3/2 DIRECT ACTING SOLENOID VALVE
|
|
|
- Gyles Phillips
- 5 years ago
- Views:
Transcription
1 / R N SONO VV YP PRUR UN - bar - bar YP PRUR NO - bar - bar YP PRUR N - bar - bar URS ubble tight shut off Mounts in any position Suitable for vacuum up to - torr Vibration resistance up to 9g Suitable for high speed cycling Speed up to cycles/ min ife > million cycles Manual override optionally provided W PRS ody nodized luminium rass nternals luminium rass ode uide ssembly Shadow-Ring opper/ Silver/ None Plunger, nsert Spring Seat, Seals NR, Viton, PM MN N U MPRUR - to 5 SPRS SP VRSON N SUX (Refer page for ordering code) SPR O Suffix : (Valve) OX, M Special version : (oil) O, R,,,, M Seal it : Oring Set and Plunger ssembly 9 M Repair it : Oring Set, Plunger ssembly, Springs, Manual Override, uide ssembly 99 ir, nert ases Solenoid it : Solenoid, asket and Nut PPON NO and and iverting YP X, P O MS x ia P XUS x d or 5 or P OU N U P N UNON POR ONNON pproval PPROV Single acting actuator/ ylinder/ control valve actuation iverting/ mixing of fluid Mixing * ontact Rotex for ny other ambient, fluid temperature, media and application U listed, U isted general purpose Valve Media like Water, ight Oil etc. R
2 / R N SONO VV ONSRUON RRN NUMR ON MON POWR V NRUS OXYN SONO SZ XPOSON PROO, P R NOSUR SQ. PU N, P RMN OX P YN SONO NOSUR WR XPOSON SUX PROO PROO PU N, P MOMNRY N P PM YR NR SYPU UM MOMNRY MNU OVRR SS Viton / (S. POR NP) UMNUM + R (S. POR NP) PO PRUR OY MR N NRNS UMNUM VV YP OR (mm) MXMUM NP() MNMUM SZ SP() PRPOR UR ONNON bar OW OR kv (PM O bar ΔP) SPON R, R, R, R,,,, /, / / NORMY OS S S S S S S M M5 S S S M M able ntry M x.5 M x.5 / NP 9 x d x ia x emb 9 MS MS 5MS 5MS 5 5 NS NS 5NS 5NS = o not specify when opted for. Refer Page # for Value of ode onstruction Reference, = Options available, 5,,
3 / R N SONO VV ONSRUON RRN NUMR ON MON POWR V NRUS OXYN XPOSON PROO, P R NOSUR SONO SZ SQ. PU N, P RMN OX P YN SONO NOSUR WR XPOSON SUX PROO PROO PU N, P MOMNRY N P YR PM NR SYPU UM MOMNRY MNU OVRR SS Viton / (S. POR NP) UMNUM + R (S. POR NP) PO PRUR OY MR N NRNS UMNUM VV YP OR (mm) MNMUM MXMUM NP() SZ SP() PRPOR UR ONNON bar OW OR kv (PM O bar ΔP) SPON R / R / R / R / / / / / / / / / / / NORMY OPN S S S S S S M M5 M M able ntry M x.5 M x.5 / NP 9 x d x ia x emb 9 MS MS 5MS 5MS 5 5 NS NS 5NS 5NS = o not specify when opted for. Refer Page # for Value of ode onstruction Reference = Options available 9,,, 5, 9
4 / R N SONO VV ONSRUON RRN NUMR ON MON POWR V NRUS OXYN SONO SZ XPOSON PROO, P R NOSUR SQ. PU N, P RMN OX P YN MOMNRY N SYPU UM MOMNRY M5 P PM YR NR S S S S S S S M SONO NOSUR WR XPOSON SUX PROO PROO PU N, P MNU OVRR SS Viton / (S. POR NP) UMNUM + R (S. POR NP) PO PRUR OY MR N NRNS UMNUM VV YP OR (mm) MXMUM NP() MNMUM SZ SP() PRPOR UR ONNON bar OW OR kv (PM O bar ΔP) SPON R / R / R / R / / / / / / / / / / / UNVRS able ntry M x.5 M x.5 / NP 9 x d 9 MS NS x emb 5MS 5MS 5 5 5NS 5NS = o not specify when opted for. Refer Page # for Value of ode onstruction Reference = Options available 9,,, 5, ORRN O N XMP VV + SONO YP SUX OR SZ POR ONNON VO URRN OY N NRNS SONO NOSUR MNU OVRR PPROV NSUON e.g. -.-+V - ; -.-R--+V -- S + SP VRSON
5 / R N SONO VV MNSONS ll imensions are in mm PU N SONO YP (POR SZ) OY ONS. M. R. VV YP : 9, R /, /.5.5, R Ø.5 /, / 5 Ø MNU OVRR OPONY PROV RMN OX/ x d NOSUR, YP, 9,, 9, 5, 5 / NP M x.5 9 5, R /, / 5.5.5, R Ø 5.5 /, / 5 Ø 5 / NP M x.5 N OY ONS. M. R. P VV YP : MNU OVRR OPONY PROV P (POR SZ) MNU OVRR OPONY PROV SQUR PU N SONO YP MNU OVRR OPONY PROV RMN OX/ x d R NOSUR, YP, 9,, 9, 5, 5, P 9 9 Ø5 5, R /, / Ø5 5, R Ø 9.5 Ø5 5 /, / 5 Ø 9 Ø5 5 P OY ONS. M. R. (POR SZ) VV YP : VV YP : Ø5 5, R 5 /, / 5 5 Ø5 5, R Ø.5 Ø5 5 /, ½ 5 Ø Ø5 5
6 / R N SONO VV MNSONS ll imensions are in mm PU N SONO YP 9, R 9 /, /.5.5, R Ø.5 /, / 5 Ø (POR SZ) OY ONS. M. R. VV YP :, MNU OVRR OPONY PROV RMN OX/ x d NOSUR, YP, 9,, 9, 5, 5 (POR SZ) / NP M x.5 OY ONS. M. R. VV YP :, 5, R 9 /, / 5.5.5, R Ø 5.5 /, / 5 Ø 5 MNU OVRR OPONY PROV / NP M x.5 N P P MNU OVRR OPONY PROV MNU OVRR OPONY PROV RMN OX/ x d R NOSUR, YP, 9,, 9, 5, 5, SQUR PU N SONO YP P 9 9 Ø5 5, R 9 /, / Ø5 5, R Ø 9.5 Ø5 5 /, / 5 Ø 9 Ø5 5 P OY ONS. M. R. (POR SZ) VV YP :, VV YP :, 5 5 Ø5 5, R /, / 5 5 Ø5 5, R 5 5 Ø5 5 5 /, / 5 5 Ø5 5
7 / R N, NORMY OS SONO VV SONO/ x d YP (POR SZ) OY ONS. M. R. VV YP :.5, R /, /.5.5, R Ø 5.5 /, / 5 Ø SONO/ x d YP
G 1/2 30,5 A Brass NBR 0,8 3,
4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down.33 0-2 mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see
Pilot kick type 2 port solenoid valve : Normally closed,normally open GENERAL PURPOSE VALVE ADK11 ADK12 SERIES
K11 K1 Series Pilot kick type port solenoid valve : Normally closed,normally open NRL PURPS VLV K11 K1 SRIS iaphragm structure Port size : Rc1/, Rc3/, R1/, R3/, R1 JIS symbol K11(normally closed) UT K1(normally
RT2Y Compact temperature switch intrinsic safety
ompact temperature switch intrinsic safety Main Features Excellent repeatability Fix dead band for control and alarm Resistant to accidental overtemperature Intrinsic safety Hazardous area 0, 1, 2 pplications
Distinctive Characteristics
istinctive haracteristics Low profile body of MRF model accommodates space limitations required for P mounting. For the MR and MRK bushing mount models, the range of behind panel body depths is. to. (.mm
/2 way indirect solenoid operated valves G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 / way indirect solenoid operated valves G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to SIL (IE 6508) dd-on manual
SMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
HARSH-ENVIRONMENT ARINC 801 Connectors and Termini
S-VIO I 801 onnectors and ermini O I-S I-O I-OI WOI OO 2014 SIS 180-159 ltra-ow d oss I 801 iber Optics with removable alignment sleeve for easy cleaning, maintenance and inspection he I 801 (Series 180-159)
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
98025 NAMUR 3/2 poppet valves electromagnetic actuated, indirectly controlled G 1/2, 1/2 NPT or flanged with NAMUR Interface
9805 NMUR / poppet valves electromagnetic actuated, indirectly controlled G /, / NPT or flanged with NMUR Interface Main application: single operated actuators for plants Valves for safety systems up to
26230, Inline 3/2, 5/2 and 5/3 way soft seal spool valves electromagnetic actuated, indirectly controlled G 1/4, G 1/2
/, / and / way soft seal spool valves electromagnetic actuated, indirectly controlled /, / traight-through flow, high v-factor tandard manual override ompact design asily interchangeable solenoid system
Series EVS7-6/7-8/7-10
onforming to ISO Standard Solenoid Valve (with M onnector) Series EVS7-6/7-8/7-0 (Size ) (Size ) (Size ) VK VZ VF VFR V VZS VFS VS VQ7 Large capacity Flow rate EVS7-6 (Size ) 00 l/min (NR) EVS7-8 (Size
Sealing boots. Prevent dust, sand and water from getting into switches. On toggle versions, also prevent ice from blocking lever action
Prevent dust, sand and water from getting into switches. On toggle versions, also prevent ice from blocking lever action Compatible with frontal sealing options (K and X408). Available in a wide range
ISO STAR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #1... ISO #3
ISO STR Solenoid & pilot actuated spool valves Sub-base 5/2 & 5/3, ISO #... ISO #3 Specially coated glandless spool and sleeve for long life vailable with integral flow regulators on ISO # & #2 sizes ow
C200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
3/2 5/2 SERIES 362/562
Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance
Dual rod cylinder with guide function for pick & place applications.
ual Rod ylinder Series XS ø, ø, ø, ø, ø, ø32 ual rod cylinder with guide function for pick & place applications. Series XS Twice the thrust on-rotating accuracy ±. X TS Y Y G X - - ata all bushing bearings
Push Button Switches. 186 Switches. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
Item 305D 3-Piece Ball Valve
ZIPSON'S 0, -piece high performance ball valve with ISO direct mounting pad is designed for the high pressure industrial pipe line in full port product. To compare the economic valve in the market, Zipson
SPH/BA Motorsports. Clean-break couplings for high pressure circuits
SPH/BA Motorsports Clean-break couplings for high pressure circuits Choose SPH/BA couplings... Applications - shock absorbers, brake and hydraulic lines - lubrication and coolants Combine lightweight and
Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
Preparation Units for Compressed Air. Modular construction Compact design Simple mounting Corrosion-resistant casings 1032 AL
L Preparation Units for ompressed ir Modular construction ompact design Simple mounting orrosion-resistant casings Maintenance devices for compressed air are put together according to need from the individual
TECHNICAL DATA EA 90. FAN HOUSING The fan housing is moulded from high strength structural polymer, incorporating resilient mounts for the shaft.
N 90 N and RSRVOR he cabinet and water reservoir are constructed from injection moulded high strength structural polymer, incorporating UV inhibitor additives. ll cabinet and reservoir mouldings are slate
Standard oil drain plug
PRODUCTS STANDARD OIL DRAIN PLUG STANDARD DRAIN SB Standard oil drain plug The Standard Drain is the original Femco oil drain plug, and was introduced in 1983 to change oil in a quick, clean and environmentally
97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
Technical Characteristics ENVIRONMENTAL
S Series Railway lat loating onnectors Railway flat floating connector odularity mixed power, signal & coaxial contacts. Up to 70 signal contacts. uiding pins. Rack/Panel applications (norm XP6-00) One
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
Metal Backshell. Materials and Finishes Material: Brass Finish: 50 in. Gold over Copper
Subminiature Space/High Reliability Metal ackshell Metal ackshells provide strain relief. Various profiles available for different cable routing requirements. Product eatures Qualified to MIL-Spec M85049
Operating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide
Stainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
Contact resistance : environmental class hermetic class
8525 eries pplications or all general purposes in civil aeronautical applications tandards N 93422 32 NL 5413 N 1599 M T1 list LN 2954 escription Light weight version of MIL 26482 eries II Intermateable
Standard Cartridge Valves 2/2 Way Series NG16 NG100
Standard Cartridge Valves Way Series NG NG Table of Contents Designation Symbol Page General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.
Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page
CS3 ULTRA COMPACT EXTREMELY RUGGED JOYSTICK CONTROLLER
S3 ULT OMPT ETEMELY UGGE JOYSTIK ONTOLLE S3 S3H S3/ Hall-effect joystick Heavy duty Hall-effect joystick ang / bang onstruction: The S3 is an extremely rugged Joystick in an ultra-compact and versatile
Key features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
Push Button Switches. Switches 163. Miniature, round and rectangular push button switches available
Push utton Switches ulgin s broad line of pushbutton switches are available in various sizes and configurations. This includes a variety of illumination and terminal options as well as several with high
Temperature from -25 C to +100 C
MULTIIX IXING LMPS MULTIIX fixing clamps are particularly suitable when a series of pipelines must be installed requiring neat and high precision installation. These brackets make it possible to install
Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC
D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
Cool Drawer Single Sensor
The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor
Flow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
ISO cartridge valves type LID* Check function, ISO 7368 size from 16 to 100, high flow, Pmax 420 bar
Table H0409/E ISO cartridge valves type LID* Check function, ISO 78 size from to 00, high flow, Pmax 40 bar Functional cover Poppet Sleeve LIDO Spring Pilot operated check valve LIDR Directional control
Compact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
Quick-connect terminals (#110)
Sealed Subminiature Basic Switch D2SW-P Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealed to IEC IP67. Switch rating of 2 at 250 VC possible with a single-leaf
Assembly. 1 Compact version with valve plug 2 Short tube version with cable 3 Compact version with M12 plug 4 Short tube version with M12 plug
Vibration Limit Switch Features Limit switch for liquids External function test with test magnet Onsite function check possible thanks to LED indication Large selection of process connections for hassle-free
INDUSTRIAL PNEUMATICS - valves
Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve
Electropneumatic miniature control valves Mounting Connectors Minisolenoid valves Indicators LED seals LED Valve modules Poppet 3/2 single pilot 4/2 s
ElectroPneumatic Miniature Control Valves Order/Technical Support Tel: (800) 6773 / FAX: (800) 677386 / www.crouzetusa.com /47 Electropneumatic miniature control valves Mounting Connectors Minisolenoid
VCB22, 5/2 Solenoid actuated In-line spool valves
, / olenoid actuated nline spool valves >> ort size:, /... / ( ) >> ew design for industrial automation >> igh flow rate >> onnector with light as standard >> aintenancefree >> ubbase system for easy assembly
Item 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
Features. Specification. Model. Tube I.D. (mm) Medium Operating pressure range. Proof pressure. Ambient temperature. Available speed range
series eatures Non lubrication Special housing and bushing enables self lubrication of piston rod. High quality long service life Hard anodised aluminium cylinder tubes offer a high resistance to corrosion
NEOTECHA. PFA lined Ball Valves - Models SNB and SNC
NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest
8000 Series Bellows Stem Seal
8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem
ADAPTERS AND TUBE FITTINGS
DPTERS INDEX Section Pages Hose 15-67 Fittings 68-180 dapters and Tube Fittings 181-228 DPTERS ND TUE FITTINGS Description Page dapters raze and weld to 37 flare 221 raze and weld to split flange 220 SPP
Datasheet - ZS Z
Datasheet - ZS 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Plunger S thermoplastic enclosure Good resistance to oil and petroleum spirit Wide range of alternative
General Specifications
Half-Inch Diameter Process Sealed Rotaries Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles eneral Specifications Electrical
Mini Bellows Pumps. 180 Hines Ave. Bellville, OH PH: FAX:
Mini Bellows Pumps Mini Bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI s time-proven bellows technology to provide
3/2 Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Indirect controlled solenoid operated poppet valves Internal thread G/, / NPT or flanged with NMUR interface Main application: single operated process actuators TÜV-approval
Ideal Vacuum Products 5910 Midway Park NE, Albuquerque, NM Our products develop tomorrow s technologies
Our products develop tomorrow s technologies We are proud of our Ideal Vacuum Super-Seal bellows valves as they are manufactured to meet the highest standards. Our bellows valve design includes a hermetically
V88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
Datasheet - ZR Z
Print - Create PDF - Create EXCEL file 21.04.2011-16:57:42h Datasheet - ZR 236-11Z Position switch / 236 thermoplastic enclosure - DIN EN 50047 with Actuator / 236 Roller plunger R thermoplastic enclosure
21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
1280 Enterprise Series Programmable Color Touchscreen Weight Indicator/Controller
1280 nterprise Series 520 Panel Mount Standard Features 7-inch Touch-only Seven-inch, 800 x 480 pixel, graphical color display that adjusts for ambient light conditions Twelve-inch, 1280 x 800 pixel, graphical
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
DOCUMENT STATUS: - NOTICE OF PROPRIETARY INFORMATION
RVSON STORY RV T SRPTON O Y 50 /0/00 PROUTON RLS 4 MM //0 RPL P/N 40- WT 40-; RPL P/N 40-00 & 40-0 WT 40-45 N RMOV P/N 40-54 & 40-000 ROM T SSMLY 55 S //0 UPT NLR N ST SSY 5 MM 0//0 RPL 40- WT 40- TO SR
STANDARD CARTRIDGE VALVES 2/2-WAY
STNDRD CRTRIDGE VLVES -WY SERIES NG NG ulletin - DESIGNTION SYMOL PGE General Description and Operating Principle Specifications and Characteristic Parameters Typical Characteristic Curves - -way Cartridge
M10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13,
Multitite F grey: Light and flexible. Type F is, among others, being used in the buildingindustry, connection of control panels and protection against rodents. F is applied for quick and easy mounting
MPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
Models A6100 & A6200 Purgemaster SNAP-IN Small Flowmeter. Long-term reliable performance flowmeters with low cost-of-ownership
ata sheet Purgemaster SNP-IN Small Flowmeter Long-term reliable performance flowmeters with low cost-of-ownership High strength stainless steel body the body is corrosion resistant stainless steel, rigidly
S675, S750 Stretchair Parts List A D
Page of 7 F G PRTS LIST Number Part Number escription M675-038 STR, 6" NTRL LOKING, TOTL LK TWIN WHL M675-04 STR, 6" NTRL LOKING, IR LK, TWIN WHL S-HX-ZP-M6-0 SRW, HX H, M6 X 0 MM LG 4 W-LI-ZP-5-47-03
Spare Parts. Small Single Seat Valve SP70860-GB
Spare Parts Small Single Seat Valve SP70860-GB1 2003-09 Stop Valve 12.7-19 mm 2 Reg.: 2003-05 Intro.: 2003-05 Stop Valve 12.7-19 mm Pos. Qty. Denomination 12.7 mm 19 mm Actuator, complete... 9612-9404-01
HIGH PRESSURE VALVES, FITTINGS AND TUBING
PRSSUR VVS, TTNS N TUN utech igh Pressure Valves are designed for liquid and gas flow control in petroleum, chemical, power generating and general industrial applications. vailable in a variety of body
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
4. Absorb System Shock: Swivel joints are not rigid and therefore capable of absorbing some hose shortening when the system is pressurized.
Swivel Joints Table of Contents Advantages of using Eaton Swivel Joints 2 Selection Criteria and Product Safety Considerations 3 FS6500 4 Features and Benefits 4 Performance Testing 4 Repair Kit 10 BD5500
Flow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
RT2E Compact temperature switch Explosion proof
ompact temperature switch Explosion proof Main Features Excellent repeatability Dead band adjustment for regulation Fix dead band for control and alarm Light weight Explosion proof Hazardous areas 1, 2,
Datasheet - ZR Z
12.02.2016-22:08:18h Datasheet - ZR 235-11Z Position switch / 235 Metal enclosure - DIN EN 50047 with Actuator / 235 Roller plunger r Preferred typ Metal enclosure Wide range of alternative actuators Good
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
BILL OF QUANTITIES DESCRIPTION QTY UNIT RATE AMOUNT ITEM NO. GROUND FLOOR EQUIPMENTS. No. One meter patch cords. No. Three meter patch cords
O QUNTTS O QUNTTS TM ROUN OOR QUPMNTS One meter patch cords 60. Three meter patch cords 60. at 6e cable in boxes of 300meters 5. ore fibre switch 6-ports PO managed 8portgiganet PO managed catalyst switch
VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
General Specifications
Series General Specifications Electrical Capacity (Resistive Load) Low/Logic Level: m @ V DC maximum for Standard Operating Force models m @ V DC maximum for igh Operating Force models Other Ratings Standard
V88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
Z-15GW2277 Z-15GW2277-B
Basic Switch GENERAL PURPOSE General Purpose Basic Switch High precision basic switch in a variety of styles Wide margins of operating conditions increase the operating speed range Available in general
Quick Selection Guide
Quick Selection Guide Signal Connectors M23 Coupling ayonet Coupling CONINVERS Edition 03/02 Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Number of Contacts (View: mating face) Contact
Manufactured in the USA. Cushioning & Clamping Products
Manufactured in the US ushioning & lamping Products U-olt Series U.S. PTNT NO. 4,934,635 4,997,148 5,014,9 esigned for the tough jobs, the U-olt Series secures pipe runs to any flat surface. Provides total
8525 Series. Hermetic connectors. Backshells aluminum version. Backshells stainless steel version. basic series I H 18 B 32 P N H
Linkto8526eries 8525 eries Hermetic connectors basic series 8525 I H 32 N H type obligatory suffix I solder fixing receptacle 2 square flange receptacle 7 jam nut receptacle hermetic version H stainless
Ball valve Metal. Sectional view. * see information on working medium on page PED/97/23/EC Category III Module H TA-LUFT
all valve Metal Construction GEMÜ is a 2/2-way stainless steel ball valve with top flange EN ISO 5211 in sizes DN 15 to 100. It has a low maintenance electric actuator with a powerful DC motor. The reduction
98015 series, 3/2 Direct solenoid actuated poppet valve
90 series, / > Port size: / & / (ISO G/NPT), NAMUR Interface > Main application: Single acting actuators > TÜV-approval based on type eamination DGRL 9//EG and IE 0, multichannel up to SIL > Optional add-on
MDSM is the commercial industry s
MSM is the commercial industry s smallest -type connector for shielded I/O wire-to-board applications. Requiring less than 1/3 the area of a traditional Subminiature connector, MSM is designed for situations
More than safety. Precision Multiple Limit Switches
More than safety. Precision Multiple Limit Switches Automation More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian
Series mm 21 x 21 mm 21 x 27 mm IP65 3 A 250 VAC. Product Profile. Ordering Guide Choice of front bezel determines front shape
Series 7.5 mm x mm x 7 mm IP65 3 50 V INDITOR pushbutton keylock selector hoose one component from each of the coloured sections to assemble a complete switch. Product Profile The Series 7 is a high quality,
Front Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
G. S50T60. B3. S1. Suction cups/grippers pigrip Modular suction cups. Product Group. Lip. Bellows or Flat Cup. Support. pigrip.
Suction cups/grippers pigrip odular suction cups Product Group pigrip Lip Bellows or lat Cup Support Dimension & Type aterial & Durometer G S25 Ø 25 mm Standard lip B1 1 bellows S1 Support type 1 S35 S50
D2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water
Sputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.