Wireless Inspection Camera with recording LCD monitor. Product code: SRCAMV6 CAMERA NUMBER:

Transcription

1 User Manual Super Cam V6 SRCAMV6 Wireless Inspection Camera with recording LCD monitor. Product code: SRCAMV6 CAMERA NUMBER: Please read this user manual carefully before using this product.

2 CONTENTS Welcome... 1 Features... 1 Packing List... 1 Structure... 2 Installation... 3 Operation... 6 Basic Operation... 6 Other Operation and Settings for Monitor... 7 Recording Video... 7 Taking Photos... 8 Playing Video/Viewing Images... 9 Deleting Video/Images Deleting a Folder Language Setting Video System Setting Format Default Setup Viewing Version Information Frame Rate Setting Time Stamp Setting Recording Type Date/Time Setting Event Playback Specifications... 17

3 Welcome Thank you for choosing our inspection video camera and recordable LCD monitor. Please read the User Manual carefully before using this product. The product is designed as a remote inspection device. It can be used in tight spaces and relays real-time footage directly to the LCD monitor. The camera is able to both record video footage and capture still images. Typical applications might include HVAC inspection, automotive inspection, cable routing, boat/aircraft inspection, etc. Features 3.5 TFT-LCD palm LCD monitor with resolution of 960 x 240. The image head and the cable are water resistant when the unit is fully assembled, but the monitor and camera are not. The monitor can record video footage and take still images. A 2GB SD card is included. Packing List Checked By: Camera 9mm x 1 LCD Monitor x 1 Adapter for Video Output Cable x 1 AA Batteries x 4 monitor x 1 Optional USB Cable x 1 CD-ROM x 1 Magnet / Hook / Mirror Camera Collar 9mm Micro Bracket Rubber Ring x 1 SD Card -1-

4 Structure Camera Power Indicator Flexible Tube Power ON/OFF Signal Output Tthe hole for installing Installing the accessory Camera Lens and LEDs Monitor OK Up Menu Down Power ON/OFF Power Indicator USB Socket Video Output SD Card Socket Power Supply Socket Reset Signal Input -2-

5 AA AA AA AA Installation Please install the batteries tube and insert the SD card first before using product, and choose the accessory according to actual situation. Steps of installation as following Install Batteries 1. Using a screwdriver, remove screw and cover. 2. Remove battery compartment and insert four new AA batteries into the proper slots in the battery compartment. Proper battery orientation is indicated on the battery compartment. 3. Reinstall battery compartment and battery cover and screw as before. NOTE! Dry your hands before installation or replacing batteries. Install the Camera with Flexible Tube Connect the camera with tube to the body, make sure the keyed ends are properly aligned. Once they are aligned, finger tighten the knurled knob to hold the connection in place. -3-

6 Plugged to the socket Plug to the socket Plugged to the socket Fasten the knurled knob Fasten the knurled knob Installing Monitor for Wired Use Use Install Monitor for Wired Use The product also also supports supports wired wired use use by connecting by connect the the monitor monitor the to camera. The product also supports wired use by connect the monitor to camera. Slide the monitor Slide the downward monitor downward Installed successfully Installed successfully Installing Accessories To Install Accessory To The Install three accessories included Accessory accessories, included with (mirror, the camera hook (mirror, and hook magnet) and magnet) all attached to The the camera by the same way. To install as following: all attach three to included the camera accessories, in the same (mirror, way. To Install: hook and magnet) all attached to the camera by the same way. To install as following: Hook the hole Wear the rubber ring Hook the hole Wear the rubber ring the Bracket of Monitor Installing the bracket to the Monitor Install the Bracket of Monitor The bracket with magnet, it can absorption on any iron objects. Install The The bracket bracket is it to monitor with supplied a magnet, with a magnet as following it can that diagram: absorption the monitor on can any be iron attached objects. to. Install Install it it to to the monitor monitor as as per following the following diagram: diagram:

7 Inserting SD the Card SD Card After the the SD SD card card has was been inserted successfully into into the SD card socket, the following the screen symbol of monitor will be shown will appear on the monitor screen icon, otherwise ; otherwise, will it appear. will appear icon. Connecting the USB Cable Connect the USB cable to the monitor and the other end to a PC. The USB online icon will appear on the PC once successfully inserted. Open My Computer and locate the Mobile Disk. The video/picture files can then be copied/cut/played back directly from the SD card. SD card 3.5 Floppy Disk( A ) CD driver( G ) Mobile Disk( H ) NOTE! If the computer cannot play the video files correctly, please install the video player software from the CD-ROM. Charging the Monitor Connect the adapter to the monitor, whereby the power indicator will illuminate red, or similarly the battery capacity icon on the LCD monitor will flash. This indicates that the unit is on charge, and will turn off automatically once fully charged. Video Output Insert the video cable into the VIDEO OUT socket of the monitor. Insert the other end of the cable into the VIDEO IN jack of a TV or similar monitor. The LCD Monitor will output a high quality video. -5-

8 Operation OK OK Basic Operation Operation Basic Operation Basic Operation 1. Roll the ON/OFF switch to turn ON the camera, and the power indicator 1. Roll will light the ON/OFF up, The switch to then turn acts ON as the a camera, dimmer for and the the twin power LEDs indicator that 1. surround Roll will light the ON/OFF up, the The camera switch on to then turn imager ON acts the as camera, head a dimmer and whereby provide for the the twin lighting. power LEDs indicator that surround will illuminate. the camera The switch on then imager acts as a head dimmer and for provide the four lighting. LEDs that surround the camera head providing lighting where needed. ON OFF ON OFF ON OFF Twin LEDs provide Twin lighting LEDs provide lighting 2. Press and hold on the Power ON/OFF button of monitor for 2 seconds, and Press power and hold indicator the on power the will Power ON/OFF be green, ON/OFF button then button press the of monitor button for 2 for to seconds 2 select seconds until the, and CH4( the power channel indicator 4) turns and will the green, be picture green, then press then will display the press button button LCD to of select monitor select the CH4 and the press CH4( (Channel channel button 4) to display 4) to select and the the image recording picture on the will video LCD display monitor. or take pictures LCD Press of the monitor status: button and press to select the button recording to select video recording or taking pictures video or status take as pictures follows: status: Select to record video Select or take to pictures record video Select or take CH4 pictures Select CH Roll the ON/OFF switch on of the 3. Roll camera the for ON/OFF to dim/brighten better switch image the of light camera effect. produced for by better the four image LEDS. effect. ON OFF ON OFF The switch acts The as switch a dimmer acts as a dimmer

9 4. When in use, the flexible tube should be allowed to manoeuvre itself into position with ease going forward. Wireless Wired TIP! The flexible tube can be bent into the required shape. This may help you to explore areas that are more narrow than usual. 5. The accessories of the handheld inspection camera can be used to retrieve small items like dropped rings or screws. Further Operation and Settings for Monitor Recording Video 1. In the real-time monitoring status, press button to enter VIDEO status as following: Capacity of battery Current channel VIDEO icon CH4 Current date 2009/02/11 14:50:40 [00:45:43] SD card icon Time left -7-

10 2. Press OK button to record as following: Recording CH4 2009/02/11 [00:05:43] 14:50: /02/11 14:50:40 Recorded time Time stamp 3. Press OK button again to stop recording. NOTE! * The video will be automatically saved as a file every 30 minutes. * When the SD card is full the SD card icon will change to F. Taking photos 1. In the real-time monitoring status, press the button to switch to the photo status as following: Capacity of battery Current channel Photo icon CH4 Current date 2009/02/11 14:50:40 SD card icon 2. Press OK button to take a photo. NOTE! When the SD card icon changes to F it means that the SD card is full. -8-

11 Playing Video / Viewing Images 1. In the real-time monitoring status, press the button to enter into the following interface: PLAYBACK 0001/ Press or button to select the folder and press OK to enter: / :53:00 CH4 05:53:00 CH4 05:53:03 CH4 05:56:40 VID 05:59:03 CH4 06:05:17 VID Video file Picture file 3. For Video: Press or button to select the video function, then press OK to play as following: OK 2009/01/10 05:53:00 : -9-

12 Pause: Press OK button in playing status to pause, press again to resume. Fast Forward: Press button in playing status. Fast Backward: Press button in playing status. Stop/Exit: Press button. For Picture: Press or button to select picture, then press OK button to display. Press OK button again to exit. Deleting Video / Images 1. In the real-time monitoring status, press button once to enter the following interface: PLAYBACK 0001/ Press or button to select folder, then press OK button to enter the following interface: / :53:00 CH4 05:53:00 CH4 05:53:03 CH4 05:56:40 VID 05:59:03 CH4 06:05:17 VID -10-

13 3. Press or button to select the file, then press and hold the button for 2 seconds to enter the following interface: / :53:00 CH5 DELETE CURRENT FILE? 05:53:00 CH5 05:53:03 CH5 NO 05:56:40 CH5 05:59:03 CH5 YES 06:05:17 CH5 4. Press or button to select YES, then press OK button to confirm. Press NO to exit the current setup. Deleting a folder Deleting a folder is the same process as deleting a file, however make sure the folder is empty, otherwise the following warning interface will appear: PLAYBACK 0001/ FOLDER NOT EMPTY How to enter the Settings Mode In the real-time monitoring status, press and hold the button for about 1-2 seconds to enter the settings interface as follows: SYSTEM SETTING -11-

14 Language Setting 1. In the settings mode, press or button to select SYSTEM SETTING. Press OK to enter. 2. Press or button to select Language, press the OK button to enter the following interface: OK: English 3. Press or button to select the appropriate language. 4. Press OK button to confirm and exit. Video System Setting 1. In the settings mode, press or button to select SYSTEM SETTING. Press OK button to enter. 2. Press or button to select Video System. Press OK button to enter the following interface: NTSC Video system NTSC PAL OK NTSC 3. Press or button to select the right type. Press OK to confirm and exit. -12-

15 Format 1. In the settings mode, press or button to select SYSTEM SETTING. Press OK to enter. 2. Press or button to select Format. Press OK button to enter the following interface. FORMAT WILL ERASE ALL DATA ARE YOU SURE? NO YES 3. Press or button to select YES, then press OK to erase all data. Press NO to exit the setup. Default Setup 1. In the settings mode, press or button to select SYSTEM SETTING. Press OK button to enter. 2. Press or button to select Default Setup. Press OK button to enter the following interface: RESTORE DEFAULT ARE YOU SURE? NO YES 3. Press or button to select YES, then press OK to restore default. Press NO to exit the setup. -13-

16 Viewing Version Information 1. In the settings mode press or button to select SYSTEM SETTING, then press OK button to enter. 2. Press or button to select Version. Press OK button to enter and view the version of the product. Frame Rate Setting 1. In the settings mode, press or button to select RECORDER SETTING. Press OK button to enter. 2. Press or button to select Frame Rate. Press OK to enter the interface: Frame Rate Fps 30 FPS OK: 3. Press or button to select a suitable frame rate. 4. Press OK to confirm and exit. Time Stamp Setting 1. In the settings mode, press or button to select RECORDER SETTING. Press OK button to enter. 2. Press or button to select Time Stamp. Press OK button to enter the following interface: -14-

17 Time Stamp OK: off 3. Press or button to select either On or Off and press OK to confirm and exit. Recording Type 1. In the settings mode, press or button to select RECORDER SETTING. Press OK button to enter. 2. Press or button to select Recording Type. Press OK button to enter the following interface: Recording Type OK: VIDEO 3. Press or button to select STILL VIDEO. Press OK to confirm and exit. -15-

18 Date/Time Setting 1. In the settings mode, press or button to select Date/Time. Press OK button to enter the following interface: Date/Time 2009 / 02 / : 51 OK: 2. Press OK to select the Date or Time Press or button to modify Press button to confirm and exit Event Playback 1. In the settings mode, press or button to select EVENT PLAYBACK. Press OK button to enter. 2. For other operation, see Play Video/Picture Delete Video/Picture, Delete Folder section. FCC INFORMATION This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. -16-

19 Specifications Camera Monitor Model No. GB8803 Imaging Sensor CMOS Total Pixels 640 x 480 Horizontal View Angle 45 degrees Transmission Frequency 2468 MHz Minimum Illumination 0 lux Modulation Type FM Bandwidth 18 MHz Tube Diameter 9mm Power Supply 4 x AA Batteries Unobstructed Effective Range 10m Waterproof Capacity IP67 (only for imager head) Dimensions (W x D x H) 186 x 145 x 41mm (Excluding Flexible Tube) Weight (about) 450g Model No. GB7307 LCD Screen Type LCD 3.5 TFT-LCD Effective Pixels 320 (RGB) x 240 Video System PAL / NTSC Transmission Frequency 2414MHz, 2432MHz, 2450MHz, 2468MHz Exterior Supply Voltage Consumption Current (Max.) Charge Time Work Time 5V DC 500 ma 3 hours 2 hours Picture/Video Pixels 640 x 480 Video Size 27M byte /minute Frame Rate 30 frame/second Video Output Level V 75ohm Receiving Sensitivity -85dBm Dimensions (W x D x H) 100 x 70 x 25 mm Weight (about) 140g Operating Temperature -10 c ~ +50 c / 14 F ~ 122 F Operating Humidity 15% ~ 85%RH * Actual transmission range may vary according to the weather, location, interference and building construction. * All the specifications are subject to minor change without prior notice. -17-

20 ! CAUTIONS The apparatus shall not be exposed to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Turn off the Camera/Monitor if the system is not in use. The Camera/Monitor can only be completely disconnected from the mains by unplugging the adapter. Do not cut the DC power cable of the apparatus to fit with another power source. Attention should be drawn to the environment aspects of battery disposal. Remove the batteries when cleaning the unit. Remove the batteries before storing the unit for a long time. When necessary, REPLACE ALL FOUR BATTERIES in this unit with new ones. Use only the size and type of battery specified. Be sure to install the battery with the correct polarity as indicated in the battery compartment. EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. 22 Tel: +44 (0) sales@super-rod.co.uk Web: