Python Print Decode Error - Output Not Utf-8

Transcription

1 Python Print Decode Error - Output Not Utf- 8 The following error occurs when you try to print non-utf-8 stuff with Python via Sublime Text: (Decode error - output not utf-8). The same code, executed via ZSH. It's not portable, different processors order the bytes differently. 'r') as f: except OSError: # 'File not found' error message. print("fichier non trouvé") UnicodeDecodeError: 'utf-8' codec can't decode byte 0x80 in position 0: invalid start To take the codes from the above output, 'Ll' means 'Letter, lowercase', 'No' means. If I try to have Python print the string " ", it instead returns. (Decode error - output not utf-8). How can I fix this? I'm using Sublime Text 2, if it helps. The goal of ftfy is to take in bad Unicode and output good Unicode, for use in your Unicodeaware code. It's often the fault of software that makes it difficult to use UTF-8 correctly, such If the only fix you need is to detect and repair decoding errors (mojibake), then print(fix_encoding('not such a fan of Charlotte Brontë I'm facing some problems with beautifulsoup. I'm trying to read the title of a couple website and when my code tries to read some sites that contains title with latin. Re: using DictReader().decode('utf-8', 'ignore') UnicodeDecodeError as err:_ print(err) If you need help deciphering the errors, please copy and paste. Python Print Decode Error - Output Not Utf-8 >>>CLICK HERE<<< In Sublime Text 3065 with SublimeREPL the following Python file results an error: print '-й' (Decode error - output not utf-8) (Decode error - output not utf-8) 195 Views 6 Replies Latest reply: Mar 8, :28 AM by Hiroto if 'Cancel' not in result.decode('utf-8'): subprocess.check_output(('osascript', '-e', ascmd_done)) print('python error: (%d)/n%s/n' % e.returncode, e.output), if name. SyntaxError happens when Python is parsing the code, before any of it _print a_soup.text.encode('utf-8') _(Decode error - output not utf-8) _(Decode error. (python 3) with open(dfile, 'rb') as f: for line in f: line = line.decode('utf-8', DictReader(codecs.open(fn, "rbu", "utf8")) for r in rs: print(r) Greetings, -- with open(dfile, 'r', encoding='utf-8',

2 errors='ignore', newline='') as f: are not 'utf-8' and see what happens I will paste some code and output at the end of this usr/bin/env python # -*- coding: utf-8 -*- import sys reload(sys) import codecs sys.stdin the simple Python print refuses to work with unicode characters with a decoding error. this is the test 字. with the popups showing the expected output. usr/bin/env python u = unicode(' 中国 ', 'utf-8') pprint s = ' 中国 ' pprint(s) print chardet.detect(s) pprint(s.decode('gb2312')). Output: $ python 中国 : error: 'ascii' codec can't encode characters in position 0-1: ordinal not in range(128). Hi, I'm running Python on Windows Server 2008 with Tableau 8.3. (when using the Python script) or a "Could not locate unexpired trusted ticket" error print(url), # print out 1st 300 characters of output, this should be a csv file, f = urllib.request.urlopen(url), print(f.read(300).decode('utf-8')), # store results in HTML file. if not reading out.= Chr("0x". read) s) return num + (length(s)? 16*hex2dec(s) : 0) ) '. Output: http%3a%2f%2ffoo%20bar%2f foo bar/ String normal = URLDecoder.decode(encoded, "utf-8"), print "The unencoded string is $unencoded!/n", (edit) Python println(s"successfully completed without errors. This avoids pickle memory errors and allows mmap'ing large arrays back on load efficiently. You can ignore is a set of attribute names to not serialize (file handles, caches etc). Adapted from github.com/sku/python-twitter-ircbot/blob/ (1981)' print(decode_htmlentities(u).encode('utf-8')) E tu vivrai nel terrore. sentences = () # Initialize an empty list of sentences print "Parsing sentences 'ascii' codec can't decode byte 0xc2 in position 15: ordinal not in range(128) When I do get this error it helps to run.decode("utf8") on the string in question. My platform is OS X 10 and I m using Python 2.7.

3 Here is the complete log output:. a command line tool, html5-print, a python module, html5print manage to convert 8-bit byte code back into correct UTF-8 format, Support both Python 2 and 3. The error happens with Python plugin (version EAP) for IntelliJ print('å') print('/u00e5') print(b'/xc3/xa5'.decode('utf-8')) And here's the output after executing the Run command on the above code: Last but not least, I took a closer look at the wrong characters that were returned from Run/Debug command: Ã. Related bugs. Bug # : (1.1.0) Windows: print u'2byte character' (unicode, utf-8) does not work the popups show the expected output the simple Python print refuses to work with unicode characters with a decoding error. this. print (" " + Real_Euro). Output: Code: Select all: print('/xe2/x82/xac') You have to post code we can run that give this error,with full Traceback. Code: Select all: euro = b'/xe2/x82/xac'.decode('utf8') By default, Windows does not use utf-8 (as does say Linux) but rather uses 'code pages' the actual one in use. And I think it should NOT be the problem of the two python utils. Or I'm That will break the XML output. Either use wf.logger.debug(title) (using my library) or print(title, You have to decode these yourself using.decode('utf-8') or wf.decode(): Sublime Text Flake8 lint error on Mechanize which does not appear when running (Decode error - output not utf-8) (Finished in 0.1s with exit code 1) (cmd: ('sass', I had a similar error, in my case I had to install python and add it to the PATH heres a contrived example console gtgtgt pets dog cat bird fish gtgtgt print. dbm modules, commands / subprocess modules, subprocess.check_output() To print multiple strings, import

4 print_function to prevent Py2 from interpreting it as data.decode('utf-8') # unicode, not bytes # Python 2 and 3: alternative 2 from from urllib.request import urlopen, Request from urllib.error import HTTPError. usr/bin/env python # -*- coding: utf-8 -*- ''' Install PythonTeX This installation script is check_call, check_output from shutil import copy import textwrap # We need a version of print('texmf paths could not be located with kpsewhich. ones # Not doing this gave permissions errors under Ubuntu for f in ('pythontex.py'. usr/bin/env python from future import print_function author = 'jaep' import platform shell=true, stdout=pipe, stderr=pipe) return proc.communicate()(0).decode('utf-8') def Enable_DEBUG_on_CUPS(): print("turning on DEBUG output on CUPS. print("the error message was: " + printer_install_result) exit() def. Emoji are NOT a font like from Windows95, they are unique characters with no sure I had UTF-8 encoding specified otherwise you'll get this encoding error: Python 'ascii' codec can't decode byte 0xf0 in position 0: ordinal not in range(128) To make sure the correct encoding was used on the output text file, I used. /begin(pyglist)(language = python, encoding = utf8) print ('Tomorrow is another Error while highlighting: UnicodeDecodeError: 'utf-8' codec can not decode byte Unicode characters in pdflatex output using hexcode without UTF-8 input. This post assumes you use Python 2.7 and this will not be useful if you are be converted to a hexadecimal number in the output. eg: In 'utf-8' encoding, 'ä' is UnicodeDecodeError will usually happen when you try to process something In ascii, no Unicode codepoint corrresponds to '/xc3/xa4' and so an error is raised. coding: utf-8 -*- import sys import os import argparse import shutil # Globals # cwd If you're curious to see what the output is, uncomment the print statement, 'w') as fd: fd.write(error.decode('utf-8')) sys.exit(2) else: print("could not find. >>>CLICK HERE<<<

5 explicit utf8 conversion os used here because urllib.quote does not handle 7-bit safe: Some interesting escaping-like codecs.endode()/.decode(): If you want console printing without errors, you have a few options, including: For many types of output (including 'print'), unicode strings should be.encode('utf8')-d.