FIELDVUE Instrumentation

Size: px

Start display at page:

Download "FIELDVUE Instrumentation"

Zoe McDonald
6 years ago
Views:

Product Bulletin FIELDVUE Instrumentation Communicate with both HART and FOUNDATION Fieldbus FIELDVUE digital valve controllers Configure, calibrate, and diagnose FIELDVUE instruments from

for advanced troubleshooting Advanced Diagnostics provide insight into the dynamic performance of the valve/actuator assembly Perform diagnostics on single-acting and double-acting actuators

1 Product Bulletin FIELDVUE Instrumentation Communicate with both HART and FOUNDATION Fieldbus FIELDVUE digital valve controllers Configure, calibrate, and diagnose FIELDVUE instruments from one location Use the Performance Tuner to optimize tuning Performance Diagnostics provide in-service diagnostics for monitoring the health of the valve assembly and customized diagnostics for advanced troubleshooting Advanced Diagnostics provide insight into the dynamic performance of the valve/actuator assembly Perform diagnostics on single-acting and double-acting actuators Setup and test FIELDVUE instruments for SIS applications Schedule diagnostics to run on a regular basis using Scheduler Decrease repetitive actions by setting up batches D102227X012

2 Product Bulletin gives you the ability to work with HART and FOUNDATION fieldbus FIELDVUE instruments. AMS ValveLink Software provides an easy-to-use environment on a personal computer for configuring, calibrating, and diagnosing the operating characteristics of DVC6000, DVC2000, DVC5000, DVC6000f and DVC5000f Series digital valve controllers. Using AMS ValveLink Software, an instrument engineer, maintenance technician or operations supervisor can obtain the information needed to determine problems before they affect the process. AMS ValveLink Software helps to determine which control valves require maintenance during turnarounds. AMS ValveLink Software runs on a personal computer and presents FIELDVUE instrument information with easy-to-interpret, customizable displays. CUSTOMIZE PARAMETERS FOR MONITORING ON STATUS MONITOR VIEW CRITICAL PARAMETERS ON BAR GRAPH FOR INSTANT COMPARISON Customizable Status Monitor Displays Operational Parameters and Alerts AMS ValveLink Software is a core component of the proven PlantWeb digital plant architecture. AMS ValveLink Software powers PlantWeb through predictive and proactive control valve maintenance using intelligent digital valve controllers to improve availability and performance. 2

Product Bulletin Product Suite AMS ValveLink Software is available in a variety of configurations to allow you to realize the full benefit of the FIELDVUE digital valve controllers.

3 Product Bulletin Product Suite AMS ValveLink Software is available in a variety of configurations to allow you to realize the full benefit of the FIELDVUE digital valve controllers. Integrate AMS ValveLink Software into AMS Suite: Intelligent Device Manager AMS ValveLink SNAP-ON provides integration with AMS Suite: Intelligent Device Manager to perform configuration, calibration, and FIELDVUE diagnostics. Integration with AMS Suite: Intelligent Device Manager provides the ability to communicate with FIELDVUE digital valve controllers via DeltaV, Ovation, PROVOX, HART multiplexers, and HART modems. Integrate AMS ValveLink Software into DeltaV ValveLink SNAP-ON for DeltaV provides integration with DeltaV and permits users to perform FIELDVUE diagnostics on FOUNDATION Fieldbus FIELDVUE digital valve controllers connected to a DeltaV control system. Use AMS ValveLink Software Independently ValveLink Solo permits users to perform configuration, calibration, and FIELDVUE diagnostics on HART and FOUNDATION Fieldbus FIELDVUE digital valve controllers. Integrate AMS ValveLink Software into the Yokogawa Plant Resource Manager (PRM ) and Centum Control System. ValveLink PLUG-IN for PRM provides integration with the Yokogawa Plant Resource Manager (PRM). This integration provides PRM users with the ability to launch the ValveLink PLUG-IN for PRM directly from PRM and to communicate with FIELDVUE digital valve controllers through PRM and the Yokogawa Centum control system. 3

Product Bulletin Communicate with both HART and FOUNDATION fieldbus FIELDVUE Instruments with the same Software AMS ValveLink Software remotely communicates with HART FIELDVUE instruments (DVC2000,

4 Product Bulletin Communicate with both HART and FOUNDATION fieldbus FIELDVUE Instruments with the same Software AMS ValveLink Software remotely communicates with HART FIELDVUE instruments (DVC2000, DVC5000 and DVC6000 Series) over the existing 4-20 ma signal wiring using the HART communication standard. The same software also can remotely communicate with FOUNDATION fieldbus FIELDVUE instruments (DVC6000f and DVC5000f Series) over the fieldbus H1 segment. Information for all series of instruments is presented in a consistent, easy-to-interpret interface that provides: A device connection view of all connected instruments Monitoring of instrument operational parameters and alerts Review and comparison of diagnostic graphs Instrument setup and calibration Data import and export USE TOOLBAR, MENU SELECTION, OR CONTEXT MENU TO EASILY SELECT ACTIVITIES SUCH AS TRENDING, DIAGNOSTIC TESTS AND ALERTS INDICATES INSTRUMENT LEVEL HC AC AD PD SIS INDICATES NETWORK CONNECTION INDICATES VALVE TYPE INDICATES IN/OUT OF SERVICE In Service Out of Service Device connection view provides easy access to all network and database instruments 4

Product Bulletin Reduce Commissioning Time Save time by using the configuration and calibration capabilities of AMS ValveLink Software to perform these commissioning tasks online: Automatically

Setup Wizard asks basic questions about the valve and actuator to simplify and speed commissioning.

5 Product Bulletin Reduce Commissioning Time Save time by using the configuration and calibration capabilities of AMS ValveLink Software to perform these commissioning tasks online: Automatically calibrate travel. Verify dynamic response to input changes. Setup Wizard walks you step-by-step through instrument setup and calibration. Setup Wizard asks basic questions about the valve and actuator to simplify and speed commissioning. You can even customize the Setup Wizard so that: Instrument configurations are optimized for specific applications. Alert points, travel cutoffs, travel limits, and characterization are consistently applied. Manual entry is eliminated. The Setup Wizard makes setting up your valves fast and easy Automatically Optimize Valve Performance The Performance Tuner lets you easily adjust a FIELDVUE digital valve controller for optimum performance. When mounting a FIELDVUE digital valve controller, to either a Fisher or a non-fisher valve, the Performance Tuner can optimize valve performance for you. Realize the Full Potential of the FIELDVUE Digital Valve Controllers with and FIELDVUE Diagnostics Performance Diagnostics Predictive in-service diagnostics for monitoring the health of the valve assembly and customized diagnostics for advanced troubleshooting. The predictive in-service diagnostics may be used to help detect problems with air leakage, valve assembly friction and deadband, instrument air quality, loose connections, supply pressure restriction, and valve assembly calibration. When a problem is identified, the diagnostic provides a description and severity of the problem, a probable cause, and recommended action. In-service diagnostics for troubleshooting allow custom diagnostics to be set up to collect data at a high-frequency collection rate and present the data in a graphical format. When an issue is so complex that external expertise is required, the data may be exported from the custom diagnostic and sent to an expert for evaluation, thereby minimizing the need for an on-site visit. Performance Diagnostics tests are available upon user request or a pre-selected daily, weekly, or monthly schedule without user intervention. 5

Product Bulletin Provide Real-Time Notification of Current and Potential Valve and Instrument

Performance Diagnostics enables the use of diagnostics while the valve is in-service and operating.

Red/Yellow/Green condition indicator, including: I/P and Relay Integrity Supply Pressure Relay

Performance Diagnostics are available upon user request or may be scheduled to automatically run

6 Product Bulletin Provide Real-Time Notification of Current and Potential Valve and Instrument Problems. Performance Diagnostics enables the use of diagnostics while the valve is in-service and operating. Tests can be performed to identify problems with the entire control valve assembly, such as: Red/Yellow/Green condition indicator, including: I/P and Relay Integrity Supply Pressure Relay Adjustment Air Mass Flow Travel deviation 1-Button Sweep Friction and Deadband Trending Performance Diagnostics are available upon user request or may be scheduled to automatically run on a daily, weekly, or monthly basis. Performance Diagnostics provide on-line / in-service predictive diagnostics to identify faults and list possible causes and recommended corrective actions for each fault. 6

Product Bulletin Advanced Diagnostics FIELDVUE Advanced Diagnostics vary the digital valve controller set point and plot valve operation to provide insight into the dynamic performance of the

Advanced Diagnostics include out-of-service diagnostics such as valve signature, dynamic error band, and step response that will assist in the identification of emerging valve problems quickly and

Calculate actuator spring rate and bench set. Identify potential packing problems. Compare current condition to previous baseline condition.

7 Product Bulletin Advanced Diagnostics FIELDVUE Advanced Diagnostics vary the digital valve controller set point and plot valve operation to provide insight into the dynamic performance of the valve/actuator assembly. Advanced Diagnostics include out-of-service diagnostics such as valve signature, dynamic error band, and step response that will assist in the identification of emerging valve problems quickly and accurately. ZOOM IN TO EXAMINE VALVE MOVEMENT AND OTHER DETAILS The Valve Signature Diagnostic is used to: Evaluate valve friction, deadband, and shutoff capability. Calculate actuator spring rate and bench set. Identify potential packing problems. Compare current condition to previous baseline condition. The Dynamic Error Band diagnostic is used to analyze hysteresis, deadband, and dynamic error. Diagnostic tests help you detect emerging valve repair requirements before they impact performance. This enables you to set up a schedule to do predictive maintenance rather than preventive maintenance The Step Response diagnostic allows you to evaluate how well the valve tracks an input change. By minimizing dead time, deadband, and overshoot, process control is greatly enhanced. With the Step Response test you can: Validate tuning parameters. Obtain a numerical analysis for overshoot, hysteresis, dead time, t63, and t86. Define up to 11 steps. A Performance step test provides a predefined sequence of 29 steps. This test allows the user to quickly evaluate valve and actuator response to signal change and determine maximum deadband. Use the step response test to verify instrument tuning and valve response to signal changes 7

Product Bulletin Setup and Test FIELDVUE Instruments for SIS Applications Use AMS ValveLink Software to setup and test the final control element in safety instrumented system applications.

8 Product Bulletin Setup and Test FIELDVUE Instruments for SIS Applications Use AMS ValveLink Software to setup and test the final control element in safety instrumented system applications. AMS ValveLink Software for SIS tiered digital valve controllers provides: A Setup Wizard that sets up the digital valve controller for use in a Safety Instrumented System. The capability to initiate a partial stroke test of the final control element without requiring a process shutdown. Without disturbing the process, you can run a partial stroke test to prove the valve will respond on demand. Store partial stroke test results for future comparison and study. Documentation for statutory authorities. Every event performed with AMS ValveLink Software is logged with a time and date stamp to document that tests were run and how the valve assembly responded. At the same time the instrument performs the partial stroke test, AMS ValveLink Software also gathers diagnostic data. Use this data to evaluate valve performance and determine if maintenance is required. Diagnostic information to allow predictive maintenance of the final control element. No need to unnecessarily shutdown the process to perform maintenance on the safety shutdown valve. Event Messenger capability to send notification via , pager, or cell phone if a specific alert, or set of alerts, occurs on a predefined set of safety shutdown valves. Schedule Performance Diagnostics and SIS Partial Stroke Diagnostics With Scheduler, you can schedule Performance Diagnostics and SIS Partial Stroke diagnostics to run on a recurring daily, weekly, or monthly schedule that you specify. A summary of the outcome of scheduled tasks is available from within Scheduler and for complete details you may view the resulting diagnostic graphs and analyses. If you are using the AMS ValveLink SNAP-ON, any resulting alerts will be visible from within the AMS Suite: Intelligent Device Manager Audit Log, the AMS Suite: Intelligent Device Manager Alert Monitor, and the AMS Suite: Asset Portal. 8

Product Bulletin Automate Repetitive Actions by Setting up Batches Use Batch Runner to automate diagnostic tests and other repetitive activities With Batch Runner, you can setup AMS ValveLink

9 Product Bulletin Automate Repetitive Actions by Setting up Batches Use Batch Runner to automate diagnostic tests and other repetitive activities With Batch Runner, you can setup AMS ValveLink Software to automatically run diagnostics tests, calibrate, or upload configuration data to multiple valves with a user specified routine. During a turnaround or production change, you can upload configurations, run the Performance Tuner to optimize tuning, or even reset the instrument clock without any interaction by personnel. Batch Runner reduces redundancy and increases consistency by allowing the user to setup a batch once, and repeatedly run that set of actions on different groups of valve assemblies. Use Signature Series Tests to Benchmark Valve Performance Current diagnostic tests can be overlaid with Signature Series tests performed by the factory when the valve was manufactured. ValveLink Signature Series tests are performed on Fisher control valves equipped with the FIELDVUE digital valve controller when specified as part of the original valve order. To order Signature Series testing, simply specify your Signature Series testing requirements on all Fisher control valve orders. By importing Signature Series data into AMS ValveLink Software, you can compare the as-shipped performance with the valve s current operating condition. Reports Reports may be generated that contain many different elements, including the Performance Diagnostics and Advanced Diagnostics. These reports can be generated from various locations in AMS ValveLink Software. Quick Report Current Dataset Report Custom Report Batch Report (available in Batch Runner) Note Neither Emerson, Emerson Process Management, Fisher, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user. 9

10 Product Bulletin Table 1. Capability (also see table 2) Product Type Capability AMS ValveLink SNAP-ON ValveLink SNAP-ON for DeltaV ValveLink PLUG-IN for PRM HART Modem HART Multiplexer Foundation Fieldbus H1 PC Card Foundation Fieldbus Ovation H1 Foundation Fieldbus DeltaV H1 Foundation Fieldbus PRM/Centum H1 Valve Signature Dynamic Error Band Drive Signal Test Step Response Advanced Step Response Analysis and Overlay Diagnostics Performance Step Test Status Monitor Stroke Valve ESD Partial Stroke I/P & Relay Integrity Diagnostic Travel Deviation Diagnostic Supply Pressure Diagnostic Relay Adjustment Diagnostic AW7070VL00025 AW7070VL00100 VL2021DVf (5) VL2021H (2) (2) (2) (2) (4) (4) (4) (4) Air Mass Flow Diagnostic Performance Diagnostics (4) (4) One-Button Diagnostic Network Scan Trending Valve Friction/Deadband Estimation Valve Friction/Deadband Trending Profiler Event Messenger Modbus Batch Runner Scheduler DataSync Triggered Profile (4) (4) (4) (4) (4) (4) (3,4) (3,4) Firmware Download Temporary Tiering SIS Support Instrument Level StepUp (1) Initial Tag Limit Unlimited Unlimited Max Tag Limit (2) (2) Unlimited Unlimited Indicates capability available 1. HART only 2. AMS based capability. AMS ValveLink SNAP-ON does not control or limit this functionality. 3. DVC6000 only. 4. Performance Diagnostics are available for the DVC5000 and DVC6000 instruments through the AMS multiplexer interface. Performance Diagnostics are available for DVC6000 instruments through the System Interface to PROVOX or DeltaV but not for DVC5000 instruments. Performance Diagnostics are available for the DVC5000 and DVC6000 instruments through the System Interface to a Westinghouse Ovation system. 5. Foundation Fieldbus Only. 10

11 Product Bulletin Table 2. Capability (also see table 1) Capability Product Type ValveLink Solo HART Modem HART Multiplexer Foundation Fieldbus H1 PC Card Foundation Fieldbus Ovation H1 Foundation Fieldbus DeltaV H1 Foundation Fieldbus PRM/Centum H1 Valve Signature Advanced Diagnostics Performance Diagnostics Network Scan Trending Event Messenger Modbus Batch Runner Scheduler DataSync Firmware Download Temporary Tiering SIS Support Dynamic Error Band Drive Signal Test Step Response Step Response Analysis and Overlay Performance Step Test Status Monitor Stroke Valve ESD Partial Stroke I/P & Relay Integrity Diagnostic Travel Deviation Diagnostic Supply Pressure Diagnostic Relay Adjustment Diagnostic Air Mass Flow Diagnostic One-Button Diagnostic Valve Friction/Deadband Estimation Valve Friction/Deadband Trending Profiler Instrument Level StepUp Triggered Profile VL2001 VL2005 VL2010 (4) VL2021 VL2031 (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (2) (2,3) (2) (2) (2) Initial Tag Limit Unlimited or 125 Max Tag Limit Unlimited Indicates capability available 1. HART only 2. DVC6000 only. 3. Database only. 4. In-Service only. 11

12 Product Bulletin Specifications (1) Available Configurations See tables 1 and 2 Recommended Minimum Hardware Requirements 400 MHz Pentium processor 256 Megabytes RAM (random access memory) Hard disk: No Trending 40 Megabytes of free space (2) Trending 100 Megabytes of free space Video: 600X800, 256 color VGA CD-ROM drive 4X or higher Ports: HART Modem Standard RS232, requires a dedicated interrupt HART Multiplexer Standard RS232 Modbus Standard RS232 Fieldbus H1 (NI) ISA, PCMCIA, or PCI I/O Connection Hardlock Parallel Port Supported Operating Systems ValveLink Solo Windows NT, Windows 2000, Windows XP, and Windows Server Specifications do not apply to Type VL2021DVf or ValveLink SNAP-ON application for AMS. 2. For extensive use of trending, 100 Megabytes of free space is recommended. 3. AMS ValveLink Software is no longer supported on Windows 95 or Windows 98, and is not supported on Windows ME. AMS ValveLink SNAP-ON Operating Systems supported by AMS Suite: Intelligent Device Manager v6.0 and newer. ValveLink SNAP-ON for DeltaV Windows NT, Windows XP, and Windows 2003 Server ValveLink Plug-In for PRM Operating Systems supported by Yokogawa Plant Resource Manager (PRM) v and newer Windows 2000 SP3 and Windows XP Modbus Interface Modbus Protocol: RTU or ASCII Function codes 1, 2, 3, 4, and 8 (subfunction 0) Slave address 1 to 255 (user selectable) Communication Rate: 300 to 19.2 kbaud Data Types: Function codes 1 & 2 Alert Status Function Codes 3 & 4 Analog Values IEEE double precision floating point Signed integer Scaled integer Electrical Connection to Control System: RS-232 or RS-485 FIELDVUE, SNAP-ON, ValveLink, PlantWeb and Fisher are marks owned by Fisher Controls International LLC, a member of the Emerson Process Management business division of Emerson Electric Co. AMS Suite, DeltaV, Ovation and PROVOX are marks owned by one of the companies in the Emerson Process Management business division of Emerson Electric Co. Emerson and the Emerson logo are trademarks and service marks of Emerson Electric Co. HART is a mark owned by the HART Communications Foundation. FOUNDATION is a mark owned by the Fieldbus Foundation. All other marks are the property of their respective owners. The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. We reserve the right to modify or improve the designs or specifications of such products at any time without notice. Neither Emerson, Emerson Process Management, Fisher, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use and maintenance of any product remains with the purchaser and end-user. Emerson Process Management Fisher Marshalltown, Iowa USA Cernay France Sao Paulo Brazil Singapore Fisher 12 Controls International LLC 1995, 2005; All Rights Reserved Printed in USA

Installing ValveLink Software. ValveLink Solo ValveLink SNAP ON ValveLink DTM ValveLink PLUG IN for PRM. Installation Guide D102800X012

Installing ValveLink Software. ValveLink Solo ValveLink SNAP ON ValveLink DTM ValveLink PLUG IN for PRM. Installation Guide D102800X012 Installation Guide ValveLink Software Installing ValveLink Solo ValveLink SNAP ON ValveLink DTM ValveLink PLUG IN for PRM www.fisher.com This page intentionally left blank. Installation Guide Table of