Please note this is an advanced topic. A Look Under the Hood at the Roco Crane Functions. See Macro Appendix M see Engine Profile

Transcription

1 A Look Under the Hood at the Roco Crane Functions See Macro Appendix M see Engine Profile To find out what each Roco Crane function does, click on any item above that is enclosed in a red box and you will be taken to the section that explains it all. Click on the option at the end of each section to return to this page Caution: Check that your crane has the same power on/reset defaults shown with the blue text and blue Flagman indicators by manually controlling the crane before using the above Train Window. Please note this is an advanced topic. 4

2 Engine Profile for the Roco Crane Profile Method I profiled the Roco Crane to get a threshold speed using the following procedure. I wired two pushbuttons to spare s88 contacts that I had, switching to Ground. With the boom raised I rotated the crane to set the threshold speed. Then with a pushbutton in each hand I started the profiling using momentary contacts. As the crane rotated 180 deg. I pushed the pushbutton that was at the boom end, the crane run-out ran a little further then the crane reversed after 4 seconds, as it became parallel to the wagon I pushed the same pushbutton again then waited for it to rotate 180 deg and pushed the other button that was at the boom end and repeated the process for all speed steps. Using my Roco Crane profile should be fine for testing. 5

3 Defaults/PWR Reset In the Assign Engine Functions the PWR Reset is a List item (see below). In the Operations Tab of the List the Roco Defaults On-Off Switch under Accessories is turned on. Flags and switch shown in an Off state Flags and switch shown in an On state Roco Defaults On-Off Switch For the Roco Defaults/Pwr Reset On-Off Switch in the Operations Tab all crane selection switches are turned To the Default Positions Required 6

4 Defaults/PWR Reset continued Roco Defaults Flagman Indicator Memory Tab Timer beginning when turning off is required for macro conditions testing. 7

5 Defaults/PWR Reset continued The Blue Flagman indicators show the default crane decoder settings and are only used for information. Roco Default Rotation (see above) Roco Default Forward (see above) Roco Default Rotate CW (see above) Roco Default Boom Up (see above) 8

6 Defaults/PWR Reset continued Roco Default Aux Off (see above) Caution: Check that your crane has the same power on/reset defaults shown with the blue text and blue Flagman indicators by manually controlling the crane before using the above Train Window. 9

7 Toggle Command (CMD) In the Assign Engine Functions the Toggle CMD is a Push Button with Decoder Number L/F0 Flags and Pushbutton shown in an Off state Flags and Pushbutton shown in an On state Roco Toggle Command F0 Push Button Important Note: - The F0 toggle command has to have a controlled On/Off period as this ensures the correct crane function (Rotate, Boom, Hook and Aux) is selected. The system response must have time to respond to this F0 (Lights Off) command. Macro s Roco x1, Roco x2 and Roco x3 control the time duration. Under normal circumstances the user shouldn t use this command at all as it is used as a visual confirmation that the F0 (Lights Off) command has been transmitted to the crane via the Toggle command On/Off flags associated to the Roco Crane Block. Roco F0 Toggle Cmd Off Flagman Indicator Operations Tab With the Operating State as shown and Train Operations selected, the Toggle CMD icon is added under Operations and the option is Off. 10

8 Toggle Command (CMD) continued Roco F0 Toggle Cmd On Flagman Indicator Operations Tab With the Operating State as shown and Train Operations selected, the Toggle CMD icon is added under Operations and the option is On. 11

9 Crane Direction Toggle Command Roco Direction Toggle Push Button Flags and Pushbutton shown in an Off state Flags and Pushbutton shown in an On state Important Note: - I controlled the Direction Toggle command in the same manner as the F0 Toggle Command to have a controlled On/Off period. Macro s Roco Dir Toggle x1, Roco Dir Toggle Aux x1 and Roco Dir Toggle CCW x1 control the time duration. Under normal circumstances the user shouldn t use this command at all as it is used as a visual confirmation that the Roco Crane has been toggled forward or reverse, transmitted via the Direction Toggle command flag associated to the Roco Crane Block. Roco Direction Toggle On Flagman Indicator 12

10 Roco Crane Block The flagman above are required to be associated with the block as they control the commands sent from the switchboard to the Roco Crane when the block is Reserved by the Roco Crane. The Stop Marker is only required to suppress warnings in the Messages window. The Roco Diorama Flagman Indicator is required to run a macro that can be started by the Roco Diorama Pushbutton or can also be started by the timetable. This option will be discussed later. Warning: - This option should only be used with extreme caution. 13

11 Boom Select Roco Crane Functions Tab Boom Select In the Assign Engine Functions the Boom Select is a List item (see below). In the Operations Tab of the List the Roco Boom Select On-Off Switch under Accessories is turned on. Flags and switch shown in an Off state Flags and switch shown in an On state Roco Boom Select On-Off Switch For the Roco Boom Select On-Off Switch in the Operations Tab all other crane selection switches are turned Off 14

12 Boom Select continued Roco Boom Select Off Flagman Indicator Memory Tab Timer beginning when turning off is required for macro conditions testing. 15

13 Boom Select continued Roco Boom Select On Flagman Indicator Operations Tab Roco x1, Roco x2 and Roco x3 are complex and you can follow the links for further explanation. Memory Tab Timer beginning when turning off is required for macro condition testing. 16

14 Boom Select continued Roco Boom Macro In the Operations Tab a Message Roco Boom is sent to the messages window which is used for debugging problems. In the Condition Tab, the macro will only execute when the checked flagman are true. 17

15 Rotate Select Roco Crane Functions Tab Rotate Select In the Assign Engine Functions the Rotate Select is a List item (see below). In the Operations Tab of the List the Roco Rotate Select On-Off Switch under Accessories is turned on. Flags and switch shown in an Off state Flags and switch shown in an On state Roco Rotate Select On-Off Switch For the Roco Rotate Select On-Off Switch in the Operations Tab all other crane selection switches are turned Off 18

16 Rotate Select continued Roco Rotate Select Off Flagman Indicator Memory Tab Timer beginning when turning off is required for macro conditions testing. 19

17 Rotate Select continued Roco Rotate Select On Flagman Indicator Operations Tab Roco x1, Roco x2 and Roco x3 are complex and you can follow the links for further explanation. Memory Tab Timer beginning when turning off is required for macro condition testing. 20

18 Rotate Select continued Roco Rotate Macro In the Operations Tab a Message Roco Rotate is sent to the messages window which is used for debugging problems. In the Condition Tab, the macro will only execute when the checked flagman are true. 21

19 Hook Select Roco Crane Functions Tab Hook Select In the Assign Engine Functions the Hook Select is a List item (see below). In the Operations Tab of the List the Roco Hook Select On-Off Switch under Accessories is turned on. Flags and switch shown in an Off state Flags and switch shown in an On state Roco Hook Select On-Off Switch For the Roco Hook Select On-Off Switch in the Operations Tab all other crane selection switches are turned Off 22

20 Hook Select continued Roco Hook Select Off Flagman Indicator Memory Tab Timer beginning when turning off is required for macro conditions testing. 23

21 Hook Select continued Roco Hook Select On Flagman Indicator Operations Tab Roco x1, Roco x2 and Roco x3 are complex and you can follow the links for further explanation. Memory Tab Timer beginning when turning off is required for macro condition testing. 24

22 Hook Select continued Roco Hook Macro In the Operations Tab a Message Roco Rotate is sent to the messages window which is used for debugging problems. In the Condition Tab, the macro will only execute when the checked flagman are true. 25

23 Magnet/Aux Select Roco Crane Functions Tab Aux Select In the Assign Engine Functions the Magnet/Aux Select is a List item (see below). In the Operations Tab of the List the Roco Aux Select On-Off Switch under Accessories is turned on. Flags and switch shown in an Off state Flags and switch shown in an On state Roco Aux Select On-Off Switch For the Roco Aux Select On-Off Switch in the Operations Tab all other crane selection switches are turned Off. 26

24 Magnet/Aux Select continued Roco Aux Select Off Flagman Indicator Operations Tab the Roco Aux Select On-Off Switch under Accessories is turned Off. Memory Tab Timer beginning when turning off is required for macro conditions testing. 27

25 Magnet/Aux Select continued Roco Aux Select On Flagman Indicator Operations Tab Roco x1, Roco x2 and Roco x3 are complex and you can follow the links for further explanation. Memory Tab Timer beginning when turning off is required for macro condition testing. 28

26 Magnet/Aux Select continued Roco Aux Macro In the Operations Tab a Message Roco Aux is sent to the messages window which is used for debugging problems. In the Condition Tab, the macro will only execute when the checked flagman are true. 29

27 Monitoring Crane Position Roco Rotation CCW/CW Toggle Switch Flags and switch shown in a CW position Flags and switch shown in a CCW position Roco Rotation CCW Flag Indicator Roco Rotation CW Flag Indicator 30

28 Monitoring Crane Position continued Roco Boom Down/Up Toggle Switch Flags and switch shown in an Up position Flags and switch shown in a Down position Roco Boom Down Flag Indicator Roco Boom Up Flag Indicator 31

29 Monitoring Crane Position continued Roco Hook Up/Down Toggle Switch Flags and switch shown in an Up position Flags and switch shown in a Down position Roco Hook Down Flag Indicator Roco Hook Up Flag Indicator 32

30 Monitoring Crane Position continued Roco Aux On/Off Toggle Switch Flags and switch shown in an Off position Flags and switch shown in an On position In the Condition Tab the aux/magnet can only be turn on when flagman Aux Select and Hook Dwn is true. Roco Aux Off Flag Indicator Roco Aux On Flag Indicator 33

31 Monitoring Crane Position continued Roco AuxOn Flag Indicators These two flagman indicators are required to monitor when the Aux/Magnet is On and which rotation CCW/CW is taking place. Roco AuxOn CCW Flags shown in a CCW rotation with Aux On on state Roco AuxOn CW Flags shown in a CW rotation with Aux On on state 34

32 Roco Crane Control Macro s Roco Boom Up Engine Function Roco Boom Up Macro Properties 35

33 Roco Crane Control Macro s continued Roco Boom Down Engine Function Roco Boom Down Macro Properties 36

34 Roco Crane Control Macro s continued Roco Rotation CW Engine Function Roco Rotate CW Macro Properties 37

35 Roco Crane Control Macro s continued Roco Rotation CCW Engine Function Roco Rotate CCW Macro Properties 38

36 Roco Crane Control Macro s continued Roco Hook Down Engine Function Roco Hook Down Macro Properties 39

37 Roco Crane Control Macro s continued Roco Hook Up Engine Function Roco Hook Up Macro Properties 40

38 Roco Crane Control Macro s continued Roco Aux On Engine Function Roco Aux On Macro Properties 41

39 Roco Crane Control Macro s continued Roco Aux Off Engine Function Roco Aux Off Macro Properties 42

40 Roco Crane Control Macro s continued Roco Selection Switches Position Counter Roco x1 Macro Properties 43

41 Roco Selection Switches Position Counter continued Roco x2 Macro Properties Roco x3 Macro Properties 44

42 Roco Crane Control Macro s continued Roco Dir Toggle x1 Macro Properties Roco Dir Toggle Aux x1 Macro Properties 45

43 Roco Crane Control Macro s continued Roco Dir Toggle CCW x1 Macro Properties 46

44 Roco Crane Control Macro s continued Macro Appendix M 47

45 Roco Crane Control Macro s continued Macro Appendix M 48

46 Bonus Time If you have the Roco Crane (Marklin Version) and would like to enter the information into your_layout.yrr I have outlined some procedures below. Warning: - Copying rms_roco_crane_ yrr will take an experienced user hours to complete. I know this because I copied the Roco Crane information to my friends *.yrr to prove that it could be done. Because this is an advanced topic the procedures below are an outline only of what you will have to do. TIP: - Copying data from one *.yrr file to another *.yrr file To do this process you must start another TrainController (you will have two TrainController s running) and resize both windows so they are side by side. rms_roco_crane_ yrr should be open in the left side TrainController and your_layout.yrr is open in the right TrainController. In the left TrainController window select the items required in a window then hit Ctrl + C to copy items. In the right TrainController LMC (left mouse click) the location you want to place the items and Hit Ctrl + V to paste items. Do another LMC away from any other item in the right TrainController to finally place the items in your_layout.yrr Copy Procedure Outline 1. Create a new Switchboard in your_layout.yrr named Function Cars. 2. Import the Engine named rms_roco_crane.yrl (supplied file) into your_layout.yrr. 3. Using New Explorer windows copy all macro s. Please note you won t get the complete macros but it is a good start to avoid typing errors and the structure AND/OR remains correct. 4. Copy all switchboard switches, flagman and text. 5. Check all switch properties and make any required changes. 6. Fix Blue Flagman to required switches and check all properties. 7. Fix Green and Yellow Flagman to required switches and check all properties. 8. Fix Red Flagman to required switches and check all properties. 9. Using the Block Editor delete all flags and reinsert the required Flagman for Block Roco Crane. 10. Correct all Roco macro s (see appendix M ) 11. Edit the Engine Roco Crane and fix list operations (accessories and macro s). 12. Enjoy controlling your Roco Crane with ease. As always enjoy your model trains. 49