Chapter 2: Measurement and Problem Solving

Transcription

1 Chapter 2: Measurement and Problem Solving

2 Determine which digits in a number are significant. Round numbers to the correct number of significant figures. Determine the correct number of significant figures in calculations.

3 Measurements are only as reliable as the instrument used, and the care with which the measurement is made.

4

5 Accuracy: How close a measurement is to the correct or accepted value Precision: How close a set of measurements are to each other

6

7 The percent error is how far off your own measurement or calculation is from the correct value.

8 What value should you record as the length of the beetle? Explain your answer. (The ruler is showing cm)

9 Significant figures are the digits in a measurement that are known for certain, plus one uncertain digit. As scientists, we do not care about any digits that are not significant. When we take measurements in lab we only report significant figures.

10 In the example, we are certain that the beetle is at least 1.5 cm in length, but the hundredths place is uncertain. We would therefore report this value as 1.55 The one and five are certain digits The second five is uncertain (depending on your opinion, you might report this as 1.54 or 1.56 these would also be correct) Therefore, this measurement has three total significant figures (two certain digits and one uncertain digit)

11 1.55

12 How to determine significant figures: 1. All nonzero digits are significant. 2. Interior zeros (zeros between two nonzero numbers) are significant. 3. Trailing zeros (zeros to the right of a nonzero number) that fall after a decimal point are significant.

13 4. Trailing zeros that fall before a decimal point are significant. 5. Leading zeros (zeros to the left of the first nonzero number) are NOT significant. They serve only to locate the decimal point. 6. Trailing zeros at the end of a number with no decimal point are NOT significant.

14 Exact numbers are not counted as significant figures. Exact counting of discrete objects Numbers that are part of an equation Defined quantities (e.g. a dozen, a mole, etc) Some conversion factors are defined quantities, while others are not. 1 in. = 2.54 cm exact

15 How many significant figures are in each number? a) b) c) 2371 e) 1 dozen = 12 f) g) 100,000 d)

16 Rules for Rounding: When numbers are used in a calculation, the result is rounded to reflect the significant figures of the data. For calculations involving multiple steps, round only the final answer do not round off between steps. This practice prevents small rounding errors from affecting the final answer.

17 Round down if the last digit dropped is 4 or less; round up if the last digit dropped is 5 or more.

18 Round to 3 sig-figs: Round to 3 sig-figs: Round to 3 sig-figs:

19 Multiplication and Division Rule: The result of multiplication or division carries the same number of significant figures as the factor with the fewest significant figures.

20 The intermediate result (in blue) is rounded to two significant figures to reflect the least precisely known factor (0.10), which has two significant figures.

21 The intermediate result (in blue) is rounded to three significant figures to reflect the least precisely known factor (6.10), which has three significant figures.

22 Addition and Subtraction Rule: In addition or subtraction calculations, the result carries the same number of decimal places as the quantity carrying the fewest decimal places.

23 We round the intermediate answer (in blue) to two decimal places because the quantity with the fewest decimal places (5.74) has two decimal places.

24 We round the intermediate answer (in blue) to one decimal place because the quantity with the fewest decimal places (4.8) has one decimal place.

25 In calculations involving both multiplication /division and addition/subtraction: do the steps in parentheses first determine the correct number of significant figures in the intermediate answer without rounding then do the remaining steps.

26 3.489 ( ) do the step in parentheses first = 3.37 Use the subtraction rule to determine that the intermediate answer has only one significant decimal place. To avoid small errors, it is best not to round at this point; instead, underline the least significant figure as a reminder = = 12 Use the multiplication rule to determine that the intermediate answer (11.758) rounds to two significant figures (12) because it is limited by the two significant figures in 3.37.

27 Perform each calculation to the correct number of significant figures. a)

28 Perform each calculation to the correct number of significant figures. a)

29 Perform each calculation to the correct number of significant figures.

30 Perform each calculation to the correct number of significant figures.

31 Perform each calculation to the correct number of significant figures. a) ( )

32 Perform each calculation to the correct number of significant figures. a) ( )

33 Which calculation would have its result reported to the greater number of significant figures? a) 3 + (15/12) b) (3 + 15)/12