McAfee Cloud Identity Manager

Transcription

1 WebExConnect Cloud Connector Guide McAfee Cloud Identity Manager version 3.5 or later

2 COPYRIGHT Copyright 2013 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of McAfee, Inc., or its suppliers or affiliate companies. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, Avert, epo, epolicy Orchestrator, Foundstone, GroupShield, IntruShield, LinuxShield, MAX (McAfee SecurityAlliance Exchange), NetShield, PortalShield, Preventsys, SecureOS, SecurityAlliance, SiteAdvisor, SmartFilter, Total Protection, TrustedSource, Type Enforcement, VirusScan, and WebShield are registered trademarks or trademarks of McAfee, Inc. or its subsidiaries in the United States and other countries. LICENSE INFORMATION License Agreement NOTICE TO ALL USERS: CAREFULLY READ THE APPROPRIATE LEGAL AGREEMENT CORRESPONDING TO THE LICENSE YOU PURCHASED, WHICH SETS FORTH THE GENERAL TERMS AND CONDITIONS FOR THE USE OF THE LICENSED SOFTWARE. IF YOU DO NOT KNOW WHICH TYPE OF LICENSE YOU HAVE ACQUIRED, PLEASE CONSULT THE SALES AND OTHER RELATED LICENSE GRANTOR PURCHASE ORDER DOCUMENTS THAT ACCOMPANIES YOUR SOFTWARE PACKAGING OR THAT YOU HAVE RECEIVED SEPARATELY AS PART OF THE PURCHASE (AS A BOOKLET, A FILE ON THE PRODUCT CD, OR A FILE AVAILABLE ON THE WEBSITE FROM WHICH YOU DOWNLOADED THE SOFTWARE PACKAGE). IF YOU DO NOT AGREE TO ALL OF THE TERMS SET FORTH IN THE AGREEMENT, DO NOT INSTALL THE SOFTWARE. IF APPLICABLE, YOU MAY RETURN THE PRODUCT TO MCAFEE OR THE PLACE OF PURCHASE FOR A FULL REFUND. 2 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

3 Contents 1.0 Introduction to McAfee Cloud Identity Manager Supported environments Supported browsers Application portal Management Console Available documentation Technical support Configuring SSO for a WebEx Connect user Install and enable the WebEx Connect client on Windows Certificate management Export a Cloud Identity Manager certificate for WebEx Connect Configure SSO using the WebEx Connect Administration Tool Configuring a WebExConnect Cloud Connector Select the cloud application type Specifying an Identity Connector Select an existing Identity Connector Create a new Identity Connector Configure SAML credential mapping for a WebExConnect Cloud Connector Add a new attribute to the WebExConnect credential map Configure a SAML assertion for a WebExConnect Cloud Connector Apply an authorization policy to a WebExConnect Cloud Connector Configure the default policy action Configure policy rules and add them to the policy Policy conditions and their Boolean expressions Expression editor examples Review the WebExConnect Cloud Connector configuration...28 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 3

4 4 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

5 1.0 Introduction to McAfee Cloud Identity Manager McAfee Cloud Identity Manager (Cloud Identity Manager, formerly Intel Expressway Cloud Access 360-SSO) simplifies the management and secures the use of cloud, Software as a Service (SaaS), and web applications for companies and large organizations. Service and application providers can also use Cloud Identity Manager to simplify and improve the authentication process for their customers. Cloud Identity Manager provides support for the following features: Extensible framework Web single sign on (SSO) Multiple authentication methods Credential mapping and user provisioning Authorization policies and access control enforcement Event auditing and monitoring Connectors for popular cloud services and applications Web-based Management Console Cloud Identity Manager runs as a stand-alone server and is configured by an administrator using a webbased Management Console accessible from a web browser. For information about installing Cloud Identity Manager as a standalone server or as a cluster of servers, see McAfee Cloud Identity Manager Installation Guide. For information about configuring Cloud Identity Manager in the Management Console, see McAfee Cloud Identity Manager Product Guide. Cloud Identity Manager provides connectors for many popular cloud services and applications, including Google Apps and Salesforce.com. These connectors are built in to Cloud Identity Manager and simplify the deployment of the cloud service or application in an organization. Web SSO requires configuration in the Management Console and in the cloud application s user interface. Instructions for configuring SSO on the cloud application side are included in the documentation set. For customers who have Java-based or.net web applications that do not support SAML2 authentication, Cloud Identity Manager provides a custom connector. For information about integrating Java-based and.net web applications with Cloud Identity Manager, see McAfee Cloud Identity Manager Integration Guide. For software developers who want to write their own cloud service connectors or authentication modules, Cloud Identity Manager provides an SDK. For more information about the SDK, see McAfee Cloud Identity Manager Developer s Guide. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 5

6 1.1 Supported environments Cloud Identity Manager supports these environments. Version Architecture IA-32 Intel 64 Linux Operating System Red Hat Enterprise Linux Server and Advanced Platform 5.0 Windows Operating System Yes Yes Windows Server 2003 Standard Edition Yes Yes Windows Server 2003 DataCenter Edition Yes Yes Windows Server 2003 Enterprise Edition Yes Yes Windows Server 2008 Yes Yes 1.2 Supported browsers Cloud Identity Manager supports different browsers for the application portal and the Management Console Application portal For end users who seek access to SaaS and web applications through a portal using Cloud Identity Manager identity services, Cloud Identity Manager supports the following desktop and mobile web browsers. Note that Cloud Identity Manager services are running in the background and are not visible to the end user. Desktop browsers Google Chrome 16 Mozilla Firefox 9 Microsoft Internet Explorer 7, 8, and 9 Safari Mobile browsers Android 2.0 devices and WebKit browser ios devices and Safari browser Management Console The Cloud Identity Manager Management Console is a web-based user interface that provides administrators with a single, central point of management and control through a web browser on a local computer. For Management Console administrators, Cloud Identity Manager supports the following desktop and mobile web browsers. Desktop browsers Firefox 9 Internet Explorer 7, 8, and 9 Mobile browsers None are currently supported. 6 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

7 1.3 Available documentation The Cloud Identity Manager documentation set includes the following guides: McAfee Cloud Identity Manager Product Guide A complete guide to the Management Console and the configuration tasks needed to administer Cloud Identity Manager McAfee Cloud Identity Manager Developer s Guide Provides information for software developers who want to write custom Java code that extends Cloud Identity Manager functionality McAfee Cloud Identity Manager Installation Guide Includes the tasks and procedures that you need to install and remove Cloud Identity Manager as a standalone server on Microsoft Windows and Linux operating system platforms McAfee Cloud Identity Manager Integration Guide Provides instructions on how to integrate Javabased and.net web applications that do not support SAML2 authentication with Cloud Identity Manager Note: In addition to these guides, there are separate guides that document how to configure the different Cloud Connectors. For more information, see the McAfee Cloud Identity Manager Product Guide. 1.4 Technical support For technical assistance, contact McAfee support by one of the following options: Support portal: Phone number: McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 7

8 8 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

9 2.0 Configuring SSO for a WebEx Connect user Cisco WebEx Connect is an enterprise instant messaging solution offered as a SaaS application. The WebEx Connect solution includes client software that you download and install locally on your computer. To obtain the installer and an account, contact your WebEx Connect representative. For more information, see section 2.1 Install and enable the WebEx Connect client on Windows. The WebEx Connect application and Cloud Identity Manager Cloud Connector support Service Provider (SP)-initiated authentication. Integrating the WebEx Connect application and Cloud Identity Manager involves the following configuration tasks. For more information, see the corresponding sections: Configuring a WebExConnect Cloud Connector in the Management Console See section 3.0 Configuring a WebExConnect Cloud Connector. Certificate Management See section 2.2 Certificate management. Configuring SSO using the WebEx Connect Administration Tool See section 2.3 Configure SSO using the WebEx Connect Administration Tool. Note: The Management Console is the Cloud Identity Manager administrative interface. 2.1 Install and enable the WebEx Connect client on Windows After you install the WebEx Connect client on Windows, you specify the name of your organization to enable it. You also initialize the WebEx Connect server URL locally. 1. On Windows: Open a Command Prompt, and go to the directory where the installer is located. 2. To start the installer, enter the following command: Connect.exe. Note: The installation package and run-time executable are both named Connect.exe. 3. To enable the run-time executable, enter the following command: Connect.exe /sso_org <org_domain_name> Example: Connect.exe /sso_org Example.com 4. In the WebEx Connect client interface, go to File Change Connection Settings, and set Login Server to the following value: <hostname>.webexconnect.com. Note: Replace <hostname> with the name of the server on which WebEx Connect is running. This information is available from your WebEx Connect representative. 5. In the WebEx Connect installation directory, locate the apconfig.ini file, open the file, and modify the CasURL setting as follows: CasURL=<hostname>.webexconnect.com. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 9

10 2.2 Certificate management Cloud Identity Manager signs SAML assertions, requests, and responses using an X.509 certificate. WebEx Connect needs the X.509 certificate to verify the signatures. You export the Cloud Identity Manager certificate to a file in the Management Console and import the certificate file using the WebEx Connect Administration Tool. The certificate management tasks are: 1. Export an X.509 certificate in the Management Console See section Export a Cloud Identity Manager certificate for WebEx Connect. 2. Import the X.509 certificate using the WebEx Connect Administration Tool See section 2.3 Configure SSO using the WebEx Connect Administration Tool Export a Cloud Identity Manager certificate for WebEx Connect You export the X.509 certificate that Cloud Identity Manager uses to sign SAML assertions, requests, and responses, so that WebExConnect can use the certificate to verify the signatures. 1. Open the Management Console, and select Certificate Management from the Admin tab dropdown list. 2. In the Certificate Management window, click the Export icon corresponding to the X.509 certificate that you want to export. The Opening CRT file dialog box opens. 3. Click Save File. The X.509 certificate file is saved in your web browser s Downloads folder. 10 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

11 2.3 Configure SSO using the WebEx Connect Administration Tool Integrating a WebEx Connect application instance with Cloud Identity Manager requires configuration using the WebEx Connect Administration Tool as well as the Management Console. 1. To access the WebEx Connect Administration Tool, go to the URL provided by your WebEx Connect representative, and provide your logon credentials. 2. In the WebEx Connect Administration Tool: Click the Configuration tab. 3. Expand the System Settings area, and click Security Settings. 4. On the Security Settings page, click Federated Web SSO Configuration. 5. In the Federated Web SSO Configuration dialog box, provide values for the following settings, then click Save. Table 1. Setting Federated Web SSO Configuration settings Description Federation Protocol SSO Profile WebEx SAML Issuer (SP ID) Issuer for SAML (IdP ID) Select SAML 2.0 from the drop-down list. Select the SP Initiated option. Type the following value in this field: Specifies the URL of the SAML assertion issuer service provided by Cloud Identity Manager. Note: The SAML assertion issuer is the Identity Provider, Cloud Identity Manager. The URL is the value that you specify on the SAML Assertion step in the WebExConnect Cloud Connector wizard in the Management Console. Copy the SSO Service URL corresponding to the WebExConnect Cloud Connector in the Management Console, and paste it in this field in the WebEx Connect Administration Tool. To locate the SSO Service URL in the Management Console: Customer SSO Service Login URL 1. Open the Management Console. 2. Click the troubleshooting icon corresponding to the WebExConnect Cloud Connector. 3. Click the General Info tab. 4. In the Service Connection Endpoint Location area, look for the SSO Service URL. Note: WebEx Connect is the Service Provider. The Service Provider uses the SSO Service URL displayed in the Service Connection Endpoint Location area when initiating SSO. NameID Format AuthnContextClassRef Select Address from the drop-down list. Type the following value in this field: urn:oasis:names:tc:saml:2.0:ac:classes:passwordprotectedtransport 6. On the Security Settings page, click Organization Certificate Management. 7. In the Organization Certificate Management dialog box: a. Click Import New Certificate. b. Browse for and upload the Cloud Identity Manager certificate file. c. Click Save. 8. On the Security Settings page, click Save. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 11

12 12 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

13 3.0 Configuring a WebExConnect Cloud Connector A Cloud Connector is the configuration that allows Cloud Identity Manager to connect to and provide services for a cloud application. When a WebExConnect Cloud Connector is configured, Cloud Identity Manager can provide identity and SSO services for WebEx Connect users. You configure a WebExConnect Cloud Connector in the Cloud Connector wizard in the Management Console. Configuring a WebExConnect Cloud Connector in the wizard involves the following steps. For more information about each step, see the corresponding sections: 1. Cloud Application Type See section 3.1 Select the cloud application type. 2. Identity Connector See section 3.2 Specifying an Identity Connector. 3. SAML Credential Mapping See section 3.3 Configure SAML credential mapping for a WebExConnect Cloud Connector. 4. SAML Assertion See section 3.4 Configure a SAML assertion for a WebExConnect Cloud Connector. 5. Authorization Enforcement See section 3.5 Apply an authorization policy to a WebExConnect Cloud Connector. 6. Review See section 3.6 Review the WebExConnect Cloud Connector configuration. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 13

14 3.1 Select the cloud application type A Cloud Connector is the configuration that allows Cloud Identity Manager to connect to and provide services for a cloud application. For example, a WebExConnect Cloud Connector is the configuration that allows Cloud Identity Manager to connect to a WebExConnect application and to provide SSO, SLO, and other services. To select the WebExConnect cloud application type 1. Select the Cloud Connectors tab in the Management Console, and then click New Cloud Connector. The Cloud Connector wizard opens on the Cloud Application Type step. 2. Select the cloud application type: WebExConnect. Note: If the application is not one of the built-in types shown in the Cloud Application Type window, click More to open the More Applications window. This window shows all plug-in cloud application types in the Cloud Identity Manager system. 3. Type a name for the WebExConnect Cloud Connector in the Cloud Connector Name field. Note: The name can contain only letters, numbers, and the following characters:., _ and -. The name cannot contain spaces or exceed 64 characters in length and is not case-sensitive. Specify a meaningful name. For example, a name that identifies the Cloud Connector-Identity Connector combination is more useful than a URL, which can change. 4. Click Next. The Identity Connector step opens. 3.2 Specifying an Identity Connector To specify an Identity Connector, you select an existing Identity Connector or create a new one. There are six types of Identity Connectors: LDAP Integrated Windows Authentication with Active Directory (IWA-AD) ECA360 Token Authentication Authentication Chain SAML2 Proxy Central Authentication Service (CAS) For LDAP and IWA-AD Identity Connectors, identity information is retrieved from an identity store. To configure these Identity Connectors, you specify the ID of the identity store containing the identity information and how to search the specified identity store. To specify the search, you configure the following LDAP parameters: Base DN Specifies where to start searching in the LDAP tree Search Attribute Specifies the user attribute to retrieve from the identity store Search Scope Specifies how many levels to search in the LDAP tree below the Base DN For CAS and other Identity Connectors, identity information is retrieved from an authentication result provided by an external authentication service. To configure one of these Identity Connectors, you specify fields specific to each connector type. 14 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

15 3.2.1 Select an existing Identity Connector If the Identity Connector is already configured, you can select it on the Identity Connector step of the Cloud Connector wizard. The settings on this step depend on the Identity Connector you select. For example, the Enable Additional Authentication Module(s) area is only displayed when the following conditions are met: The selected Identity Connector type is an authentication chain. When the authentication chain was created, one or more authentication modules were configured as Determined by Cloud Connector on the Policy Setting step of the Authentication Module wizard. To enable these modules, select the checkboxes in the Enable Additional Authentication Module(s) area. For more information, see the McAfee Cloud Identity Manager Product Guide. To select an existing Identity Connector 1. Select an existing Identity Connector from the list in the window, or click New Identity Connector to create a new one and add it to the list. 2. (Optional) To test the connection to the Identity Connector, click Test. Note: The Test button is disabled for Identity Connectors of type authentication chain. 3. (Optional) Select a user-defined portal category from the Category drop-down list, click Manage Categories, or both. For more information, see the next section. 4. (Optional) In the Enable Additional Authentication Module(s) area, select the checkboxes corresponding to the authentication modules you want to enable. Note: This area is only displayed when one or more modules in an authentication chain are configured as Determined by Cloud Connector. Example: OTP () 5. Click Next. The Identity Connector configuration is saved. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 15

16 Manage User-defined Portal Categories On the Identity Connector step of the Cloud Connector wizard, you can assign a user-defined portal category to the Cloud Connector that you are configuring. User-defined portal categories allow you to group applications having the same category on the application portal associated with that Identity Connector. For example, all applications tagged with the Cash Management category are displayed together on the portal. Each Identity Connector has its own menu of categories. To manage user-defined portal categories 1. To manage user-defined portal categories, click Manage Categories on the Identity Connector step of the Cloud Connector wizard. The Manage Categories dialog box opens. To add a new category, click Add, provide values for the fields in the Add Category dialog box, and click Save. URL Specifies the portal URL that you can use to access the Cloud Identity Manager service and the category ID. This value is provided for you. Name Specifies the name of the new category. Description (Optional) Specifies a description of the new category. To edit an existing category, click Edit, modify the values in the fields in the Edit Category dialog box, and click Save. To remove an existing category, select it in the Manage Categories dialog box, and click Remove. 2. Click OK. The Manage Categories dialog box closes, and the categories are saved and added to the Categories drop-down list in the Identity Connector window. 16 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

17 3.2.2 Create a new Identity Connector To create a new Identity Connector, you specify a name and an Identity Connector type. Fields open that correspond to the type that you select. To configure an LDAP or IWA-AD Identity Connector, you create a new or use an existing identity store. To configure a CAS or other Identity Connector, you specify fields specific to that connector type. You begin this procedure on the Identity Connector step of the Cloud Connector wizard. To create a new Identity Connector 1. Click New Identity Connector. The New Identity Connector dialog box opens. 2. Type a name in the Identity Connector field. 3. Select one of the following types from the Identity Connector Type drop-down list: LDAP Integrated Windows Authentication with Active Directory (IWA-AD) ECA360 Token Authentication Authentication Chain SAML2 Proxy Central Authentication Service (CAS) The New Identity Connector dialog box expands to show the parameters required to configure the selected Identity Connector type. 4. Configure the parameters required for the specified Identity Connector type. For more information, see the McAfee Cloud Identity Manager Product Guide. 5. Click Save Identity Connector. The Identity Connector configuration is saved. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 17

18 3.3 Configure SAML credential mapping for a WebExConnect Cloud Connector On the SAML Credential Mapping step, you map identity information from Cloud Identity Manager to the target application. The Credential Mapping source is the user attribute name in the Cloud Identity Manager system. The target is the attribute name that you specified in the administrator s account of the cloud application. A SAML subject is the user whose identity is authenticated. The SAML subject type is the type of identity information. The SAML subject source is a value that corresponds to the specified subject type. For example, if the subject type is an authentication result, the subject source is an attribute value output by the Identity Connector. Note: For instructions on how to add a new or edit an existing target-source attribute mapping, see section Add a new attribute to the WebExConnect credential map. To configure SAML credential mapping for a WebExConnect Cloud Connector 1. Select one of the following options from the Subject Type drop-down list, and then specify the Subject Source: CONSTANT Select this subject type if the identity information has a constant value, and then type the constant value in the Subject Source field. AUTHN_RESULT_FIELD Select this subject type if the identity information is one of the user attributes output by the Identity Connector, and then select the user attribute from the Subject Source drop-down list. EXPRESSION Select this subject type if the identity information is the result of an expression, and then type the expression in the Subject Source field. 2. In the table on the Credential Mapping step, you have the following options: Add Click Add to open the New attribute dialog box, configure a new target-source attribute mapping, and add it to the table. Edit Select a row in the table, and click Edit to open the editor and modify an existing target-source attribute mapping. Remove Select a row in the table, and click Remove to remove the target-source attribute mapping from the table. 3. Click Next. The SAML Assertion step opens. 18 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

19 3.3.1 Add a new attribute to the WebExConnect credential map You add a new target-source pair to the credential or user account mapping table. To edit an existing target-source pair, you follow the same steps. To add a target-source pair to the credential or user account mapping table 1. Type the name of the attribute that WebExConnect is expecting in the Target name field. 2. Select one of the following options from the Source type drop-down list: CONSTANT Select this source type if the identity information has a constant value, and then type the constant value in the Constant value field. AUTHN_RESULT_FIELD Select this source type if the identity information is one of the user attributes output by the Identity Connector, and then select the user attribute from the Authentication result drop-down list EXPRESSION Select this source type if the identity information is the result of an expression, and then type the expression in the Expression value field. 3. (Optional) When the SAML2 attribute mapping requires additional attributes, select the More options for attribute checkbox. In the table that opens, add the additional attribute name-value pairs. 4. Click Ok. The New attribute dialog box closes, and the new target-source attribute pair is added to the table on the Credential Mapping step. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 19

20 3.4 Configure a SAML assertion for a WebExConnect Cloud Connector As the Identity Provider, Cloud Identity Manager signs and issues SAML assertions that attest to the user s identity. You specify the URL of the Cloud Identity Manager service that issues the SAML assertions and the key pair used by Cloud Identity Manager to sign the SAML assertions. WebEx Connect uses this information to verify requests and responses sent by Cloud Identity Manager. 1. Type the following value in the Cloud Issuer URL field: 2. Type the following value in the ACS URL field: Note: Replace <hostname> with the name of the server on which WebEx Connect is running. This information is available from your WebEx Connect representative. Replace <org_domain_name> with the domain name of your organization. Example: 3. Select a preconfigured key pair from the Signature Keys drop-down list. 4. Type the URL of the Cloud Identity Manager service that issues SAML assertions in the SAML Assertion Issuer field. Format: hostname Specifies the name of the server on which Cloud Identity Manager is installed. portnumber Specifies the port number of the server on which Cloud Identity Manager is installed. Default: Specify the following fields in the Conditions area: Clock Skew Specifies a value to use when calculating the SAML assertion s expiration time. This value is designed to offset small differences between clocks in different security domains. Default value: 20 Units: seconds Lifetime Specifies a lifetime value to use when calculating the SAML assertion s expiration time. When the expiration time is exceeded, the SAML assertion is invalidated by the assertion consumer. When specifying the lifetime value, take into account the estimated transmission latency between security domains. Default value: 60 Units: seconds 6. Click Next. The Authorization Enforcement step opens. 20 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

21 3.5 Apply an authorization policy to a WebExConnect Cloud Connector On the Authorization Enforcement step of the Cloud Connector wizard, you can build an authorization policy that determines which users can access your cloud application and under what conditions. To build the policy, you configure individual policy rules and add them to the overall policy. Each rule consists of an expression, which can be made up of sub expressions. Each rule has an action, as does the overall policy. The rule action is to permit or deny access to your cloud application when the rule evaluates to TRUE. The overall policy action the default action is to permit or deny access to your cloud application when none of the rules in the policy evaluates to TRUE. When the policy configuration area first opens, the default policy action is set to deny access Configure the default policy action Configure the overall policy action for when none of the rules in the policy evaluates to TRUE. 1. Select the Enable Authorization Policy checkbox. The policy configuration area opens. 2. To modify the overall policy action, click the Permit access to myapp or Deny access to myapp link that is shown, where myapp is the name of your cloud application, select an option in the Change Default Action dialog box, and click OK. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 21

22 3.5.2 Configure policy rules and add them to the policy Each policy rule has an action and consists of an expression, which can be made up of sub expressions. 1. Click Add Rule, select an option in the Rule Action dialog box, and click OK. The new rule is added above the Add Rule button and shown with the selected permit or deny action. 2. Configure the new rule by clicking the following options. For more information about configuring expressions, see section Policy conditions and their Boolean expressions. Table 2. Option Policy Rule Configuration Options Description (Permit Deny) access to myapp Delete Rule AND OR +! Move Down Move Up Toggles the rule s action from permit to deny and deny to permit. Note: myapp is the name you assign to the Cloud Connector. Deletes the rule. Toggles the Boolean operators that specify whether the relationship among the expressions in the group at the current level of the rule have an AND relationship or an OR relationship. Note: All expressions at one level in the rule have the same Boolean relationship. Opens the Add Expression dialog box where you can configure an expression and add it to the rule. Note: Clicking the + sign above a group of expressions adds the expression to the bottom of the group. Clicking the + sign to the right side of an individual expression creates a sub group that consists of the selected expression and the new expression. Alternately adds the NOT operator to and removes the NOT operator from the group of expressions at the current level in the rule. Moves the rule down one position in the rule list in the configuration area. Note: This option is only visible when more than one rule is added to the policy. Moves the rule up one position in the rule list in the configuration area. Note: This option is only visible when more than one rule is added to the policy. 3. Click Next. The Review step opens. 22 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

23 3.5.3 Policy conditions and their Boolean expressions When you configure an expression, you first select the expression type or condition. When the condition is met, the expression evaluates to TRUE. The conditions and their corresponding Boolean expressions are shown in the following table. Condition Access Time Day of Week Client IP Address Client Device Subject Attribute Match Advanced Expression Boolean Expression The time of access falls within the specified time range. The day of the week belongs to the specified set of days. The client IP address falls within the specified address range. The client device has one of the specified types. The user attribute value meets the specified match. The specified Boolean expression evaluates to TRUE Restrict access to the specified time range You can restrict when users are allowed to access your application to a specified time range. 1. Click + to open the Add Expression dialog box. 2. Select Access Time from the Expression Type drop-down list. 3. Select an operator from the Access Time drop-down list, and specify the required values: Between Select a starting and ending time for the time range from the From and To dropdown lists, respectively. Greater than Select a value from the Time drop-down list. Less than Select a value from the Time drop-down list. Greater than or equal to Select a value from the Time drop-down list. Less than or equal to Select a value from the Time drop-down list. 4. Click OK to close the dialog box and add the expression to the policy rule Restrict access to specified days of the week You can restrict when users are allowed to access your application to specified days of the week. 1. Click + to open the Add Expression dialog box. 2. Select Day of Week from the Expression Type drop-down list. 3. Select one or more of the checkboxes corresponding to the days of the week. 4. Click OK to close the dialog box and add the expression to the policy rule. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 23

24 Restrict access to the specified range of client IP addresses You can restrict access to your application to users having an IP address in the specified range. 1. Click + to open the Add Expression dialog box. 2. Select Client IP from the Expression Type drop-down list. 3. Select an operator from the IP Address drop-down list, and specify the required values: Between Select a starting and ending IP address for the address range from the From and To drop-down lists, respectively. Equals Type a valid IP address in the IP field. Greater than Type a valid IP address in the IP field. Less than Type a valid IP address in the IP field. Greater than or equal to Type a valid IP address in the IP field. Less than or equal to Type a valid IP address in the IP field. Masked IP address Type values for the base IP address and the bit mask in the Base IP and Mask fields, respectively. 4. Click OK to close the dialog box and add the expression to the policy rule Restrict access to specified client devices You can restrict access to your application to users on a personal computer or a mobile device. 1. Click + to open the Add Expression dialog box. 2. Select Client Device from the Expression Type drop-down list. 3. Select one or both of the following checkboxes: PC Allows users on a personal computer to access your application. Mobile Allows users on a mobile device to access your application. 4. Click OK to close the dialog box and add the expression to the policy rule Restrict access to subjects having the specified attribute value You can restrict access to your application to subjects or users having a specified attribute value. To do so, you specify the subject type and the subject source. The subject type is the type of identity information. The subject source is a value that corresponds to the specified subject type. For example, if the subject type is an authentication result, the subject source is an attribute output by the Identity Connector. 1. Click + to open the Add Expression dialog box. 2. Select Subject Attribute Match Expression from the Expression Type drop-down list. 3. Select an option from the Subject Type drop-down list: CONSTANT Type a constant value in the Subject Source field. AUTHN_RESULT_FIELD Select a user attribute from the Subject Source drop-down list. EXPRESSION Type an expression in the Subject Source field. 4. Select an option from the Operator drop-down list, and specify the required values: Equals The user attribute value must equal the value you specify in the Value field. Contains The user attribute value must contain the value you specify in the Value field. Starts with The user attribute value must start with the value you specify in the Value field. Ends with The user attribute value must end with the value you specify in the Value field. Matches (regular expression) The user attribute value must equal the result of the regular expression you specify in the Regex field. In list The user attribute value must belong to the list of specified values. 5. Click OK to close the dialog box and add the expression to the policy rule. 24 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

25 Restrict access based on the specified expression You can restrict access to your application based on whether the expression you specify evaluates to TRUE or FALSE. To build the expression, you select and combine components from the drop-down lists with text that you type in the expression editor. 1. Click + to open the Add Expression dialog box. 2. Select Advanced Expression from the Expression Type drop-down list. 3. Click Edit to open the Expression editor. 4. Select components from the following drop-down lists, and add them to the expression. Built-in Library Function Select the following built-in function: $AuthnResult.isIPInRange Tests whether the client computer s IP address falls within the specified range. Syntax: $AuthnResult.isIPInRange(low_IP,high_IP,target_IP) Parameters low_ip Specifies the beginning value of the IP address range. high_ip Specifies the ending value of the IP address range. target_ip Specifies the IP address of the client computer seeking access to the application. Return Value Returns one of the following values: TRUE The client IP address falls within the specified range. FALSE The client IP address does not fall within the specified range. Built-in Library Variable Select one of the following built-in variables: $IP Specifies the IP address of the client computer seeking access to the application. $UserAgent Specifies the web browser s user agent which provides information about whether the browser is running on a personal computer or mobile device. AuthnResult Select an attribute from the AuthnResult drop-down list. Example: mail Expression: $AuthnResult.getField("mail") Note: This attribute is an authentication result output by the Identity Connector or by the preceding authentication module in an authentication chain. Operator Select an operator from the Operator drop-down list. Example: contains Expression: $AuthnResult.getField("mail") contains Note: The available operators are: ==,!=, >, <, >=, <=, contains, &&,, or, ~=, +, -, *, %, /, and =. 5. Complete the expression by typing in the Expression editor field. Example: mcafee.com Expression: $AuthnResult.getField("mail") contains "mcafee.com" McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 25

26 6. Click OK to close the Expression editor. 7. Click OK to close the dialog box and add the expression to the policy rule Expression editor examples The following examples show how to build an expression using the expression editor. Expression editor: example 1 The expression in the following example retrieves the attribute corporation from the authentication results and compares its value to the empty string on the right side of the expression. If the expression evaluates to TRUE, the user is not part of any corporation. If the Rule Effect is set to Deny, the user is denied access to the SaaS or web application. To create this expression: 1. Select the attribute corporation from the AuthnResult drop-down list. 2. Select the operator == from the Operator drop-down list. 3. Type the double quotes in the Expression editor field. 4. Click OK. 26 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

27 Expression editor: example 2 The expression in the following example uses the built-in library function $AuthnResult.isIPInRange and the built-in library variables: $IP and $UserAgent. The expression evaluates to TRUE if one or more of these conditions are met: The client computer IP address falls within the specified range. The client computer IP address equals the specified value. The web browser is running on an iphone. If the expression evaluates to TRUE and the Rule Effect is set to Permit, the user is granted access to the SaaS or web application. To create this expression: 1. Select $AuthnResult.isIPInRange from the Built-in Library Function drop-down list. 2. Type the low and high IP addresses that specify the range inside the first two pairs of quotes inside the parentheses. 3. Replace the third pair of quotes with the Built-in Library Variable $IP, which is the IP address of the client computer seeking access to the application. 4. Select the operator from the Operator drop-down list. 5. Select $IP from the Built-in Library Variable drop-down list. 6. Select the operator == from the Operator drop-down list. 7. Type an IP address enclosed in quotes in the Expression editor field. 8. Select the operator from the Operator drop-down list. 9. Select $UserAgent from the Built-in Library Variable drop-down list. 10. Select the operator contains from the Operator drop-down list. 11. Type iphone (including the quotes) in the Expression editor field. 12. Click OK. McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide 27

28 3.6 Review the WebExConnect Cloud Connector configuration On the Review step of the Cloud Connector wizard, you can view the application type, application name, and the Identity Connector. You can also test the configuration with the SSO test URL that is provided. The alias is a short name that you can use in place of the longer SSO test URL. To accept and save the configuration, click Finish. 28 McAfee Cloud Identity Manager WebExConnect Cloud Connector Guide

29

30 [Revision A]