A total of two pcs.: One each. receiver E39-F5 1 E32-TC200A E32-C42 E39-F3A 1 E32-D32 E32-EC41 E39-F3A-5 1 E32-EC31 E32-EC41 E39-F3B 1 E32-EC31

Transcription

1 Accessories for ens Unit Shape Quantity Applicable Fiber Reflectors Increased sensing Conversion of detection direction into side view Conversion of through-beam model into long reflective model Conversion of through-beam model into side view reflective model Detection at 0.1 to 0.6 mm dia. small spot Detection at 0.5 to 1 mm dia. small spot 7 mm Detection at 0.1 mm dia. spot Detection at 0.5 mm dia. spot in 7 mm focal length 17 mm focal length Detection at 0.2 mm dia. spot 17 mm focal length Detection at 0.5 mm dia. spot Short body for space-saving, max. 4 mm dia. spot in long 20 mm ong lens units E39-F1 side view unit E39-F2 ensequipped reflective Unit Reflective side view conversion attachment Small spot lens unit (variable) Small spot lens unit (fixed) ong /small spot lens unit (fixed) ong lens unit (fixed) ong lens unit E39-F3 A total of two pcs.: One each for emitter and receiver One set -T11 -TC200 - T11R -T11 -T61-S -T1R-S E39-F5 1 -TC200A E39-F3A 1 E39-F3A-5 1 E39-F3B 1 E39-F3C 1 E39-F1V 2 -C42 (3 mm dia.) -D32 (3 mm dia.) -EC41 -EC31 -EC41 -EC31 E39-EC31 -EC41 -T51V and -T54V Beam spot characteristic E39-F3A+-C42 Shape Sensing (default) Quantity Remarks Focal d (mm) Focal d (mm) Fiber -C42 l l: length d: Focal 0.0 d : Spot diameter (mm) Beam spot characteristic E39-F3A+-D32 Fiber -D32 l d l: length d: Focal length l (mm) : Spot diameter (mm) length l (mm) Reflectors 1.5 m (150 mm) * E39-R1 1 Retroreflective model attached to -R16. Small reflector 250 mm (25 mm) * E39-R3 1 Retroreflective model attached to -R21. A-245

2 * Values in parentheses indicate the minimum required between the sensor and reflector. Mounting Brackets Shape Applicable Quantity Remarks E3X-DA-N series E3X-DA#V E E T16 E39-4 1* Attached to the product. -T16P E Operating Instructions Sticker E39-Y1 End Plate Remarks Apply this seal to near the sensor. Shape Quantity PFP-M 1 -T54V E39-54V * For the through-beam, please order two pcs. for the emitter and receiver. Note: For details, refer to "Mounting bracket list". Protective Spiral Tubes Shape Tube length Applicable Fiber E39-F32A5 500 mm -DC200E -D21 -DC200F(4) E39-F32A 1 m -D21R E39-F32B5 500 mm -T21 -TC200F(4) -TC200E E39-F32B 1 m -T21 -EC31 -T21R For protection of fiber E39-F32C5 E39-F32C 500 mm 1 m -T11 -T11 -TC200 -T51 -TC200B(4) -T11R E39-F32D5 E39-F32D 500 mm 1 m -D11 -D11 -DC200 -CC200 -DC200B(4) -ED51 -ED11R Other Accessories Shape Applicable Fiber Remarks Used for free cutting of fiber Fiber Cutter E39-F4 All fiber unit models that enable free cut Attached to the fibers that can be cut freely. Attachments for small diameter fibers for insertion into amplifier Attachments for small diameter fibers E39-F9 -T21 -DC200E -T22 -DC200F(4) -TC200E -D33 -T22 -ED21R -T22R -D21 -TC200F(4) -D32 -T21 -D24 -T24 -D24R -T24R -R21 -D21 -EC31 -ED21R -A03 -D22 -A04 -D22R --- Used for adding to fiber Fiber Connector E39-F10 -T11 -T14 -T -G14 -T17 -D11 -TC200 -DC200 -TC200A -DC200B(4) -TC200B(4) -D14 -T14 -D --- Used for bending the sleeve of sleeved fiber Sleeve Bender E39-F11 -TC200B(4) -TC200F(4) -DC200F(4) --- Prevention of fiber unit mounting section from breakage Protective Attachment E39-K2 -T61-S -T4S Example E-39-K2 -T4S A-246 Advanced Photoelectric s

3 Rating/Performance ens Unit ong lens units Increased sensing E39-F1 Through-beam Item Applicable Fiber -T11 -TC200 -T61 -T11 -ET11R -T1R-S E3X-DA-N Standard sensing object 4,000 mm 4,000 mm * 4,000 mm * 4,000 mm * 4,000 mm * 2,600 mm Standard 3,200 mm 4,000 mm * 3,400 mm 3,600 mm 3,700 mm 2,100 mm Directional angle 5 to 40 1,200 mm 2,100 mm 1,300 mm 1,300 mm 1,400 mm 750 mm Opaque: 4 mm dia. min. Differential --- Ambient temperature Tube: ens Use the unit within the operating temperature range of the fiber used. When used with -T61-S, use the unit within the range -40 to +200 C. Brass Optical glass * These models allow a longer sensing because their optical fiber length is 2 m. side view unit Conversion of detection direction into side view E39-F2 Through-beam Item Applicable Fiber -T11 -TC200 -T61-S -T11 -ET11R -T1R-S E3X-DA-N Standard sensing object 900 mm 00 mm 570 mm 70 mm 500 mm 350 mm Standard 00 mm 700 mm 450 mm 660 mm 400 mm 20 mm Sensing Superlong- Superhigh-speed Sensing Superlong- Superhigh-speed Directional angle 20 to 60 Ambient temperature Tube: ens 400 mm 300 mm 170 mm 250 mm 150 mm 100 mm Opaque: 3 mm dia. min. Use the unit within the operating temperature range of the fiber used. When used with -T61-S, use the unit within the range -40 to +200 C. Brass Optical glass A-247

4 Item Applicable Fiber E3X-DA-N Differential Sensing (Standard sensing object) Ambient temperature Base: Reflector: White paper superlong- White paper Standard White paper superhigh-speed Reflective side view conversion attachment unit Conversion of through-beam model into side view reflective model -TC200A E39-F5 Reflective model 1 to 130 mm (100 x 100 mm) 1 to 0 mm (100 x 100 mm) 2 to 45 mm (100 x 100 mm) 20% max. of sensing -40 to 70 C (with no icing or condensation) Brass Stainless steel ens Unit (E39-F3# series) Spot diameter Protective Spiral Tubes Adjustable in the range 0.5 to 1.0 mm dia. Adjustable in the range 0.1 to 0.6 mm dia. 7mm 0.5 mm 7mm 0.1 mm Spot lens unit 17mm 0.5 mm 17mm 0.2 mm 4 mm max. at 0 to 20 mm Item E39-F3A E39-F3A-5 E39-F3B E39-F3C Applicable fiber -D32 -C42 -EC31 -EC41 -EC31 -EC41 -EC31 -EC41 Tube: Aluminum ens Optical glass E39-F32A5 E39-F32A E39-F32B5 E39-F32B E39-F32C5 E39-F32C E39-F32D5 E39-F32D Item Head connector Tube End cap Ambient temperature Operating/Storage: -40 to +150 C (Use the fiber placed inside within the operating temperature of that fiber) Ambient humidity Operating: 35% to 5% Storage: 35% to 95% Bending radius 30 mm min. Tensile strength Between head connector or end cap and tube: 1.5 Nm max., tube: 2 Nm max. Compression load Tube: 29.4 N max. Head Brass nickel plating connector End cap Brass nickel plating Tube Stainless steel (SUS304) A-24 Advanced Photoelectric s

5 Dimensions Accessories (Order Separately) Reflectors H-3 Mounting Brackets H-3 End Plate PFP-M ens Unit E39-F1 ong Distance ens Units E39-F2 side view unit E39-F2 M2.6 x 0.45 Effective depth: 3. Countersunk with straight edge, depth: dia. M2.6 Effective depth: 3.2 Countersunk with straight edge, depth: 0.9 : Tube: Brass ens: Optical glass Note: One set includes two units ens-equipped Reflective Unit E39-F Two, M3 toothed washers Two, 3.2 dia. 6.4 ± : Tube: Brass Base: Aluminum * Fix the fiber head using the slotted head machines screw. Do not insert the E39-F1 ens. Two, M3 x 3 slotted head machine screws * M3 x 6 angle fixing screws : Tube: Brass ens: Optical glass Note: One set includes two units E39-F5 side view Reflective Unit Two, 3.2 dia. sensing holes ± Two, M3 Fiber Unit mounting holes (-TC200A) Two, 3.2 dia. 2.1 mounting holes : Base: Brass Reflector Stainless steel Note: Only the -TC200A can be mounted. When mounting it, remove all the supplied nuts and screw it into the E39-F5. (Screw it until it is stopped by the stopper.) Small Spot ens Unit E39-F3A Small Spot ens Unit E39-F3A-5 M2 x 2 hexagon set screw (for fixing fibers) Flat knurled nut 2.1 dia. 6 dia. 5 dia. : Tube: Aluminum Optical lens: Optical glass ens (3.7 dia.) Small Spot ens Unit E39-F3B dia. Note: -D32 is a ens Unit for the -C42. : Tube: Aluminum Optical lens: Optical glass ens (3.7 dia.) Small Spot ens Unit E39-F3C M3 x 0.5, effective length: 3 Note: -C31 is a ens Unit for the -C41. Flat knurled nut : Tube: Aluminum Optical lens: Optical glass 6 dia. 5.5 dia. ens (4. dia.) M3 x 0.5, depth: 4.4 Note: -C31 is a ens Unit for the -C dia. 5 dia. 5. M3 x 0.5, effective length: 3 ens 10.9 (3.7 dia.) : Tube: Aluminum Optical lens: Optical glass Note: -C31 is a ens Unit for the -C41. Protective Spiral Tubes E39-F32A/F32A5 E39-F32B/F32B5 M3 x 0.5, depth: 4 Head connector * 1 (4.6 dia.) End cap * 1 3 dia. 6 dia. Tube * 2 Note: 1. is as follows: E39-F32A and E39-F32B: 1,000 E39-F32A5, E39-F32B5: A pair of E39-F32A (5)'s is sold as E39-F32B (5) * 1. Nickel-plated brass * 2. SUS304 stainless-steel A-249

6 E39-F32C, F32C5 M4 x 0.7, depth: 4 Head connector * 1 (5.6 dia.) End cap * 1 7 dia. E39-F32D/F32D5 Tube * 2 Note: is as follows: E39-F32C: 1,000, E39-F32C5: 500 M4 x 0.75, depth: 4 Head connector * 1 (7 dia.) End cap * 1 5 dia. * 1. Nickel-plated brass * 2. SUS304 stainless-steel.5 dia. Tube * 2 * 1. Nickel-plated brass * 2. SUS304 stainless-steel Note: is as follows: E39-F32D: 1,000 E39-F32A5, E39-F32D5: 500 Other Accessories E39-F4 Fiber Cutter E39-F9 Attachment for Thin Fiber Standard fiber insertion hole Thin fiber insertion hole 1.1 dia. Insertion mark (for inserting into an amplifier) (2.2 dia.) : ABS Note: One set includes two units. Included with Thin Fiber Unit. E39-F10 Fiber Connector dia. 25 Retention 2.2-dia. fiber clip * 2 Splice * 1 3. dia. 3 dia. Retention clip * dia. fiber 26. E39-F11 Sleeve Bender 10. R.5 R * 1. Polyester * 2. Brass R5 R10 27 E39-K2 Protective Attachment C1 Two, 2.6 dia. C1 Example 16 E-39-K2 : ABS Two, 5.1 dia. 10 -T4S A DIMENSIONS SHOWN ARE IN MIIMETERS. To convert millimeters into inches, multiply by To convert grams into ounces, multiply by Cat. No. E42E-EN-01+Accessories In the interest of product improvement, specifications are subject to change without notice. A-250 Advanced Photoelectric s