haskamp Applied Geospatial Engineer Steve Richter VP Sales Session Agenda: Today s changing technologies and what lies ahead

Engineering Geology. Engineering Geology is backbone of civil engineering. Topographic Maps. Eng. Iqbal Marie

Engineering Geology Engineering Geology is backbone of civil engineering Topographic Maps Eng. Iqbal Marie Maps: are a two dimensional representation, of an area or region. There are many types of maps,

STARTING WITH DRONES. Data Collection and Remote Sensing with UAVs, etc. Dr. Bill Hazelton LS

STARTING WITH DRONES Data Collection and Remote Sensing with UAVs, etc. Dr. Bill Hazelton LS What this Talk is About UAV-based data acquisition: What you need to get involved Processes in getting spatial

The Accuracy of Determining the Volumes Using Close Range Photogrammetry

IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 12, Issue 2 Ver. VII (Mar - Apr. 2015), PP 10-15 www.iosrjournals.org The Accuracy of Determining

KOMAR UNIVERISTY OF SCIENCE AND TECHNOLOGY

KOMAR UNIVERISTY OF SCIENCE AND TECHNOLOGY COLLEGE OF ENGINEERING CIVIL ENGINEERING DEPARTMENT Engineering Surveying Manual Prepared by Sardasht Sardar Assistant Lecturer at KUST Contents Experiment No.1:

Lab #5 Ocean Acoustic Environment

Lab #5 Ocean Acoustic Environment 2.S998 Unmanned Marine Vehicle Autonomy, Sensing and Communications Contents 1 The ocean acoustic environment 3 1.1 Ocean Acoustic Waveguide................................

ArcMap as a quality assurance tool in Photogrammetry Ron Frederiks. Abstract

ArcMap as a quality assurance tool in Photogrammetry Ron Frederiks Abstract This paper presents the use of ArcMap, 3-D Analyst, Spatial Analyst and Ianko s ETGeoWizards to perform quality assurance of

Lesson 7 Determining Direction. Key Terms. azimuth back azimuth degree grid azimuth grid north magnetic azimuth magnetic north true north

Lesson 7 Determining Direction U.S. ARMY Key Terms J R O T C azimuth back azimuth degree grid azimuth grid north magnetic azimuth magnetic north true north WHAT YOU WILL LEARN TO DO Calculate direction

SURVEY 3.0. Innovative field solutions for Surveyors X PAD. works when you do

Innovative field solutions for Surveyors works when you do X PAD INNOVATIVE FIELD SOLUTION FOR SURVEYORS The software for survey, stakeout and control, ensuring productivity and flexibility in the field,

Overview. 1. Aerial LiDAR in Wisconsin (20 minutes) 2. Demonstration of data in CAD (30 minutes) 3. High Density LiDAR (20 minutes)

Overview 1. Aerial LiDAR in Wisconsin (20 minutes) 2. Demonstration of data in CAD (30 minutes) 3. High Density LiDAR (20 minutes) 4. Aerial lidar technology advancements (15 minutes) 5. Q & A 1. Aerial

Terrestrial GPS setup Fundamentals of Airborne LiDAR Systems, Collection and Calibration. JAMIE YOUNG Senior Manager LiDAR Solutions

Terrestrial GPS setup Fundamentals of Airborne LiDAR Systems, Collection and Calibration JAMIE YOUNG Senior Manager LiDAR Solutions Topics Terrestrial GPS reference Planning and Collection Considerations

Overview of the Trimble TX5 Laser Scanner

Overview of the Trimble TX5 Laser Scanner Trimble TX5 Revolutionary and versatile scanning solution Compact / Lightweight Efficient Economical Ease of Use Small and Compact Smallest and most compact 3D