2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
|
|
- Nigel Oliver
- 5 years ago
- Views:
Transcription
1 2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner
2
3 Revision History Changes to the original manual are listed below: Version Date Description of Version /08/13 Initial release /9/10 Added beep functions /11/3 Corrected terminal character default, baud rate /11/5 Added Show Version /11/23 Added defaults to symbologies i
4 Important Notice No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein nor for incidental or consequential damages in connection with furnishing, performance or use of this material. We shall be under no liability in respect of any defect arising from fair wear and tear, willful damage, negligence, abnormal working conditions, failure to follow the instructions and warnings, or misuse or alteration or repair of the products without written approval. No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or translated into any human or computer or other language in any form or by any means electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise, except for brief passages which may be quoted for purposes of scholastic or literary review, without express written consent and authorization. We reserve the right to make changes in product design without reservation and without notification. The material in this guide is for information only and is subject to change without notice. All trademarks mentioned herein, registered or otherwise, are the properties of their various, ill, assorted owners. General Handling Precautions Do not dispose the scanner in fire. Do not put the scanner directly in the sun or by any heat source. Do not use or store the scanner in a very humid place. Do not drop the scanner or allow it to collide violently with other objects. Do not take the scanner apart without authorization Guidance for Printing This manual is in A5 size. Please double check your printer setting before printing it out. When the barcodes are to be printed out for programming, the use of a high-resolution laser printer is strongly suggested for the best scan result. Copyright All rights reserved. ii
5 Table of Contents Important Notice...ii General Handling Precautions...ii Guidance for Printing...ii Using the Scanner...1 Beeper Indication...1 LED Indication...1 tings and Programming...2 Program Up Flow...2 User Preferences...3 System tings...3 Show Version...3 Scan Mode...4 Interface Switch...5 Good Read Beep Length...6 Good Read Beep Frequency...7 Aiming Pattern...8 Terminal Character...9 RS232 Baud Rate...10 Country Code...12 Readable Symbologies...17 All Symbologies...17 UPC-A...18 UPC-E...19 EAN EAN Code Code Code Code Code Codabar...27 Plessey...28 MSI/Plessy...29 Interleaved 2 of IATA 2 of Matrix 2 of Straight 2 of Pharmacode...34 RSS RSS Expanded...36 RSS Limited...37 Component CC-A...38 Component CC-B...39 Component CC-C...40 iii
6 PDF Data Matrix...43 QR Code...44 Micro QR Code...45 Aztec...46 MaxiCode...47 Symbology Features...48 UPC / EAN...48 UPC-A...49 UPC-E...51 EAN EAN Code Codabar...58 Interleaved 2 of MSI / Plessey...61 Code Data Matrix...64 QR / Micro QR...65 Aztec...66 Data Editing (Prefix)...67 Prefix Up Flow...67 All Prefix...68 UPC / EAN Prefix...69 Code 128 Prefix Code 39 Prefix...72 Code 93 Prefix...73 Code 32 Prefix...74 Code 11 Prefix...75 Codabar Prefix...76 Plessey Prefix...77 MSI Prefix...78 Interleaved 2 of 5Prefix...79 IATA 2 of 5 Prefix...80 Matrix 2 of 5 Prefix...81 Straight 2 of 5 Prefix...82 Pharmacode Prefix...83 RSS 14 Prefix...84 RSS Expanded Prefix...85 RSS Limited Prefix...86 Component CC-A Prefix...87 Component CC-B Prefix...88 Component CC-C Prefix...89 PDF 417 Prefix...90 Micro PDF 417 Prefix...91 Data Matrix Prefix...92 iv
7 QR Prefix...93 Micro QR Prefix...94 Aztec Prefix...95 MaxiCode Prefix...96 Data Editing (Suffix)...97 Suffix Up Flow...97 All Suffix...98 UPC-A Suffix...99 UPC-E Suffix EAN 8 Suffix EAN 13 Suffix Code 128 Suffix Code 39 Suffix Code 93 Suffix Code 32 Suffix Code 11 Suffix Codabar Suffix Plessey Suffix MSI Suffix Interleaved 2 of 5 Suffix IATA 2 of 5 Suffix Matrix 2 of 5 Suffix Straight 2 of 5 Suffix Pharmacode Suffix RSS 14 Suffix RSS Expanded Suffix RSS Limited Suffix Component CC-A Suffix Component CC-B Suffix Component CC-C Suffix PDF-417 Suffix Micro PDF-417 Suffix Data Matrix Suffix QR Code Suffix Micro QR Suffix Aztec Suffix MaxiCode Suffix Appendix v
8
9 Using the Scanner Beeper Indication Beeps Indication 3 beeps in a series from low to high pitch Power up 1 short beep A barcode has been successfully decoded 2 short beeps The scanner has entered program mode 1 long beep A setting has been programmed 3 beeps in a series from low to high pitch The scanner has exited program mode 3 short beeps Error setting the scanner LED Indication LED Indication 1 blue flash A barcode has been successfully decoded 1
10 tings and Programming Scan selected barcodes in this manual to affect setup and programming of your handheld imaging barcode scanner. Decoding options and interface protocols can be tailored to a specific application. up parameters are stored in non-volatile memory in the scanner and are retained even when power is off. up parameters change only when you reset them. You may need to hide adjacent code patches with your hand when scanning. Program Up Flow Scan "" to set up --> Scan selected barcode --> Scan "" to confirm the setup. 2
11 User Preferences System tings Scan this barcode to return all parameters to the default values. Factory default settings Show Version Scan this barcode to display firmware version. Read device information 3
12 Scan Mode Scan a barcode below to set the imager to trigger manually or continue scanning until a barcode has been read. Handheld Mode (Default) Hands Free Mode 4
13 Interface Switch Your 2D Imager supports interfaces such as USB HID, RS232 serial, and USB virtual COM. To switch the interface, simply select the appropriate cable and configure the proper interface by following interface selection. RS-232 USB Keyboard (Default) USB Virtual COM Port *Driver required 5
14 Good Read Beep Length Scan a barcode below to select the duration of the beep signal after a good decode. 50 msec (Default) 100 msec 150 msec 200 msec 6
15 Good Read Beep Frequency Scan a barcode below to select the beep tone of the beep signal after a good decode. Low Medium (Default) High 7
16 Aiming Pattern Aiming pattern works as an aiming system to aid in barcode reading. Use the following settings to enable or disable this function. Auto (Default) Always On Always Off 8
17 Terminal Character None CR/LF (Default) CR TAB 9
18 RS232 Baud Rate Baud rate is the number of bits of data transmitted per second. the imager's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form
19 (Default)
20 Country Code Scann the following settings to change the country code. US (Default) Belgium Britain Denmark 12
21 France Germany Italy Norway 13
22 Portugal Spain Sweden Switzerland 14
23 Japan Hungary Czech Republic Slovakia 15
24 Romania Croatia Poland 16
25 Readable Symbologies This section provides the programming barcodes for enabling and disabling readable symbologies. If the default values suit requirements, programming is not necessary. All Symbologies Enable All Default 17
26 UPC-A Enable UPC-A (Default) Disable UPC-A 18
27 UPC-E Enable UPC-E (Default) Disable UPC-E 19
28 EAN-8 Enable EAN 8 (Default) Disable EAN 8 20
29 EAN 13 Enable EAN 13 (Default) Disable EAN 13 21
30 Code 128 Enable Code 128 (Default) Disable Code
31 Code 39 Enable Code 39 (Default) Disable Code 39 23
32 Code 93 Enable Code 93 (Default) Disable Code 93 24
33 Code 32 Enable Code 32 Disable Code 32 (Default) 25
34 Code 11 Enable Code 11 Disable Code 11 (Default) 26
35 Codabar Enable Codabar (Default) Disable Codabar 27
36 Plessey Enable Plessey Disable Plessey (Default) 28
37 MSI/Plessy Enable MSI/Plessy Disable MSI/Plessy (Default) 29
38 Interleaved 2 of 5 Enable Interleaved 2 of 5 (Default) Disable Interleaved 2 of 5 30
39 IATA 2 of 5 Enable IATA 2 of 5 Disable IATA 2 of 5 (Default) 31
40 Matrix 2 of 5 Enable Matrix 2 of 5 Disable Matrix 2 of 5 (Default) 32
41 Straight 2 of 5 Enable Straight 2 of 5 Disable Straight 2 of 5 (Default) 33
42 Pharmacode Enable Pharmacode Disable Pharmacode (Default) 34
43 RSS 14 Enable RSS 14 (Default) Disable RSS 14 35
44 RSS Expanded Enable RSS Expanded (Default) Disable RSS Expanded 36
45 RSS Limited Enable RSS Limited (Default) Disable RSS Limited 37
46 Component CC-A Enable Component CC-A Disable Component CC-A (Default) 38
47 Component CC-B Enable Component CC-B Disable Component CC-B (Default) 39
48 Component CC-C Enable Component CC-C Disable Component CC-C (Default) 40
49 PDF417 Enable PDF417 (Default) Disable PDF417 41
50 Micro PDF417 Enable Micro PDF417 (Default) Disable Micro PDF417 42
51 Data Matrix Enable Data Matrix (Default) Disable Data Matrix 43
52 QR Code Enable QG Code (Default) Disable QR Code 44
53 Micro QR Code Enable Micro QG Code (Default) Disable Micro QR Code 45
54 Aztec Enable Aztec Disable Aztec (Default) 46
55 MaxiCode Enable MaxiCode Disable MaxiCode (Default) 47
56 Symbology Features This section provides the programming barcodes for selecting features available to different symbologies. UPC / EAN Enable decoding of 2/5-digit supplemental code for UPC-A, UPC-E, EAN-13, and EAN-8 Disable decoding of 2/5-digit supplemental code for UPC-A, UPC-E, EAN-13, and EAN-8 (Default) 48
57 UPC-A Enable UPC-A Number System digit (Default) Disable UPC-A Number System digit Enable UPC-A check digit (Default) Disable UPC-A check digit 49
58 Enable conversion of UPC-A to EAN13 Disable conversion of UPC-A to EAN13 (Default) 50
59 UPC-E Enable UPC-E Number System digit (Default) Disable UPC-E Number System digit Enable UPC-E check digit (Default) Disable UPC-E check digit 51
60 Enable conversion of UPC-E to UPC-A Disable conversion of UPC-E to UPC-A (Default) 52
61 EAN 8 Enable EAN 8 check digit (Default) Disable EAN 8 check digit Enable conversion of EAN 8 to EAN 13 Disable conversion of EAN 8 to EAN 13 (Default) 53
62 EAN 13 Enable EAN 13 check digit (Default) Disable EAN 13 check digit Enable conversion of EAN 13 to ISBN Disable conversion of EAN 13 to ISBN (Default) 54
63 Enable conversion of EAN 13 to ISSN Disable conversion of EAN 13 to ISSN (Default) 55
64 Code 39 Enable Code 39 full ASCII mode Disable Code 39 full ASCII mode (Default) Enable Start and Stop characters Disable Start and Stop characters (Default) 56
65 Disable Checksum (Default) Enable checksum and send check character Enable checksum and strip check character 57
66 Codabar Disable Checksum (Default) Enable checksum and send check character Enable checksum and strip check character 58
67 Interleaved 2 of 5 Disable Checksum (Default) Enable checksum and send check character Enable checksum and strip check character 59
68 Default quiet zone checking No length checking performed (Default) Smaller quiet zone allowed 60
69 MSI / Plessey Disable MSI Plessey checksum Mod 10 checksum (Default) Mod 10/10 checksum Mod 11/10 checksum 61
70 Output checksum character( s) (Default) Strip checksum character(s) 62
71 Code 11 Output checksum character(s) Strip checksum character(s) (Default) 63
72 Data Matrix Enable mirror decoding (Default) Disable mirror decoding 64
73 QR / Micro QR Enable mirror decoding (Default) Disable mirror decoding 65
74 Aztec Enable mirror decoding (Default) Disable mirror decoding 66
75 Data Editing (Prefix) Prefix is additional characters that can be sent before the scanned data. Please scan the barcodes in the selection below to set your prefix. Prefix Up Flow 1. Scan. 2. Enable barcode type. 3. Scan prefix you would like to add from HEX within ASCII Table. 4. Scan. Ex. If we wish to add 3 as prefix for all barcode type, then follow procedure as below, Scan [] to enter setup. Then we select barcode by scanning [Enable All], then we scan [3] as 3 of ASCII HEX. At the end, we scan [] to completed setup. 67
76 All Prefix Enable All Disable All (Default) 68
77 UPC / EAN Prefix Enable UPC-A Disable UPC-A Enable UPC-E Disable UPC-E 69
78 Enable EAN 8 Disable EAN 8 Enable EAN 13 Disable EAN 13 70
79 Code 128 Prefix Enable Code 128 Disable Code
80 Code 39 Prefix Enable Code 39 Disable Code 39 72
81 Code 93 Prefix Enable Code 93 Disable Code 93 73
82 Code 32 Prefix Enable Code 32 Disable Code 32 74
83 Code 11 Prefix Enable Code 11 Disable Code 11 75
84 Codabar Prefix Enable Codabar Disable Codabar 76
85 Plessey Prefix Enable Plessey Disable Plessey 77
86 MSI Prefix Enable MSI Disable MSI 78
87 Interleaved 2 of 5Prefix Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 79
88 IATA 2 of 5 Prefix Enable IATA 2 of 5 Disable IATA 2 of 5 80
89 Matrix 2 of 5 Prefix Enable Matrix 2 of 5 Disable Matrix 2 of 5 81
90 Straight 2 of 5 Prefix Enable Straight 2 of 5 Disable Straight 2 of 5 82
91 Pharmacode Prefix Enable Pharmacode Disable Pharmacode 83
92 RSS 14 Prefix Enable RSS 14 Disable RSS 14 84
93 RSS Expanded Prefix Enable RSS Expanded Disable RSS Expanded 85
94 RSS Limited Prefix Enable RSS Limited Disable RSS Limited 86
95 Component CC-A Prefix Enable Component CC-A Disable Component CC-A 87
96 Component CC-B Prefix Enable Component CC-B Disable Component CC-B 88
97 Component CC-C Prefix Enable Component CC-C Disable Component CC-C 89
98 PDF 417 Prefix Enable PDF 417 Disable PDF
99 Micro PDF 417 Prefix Enable Micro PDF 417 Disable Micro PDF
100 Data Matrix Prefix Enable Data Matrix Disable Data Matrix 92
101 QR Prefix Enable QR Code Disable QR Code 93
102 Micro QR Prefix Enable Micro QR Disable Micro QR 94
103 Aztec Prefix Enable Aztec Disable Aztec 95
104 MaxiCode Prefix Enable MaxiCode Disable MaxiCode 96
105 Data Editing (Suffix) Suffix is additional characters that can be sent after the scanned data. Please scan the barcodes in the selection below to set your suffix. Suffix Up Flow 1. Scan. 2. Enable barcode type. 3. Scan suffix you would like to add from HEX within ASCII Table. 4. Scan. Ex. If we wish to add 36 as suffix for all barcode type, then follow procedure as below. Scan [] to enter setup. Then we select barcode by scanning [Enable All], then we scan [3] as 3 of ASCII HEX and [6] as 6. 97
106 All Suffix Enable All Disable All (Default) 98
107 UPC-A Suffix Enable UPC-A Disable UPC-A 99
108 UPC-E Suffix Enable UPC-E Disable UPC-E 100
109 EAN 8 Suffix Enable EAN 8 Disable EAN 8 101
110 EAN 13 Suffix Enable EAN 13 Disable EAN
111 Code 128 Suffix Enable Code 128 Disable Code
112 Code 39 Suffix Enable Code 39 Disable Code
113 Code 93 Suffix Enable Code 93 Disable Code
114 Code 32 Suffix Enable Code 32 Disable Code
115 Code 11 Suffix Enable Code 11 Disable Code
116 Codabar Suffix Enable Codabar Disable Codabar 108
117 Plessey Suffix Enable Plessey Disable Plessey 109
118 MSI Suffix Enable MSI Disable MSI 110
119 Interleaved 2 of 5 Suffix Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 111
120 IATA 2 of 5 Suffix Enable IATA 2 of 5 Disable IATA 2 of 5 112
121 Matrix 2 of 5 Suffix Enable Matrix 2 of 5 Disable Matrix 2 of 5 113
122 Straight 2 of 5 Suffix Enable Straight 2 of 5 Disable Straight 2 of 5 114
123 Pharmacode Suffix Enable Pharmacode Disable Pharmacode 115
124 RSS 14 Suffix Enable RSS 14 Disable RSS
125 RSS Expanded Suffix Enable RSS Expanded Disable RSS Expanded 117
126 RSS Limited Suffix Enable RSS Limited Disable RSS Limited 118
127 Component CC-A Suffix Enable Component CC-A Disable Component CC-A 119
128 Component CC-B Suffix Enable Component CC-B Disable Component CC-B 120
129 Component CC-C Suffix Enable Component CC-C Disable Component CC-C 121
130 PDF-417 Suffix Enable PDF417 Disable PDF
131 Micro PDF-417 Suffix Enable Micro PDF417 Disable Micro PDF
132 Data Matrix Suffix Data Matrix Enable Data Matrix Disable 124
133 QR Code Suffix QR Code Enable QR Code Disable 125
134 Micro QR Suffix Micro QR Enable Micro QR Disable 126
135 Aztec Suffix Aztec Enable Aztec Disable 127
136 MaxiCode Suffix MaxiCode Enable MaxiCode Disable 128
137 Appendix AIM ID Enable this function to display symbology Identifier defined by AIM organization. Enable AIM ID Disable AIM ID (Default) 129
138 ASCII Code For parameters requiring specific numeric values, scan the appropriately numbered barcode(s). Space! " # $ % 130
139 & ' ( ) * + 131
140 , -. / : ; 132
141 < = 133
142
143 A B 135
144 C D E F G H 136
145 I J K L M N 137
146 O P Q R S T 138
147 U V W X Y Z 139
148 a b c d e f 140
149 g h i j k l 141
150 m n o p q r 142
151 s t u v w x 143
152 y z 144
2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0
More information2D Imaging Barcode Scanner. Programming. Advanced Handheld High Speed Laser Scanner
2D Imaging Barcode Scanner Programming 1 Advanced Handheld High Speed Laser Scanner This Programming Guide is intended for: 2D Image Handheld Scanner: Z 3172 Plus 2D Image Hands Free Scanner: Z 8072,
More information2D Imaging Barcode Scanner. Programming. Advanced Handheld High Speed Laser Scanner
2D Imaging Barcode Scanner Programming 1 Advanced Handheld High Speed Laser Scanner This Programming Guide is intended for: 2D Image Handheld Scanner: Z 3272 Plus Revision History Changes to the original
More information2D Imaging Barcode Scanner GLLS. Programming Guide. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner GLLS Programming Guide 1 Advanced Handheld High-Speed Laser Scanner This Programming Guide is intended for: 2D Image Handheld Scanner: Z-3172 Plus, Z-3272 Series 2D Image Hands-Free
More information2D Imaging Barcode Scanner. Programming. Advanced Handheld High-Speed Laser Scanner
2D Imaging Barcode Scanner Programming 1 Advanced Handheld High-Speed Laser Scanner This Programming Guide is intended for: 2D Image Engine: Z-5212 Revision History Changes to the original manual are
More informationBarcode Scanner. Model no. NuScan User s Manual
Barcode Scanner Model no. NuScan 5000 User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
More informationWireless Laser Barcode Scanner ils 6300BU. User s Manual
Wireless Laser Barcode Scanner ils 6300BU User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
More informationAdvanced Handheld High-Speed Laser Scanner
GLLS 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 2015/03/03 Initial release 1.1 2015/04/15 Added
More informationNuscan 3200 Optical Laser Barcode Scanner
Nuscan 3200 Optical Laser Barcode Scanner Programming Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
More informationLaser Barcode Scanner Model no. LS6007 FS5027
Laser Barcode Scanner Model no. LS6007 FS5027 User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
More informationDisclaimer. Please read through the manual carefully before using the product and operate it
ONEBRAND,ONESOLUTI ON 2D Handhel dbar codescanner UserManual Disclaimer Please read through the manual carefully before using the product and operate it according to the manual. It is advised that you
More informationMK D Imager Barcode Scanner Configuration Guide
MK-5500 2D Imager Barcode Scanner Configuration Guide V1.4 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 2 Communication Interfaces...
More informationLaser Barcode Scanner ARP Nr User s Manual
Laser Barcode Scanner ARP Nr. 853782 User s Manual FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
More information2D Barcode Reader User Guide V 1.2.1
2D Barcode Reader User Guide V 1.2.1 Table of Contents 1 Getting Started... 3 1.1 About This Guide... 3 1.2 Barcode Scanning... 3 1.3 Factory Defaults... 3 1.4 Firmware Version Number... 3 2 Communication
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-1202 Quick Setup Guide This is 1D&2D plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer
More informationGS500 2D Area-Imaging Scanner. User Manual
GS500 2D Area-Imaging Scanner User Manual Table of Contents Table Of Contents... 1 Chapter 1 Getting Started... 6 About This Guide... 6 Barcode Scanning... 6 Barcode Programming... 6 Factory Defaults...
More informationMS810 Laser Scanner. Product Reference Guide. Rev. A
MS810 Laser Scanner Product Reference Guide Rev. A 1 Preface About This Manual This manual explains how to install, operate and maintain the Unitech MS810 Laser Scanner. No part of this publication may
More informationMS810 Laser Scanner. Product Reference Guide. Rev. A
MS810 Laser Scanner Product Reference Guide Rev. A 1 Preface About This Manual This manual explains how to install, operate and maintain the Unitech MS810 Laser Scanner. No part of this publication may
More informationCR2300 CR2600 CR3600 (DPM)
CONFIGURATION GUIDE ENGLISH CR2300 CR2600 CR3600 (DPM) CONFIGURATION GUIDE: VERSION 12 SUPPORTED FIRMWARE: READERS 0956+, MODEM 2000+ RELEASE DATE: SEPTEMBER 2014 www.codecorp.com User Manuals YouTube.com/codecorporation
More information2D Scan Engine Confguration Guide. 2D Barcode Scanner Configration Guide
2D Barcode Scanner Configration Guide 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM One Way Mode...6 (A3) USB Native Two Way Mode...6 (A4) USB
More informationIf you want to have other configurations please refer to below programming barcodes. Check Scanner Version
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
More informationCode Reader 2300/2600/3600/CR3600 DPM Configuration Guide
Code Reader 2300/2600/3600/CR3600 DPM Configuration Guide 1 Table of Contents Modem Settings (for use with the Charging Station with an Embedded CodeXML Modem or the external CodeXML M3 Modem when paired
More informationCode Reader 1000/1400/8000 Configuration Guide
Code Reader 1000/1400/8000 Configuration Guide Code Reader 1000 Code Reader 1400 Code Reader 8000 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM
More informationFactory Default Configuration. Factory Default Configuration
Factory Default Configuration Trigger Mode Terminator Factory Default Configuration Setup Code *open Parameter code close Parameter code Product information 1. Serial Port Using Serial Portread moudle
More informationXL D Barcode Scanner User's Manual V1.0
XL-3100 2D Barcode Scanner User's Manual V1.0 Table of Contents Revision History...-3- Chapter 1 Getting Started... 1 Introduction... 1 About This Guide... 2 Barcode Scanning... 2 Configuring the XL-3100...
More informationSIMATIC Ident Handheld reading systems SIMATIC MV325 Configuration guide Compact User Manual
SIMATIC Ident Handheld reading systems Compact User Manual Legal information Warning notice system This manual contains notices you have to observe in order to ensure your personal safety, as well as to
More informationRT206 User Guide. RT206 OEM 2d Scan Engine User Guide
RT206 OEM 2d Scan Engine User Guide Table Of Contents Chapter 1 Getting Started... 1 About This Guide... 1 Connecting EVK to PC... 1 Barcode Programming... 2 Factory Defaults... 2 Custom Defaults... 3
More informationCode Reader 2300/2600 Configuration Guide
Code Reader 2300/2600 Configuration Guide 1 Table of Contents Modem Settings (for use with the Charging Station with an Embedded CodeXML Modem or the external CodeXML M3 Modem when paired with a CR2300/CR2600)
More informationCode Reader 1000/1400/8000 Configuration Guide
Code Reader 1000/1400/8000 Configuration Guide Code Reader 1000 Code Reader 1400 Code Reader 8000 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6 (A2) USB Virtual COM
More informationConfiguration Guide. Code Reader C005435_02_CR1000_CR8000_ConfigurationGuide 1
Code Reader 1000/8000 Configuration Guide Code Reader 1000 Code Reader 8000 C005435_02_CR1000_CR8000_ConfigurationGuide 1 Table of Contents USB Settings USB Keyboard Mode...6 (A1) USB Downloader Mode...6
More informationNCR Realscan 7837 High-Performance Scanners. User s Guide Issue A
NCR Realscan 7837 High-Performance Scanners User s Guide 497-0427357 Issue A Table of Contents Chapter 1 - Getting Started About This Manual... 1-1 Unpacking the Scanner... 1-2 RealScan 7837 High-Performance
More informationAPPENDIX E COMMAND BARCODES
APPENDIX E COMMAND BARCODES Scan command barcode(s) to quickly configure the CHS 7X or 7XRx. By default, the CHS is in HID mode as a Keyboard device. IMPORTANT! Make sure the CHS is not connected to a
More informationRT209 OEM 2d Scan Engine User Guide
RT209 OEM 2d Scan Engine User Guide Table Of Contents Chapter 1 Getting Started... 1 About This Guide... 1 Connecting EVK to PC... 1 Barcode Scanning... 1 Barcode Programming... 1 Custom Defaults... 3
More informationBS8050-3V Piranha (1D) Barcode Scanner. User Guide
BS8050-3V Piranha (1D) Barcode Scanner User Guide Disclaimer 2015 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate
More informationInnovation By Design
Innovation By Design LAZERLOGIC LL2424 Programme Manual 01256 840927 @ sales@lazerlogic.com Kensington House, 21 Mill Road, Basingstoke, Hampshire RG24 9SN Enter/Exit Programming Mode ( represents the
More informationBD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide
BD-6500BT Bluetooth 2D Barcode Scanner Configuration Guide V 2.1 Table of Contents 1 Getting Started. 3 1.1 About This Guide.. 3 1.2 Barcode Scanning.. 3 1.3 Factory Defaults.. 3 1.4 Pairing Cradle 4 1.5
More informationKB9000 Programmable Touch Bumpbar USER MANUAL
KB9000 Programmable Touch Bumpbar USER MANUAL Table of Contents 1 Introduction...2 1.1 Safety Information... 2 1.2 Electromagnetic compatibility statement... 3 2 Overview... 4 2.1 Appearance... 4 2.2 Features...
More informationIPDA014-2D. Embedded 2D Barcode Scan Engine. User Guide
IPDA014-2D Embedded 2D Barcode Scan Engine User Guide 1 Table Of Contents Chapter 1 Getting Started...8 Introduction...8 About This Guide...8 Barcode Scanning...9 Barcode Programming...9 Factory Defaults...9
More informationCode Reader 900FD Configuration Guide
Code Reader 900FD Configuration Guide 1 Table of Contents Reader Settings Save Settings...5 (A1) Reader ID and Firmware Version... 5 (A2) Feedback Settings Beep On...5 (A3) Beep Off...5 (A4) Targeting
More informationGetting Familiar with Your FuzzyScan
Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan Imager. All FuzzyScan imagers deliver world-class performance for a broad range of applications to unleash your productivity.
More informationUser s Guide. Linear Imager
User s Guide 3200 Linear Imager Disclaimer Hand Held Products, Inc. ( Hand Held Products ) reserves the right to make changes in specifications and other information contained in this document without
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-M3 Quick Setup Guide This is a plug and play model if you use a US keyboard. If you use other type of keyboard, plug the USB cable on your device, setup keyboard language before you use it. (refer to
More informationNLS-EM3095 Embedded 2D Barcode Scan Engine. User Guide
NLS-EM3095 Embedded 2D Barcode Scan Engine User Guide Disclaimer 2013 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate
More informationPOSSAFE LQ300 BARKOD OKUYUCU. Configuration Manual
POSSAFE LQ300 BARKOD OKUYUCU Configuration Manual System function setting Factory Default setting All scanners have a factory default settings, scan "Factory Default "bar code, will make the scanner all
More informationWireless 2D Pocket barcode scanner
* Wireless 2D Pocket barcode scanner Quick Guide Model no.: idc9507l Introduction Designed primarily for P.O.S. retail environments, the idc9507l is a wireless pocket barcode scanner that allows you to
More informationBarcode BC-29. Decoder & Platform. Programming Manual
Barcode BC-29 Decoder & Platform Programming Manual CONTENTS Getting Started...2 Setting Procedures...3 Setting Flow Chart......4 Group 1 : Multi Validation....5 Group 2 : Hold Time...6 Group 3: Scan Mode
More informationZ3S. Quick Setup Guide V Connection Mode. Working via Bluetooth. Barcode Programming. Working via USB cable
Z3S V18.9.7 Quick Setup Guide Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it's a plug and play model. If you use other type
More informationSerial Programming Command Manual
Serial Programming Command Manual Disclaimer The information in this publication does not represent a commitment on the part of Newland. Newland shall not be liable for technical or editorial errors or
More information2D Wired Barcode Scanner Overview. Keyboard Language In order to let scanner upload the codes in a correct way, you have to set the keyboard language.
2D Wired Barcode Scanner Overview Netum wired 2D Plug and Play barcode scanner integrates a high-performance processer with an effective decoding board, combining a fast decoding speed.the device can easily
More informationFD-011WU. 2D Barcode Reader User Guide V1.6CC
FD-011WU 2D Barcode Reader User Guide V1.6CC Table of Contents 1 Getting Started... 1 1.1 Factory Defaults... 1 2 Communication Interfaces...2 2.1 TTL-232 Interface... 2 2.2 Baud Rate... 3 2.3 Data Bit
More informationIf you want to do other configurations please refer to below programming barcodes.
NT-W8 V18.9.1 Quick Setup Guide This model can work both via USB cable or 2.4G receiver. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US
More informationNT-1200 CCD Wired Barcode Scanner Overview
NT-1200 CCD Wired Barcode Scanner Overview Netum wired CCD Plug and Play barcode scanner integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. IP67
More information2D Image Handheld Scanner
1 Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 9/6/2018 Initial release i Important Notice No warranty of any kind is made in regard to this
More information2D barcode scanner User Manual
2D barcode scanner User Manual V1.1 2013/06/08 Table of Contents Introduction... 4 Interface Settings... 4 RS232 Serial Port... 4 USB Interface Settings... 5 RS232 Settings... 6 Keyboard Settings... 9
More informationManual de Programación
Manual de Programación SM2410, SM2410B, SM2420 y SM2430 ESPECIFICACIONES SUJETAS A CAMBIO SIN PREVIO AVISO. Enter/Exit Programming Mode (This barcode is also found at page 8.) IMPORTANT NOTICE Every effort
More information000A1 Display inward character string(custom) USB-HID Single not triggered Not:CCD inapplicability Continuous Scan Mode
000A0 Version(custom) 000A1 Display inward character string(custom) 000A2 Display series number (custom) 000B0 Factory 000600 PS2 000601 RS-232 000602 USB-HID 013300 Scan Mode 013301 Single not triggered
More informationPortable Data Collector Series Z-9000 ( Version 1.0) User s Manual ZEBEX INDUSTRIES INC.
Portable Data Collector Series Z-9000 ( Version 1.0) User s Manual ZEBEX INDUSTRIES INC. WWW.ZEBEX.COM Revision History Changes to the original manual are listed below: Version Date Description of Version
More informationmarson MT8200S 2D Handheld Scanner User Manual V / 6 / 25 - I -
marson MT8200S 2D Handheld Scanner User Manual V1.1 2018 / 6 / 25 - I - Table of Contents 1 Gettting Started...1 1.1 Introduction...1 1.2 Configuring MT8200S...1 1.2.1 Barcode Configurability...1 1.2.2
More informationTable of Contents Sleep Settings How to Configure the Scanner. 7 Chapter 2 System Setup
Table of Contents Chapter 1 System Information 1.1 Setup Scanner with PC 1.2 Setup Scanner with Mobile Device 1.3 Configure ios On-Screen Keyboard 1.4 Memory Mode 3 4 4 5 1.5 Sleep Settings 6 1.6 How to
More informationCONFIGURATION GUIDE ID-110
CONFIGURATION GUIDE ID-110 HSD 0320.011 / 09.17-V01de Table of content Bluetooth Settings 7 Bluetooth Radio Disconnect (Reconnect via Quick Connect Barcode) 7 () Bluetooth Auto Reconnect - Default 7 ()
More informationNT-1228BL. Quick Setup Guide V Connection Mode. Working via Bluetooth. Barcode Programming
NT-1228BL V18.7.12 Quick Setup Guide This model can work both via USB cable or via bluetooth. Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use
More informationData Collector Series Z.A.C ( Version 1.00 ) User s Manual
Data Collector Series Z.A.C ( Version 1.00 ) User s Manual Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 March 1, 2013 Initial release 1.1 August
More informationProduct Engineering Specification Scan Utility
Product Engineering Specification Scan Utility Overview: 1. What is Scan Utility? Scan Utility provides a user interface that communicates with the scanner. It can set up the scanner, download the scanner
More informationOPL-DCL Standard Demo Manual With (Micro) PDF417 and RSS. User s Manual. Version LFBP0510
OPL-DCL Standard Demo Manual With (Micro) PDF417 and RSS User s Manual Version LFBP0510 Supported models: OPL9723, OPL9724, OPL9712, OPL9728, DCL1530, DCL1531 (For Operating System versions LBxV0225 or
More informationCCD Barcode Scanner User Manual
CCD Barcode Scanner User Manual Introduction This product is 1D CCD barcode scanner, also known as barcode reader or barcode gun scanner, is a technical equipment to read barcode information, by adopting
More informationSPEECHMIKE TM PHI BARCODE READER PROGRAMMING MANUAL PRO READER
SPEECHMIKE TM PRO READER 6184 BARCODE READER PROGRAMMING MANUAL PHI CONTENTS Getting Started -------------------------------------------------------------- 2 Setup Procedures ------------------------------------------------------------3
More informationGetting Started Setup Procedures
Getting Started ------------------------------------------------------------2 Setup Procedures ---------------------------------------------------------3 Setup Menu----------------------------------------------------------------
More information530-2D-USB 2D Scanner High Speed Imaging USB Bar Code Scanner
530-2D-USB 2D Scanner High Speed Imaging USB Bar Code Scanner Worth Data USB 2D Bar Code Scanner - Scan 1D & 2D Matrix Bar codes www.worthdata.com Owner s Manual Warning: This equipment generates, uses
More informationSpecification or version may be subject to change without notice. The actual specification and version are based on the product delivered.
1 IMPORTANT NOTICE No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable
More information2D Wired Barcode Scanner Overview
2D Wired Barcode Scanner Overview Netum wired 2D Plug and Play barcode scanner integrates a high performance processer with an effective decoding board, combining a fast decoding speed. IP67 waterproof
More informationModel NT-1203 With SPP Mode
Model NT-1203 With SPP Mode Get Started: This is 1D and 2D bluetooth scanner. Follow below "bluetooth connection" instruction to pair with your device and then setup the keyboard language (if you US keyboard,
More informationRIOSCAN CCD barcode scanner
RIOSCAN CCD barcode scanner Quick Guide M o de l no: i CR6307AS Introduction Designed primarily for smartphone, the icr6307as is a CCD barcode scanner that allows you to scan various barcoded items and
More informationBARCODE SCANNER. FUZZYSCAN FAMILY Quick Start Guide
BARCODE SCANNER FUZZYSCAN FAMILY Quick Start Guide Getting Familiar with Your FuzzyScan Thank you for choosing Cino FuzzyScan Bar Code Scanner. All FuzzyScan scanners deliver world-class performance for
More informationBARCODE SCANNER. Configuration Guide - 1 -
BARCODE SCANNER Configuration Guide - 1 - Table of Contents Chapter 1 System Information 1.1 About this manual 3 1.2 How to set up the parameter 3 1.3 How to set up the parameter - II 4 Chapter 2 System
More informationFS02 user manual. HID mode for IOS 1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly.
FS02 user manual HID Mode for IOS HID mode for IOS 1. Turn on the barcode reader, and read below barcodes sequence, the blue LED will flash rapidly. 2. Enable the bluetooth of IOS to pair with the barcode
More information1. Factory Default Se ng (include below three steps)
2.4 GHz Wireless USB2.0 Wired Important Note: There will not have a beep sound for some of configura on.as long as light turns off a few seconds before you release the trigger bu on that means scanner
More informationLow voltage Alarm: Scanner will make 5x beeps to remind you that it's under low voltage. Plug the USB cable to charge power for it.
NT-W6 V18.9.1 Connection Mode Working via USB cable Get Started: Connect scanner with your device via USB cable. If you use US keyboard, it's a plug and play model. If you use other type of keyboard, please
More informationCode Reader 4100 Configuration Guide
Code Reader 4100 Configuration Guide C006013_01_CR4100_ConfigurationGuide 1 Table of Contents Symbologies Aztec On - Default...5 (A1) Aztec Off...5 (A2) Aztec Inverse On...5 (A3) Aztec Inverse & Normal...5
More informationBL1000. Programming Guide
Programming Guide BL1000 Important notice Every effort is made to ensure the accuracy of our product information; however, we accept no responsability for errors or omissions including, but not limited
More informationNLS-EM3096. OEM Scan Engine. User Guide
NLS-EM3096 OEM Scan Engine User Guide Disclaimer 2014-2016 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More information4620, Quick Start
4620, 5620 Quick Start Getting Started Turn off power before connecting the base, then power up the computer once the base is fully connected. When the base is connected and powered up, put the imager
More informationFM420 Fixed Mount Barcode Scanner Quick Start V1.0
FM420 Fixed Mount Barcode Scanner Quick Start V1.0 Revisions Version Description Date V 1.0 Support as from FM420 firmware V 3.06.021 and higher. 19-10-2010 Content Getting to Start Unpacking... E-01 Main
More informationArea Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E
Area Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E Copyright @ 2017 This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in
More informationCode Interleaved 2 of 5. Plessey Minimum And Plessey Maximum Length. Field Size/Char. Enabled.
Chapter 5: Configuration Decoded (HHP) Plessey Minimum And Plessey Maximum Length These parameters apply to Plessey bar codes.the length of a code refers to the number of characters (i.e., human readable
More informationXi2000-BT Series Configuration Guide
U.S. Default Settings Sequence Reset Scanner Xi2000-BT Series Configuration Guide Auto-Sense Mode ON UPC-A Convert to EAN-13 OFF UPC-E Lead Zero ON Save Changes POS-X, Inc. 2130 Grant St. Bellingham, WA
More informationNLS-EM3096. OEM Scan Engine. User Guide
NLS-EM3096 OEM Scan Engine User Guide Disclaimer 2014-2018 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationC O N F I G U R A T I O N G U I D E
C O N F I G U R A T I O N G U I D E Copyright @ 2013, This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in part, be copied, photocopied, reproduced,
More informationWired Laser Barcode Scanner User Manual V:1509
Wired Laser Barcode Scanner User Manual 7 1 2 1 1 0 0 0 0 4 V:1509 Thanks you for choosing our company s product. To have a better operating experience, please read this manual carefully. Reading Angle
More information1D IMAGER MODELS - 7Ci, 7Di, D700
COMMAND BARCODES 1D IMAGER MODELS - 7Ci, 7Di, D700 This document pertains to the following 7Ci, 7Di, D700: The part number (P/N) is labeled inside the battery compartment for the CHS 7 Series. Ci Di Model
More informationUser s Manual. Xi3000 Scanner. Table of Contents
Xi3000 Scanner User s Manual Table of Contents Restore Default Settings... 1 Exit Setup without Changes... 1 Configure Through RS232... 1 List Setting... 1 Buzzer Settings... 2 Reading Redundancy Setting...
More information2D BARCODE SCANNER CA-SC-20200B
D BARCODE SCANNER CA-SC-B Quick Start Guide Getting Familiar with Your Device Thank you for choosing Capture Bar Code Scanner. All Devices deliver world-class performance for a broad range of applications
More informationThis configuration including four steps. Please scan below codes one by one.
Bluetooth Wireless Barcode Scanner Overview Netum bluetooth wireless model integrates a high-performance processer with an effective decoding board, combining a fast decoding speed. High precision and
More informationArea Imager Bar Code Scanner
Area Imager Bar Code Scanner 2 D C O N F I G U R A T I O N G U I D E SYMBOLOGY PROGRAMMING for POCKET SCANNERS Copyright @ 2017 This manual is copyrighted, with all right reserved. Under the copyright
More informationAdvanced Handheld High-Speed Laser Scanner
GLLS 1 Advanced Handheld High-Speed Laser Scanner Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 2013/05/02 Initial release 1.1 2013/8/26 Made
More informationSetting code User Manual
Powered By Setting code User Manual Version 2.02.007 Tel: 510 490 3888 Fax: 510 490 3887 http://www.newlandna.com Contents CHAPTER 1 SETTING CODE TURN-ON/OFF..... 1 CHAPTER 2 SETTING CODE STEP-BY-STEP
More informationIntroduction. Installation- Keyboard Wedge
Introduction Installation- Keyboard Wedge 1) First of all, you must switch off power for the terminal/computer. 2) Disconnect the keyboard cable from the back of the terminal/computer. 3) Connect the appropriate
More informationNLS-EM3070. OEM Scan Engine. User Guide
NLS-EM3070 OEM Scan Engine User Guide Disclaimer 2013-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product and operate it according
More informationC O N F I G U R A T I O N G U I D E
C O N F I G U R A T I O N G U I D E Copyright @ 2013, This manual is copyrighted, with all right reserved. Under the copyright laws, this manual may not, in whole or in part, be copied, photocopied, reproduced,
More informationLIMITATION OF LIABILITY
FCC Compliance This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
More informationSCANNING MADE SIMPLE. EM3296 OEM scan engine user guide
SCANNING MADE SIMPLE EM3296 OEM scan engine user guide Disclaimer 2016-2017 Fujian Newland Auto-ID Tech. Co., Ltd. All rights reserved. Please read through the manual carefully before using the product
More information