Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
|
|
|
- Pamela Casey
- 5 years ago
- Views:
Transcription
1 Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance to side slip in excess of the full strength of the channels with which they are used. The extreme resistance to side slip results from the unique design of the alternate teeth, spaced and designed to develop a wedging action that increases with pressure or load. Screw Threads ll threaded products are merican Standard thread, free fit class 2. Thread 5/6 5/ / Threads per inch Torque (ft.-) Spring Nut Selector Chart Finish and special materials SPRING NUT 0-EGC 0-5/6EGC 0-EGC 0-EGC 0-0-EGC 0-5/6EGC 0-EGC 0-EGC H0-EGC H0-EGC CM0- CM0- CM0- CM0- UC0- UC0- UC0- CHNNEL SERIES - R - R C D E H Standard finish for all hardware is Electrogalvanized (EGC) or GoldGalv. Stainless Steel Type 36 is also available. Contact your Regional Sales Office for availability and minimum quantities.
2 Superstrut 0 Regular Spring Nut* 0 Short Spring Nut* 0-EGC 0-5/6EGC 5/6 0-EGC 0-EGC 2 0-5/EGC 5/ 0-0-/ / H0 Long Spring Nut* 0-EGC 0-5/6EGC 5/6 0-EGC 0-EGC H0-EGC H0-EGC 4 vailable in Stainless Steel 36. Nut is square over in. size. For all and C Series channel and inserts. For all and D Series channel and inserts. For all E and H Series channel and inserts. 0 Springless Nut in. thick C0 Springless Nut Heavy duty in. thick 3EG Springless Nut Light Duty 0-EGC 0-5/6EGC 5/6 0-EGC 0-EG 0-5/EG 5/ 0-EG C0-EGC C0-EGC C0-EGC C0-5/EGC 5/ C0-EGC Nut is square over in. size. For all, C, E and H Series channel and inserts. Nut is square over in. size. 2 to 5 Regular Spring Stud Nut* to Springless Stud Nut 2-x0EG 2-x25EG 4-x0EG 4-x25EG 5-x0EG 5-x25EG olt Length Dia For all and C Series channels. -x0eg -x25eg -x0eg -x25eg olt Length EG For Channel x 6 For attaching fixture to channel slot down or to channel slot up knockouts. Specify length. Hex nut included. CM0- CM0- * CM0-2 **CM0- UC0- UC0- UC0-2 GoldGalv only For all -5/ in. channel. *Will not fit Series channel. **For Series channel. GoldGalv only For all -5/ in. and - in. channels. May be used with LL Strut Depths. Can be used for CM0 Series, 0 Series, 0 Series and 0 Series. E45 Standard Hex Nut ES45 Swivel Nut and Jam Nut Combinations E45-EGC E45-EGC E45-EGC E45-5/EG E45-EGC E45-/EGC E45-EGC 5 2 Stud Nut UC0 Universal Nylon Cone Nut CM0 Nylon Cone Nut 3EG Dia / / ES45- ES Unhardened Square Nut / 2-2-/ / 2 / E46 Standard Square Nut E46-HDGC.3 E46-5/6HDGC 5/6.60 E46-HDGC 2.65 E46-5/HDGC 5/.0 *Supplied with a plastic sleeve over the spring portion to prevent tangling inside the carton. w w w. tnb.c a
3 E4 Flat Steel Washer EF4 Fender Washer E4 Lock Washer vailable in Stainless Steel. E4-EG 0.6 E4-5/6EG 5/6. E4-EG.4 E4-EG 3.5 E4-5/EG 5/.6 E4-EG. E4-/EG / 5.40 vailable in Stainless Steel. EF4-EGC - 5/6 3. EF4-EGC - /6 2. EF4-EGC 2 /6 5.0 vailable in Stainless Steel. E4-EG 0.26 E4-EG 0.50 E4-EG.0 E4-5/EG 5/ 2.5 E42 Hex Head Cap Screw E50S Lag olt E5 Coach Screw Rod vailable in Stainless Steel. E42-x0EG x.4 E42-x50EG x E42-x0EG x 4. E42-x50EG x E42-x0EG x.4 E42-x50EG x-.00 E42-x200EG x2. E42-x225EG x2-.0 E42-x250EG x E42-x25EG x Drill E50S-x-EG x- 5 E50S-x2EG x2 E50S-x2-EG x2- E50S-x3EG x3 E50S-x-EG /32 x- 2 E50S-x2EG /32 x2 3 E50S-x2-EG /32 x2-5 E50S-x3EG /32 x3 Rod Std Rod Lengths Machine threaded opposite end, carbon steel. E5-x4EG 4 E5-x6EG 6 4 E5-xEG 22 E5-xEG 2 E5-x2EG 2 35 E5-x4EG 4 E5-x6EG 6 22 E5-xEG 40 E5-xEG 5 H4 Hanger Rod Continuous Threaded H Rod Couplings Thread Wt./ 0 ft. Load H4-xEGC H4-xEGC 2 6 H4-xEGC H4-5/xEGC 5/ 5 H4-xEGC 23 2 H4-/xEG / H4-xEG lack available upon request Sold per foot; standard length, ft. lso available in stainless steel (36) standard length 6 ft. National coarse thread Rod /.0 5/6 / 3.5 -/ / 2-/ / Standard Rod Coupling Example: H-EG Order by product number, rod size, and finish. vailable in Stainless Steel. Rod to to to 5/ / to to / Rod Reducer Coupling Example: H-xEG
4 H22 Trapnut TM Strut Fastener Load H H H 22 0 H 22 EG 50 H 22 EG 50 H 22 EG 0 H 22 SS6 50 Finishes: Electrogalvanized (EG), GoldGalv, Stainless Steel Type 36 (SS6) Std. Ctn. 50 M Eye Socket E Rod Pipe E -/ / / / / / / 2-/ MX OLT SIZE Standard Finishes - are (), Electrogalvanized (EG) Malleable iron. For attaching hanger rod to various types of hangers and beam clamps. Order by product number, rod size, and finish. Example: M- Complies with Specification MSS SP6, Type 6. E20 Swivel Joint E20 Weldless Eye Nut Standard Finish - are () Drop Forged Steel. For use on high temperature piping installations. Order by product number and rod size. Example: E20- E E Rod C D E F T / 5/ / 5/ / / - -5/ -5/6 3-5/ / -5/6 3-5/ E22 Swivel Joint E30 Swivel Joint E3 Swivel Joint E E E E E E
5 C Square Washer Rod Hole Overall Dimensions C-* /6 3x3x3/6 2 C-* /6 3 x 3 x 3/6 2 C-5/* 5/ /6 3x3x 4 C-* 3/6 3 x3x 42 C-/* / 5/6 4x4x 5 C-* -/ 4x4x 60 *Finishes HDG EG SS6 Used for beam applications. For channel applications use 24. H5 Standard U-olt Pipe C D E Standard Finishes - Electrogalvanized (EG), GoldGalv, Stainless Steel or are () Example: H5-EG s through 4 in. furnished with one hex nut per leg. s 5 in. and above furnished with two hex nuts per leg. Order by, pipe size, finish. Complies with Specification MSS SP6, Type 24. 5/ / - -5/ 3-/ / -5/ 3-5/ / / / /6 2-/6 -/ 4-/ /6 2-/6-3/6 5-/ /6 2-5-/ / /32 6-3/ / /32 6-5/ / 3 2-/32-5/ /6 5/ -/ /6 5/ 2-/ / / / 4-3- / 6-5/
Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.
Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
180 Olcott St Manchester, CT USA Local Fax Empire Industries, Inc.
EMPIRE I N D U S T R I E S I N C. Empire Industries Inc. is proud to present its new Engineering Catalog, Number 00. This catalog contains a complete line of pipe hangers, supports and related products.
T-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
Please Note: Special Size Standoffs to Order P.O.A
SECTION 2: GLASS FIXINGS INDEX Product Page Uncovered Counter Sunk Bushes - Black or White 2.1 Covered Counter Sunk Bushes - 304SSS Cap 2.2 Anchor Spanner 2.3 Button Head Fixings 2.4 Button Heads, Spacers,
Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
Price Book - Section H Hangers
Effective Date Price Book - Erico CPVC Hanger - One Hole Strap - #07 00 /4" 9060 $.05 00 " 906 $.5 00 /4" 9062 $.5 00 /2" 906 $.20 00 2" 9064 $.5 CPVC Hanger - Two Hole Strap - #08 00 /4" 9065 $.5 00 "
SOLARMOUNT PART & ASSEMBLY BONDING CLAMPS 9/27/2017
SM-A01 PRO SERIES END CLAMP PRO SERIES MID CLAMP 1 7 16" 11 16 " 11 16 " 1 1 2" 1" 30mm to 51mm MODULE FRAME 302035M 302030M 302030D ENDCLAMP PRO MIDCLAMP PRO - MILL MIDCLAMP PRO - DRK MID CLAMP END CLAMP
U.S. Price List and Part Selector Guide
TJC-L-207-022 Effective Date 02-2-207 (Supercedes Previous Versions) U.S. Price List and Part Selector Guide Price in U.S. Dollars AICKINSTRUT CHANNEL FRAMING - TYPES P (GRAY), V (BEIGE) AND E (GRAY) PRICE/LF
ASSEMBLY ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
ASSEMBLY ASSEMBLY INSTRUCTIONS INSTRUCTIONS ASSEMBLY INSTRUCTIONS VOX INFINITY L-SHAPE 7230 DESK Workstations, WORKSTATIONS, desks, DESKS, AND and TABLES tables WITH with POWERED powered ADJUSTMENT adjustment
AIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
HARDWARE KITS. Call in NY or Fax Outside the NY area, JCP. HARDWARE A F JCP
112 KITS 29601-000 10-229602-000 12-10 0166-015 12-100166-016 12-10 12-860331-A 0166-031 12-100166-032 12-15 230000-001 11-23001-001 11-23002-0 12-860331-B 12-860331-C 12-860331-D 12-860331-E 12-860331-F
Sensor Accessories Retroreflectors and Retroreflective Tape 8-2
-2 Retroreflectors and Retroreflective Tape PG.05E.17.T.E Retroreflectors ontents Overview.................... -2 Model Selection............... -3 Dimensions.................. -3 High Quality Retroreflectors
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
FIXPOINTS PICTORIAL INDEX
Cable Support Systems 149 FIXPOINTS PICTORIA INDEX FASTENERS AND CONNECTORS HN Hexagon Nuts [/] FW Flat Washers [/]. Dia. HN06 HN06H M6 0.15 100 HN08 HN08H M8 0.46 100 HN10 HN10H M10 0.75 100 HN12 HN12H
FULL COLOR TAB #7 MSE, MSR
FULL COLOR TAB #7 MSE, MSR 117 MS - How to Order FORCE MULTIPLYING CYLINDERS SERIES MS : MULTI-STAGE The TRD MSE and MSR Series are double acting, single rod end cylinders that multiply the force output
Parts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
STANDS Speaker Television. All-Steel Speaker Stand SS7725B (page 82)
STANDS Speaker Television SS8800B+ Power Crank-Up Speaker Stand 80 (page 82) All-Steel Speaker Stand SS7725B 1 2 4 7 1 Cl assic Speaker Stand SS7730B 1 0 6 4 9 Upper Shaft Tubing: 1.375"or 1.5" Upper Shaft
Section 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
Clamps Telescopic Hanger Clamps Accept no limits to luminaire suspension & positioning.
2.0 2 Clamps ARRI s extensive range of clamps is a perfect complement to the lighting stands. The high quality of construction leads to maximum durability and reliability in any application. Ongoing improvements
WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
Marketed and Distributed by: Absolute Distribution, Inc. Ph: Fax
262 Series Outside of Post to Outside of Post Rail Kit - Wood Post Cable Railing Kit, made in USA from high quality 1/8 316 stainless steel includes cable w/swage, applicable washers, Invisiware receiver,
INSTALLATION GUIDE 02-ES ESTC
02-ES7341-47 01-140316-01 01-140251-01 01-140162-01 01-140296-01 01-140220-01 01-ESTC01-02 01-140305-01 3.0mm Galvanised Fixed Strap M8 x 35mm Broaching Stud Z/P M8 x 25mm x 1.6mm washer Z/P M8 Nylon Insert
Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Return flanged, perforated tray 50MM 75MM 100MM 150MM 225MM 300MM 450MM
Steel Cable Tray Light Duty Cable Tray Medium Duty Tray Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Single flanged, perforated tray Hot dipped, galvanised steel (pre-galvanised)
1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
Installation Guide Philips MP60/70 IntelliVue VHM Arm Rail Mount Kit
Installation Guide Philips MP60/70 IntelliVue VHM Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter (page 2) 2. Describe attachment of Down
YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
MBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
TILBURY STEEL SERVICE CENTRE
TILBURY STEEL SERVICE CENTRE 159 Queen Street North Tilbury, ON, N0P 2L0 Voice: 519-682-0000 Toll-Free: 1-800-565-1077 Fax: 519-682-0004 Email: tsales@tilburysteel.com STOCK BOOK & REFERENCE GUIDE Tilbury
Framework for Cable Railing
Cable Railing Overview Cable Railing for Wood Railing Systems Framework for Cable Railing Guidelines for proper installation of the ADI cable railing system by Ultra-tec required For level runs: 224 Series
Plumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
![AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]](/thumbs/79/79067902.jpg "AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]")
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
Rider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA
AMP TM Parts Manual Rider Model 900 -In. S.D. Deck 0800 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
Required Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
SADDLES & SNAP-ON SADDLES
SADDES & SAP-O SADDES When Assembling Spears Saddles to PVC pipe, Spears anufacturing Company recommends Spears PVC-19 Solvent Cement and Spears Primer-68/Primer-70 or equivalent. Although good connections
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
RD 100. Spare parts list. RD 100 s/n BES Construction Tools PC AB No
RD 100 Spare parts list RD 100 s/n BES100496 2018 Construction Tools PC AB No. 9800153901 2018-10 General information This spare parts list applies to the following: Part number 8311030410 RD 100 Description
T E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
Manufactured in the USA. Cushioning & Clamping Products
Manufactured in the US ushioning & lamping Products U-olt Series U.S. PTNT NO. 4,934,635 4,997,148 5,014,9 esigned for the tough jobs, the U-olt Series secures pipe runs to any flat surface. Provides total
Rear-Engine Riders Parts Manual
Rear-Engine Riders Parts Manual Models 06 - RM0 0 - RM0 0 - RM00 0 - RM 06 - RM0 06 - RM0 0 - RM 0 - RM 0 - RM0 0600B /0 Supercedes 0600,A Printed in USA THE MANUAL Before you operate your unit, carefully
RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols
/2.9 Gear Pump Model G2 (Series X For Flange Mounting with SE threaded Ports s to 22... 6 PSI (2 bar....7 in /rev. (22. cm /rev. /2.9 eplaces: 2.92 New principle of sealing the pump body, increases service
INSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
Fixings for Mobile Radio Base Stations
Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of
Arlington Industries, Inc.
800/233-4717 FX 570/562-0646 rlington Industries, Inc. LEWY able Runway Support System able support system for either power or low voltage cable. For new construction or retrofit. Non-metallic. T205 New!
Flamco Mounting products
M O U N T I N G P R O U C T S 8 Flamco Mounting products K BALL AN HINGE JOINT VG ANGULAR PLATE KCL PROFILE CLAMP GP MOUNTING PLATE BMG ASSEMBLY STRIP Edition 2007 / UK Mounting products The best flexible
lindab duct suspension & support system Duct suspensions & Support systems
Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets
Assembly and Setup Manual
M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/c-11 series. To the Customer Specialized techniques are required
Channels and Bracketery
Channels and Bracketery Channel Sections and Cantilever Arms CSS1/ CSS1/ CSS1/ CSS1/ CSS1 CSS1 CS1/ CS1/ CS1/-HDG CS1/-SS CS1/ CS1/ CS1/-HDG CS1/-HDG CS1/-SS CSL1 Material thickness: 1.mm Weight: 1.1 kg/m
Trigonometry Tables and Handy References for Engineers
$1 Trigonometry Tables and Handy References for Engineers No matter what angle you figure... Carr Lane is your best answer for jig-and-fixture components! AUTHORIZED DISTRIBUTOR A-L Tool Supply P.O. Box
Spacebar. Modular Microphone Positioning System. User Manual, Revision C, August, Spacebar Modular System User Manual Revision C Page 1 of 29
Spacebar Modular Microphone Positioning System User Manual, Revision C, August, 010 Spacebar Modular System User Manual Revision C Page 1 of 9 Table of Contents Standard pre-configured arrays:... 4 SB-SUR
Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
FLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
Flareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
BOLTS & SET SCREWS M6 SET SCREWS & BOLTS M12 SET SCREWS AND BOLTS M8 SET SCREWS AND BOLTS. All the fixings. listed here. are Grade 8.
BOLTS & SET SCREWS Page updated 171120 Flints stocks a wide range of bolts and set screws. The most popular sizes are listed here. Our distributor holds thousands of tons of stock so if you can t find
72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
T E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
EVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD
600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series 800 Vertical
Advantages: With only 3 sizes covers 80% of pipe sizes. Fast installation. Can also being installed in channels. Fix on the nailer nose. 2 sec.
ABT Pipe Clamp With only sizes covers 80% of pipe sizes. Fast installation. Can also being installed in channels. Compatible with TrakIt, Würth, Spit and others 5 sec. APPROVAL Ready to clip. 4 PATENTED
Cable Railing Overview. Framework for Cable Railing
Cable Railing Overview Cable Railing for Wood Railing Systems Framework for Cable Railing Guidelines for proper installation of the ADI cable railing system by Ultra-tec Use minimum 4x4 wood posts. Top
Classic Collet Knobs. Standard Product Variety. Introduction. Possible Customization
Precise quality knobs Secure collet mounting Wide variety Lots of accessories Custom colors on request Standard Product Variety to mm knob size Shaft diameter: mm to ¼" Glossy or matt surface or gray knob
Table of Contents: TOPIC: Safe Operation: READ THIS FIRST Page: 3 Warranty 4 Specifications 4 Installation 5-7 Operating Instructions 8 Parts Diagram
INSTALLATION & OPERATIONS MANUAL FlexArm B-19 FlexArm Inc. Division of Midwest Specialties, Inc. 851 Industrial Drive Wapakoneta, Ohio 45895 419-738-8147 Book Part No 360740 12/2014 1 Table of Contents:
Smartpak Hardware, Little Brother of Maxpac
HD17S Glass Plates Quantity Boxed 20918S Slotted Electro Brassed 32mm (1.1/4") 4 10 22119S Slotted Chrome Plated 32mm (1.1/4") 4 10 20918S 22119S 20266S Round Electro Brassed 19mm (3/4") 4 10 20919S Round
STAHLWILLE spanners. STAHLWILLE spanners
STAHLWILLE spanners Conventional spanners When force is applied to a spanner, the greatest force acts on the joint between the jaw and the shaft. Standard-quality open-jaw spanners do not take this fact
Channel,Half Slot,10ft
printed April 25, 2009 Channel,Half Slot,10ft Half Slot Channel, Length 10 Ft, Width 1 5/8 In, Depth 13/16 In, Cold Formed, Steel, 9/16 X 1 1/8 In Slot, Pregalvanized, 14 Gauge Grainger Item # 5YB80 Price
WELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
security fasteners for every application
security fasteners for every application Welcome to Hafren 2 Specifying & Ordering Hafren Security Fasteners 5 2-Hole Screws 6 Pin Hex Screws 8 6-Lobe Pin Screws 10 6-Lobe Pin Self Drilling Screws 12 6-Lobe
HDPE TECHNICAL INFORMATION
HP THNIL INFORMTION MULTIPLIR The following standard PowerSeal products have been evaluated and approved for use with high density polyethylene pipe based upon certain modifications and restrictions related
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds - 1018...9, 10 Rounds - 1045...10
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
Metric Star Coupling (Plastic "Star" Ring)
Metric Star oupling (Plastic "Star" Ring) H H Finished ore* H H d d Series Max. Max. F / / / 0 7 H Small Hub M 0 H Large Hub M N S L R 0. 7 0 7. / / /0 0 0 0 7 7 0. 0. 0 / /7 7/0 7 7 0 7 0 0 0. 0 Series
Parts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
Spray Gun Kit Multi-Pro 1200/1250 Turf Sprayer and Workman 200 Spray System
Form Number 3352-887 Spray Gun Kit Multi-Pro 1200/1250 Turf Sprayer and Workman 200 Spray System Model No. 41133-250000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please
Pronto Air Personal Transporter
Parts Catalog Issued: Sep 20, 2018 Pronto Air Personal Transporter with MyBody Seating Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog
serial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
Ground Power Modules. And Accessories For Healthcare Facilities. Technical Bulletin NAE /
2 Ground Power Modules And Accessories For Healthcare Facilities Technical Bulletin NAE2092320 / 10.2011 Ground Power Modules Hospital grade outlet modules Introduction BENDER series GPM ground and power
Turbo Fiberglass Cone Fan and Grill Fan 36 Direct Drive. Installation & Operator s Instruction Manual
Turbo Fiberglass Cone Fan and Grill Fan 36 Direct Drive Installation & Operator s Instruction Manual July 1998 MV1384B Chore-Time TURBO TM Fan Extended Warranty Chore-Time Equipment warrants new TURBO
Standard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
Limited Warranty And Exclusive Remedy
Limited Warranty And Exclusive Remedy THE WORLD LEADER Deepak Fasteners Ltd., through its Unbrako Division and associated companies, warrants that these products conform to industry standards specified
Assembly and Setup Manual
M-12 Series Copyboard / C-12 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-12 series Copyboard and C-12 series Captureboard. (The copyboard and/or
LaserLyte-Flex Red & Green Alignment System
LaserLyte-Flex Red & Green Alignment System LaserLyte-Flex The LaserLyte-Flex is an entry-level laser alignment system. It uses interchangeable optics and a semiconductor laser diode to project a highly
Accessories for all your hose needs
Aeroquip hose assembly master catalog Accessories for all your hose needs Accessories Protective coils, s coil spring.... -2 coil... -2 900952 Plastic coil spring... -2 222005 Stainless steel internal