26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.

Transcription

1 66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual override with and without detent Simple design of soft seal spool system Maintenance-free Easily interchangeable solenoid Valves and solenoids are ATEX approved (see solenoids on page ) Technical data Medium: Compressed air, filtered *), lubricated or non-lubricated Operation: Solenoid, indirectly controlled Port size: G /4 and G / Operation pressure: max. bar (see specifications) Flow direction: Fixed Mounting position: Optional, preferably with solenoid on top Operating temperature: -* to +6 C *Please contact our technical service for use below + C. Materials: Housing: aluminium anodized Pilot flange: plastic (POM) Seals: NBR (Perbunan) Ordering information See page For connector plugs see page and data sheets N/en 7.7. / 5/ *) Oil recommendation: Shell Hydrol DO, ESSO Febis K (as of 7/9) or comparable oils with DVI values < 8 (DIN 55) and ISO viscosity class to 46 (DIN 559) 5/8 Our policy is one of continued research and development. We therefore reserve the right to amend, N/en

2 66, 87 Inline / way function Symbol Model Port size Operation pressure (bar) min. max. Flow l/min Switching time (ms) Manual override with/without detent Weight without solenoid (kg) Drawings No G /4 5, G /4 5 without, G /,5 5 without, G /4 5 with, G /,5 5 with,7 5/ way function Symbol 4 4 Model Port size Operation pressure (bar) min. max. Flow l/min Switching time (ms) Manual override with/without detent Weight without solenoid (kg) 6666 G /4 5,55 Drawings no G /4 5 without, G /4 5 with, G / 4 with, G /4 with, G / 5 with, 5 Ordering example / directional control valve, Port size G /4, solenoid in protection class IP65, 4 V DC, Quote: Accessories Silencer Cable gland protection class EEx e, EEx d (ATEX), Ms nickel plated brass Connector 47 (G/) *) EEx e (for solenoid 4xx / 46xx M x,5) 46 (G/4) *) EEx d (with rectifier) (for solenoid 46xx M x,5) EEx d, EEx e (for solenoid 46xx /-4 NPT) *) For indoors use Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under Technical Data. Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. N/en Our policy is one of continued research and development. We therefore reserve the right to amend, 5/8

3 66, 87 Inline Solenoid operators group B Model Power consumption Current Protection class Temperature Electrical connection Weight Dimensions Circuit 4 V DC V AC 4 V DC V AC Ambient/ Form (kg) diagram (W) (VA) (ma) (ma) Fluid C No. No. 4,7 - - IP 65 (with plug)*5) DIN EN 75-8,5 5 Fluid: max. 8 Form A *6) 45-4, - - IP 65 (with plug)*5) DIN EN 75-8,5 5 Fluid: max. 8 Form A *6) 5,7 - - EEx na II T DIN EN 75-8,6 5 IP 65 T C Form A with special screw 98, EEx m II T4 *) Cable m lang,4 9 4 IP 66 T C 99 -,5-5 EEx m II T4 *) Cable m lang,4 9 7 IP 66 T C 4 *8),9-6 - EEx me II T4 *) (T6) M x,5 *6),5 4 IP 66 T C (T4) 4 *8) - 5, - EEx me II T6/T4 *) (T6) M x,5 *6),5 7 IP 66 T C (T4) 46 *8),9-6 - EEx md IIC T6/T4 *) (T6) /-4 NPT *6),8 4 EEx me II T6/T4 *) (T4) IP 66 T C 46 *8) - 5, - EEx md IIC T6/T4 *) (T6) /-4 NPT *6),8 7 EEx me II T6/T4 *) (T4) IP 66 T C 46 *8),9-6 - EEx md IIC T6/T4 *) (T6) M x,5 *6),8 7 EEx me II T6/T4 *) (T4) IP 66 T C 46 *8) - 5, - EEx md IIC T6/T4 *) (T6) M x,5 *6),8 7 EEx me II T6/T4 *) (T4) IP 66 T C 7-5, - NEMA 4,4X *4) Flying leeds 45 mm long,5 6,6P, 7,9 TC (6 C) 7-5, - NEMA 4,4X *4) Flying leeds 45 mm long,5 5 6,6P, 7,9 TC (6 C) Standardvoltages 4 V DC, V AC. Other voltages on request. Design acc. to VDE 58, EN 54/58. % duty cycle. *) Categorie II GD, EC-Type-Examination-Certificate KEMA ATEX 47X *) Categorie II GD, EC-Type-Examination-Certificate KEMA 98 ATEX 445 X *) Categorie II GD, EC-Type-Examination-Certificate PTB ATEX 85 X *4) CSA-LR , FM approved, for hazardous locations: Div. and, Class I, II, III *5) Required connector for DC: type Valves can be operated with DC only for V AC application please use V DC coil together with rectifier plug: type 65 *6) Cable gland is not indicated in delivery *7) IP65 according to DIN 45/IEC 59 and DIN EN *8) This solenoid has a fuse with an appropirate rating. 5/8 Our policy is one of continued research and development. We therefore reserve the right to amend, N/en

4 66, 87 Inline Dimensions ➀ ~ 54 B U E A L P R A H P M K W X F S Model A B C E F H K L M P S T U W X 8766 G/4 7 4,5 55 7,5 4,5 5,5 8, G/4 7 4,5 55 7,5 4,5 5,5 8, G/4 7 4,5 55 7,5 4,5 5,5 8, G/ ,5 65, , G/ ,5 65, ,5 46 ➁ S B P 4 4 A R? 4 55 G/4 5 Manual override without detent Manual override with detent Solenoid 4 x 9 turnable N/en Our policy is one of continued research and development. We therefore reserve the right to amend, 5/8

5 66, 87 Inline ➂ S 76 7 G/ P R B A 46, 6, ➃ G/ Manual override with detent Solenoid 4 x 9 turnable 5/8 Our policy is one of continued research and development. We therefore reserve the right to amend, N/en

6 66, 87 Inline ➄ 5 8 5,5 7 7 G/ 4 6 4, 4, Manual override with detent Solenoid 4 x 9 turnable N/en Our policy is one of continued research and development. We therefore reserve the right to amend, 5/8

7 66, 87 Inline Dimensions for solenoid operators ➆ 5,5 49 ➇ 6,5 59 ➈ ➉ ,5 4,5 8,5 9, M x,5 4 9,5 6,5 54,5 7 7,5 / - 4 NPT 4,5 4, , , Pg 7,5 6 4,5 Pg 4 4 7, Connector can be indexed by 4 x 9 Ø (with spacer tube) M x,5 or / - 4 NPT 4 Flying leeds 8 (45 mm long) 5/8 Our policy is one of continued research and development. We therefore reserve the right to amend, N/en

8 66, 87 Inline Circuit diagrams ➀ ➃ ➄ ➅ ➆ N/en Our policy is one of continued research and development. We therefore reserve the right to amend, 5/8