PIC16F84A 7.0 INSTRUCTION SET SUMMARY INSTRUCTIONS DESCRIPTIONS

Size: px
Start display at page:

Download "PIC16F84A 7.0 INSTRUCTION SET SUMMARY INSTRUCTIONS DESCRIPTIONS"

Transcription

1 PI6F84A 7.0 INSTRUTION SET SUMMARY Each PI6XX instruction is a 4bit word, divided into an OPODE which specifies the instruction type and one or more operands which further specify the operation of the instruction. The PI6XX instruction set summary in Table 7 lists byteoriented, bitoriented, and literal and control operations. Table 7 shows the opcode field descriptions. For byteoriented instructions, f represents a file register designator and d represents a destination designator. The file register designator specifies which file register is to be used by the instruction. The destination designator specifies where the result of the operation is to be placed. If d is zero, the result is placed in the W register. If d is one, the result is placed in the file register specified in the instruction. For bitoriented instructions, b represents a bit field designator which selects the number of the bit affected by the operation, while f represents the address of the file in which the bit is located. For literal and control operations, represents an eight or eleven bit constant or literal value. TABLE 7: Field f W b OPODE FIELD DESRIPTIONS Description Register file address (0x to 0x7F) Woring register (accumulator) Bit address within an 8bit file register Literal field, constant data or label x Don't care location (= 0 or ) The assembler will generate code with x = 0. It is the recommended form of use for compatibility with all Microchip software tools. d Destination select; d = 0: store result in W, d = : store result in file register f. Default is d = P TO PD Program ounter Timeout bit Powerdown bit The instruction set is highly orthogonal and is grouped into three basic categories: Byteoriented operations Bitoriented operations Literal and control operations All instructions are executed within one single instruction cycle, unless a conditional test is true or the program counter is changed as a result of an instruction. In this case, the execution taes two instruction cycles with the second cycle executed as a NOP. One instruction cycle consists of four oscillator periods. Thus, for an oscillator frequency of 4 MHz, the normal instruction execution time is µs. If a conditional test is true or the program counter is changed as a result of an instruction, the instruction execution time is µs. Table 7 lists the instructions recognized by the MPASM Assembler. Figure 7 shows the general formats that the instructions can have. Note: All examples use the following format to represent a hexadecimal number: 0xhh where h signifies a hexadecimal digit. FIGURE 7: To maintain upward compatibility with future PI6XX products, do not use the OPTION and TRIS instructions. GENERAL FORMAT FOR INSTRUTIONS Byteoriented file register operations OPODE d f (FILE #) d = 0 for destination W d = for destination f f = 7bit file register address Bitoriented file register operations OPODE b (BIT #) f (FILE #) b = 3bit bit address f = 7bit file register address Literal and control operations General OPODE = 8bit immediate value ALL and GOTO instructions only (literal) OPODE = bit immediate value (literal) A description of each instruction is available in the PImicro MidRange Reference Manual (DS3303). 0 Microchip Technology Inc. DS357Bpage 35

2 PI6F84A TABLE 7: PI6XXX INSTRUTION SET Mnemonic, Operands Description ycles MSb 4Bit Opcode LSb Status Affected Notes ADDWF ANDWF LRF LRW OMF DEF DEFS INF INFS IORWF MOVF MOVWF NOP RLF RRF SUBWF SWAPF XORWF BF BSF BTFS BTFSS ADDLW ANDLW ALL LRWDT GOTO IORLW MOVLW RETFIE RETLW RETURN SLEEP SUBLW XORLW f f f, b f, b f, b f, b Add W and f AND W with f lear f lear W omplement f Decrement f Decrement f, Sip if 0 Increment f Increment f, Sip if 0 Inclusive OR W with f Move f Move W to f No Operation Rotate Left f through arry Rotate Right f through arry Subtract W from f Swap nibbles in f Exclusive OR W with f Bit lear f Bit Set f Bit Test f, Sip if lear Bit Test f, Sip if Set Add literal and W AND literal with W all subroutine lear Watchdog Timer Go to address Inclusive OR literal with W Move literal to W Return from interrupt Return with literal in W Return from Subroutine Go into standby mode Subtract W from literal Exclusive OR literal with W BYTEORIENTED FILE REGISTER OPERATIONS () () BITORIENTED FILE REGISTER OPERATIONS () () LITERAL AND ONTROL OPERATIONS bb 0bb 0bb bb x 0 0 xx 0xx 0x lfff 0xxx lfff 0xx0 bfff bfff bfff bfff xxxx 0 0,D,,D,,D, TO,PD TO,PD,D, Note : When an I/O register is modified as a function of itself ( e.g., MOVF PORTB, ), the value used will be that value present on the pins themselves. For example, if the data latch is for a pin configured as input and is driven low by an external device, the data will be written bac with a 0. : If this instruction is executed on the TMR0 register (and, where applicable, d = ), the prescaler will be cleared if assigned to the Timer0 Module. 3: If Program ounter (P) is modified or a conditional test is true, the instruction requires two cycles. The second cycle is executed as a NOP.,,,,,,3,,,3,,,,,,,,, 3 3 Note: Additional information on the midrange instruction set is available in the PImicro MidRange MU Family Reference Manual (DS3303). DS357Bpage 36 0 Microchip Technology Inc.

3 PI6F84A 7. Instruction Descriptions ADDLW Add Literal and W [label] ADDLW 0 55 (W) + (W), D, The contents of the W register are added to the eightbit literal and the result is placed in the W register. BF Bit lear f [label] BF f,b 0 f 7 0 b 7 0 (f<b>) Bit 'b' in register 'f' is cleared. ADDWF Add W and f [label] ADDWF f,d 0 f 7 d [0,] (W) + (f) (destination), D, Add the contents of the W register with If d is 0, the result is stored in the W register. If d is, the result is stored bac in BSF Bit Set f [label] BSF f,b 0 f 7 0 b 7 (f<b>) Bit 'b' in register 'f' is set. ANDLW AND Literal with W [label] ANDLW 0 55 ANDWF (W).AND. () (W) The contents of W register are AND ed with the eightbit literal ''. The result is placed in the W register. AND W with f [label] ANDWF f,d 0 f 7 d [0,] (W).AND. (f) (destination) AND the W register with register 'f'. If 'd' is 0, the result is stored in the W register. If 'd' is, the result is stored bac in register 'f'. BTFSS Bit Test f, Sip if Set [label] BTFSS f,b 0 f 7 0 b < 7 sip if (f<b>) = If bit 'b' in register 'f' is '0', the next instruction is executed. If bit 'b' is '', then the next instruction is discarded and a NOP is executed instead, maing this a TY instruction. 0 Microchip Technology Inc. DS357Bpage 37

4 PI6F84A BTFS Bit Test, Sip if lear [label] BTFS f,b 0 f 7 0 b 7 sip if (f<b>) = 0 If bit b in register f is, the next instruction is executed. If bit b in register f is 0, the next instruction is discarded, and a NOP is executed instead, maing this a TY instruction. LRWDT lear Watchdog Timer [ label ] LRWDT h WDT 0 WDT prescaler, TO PD TO, PD LRWDT instruction resets the Watchdog Timer. It also resets the prescaler of the WDT. Status bits TO and PD are set. ALL all Subroutine [ label ] ALL (P)+ TOS, P<0:0>, (PLATH<4:3>) P<:> all Subroutine. First, return address (P+) is pushed onto the stac. The elevenbit immediate address is loaded into P bits <0:0>. The upper bits of the P are loaded from PLATH. ALL is a twocycle instruction. OMF omplement f [ label ] OMF f,d 0 f 7 d [0,] (f) (destination) complemented. If d is 0, the result is stored in W. If d is, the result is stored bac in LRF lear f [label] LRF f 0 f 7 LRW h (f) cleared and the bit is set. lear W [ label ] LRW h (W) W register is cleared. ero bit () is set. DEF Decrement f [label] DEF f,d 0 f 7 d [0,] (f) (destination) Decrement If d is 0, the result is stored in the W register. If d is, the result is stored bac in DS357Bpage 38 0 Microchip Technology Inc.

5 PI6F84A DEFS Decrement f, Sip if 0 0 f 7 d [0,] [ label ] DEFS f,d (f) (destination); sip if result = 0 decremented. If d is 0, the result is placed in the W register. If d is, the result is placed bac in If the result is, the next instruction is executed. If the result is 0, then a NOP is executed instead, maing it a TY instruction. INFS Increment f, Sip if 0 0 f 7 d [0,] [ label ] INFS f,d (f) + (destination), sip if result = 0 incremented. If d is 0, the result is placed in the W register. If d is, the result is placed bac in If the result is, the next instruction is executed. If the result is 0, a NOP is executed instead, maing it a TY instruction. GOTO Unconditional Branch [ label ] GOTO P<0:0> PLATH<4:3> P<:> GOTO is an unconditional branch. The elevenbit immediate value is loaded into P bits <0:0>. The upper bits of P are loaded from PLATH<4:3>. GOTO is a twocycle instruction. IORLW Inclusive OR Literal with W [ label ] IORLW 0 55 (W).OR. (W) The contents of the W register are OR ed with the eightbit literal ''. The result is placed in the W register. INF Increment f [ label ] INF f,d 0 f 7 d [0,] (f) + (destination) incremented. If d is 0, the result is placed in the W register. If d is, the result is placed bac in IORWF 0 f 7 d [0,] Inclusive OR W with f [ label ] IORWF f,d (W).OR. (f) (destination) Inclusive OR the W register with register 'f'. If 'd' is 0, the result is placed in the W register. If 'd' is, the result is placed bac in register 'f'. 0 Microchip Technology Inc. DS357Bpage 39

6 PI6F84A MOVF Move f [ label ] MOVF f,d 0 f 7 d [0,] (f) (destination) The contents of register f are moved to a destination dependant upon the status of d. If d = 0, destination is W register. If d =, the destination is file register f itself. d = is useful to test a file register, since status flag is affected. RETFIE Return from Interrupt [ label ] RETFIE TOS P, GIE MOVLW Move Literal to W [ label ] MOVLW 0 55 (W) The eightbit literal is loaded into W register. The don t cares will assemble as 0 s. RETLW Return with Literal in W [ label ] RETLW 0 55 (W); TOS P The W register is loaded with the eightbit literal ''. The program counter is loaded from the top of the stac (the return address). This is a twocycle instruction. MOVWF Move W to f [ label ] MOVWF f 0 f 7 (W) (f) Move data from W register to register 'f'. RETURN Return from Subroutine [ label ] RETURN TOS P Return from subroutine. The stac is POPed and the top of the stac (TOS) is loaded into the program counter. This is a twocycle instruction. NOP No Operation [ label ] NOP No operation No operation. DS357Bpage 40 0 Microchip Technology Inc.

7 PI6F84A RLF Rotate Left f through arry [ label ] RLF f,d 0 f 7 d [0,] See description below rotated one bit to the left through the arry Flag. If d is 0, the result is placed in the W register. If d is, the result is stored bac in Register f SUBLW Subtract W from Literal [ label ] SUBLW 0 55 (W) (W), D, The W register is subtracted ( s complement method) from the eightbit literal ''. The result is placed in the W register. RRF Rotate Right f through arry [ label ] RRF f,d 0 f 7 d [0,] See description below rotated one bit to the right through the arry Flag. If d is 0, the result is placed in the W register. If d is, the result is placed bac in Register f SUBWF Subtract W from f [ label ] SUBWF f,d 0 f 7 d [0,], D, (f) (W) (destination) Subtract ( s complement method) W register from register 'f'. If 'd' is 0, the result is stored in the W register. If 'd' is, the result is stored bac in register 'f'. SLEEP [ label ] SLEEP h WDT, 0 WDT prescaler, TO, 0 PD TO, PD The powerdown status bit, PD is cleared. Timeout status bit, TO is set. Watchdog Timer and its prescaler are cleared. The processor is put into SLEEP mode with the oscillator stopped. SWAPF Swap Nibbles in f [ label ] SWAPF f,d 0 f 7 d [0,] (f<3:0>) (destination<7:4>), (f<7:4>) (destination<3:0>) The upper and lower nibbles of register 'f' are exchanged. If 'd' is 0, the result is placed in W register. If 'd' is, the result is placed in register 'f'. 0 Microchip Technology Inc. DS357Bpage 4

8 PI6F84A XORLW Exclusive OR Literal with W [label] XORLW 0 55 (W).XOR. (W) The contents of the W register are XOR ed with the eightbit literal ''. The result is placed in the W register. XORWF Exclusive OR W with f [label] XORWF f,d 0 f 7 d [0,] (W).XOR. (f) (destination) Exclusive OR the contents of the W register with register 'f'. If 'd' is 0, the result is stored in the W register. If 'd' is, the result is stored bac in register 'f'. DS357Bpage 4 0 Microchip Technology Inc.

PIC16F87X 13.0 INSTRUCTION SET SUMMARY INSTRUCTIONS DESCRIPTIONS

PIC16F87X 13.0 INSTRUCTION SET SUMMARY INSTRUCTIONS DESCRIPTIONS PIC6F87X 3.0 INSTRUCTION SET SUMMARY Each PIC6F87X instruction is a 4bit word, divided into an OPCODE which specifies the instruction type and one or more operands which further specify the operation of

More information

PIC16C63A/65B/73B/74B

PIC16C63A/65B/73B/74B PI663A/65B/73B/74B 4.0 MEMORY ORGANIATION 4. Program Memory Organization The PI663A/65B/73B/74B has a 3bit program counter capable of addressing an 8K x 4 program memory space. All devices covered by this

More information

Assembly Language Instructions

Assembly Language Instructions Assembly Language Instructions Content: Assembly language instructions of PIC16F887. Programming by assembly language. Prepared By- Mohammed Abdul kader Assistant Professor, EEE, IIUC Assembly Language

More information

Chapter 4 Sections 1 4, 10 Dr. Iyad Jafar

Chapter 4 Sections 1 4, 10 Dr. Iyad Jafar Starting to Program Chapter 4 Sections 1 4, 10 Dr. Iyad Jafar Outline Introduction Program Development Process The PIC 16F84A Instruction Set Examples The PIC 16F84A Instruction Encoding Assembler Details

More information

Instuction set

Instuction set Instuction set http://www.piclist.com/images/www/hobby_elec/e_pic3_1.htm#1 In PIC16 series, RISC(Reduced Instruction Set Computer) is adopted and the number of the instructions to use is 35 kinds. When

More information

DHANALAKSHMI COLLEGE OF ENGINEERING, CHENNAI DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING. EE6008 Microcontroller based system design

DHANALAKSHMI COLLEGE OF ENGINEERING, CHENNAI DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING. EE6008 Microcontroller based system design Year: IV DHANALAKSHMI COLLEGE OF ENGINEERING, CHENNAI DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EE6008 Microcontroller based system design Semester : VII UNIT I Introduction to PIC Microcontroller

More information

CENG 336 INT. TO EMBEDDED SYSTEMS DEVELOPMENT. Spring 2006

CENG 336 INT. TO EMBEDDED SYSTEMS DEVELOPMENT. Spring 2006 CENG 336 INT. TO EMBEDDED SYSTEMS DEVELOPMENT Spring 2006 Recitation 01 21.02.2006 CEng336 1 OUTLINE LAB & Recitation Program PIC Architecture Overview PIC Instruction Set PIC Assembly Code Structure 21.02.2006

More information

SOLUTIONS!! DO NOT DISTRIBUTE!!

SOLUTIONS!! DO NOT DISTRIBUTE!! THE UNIVERSITY OF THE WEST INDIES EXAMINATIONS OF FEBRUARY MID-TERM 2005 Code and Name of Course: EE25M Introduction to Microprocessors Paper: Date and Time: Duration: One Hour INSTRUCTIONS TO CANDIDATES:

More information

Chapter 13. PIC Family Microcontroller

Chapter 13. PIC Family Microcontroller Chapter 13 PIC Family Microcontroller Lesson 15 Instruction Set Most instructions execution Time One instruction cycle If XTAL frequency = 20 MHz, then instruction cycle time is 0.2 s or 200 ns (= 4/20

More information

Lecture (04) PIC16F84A (3)

Lecture (04) PIC16F84A (3) Lecture (04) PIC16F84A (3) By: Dr. Ahmed ElShafee ١ Central Processing Unit Central processing unit (CPU) is the brain of a microcontroller responsible for finding and fetching the right instruction which

More information

UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2001/2002. Semester 2. Year 2 MICROCONTROLLER SYSTEMS. Module Code: EEE305J2. Time allowed: 3 Hours

UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2001/2002. Semester 2. Year 2 MICROCONTROLLER SYSTEMS. Module Code: EEE305J2. Time allowed: 3 Hours UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2001/2002 Semester 2 Year 2 MICROCONTROLLER SYSTEMS Module Code: EEE305J2 Time allowed: 3 Hours Answer as many questions as you can. Not more than TWO questions

More information

TOPIC 3 INTRODUCTION TO PIC ASSEMBLY LANGUAGE. E4160 Microprocessor & Microcontroller System. Prepared by : Puziah Yahaya JKE, POLISAS / DEC 2010

TOPIC 3 INTRODUCTION TO PIC ASSEMBLY LANGUAGE. E4160 Microprocessor & Microcontroller System. Prepared by : Puziah Yahaya JKE, POLISAS / DEC 2010 TOPIC 3 INTRODUCTION TO PIC ASSEMBLY LANGUAGE Prepared by : Puziah Yahaya JKE, POLISAS / DEC 2010 E4160 Microprocessor & Microcontroller System Learning Outcomes 2 At the end of this topic, students should

More information

Lesson 14. Title of the Experiment: Introduction to Microcontroller (Activity number of the GCE Advanced Level practical Guide 27)

Lesson 14. Title of the Experiment: Introduction to Microcontroller (Activity number of the GCE Advanced Level practical Guide 27) Lesson 14 Title of the Experiment: Introduction to Microcontroller (Activity number of the GCE Advanced Level practical Guide 27) Name and affiliation of the author: N W K Jayatissa Department of Physics,

More information

UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2001/2002 RESIT. Year 2 MICROCONTROLLER SYSTEMS. Module Code: EEE305J1. Time allowed: 3 Hours

UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2001/2002 RESIT. Year 2 MICROCONTROLLER SYSTEMS. Module Code: EEE305J1. Time allowed: 3 Hours UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2001/2002 RESIT Year 2 MICROCONTROLLER SYSTEMS Module Code: EEE305J1 Time allowed: 3 Hours Answer as many questions as you can. Not more than TWO questions

More information

PIC 16F84A programming (II)

PIC 16F84A programming (II) Lecture (05) PIC 16F84A programming (II) Dr. Ahmed M. ElShafee ١ Introduction to 16F84 ٣ PIC16F84 belongs to a class of 8-bit microcontrollers of RISC architecture. Program memory (FLASH) EEPROM RAM PORTA

More information

16.317: Microprocessor-Based Systems I Spring 2012

16.317: Microprocessor-Based Systems I Spring 2012 16.317: Microprocessor-Based Systems I Spring 2012 Exam 3 Solution 1. (20 points, 5 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by circling

More information

Section 31. Instruction Set

Section 31. Instruction Set 31 HIGHLIGHTS Section 31. Instruction Set Instruction Set This section of the manual contains the following major topics: 31.1 Introduction... 31-2 31.2 Data Memory Map... 31-3 31.3 Instruction Formats...

More information

16.317: Microprocessor Systems Design I Fall 2013 Exam 3 Solution

16.317: Microprocessor Systems Design I Fall 2013 Exam 3 Solution 16.317: Microprocessor Systems Design I Fall 2013 Exam 3 Solution 1. (20 points, 5 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by circling

More information

EEE111A/B Microprocessors

EEE111A/B Microprocessors EEE111A/B Microprocessors Revision Notes Lecture 1: What s it all About? Covers the basic principles of digital signals. The intelligence of virtually all communications, control and electronic devices

More information

Section 4. Architecture

Section 4. Architecture M Section 4. Architecture HIGHLIGHTS This section of the manual contains the following major topics: 4. Introduction...4-2 4.2 Clocking Scheme/Instruction Cycle...4-5 4.3 Instruction Flow/Pipelining...4-6

More information

LAB WORK 2. 1) Debugger-Select Tool-MPLAB SIM View-Program Memory Trace the program by F7 button. Lab Work

LAB WORK 2. 1) Debugger-Select Tool-MPLAB SIM View-Program Memory Trace the program by F7 button. Lab Work LAB WORK 1 We are studying with PIC16F84A Microcontroller. We are responsible for writing assembly codes for the microcontroller. For the code, we are using MPLAB IDE software. After opening the software,

More information

ECE Test #1: Name

ECE Test #1: Name ECE 376 - Test #1: Name Closed Book, Closed Notes. Calculators Permitted. September 23, 2016 20 15 10 5 0

More information

Fortune. Semiconductor Corporation 富晶半導體股份有限公司. 8-bit MCU with 1k program ROM, 64-byte RAM, 1 R2F module and 3 13 LCD driver. TD Rev. 1.

Fortune. Semiconductor Corporation 富晶半導體股份有限公司. 8-bit MCU with 1k program ROM, 64-byte RAM, 1 R2F module and 3 13 LCD driver. TD Rev. 1. Fortune 1 R2F module and 3 13 LCD driver. Data Sheet TD-0410001 Rev. 1.2 This manual contains new product information. Fortune reserves the rights to modify the product specification without further notice.

More information

PTK8756B 8 Bit Micro-controller Data Sheet

PTK8756B 8 Bit Micro-controller Data Sheet PTK8756B 8 Bit Micro-controller DEC 15, 2008 Ver1.1 普泰半導體股份有限公司 PORTEK Technology Corporation 公司地址 : 臺北縣新店市寶橋路 235 巷 120 號 4 樓 聯絡電話 : 886-2-89121055 傳真號碼 : 886-2-89121473 公司網址 : www.portek.com.tw Page1

More information

Week1. EEE305 Microcontroller Key Points

Week1. EEE305 Microcontroller Key Points Week1 Harvard Architecture Fig. 3.2 Separate Program store and Data (File) stores with separate Data and Address buses. Program store Has a 14-bit Data bus and 13-bit Address bus. Thus up to 2 13 (8K)

More information

TM57PA20/ TM57PA40. 8 Bit Microcontroller. User Manual. Tenx reserves the right to change or discontinue this product without notice.

TM57PA20/ TM57PA40. 8 Bit Microcontroller. User Manual. Tenx reserves the right to change or discontinue this product without notice. Advance Information TM57PA20/ TM57PA40 User Manual Tenx reserves the right to change or discontinue this product without notice. tenx technology inc. tenx technology, inc. CONTENTS FEATURES... 3 BLOCK

More information

16.317: Microprocessor-Based Systems I Summer 2012

16.317: Microprocessor-Based Systems I Summer 2012 16.317: Microprocessor-Based Systems I Summer 2012 Exam 3 Solution 1. (20 points, 5 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by circling

More information

Arithmetic,logic Instruction and Programs

Arithmetic,logic Instruction and Programs Arithmetic,logic Instruction and Programs 1 Define the range of numbers possible in PIC unsigned data Code addition and subtraction instructions for unsigned data Perform addition of BCD Code PIC unsigned

More information

EECE.3170: Microprocessor Systems Design I Summer 2017 Homework 5 Solution

EECE.3170: Microprocessor Systems Design I Summer 2017 Homework 5 Solution For each of the following complex operations, write a sequence of PIC 16F1829 instructions that performs an equivalent operation. Assume that X, Y, and Z are 16-bit values split into individual bytes as

More information

16.317: Microprocessor-Based Systems I Fall 2012

16.317: Microprocessor-Based Systems I Fall 2012 16.317: Microprocessor-Based Systems I Fall 2012 Exam 2 Solution 1. (20 points, 5 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by circling

More information

DERTS Design Requirements (1): Microcontroller Architecture & Programming

DERTS Design Requirements (1): Microcontroller Architecture & Programming Lecture (5) DERTS Design Requirements (1): Microcontroller Architecture & Programming Prof. Kasim M. Al-Aubidy Philadelphia University 1 Lecture Outline: Features of microcomputers and microcontrollers.

More information

/ 28 HLL assembly Q4: Conditional instructions / 40 TOTAL SCORE / 100 EXTRA CREDIT / 10

/ 28 HLL assembly Q4: Conditional instructions / 40 TOTAL SCORE / 100 EXTRA CREDIT / 10 16.317: Microprocessor Systems Design I Fall 2014 Exam 2 November 5, 2014 Name: ID #: For this exam, you may use a calculator and one 8.5 x 11 double-sided page of notes. All other electronic devices (e.g.,

More information

PIC Discussion. By Eng. Tamar Jomaa

PIC Discussion. By Eng. Tamar Jomaa PIC Discussion By Eng. Tamar Jomaa Chapter#2 Programming Microcontroller Using Assembly Language Quiz#1 : Time: 10 minutes Marks: 10 Fill in spaces: 1) PIC is abbreviation for 2) Microcontroller with..architecture

More information

University of Jordan Faculty of Engineering and Technology Department of Computer Engineering Embedded Systems Laboratory

University of Jordan Faculty of Engineering and Technology Department of Computer Engineering Embedded Systems Laboratory University of Jordan Faculty of Engineering and Technology Department of Computer Engineering Embedded Systems Laboratory 0907334 6 Experiment 6:Timers Objectives To become familiar with hardware timing

More information

PIN DESCRIPTION Name I/O Description VDD P VSS P 5V Power from USB cable Ground RC6M O X1 I Test/OTP mode clock in Internal clock output (6MHz) VPP I

PIN DESCRIPTION Name I/O Description VDD P VSS P 5V Power from USB cable Ground RC6M O X1 I Test/OTP mode clock in Internal clock output (6MHz) VPP I GENERAL DESCRIPTION The IN6005 is an 8-bit microprocessor embedded device tailored to the USB genernal purpose application. It includes an 8-bit RISC CPU core, 192-byte SRAM, Low Speed USB Interface and

More information

ABOV SEMICONDUCTOR 8-BIT SINGLE-CHIP MICROCONTROLLERS MC71PD506. USER S MANUAL (Ver. 1.0)

ABOV SEMICONDUCTOR 8-BIT SINGLE-CHIP MICROCONTROLLERS MC71PD506. USER S MANUAL (Ver. 1.0) ABOV SEMICONDUCTOR 8-BIT SINGLE-CHIP MICROCONTROLLERS MC71PD506 USER S MANUAL (Ver. 1.0) TABLE OF CONTENTS 1. PRODUCT OVERVIEW... 1 2. MEMORY ORGANIZATION... 12 3. INTERRUPT... 26 4. INSTRUCTIONS SET...

More information

Embedded Systems. PIC16F84A Sample Programs. Eng. Anis Nazer First Semester

Embedded Systems. PIC16F84A Sample Programs. Eng. Anis Nazer First Semester Embedded Systems PIC16F84A Sample Programs Eng. Anis Nazer First Semester 2017-2018 Development cycle (1) Write code (2) Assemble / compile (3) Simulate (4) Download to MCU (5) Test Inputs / Outputs PIC16F84A

More information

/ 40 Q3: Writing PIC / 40 assembly language TOTAL SCORE / 100 EXTRA CREDIT / 10

/ 40 Q3: Writing PIC / 40 assembly language TOTAL SCORE / 100 EXTRA CREDIT / 10 16.317: Microprocessor-Based Systems I Summer 2012 Exam 3 August 13, 2012 Name: ID #: Section: For this exam, you may use a calculator and one 8.5 x 11 double-sided page of notes. All other electronic

More information

16.317: Microprocessor Systems Design I Spring 2015

16.317: Microprocessor Systems Design I Spring 2015 16.317: Microprocessor Systems Design I Spring 2015 Exam 2 Solution 1. (16 points, 4 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by

More information

Chapter 3: Further Microcontrollers

Chapter 3: Further Microcontrollers Chapter 3: Further Microcontrollers Learning Objectives: At the end of this topic you will be able to: recall and describe the structure of microcontrollers as programmable assemblies of: memory; input

More information

16.317: Microprocessor Systems Design I Fall 2014

16.317: Microprocessor Systems Design I Fall 2014 16.317: Microprocessor Systems Design I Fall 2014 Exam 2 Solution 1. (16 points, 4 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by circling

More information

Q1: Multiple choice / 20 Q2: Protected mode memory accesses. / 40 Q3: Reading PIC. / 40 assembly language TOTAL SCORE / 100

Q1: Multiple choice / 20 Q2: Protected mode memory accesses. / 40 Q3: Reading PIC. / 40 assembly language TOTAL SCORE / 100 16.317: Microprocessor-Based Systems I Fall 2012 Exam 2 November 7, 2012 Name: ID #: For this exam, you may use a calculator and one 8.5 x 11 double-sided page of notes. All other electronic devices (e.g.,

More information

movwf prevcod ; a new button is pressed - rcnt=3 movwf (mtx_buffer+1) movlw 3 movwf rcnt

movwf prevcod ; a new button is pressed - rcnt=3 movwf (mtx_buffer+1) movlw 3 movwf rcnt movlw 0x20 #endif call scan movlw 0xfd tris PORTB ; select colb (RB1) #ifdef MODE_CH8 movlw 0x04 #endif #ifdef MODE_CH4 movlw 0x30 #endif call scan movf cod, W bz loop2 ; if no buton is pressed, skip subwf

More information

ALU and Arithmetic Operations

ALU and Arithmetic Operations EE25M Introduction to microprocessors original author: Feisal Mohammed updated: 6th February 2002 CLR Part IV ALU and Arithmetic Operations There are several issues connected with the use of arithmetic

More information

EE6008-Microcontroller Based System Design Department Of EEE/ DCE

EE6008-Microcontroller Based System Design Department Of EEE/ DCE UNIT- II INTERRUPTS AND TIMERS PART A 1. What are the interrupts available in PIC? (Jan 14) Interrupt Source Enabled by Completion Status External interrupt from INT INTE = 1 INTF = 1 TMR0 interrupt T0IE

More information

4.5.1) The Label Field ) The Mnemonic Field. 4.5) Assembly Language Program Structure A PIC18 ALP consists of 3 type of statements:

4.5.1) The Label Field ) The Mnemonic Field. 4.5) Assembly Language Program Structure A PIC18 ALP consists of 3 type of statements: 4.5) Assembly Language Program Structure A PIC18 ALP consists of 3 type of statements: 1) Assembler Directives To control the assembler: its input, output, and data allocation. Must be terminated with

More information

CONNECT TO THE PIC. A Simple Development Board

CONNECT TO THE PIC. A Simple Development Board CONNECT TO THE PIC A Simple Development Board Ok, so you have now got your programmer, and you have a PIC or two. It is all very well knowing how to program the PIC in theory, but the real learning comes

More information

D:\PICstuff\PartCounter\PartCounter.asm

D:\PICstuff\PartCounter\PartCounter.asm 1 ;********************************************************************** 2 ; This file is a basic code template for assembly code generation * 3 ; on the PICmicro PIC16F84A. This file contains the basic

More information

Mod-5: PIC 18 Introduction 1. Module 5

Mod-5: PIC 18 Introduction 1. Module 5 Mod-5: PIC 18 Introduction 1 Module 5 Contents: Overview of PIC 18, memory organisation, CPU, registers, pipelining, instruction format, addressing modes, instruction set, interrupts, interrupt operation,

More information

APPLICATION NOTE Wire Communication with a Microchip PICmicro Microcontroller

APPLICATION NOTE Wire Communication with a Microchip PICmicro Microcontroller Maxim > App Notes > 1-Wire DEVICES BATTERY MANAGEMENT Keywords: 1-wire, PICmicro, Microchip PIC, 1-Wire communication, PIC microcontroller, PICmicro microcontroller, 1 wire communication, PICs, micros,

More information

PIC16C84. 8-bit CMOS EEPROM Microcontroller PIC16C84. Pin Diagram. High Performance RISC CPU Features: CMOS Technology: Peripheral Features:

PIC16C84. 8-bit CMOS EEPROM Microcontroller PIC16C84. Pin Diagram. High Performance RISC CPU Features: CMOS Technology: Peripheral Features: 8-bit CMOS EEPROM Microcontroller High Performance RISC CPU Features: Only 35 single word instructions to learn All instructions single cycle (400 ns @ 10 MHz) except for program branches which are two-cycle

More information

Arithmetic and Logic Instructions. Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan

Arithmetic and Logic Instructions. Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan Arithmetic and Logic Instructions Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan chanhl@mail.cgu.edu.tw Find the sum of the values from 40H to 43H. Put the sum in filereg locations

More information

AN587. Interfacing to an LCD Module. Interfacing to an LCD Module INTRODUCTION OPERATION CONTROL SIGNAL FUNCTIONS TABLE 2: CONDITIONAL ASSEMBLY FLAGS

AN587. Interfacing to an LCD Module. Interfacing to an LCD Module INTRODUCTION OPERATION CONTROL SIGNAL FUNCTIONS TABLE 2: CONDITIONAL ASSEMBLY FLAGS Interfacing to an LCD Module AN587 INTRODUCTION TABLE 1: CONTROL SIGNAL FUNCTIONS This application note interfaces a PIC16CXX device to the Hitachi LM02L LCD character display module. This module is a

More information

Introduction to PIC Programming

Introduction to PIC Programming Introduction to PIC Programming Baseline Architecture and Assembly Language by David Meiklejohn, Gooligum Electronics Lesson 5: Using Timer0 The lessons until now have covered the essentials of baseline

More information

Section 11. Timer0. Timer0 HIGHLIGHTS. This section of the manual contains the following major topics:

Section 11. Timer0. Timer0 HIGHLIGHTS. This section of the manual contains the following major topics: M 11 Section 11. HIGHLIGHTS This section of the manual contains the following major topics: 11.1 Introduction...11-2 11.2 Control Register...11-3 11.3 Operation...11-4 11.4 TMR0 Interrupt...11-5 11.5 Using

More information

NH-67, TRICHY MAIN ROAD, PULIYUR, C.F , KARUR DT. DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING COURSE MATERIAL

NH-67, TRICHY MAIN ROAD, PULIYUR, C.F , KARUR DT. DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING COURSE MATERIAL NH-67, TRICHY MAIN ROAD, PULIYUR, C.F. 639 114, KARUR DT. DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING COURSE MATERIAL Subject Name : Embedded System Class/Sem : BE (ECE) / VII Subject Code

More information

PIC Discussion By Eng. Tamar Jomaa

PIC Discussion By Eng. Tamar Jomaa PIC Discussion By Eng. Tamar Jomaa 1 Write assembly language instructions to clear the general purpose registers of PIC16F84A microcontroller (don t write the whole program) 2 Islamic university Electrical

More information

16.317: Microprocessor Systems Design I Fall 2015

16.317: Microprocessor Systems Design I Fall 2015 16.317: Microprocessor Systems Design I Fall 2015 Exam 2 Solution 1. (16 points, 4 points per part) Multiple choice For each of the multiple choice questions below, clearly indicate your response by circling

More information

Chapter 5 Sections 1 6 Dr. Iyad Jafar

Chapter 5 Sections 1 6 Dr. Iyad Jafar Building Assembler Programs Chapter 5 Sections 1 6 Dr. Iyad Jafar Outline Building Structured Programs Conditional Branching Subroutines Generating Time Delays Dealing with Data Example Programs 2 Building

More information

M PIC16F84A. 18-pinEnhanced FLASH/EEPROM 8-Bit Microcontroller. High Performance RISC CPU Features: Pin Diagrams. Peripheral Features:

M PIC16F84A. 18-pinEnhanced FLASH/EEPROM 8-Bit Microcontroller. High Performance RISC CPU Features: Pin Diagrams. Peripheral Features: M PIC6F84A 8-pinEnhanced FLASH/EEPROM 8-Bit Microcontroller High Performance RISC CPU Features: Pin Diagrams Only 35 single word instructions to learn All instructions single-cycle except for program branches

More information

Hardware Interfacing. EE25M Introduction to microprocessors. Part V. 15 Interfacing methods. original author: Feisal Mohammed

Hardware Interfacing. EE25M Introduction to microprocessors. Part V. 15 Interfacing methods. original author: Feisal Mohammed EE25M Introduction to microprocessors original author: Feisal Mohammed updated: 18th February 2002 CLR Part V Hardware Interfacing There are several features of computers/microcontrollers which have not

More information

S w e d i s h c r. w e e b l y. c o m j a l i l a h m e l i v e. c o m Page 1

S w e d i s h c r. w e e b l y. c o m j a l i l a h m e l i v e. c o m Page 1 ********************************************************************** This file is a basic code template for assembly code generation * on the PICmicro PIC12C508. This file contains the basic code * building

More information

PIC16F8X. 8-Bit CMOS Flash/EEPROM Microcontrollers PIC16F8X PIC16CR8X. Pin Diagram. Devices Included in this Data Sheet:

PIC16F8X. 8-Bit CMOS Flash/EEPROM Microcontrollers PIC16F8X PIC16CR8X. Pin Diagram. Devices Included in this Data Sheet: This document was created with FrameMaker 404 PIC16F8X 8-Bit CMOS Flash/EEPROM Microcontrollers Devices Included in this Data Sheet: PIC16F83 PIC16CR83 PIC16F84 PIC16CR84 Extended voltage range devices

More information

PIC16F8X 18-pin Flash/EEPROM 8-Bit Microcontrollers

PIC16F8X 18-pin Flash/EEPROM 8-Bit Microcontrollers 18-pin Flash/EEPROM 8-Bit Microcontrollers Devices Included in this Data Sheet: PIC16F83 PIC16F84 PIC16CR83 PIC16CR84 Extended voltage range devices available (PIC16LF8X, PIC16LCR8X) High Performance RISC

More information

Power Aware Instruction Scheduling for Microcontrollers

Power Aware Instruction Scheduling for Microcontrollers International Journal of Scientific and Research Publications, Volume 2, Issue 10, October 2012 1 Power Aware Instruction Scheduling for Microcontrollers K.B.R.G.T. Samarasinghe, M.M.N.N. Jayasekara, D.

More information

SOLUTIONS!! DO NOT DISTRIBUTE PRIOR TO EXAM!!

SOLUTIONS!! DO NOT DISTRIBUTE PRIOR TO EXAM!! THE UNIVERSITY OF THE WEST INDIES EXAMINATIONS OF APRIL MID-TERM 2005 Code and Name of Course: EE25M Introduction to Microprocessors Paper: MidTerm Date and Time: Thursday April 14th 2005 8AM Duration:

More information

A Better Mouse Trap. Consumer Appliance, Widget, Gadget APPLICATION OPERATION: Ontario, Canada

A Better Mouse Trap. Consumer Appliance, Widget, Gadget APPLICATION OPERATION: Ontario, Canada A Better Mouse Trap Author: APPLICATION OPERATION: My application uses a PIC12C508 to produce realistic sounding mouse-like coos that all mice are sure to find seductive. The entire circuit should be imbedded

More information

PROGRAMMING PIC MICROCONTROLLERS WITH MICRO C

PROGRAMMING PIC MICROCONTROLLERS WITH MICRO C PROGRAMMING PIC MICROCONTROLLERS WITH MICRO C Chapter 1: World of Microcontrollers Chapter 2: Programming Microcontrollers Chapter 3: PIC16F887 Microcontroller Chapter 4: Examples Appendix A: It is Time

More information

ECE 354 Introduction to Lab 2. February 23 rd, 2003

ECE 354 Introduction to Lab 2. February 23 rd, 2003 ECE 354 Introduction to Lab 2 February 23 rd, 2003 Fun Fact Press release from Microchip: Microchip Technology Inc. announced it provides PICmicro field-programmable microcontrollers and system supervisors

More information

Hi Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan

Hi Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan Interrupts and Resets Hi Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan chanhl@mail.cgu.edu.twcgu Interrupts An event that will cause the CPU to stop the normal program execution

More information

RISC8 Core Page 1. RISC8 Core. Version 1.0. Written by Tom Coonan

RISC8 Core Page 1. RISC8 Core. Version 1.0. Written by Tom Coonan RISC8 Core Page 1 RISC8 Core Version 1.0 Written by Tom Coonan tcoonan@mindspring.com 1 Introduction... 2 2 Quick Start... 2 3 System Architecture... 3 4 Compatibility with Microchip 16C57 Devices... 6

More information

More (up a level)... Connecting the Nokia 3510i LCD to a Microchip PIC16F84 microcontroller

More (up a level)... Connecting the Nokia 3510i LCD to a Microchip PIC16F84 microcontroller 1 von 8 24.02.2010 21:53 More (up a level)... Connecting the Nokia 3510i LCD to a Microchip PIC16F84 microcontroller As with the FPGA board previously, the connections are made by soldering standard IDC

More information

Assembly Language Programming of 8085

Assembly Language Programming of 8085 Assembly Language Programming of 8085 1. Introduction A microprocessor executes instructions given by the user Instructions should be in a language known to the microprocessor Microprocessor understands

More information

PIC Architecture & Assembly Language Programming. Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan

PIC Architecture & Assembly Language Programming. Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan PIC Architecture & Assembly Language Programming Hsiao-Lung Chan Dept Electrical Engineering Chang Gung University, Taiwan chanhl@mail.cgu.edu.tw ALU with working register (WREG) and literal value 2 MOVLW

More information

Embedded System Design

Embedded System Design ĐẠI HỌC QUỐC GIA TP.HỒ CHÍ MINH TRƯỜNG ĐẠI HỌC BÁCH KHOA KHOA ĐIỆN-ĐIỆN TỬ BỘ MÔN KỸ THUẬT ĐIỆN TỬ Embedded System Design : Microcontroller 1. Introduction to PIC microcontroller 2. PIC16F84 3. PIC16F877

More information

Dept. of Computer Engineering Final Exam, First Semester: 2016/2017

Dept. of Computer Engineering Final Exam, First Semester: 2016/2017 Philadelphia University Faculty of Engineering Course Title: Embedded Systems (630414) Instructor: Eng. Anis Nazer Dept. of Computer Engineering Final Exam, First Semester: 2016/2017 Student Name: Student

More information

PART TWO LISTING 8 PROGRAM TK3TUT8 MOVF PORTA,W ANDLW B ADDWF COUNT,F MOVF COUNT,W MOVWF PORTB GOTO LOOP

PART TWO LISTING 8 PROGRAM TK3TUT8 MOVF PORTA,W ANDLW B ADDWF COUNT,F MOVF COUNT,W MOVWF PORTB GOTO LOOP EPE PIC TUTORIAL V2 JOHN BECKER PART TWO Quite simply the easiest low-cost way to learn about using PIC Microcontrollers! EPE PIC TUTORIAL In this part we play with switches, make noises, count times,

More information

ECE 354 Computer Systems Lab II. Interrupts, Strings, and Busses

ECE 354 Computer Systems Lab II. Interrupts, Strings, and Busses ECE 354 Computer Systems Lab II Interrupts, Strings, and Busses Fun Fact Press release from Microchip: Microchip Technology Inc. announced it provides PICmicro field-programmable microcontrollers and system

More information

PIC10F200/202/204/206 Data Sheet

PIC10F200/202/204/206 Data Sheet Data Sheet 6-Pin, 8-Bit Flash Microcontrollers DS4239A 6-Pin, 8-Bit Flash Microcontrollers Devices Included In ThisData Sheet: PIC0F200 PIC0F202 PIC0F204 PIC0F206 High-Performance RISC CPU: Only 33 single-word

More information

Controller Provides Display of Monitored Process Deviation

Controller Provides Display of Monitored Process Deviation Controller Provides Display of Monitored Process Deviation The gadget, shown in Figure 1.0, is implemented with a controller based process which continuously monitors two, discrete, momentary switch inputs

More information

PIC16C432 OTP 8-Bit CMOS MCU with LIN bus Transceiver

PIC16C432 OTP 8-Bit CMOS MCU with LIN bus Transceiver OTP 8-Bit CMOS MCU with LIN bus Transceiver Devices included in this Data Sheet: High Performance RISC CPU: Only 35 instructions to learn All single cycle instructions (200 ns), except for program branches

More information

Lesson 4 Fun with W and F

Lesson 4 Fun with W and F Elmer 160 Lesson 4 Overview Lesson 4 Introduction In this section This lesson introduces the first few PIC instructions. The following is a list of topics in this section: Description See Page Writing

More information

The University of Texas at Arlington Lecture 7

The University of Texas at Arlington Lecture 7 The University of Texas at Arlington Lecture 7 CSE 3442/5442 Agenda HW 2 due today Begin Chapter 5 In class assignment. Reading Assignment for Tuesday, Continue Reading Chapter 6. Assignment 3 and 4 due

More information

An Introduction & Guide to JALV2

An Introduction & Guide to JALV2 An Introduction & Guide to JALV2 An Introduction & Guide to JALV2 JAL is a high level language designed to hide the general nuisance of programming a MicroChip PIC processor. It is derived from the original

More information

Here is a sample of the Hellschrieber sent by this project: Following is the PIC MPASM Source Code for Version 0.03 of the Beacon:

Here is a sample of the Hellschrieber sent by this project: Following is the PIC MPASM Source Code for Version 0.03 of the Beacon: 1 of 16 12/16/2010 20:49 This is a simple circuit that does a fair bit of work. The core of the circuit is my favourite IC - the Microchip PIC 16F84 Microcontroller / RISC Microprocessor. This project

More information

Assembly Language Programming of 8085

Assembly Language Programming of 8085 Assembly Language Programming of 8085 Topics 1. Introduction 2. Programming model of 8085 3. Instruction set of 8085 4. Example Programs 5. Addressing modes of 8085 6. Instruction & Data Formats of 8085

More information

ME 515 Mechatronics. A microprocessor

ME 515 Mechatronics. A microprocessor ME 515 Mechatronics Microcontroller Based Control of Mechanical Systems Asanga Ratnaweera Department of Faculty of Engineering University of Peradeniya Tel: 081239 (3627) Email: asangar@pdn.ac.lk A microprocessor

More information

Discrete Logic Replacement A Keypad Controller for Bi-directional Key Matrix

Discrete Logic Replacement A Keypad Controller for Bi-directional Key Matrix A Keypad Controller for Bi-directional Key Matrix Author: Vladimir Velchev AVEX - Vladimir Velchev Sofia, Bulgaria email:avex@iname.com APPLICATION OPERATION: The PIC microcontroller can replace the traditional

More information

PIC10F200/202/204/206

PIC10F200/202/204/206 6-Pin, 8-Bit Flash Microcontrollers Devices Included In This Data Sheet: PIC0F200 PIC0F202 PIC0F204 PIC0F206 High-Performance RISC CPU: Only 33 Single-Word Instructions to Learn All Single-Cycle Instructions

More information

68HC11 PROGRAMMER'S MODEL

68HC11 PROGRAMMER'S MODEL 8H11 PROGRMMER'S MODEL s (,, and D) s and are general-purpose 8-bit accumulators used to hold operands and results of arithmetic calculations or data manipulations. Some instructions treat the combination

More information

MPASM and MPLINK PICmicro QUICK REFERENCE GUIDE

MPASM and MPLINK PICmicro QUICK REFERENCE GUIDE MPASM and MPLINK PICmicro QUICK REFERENCE GUIDE The Embedded Control Solutions Company MPASM Quick Reference Guide This Quick Reference Guide gives all the instructions, directives, and command line options

More information

Section 13. Timer0 HIGHLIGHTS. Timer0. This section of the manual contains the following major topics:

Section 13. Timer0 HIGHLIGHTS. Timer0. This section of the manual contains the following major topics: Section 13. Timer0 HIGHLIGHTS This section of the manual contains the following major topics: 13.1 Introduction... 13-2 13.2 Control Register... 13-3 13.3 Operation... 13-4 13.4 Timer0 Interrupt... 13-5

More information

Performance & Applications

Performance & Applications EE25M Introduction to microprocessors original author: Feisal Mohammed updated: 15th March 2002 CLR Part VI Performance & Applications It is possible to predict the execution time of code, on the basis

More information

PIC16F84A. 18-pin Enhanced Flash/EEPROM 8-Bit Microcontroller. Devices Included in this Data Sheet: Pin Diagrams. High Performance RISC CPU Features:

PIC16F84A. 18-pin Enhanced Flash/EEPROM 8-Bit Microcontroller. Devices Included in this Data Sheet: Pin Diagrams. High Performance RISC CPU Features: M PIC6F84A 8-pin Enhanced Flash/EEPROM 8-Bit Microcontroller Devices Included in this Data Sheet: PIC6F84A Extended voltage range device available (PIC6LF84A) High Performance RISC CPU Features: Only 35

More information

Midrange 8b PIC Microcontrollers. ECE Senior Design 14 February 2017

Midrange 8b PIC Microcontrollers. ECE Senior Design 14 February 2017 Midrange 8b PIC Microcontrollers ECE Senior Design 14 February 2017 Harvard vs. Von Neumann Harvard Architecture Program Memory 14-bit Bus CPU 8-bit Bus Data Memory Harvard architecture Separate busses

More information

Micro II and Embedded Systems

Micro II and Embedded Systems 16.480/552 Micro II and Embedded Systems Introduction to PIC Microcontroller Revised based on slides from WPI ECE2801 Moving Towards Embedded Hardware Typical components of a PC: x86 family microprocessor

More information

which means that writing to a port implies that the port pins are first read, then this value is modified and then written to the port data latch.

which means that writing to a port implies that the port pins are first read, then this value is modified and then written to the port data latch. Introduction to microprocessors Feisal Mohammed 3rd January 2001 Additional features 1 Input/Output Ports One of the features that differentiates a microcontroller from a microprocessor is the presence

More information

These 3 registers contain enable, priority,

These 3 registers contain enable, priority, 8.3.2) Registers Related to Interrupts These registers enable/disable the interrupts, set the priority of the interrupts, and record the status of each interrupt source. RCON INTCON, INTCON2, and INTCON3

More information

Semester 1. Module Code: EEE305J1. Module Title: MICROCONTROLLER SYSTEMS

Semester 1. Module Code: EEE305J1. Module Title: MICROCONTROLLER SYSTEMS UNIVERSITY OF ULSTER UNIVERSITY EXAMINATIONS : 2004/2005 Semester 1 Module Code: EEE305J1 Module Title: MICROCONTROLLER SYSTEMS Time allowed: 3 Hours Answer as many questions as you can. Not more than

More information

Application Note - PIC Source Code v1.1.doc

Application Note - PIC Source Code v1.1.doc Programmable, RGB-backlit LCD Keyswitches APPLICATION NOTE PIC SOURCE CODE 2004-2006 copyright [E³] Engstler Elektronik Entwicklung GmbH. All rights reserved. PIC Source Code The following Assembler source

More information