PARTS DESCRIPTION LISTING

Transcription

1

2

3 PARTS DESCRIPTION LISTING Form 4-157e, Sheet 2 of 6 Index No. Part Number Description A TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) B COVER, ASSEMBLY BACK DSP600 (See Sheet 5) C PPP POST, TWO CAMERA UPPER WELD (See Sheet 3) D CARIER, TWO CAMERA - ML (See Sheet 4) E SENSOR, HS200 RIGHT CAMERA ASSEMBLY (See Sheet 5) OR SENSOR, HS201 RIGHT CAMERA IBIS (See Sheet 5) F SENSOR, HS200 LEFT CAMERA ASSEMBLY (See Sheet 5) OR SENSOR, HS201 LEFT CAMERA IBIS (See Sheet 5) G SUPPORT, DUAL POSITION, ADAPTOR MOUNT (See Sheet 3) H ADAPTOR, 10 INCH 24 INCH DSP600/400 (Refer to form 4-110) I TARGET ASSEMBLY, REAR PLASTIC RIGHT-HAND (See Sheet 6) J TARGET ASSEMBLY, REAR, PLASTIC LEFT-HAND (See Sheet 6) K TARGET ASSEMBLY, FRONT, PLASTIC RIGHT-HAND (See Sheet 6) L TARGET ASSEMBLY, FRONT, PLASTIC LEFT-HAND (See Sheet 6) PPP-Paint Code Required A/R-As Required REF-Reference HUNTER DRIVE BRIDGETON, MO 63044

4

5 PARTS DESCRIPTION LISTING Form 4-157e, Sheet 3 of 6 Index No. Part Number Description Qty PPP POST, TWO CAMERA UPPER WELD POST, TWO CAMERA LOWER (Consisting Of:) PPP POST, TWO CAMERA LOWER WELD CABLE, TWO CAMERA ML KNOB, CARRIER COUNTER BALANCE CM PLUG, FRICTION COUNTER BALANCE CM SOCKET BUTTON HEAD CAP SCREW 5/16-18 X 1.00 INCH FULL-THREAD WASHER, FLAT 5/16 INCH ADHESIVE, THREAD LOCKING A/R TIE, CABLE (Not Illustrated) WEIGHT, HS ML NAMEPLATE, HUNTER MODEL & PART (Not Illustrated) NAMEPLATE, PATENT LABEL (Not Illustrated) KIT, TWO CAMERA ML HARDWARE (Consisting Of:) (Not Illustrated.) TRUSS HEAD MACHINE SCREW X.75 INCH HEX HEAD CAP SCREW 1/2-13 X 1.25 INCH GRADE 5, FULL-THREAD SOCKET BUTTON HEAD CAP SCREW 5/16-18 X 1.00 INCH, FULL-THREAD SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH SCREW, SELF-TAPPING X.75 INCH FOOT, PLASTIC BOLT, ANCHOR 1/2 X 3 3/4 INCH NUT, TINNERMAN U-TYPE # COVER, COLUMN TWO CAMERA ML TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) CARIER, TWO CAMERA-ML (See Sheet 4) HAWKEYE, ADAPTOR-SUPPORT, LIFT-MOUNT (Consisting Of:) (Not Illus.) FOOT, 1/4 INCH RUBBER 1.25 INCH DIAMETER (For Lift Mnt.) (Not Illus.) NUT, GRIP 1/4-20 (For Lift Mnt.) (Not Illus.) HEX HEAD CAP SCREW, 1/4-20X1.25 INCH GRADE 5 (For Lift Mnt.) (Not Illus.) NUT, 1/4-20 RECTANGULAR (For Lift Mnt.) (Not Illus.) SCREW, SELF-TAPPING 10-32X.75 INCH SUPPORT, DUAL POSITION-ADAPTOR MOUNT (Consisting Of:) SUPPORT, DUAL POSITION MOUNT FOOT, 1/4 INCH RUBBER 1.25 INCH DIAMETER FLAT HEAD SOCKET CAP SCREW X 1.00 INCH NUT-KEPS SLEEVE, RECTANGLAR 10 GAUGE 2 PPP-Paint Code Required A/R-As Required REF-Reference HUNTER DRIVE BRIDGETON, MO 63044

6

7 PARTS DESCRIPTION LISTING Form 4-157e, Sheet 4 of 6 Index No. Part Number Description Qty CARIER, TWO CAMERA ML (Consisting Of:) CARIER, TWO CAMERA-FRONT BRACKET, DUAL-ROLLER (Consisting Of:) BRACKET, DUAL-ROLLER-MOUNT NUT, GRIP 1/ SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.50 INCH WASHER, FLAT 1/4 INCH BUSHING, 3/8 ID X 1/2 OD X 3/4 INCH LONG ROLLER, REAR CONSOLE MT SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH NUT, KEPS 1/ SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH PIN, DOWEL BUSHING, 3/8 ID X 1/2 OD X 3/4 INCH LONG ROLLER, REAR CONSOLE MOUNT WASHER, FLAT 1/4 INCH BLOCK, SHEAVE UPPER PULLEY CM CARIER, TWO CAMERA-REAR SCREW, SELF-TAPPING 8-32X.38 INCH CARIER, TWO CAMERA-COVER-MOUNT KIT, TWO CAMERA ML HARDWARE (Consisting Of:) (Not Illustrated) BLOCK, SHEAVE UPPER PULLEY CM PIN, DOWELL.25 X 1.00 INCH PULLEY, WIRE ROPE, CM SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH NUT, KEPS 1/ SOCKET BUTTON HEAD CAP SCREW 1/4-20 X 1.00 INCH NUT, KEPS 1/ WASHER, FLAT 1/4 INCH SOCKET BUTTON HEAD CAP SCREW 1/4-20 X.50 INCH BRACKET, HUB MOUNT CLAMP, P CLIP 3/8 INCH ID RUBBER NUT, GRIP 1/ ROUND HEAD MACHINE SCREW 4-40X.38 INCH (For HS200ML Only) NUT, HEX 4-40 (For HS200ML Only) CABLE, HS400FC CAMERA CONTROL TO BURNDY (For HS200ML Only) CABLE ASSEMBLY, SHIELDED SENSOR (For HS200ML Only) CABLE, TWO CAMERA ML REF SELF-TAPPING SCREW 8-32 X 3/8 INCH (Not Illus.) (For HS201ML Only) BOX, USB HUB BOARD ASM (For HS201ML Only) BOX, ASSEMBY USB HUB (For HS201ML Only) LID, ASSEMBY USB HUB (For HS201ML Only) PCA, VCS USB2 HUB (For HS201ML Only) SELF-TAPPING SCREW 8-32 X 3/8 INCH (For HS201ML Only) ROUND HEAD MACHINE SCREW 6-32 X.31 INCH (For HS201ML Only) ROUND HEAD MACHINE SCREW 4-40 X 1.50 INCH LG (For HS201ML Only) CABLE, USB 2.0 A/B 2 METER (Not Illustrated) (For HS201ML Only) REF WIRE ASSEMBY, DSP600L EMITTER PWR (Not Illustrated) (For HS201ML Only) REF CABLE ASSEMBY, USB+BURNDY (For HS201ML Only) 1 PPP-Paint Code Required A/R-As Required REF-Reference HUNTER DRIVE BRIDGETON, MO 63044

8

9 PARTS DESCRIPTION LISTING Form 4-157e, Sheet 5 of 6 Index No. Part Number Description HS200 (per side) HS201 (per side) SENSOR, HS200 RIGHT CAMERA IBIS (Consisting Of:) 1 OR SENSOR, HS200 LEFT CAMERA IBIS (Consisting Of:) (Not Illustrated) 1 OR SENSOR, HS201 RIGHT CAMERA IBIS (Consisting Of:) (Not Illustrated) 1 OR SENSOR, HS201 LEFT CAMERA IBIS (Consisting Of:) (Not Illustrated) TRANSDUCER, DSP600 FRONT IBIS (Includes:) WIRE ASSEMBLY, DSP600 EMITTER BOARD PCA, DSP NM EMITTER SMT SCREW. SELF-TAPPING 4-40 X 1/4 INCH BRACKET, 2 CAMERA SUPPORT RIGHT ASSEMBLY 1 1 OR BRACKET, 2 CAMERA SUPPORT LEFT ASSEMBLY (Not Illustrated) SCREW, SELF TAPPING 8-32 TRILOB BLOCK CAMERA MOUNT HS HEX HEAD CAP SCREW 1/4-20 x.38 INCH, FULL-THREAD SCREW, SELF TAPPING 6-32 x 3/8 INCH GASKET, CAMERA BOARD (For HS200 Only) PCA, HS400 CAMERA CONTROL (For HS200 Only) 1 OR PCA, USB2 CAMERA INTERFACE (For HS201 Only) CONNECTOR.1 2 CIRCUIT JUMPER (Not Illustrated) (For HS200 Only) CABLE, HS400 CAMERA CONTROL TO EMMITER POWER (For HS200 Only) NAMEPLATE, PATENT LABEL (Not Illustrated) NAMEPLATE, HUNTER MODEL AND PART (Not Illustrated) CABLE, HS400 CAMERA CONTROL TO CAMERA CONTROL (HS200ML Only) 1 AND CABLE, HS400FC CAMERA CONTROL TO BURNDY (Not Illus.) (HS200ML Only) REF. OR CABLE, USB 2.0 A/B 2METER (Not Illus.) (HS201ML Only) 1 AND WIRE ASSEEMBLY, DSP600L EMITTER POWER (Not Illus.) (HS201ML Only) CABLE ASSEMBLY, SHIELDED SENSOR (See Sheet 4) (Not Illus.) (HS200ML Only) REF. OR CABLE ASSEMBLY, USB+BURNDY (See Sheet 4) (Not Illus.) (HS201ML Only) REF COVER, CAMERA DSP COVER, CAMERA CLEVIS DSP COVER, ASSEMBLY BACK DSP600 (Consisting Of:) COVER, CAMERA BACK DSP COVER, CAMERA PLATE SCREW, SELF-TAPPING 6-32 X.25 INCH KIT, TWO CAMERA MANUAL LIFT HARDWARE (Consisting Of:) (Not Illustrated) PAN HEAD MACHINE SCREW 8-32 X 3/4 INCH SCREW, SELF-TAPPING 8-32 X.50 INCH SHIELD, FRONT COVER DSP SCREW, SELF-TAPPING 6-32 X.25 INCH TUBE ASSEMBLY, CAMERA SUPPORT CM (Consisting Of:) TUBE ASSEMBLY, CAMERA SUPPORT CM COUPLER, CAMERA DSP600 WELD HEX HEAD CAP SCREW 3/8-16 X.75 INCH, FULL-THREAD WASHER, FLAT 3/8 INCH, SPECIAL HEX HEAD CAP SCREW 1/4-20 X.50 INCH FULL-THREAD WASHER, FLAT 1/4 INCH SOCKET SET SCREW 1/4-20 X 3/4 INCH, OVAL POINT HEX HEAD CAP SCREW 1/4-20 X.75 INCH, FULL-THREAD 2 PPP-Paint Code Required A/R-As Required REF-Reference HUNTER DRIVE BRIDGETON, MO 63044

10

11 PARTS DESCRIPTION LISTING Form 4-157e, Sheet 6 of 6 Index No. Part Number Description Front Targets Rear Targets TARGET ASSEMBLY, FRONT PLASTIC LH (Consisting Of:) 1 OR TARGET ASSEMBLY, FRONT PLASTIC RH (Not Illustrated) TARGET ASSEMBLY, REAR PLASTIC RH (Consisting Of:) 1 0R TARGET ASSEMBLY, REAR PLASTIC LH (Not Illustrated) HOUSING-FRONT WITH BUMPER HOUSING-REAR WITH BUMPER SHAFT, DSP600 TARGET WASHER, FLAT 3/8 INCH NUT, JAM 3/ PLATE, BACKUP FRONT PLATE, BACKUP REAR FLAT HEAD SHEET METAL SCREW X.5 INCH TARGET ASSEMBLY, FRONT TARGET ASSEMBLY, REAR WASHER, SPRING CURVED # NUT, LOCK NYLON INSERT HOUSING, LEVEL TARGET DECAL, DSP400 TARGET WARNING (Not Illustrated) TOOL LEVEL, DSP400 TARGET 1 1 PPP-Paint Code Required A/R-As Required REF-Reference HUNTER DRIVE BRIDGETON, MO 63044