Lecture 3 MIPS ISA and Performance
|
|
- Jack Chapman
- 5 years ago
- Views:
Transcription
1 Lecture 3 MIPS ISA and Performance Peng Liu liupeng@zju.edu.cn 1
2 MIPS Instruction Encoding MIPS instructions are encoded in different forms, depending upon the arguments R-format, I-format, J-format MIPS architecture has three instruction formats, all 32 bits in length Regularity is simpler and improves performance A 6-bit opcode appears at the beginning of each instruction Control logic based on decode instruction type 2
3 Instruction Formats I-format: used for instructions with immediates, lw and sw (since the offset counts as an immediate), and the branches (beq and bne), (but not the shift instructions; later) J-format: used for j and jal R-format: used for all other instructions It will soon become clear why the instructions have been partitioned in this way. 3
4 I-Format 4
5 I-Format Example 5
6 I-Format Example: Load/Store 6
7 J-Format (1/2) Define fields of the following number of bits each: 6 bits 26 bits As usual, each field has a name: opcode target address Key Concepts Keep opcode field identical to R-format and I-format for consistency. Combine all other fields to make room for large target address. 7
8 J-Format (2/2) Summary: New PC = { PC[31..28], target address, 00 } Understand where each part came from! Note: In Verilog, {,, } means concatenation { 4 bits, 26 bits, 2 bits } = 32-bit address { 1010, , 00 } = We use Verilog in this class 8
9 R-Format (1/2) Define fields of the following number of bits each: = For simplicity, each field has a name: opcode rs rt rd shamt funct 9
10 R-Format (2/2) More fields: rs (Source Register): generally used to specify register containing first operand rt (Target Register): generally used to specify register containing second operand (note that name is misleading) rd (Destination Register): generally used to specify register which will receive result of computation 10
11 R-Format Example MIPS Instruction: add $8,$9,$10 Decimal number per field representation: Binary number per field representation: hex representation: decimal representation: 012A 4020 hex 19,546,144 ten hex 11
12 MIPS-32 Operation Overview Arithmetic Logical: Add, AddU, Sub, SubU, And, Or, Xor, Nor, SLT, SLTU AddI, AddIU, SLTI, SLTIU, AndI, OrI, XorI, LUI SLL, SRL, SRA, SLLV, SRLV, SRAV Memory Access: LB, LBU, LH, LHU, LW, LWL, LWR SB, SH, SW, SWL, SWR 12
13 MIPS logical instructions Instruction Example Meaning Comment and and $1,$2,$3 $1 = $2 & $3 3 reg. operands; Logical AND or or $1,$2,$3 $1 = $2 $3 3 reg. operands; Logical OR xor xor $1,$2,$3 $1 = $2 ^ $3 3 reg. operands; Logical XOR nor nor $1,$2,$3 $1 = ~($2 $3) 3 reg. operands; Logical NOR and immediate andi $1,$2,10 $1 = $2 & 10 Logical AND reg, constant or immediate ori $1,$2,10 $1 = $2 10 Logical OR reg, constant xor immediate xori $1, $2,10 $1 = ~$2 &~10 Logical XOR reg, constant shift left logical sll $1,$2,10 $1 = $2 << 10 Shift left by constant shift right logical srl $1,$2,10 $1 = $2 >> 10 Shift right by constant shift right arithm. sra $1,$2,10 $1 = $2 >> 10 Shift right (sign extend) shift left logical sllv $1,$2,$3 $1 = $2 << $3 Shift left by variable shift right logical srlv $1,$2, $3 $1 = $2 >> $3 Shift right by variable shift right arithm. srav $1,$2, $3 $1 = $2 >> $3 Shift right arith. by variable Q: Can some multiply by 2 i? Divide by 2 i? Invert? 13
14 MIPS Reference Data: CORE INSTRUCTION SET (1) NAME MNE- MON-IC FOR- MAT OPERATION (in Verilog) OPCODE/FU NCT (hex) Add add R R[rd] = R[rs] + R[rt] (1) 0 / 20 hex Add Immediate addi I R[rt] = R[rs] + SignExtImm (1)(2) 8 hex Branch On Equal beq I if(r[rs]==r[rt]) PC=PC+4+ BranchAddr (4) 4 hex (1) May cause overflow exception (2) SignExtImm = { 16{immediate[15]}, immediate } (3) ZeroExtImm = { 16{1b 0}, immediate } (4) BranchAddr = { 14{immediate[15]}, immediate, 2 b0} 14
15 MIPS Data Transfer Instructions Instruction Comment sw 500($4), $3 Store word sh 502($2), $3 Store half word sb 41($3), $2 Store byte lw $1, 30($2) lh $1, 40($3) lhu $1, 40($3) lb $1, 40($3) lbu $1, 40($3) Load word Load halfword Load halfword unsigned Load byte Load byte unsigned lui $1, 40 Load Upper Immediate (16 bits shifted left by 16) Q: Why need lui? LUI R5 R
16 Multiply / Divide Start multiply, divide MULT rs, rt MULTU rs, rt DIV rs, rt DIVU rs, rt Move result from multiply, divide MFHI rd MFLO rd Move to HI or LO MTHI rd MTLO rd Registers HI LO 16
17 MIPS Arithmetic Instructions Instruction Example Meaning Comments add add $1,$2,$3 $1 = $2 + $3 3 operands; exception possible subtract sub $1,$2,$3 $1 = $2 $3 3 operands; exception possible add immediate addi $1,$2,100 $1 = $ constant; exception possible add unsigned addu $1,$2,$3 $1 = $2 + $3 3 operands; no exceptions subtract unsigned subu $1,$2,$3 $1 = $2 $3 3 operands; no exceptions add imm. unsign. addiu $1,$2,100 $1 = $ constant; no exceptions multiply mult $2,$3 Hi, Lo = $2 x $3 64-bit signed product multiply unsigned multu$2,$3 Hi, Lo = $2 x $3 64-bit unsigned product divide div $2,$3 Lo = $2 $3, Lo = quotient, Hi = remainder Hi = $2 mod $3 divide unsigned divu $2,$3 Lo = $2 $3, Unsigned quotient & remainder Hi = $2 mod $3 Move from Hi mfhi $1 $1 = Hi Used to get copy of Hi Move from Lo mflo $1 $1 = Lo Used to get copy of Lo Q: Which add for address arithmetic? Which add for integers? 17
18 Green Card: ARITHMETIC CORE INSTRUCTION SET (2) NAME MNE- MON-IC FOR- MAT OPERATION (in Verilog) OPCODE/FMT / FT/ FUNCT (hex) Branch On FP True bc1t FI if (FPcond) PC=PC BranchAddr (4) 11/8/1/-- Load FP Single lwc1 I F[rt] = M[R[rs] + SignExtImm] (2) 11/8/1/-- Divide div R Lo=R[rs]/R[rt]; Hi=R[rs]%R[rt] 31/--/--/-- 18
19 When does MIPS Sign Extend? When value is sign extended, copy upper bit to full value: Examples of sign extending 8 bits to 16 bits: When is an immediate operand sign extended? Arithmetic instructions (add, sub, etc.) always sign extend immediates even for the unsigned versions of the instructions! Logical instructions do not sign extend immediates (They are zero extended) Load/Store address computations always sign extend immediates Multiply/Divide have no immediate operands however: unsigned treat operands as unsigned The data loaded by the instructions lb and lh are extended as follows ( unsigned don t extend): lbu, lhu are zero extended lb, lh are sign extended Q: Then what is does add unsigned (addu) mean since not immediate? 19
20 MIPS Compare and Branch Compare and Branch BEQ rs, rt, offset if R[rs] == R[rt] then PC-relative branch BNE rs, rt, offset <> Compare to zero and Branch BLEZ rs, offset if R[rs] <= 0 then PC-relative branch BGTZ rs, offset > BLT < BGEZ >= BLTZAL rs, offset if R[rs] < 0 then branch and link (into R 31) BGEZAL >=! Remaining set of compare and branch ops take two instructions Almost all comparisons are against zero! 20
21 MIPS jump, branch, compare Instructions Instruction Example Meaning branch on equal beq $1,$2,100 if ($1 == $2) go to PC Equal test; PC relative branch branch on not eq. bne $1,$2,100 if ($1!= $2) go to PC Not equal test; PC relative set on less than slt $1,$2,$3 if ($2 < $3) $1=1; else $1=0 Compare less than; 2 s comp. set less than imm. slti $1,$2,100 if ($2 < 100) $1=1; else $1=0 Compare < constant; 2 s comp. set less than uns. sltu $1,$2,$3 if ($2 < $3) $1=1; else $1=0 Compare less than; natural numbers set l. t. imm. uns. sltiu $1,$2,100 if ($2 < 100) $1=1; else $1=0 Compare < constant; natural numbers jump j go to Jump to target address jump register jr $31 go to $31 For switch, procedure return jump and link jal $31 = PC + 4; go to For procedure call 21
22 MIPS Assembler Register Convention Name Number Usage Preserved across a call? $zero 0 the value 0 n/a $v0-$v1 2-3 return values no $a0-$a3 4-7 arguments no $t0-$t temporaries no $s0-$s saved yes $t18-$t temporaries no $sp 29 stack pointer yes $ra 31 return address yes caller saved callee saved 22
23 Green Card: OPCODES, BASE CONVERSION, ASCII (3) MIPS opcode (31:26) (1) MIPS funct (5:0) (2) MIPS funct (5:0) Binary Decimal Hexadeci-mal ASCII (1) sll add.f NUL j srl mul.f STX lui sync floor.w.f f SI lbu and cvt.w.f $ (1) opcode(31:26) == 0 (2) opcode(31:26) == 17 ten (11 hex ); if fmt(25:21)==16 ten (10 hex ) f = s (single); if fmt(25:21)==17 ten (11 hex ) f = d (double) Note: 3-in-1 - Opcodes, base conversion, ASCII! 23
24 Branch & Pipelines Time li $3, #7 sub $4, $4, 1 execute ifetch execute bz $4, LL ifetch execute Branch addi $5, $3, 1 ifetch execute Delay Slot LL: slt $1, $3, $5 Branch Target ifetch execute By the end of Branch instruction, the CPU knows whether or not the branch will take place. However, it will have fetched the next instruction by then, regardless of whether or not a branch will be taken. Why not execute it? 24
25 Delayed Branches li $3, #7 sub $4, $4, 1 bz $4, LL addi $5, $3, 1 subi $6, $6, 2 LL: slt $1, $3, $5 In the Raw MIPS, the instruction after the branch is executed even when the branch is taken This is hidden by the assembler for the MIPS virtual machine allows the compiler to better utilize the instruction pipeline (???) Jump and link (jal inst): Put the return addr. Into link register ($31): PC+4 (logical architecture) PC+8 physical ( Raw ) architecture delay slot executed Then jump to destination address Delay Slot Instruction 25
26 Filling Delayed Branches Branch: Inst Fetch Dcd & Op Fetch Execute execute successor even if branch taken! Then branch target or continue Inst Fetch Dcd & Op Fetch Inst Fetch Execute Single delay slot impacts the critical path Compiler can fill a single delay slot with a useful instruction 50% of the time. try to move down from above jump move up from target, if safe add $3, $1, $2 sub $4, $4, 1 bz $4, LL NOP... LL: add rd,... Is this violating the ISA abstraction? 26
27 Summary: Salient features of MIPS I 32-bit fixed format inst (3 formats) bit GPR (R0 contains zero) and 32 FP registers (and HI LO) partitioned by software convention 3-address, reg-reg arithmetic instr. Single address mode for load/store: base+displacement no indirection, scaled 16-bit immediate plus LUI Simple branch conditions compare against zero or two registers for =, no integer condition codes Delayed branch execute instruction after a branch (or jump) even if the branch is taken (Compiler can fill a delayed branch with useful work about 50% of the time) 27
28 And in Conclusion... Continued rapid improvement in Computing 2X every 1.5 years in processor speed; every 2.0 years in memory size; every 1.0 year in disk capacity; Moore s Law enables processor, memory (2X transistors/chip/ ~1.5 ro 2.0 yrs) 5 classic components of all computers Control Datapath Memory Input Output Processor 28
29 MIPS Machine Instruction Review: Instruction Format Summary 29
30 Addressing Modes Summary Register addressing Operand is a register (e.g. ALU) Base/displacement addressing (ex. load/store) Operand is at the memory location that is the sum of a base register + a constant Immediate addressing (e.g. constants) Operand is a constant within the instruction itself PC-relative addressing (e.g. branch) Address is the sum of PC and constant in instruction (e.g. branch) Pseudo-direct addressing (e.g. jump) Target address is concatenation of field in instruction and the PC 30
31 Addressing Modes Summary 31
32 Computer Performance Metrics Response Time (latency) How long does it take for my job to run? How long does it take to execute a job? How long must I wait for the database query? Throughput How many jobs can the machine run at once? What is the average execution rate? How many queries per minute? If we upgrade a machine with a new processor what to we increase? If we add a new machine to the lab what do we increase? 32
33 Performance = Execution Time Elapsed Time Counts everything (disk and memory accesses, I/O, etc.) A useful number, but often not good for comparison purposes E.g., OS & multiprogramming time make it difficult to compare CPUs CPU time (CPU = Central Processing Unit = processor) Doesn t count I/O or time spent running other programs Can be broken up into system time, and user time Our focus: user CPU time Time spent executing the lines of code that are in our program Includes arithmetic, memory, and control instructions, 33
34 Clock Cycles Instead of reporting execution time in seconds, we often use cycles Clock ticks indicate when to start activities Cycle time = time between ticks = seconds per cycle Clock rate (frequency) = cycles per second (1Hz = 1 cycle/sec) A 2 GHz clock has a 500 picoseconds (ps) cycle time. 34
35 Performance and Execution Time The program should be something real people care about Desktop: MS office, edit, compile Server: web, e-commerce, database Scientific: physics, weather forecasting 35
36 Measuring Clock Cycles Clock cycles/program is not an intuitive or easily determined value, so Clock Cycles = Instructions x Clock Cycles Per Instruction Cycles Per Instruction (CPI) used often CPI is an average since the number of cycles per instruction varies from instruction to instruction Average depends on instruction mix, latency of each inst. Type etc. CPIs can be used to compare two implementations of the same ISA, but is not useful alone for comparing different ISAs An X86 add is different from a MIPS add 36
37 Using CPI Drawing on the previous equation: ExecutionTime Instructions CPI ClockCycleTime ExecutionTime Instructions CPI ClockRate To improve performance (i.e. reduce execution time) Increase clock rate (decrease clock cycle time) OR Decrease CPI OR Reduce the number of instructions Designers balance cycle time against the number of cycles required Improving one factor may make the other one worse 37
38 Clock Rate Performance Mobile Intel Pentium 4 Vs Intel Pentium M 2.4 GHz 1.6 GHz P4 is 50% faster? Performance on Mobilemark with same memory and disk Word, excel, photoshop, powerpoint, etc. Mobile Pentium 4 is only 15% faster What is the relative CPI? ExecTime = ICxCPI/ClockRate ICxCPI M /1.6 = 1.15xICxCPI 4 /2.4 CPI 4 /CPI M = 2.4/(1.15x1.6) =
39 CPI Calculation Different instruction types require different numbers of cycles CPI is often reported for types of instructions ClockCylces ( CPI IC ) n i 1 i i where CPI i is the CPI for the type of instructions and IC i is the count of that type of instruction 39
40 CPI Calculation To compute the overall average CPI use ClockCylces n i 1 CPI i InstructionCount InstructionCount i 40
41 Computing CPI Example Given this machine, the CPI is the sum of CPI x Frequency Average CPI is = 1.5 What fraction of the time for data transfer? 41
42 What is the Impact of Displacement Based Memory Addressing Mode? Assume 50% of MIPS loads and stores have a zero displacement. 42
43 Speedup Speedup allows us to compare different CPUs or optimizations Speedup CPUtimeOld CPUtimeNew Example Original CPU takes 2sec to run a program New CPU takes 1.5sec to run a program Speedup = or speedup or 33% 43
44 Amdahl s Law If an optimization improves a fraction f of execution time by a factor of a Speedup Told 1 [(1 f ) f / a]* Told (1 f ) f / a This formula is known as Amdahl s Law Lessons from If f->100%, then speedup = a If a->, the speedup = 1/(1-f) Summary Make the common case fast Watch out for the non-optimized component 44
45 Evaluating Performance Performance best determined by running a real application Use programs typical of expected workload e.g. compiler/editors, scientific applications, graphics, etc. Microbenchmarks Small programs, synthetic or kernels from larger applications Nice for architects and designers Can be misleading Benchmarks Collection of real programs that companies have agreed on Components: programs, inputs & outputs, measurements rules, metrics Can still be abused 45
46 The SPEC CPU Benchmark Suite (System Performance Evaluation Cooperative) 46
47 Benchmarks System Performance Evaluation Cooperative (SPEC) Scientific computing: Linpack, SpecOMP, SpecHPC, Embedded benchmarks: EEMBC, Dhrystone, Enterprise computing TPC-C, TPC-W, TPC-H SpecJbb, SpecSFS, SpecMail, Streams, Multiprocessor: PARSEC, SPLASH-2, EEMBC (multicore) Other 3Dmark, ScienceMark, Winstone, ibench, AquaMark, Watch out: your results will be as good as your benchmarks Make sure you know what the benchmark is designed to measure Performance is not the only metric for computing systems Cost, power consumption, reliability, real-time performance, 48
48 Summarizing Performance Combining results from multiple programs into 1 benchmark score Sometimes misleading, always controversial, and inevitable We all like quoting a single number 1 n i i AM Weight Time n i i 3 types of means Arithmetic: for times Harmonic: for rates Geometric: for rations HM GM n i 1 n i 1 n Weight Rate Ratio i i i 1 n 49
49 Arithmetic mean: Using the Means When you have individual performance scores in latency Harmonic mean: When you have individual performance scores in throughput Geometric mean: Nice property: GM(X/Y)= GM(X)/GM(Y) But difficult to related back to execution times Note Always look at the results for individual programs 50
50 Performance Summary Performance is specific to a particular programs Total execution time is a consistent summary of performance For a given architecture performance increases come from: Increase in clock rate (without adverse CPI effects) Improvements in processor organization that lower CPI Compiler enhancements that lower CPI and/or instruction count Algorithm/Language choices that affect instruction count Pitfall: expecting improvement in one aspect of a machine s performance to affect the total performance 51
51 Translation Hierarchy High-level->Assembly->Machine 52
52 Compiler Converts High-level Language to Machine Code 53
53 Optimizing Compilers Provide efficient mapping of program to machine Code selection and ordering Eliminating minor inefficiencies Register allocation Don t (usually) improve asymptotic efficiency Up to programmer to select best overall algorithm Big-O savings are (often) more important than constant factors But constant factors also matter Optimization types Local: inside basic blocks Global: across basic blocks e.g. loops 55
54 Limitations of Optimizing Compilers Operate Under Fundamental Constraints Improved code has same output Improved code has same side effects Improved code is as correct as original code Most analysis is performed only within procedures Whole-program analysis is too expensive in most cases Most analysis is based only on static information Compiler has difficulty anticipating run-time inputs Profile driven dynamic compilation becoming more prevalent Dynamic compilation (e.g. Java JIT) When in doubt, the compiler must be conservative 56
55 Preview: Code Optimization Goal: Improve performance by: Removing redundant work Unreachable code Common-subexpression elimination Induction variable elimination Using simpler and faster operations Dealing with constants in the compiler Strength reduction Managing register well ExecutionTime = Instructions x CPI x ClockCycleTime 57
56 Constant Folding Detect & combine values that will be constant. Respect laws of arithmetic on target machine. a = 10 * b; 58
57 Register Allocation & Assignment Register provide fastest data access in the processor. Two terms: What variables belong in register? (allocation) What register will hold this value? (assignment) Once a value is in a register, we d like not to spill & restore it to use same value again. 66
58 Assembly Code Generation 67
59 Assembler Expands macros and pseudo instructions as well as converts constants. Primary purpose is to produce an object file Machine language instructions Application data Information for memory organization 69
60 Object File 70
61 Linker Linker combines multiple object modules Identify where code/data will be placed in memory Resolve code/data cross references Produces executable if all references found Steps Place code and data modules in memory Determine the address of data and instruction labels Patch both the internal and external references Separation between compiler and linker makes standard libraries and efficient solution to maintaining modular code. 71
62 Loader used at run-time Loader Reads executable file header for size of text/data segments Create address space sufficiently large Copy program from executable on disk into memory Copy arguments to main program s stack Initialize machine registers and set stack pointer Jump to start-up routine Terminate program when execution completes 72
63 SPIM System Calls SPIM provides a small number of OS system calls Service Code Argument Result print_int 1 $a0 = integer print_float 2 $f12 = float print_double 3 $f12 = double print_string 4 $a0 = string read_int 5 Integer in $v0 read_float 6 Float if $f0 read_double 7 Double in $f0 read_string 8 $a0 = buffer, $a1 = length Data in buffer Sbrk 9 $a0 = amount Address in $v0 Exit 10 Set system call code in $v0 and pass arguments as needed li $v0, 1 # set system call to print_int li $a0, 12 # load constant 12 systcall See web site for details and examples. 73
64 MIPS Assembler Directives SPIM supports a subset of the MIPS assembler directives Some of the directives include.asciiz Store a null-terminated string in memory.data Start of data segment.global Identify an exported symbol.text Start of text segment.word Store words in memory 74
65 HW1 Homework 教学工作 Check the following web 75
66 Acknowledgements These slides contain material from courses: UCB CS152 Stanford EE108B 76
Computer Organization & Design
Computer Organization & Design Peng Liu ( 刘鹏 ) College of Information Science & Electronic Engineering Zhejiang University, Hangzhou 310027, China liupeng@zju.edu.cn Lecture 2 MIPS Instruction Set Architecture
More informationComputer Architecture. The Language of the Machine
Computer Architecture The Language of the Machine Instruction Sets Basic ISA Classes, Addressing, Format Administrative Matters Operations, Branching, Calling conventions Break Organization All computers
More informationDigital System Design II
Digital System Design II 数字系统设计 II Peng Liu ( 刘鹏 ) Dept. of Info. Sci. & Elec. Engg. Zhejiang University liupeng@zju.edu.cn Lecture 2 MIPS Instruction Set Architecture 2 Textbook reading MIPS ISA 2.1-2.4
More informationEEM 486: Computer Architecture. Lecture 2. MIPS Instruction Set Architecture
EEM 486: Computer Architecture Lecture 2 MIPS Instruction Set Architecture EEM 486 Overview Instruction Representation Big idea: stored program consequences of stored program Instructions as numbers Instruction
More informationEE108B Lecture 6. Performance and Compilers. Christos Kozyrakis Stanford University
EE108B Lecture 6 Performance and Compilers Christos Kozyrakis Stanford University http://eeclass.stanford.edu/ee108b 1 Announcements TBD 2 CPU Execution Time CPU Execution Time Execution Time= Instructions
More informationThe MIPS Instruction Set Architecture
The MIPS Set Architecture CPS 14 Lecture 5 Today s Lecture Admin HW #1 is due HW #2 assigned Outline Review A specific ISA, we ll use it throughout semester, very similar to the NiosII ISA (we will use
More informationReduced Instruction Set Computer (RISC)
Reduced Instruction Set Computer (RISC) Focuses on reducing the number and complexity of instructions of the ISA. RISC Goals RISC: Simplify ISA Simplify CPU Design Better CPU Performance Motivated by simplifying
More informationMIPS Reference Guide
MIPS Reference Guide Free at PushingButtons.net 2 Table of Contents I. Data Registers 3 II. Instruction Register Formats 4 III. MIPS Instruction Set 5 IV. MIPS Instruction Set (Extended) 6 V. SPIM Programming
More informationReduced Instruction Set Computer (RISC)
Reduced Instruction Set Computer (RISC) Reduced Instruction Set Computer (RISC) Focuses on reducing the number and complexity of instructions of the machine. Reduced number of cycles needed per instruction.
More informationMIPS Instruction Set
MIPS Instruction Set Prof. James L. Frankel Harvard University Version of 7:12 PM 3-Apr-2018 Copyright 2018, 2017, 2016, 201 James L. Frankel. All rights reserved. CPU Overview CPU is an acronym for Central
More informationSPIM Instruction Set
SPIM Instruction Set This document gives an overview of the more common instructions used in the SPIM simulator. Overview The SPIM simulator implements the full MIPS instruction set, as well as a large
More informationComputer Architecture. MIPS Instruction Set Architecture
Computer Architecture MIPS Instruction Set Architecture Instruction Set Architecture An Abstract Data Type Objects Registers & Memory Operations Instructions Goal of Instruction Set Architecture Design
More informationMIPS Assembly Language. Today s Lecture
MIPS Assembly Language Computer Science 104 Lecture 6 Homework #2 Midterm I Feb 22 (in class closed book) Outline Assembly Programming Reading Chapter 2, Appendix B Today s Lecture 2 Review: A Program
More informationToday s Lecture. MIPS Assembly Language. Review: What Must be Specified? Review: A Program. Review: MIPS Instruction Formats
Today s Lecture Homework #2 Midterm I Feb 22 (in class closed book) MIPS Assembly Language Computer Science 14 Lecture 6 Outline Assembly Programming Reading Chapter 2, Appendix B 2 Review: A Program Review:
More informationECE232: Hardware Organization and Design. Computer Organization - Previously covered
ECE232: Hardware Organization and Design Part 6: MIPS Instructions II http://www.ecs.umass.edu/ece/ece232/ Adapted from Computer Organization and Design, Patterson & Hennessy, UCB Computer Organization
More informationCS152 Computer Architecture and Engineering. Lecture 1 CS 152 Introduction & MIPS Review John Lazzaro. Dave Patterson
CS152 Computer Architecture and Engineering Lecture 1 CS 152 Introduction & MIPS Review 2004-08-31 John Lazzaro (www.cs.berkeley.edu/~lazzaro) Dave Patterson (www.cs.berkeley.edu/~patterson) www-inst.eecs.berkeley.edu/~cs152/
More informationCS 4200/5200 Computer Architecture I
CS 4200/5200 Computer Architecture I MIPS Instruction Set Architecture Dr. Xiaobo Zhou Department of Computer Science CS420/520 Lec3.1 UC. Colorado Springs Adapted from UCB97 & UCB03 Review: Organizational
More informationCISC 662 Graduate Computer Architecture. Lecture 4 - ISA MIPS ISA. In a CPU. (vonneumann) Processor Organization
CISC 662 Graduate Computer Architecture Lecture 4 - ISA MIPS ISA Michela Taufer http://www.cis.udel.edu/~taufer/courses Powerpoint Lecture Notes from John Hennessy and David Patterson s: Computer Architecture,
More informationCISC 662 Graduate Computer Architecture. Lecture 4 - ISA
CISC 662 Graduate Computer Architecture Lecture 4 - ISA Michela Taufer http://www.cis.udel.edu/~taufer/courses Powerpoint Lecture Notes from John Hennessy and David Patterson s: Computer Architecture,
More informationsoftware hardware Which is easier to change/design???
CS152 Computer Architecture and Engineering Lecture 2 Review of MIPS ISA and Performance January 27, 2003 John Kubiatowicz (http.cs.berkeley.edu/~kubitron) lecture slides: http://inst.eecs.berkeley.edu/~cs152/
More informationMIPS ISA. 1. Data and Address Size 8-, 16-, 32-, 64-bit 2. Which instructions does the processor support
Components of an ISA EE 357 Unit 11 MIPS ISA 1. Data and Address Size 8-, 16-, 32-, 64-bit 2. Which instructions does the processor support SUBtract instruc. vs. NEGate + ADD instrucs. 3. Registers accessible
More information101 Assembly. ENGR 3410 Computer Architecture Mark L. Chang Fall 2009
101 Assembly ENGR 3410 Computer Architecture Mark L. Chang Fall 2009 What is assembly? 79 Why are we learning assembly now? 80 Assembly Language Readings: Chapter 2 (2.1-2.6, 2.8, 2.9, 2.13, 2.15), Appendix
More informationMIPS Instruction Format
MIPS Instruction Format MIPS uses a 32-bit fixed-length instruction format. only three different instruction word formats: There are Register format Op-code Rs Rt Rd Function code 000000 sssss ttttt ddddd
More informationMark Redekopp, All rights reserved. EE 357 Unit 11 MIPS ISA
EE 357 Unit 11 MIPS ISA Components of an ISA 1. Data and Address Size 8-, 16-, 32-, 64-bit 2. Which instructions does the processor support SUBtract instruc. vs. NEGate + ADD instrucs. 3. Registers accessible
More informationF. Appendix 6 MIPS Instruction Reference
F. Appendix 6 MIPS Instruction Reference Note: ALL immediate values should be sign extended. Exception: For logical operations immediate values should be zero extended. After extensions, you treat them
More informationMIPS Instruction Reference
Page 1 of 9 MIPS Instruction Reference This is a description of the MIPS instruction set, their meanings, syntax, semantics, and bit encodings. The syntax given for each instruction refers to the assembly
More informationOverview. Introduction to the MIPS ISA. MIPS ISA Overview. Overview (2)
Introduction to the MIPS ISA Overview Remember that the machine only understands very basic instructions (machine instructions) It is the compiler s job to translate your high-level (e.g. C program) into
More information5/17/2012. Recap from Last Time. CSE 2021: Computer Organization. The RISC Philosophy. Levels of Programming. Stored Program Computers
CSE 2021: Computer Organization Recap from Last Time load from disk High-Level Program Lecture-2 Code Translation-1 Registers, Arithmetic, logical, jump, and branch instructions MIPS to machine language
More informationM2 Instruction Set Architecture
M2 Instruction Set Architecture Module Outline Addressing modes. Instruction classes. MIPS-I ISA. High level languages, Assembly languages and object code. Translating and starting a program. Subroutine
More informationRecap from Last Time. CSE 2021: Computer Organization. Levels of Programming. The RISC Philosophy 5/19/2011
CSE 2021: Computer Organization Recap from Last Time load from disk High-Level Program Lecture-3 Code Translation-1 Registers, Arithmetic, logical, jump, and branch instructions MIPS to machine language
More informationReview: Organization. CS152 Computer Architecture and Engineering Lecture 2. Review of MIPS ISA and Design Concepts
Review: Organization Processor Input CS52 Computer Architecture and Engineering Lecture 2 Control Review of MIPS ISA and Design Concepts path Output January 26, 24 John Kubiatowicz (http.cs.berkeley.edu/~kubitron)
More informationCPU Performance. Christos Kozyrakis. Stanford University C. Kozyrakis EE108b Lecture 5
EE108B Lecture 5 CPU Performance Christos Kozyrakis Stanford University http://eeclass.stanford.edu/ee108b 1 Announcements Upcoming deadlines HW1 due on Tuesday 1/25 Lab1 due on Tuesday 1/30 PA1 due on
More informationLecture 2. Instructions: Language of the Computer (Chapter 2 of the textbook)
Lecture 2 Instructions: Language of the Computer (Chapter 2 of the textbook) Instructions: tell computers what to do Chapter 2 Instructions: Language of the Computer 2 Introduction Chapter 2.1 Chapter
More informationEE108B Lecture 3. MIPS Assembly Language II
EE108B Lecture 3 MIPS Assembly Language II Christos Kozyrakis Stanford University http://eeclass.stanford.edu/ee108b 1 Announcements Urgent: sign up at EEclass and say if you are taking 3 or 4 units Homework
More informationInstructions: MIPS ISA. Chapter 2 Instructions: Language of the Computer 1
Instructions: MIPS ISA Chapter 2 Instructions: Language of the Computer 1 PH Chapter 2 Pt A Instructions: MIPS ISA Based on Text: Patterson Henessey Publisher: Morgan Kaufmann Edited by Y.K. Malaiya for
More informationProcessor. Han Wang CS3410, Spring 2012 Computer Science Cornell University. See P&H Chapter , 4.1 4
Processor Han Wang CS3410, Spring 2012 Computer Science Cornell University See P&H Chapter 2.16 20, 4.1 4 Announcements Project 1 Available Design Document due in one week. Final Design due in three weeks.
More informationECE468 Computer Organization & Architecture. MIPS Instruction Set Architecture
ECE468 Computer Organization & Architecture MIPS Instruction Set Architecture ECE468 Lec4.1 MIPS R2000 / R3000 Registers 32-bit machine --> Programmable storage 2^32 x bytes 31 x 32-bit GPRs (R0 = 0) 32
More informationECE 2035 Programming HW/SW Systems Fall problems, 7 pages Exam Two 23 October 2013
Instructions: This is a closed book, closed note exam. Calculators are not permitted. If you have a question, raise your hand and I will come to you. Please work the exam in pencil and do not separate
More informationReview. Lecture #9 MIPS Logical & Shift Ops, and Instruction Representation I Logical Operators (1/3) Bitwise Operations
CS6C L9 MIPS Logical & Shift Ops, and Instruction Representation I () inst.eecs.berkeley.edu/~cs6c CS6C : Machine Structures Lecture #9 MIPS Logical & Shift Ops, and Instruction Representation I 25-9-28
More informationComputer Architecture
CS3350B Computer Architecture Winter 2015 Lecture 4.2: MIPS ISA -- Instruction Representation Marc Moreno Maza www.csd.uwo.ca/courses/cs3350b [Adapted from lectures on Computer Organization and Design,
More informationQuestion 0. Do not turn this page until you have received the signal to start. (Please fill out the identification section above) Good Luck!
CSC B58 Winter 2017 Final Examination Duration 2 hours and 50 minutes Aids allowed: none Last Name: Student Number: UTORid: First Name: Question 0. [1 mark] Read and follow all instructions on this page,
More informationKernel Registers 0 1. Global Data Pointer. Stack Pointer. Frame Pointer. Return Address.
The MIPS Register Set The MIPS R2000 CPU has 32 registers. 31 of these are general-purpose registers that can be used in any of the instructions. The last one, denoted register zero, is defined to contain
More informationCS 351 Exam 2 Mon. 11/2/2015
CS 351 Exam 2 Mon. 11/2/2015 Name: Rules and Hints The MIPS cheat sheet and datapath diagram are attached at the end of this exam for your reference. You may use one handwritten 8.5 11 cheat sheet (front
More informationMIPS%Assembly% E155%
MIPS%Assembly% E155% Outline MIPS Architecture ISA Instruction types Machine codes Procedure call Stack 2 The MIPS Register Set Name Register Number Usage $0 0 the constant value 0 $at 1 assembler temporary
More informationInstruction Set Architecture of. MIPS Processor. MIPS Processor. MIPS Registers (continued) MIPS Registers
CSE 675.02: Introduction to Computer Architecture MIPS Processor Memory Instruction Set Architecture of MIPS Processor CPU Arithmetic Logic unit Registers $0 $31 Multiply divide Coprocessor 1 (FPU) Registers
More informationCS/COE1541: Introduction to Computer Architecture
CS/COE1541: Introduction to Computer Architecture Dept. of Computer Science University of Pittsburgh http://www.cs.pitt.edu/~melhem/courses/1541p/index.html 1 Computer Architecture? Application pull Operating
More informationIntroduction to the MIPS. Lecture for CPSC 5155 Edward Bosworth, Ph.D. Computer Science Department Columbus State University
Introduction to the MIPS Lecture for CPSC 5155 Edward Bosworth, Ph.D. Computer Science Department Columbus State University Introduction to the MIPS The Microprocessor without Interlocked Pipeline Stages
More informationCOMPSCI 313 S Computer Organization. 7 MIPS Instruction Set
COMPSCI 313 S2 2018 Computer Organization 7 MIPS Instruction Set Agenda & Reading MIPS instruction set MIPS I-format instructions MIPS R-format instructions 2 7.1 MIPS Instruction Set MIPS Instruction
More informationECE 331 Hardware Organization and Design. Professor Jay Taneja UMass ECE - Discussion 3 2/8/2018
ECE 331 Hardware Organization and Design Professor Jay Taneja UMass ECE - jtaneja@umass.edu Discussion 3 2/8/2018 Study Jams Leader: Chris Bartoli Tuesday 5:30-6:45pm Elab 325 Wednesday 8:30-9:45pm Elab
More informationAnne Bracy CS 3410 Computer Science Cornell University. See P&H Chapter: , , Appendix B
Anne Bracy CS 3410 Computer Science Cornell University The slides are the product of many rounds of teaching CS 3410 by Professors Weatherspoon, Bala, Bracy, and Sirer. See P&H Chapter: 2.16-2.20, 4.1-4.4,
More informationChapter 2. Instructions: Language of the Computer. Adapted by Paulo Lopes
Chapter 2 Instructions: Language of the Computer Adapted by Paulo Lopes Instruction Set The repertoire of instructions of a computer Different computers have different instruction sets But with many aspects
More informationCS152 Computer Architecture and Engineering. Lecture 1 Introduction & MIPS Review Dave Patterson. www-inst.eecs.berkeley.
CS152 Computer Architecture and Engineering Lecture 1 Introduction & MIPS Review 2003-08-26 Dave Patterson (www.cs.berkeley.edu/~patterson) www-inst.eecs.berkeley.edu/~cs152/ CS 152 L01 Introduction &
More informationMidterm Questions Overview
Midterm Questions Overview Four questions from the following: Performance Evaluation: Given MIPS code, estimate performance on a given CPU. Compare performance of different CPU/compiler changes for a given
More informationAssembly Programming
Designing Computer Systems Assembly Programming 08:34:48 PM 23 August 2016 AP-1 Scott & Linda Wills Designing Computer Systems Assembly Programming In the early days of computers, assembly programming
More informationChapter 1. Computer Abstractions and Technology. Lesson 3: Understanding Performance
Chapter 1 Computer Abstractions and Technology Lesson 3: Understanding Performance Manufacturing ICs 1.7 Real Stuff: The AMD Opteron X4 Yield: proportion of working dies per wafer Chapter 1 Computer Abstractions
More informationCS 61C: Great Ideas in Computer Architecture. MIPS Instruction Formats
CS 61C: Great Ideas in Computer Architecture MIPS Instruction Formats Instructor: Justin Hsia 6/27/2012 Summer 2012 Lecture #7 1 Review of Last Lecture New registers: $a0-$a3, $v0-$v1, $ra, $sp Also: $at,
More informationMIPS Assembly Language Programming
MIPS Assembly Language Programming Bob Britton Chapter 1 The MIPS Architecture My objective in teaching assembly language is to introduce students to the fundamental concepts of contemporary computer architecture.
More informationComputer Organization and Structure. Bing-Yu Chen National Taiwan University
Computer Organization and Structure Bing-Yu Chen National Taiwan University Instructions: Language of the Computer Operations and Operands of the Computer Hardware Signed and Unsigned Numbers Representing
More informationINSTRUCTION SET COMPARISONS
INSTRUCTION SET COMPARISONS MIPS SPARC MOTOROLA REGISTERS: INTEGER 32 FIXED WINDOWS 32 FIXED FP SEPARATE SEPARATE SHARED BRANCHES: CONDITION CODES NO YES NO COMPARE & BR. YES NO YES A=B COMP. & BR. YES
More informationMIPS R-format Instructions. Representing Instructions. Hexadecimal. R-format Example. MIPS I-format Example. MIPS I-format Instructions
Representing Instructions Instructions are encoded in binary Called machine code MIPS instructions Encoded as 32-bit instruction words Small number of formats encoding operation code (opcode), register
More informationENGN1640: Design of Computing Systems Topic 03: Instruction Set Architecture Design
ENGN1640: Design of Computing Systems Topic 03: Instruction Set Architecture Design Professor Sherief Reda http://scale.engin.brown.edu School of Engineering Brown University Spring 2014 Sources: Computer
More informationECE Exam I February 19 th, :00 pm 4:25pm
ECE 3056 Exam I February 19 th, 2015 3:00 pm 4:25pm 1. The exam is closed, notes, closed text, and no calculators. 2. The Georgia Tech Honor Code governs this examination. 3. There are 4 questions and
More informationAnne Bracy CS 3410 Computer Science Cornell University. [K. Bala, A. Bracy, E. Sirer, and H. Weatherspoon]
Anne Bracy CS 3410 Computer Science Cornell University [K. Bala, A. Bracy, E. Sirer, and H. Weatherspoon] Understanding the basics of a processor We now have the technology to build a CPU! Putting it all
More informationCS3350B Computer Architecture MIPS Instruction Representation
CS3350B Computer Architecture MIPS Instruction Representation Marc Moreno Maza http://www.csd.uwo.ca/~moreno/cs3350_moreno/index.html Department of Computer Science University of Western Ontario, Canada
More informationCS 61c: Great Ideas in Computer Architecture
MIPS Instruction Formats July 2, 2014 Review New registers: $a0-$a3, $v0-$v1, $ra, $sp New instructions: slt, la, li, jal, jr Saved registers: $s0-$s7, $sp, $ra Volatile registers: $t0-$t9, $v0-$v1, $a0-$a3
More informationInstruction Set Principles. (Appendix B)
Instruction Set Principles (Appendix B) Outline Introduction Classification of Instruction Set Architectures Addressing Modes Instruction Set Operations Type & Size of Operands Instruction Set Encoding
More informationCENG3420 Lecture 03 Review
CENG3420 Lecture 03 Review Bei Yu byu@cse.cuhk.edu.hk 2017 Spring 1 / 38 CISC vs. RISC Complex Instruction Set Computer (CISC) Lots of instructions of variable size, very memory optimal, typically less
More informationChapter 2A Instructions: Language of the Computer
Chapter 2A Instructions: Language of the Computer Copyright 2009 Elsevier, Inc. All rights reserved. Instruction Set The repertoire of instructions of a computer Different computers have different instruction
More informationInstructions: Language of the Computer
Instructions: Language of the Computer Tuesday 22 September 15 Many slides adapted from: and Design, Patterson & Hennessy 5th Edition, 2014, MK and from Prof. Mary Jane Irwin, PSU Summary Previous Class
More informationComputer Organization and Structure. Bing-Yu Chen National Taiwan University
Computer Organization and Structure Bing-Yu Chen National Taiwan University Instructions: Language of the Computer Operations and Operands of the Computer Hardware Signed and Unsigned Numbers Representing
More informationInstruction Set Architecture part 1 (Introduction) Mehran Rezaei
Instruction Set Architecture part 1 (Introduction) Mehran Rezaei Overview Last Lecture s Review Execution Cycle Levels of Computer Languages Stored Program Computer/Instruction Execution Cycle SPIM, a
More informationA Processor. Kevin Walsh CS 3410, Spring 2010 Computer Science Cornell University. See: P&H Chapter , 4.1-3
A Processor Kevin Walsh CS 3410, Spring 2010 Computer Science Cornell University See: P&H Chapter 2.16-20, 4.1-3 Let s build a MIPS CPU but using Harvard architecture Basic Computer System Registers ALU
More informationLec 10: Assembler. Announcements
Lec 10: Assembler Kavita Bala CS 3410, Fall 2008 Computer Science Cornell University Announcements HW 2 is out Due Wed after Fall Break Robot-wide paths PA 1 is due next Wed Don t use incrementor 4 times
More informationECE 331 Hardware Organization and Design. Professor Jay Taneja UMass ECE - Discussion 5 2/22/2018
ECE 331 Hardware Organization and Design Professor Jay Taneja UMass ECE - jtaneja@umass.edu Discussion 5 2/22/2018 Today s Discussion Topics Program Concepts Floating Point Floating Point Conversion Floating
More informationConcocting an Instruction Set
Concocting an Instruction Set Nerd Chef at work. move flour,bowl add milk,bowl add egg,bowl move bowl,mixer rotate mixer... Read: Chapter 2.1-2.7 L03 Instruction Set 1 A General-Purpose Computer The von
More informationUCB CS61C : Machine Structures
inst.eecs.berkeley.edu/~cs61c UCB CS61C : Machine Structures Guest Lecturer Alan Christopher Lecture 08 MIPS Instruction Representation I 2014-02-07 BOINC MORE THAN JUST SETI@HOME BOINC (developed here
More informationChapter 2. Instructions: Language of the Computer
Chapter 2 Instructions: Language of the Computer Instruction Set The repertoire of instructions of a computer Different computers have different instruction sets But with many aspects in common Early computers
More informationTSK3000A - Generic Instructions
TSK3000A - Generic Instructions Frozen Content Modified by Admin on Sep 13, 2017 Using the core set of assembly language instructions for the TSK3000A as building blocks, a number of generic instructions
More informationProgramming the processor
CSC258 Week 9 Logistics This week: Lab 7 is the last Logisim DE2 lab. Next week: Lab 8 will be assembly. For assembly labs you can work individually or in pairs. No matter how you do it, the important
More informationCPS311 - COMPUTER ORGANIZATION. A bit of history
CPS311 - COMPUTER ORGANIZATION A Brief Introduction to the MIPS Architecture A bit of history The MIPS architecture grows out of an early 1980's research project at Stanford University. In 1984, MIPS computer
More informationCOMPUTER ORGANIZATION AND DESIGN
COMPUTER ORGANIZATION AND DESIGN 5 th The Hardware/Software Interface Edition Chapter 2 Instructions: Language of the Computer 2.1 Introduction Instruction Set The repertoire of instructions of a computer
More informationMACHINE LANGUAGE. To work with the machine, we need a translator.
LECTURE 2 Assembly MACHINE LANGUAGE As humans, communicating with a machine is a tedious task. We can t, for example, just say add this number and that number and store the result here. Computers have
More informationConcocting an Instruction Set
Concocting an Instruction Set Nerd Chef at work. move flour,bowl add milk,bowl add egg,bowl move bowl,mixer rotate mixer... Read: Chapter 2.1-2.6 L04 Instruction Set 1 A General-Purpose Computer The von
More informationWeek 10: Assembly Programming
Week 10: Assembly Programming Arithmetic instructions Instruction Opcode/Function Syntax Operation add 100000 $d, $s, $t $d = $s + $t addu 100001 $d, $s, $t $d = $s + $t addi 001000 $t, $s, i $t = $s +
More informationEE 109 Unit 13 MIPS Instruction Set. Instruction Set Architecture (ISA) Components of an ISA INSTRUCTION SET OVERVIEW
1 2 EE 109 Unit 13 MIPS Instruction Set Architecting a vocabulary for the HW INSTRUCTION SET OVERVIEW 3 4 Instruction Set Architecture (ISA) Defines the of the processor and memory system Instruction set
More informationCSCI 402: Computer Architectures. Instructions: Language of the Computer (3) Fengguang Song Department of Computer & Information Science IUPUI.
CSCI 402: Computer Architectures Instructions: Language of the Computer (3) Fengguang Song Department of Computer & Information Science IUPUI Recall Big endian, little endian Memory alignment Unsigned
More informationA General-Purpose Computer The von Neumann Model. Concocting an Instruction Set. Meaning of an Instruction. Anatomy of an Instruction
page 1 Concocting an Instruction Set Nerd Chef at work. move flour,bowl add milk,bowl add egg,bowl move bowl,mixer rotate mixer... A General-Purpose Computer The von Neumann Model Many architectural approaches
More informationCS61C : Machine Structures
inst.eecs.berkeley.edu/~cs61c CS61C : Machine Structures $2M 3D camera Lecture 8 MIPS Instruction Representation I Instructor: Miki Lustig 2014-09-17 August 25: The final ISA showdown: Is ARM, x86, or
More informationECE 2035 Programming HW/SW Systems Fall problems, 6 pages Exam Two 23 October Your Name (please print clearly) Signed.
Your Name (please print clearly) This exam will be conducted according to the Georgia Tech Honor Code. I pledge to neither give nor receive unauthorized assistance on this exam and to abide by all provisions
More informationMark Redekopp, All rights reserved. EE 352 Unit 3 MIPS ISA
EE 352 Unit 3 MIPS ISA Instruction Set Architecture (ISA) Defines the software interface of the processor and memory system Instruction set is the vocabulary the HW can understand and the SW is composed
More informationCS61CL Machine Structures. Lec 5 Instruction Set Architecture
CS61CL Machine Structures Lec Instruction Set Architecture David Culler Electrical Engineering and Computer Sciences University of California, Berkeley What is Computer Architecture? Applications Compiler
More informationECE 15B Computer Organization Spring 2010
ECE 15B Computer Organization Spring 2010 Dmitri Strukov Lecture 7: Procedures I Partially adapted from Computer Organization and Design, 4 th edition, Patterson and Hennessy, and classes taught by and
More informationece4750-parc-isa.txt
========================================================================== PARC Instruction Set Architecture ========================================================================== # Author : Christopher
More informationMIPS Assembly Language
MIPS Assembly Language Chapter 15 S. Dandamudi Outline MIPS architecture Registers Addressing modes MIPS instruction set Instruction format Data transfer instructions Arithmetic instructions Logical/shift/rotate/compare
More informationEE 109 Unit 8 MIPS Instruction Set
1 EE 109 Unit 8 MIPS Instruction Set 2 Architecting a vocabulary for the HW INSTRUCTION SET OVERVIEW 3 Instruction Set Architecture (ISA) Defines the software interface of the processor and memory system
More informationChapter 2. Instructions: Language of the Computer. HW#1: 1.3 all, 1.4 all, 1.6.1, , , , , and Due date: one week.
Chapter 2 Instructions: Language of the Computer HW#1: 1.3 all, 1.4 all, 1.6.1, 1.14.4, 1.14.5, 1.14.6, 1.15.1, and 1.15.4 Due date: one week. Practice: 1.5 all, 1.6 all, 1.10 all, 1.11 all, 1.14 all,
More informationOutline. EEL-4713 Computer Architecture Multipliers and shifters. Deriving requirements of ALU. MIPS arithmetic instructions
Outline EEL-4713 Computer Architecture Multipliers and shifters Multiplication and shift registers Chapter 3, section 3.4 Next lecture Division, floating-point 3.5 3.6 EEL-4713 Ann Gordon-Ross.1 EEL-4713
More informationMidterm Questions Overview
Midterm Questions Overview Four questions from the following: Performance Evaluation: Given MIPS code, estimate performance on a given CPU. Compare performance of different CPU/compiler changes for a given
More informationAssembly Language. Prof. Dr. Antônio Augusto Fröhlich. Sep 2006
Sep 2006 Prof. Antônio Augusto Fröhlich (http://www.lisha.ufsc.br) 33 Assembly Language Prof. Dr. Antônio Augusto Fröhlich guto@lisha.ufsc.br http://www.lisha.ufsc.br/~guto Sep 2006 Sep 2006 Prof. Antônio
More informationMidterm. Sticker winners: if you got >= 50 / 67
CSC258 Week 8 Midterm Class average: 4.2 / 67 (6%) Highest mark: 64.5 / 67 Tests will be return in office hours. Make sure your midterm mark is correct on MarkUs Solution posted on the course website.
More information