Hitachi Industrial Digital Interface Camera Line-up Image Size VGA XGA Quad-VGA SXGA UXGA 2M pixels 4M pixels 5M pxels 12M pxels

Transcription

1 Flame late Hitachi Industrial Digital Interface Camera Line-up Image Size VGA XGA Quad-VGA SXGA UXGA 2M pixels 4M pixels 5M pxels 12M pxels KP-FMR200W 280 fps GV : GigE Vision KP-FM200W HV-F32S UB : USB3 Vision KP-FD32GV W : Mini Camera Link KP-FD32UB (Po/non-Po auto switching) 200 fps KP-FD32W P : Mini Camera Link (Po) KP-F32GV S : Mini Camera Link (non-po) KP-F32UB Lite : Po-Lite KP-F32W 163 fps KP-FM1200 is Mini Camera Link (non-po) KP-FM500W 150 fps KP-FR31P/S 120 fps KP-F31P/S 112 fps HV-F32GV KP-FD33GV KP-F33GV 90 fps KP-FM30Lite KP-FBM30Lite 61 fps KP-FM100P KP-FR30P/S KP-FBR30P/S 60 fps KP-F30P/S KP-FB30P/S KP-F30Lite 53 fps 36 fps KP-FD83GV KP-FR80P/S KP-F83GV KP-F80P/S KP-F80Lite 30 fps HV-F130GV HV-F130S : 3CCD Color (RGB) : 3CCD Colo (YUV) : Color (RGB) : Color (YUV) : Color (RAW) : Black and White KP-FD140GV KP-FD140P/ S KP-FMD100P KP-F145GV KP-F140GV KP-F145W KP-FMD200UB KP-FM200GV KP-FM200UB KP-FM200P HV-F202S KP-FMD200GV KP-FD202GV KP-FD202P/S KP-FMD200P KP-FR230P/S KP-F202GV KP-F230P/S KP-FMR400W KP-FM400W KP-FMD500UB KP-FM500UB 28 fps HV-F202GV 22 fps KP-FM500GV 20 fps KP-FMD200P 18 fps KP-F520W KP-FR500W 16 fps KP-F500W KP-F500GV KP-FR200P/S 15 fps KP-F200P/S KP-F200Lite 12 fps KP-FD500P/S KP-FMD500GV 9 fps KP-FD500GV KP-FM1200 General Catalog Cameras for Industrial Applications Camera Photo is Position and shape of the rear connectors is different depending on the model. KP-FM30Lite Series KP-F520W/FD32W Series KP-FMD200P Series KP-FMD200UB/FD32UB Series KP-FR200P/S Series KP-FMD200GV/FD32GV Series KP-FR230P/S Series KP-FMD500GV/UB, FM500W KP-FMR400W Series KP-FD510W Series KP-FM1200 DV-E540T Printed in Japan (1) KP-HD20A HV-F202GV / F130GV / F32GV / F202S / F130S / F32S

2 Camera Overview 3CCD Cameras GigE Vision (Gigabit Ethernet) HV-F202GV 1/1.8 3CCD UXGA (1600 x 1200) 28 fps (YUV) 55(W) x 55(H) x 89(D) mm Page 7 HV-F130GV 1/3 3CCD Quad-VGA (1280 x 960) 30 fps (YUV) 55(W) x 55(H) x 89(D) mm Page 7 HV-F32GV 1/3 3CCD VGA (640 x 480) 112 fps (YUV) 55(W) x 55(H) x 89(D) mm Page 7 Mini Camera Link HV-F202S 1/1.8 3CCD UXGA (1600 x 1200) 30 fps 55(W) x 55(H) x 89(D) mm Page 8 HV-F130S 1/3 3CCD Quad-VGA (1280 x 960) 30 fps 55(W) x 55(H) x 89(D) mm Page 8 HV-F32S 1/3 3CCD VGA (640 x 480) 200 fps 55(W) x 55(H) x 89(D) mm Page 8 1CCD Color Cameras GigE Vision (Gigabit Ethernet) KP-FMD500GV 2/3 1CMOS 5M Pixels (2448 x 2048) 9 fps (YUV) 44(W) x 44(H) x 41(D) mm Page 9-10 KP-FMD200GV 1/1.8" 1CMOS UXGA (1600 x 1200) 30 fps (YUV) 29(W) x 29(H) x 35(D) mm Page 9-10 KP-FD500GV 2/3 1CCD 5M pixel (2448 x 2050) 9 fps (YUV) 44(W) x 29(H) x 72(D) mm Page KP-FD202GV 1/1.8 1CCD UXGA (1620 x 1220) 30 fps (YUV) 44(W) x 29(H) x 72(D) mm Page KP-FD140GV 1/2 1CCD SXGA (1360 x 1024) 30 fps 44(W) x 29(H) x 72(D) mm Page KP-FD83GV 1/3 1CCD XGA (1024 x 768) 36 fps 44(W) x 29(H) x 72(D) mm Page KP-FD33GV 1/3 1CCD VGA (659 x 492) 90 fps 44(W) x 29(H) x 72(D) mm Page KP-FD32GV 1/3 1CCD VGA (652 x 490) 200 fps 29(W) x 29(H) x 35(D) mm Page 9-10 USB3 Vision KP-FMD500UB 2/3 1CMOS 5M Pixels (2448 x 2048) 60 fps (YUV) 44(W) x 44(H) x 41(D) mm Page KP-FMD200UB 1/1.8" 1CMOS UXGA (1600 x 1200) 53 fps 29(W) x 29(H) x 20(D) mm Page KP-FD32UB 1/3 1CCD VGA (652 x 490) 200 fps 29(W) x 29(H) x 20(D) mm Page Mini Camera Link KP-FD510W 2/3 1CCD 5M pixel (2448 x 2048) 12 fps 44(W) x 44(H) x 41(D) mm Page KP-FD500S/P 2/3 1CCD 5M pixel (2448 x 2048) 12 fps 44(W) x 44(H) x 41(D) mm Page KP-FD202S/P 1/1.8 1CCD UXGA (1628 x 1236) 30 fps 44(W) x 44(H) x 41(D) mm Page KP-FD140S/P 1/2 1CCD SXGA (1392 x 1040) 30 fps 44(W) x 44(H) x 41(D) mm Page KP-FMD200P 1/1.8 CMOS UXGA (1600 x 1200) 20 fps 29(W) x 29(H) x 20(D) mm Page 20 KP-FMD100P 1/1.8 CMOS SXGA (1280 x 1024) 30 fps 29(W) x 29(H) x 20(D) mm Page 20 KP-FD32W 1/3 1CCD VGA (652 x 490) 200 fps 29(W) x 29(H) x 29(D) mm Page 16 KP-FMR830 1/3 1CMOS (640 x 3840) (by 8 cameras) 30 fps 1 Camera: 21.5(W) 21.5(H) 21.5(D) mm Page 23 1CCD Color (RAW) Cameras Mini Camera Link KP-FR500W 2/3 1CCD 5M pixel (2448 x 2048) 16 fps 44(W) x 44(H) x 41(D) mm Page KP-FMR400W 1 1CMOS 4M pixel (2048 x 2048) 150 fps 44(W) x 44(H) x 41(D) mm Page 19 KP-FR230S/P 1/1.8 1CCD UXGA (1628 x 1236) 30 fps 29(W) x 29(H) x 38(D) mm Page 21 KP-FR200S/P 1/1.8 1CCD UXGA (1628 x 1236) 15 fps 29(W) x 29(H) x 29(D) mm Page 22 KP-FMR200W 2/3 1CMOS 2M pixel (2048 x 1088) 280 fps 44(W) x 44(H) x 41(D) mm Page 19 KP-FR80S/P 1/3 1CCD XGA (1034 x 779) 36 fps 29(W) x 29(H) x 29(D) mm Page 22 KP-FR31S/P 1/3 1CCD VGA (659 x 494) 120 fps 29(W) x 29(H) x 38(D) mm Page 21 KP-FBR30S/P 1/3 1CCD VGA (659 x 494) 60 fps Head: 12(W) x 12.5(H) x 47.5(L) mm Page 21 KP-FR30P/S 1/3 1CCD VGA (659 x 494) 60 fps 29(W) x 29(H) x 29(D) mm Page 22 1CCD Black & White Cameras GigE Vision (Gigabit Ethernet) KP-FM500GV 2/3 1CMOS 5M Pixel (2448 x 2048) 22 fps 44(W) x 44(H) x 41(D) mm Page 9-10 KP-F500GV 2/3 1CCD 5M pixel (2448 x 2050) 16 fps 44(W) x 29(H) x 72(D) mm Page KP-F202GV 1/1.8 1CCD UXGA (1620 x 1220) 30 fps 44(W) x 29(H) x 72(D) mm Page KP-FM200GV 1/1.8" 1CMOS UXGA (1600 x 1200) 53 fps 29(W) x 29(H) x 35(D) mm Page 9-10 KP-F145GV 2/3 1CCD NIR SXGA (1392 x 1040) 30 fps 44(W) x 29(H) x 72(D) mm Page KP-F140GV 1/2 1CCD SXGA (1360 x 1024) 30 fps 44(W) x 29(H) x 72(D) mm Page KP-F83GV 1/3 1CCD XGA (1024 x 768) 36 fps 44(W) x 29(H) x 72(D) mm Page KP-F33GV 1/3 1CCD VGA (659 x 492) 90 fps 44(W) x 29(H) x 72(D) mm Page KP-F32GV 1/3 1CCD VGA (652 x 490) 200 fps 29(W) x 29(H) x 35(D) mm Page 9-10 USB3 Vision KP-FM500UB 2/3 1CMOS 5M pixel (2448 x 2048) 60 fps 44(W) x 44(H) x 41(D) mm Page KP-FM200UB 1/1.8" 1CMOS UXGA (1600 x 1200) 53 fps 29(W) x 29(H) x 20(D) mm Page KP-F32UB 1/3 1CCD VGA (652 x 490) 200 fps 29(W) x 29(H) x 20(D) mm Page Camera Overview 1CCD Black & White Cameras Mini Camera Link KP-FM CMOS 12M pixel (4096 x 3072) 53 fps 55(W) 55(H) 45(D) mm Page 15 KP-F520W 2/3 1CCD 5M pixel (2448 x 2048) 18 fps 29(W) x 29(H) x 29(D) mm Page 16 KP-F500W 2/3 1CCD 5M pixel (2448 x 2048) 16 fps 44(W) x 44(H) x 41(D) mm Page 17 KP-FM500W 2/3 1CMOS 5M pixel (2448 x 2048) 163 fps 44(W) x 44(H) x 41(D) mm Page 19 KP-FM400W 1 1CMOS 4M pixel (2048 x 2048) 150 fps 44(W) x 44(H) x 41(D) mm Page 19 KP-F230S/P 1/1.8 1CCD UXGA (1628 x 1236) 30 fps 29(W) x 29(H) x 38(D) mm Page 21 KP-F200S/P 1/1.8 1CCD UXGA (1628 x 1236) 15 fps 29(W) x 29(H) x 29(D) mm Page 22 KP-FM200W 2/3 1CMOS 2M pixel (2048 x 1088) 280 fps 44(W) x 44(H) x 41(D) mm Page 19 KP-FM200P 1/1.8 1CMOS UXGA (1600 x 1200) 53 fps 29(W) x 29(H) x 20(D) mm Page 20 KP-F145W 2/3 1CCD NIR SXGA (1392 x 1040) 30 fps 44(W) x 44(H) x 41(D) mm Page 17 KP-FM100P 1/1.8 1CMOS SXGA (1280 x 1024) 61 fps 29(W) x 29(H) x 20(D) mm Page 20 KP-F80S/P 1/3 1CCD XGA (1034 x 779) 36 fps 29(W) x 29(H) x 29(D) mm Page 22 KP-F32W 1/3 1CCD VGA (660 x 494) 200 fps 29(W) x 29(H) x 29(D) mm Page 16 KP-F31S/P 1/3 1CCD VGA (660 x 494) 120 fps 29(W) x 29(H) x 38(D) mm Page 21 KP-F30S/P 1/3 1CCD VGA (659 x 494) 60 fps 29(W) x 29(H) x 29(D) mm Page 22 Po Lite KP-F200Lite 1/1.8 1CCD UXGA (1628 x 1236) 15 fps 29(W) x 29(H) x 29(D) mm Page 24 KP-F80Lite 1/3 1CCD XGA (1034 x 779) 36 fps 29(W) x 29(H) x 29(D) mm Page 24 KP-F30Lite 1/3 1CCD VGA (659 x 494) 60 fps 29(W) x 29(H) x 29(D) mm Page 24 KP-FM30Lite 1/3 1CMOS VGA (752 x 480) 90 fps 21.5(W) x 21.5(H) x 21.5(D) mm Page 24 KP-FBM30Lite 1/3 1CMOS VGA (752 x 480) 90 fps 21.5(W) x 21.5(H) x 21.5(D) mm Page 24 HDTV Cameras 3CCD Cameras DK-H100 2/3 3CCD 1080i (1920 x 1080) 99(W) x 105(H) x 155(D) mm Page 25 DK-Z50 2/3 3CCD 1080i (1920 x 1080) 99(W) x 105(H) x 155(D) mm Page 25 HV-HD33 1/3 3MOS 1080i / 720p (1280 x 720) 65(W) x 65(H) x 125(D) mm Page 26 1CCD Color Cameras KP-HD1005 1/3 1CMOS P (1920 x 1080) 64(W) 63(H) 135(D) mm Page KP-HD1005-S2 1/3 1CMOS P (1920 x 1080) 64(W) 63(H) 135(D) mm Page KP-HD1005-S4 1/3 1CMOS i/29.97p (1920 x 1080) P type: i/25p (1920 x 1080) 64(W) 63(H) 103(D) mm Page KP-HD1005-S5 1/3 1CMOS i/29.97p (1920 x 1080) P type: i/25p (1920 x 1080) 64(W) 63(H) 103(D) mm Page KP-HD1001 1/3 1CMOS P (1920 x 1080) 64(W) 63(H) 135(D) mm Page KP-HD20A 1/3 1CMOS i/50i/29.97p/25p (1920 x 1080) 44(W) 44(H) 59(D) mm Page KP-HD20A-S2 1/3 1CMOS P (1920 x 1080) 44(W) 44(H) 59(D) mm Page Analog Interface Cameras 1CCD Color Cameras KP-D20B 1/2 1CCD NTSC (768 x 494), PAL (752 x 582) 44(W) x 44(H) x 49(D) mm Page 29 KP-D20A 1/3 1CCD NTSC (768 x 494), PAL (752 x 582) 44(W) x 44(H) x 49(D) mm Page 29 KP-D5001 1/2 1CCD NTSC (768 x 494), PAL (752 x 582) 64(W) x 63(H) x 135(D) mm Page 30 KP-D5000 1/2 1CCD NTSC (768 x 494), PAL (752 x 582) 64(W) x 63(H) x 135(D) mm Page 30 KP-D5010 1/2 1CCD NTSC (768 x 494), PAL (752 x 582) 64(W) x 63(H) x 64(D) mm Page

3 Table of Contents About Digital Interface Main Features HV-F202GV, HV-F130GV, HV-F32GV HV-F202S, HV-F130S, HV-F32S KP-FMD500GV, KP-FM500GV, KP-FMD200GV, KP-FM200GV, KP-FD32GV, KP-F32GV KP-FMD500UB, KP-FM500UB, KP-FMD200UB, KP-FM200UB, KP-FD32UB, KP-F32UB KP-FD500GV, KP-F500GV, KP-FD202GV, KP-F202GV, KP-F145GV, KP-FD140GV, KP-F140GV, KP-FD83GV, KP-F83GV, KP-FD33GV, KP-F33GV KP-FM1200 KP-F520W, KP-FD32W, KP-F32W KP-FD510W, KP-FR500W, KP-F500W, KP-FD500P/S, KP-FD202P/S, KP-FD140P/S, KP-F145W KP-FM500W, KP-FMR400W, KP-FM400W, KP-FMR200W, KP-FM200W KP-FMD200P, KP-FM200P, KP-FMD100P, KP-FM100P KP-FR230P/S, KP-F230P/S, KP-FR31P/S, KP-F31P/S, KP-FBR30P/S KP-FR200P/S, KP-F200P/S, KP-FR80P/S, KP-F80P/S, KP-FR30P/S, KP-F30P/S KP-FMR830 KP-F200Lite, KP-F80Lite, KP-F30Lite, KP-FM30Lite, KP-FBM30Lite HDTV Cameras DK-H100, DK-Z50 HV-HD33 KP-HD1005, KP-HD1005-S2, KP-HD1005-S4, KP-HD1005-S5, KP-HD1001, KP-HD20A, KP-HD20A-S2, MU-HD101, MU-HD104, MU-HD104-S1 Analog Interface Cameras KP-D20A, KP-D20B, KP-D20B-S3 KP-D5000, KP-D5001, KP-D5010 Accessory list Accessories List of Frame Grabber Board List of Frame Grabber Board (Box type) List of Optional Lens Hitachi Industrial Digital Interface Camera Line-up About Digital Interface GigE Vision (Gigabit Ethernet interface) P3 to P5 P5 to P6 P7 P8 P9 to P10 P11 to P12 P13 to P14 P15 P16 P17 to P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 to P28 Direct connection is possible to PC by the Gigabit Ethernet cable. This cable is less bulky compared with parallel digital output cabling. GigE Cable length can be extended to maximum 100m without hub and switcher. Based on Industrial camera interface standard GigE Vision, a maximum of 1Gbps high speed data transmission is available and suitable for image processing. Development of camera control system is easy because industrial camera control API GenICam lead EMVA (European Machine Vision Association). Power can be supplied via Ethernet cable for PoE enabled models (Power over Ethernet). Applicable Models (PoE Enabled): HV-F202GV, HV-F130GV, HV-F32GV, KP-FMD500GV, KP-FM500GV, KP-FMD200GV, KP-FM200GV,KP-FD32GV, KP-F32GV, KP-FD510GV, KP-F510GV, KP-FD500GV, KP-F500GV, KP-FD202GV, KP-F202GV, KP-F145GV, KP-FD140GV, KP-F140GV, KP-FD83GV, KP-F83GV, KP-FD33GV, KP-F33GV, System Configuration (example) P29 P30 P31 to P32 P33 P34 to P35 P36 P37 to P38 Back cover About Digital Interface Camera Link Camera link is an AIA imaging standard for serial digital interface between a camera and a frame grabber. Camera Link is available in Base, Medium or Full configurations depending on the camera resolution, bit depth and frame rate. In addition there are several different types of Camera Link interfaces including Mini, Po for power over Camera Link, and Po Lite for reduced connector and cable size. Applicable Models Model Type of CameraLink KP-FM500W KP-FMR400W KP-FM400W KP-FMR200W KP-FM200W KP-FD510W KP-F500W KP-FR500W KP-F520W KP-F145W KP-F32W KP-FD500P KP-FD202P KP-FD140P KP-FM200P Mini (Po) KP-FM100P KP-FMD200P KP-FMD100P KP-F230P Mini Mini (Auto Selection of Po or non-po) Configuration Base Medium Full Base Medium Base Base Medium Base Model Type of CameraLink Configuration KP-F200P KP-F80P KP-F31P KP-F30P KP-FR230P KP-FR200P Mini (Po) Base KP-FR80P KP-FR31P KP-FR30P KP-FBR30P KP-FM1200 Base/Medium/ Full HV-F202S HV-F130S HV-F32S KP-FD500S KP-FD202S KP-FD140S Mini (Non-Po) Base Medium Model Type of CameraLink KP-F230S KP-F200S KP-F80S KP-F31S KP-F30S KP-FR230S Mini KP-FR200S (Non-Po) KP-FR80S KP-FR31S KP-FR30S KP-FBR30S KP-FMR830 KP-F200Lite KP-F80Lite KP-F30Lite Po-Lite KP-FM30Lite KP-FBM30Lite Configuration By adopting a Camera Link digital interface, high speed video data transfer is possible. Furthermore, by adopting the small connector (SDR) of a Mini Camera Link standard, the size of the camera has been reduced. The Po version is connected by a single (Po) Mini Camera Link cable directly to a frame grabber supporting Po. Simple systems construction is possible. System Configuration for Po (example) Applicable Model: W, P type all models Applicable Model: KP-FM500W, KP-FMR400W, KP-FM400W, KP-FMR200W, KP-FM200W System Configuration for Non-Po (example) Base Base Applicable Model: KP-FD510W, KP-FD500P, KP-FR500W, KP-F500W, KP-FM500W, KP-FMR400W, KP-FM400W, KP-FD202P, KP-FMR200W, KP-FM200W, KP-FD140P Applicable Model: W, S type all models, KP-FM1200, KP-FMR830 Applicable Model: HV-F202S, HV-F130S, HV-F32S, KP-FM1200, KP-FD510W, KP-FD500S, KP-FR500W, KP-F500W, KP-FM500W, KP-FMR400W, KP-FM400W, KP-FD202S, KP-FMR200W, KP-FM200W, KP-FD140S Applicable Model: KP-FM1200, KP-FM500W, KP-FMR400W, KP-FM400W, KP-FMR200W, KP-FM200W USB3 Vision USB3 Vision is the next standard generation for industrial camera interface from the AIA (Automated Image Association), that makes use of the USB3 connector on a PC, to achieve transmission speeds equivalent to the Medium Configuration of Camera Link. USB3 has about 10 times the bandwidth of USB2 and offers a simple and reliable low cost two way transmission system between the camera and the PC. An industrial style screw lock connector provides a reliable plug-and-play connection while providing camera power. Reduced CPU loads due to DMA allow acquisition of stable images with low latency. Applicable Models: KP-FMD500UB, KP-FM500UB, KP-FMD200UB, KP-FM200UB, KP-FD32UB, KP-F32UB Connection example of multiple Cameras using the expansion board or USB3.0 HUB Simple Connection example Trigger realized with USB3.0 or via 6-pin connector. Po-Lite Po Lite features a smaller Camera Link connector reducing the pin System Configuration (Four camera connection example) count from 26 pins to 14 pins along with a smaller cable which allows smaller camera size and more connectors on the frame grabber board allowing the support of up to four cameras by a single frame grabber board. Po-Lite supports Base Camera Link configuration and provides power to the camera over the interface along with serial camera data for image and camera control. Applicable Models: KP-F200Lite, KP-F80Lite, KP-F30Lite, KP-FM30Lite, KP-FBM30Lite 3 4

4 Main Features Main Features A variety of interface By a variety of interfaces, it is adaptable to a variety of systems. GigE Vision USB3 Vision Mini Camera Link Po-Lite -GV models -UB models Auto Selection of Po or non-po -W models Po Non-Po Near infrared sensitivity Extended spectral response allows use of the camera in the near infrared region. Applicable models: KP-F145W, KP-F145GV KP-F145W KP-F145GV -P models -S models -Lite models Raw Data Output (KP-FRxxx Models) The FR series of cameras use a CCD with an RGB primary color mosaic filter, outputting the image data in a RAW format with minimal processing in order to achieve higher frame rates as compared to a normal color camera. External image processing and software is required to produce a proper color picture. High color fidelity (KP-FDxxx/KP-FMDxxx Models) RGB primary color mosaic filter achieve high color fidelity. High resolution & high speed High resolution combined with high frame rates is possible with this series of cameras. Can be used for high-precision and high-speed image processing in many applications. Four-sided attachment mechanism Applicable Models: KP-FM1200 / F520W /FMD200GV / FM200GV / FMD200UB / FM200UB / FMD200P / FM200P / FMD100P / FM100P / F32GV / FD32GV / F32UB / FD32UB / F32W Can be attached four-side of the camera, making it suitable for camera installation of the narrow portion. Compact and lightweight Achieve a minimum size of [21.5 (W) x 21.5 (H) x 21.5 (D) mm] in Po-Lite model. Also in other models have realized the compact size. 1CCD (CMOS) Models 3CCD Dimensions WxHxDmm Models (Not including protrusions and lens) 21.5 x 21.5 x 21.5 KP-FM30Lite / FBM30Lite, KP-FMR830(1 Camera) KP-FMD200UB / FM200UB / FMD200P / 29 x 29 x 20 FM200P / FMD100P / FM100P/FD32UB/ F32UB KP-F520W / FR200P / FR200S / F200P / F200S/ FR80P /FR80S / F80P / F80S / 29 x 29 x 29 FD32W / F32W / FR30P / FR30S / F30P / F30S /F200Lite /F80Lite / F30Lite 29 x 29 x 35 KP-FMD200GV / FM200GV / FD32GV / F32GV KP-FR230P / FR230S / F230P / F230S / 29 x 29 x 38 FR31P / FR31S / F31P / F31S KP-FD510W / FMD500GV / FM500GV / FMD500UB / FM500UB / FM500W / FD500P / 44 x 44 x 41 FD500S / FR500W / F500W / FMR400W / FM400W / FD202P / FD202S / FMR200W / FM200W / F145W / FD140P / FD140S 55 x 55 x 45 KP-FM1200 KP-F500GV / F202GV / F145GV / F140GV / F83GV / 44 x 29 x 72 F33GV /FD500GV / FD202GV / FD140GV / FD83GV / FD33GV 12 x 12.5 x 47.5 Camera Head: KP-FBR30P/FBR30S 55 x 55 x 89 HV-F202GV / F202S / 130GV / 130S / 32GV / 32S Frame Shutter Higher vertical resolution for moving objects. Frame buffer function Applicable Models: KP-FM500W It is equipped with a frame buffer function to take advantage of the high-speed performance. This allows slow motion output. Double exposure mode Applicable Models: KP-F32GV Superposing each image exposed with two external trigger can be output. Cropping mode Applicable Models: KP-FM500W / FMD200P /FM200P A user selectable cropping area featuring reduced resolution (VGA/XGA/SXGA) can be selected to increase the camera frame rate. The KP-FM500W can operate at 652 fps in the VGA mode. Vertical subsampling modes Applicable Models: KP-FM1200 / FM500W / FMR400W/ FMR200W/FM400W/KP-FM200W Enables high-speed readout by vertical decimation of 2 to 10 times Vertical 2 pixels additional Modes Applicable Models: KP-F520W/F500W/F145W/ F230P/F230S/F31P/F31S Enables high-speed readout by the vertical 2 pixels addition mode Temperature detection output Applicable Models: KP-F520W The internal of the camera can be read. White spot detecting and correction White spots that result from radiation or high can be detected and corrected. Knee adjustment Applicable Models: KP-F520W, FD Model, FMD model, -GV Model, -UB Model, 3CCD model 6-Vector Independent Masking Applicable Models: (KP-FDXXX/FMDxxx Models, 3CCD Models) A 6-Vector color correction can be selected, allowing independent adjustment of the hue and saturation of the primary R,G,B, and complementary Cy, Mg, and Ye vectors, for accurate color reproduction of difficult objects. Selectable bit depth Bit Depth Applicable models KP-F520W / F500GV / FM500UB / FM500W / FR500W / 8 / 10 / 12 F500W / F202GV / FM200UB / F145GV / F145W / F140GV / F83GV / F33GV / F32UB / F32W 8 / 10 KP-FM1200 / FM500GV / FMR400W / FM400W / FR230P / FR230S/F230P / F230S /FM200GV / FMR200W / FM200W / FM200P / FR200P / FR200S / F200P / F200S / FM100P / FR80P / FR80S / F80P / F80S / F32GV / FR31P /FR31S / F31P / F31S / FR30P / FR30S / F30P / F30S / FBR30P / FBR30S / F200Lite / F80Lite / F30Lite / FM30Lite / FBM30Lite HV-F202GV / F202S / F130GV / F130S / F32GV / F32S KP-FD510W / FMD500UB / FD500GV / FD500P / 24 / 30 / 36 FD500S / FD202GV / FD202P / FD202S / FMD200UB / FD140GV / FD140P / FD140S / FD83GV / FD33GV / FD32GV / FD32UB / FD32W 24 / 30 KP-FMD500GV / FMD200GV 24 KP-FMR830 / FMD200P / FMD100P Features for 3CCD Models (HV-F202GV / F202S / F130GV / F130S / F32GV / F32S) Adjustable sharpness (DTL) width Sharpness (DTL) width is adjustable. A feeling of natural definition is provided when set a lower sharpness. A higher setting results in an image with enhanced contours. Auto shading (ASC) Color shading (non-uniformity of color distribution) due to lens and lighting can be corrected automati cally. 280 fps 2.23 Mpixel: KP-FMR200W / FM200W VGA: KP-FD32GV / F32GV / FD32UB / F32UB / FD32E / F32W, Multi-step Shutter 200 fps HV-F32S Electronic shutter is provided with multi-step or variable speed. Gamma adjustment Versatile imaging functions 163 fps 5.01 Mpixel: KP-FM500W Applicable Models: KP-F520W / FD510W / FM500W / Long time integration mode. 150 fps 4.19 Mpixel: KP-FMR400W /FM400W Frame on Demand FD202P / FD202S / FD140P / FD140S,FD32W / 120 fps VGA: KP-FR31P / F31P / FR31S / F31S A one-trigger and fixed-shutter mode of frame-on-demand F32W, Four application files. 112 fps VGA: HV-F32GV 90 fps VGA: KP-FD33GV / F33GV /FM30Lite / FBM30Lite are provided allowing precise timing and exposure for image capture. HV-F202S /F130S / F32S, -UB Models, -GV Models Gamma curve can be adjusted by the LUT. Four different complete camera setups can be stored and recalled. 61 fps SXGA: KP-FM100P FLASH output Realtime automatic white balance function (ATW) 5.01 Mpixel: KP-FM500UB Remote Control 60 fps VGA: KP-FR30P / FR30SC L/ F30P / F30S / FBR30P / Changements in the color of the of the illumination can be adjusted automatically. Applicable Models: KP-F520W / FD500GV / F500GV / FBR30S / F30Lite Through the digital interface, various setting such as shutter, Mpixel: KP-FM1200 mode, gain, partial scan, bit depth, etc can be adjusted. FD202GV / F202GV / FMD200GV / FM200GV / FMD200UB / 53 fps UXGA: KP-FM200GV / FMD200UB / FM200UB / FM200P FM200UB / F145GV / FD140GV / F140GV / FD83GV / Auto exposure (ALC: auto level control) XGA: KP-FD83GV / F83GV / FR80P / FR80S / F80P / Partial Scan 36 fps F83GV / FD33GV / F33GV / F32W / FD32GV / F32GV / The ALC examines and uses 64 separate areas of the image F80S / F80Lite The vertical start line and number of lines can be adjusted. FD32UB / F32UB to continuously control the AGC and AES, providing extremely UXGA: HV-F202S, KP-FR230P / FR230S / F230P / Higher frame rates are possible by using partial scan mode. The camera has an output-signal to control and synchronize an F230S / FD202GV / F202GV / FD202P / FD202S / wide response to variations in light. Peak or Average ALC FMD200GV (KP-FM1200 can be set eight area) external flash to the camera exposure. 30 fps response can be selected from the camera menu. SXGA: KP-F145GV/F145W/FD140GV/F140GV/FD140P/ (KP-FM200P/FMD200P/FM100P/FMD100P/ FD140S/FMD100P FM200UB/FM200GV/FMD200UB/FMD200GV: The start Selectable White Balance Adjustment Two mode gain control Quad-VGA: HV-F130GV / F130S position and area of H and V direction can be set in one pixel Applicable Models: (KP-FDXXX/FMDxxx Models, 3CCD AGC or user-programmable gain in 1 db steps. 28 fps UXGA: HV-F202GV 22 fps 5.01 Mpixel: KP-FM500GV spacing.) Models) Master black, R/B black, and R/B gain are adjustable. 20 fps Selectable white balance adjustment method of ATW (autotracking), Manual (manual setting of R and B gain) or one-time UXGA: KP-FMD200P 18 fps 5.01 Mpixel: KP-F520W (one-time auto adjustment). 16 fps 5.01 Mpixel: KP-F500GV / FR500W / F500W 15 fps UXGA: KP-FR200P / FR200S / F200P / F200S / F200Lite 12 fps 5.01 Mpixel: KP-FD510W / FD500P / FD500S 9 fps 5.01 Mpixel: KP-FMD500GV / FD500GV 5 6

5 HV-F202GV HV-F130GV HV-F32GV GigE Vision 3CCD Color (RGB/YUV) 1/1.8 CCD 1/3 CCD UXGA (1.92M pixels) (1600 x 1200) Quad-VGA (1.23M pixels) (1280 x 960) VGA (0.31M pixels) (640 x 480) Max.28 frames (YUV 24 bits) Max.30 frames (YUV 24 bits) Max.112 frames (YUV 24 bits) 55(W) x 55(H) x 89(D) mm HV-F202S HV-F130S HV-F32S Mini (Non-Po) 3CCD Color (RGB) 1/1.8 CCD 1/3 CCD UXGA (1.92M pixels) (1600 x 1200) Quad-VGA (1.23M pixels) (1280 x 960) VGA (0.31M pixels) (640 x 480) Max.30 frames Max.30 frames Max.200 frames 55(W) x 55(H) x 89(D) mm HV-F202GV HV-F130GV HV-F32GV 1/1.8-inch progressive scan interline CCD (R, G, B 3 CCD) 1/3-inch progressive scan interline CCD (R, G, B 3 CCD) Effective pixels 1600(H) x 1200(V) 1280(H) x 960(V) 640(H) x 480(V) Pixel size 4.4 µm(h) x 4.4 µm(v) (Square pixel) 3.75 µm(h) x 3.75 µm(v) (Square pixel) 7.4 µm(h) x 7.4 µm(v) (Square pixel) Optical system 1/1.8-inch F1.8 prism 1/2-inch F2.2 prism Scanning area 7.04 mm(h) x 5.28 mm(v) 4.8 mm(h) x 3.6 mm(v) mm(h) x mm(v) Scanning Frequency Horizontal: 37.5 khz Vertical: Hz Horizontal: khz Vertical: Hz Horizontal: khz Vertical: Hz Pixel clock frequency: 72 MHz Pixel clock fequency: 45 MHz Pixel clock fequency: MHz / VD external C-mount (Flange focal distance: mm) Gigabit Ethernet IEEE802.3ab (1000BASE-T), GigE Vision Support, GenICam Support RGB (24 bit/30 bit/ 36 bit), YUV (24 bit/30 bit/ 36 bit) Frame rate (frames per second) Flame rate 24 bit 30 bit 36 bit 30 frames per second 112 frames per second RGB (YUV 24 bit) (YUV 24 bit) YUV Sensitivity (shutter off) 2000 lx, F5.6, 3200K OFF / Auto(AES) / Manual (Variable) Electric Variable 1/30 to 1/100,000 second 1/200 to 1/100,000 second shutter AES 1/30 to 1/100,000 second 1/200 to 1/100,000 second Long time integration 1/30 to approx. 4 second (1 frame step) 1/30 to approx. 10 second (1 frame step) 1/112 to approx. 10 second (1 frame step) Mode Fixed shutter, One trigger External Input Via Gigabit Ethernet cable or DC IN/SYNC connector trigger Input level 5 Vp-p ±0.5 V External sync signal (Strobe out) VD output, Flash out Registration Full Screen: 0.05% (except lens characteristics) Vertical Sharpness 2H White balance Manual / One-push auto / Continuous auto Gain Manual: 0 to +12 db, AGC: 0 to +12 db (with limit setting) Gamma 0.45 / 1.0 / LUT (Look up table: user customizable) Color masking OFF/ON (6 color independent masking) Sharpness Sharpness (DTL) level, Sharpness (DTL) width Paint black Adjustable Black level Adjustable Knee Adjustable (Knee point and knee slope) Power supply DC+12 V ±1 V (from DC IN / SYNC connector), 48V (PoE) Power consumption Approx. 7.8 W (DC+12 V) DC+12 V DC+12 V Performance 0 C to +40 C (+32 ºF to +104 ºF), 90 %RH or less Operating 10 C to +40 C (+14 ºF to +104 ºF), 90 %RH or less 20 C to +60 C (4 ºF to +140 ºF), 70 %RH or less, without dew condensation Vibration endurance 10 to 200 Hz 24.5 m/s m/s 2 55(W) x 55(H) x 89(D) mm (not including lens and protrusions) Approx. 350 g (without lens) Approx. 300 g (without lens) HV-F202S HV-F130S HV-F32S 1/1.8-inch progressive scan interline CCD (R, G, B 3 CCD) 1/3-inch progressive scan interline CCD (R, G, B 3 CCD) Effective pixels 1600(H) x 1200(V) 1280(H) x 960(V) 640(H) x 480(V) Pixel size 4.4 µm(h) x 4.4 µm(v) (Square pixel) 3.75 µm(h) x 3.75 µm(v) (Square pixel) 7.4 µm(h) x 7.4 µm(v) (Square pixel) Optical system 1/1.8-inch F1.8 prism 1/1.8-inch F2.2 prism Scanning area 7.04 mm(h) x 5.28 mm(v) 4.8 mm(h) x 3.6 mm(v) mm(h) x mm(v) Scanning Frequency Horizontal: 37.5 khz Vertical: Hz Horizontal: khz Vertical: Hz Horizontal: khz Vertical: Hz Pixel clock fequency: 72 MHz Pixel clock fequency: 45 MHz Pixel clock fequency: 60 MHz / VD external C-mount Flange focal distance mm Camera Link support Base Configuration / Medium Configuration Base Configuration: RGB 24bit Medium Configuration: RGB 30bit / RGB 36bit Flame rate 30 frames per second 200 frames per second Sensitivity (shutter off) 2000 lx, F5.6, 3200K OFF / Auto(AES) / Manual (Variable) Electric Variable 1/30 to 1/100,000 second 1/200 to 1/100,000 second shutter AES 1/30 to 1/100,000 second 1/200 to 1/100,000 second Long time integration 1/30 to approx. 4 second (1 frame step) 1/30 to approx. 10 second (1 frame step) 1/200 to approx. 10 second (1 frame step) Mode Fixed shutter, One trigger External Input Via Camera Link cable (CC1) or DC IN/SYNC connector trigger Input level 5 Vp-p ±0.5 V External sync signal (Strobe out) VD output, Flash out Registration Full Screen: 0.05% (except lens characteristics) Vertical Sharpness 2H White balance Manual / One-push auto / Continuous auto Gain Manual: 0 to +12 db, AGC: 0 to +12 db (with limit setting) Gamma 0.45 / 1.0 / LUT (Look up table: user customizable) Color masking OFF/ON (6 color independent masking) Sharpness Sharpness (DTL) level, Sharpness (DTL) width Paint black Adjustable Black level Adjustable Knee Adjustable (Knee point and knee slope) Power supply DC+12 V ±1 V (from DC IN / SYNC connector) Power consumption Approx. 7.2 W (DC+12 V) DC+12 V Approx. 9 W (DC+12 V) Performance 0 C to +40 C (+32 ºF to +104 ºF), 90 %RH or less Operating 10 C to +40 C (+14 ºF to +104 ºF), 90 %RH or less 20 C to +60 C (4 ºF to +140 ºF), 70 %RH or less, without dew condensation Vibration endurance 10 to 200 Hz 24.5 m/s m/s 2 55(W) x 55(H) x 89(D) mm (not including lens and protrusions) Approx. 350 g (without lens) Approx. 300 g (without lens) 7 8

6 KP-FM500GV KP-FMD500GV 1CMOS Black & Withe 2/3 1CMOS Color CMOS (RGB/YUV/RAW) KP-FM200GV 1CMOS Black & Withe GigE 1/1.8" KP-FMD200GV Vision 1CMOS Color CMOS (RGB/YUV/RAW) KP-F32GV KP-FD32GV KP-FM200GV, KP-FMD200GV 1CCD Black & Withe 1CCD Color (RGB/YUV/RAW) 1/3" CCD 5.01 M Pixels (2448 x 2048) UXGA (1.92 M Pixels) (1600 x 1200) VGA (0.32 M Pixels) (652 x 490) KP-FM200GV, KP-FMD200GV KP-F32GV, KP-FD32GV Max. 22 frames Max. 9 frames Max. 53 frames Max. 30 frames Max. 200 frames KP-F32GV, KP-FD32GV 44(W) x 44(H) x 41(D) mm 29(W) x 29(H) x 35(D) mm KP-FMD500GV KP-FM500GV KP-FMD200GV KP-FM200GV KP-FD32GV KP-FD32GV 2/3-inch CMOS 1/1.8-inch CMOS 1/3-inch CCD Effective pixels 2448(H) x 2048(D) 1600(H) x 1200(D) 659(H) x 494(D) Pixel size 3.45 µm(h) x 3.45 µm(v) (Square pixel) 4.5 µm(h) x 4.5 µm(v) (Square pixel) 7.4 µm(h) x 7.4 µm(v) (Square pixel) Color filter RGB primary color mosaic filter RGB primary color mosaic filter RGB primary color mosaic filter Scanning area 8.45 mm(h) x 7.07 mm(v) 7.2 mm(h) x 5.4 mm(v) 4.88 mm(h) x 3.66 mm(v) Video output Interface Protocol Image format C-mount (Flange focal distance: mm) Gigabit Ethernet GigE Vision compliant RGB 24/30 bit, YUV(4:2:2) 24/30 bit RAW 8/10 bit Mono 8/10 bit Mono 8/10 bit RGB 24/30 bit, YUV (4:2:2) 24/30 bit RAW 8/10 bit Mono 8/10 bit Mono 8/10/12 bit RGB 24/30 bit, YUV(4:2:2) 24/30 bit RAW 8/10 bit Mono 8/10 bit Image size 2448(H) x 2048(D) 1600(H) x 1200(D) 652(H) x 490(D) Frame rate 9 frames per second (YUV) 7 frames per second (RGB) 22 frames per second 30 frames per second (YUV) 18 frames per second (RGB) 53 frames per second 200 frames per second Mono 8/10 bit Sensitivity 2000 lx, F5.6, 3200K 400 lx, F8, 3200K 2000 lx, F5.6, 3200K 500 lx, F5.6, 3200K 2000 lx, F5.6, 3200K 400 lx, F5.6, 3200K S/N 50 db 45 db 50 db Electric shutter External trigger Mode PRESET VARIABLE OFF / Auto (AES) / Manual (PRESET or VARIABLE), OFF is normal exposure (frame rate) 1/22, 1/100, 1/200, 1/500, 1/1000, 1/2000, 1/4000, 10 to 1/100,000 second 1/53, 1/100, 1/250, 1/1000, 1/2000, 1/4000, Mode Fixed shutter (9 steps or Variable) Fixed shutter (8 steps or Variable) Input External sync signal Binning mode ALC (Auto level control) White balance Color masking Gain Via Gigabit Ethernet cable (Software trigger), 6-pin connector (Hardware trigger) VD output: 5 Vp-p ±0.3 V, Strobe out: 5 Vp-p ±0.3 V Selectable start position and width of picture grabbing in 1 pixel step OFF/ON (Vertical) Adjustable for video level ATW / MANUAL / One-Push OFF / ON (6 vector independent masking) 0 to 18 db by 0.1 db steps Gamma OFF ( =1) / LUT (0.45 to 1) Image adjustment function Power supply Sharpness, Black level, Knee DC +12 to 24 V ±1 V (via 6 pin connector), 48V(PoE) ATW / MANUAL / One-Push OFF / ON (6 vector independent masking) 1/200, 1/250, 1/500, 1/1000, 1/2000, 1/5000, Selectable start position and width of picture grabbing in 1H step ATW / MANUAL / One-Push OFF / ON (6 vector independent masking) Power consumption Approx. 7.5 W (625 ma) (DC12 V) Approx. 4.2 W (350 ma) (DC12 V) Approx. 3.5 W (292 ma) (DC12 V) Performance Operation Vibration endurance 0 C to +40 C (+32 ºF to 104 ºF), 90 %RH or less 10 C to +50 C (+14 ºF to 122 ºF), 90 %RH or less 20 C to +60 C (4 ºF to 140 ºF), 70 %RH or less, (without dew condensation 15 to 200 to 15 Hz (98.6 m/s 2 ), 10 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 44(W) x 44(H )x 41(D) mm (not including lens and protrusions) Approx. 130 g (without lens) Approx. 50 g (without lens) 29(W) x 29(H )x 35(D) mm (not including lens and protrusions) 9 10

7 KP-FM500UB KP-FMD500UB KP-FM200UB KP-FMD200UB KP-F32UB KP-FD32UB USB3 Vision 1CMOS Black & Withe 1CMOS Color (RGB/YUV/RAW) 1CMOS Black & Withe 1CMOS Color (RGB/YUV/RAW) 1CCD Black & Withe 1CCD Color (RGB/YUV/RAW) 2/3 CMOS 1/1.8" CMOS 1/3" CCD 5.01 M Pixels (2448 x 2048) UXGA (1.92 M Pixels) (1600 x 1200) VGA (0.32 M Pixels) (652 x 490) Max. 60 frames Max. 53 frames Max. 200 frames 44(W) x 44(H) x 41(D) mm 29(W) x 29(H) x 35(D) mm KP-FMD500UB KP-FM500UB KP-FMD200UB KP-FM200UB KP-FD32UB KP-FD32UB 2/3-inch CMOS 1/1.8-inch CMOS 1/3-inch CCD Effective pixels 2448(H) x 2048(D) 1600(H) x 1200(D) 659(H) x 494(D) Pixel size 3.45 µm(h) x 3.45 µm(v) (Square pixel) 4.5 µm(h) x 4.5 µm(v) (Square pixel) 7.4 µm(h) x 7.4 µm(v) (Square pixel) Color filter RGB primary color mosaic filter RGB primary color mosaic filter RGB primary color mosaic filter Scanning area 8.45 mm(h) x 7.07 mm(v) 7.2 mm(h) x 5.4 mm(v) 4.88 mm(h) x 3.66 mm(v) Interface Protocol C-mount (Flange focal distance: mm) USB 3.0 Interface USB3 Vision compliant Video output Image format RGB 24/30/36 bit, YUV(4:2:2) 24/30/36 bit RAW 8/10/12 bit Mono 8/10/12 bit Mono 8/10/12 bit RGB 24/30/36 bit, YUV(4:2:2) 24/30/36 bit RAW 8/10/12 bit Mono 8/10/12 bit Mono 8/10/12 bit RGB 24/30/36 bit, YUV(4:2:2) 24/30/36 bit RAW 8/10/12 bit Mono 8/10/12 bit Mono 8/10/12 bit Image size 2448(H) x 2048(D) 1600(H) x 1200(D) 652(H) x 490(D) Frame rate 60 frames per second 53 frames per second 200 frames per second KP-FM200UB, KP-FMD200UB, KP-F32UB, KP-FD32UB Sensitivity 2000 lx, F5.6, 3200K 400 lx, F8, 3200K 2000 lx, F5.6, 3200K 500 lx, F5.6, 3200K 2000 lx, F5.6, 3200K 400 lx, F5.6, 3200K S/N 50 db 45 db 50 db Electric shutter External trigger Mode PRESET VARIABLE OFF / Auto (AES) / Manual (PRESET or VARIABLE), OFF is normal exposure (frame rate) 1/22, 1/100, 1/200, 1/500, 1/1000, 1/2000, 1/4000, 10 to 1/100,000 second 1/53, 1/100, 1/250, 1/1000, 1/2000, 1/4000, Mode Fixed shutter (9 steps or Variable) Fixed shutter (8 steps or Variable) Input External sync signal Binning mode ALC (Auto level control) White balance Color masking Gain Via USB3.0 cable (Software trigger), 6-pin connector (Hardware trigger) VD output: 5 Vp-p ±0.3 V, Strobe out: 5 Vp-p ±0.3 V Selectable start position and width of picture grabbing in 1 pixel step OFF/ON (Vertical) Adjustable for video level ATW / MANUAL / One-Push OFF / ON (6 vector independent masking) 0 to 18 db by 0.1 db steps Gamma OFF ( =1) / LUT (0.45 to 1) Image adjustment function Power supply Sharpness, Black level, Knee DC +5 V ±5 % (via USB3.0 cable) ATW / MANUAL / One-Push OFF / ON (6 vector independent masking) 1/200, 1/250, 1/500, 1/1000, 1/2000, 1/5000, Selectable start position and width of picture grabbing in 1H step ATW / MANUAL / One-Push OFF / ON (6 vector independent masking) Power consumption Approx. 1.6 W (320 ma) Approx W (250 ma) Performance Operation Vibration endurance 0 C to +40 C (+32 ºF to 104 ºF), 90 %RH or less 10 C to +50 C (+14 ºF to 122 ºF), 90 %RH or less 20 C to +60 C (4 ºF to 140 ºF), 70 %RH or less, (without dew condensation 15 to 200 to 15 Hz (98.6 m/s 2 ), 10 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 44(W) x 44(H )x 41(D) mm (not including lens and protrusions) Approx. 130 g (without lens) Approx. 60 g (without lens) 29(W) x 29(H )x 20(D) mm (not including lens and protrusions) 11 12

8 KP-FD500GV 1CCD Color (RGB/YUV/RAW) 2/ M Pixels Max. 9 frames (YUV) KP-F500GV 1CCD Black & White CCD (2448 x 2048) Max. 16 frames KP-FD202GV 1CCD Color (RGB/YUV/RAW) 1/1.8" UXGA (2.01 M Pixels) Max. 30 frames (RAW) KP-F202GV 1CCD Black & White CCD (1628 x 1236) Max. 30 frames KP-F145GV 1CCD Black & White (Near infrared sensitivity) 2/3 CCD Max. 30 frames SXGA (1.45 M Pixels) KP-FD140GV GigE 1CCD Color (RGB/YUV/RAW) 1/2" (1392 x 1040) Max. 30 frames (YUV) Vision KP-F140GV 1CCD Black & White CCD Max. 30 frames XGA (0.81 M Pixels) KP-FD83GV 1CCD Color (RGB/YUV/RAW) (1034 x 779) 1/3" XGA (0.81 M Pixels) KP-F83GV 1CCD Black & White CCD (1036 x 779) KP-FD33GV 1CCD Color (RGB/YUV/RAW) VGA (0.33 M Pixels) KP-F33GV 1CCD Black & White (659 x 494) KP-FD500GV KP-F500GV KP-FD202GV KP-F202GV Max. 36 frames Max. 90 frames 2/3-inch progressive scan interline CCD 1/1.8-inch progressive scan interline CCD (KP-FD500GV: ICX625AQ, KP-F500GV: ICX625ALA) (KP-FD202GV: ICX274AQ, KP-F202GV: ICX274A) KP-F145GV 44(W) x 29(H) x 72(D) mm 2/3-inch progressive scan interline CCD (ICX285AL) Total pixels 2448(H) x 2048(V) 1688(H) x 1248(V) 1432(H) x 1050(V) Effective pixels 2448(H) x 2048(V) 1628(H) x 1236(V) 1392(H) x 1040(V) Pixel size 3.45 μm(h) x 3.45 μm(v) (Square pixel) 4.4 μm(h) x 4.4 μm(v) (Square pixel) 6.45 µm(h)x 6.45 µm(v) (Square pixel) Color filter (FD Model) RGB primary color mosaic filter Scanning area 8.47 mm(h) x 7.10 mm(v) 7.13 mm(h) x 5.44 mm(v) 8.98 mm(h) x 6.71 mm(v) / external C-mount (Flange focal distance: mm) Interface Gigabit Ethernet Protocol GigE Vision compliant Transfer rate 1 Gbps Image format KP-FD500GV/FD202GV: RGB 8/10/12 bit, YUV 8/10/12 bit, RAW 8/10/12 bit, MONO 8/10/12 bit KP-F500GV/F202GV: MONO 8/10/12 bit MONO 8/10/12 bit Image size 2448(H)x 2048(V) 1620(H)x 1220(V) 1392(H)x 1040(V) Sensitivity Electric shutter External trigger External sync signal Frame rate PRESET VARIABLE Mode Input Input level VD output Strobe out Full pixel readout KP-F500GV: 16 frames per second KP-FD500GV: 9 frames per second (YUV 8 bit, RAW 8/10/12 bit) 7 frames per second (RGB 8 bit, YUV 10/12 bit) 5 frames per second (RGB 10 bit) 3 frames per second (RGB 12 bit) KP-FD500GV: 2000 lx, F8, 3200K KP-F500GV: 400 lx, F8, 3200K Full pixel readout KP-F202GV: 30 frames per second KP-FD202GV: 30 frames per second (RAW 8 bit) 28 frames per second (YUV 8 bit, RAW 10/12 bit) 18 frames per second (RGB 8 bit, YUV 10/12 bit) 12 frames per second (RGB 10 bit) 9 frames per second (RGB 12 bit) KP-FD202GV: 2000 lx, F8, 3200K KP-F202GV: 2000 lx, F11, 3200K 30 frames per second 400 lx, F5.6, 3200K OFF/Auto (AES) / Manual (PRESET or VARIABLE), OFF is normal exposure (frame rate) 1/9(KP-FD500GV), 1/16(KP-F500GV), 1/60, 1/100, 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/250, 1/1000, 1/2000, From 10 second to approx. 1/ second Fixed shutter, One trigger, VD Sync, Reset control Via Gigabit Ethernet cable (Software trigger), 12-pin connector (Hardware trigger) +5 to 24 V 5 Vp-p ±0.3 V 5 Vp-p ±0.3 V Binning mode (No FD model) OFF / ON Grabbing image area is adjustable at 1 pixel step. Frame rate improves when vertical size is reduced. ALC (Auto level control) Adjustable for video level White balance (FD model) ATW/MANUAL/One-push Gain Auto / Manual (0 db to 12 db) Auto / Manual (0 db to 18 db) Gamma OFF( =1)/LUT Image adjustment function Sharpness, black level, knee In addition to the above, FD model color masking (6 color independent masking), painted black Power supply DC+12 V ±1 V (input from 12-pin connector), 48 V (PoE) Normal Power consumption Performance Operating Vibration endurance KP-FD500GV: Approx. 7.5 W (Approx. 625 ma) KP-F500GV: Approx. 7.8 W (Approx. 650 ma) KP-FD500GV: Approx. 7.8W (Approx. 650mA) KP-F500GV: Approx. 8.4W (Approx. 700mA) (at 2 pixel height) 0 C to +40 C / 90 %RH or less 10 C to +50 C / 90 %RH or less 20 C to +60 C / 70 %RH or less (without dew condensation) 15 to 200 to 15 Hz (98.6m/S 2 ), 10 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 44(W) x 29(H) x 72(D) mm (not including lens and protrusions) Approx. 140 g (without lens) KP-FD202GV: Approx. 7.8 W (Approx. 650 ma) KP-F202GV: Approx. 7.5 W (Approx. 625 ma) KP-FD202GV: Approx. 8.5W (Approx. 710mA) KP-F202GV: Approx. 8.4W (Approx. 700mA) (at 2 pixel height) Approx. 6.0 W (Approx. 500 ma) Approx. 6.6W (Approx. 550mA) (at 2 pixel height) KP-FD140GV KP-F140GV KP-FD83GV KP-F83GV 1/1.8-inch progressive scan interline CCD 1/2-inch progressive scan interline CCD (KP- (KP-FD83GV: ICX204AK, KP-F83GV: FD140GV: (ICX267AK, KP-F140GV: ICX267AL) ICX204AL) KP-FD33GV KP-FD33GV 1/3-inch progressive scan interline CCD (KP-FD33GV: ICX424AQ, KP-F33GV: ICX424AL) Total pixels 1434(H) x 1050(V) 1077(H) x 788(V) 692(H) x 504(V) Effective pixels 1392(H) x 1040(V) KP-FD83GV: 1034(H) x 779(V) KP-F83GV: 1036(H) x 779(V) 659(H) x 494(V) Pixel size 4.65 μm(h) x 4.65 μm(v) (Square pixel) 7.4 μm(h) x 7.4 μm(v) (Square pixel) Color filter (FD Model) RGB primary color mosaic filter Scanning area 6.32 mm(h) x 4.76 mm(v) 4.76 mm(h) x 3.57 mm(v) 4.88 mm(h) x 3.66 mm(v) / external C-mount (Flange focal distance: mm) Interface Gigabit Ethernet Protocol GigE Vision compliant Transfer rate 1 Gbps Image format KP-FD140GV/FD83GV/FD33GV: RGB 8/10/12 bit, YUV 8/10/12 bit, RAW 8/10/12 bit, MONO 8/10/12 bit KP-F140GV/F83GV/F33GV: MONO 8/10/12 bit Image size 1360(H) x 1024(V) 1024(H) x 768(V) 659(H) x 492(V) Sensitivity Electric shutter External trigger External sync signal Frame rate PRESET VARIABLE Mode Input Input level VD output Strobe out Full pixel readout KP-F140GV: 30 frames per second KP-FD140GV: 30 frames per second (YUV 8 bit, RAW 8/10/12 bit) 26 frames per second (RGB 8 bit, YUV 10/12 bit) 18 frames per second (RGB 10 bit) 13 frames per second (RGB 12 bit) Full pixel readout KP-F83GV: 36 frames per second KP-FD83GV: 36 frames per second (RGB 8 bit, YUV 8/10/12 bit, RAW 8/10/12 bit) 35 frames per second (RGB 10 bit) 24 frames per second (RGB 12 bit) KP-FD140GV/FD83GV/FD33GV: 2000 lx, F5.6, 3200K KP-F140GV/F83GV/F33GV: 2000 lx, F11, 3200K OFF/Auto (AES) / Manual (PRESET or VARIABLE), OFF is normal exposure (frame rate) 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000, From 10 second to approx. 1/ second 1/36, 1/60, 1/100, 1/250, 1/1000, 1/2000, Fixed shutter, One trigger, VD Sync, Reset control Via Gigabit Ethernet cable (Software trigger), 12-pin connector (Hardware trigger) +5 to 24 V 5 Vp-p ±0.3 V 5 Vp-p ±0.3 V Full pixel readout KP-F33GV: 90 frames per second KP-FD33GV: 90 frames per second (RGB 8 bit, YUV 8/10/12 bit, RAW 8/10/12 bit) 85 frames per second (RGB 10 bit) 55 frames per second (RGB 12 bit) 1/90, 1/250, 1/500, 1/1000, 1/2000, 1/4000, Binning mode (No FD model) OFF / ON Grabbing image area is adjustable at 2 pixel step. Frame rate improves when vertical size is reduced. ALC (Auto level control) Adjustable for video level White balance (FD model) ATW/MANUAL/One-push Gain Auto / Manual (0 db to 12 db) Auto / Manual (0 db to 18 db) Gamma OFF( =1)/LUT Image adjustment function Sharpness, Black level In addition to the above, FD model color masking (6 color independent masking), painted black, knee Power supply DC+12 V ±1 V (input from 12-pin connector), 48 V (PoE) Normal Power consumption Performance Operating Vibration endurance KP-FD140GV: Approx. 6.0 W (Approx. 500 ma) KP-F140GV: Approx. 5.5 W (Approx. 450 ma) KP-FD140GV: Approx. 7.0 W (Approx. 580 ma) KP-F140GV: Approx. 6.5 W (Approx. 540 ma) (at 2 pixel height) 0 C to +40 C / 90 %RH or less 10 C to +50 C / 90 %RH or less 20 C to +60 C / 70 %RH or less (without dew condensation) 15 to 200 to 15 Hz (98.6m/S 2 ), 10 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 44(W) x 29(H) x 72(D) mm (not including lens and protrusions) Approx. 140 g (without lens) KP-FD83GV: Approx. 4.3 W (Approx. 360 ma) KP-F83GV: Approx. 4.1 W (Approx. 340 ma) KP-FD83GV: Approx. 4.7 W (Approx. 390 ma) KP-F83GV: Approx. 4.8 W (Approx. 400 ma) (at 2 pixel height) KP-FD33GV: Approx. 4.7 W (Approx. 390 ma) KP-F33GV: Approx. 4.3 W (Approx. 360 ma) KP-FD33GV: Approx. 5.2 W (Approx. 430 ma) KP-F33GV: Approx. 5.0 W (Approx. 420 ma) (at 2 pixel height) 13 14

9 KP-FM1200 Mini (non-po) 1CMOS Black & White 1.7 CMOS M pixels (4096 x 3072) Max. 53 frames 55(W) 55(H) 45(D) mm KP-F520W KP-FD32W KP-F32W Mini (Auto Selection of Po or non-po) 1CCD Black & White 2/3 CCD 1CCD Color (RGB/YUV/RAW) 1CCD Black & White 1/3 CCD 5.01 M Pixels (2448 x 2048) VGA (0.33 M Pixels) (660 x 494) Max. 18 frames Max. 200 frames 29(W) 29(H) 29(D)mm KP-F520W KP-F32W/FD32W Rear View 1.7-inch global shutter system CMOS (CMV12000) Effective pixels 4096(H) x 3072(V) Pixel size 5.5 µm(h) x 5.5 µm(v) (square lattice) Sensing area 22.5 mm (H) x 16.9 mm (V) Aspect ratio 4 : 3 Frame rate (Max.) 53 frames per second (full pixel Horizontal drive frequency MHz Full configuration (84 MHz): khz Full configuration (42 MHz): khz Horizontal Scanning frequency Medium configuration (84 MHz): khz Medium configuration (42 MHz): khz Base configuration (84 MHz): khz Base configuration (42 MHz): khz Full configuration (84 MHz): Hz Full configuration (42 MHz): Hz Vertical Scanning frequency Medium configuration (84 MHz): Hz Medium configuration (42 MHz): Hz Base configuration (84 MHz): Hz Base configuration (42 MHz) : Hz Vertical subsampling Modes OFF (1 times) / 2 times / 3 times / 4 times / 5 times / 6 times / 7 times / 8 times / 9 times / 10 times TFL- Mount (Flange focal distance =17.5 mm), (F-mount adaptor: Option) Base configuration 2TAP (84 MHz or 42 MHz) Medium configuration 4TAP (84 MHz or 42 MHz) Full configuration 8TAP (84 MHz or 42 MHz) Output image size: 4096(H) 3072(V)(pixel Resolution Horizontal/Vertical: 3000 TV lines Sensitivity 400 lx, F5.6, 3200 K (Exposure time: 100μs) S/N 48 db OFF, 1/60, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/10000, 1/20000 second OFF is normal exposure (frame rate) or changeable by variable shutter (40.5 μs to 1.0 s, 49.1 μs step) Gain 1 to 4 times Offset level 0/255 to 127/255 Gamma =1 Frame on Mode Fixed shutter (8 steps or variable), ONE trigger mode demand Trigger input Camera Link (CC1) or DCIN/SYNC connector Selectable start position and height of picture grabbing in 4H step, Up to 8 areas can be set Pulse output OFF/FLASH OUT/VD OUT Power supply voltage 12 ± 1 VDC Current consumption Approx. 330 ma (approx. 4 W) Performance 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH, without dew condensation Vibration endurance 10 to 55 Hz (2.37 to 71.7 m/s 2 ), Sweep 1 minute, 30 minutes for each 3 axis m/s2 (Once for each side of top, under, left and right) 55 (W) x 55 (H) x 45 (D) mm (Not including mount protrusions) Approx. 250 g KP-F520W KP-FD32W KP-F32W 2/3-inch progressive scan interline CCD 1/3-inch progressive scan interline CCD Effective pixels 2448(H) x 2048(V) 660(H) x 494(V) Pixel size 3.45 µm (H) x 3.45 µm (V) (square lattice) 7.4 µm (H) x 7.4 µm (V) (square lattice) Color filter RGB primary color mosaic filter Sensing area 8.47 mm (H) x 7.10 mm (V) 4.88 mm (H) x 3.66 mm (V) Aspect ratio 5 : 4 4 : 3 Frame rate 18 frames per second (full pixel 200 frames per second (full pixel Horizontal drive frequency MHz MHz Horizontal Scanning frequency khz khz Vertical Scanning frequency Hz Hz (vertical 2 pixel addition) Hz C-mount (Flange focal distance = mm Camera Link Base configuration: MHz x 2TAP 8 bit / 10 bit / 12 bit Camera Link Base configuration: MHz Output image size: 2448(H) x 2048(V) (full pixel Output image size: 660(H) x 494(V) (full pixel Resolution Horizontal / Vertical: 2000 TV Line Horizontal / Vertical: 490 TV Line Sensitivity 400 lx, F8, 3200K 2000 lx, F5.6, 3200K 400 lx, F4, 3200K Minimum illumination 2.0 lx (F1.4, MAX GAIN) Signal noise to ratio 50 db OFF, 1/18, 1/60, 1/100, 1/250, 1/1000, 1/2000, OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/ second) =1 or Variable Camera Link Base configuration: MHz x 2TAP OFF, 1/200, 1/250, 1/500, 1/1000, 1/2000, 1/4000, OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/ second) Gamma Frame on Mode Fixed shutter mode (8 steps or variable), ONE trigger mode, VD reset mode demand Trigger input Camera Link (CC1) or DCIN/SYNC connector Selectable start position and height of picture grabbing in 1H step. Pulse output OFF, FLASH OUT or VD OUT White balance ATW/MANUAL/One-push Binning mode OFF / ON (vertical) Image adjustmant function White flaw correction, Left and right balance adjustment, Sharpness, 6 color independent Knee adjustmant masking, brightness Sharpness, Black level, knee Power supply voltage 12 ± 1 VDC Current consumption Approx. 265 ma (Approx W) Approx. 250 ma (Approx. 3 W) Performance 0 to + 40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to + 50 ºC (+14 to +122 ºF), less than 90 % RH 20 to + 60 ºC (4 to +140 ºF), less than 70 % RH (without dew condensation) Vibration endurance 10 to 55 Hz (2.37 to 71.7 m/s 2 ), Sweep 1 minute, 30 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 29 (W) x 29 (H) x 29 (D) mm (not including mount protrusions) Approx. 55 g

10 KP-FD510W KP-FR500W KP-F500W KP-FD510W Mini (Auto Selection of Po or non-po) KP-FD500P/S P: Mini (Po) KP-FD202P/S S: KP-FD140P/S Mini (Non-Po) KP-F145W Mini (Auto Selection of Po or non-po) 1CCD Color (RGB) 1CCD Color (RAW) 1CCD Black & White 1CCD Color (RGB) 1CCD Black & White (Near infrared sensitivity) KP-F500W, KP-FR500W,KP-FD500P/S, KP-F145W, KP-FD202P/S, KP-FD140P/S 2/3 CCD 1/1.8 CCD 1/2 CCD 2/3 CCD KP-F500W, KP-FR500W, KP-FD500P/S, KP-F145W 5.01 M Pixels (2448 x 2048) UXGA(2.01M Pixels) (1628 x 1236) SXGA(1.45M Pixels) (1392 x 1040) KP-FD510W Max. 12 frames Max. 16 frames Max. 30 frames KP-FD202P/S, KP-FD140P/S 44(W) 44(H) 41(D) mm KP-FD510W KP-FD500P/S 2/3-inch progressive scan interline CCD (ICX625AQ) KP-FR500W KP-F500W KP-FD202P/S KP-FD140P/S 1/1.8-inch progressive scan interline CCD (ICX274AQ) 1/2-inch progressive scan interline CCD (ICX267AK) KP-145W 2/3-inch progressive scan interline CCD (ICX285AL) Total pixels 2448(H) x 2048(V) 1688(H) x 1248(V) 1434 (H) x 1050 (V) 1432 (H) x 1050 (V) Effective pixels 2448(H) x 2048(V) 1628(H) x 1236(V) 1392 (H) x 1040 (V) 1392 (H) x 1040 (V) Pixel size 3.45 µm (H) x 3.45 µm (V) (square lattice) 4.4 µm (H) x 4.4 µm (V) (square lattice) 4.65 µm (H) x 4.65 µm (V) (square lattice) Color filter RGB primary color mosaic filter (FR/FD model) Sensing area 8.45 mm (H) x 7.07 mm (V) 8.47 mm (H) x 7.10 mm (V) 7.13 mm (H) x 5.37 mm (V) 6.32 mm (H) x 4.76 mm (V) 8.98 mm (H) x 6.71 mm (V) Aspect ratio 5 : 4 4 : 3 Frame rate 12 frames per second (full pixel 16 frames per second (full pixel 32 frames per second 30 frames per second (full pixel (vertical 2 pixel addition) FR model: No vertical 2 pixel addition) Horizontal drive frequency MHz MHz MHz MHz Horizontal Scanning frequency khz khz khz khz Vertical Scanning frequency Video output Sensitivity Interface/ Protocol Output format Output image size Minimum illumination Signal noise to ratio Frame on Mode demand Trigger input ALC (Auto level control) Gain Hz Hz (full pixel Hz (vertical 2 pixel additionmode) Hz Hz FR model: No vertical 2 pixel addition) C-mount (Flange focal distance = mm Camera Link MHz Camera Link Camera Link MHz Camera Link MHz Base configuration (1ch: SDR Base configuration: connector x 1pc.) MHz x 2TAP Base configuration (1ch: SDR connector x 1pc.) Medium configuration (2ch: SDR Medium configuration: Medium configuration (2ch: SDR connector x 2pcs) connector x 2pcs) MHz x 4TAP 24 bits (Base configuration) 30 bits (Medium configuration) 36 bits (Medium configuration) 2448 (H) x 2048 (V) (full pixel 2000 lx, F11, 3200 K 5 lx (F1.4, MAX GAIN) 48 db OFF, 1/12, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second OFF is normal exposure (frame rate) or changeable by variable shutter (from 10 to 1/ second) 8 bit / 10 bit / 12 bit 24 bits (Base configuration) 30 bits (Medium configuration) 36 bits (Medium configuration) 2448(H) x 2048(V) (full pixel 1620(H) x 1220(V) (full pixel 1360(H) x 1024(V) (full pixel 30 frames per second (full pixel 60 frames per second (vertical 2 pixel addition) Hz (full pixel Hz (vertical 2 pixel addition mode) Camera Link Base configuration: MHz x 2TAP 8 bit / 10 bit / 12 bit 1392(H) x 1040(V) (full pixel 500 lx, F11, 3200 K FR Model: 2000 lx, F8, 2000 lx, F5.6, 3200 K 400 lx, F8, 3200 K 3200K 1.0 lx (F1.4, MAX GAIN) FR model: 15 lx (F1.4 GAIN 10 lx (F1.4, MAX GAIN) 2.0 lx (F1.4, MAX GAIN) MAX) OFF, 1/16, 1/60, 1/100, 1/250, 1/1000, 1/2000, OFF is normal exposure (frame rate) or changeable by variable shutter (from 10 to 1/ second) OFF, 1/30, 1/60, 1/100, 1/250, 1/1000, 1/2000,. OFF is normal exposure (frame rate) or changeable by variable shutter (from 10 to 1/ second) (A) Fixed shutter mode (8 steps or variable) (B) ONE trigger mode (C) VD reset mode Trigger input: Camera Link (CC1) or DCIN/SYNC connector Camera Link (CC1) or DCIN/SYNC connector Selectable start position and height of picture grabbing in 1H step. Mode: AGC (Auto gain control), AES (Auto electric shutter), AGC & AES Video Level: Adjustable Auto/Manual (0 to +12 db) (Approx db step) Auto/Manual (0 to +18dB) (Approx db step) Mode: AGC (Auto gain control), AES (Auto electric shutter), AGC & AES Video Level: Adjustable Auto/Manual (0 to +18 db) (Approx db step) Auto/Manual (-6 to +18 db) (Approx db step) White balance ATW / MANUAL / One-push ATW / MANUAL / One-push Gamma OFF ( =1) / LUT =1 OFF ( =1) / LUT =1 Color masking OFF / ON (6 vector independent masking) OFF / ON (6 vector independent masking) Paint black Adjustable Adjustable Sharpness Adjustable Adjustable Brightness Adjustable Adjustable Knee Adjustable Adjustable Power supply voltage 12 ± 1 VDC Current consumption Approx. 310 ma (Approx. 3.7 W) Approx. 260 ma (Approx. 3.1 W) *MAX partial scan 1H: Approx. 330 ma (Approx. 4.0 W) Approx. 340 ma (Approx. 4.1 W) *MAX partial scan 1H: Approx. 415 ma (Approx. 5.0 W) Performance 0 to + 40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to + 50 ºC (+14 to +122 ºF), less than 90 % RH 20 to + 60 ºC (4 to +140 ºF), less than 70 % RH (without dew condensation) 10 to 55 Hz (2.37 to 71.7 m/s 2 ), Sweep 1 minute, 30 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 44 (W) x 44 (H) x 41 (D) mm (not including mount protrusions) Approx. 110 g Vibration endurance Approx. 300 ma (Approx. 3.6 W) Approx. 230 ma (Approx. 2.8 W) *MAX partial scan 1H: Approx. 350 ma (Approx. 4.2 W) 17 18

11 KP-FM500W KP-FMR400W KP-FM400W KP-FMR200W KP-FM200W Mini (Auto Selection of Po or non-po) 1CMOS Black & White 2/3 CMOS 1CMOS Color (RAW) 1CMOS Black & White 1CMOS Color (RAW) 1CMOS Black & White 1 CMOS 2/3 CMOS 5.01 M pixels (2448 x 2048) 4.19 M pixels (2048 x 2048) 2.23 M pixels (2048 x 1088) Max. 163 frames Max. 150 frames Max. 280 frames 44(W) 44(H) 41(D)mm KP-FMD200P 1CMOS Color (RGB) UXGA(1.92 M pixel) Max. 20 frames (1600 x 1200) KP-FM200P 1CMOS Black & White Max. 53 frames Mini (Po) KP-FMD100P 1CMOS Color (RGB) SXGA(1.31 M pixel) Max. 30 frames (1280 x 1024) KP-FM100P 1CMOS Black & White Max. 61 frames 29(W) x 29(H) x 20(D) mm KP-FM500W differ in the number and location of the screw holes, and different printing position on the rear. KP-FM500W KP-FM400W/FRM400W/ FM200W/FMR200W KP-FM500W KP-FMR400W KP-FM400W KP-FMR200W KP-FM200W 2/3-inch global shutter CMOS 1-inch global shutter CMOS (CMV4000) 2/3-inch global shutter CMOS (CMV2000) Effective pixels 2448 (H) x 2048 (V) 2048 (H) x 2048 (V) 2048 (H) x 1088 (V) Pixel size 3.45 µm (H) x3.45 µm (V) (square lattice) 5.5 µm (H) x 5.5 µm (V) (square lattice) Color filter (for FMR model) RGB primary color mosaic filter Sensing area 8.45 mm (H) x 7.07 mm (V) mm (H) x mm (V) mm (H) x mm (V) Aspect ratio 6 : 5 1 : 1 2 : 1 Frame rate 163 frames per second (full pixel 150 frames per second (full pixel 280 frames per second (full pixel Pixel frequency MHz MHz khz (High speed mode, MHz) Full configuration khz ( MHz) khz (80 MHz), khz (40 MHz) Horizontal khz ( MHz) scanning khz ( MHz) Medium configuration frequency khz ( MHz) khz (80 MHz), khz (40 MHz) Base configuration khz ( MHz) khz ( MHz) khz (80 MHz), khz (40 MHz) Full configuration Hz (High speed mode, MHz) Hz ( MHz) Hz (80 MHz), Hz (40 MHz) Hz (80 MHz), Hz (40 MHz) Vertical Hz ( MHz) scanning Hz ( MHz) Medium configuration frequency Hz ( MHz) Hz (80 MHz), Hz (40 MHz) Hz (80 MHz), Hz (40 MHz) Base configuration Hz ( MHz) Hz ( MHz) Hz (80 MHz), Hz (40 MHz) Hz (80 MHz), Hz (40 MHz) C-mount (Flange focal distance = mm) Digital Full configuration 10TAP ( MHz or MHz) 8TAP (80 MHz or 40 MHz) Full configuration 8TAP (80 MHz or 40 MHz) output Medium configuration 4TAP ( MHz or MHz) 4TAP (80 MHz or 40 MHz) 4TAP (80 MHz or 40 MHz) (Camera Base configuration 3TAP ( MHz or MHz) 2TAP (80 MHz or 40 MHz) 2TAP (80 MHz or 40 MHz) Link) Output image size 2448(H) x 2048(V) (full pixel 2048(H) x 2048(V) (full pixel 2048(H) x 1088(V) (full pixel Sensitivity 400 lx, F8, 3200K KP-FMR400W: 2000 lx, F16, 3200K KP-FMR200W: 2000 lx, F11, 3200K KP-FM400W: 400 lx, F16, 3200K KP-FM200W: 400 lx, F5.6, 3200K Signal noise to ratio 50 db 48 db OFF, 1/24, 1/100, 1/250, 1/500, 1/1000, 1/2000, OFF is normal exposure (frame rate) or changeable by variable shutter OFF, 1/38, 1/100, 1/250, 1/500, 1/1000, 1/2000, OFF is normal exposure (frame rate) or changeable by variable shutter Gamma? = 1 Frame on Mode Fixed shutter mode (8 steps or variable), ONE trigger mode, Burst trigger mode demand Trigger input Camera Link (CC1) or DCIN/SYNC connector Selectable start position and height of picture grabbing in 1H step. Power supply voltage 12 ± 1 VDC Current consumption Approx. 320 ma (Approx. 3.8 W) Approx. 230 ma (Approx W) Performance 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH, without dew condensation) Vibration endurance 10 to 55 Hz (2.37 to 71.7 m/s 2 ), Sweep 1 minute, 30 minutes for each 3 axis m/s 2 (Once for each side of top, under, left and right) 44 (W) x 44 (H) x 41 (D) mm(not including mount protrusions) Approx. 130 g OFF, 1/71, 1/100, 1/250, 1/500, 1/1000, 1/2000,. OFF is normal exposure (frame rate) or changeable by variable shutter KP-FMD200P KP-FM200P KP-FMD100P KP-FM100P 1/1.8-inch CMOS 1/1.8-inch CMOS 1/1.8-inch CMOS 1/1.8-inch CMOS Effective pixels 1600(H) x 1200(V) 1280 (H) x 1024 (V) Pixel size 4.5 µm(h) x 4.5 µm(v)(square lattice) 5.3 µm(h) x 5.3 µm(v)(square lattice) Color filter RGB primary color mosaic filter RGB primary color mosaic filter Sensing area 7.2 mm (H) x 5.4 mm (V) 6.78 mm (H) x 5.43 mm (V) Aspect ratio 4 : 3 5 : 4 Frame rate 20 frames per second (full pixel 53 frames per second (full pixel 30 frames per second (full pixel Horizontal Drive Frequency 42 MHz 114 MHz 42 MHz 114 MHz Horizontal scanning frequency khz khz khz khz Vertical scanning frequency Hz Hz Hz Hz C-mount (Flange focal distance = mm) Digital output (CameraLink) (Po) Base configuration: MHz Base configuration: MHz x 2 TAP Base configuration: MHz 61 frames per second (full pixel Base configuration: MHz x 2 TAP 24 bits 8 bits / 10 bits 24 bits 8 bits / 10 bits Output image size: 1600 (H) x 1200 (V) (full pixel Output image size: 1280 (H) x 1024 (V) (full pixel Sensitivity 2000lx, F5.6, 3200K 400lx, F2.8, 3200K 2000lx, F8, 3200K 400lx, F4, 3200K S/N 45 db OFF, 1/60, 1/100, 1/250, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 OFF is normal exposure (frame rate) or changeable by variable shutter(minimum 1/ second) Gamma = 1 Frame on Mode demand Trigger input Gain Power supply voltage Current consumption Performance Operation Vibration endurance Fixed shutter mode (8 steps or variable), Camera Link (CC1) Selectable start position and height of picture grabbing in 1 pixel step.(minimum erea: 20x20 pixels) Digital: 1 to 2 times (128 steps) Analog: 1/1.33/2 times 12 ± 1 VDC Approx. 80mA (Approx. 0.96W) 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH (without dew condensation) 10 to 200 Hz (98 m/s 2 ), Sweep 10 minute, 30 minutes for each 3 axis 686 m/s 2 (Once for each side of top, under, left and right) 29(W) x 29(H) x 20(D) mm (Not including mount protrusions) Approx. 35 g 19 20

12 KP-FR230P/S KP-F230P/S KP-FR31P/S KP-F31P/S KP-FBR30P/S P: Mini (Po) S: Mini (Non-Po) 1CCD Color(RAW) 1/1.8 1CCD Black & White CCD 1CCD Color(RAW) 1CCD Black & White 1/3" CCD 1CCD Color(RAW) UXGA (2.01 M pixels) (1628 x 1236) VGA (0.33 M Pixels) (659 x 494) Max. 30 frames Max. 120 frames Max. 60 frames 29(W) x 29(H) x 38(D) mm Camera Head: 12(W) x 12.5(H) x 47.5(L)mm KP-FR200P/S 1CCD Color(RAW) 1/1.8 UXGA(2.01 M pixel) P: KP-F200P/S CCD Mini (Po) 1CCD Black & White (1628 x 1236) KP-FR80P/S 1CCD Color(RAW) XGA(0.81 M pixel) KP-F80P/S S: 1CCD Black & White 1/3" (1034 x 779) Mini KP-FR30P/S 1CCD Color(RAW) CCD (Non-Po) VGA(0.33M pixel) KP-F30P/S 1CCD Black & White (659 x 494) Max. 15 frames Max. 26 frames Max. 60 frames 29(W) x 29(H) x 29(D) mm KP-F230P/S, KP-FR230P/S, KP-FR31P/S, KP-F31P/S P Model S Model KP-FBR30P/S P Model S Model KP-F230P/S, KP-FR230P/S, KP-F31P/S, KP-FR31P/S *S type and P type is different from the presence or absence of the screw holes and the rear connector. Photos P type P Model S Model of CCU P Model S Model KP-F200P/S, KP-FR200P/S, KP-F80P/S, KP-FR80P/S, KP-F30P/S, KP-FR30P/S *S type and P type is different from the rear connector. Photos P type KP-FR230S/P KP-F230S/P KP-FR31S/P KP-F31S/P 1/1.8-inch interline CCD (ICX274AL) 1/3-inch interline CCD (ICX424AL) Total pixels 1688 (H) x 1248 (V) 692 (H) x 504 (V) Effective pixels 1628 (H) x 1236 (V) 659 (H) x 494 (V) Pixel size 4.4 µm (H) x 4.4 µm (V) (square lattice) 7.4 µm (H) x 7.4 µm (V) (square lattice) Color filter (FR Model) RGB primary color mosaic filter Sensing area 7.16 mm (H) x 5.44 mm (V) 4.88 mm (H) x 3.66 mm (V) Aspect ratio 4 : 3 Frame rate 30 frames per second(full pixel 54 frames per second (vertical 2 pixel addition) FR model: No vertical 2 pixel addition) 120 frames per second (full pixel 219 frames per second(vertical 2 pixel addition) FR model: No vertical 2 pixel addition) KP-FBR30S/P 60 frames per second (full pixel Horizontal drive frequency MHz MHz MHz Horizontal scanning frequency 37.5 khz, khz (vertical 2 pixel addition) khz, khz (vertical 2 pixel addition) khz Vertical scanning frequency Hz (full pixel Hz (vertical 2 pixel addition mode) FR model: No vertical 2 pixel addition) Hz (full pixel Hz (vertical 2 pixel addition mode) FR model: No vertical 2 pixel addition) Hz C-mount (Flange focal distance = mm) Special mount (Flange focal distance = 8.4 mm) Digital output (Camera Link) Base configuration: MHz x 2 TAP (Maximum cable length is 10 m) Output image size: 1628 (H) x 1236 (V) (full pixel Digital output (Camera Link) Base configuration: MHz x 2 TAP (Maximum cable length is 10 m) Output image size: 659 (H) x 494 (V) (full pixel Digital output (Camera Link) Base configuration: MHz (Maximum cable length is 10 m) Output image size: 659 (H) x 494 (V) (full pixel Resolution Horizontal / Vertical: 1200 TV lines Horizontal: 500 TV lines / Vertical: 490 TV lines 500 lx, F5.6, 3200 K 550 lx, F4, 3200 K Sensitivity 2000 lx, F4, 3200 K FR Model: 2000 lx, F5.6, 3200 K FR Model: 2000 lx, F4, 3200 K 3.9 lx (F1.4, MAX GAIN) 8.6 lx (F1.4, MAX GAIN) Minimum illumination 35 lx (F1.4, MAX GAIN) FR Model: 20 lx (F1.4, MAX GAIN) FR Model: 35 lx (F1.4, MAX GAIN) Signal noise to ratio 45 db 50 db OFF, 1/30, 1/60, 1/125, 1/250, 1/1000, 1/2000, OFF, 1/120, 1/250, 1/500, 1/1000, 1/2000, OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/4000, OFF is normal exposure (frame rate) or changeable OFF is normal exposure (frame rate) or changeable OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/ second) by variable shutter (minimum 1/ second) by variable shutter (minimum 1/ second) Gamma =1 Frame on Mode demand (A) Fixed shutter mode (8 steps or variable) (B) ONE trigger mode Trigger input Camera Link (CC1) Selectable start position and height of picture grabbing in 1H step. Power supply voltage 12 ± 1 VDC Current consumption Approx. 270 ma (approx. 3.2 W) *MAX partial scan 1H: Approx. 360 ma (approx. 4.3 W) Approx. 190 ma (approx. 2.3 W) *MAX partial scan 1H: Approx. 230 ma (approx. 2.8 W) Performance 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH (without dew condensation) Vibration endurance 10 to 200 Hz (98 m/s 2), Sweep 10 minute, 30 minutes for each 3 axis 686 m/s 2 (Once for each side of top, under, left and right) 29 (W) x 29 (H) x 38 (D) mm (Not including protrusions) Approx. 50 g Approx. 200 ma (approx. 2.4 W) *MAX partial scan 1H: Approx. 250 ma (approx. 3.0 W) Head: 12 (W) x 12.5 (H) x 47.5 (D) mm CCU: 29 (W) x 29 (H) x 38 (D) mm Head: Approx. 18 g CCU: Approx. 50 g (without cable) KP-FR200P/S KP-F200P/S KP-FR80P/S KP-F80P/S KP-FR30P/S KP-F30P/S 1/1.8-inch interline CCD (ICX274AL) 1/3-inch interline CCD (ICX204AL) 1/3-inch interline CCD (ICX424AL) Total pixels 1688 (H) x 1248 (V) 1077 (H) x 788 (V) 692 (H) x 504 (V) Effective pixels 1628 (H) x 1236 (V) 1034 (H) x 779 (V) 659 (H) x 494 (V) Pixel size 4.4 µm (H) x 4.4 µm (V) (square lattice) 4.65 µm (H) x 4.65 µm (V) (square lattice) 7.4 µm (H) x 7.4 µm (V) (square lattice) Color filter (FR Model) RGB primary color mosaic filter Sensing area 7.16 mm (H) x 5.44 mm (V) 4.76 mm (H) x 3.57 mm (V) 4.88 mm (H) x 3.66 mm (V) Aspect ratio 4 : 3 Frame rate 15 frames per second (full pixel 36 frames per second (full pixel 60 frames per second (full pixel Horizontal drive frequency MHz MHz Horizontal scanning frequency khz khz khz Vertical scanning frequency Hz Hz Hz C-mount (Flange focal distance = mm) Digital output (Camera Link) Base configuration: MHz (Maximum cable length is 10 m) Digital output (Camera Link) Base configuration: MHz (Maximum cable length is 10 m) Output image size: 1628 (H) x 1236 (V) (full pixel Output image size: 1024 (H) x 768 (V) (full pixel Resolution Horizontal / Vertical: 1200 TV lines Horizontal / Vertical: Approx. 800 TV lines Sensitivity Minimum illumination Signal noise to ratio 400 lx, F4, 3200 K FR model: 2000 lx, F8, 3200 K 1.0 lx (F1.4, MAX GAIN, without IR cut filter) FR model: 5.0 lx (F1.4, MAX GAIN) 50 db 400 lx, F2.8, 3200 K FR model: 2000 lx, F4, 3200 K 1.0 lx (F1.4, MAX GAIN, without IR cut filter) FR model: 20 lx (F1.4, MAX GAIN) Digital output (Camera Link) Base configuration: MHz (Maximum cable length is 10 m) Output image size: 659 (H) x 494 (V) (full pixel 400 lx, F4, 3200 K FR model: 2000 lx, F5.6, 3200 K 1.0 lx (F1.4, MAX GAIN, without IR cut filter) FR model: 10 lx (F1.4, MAX GAIN) OFF, 1/15, 1/60, 1/125, 1/250, 1/1000, 1/2000, OFF, 1/36, 1/60, 1/125, 1/250, 1/1000, 1/2000, OFF, 1/60, 1/250, 1/500, 1/1000, 1/2000, 1/4000, OFF is normal exposure (frame rate) or changeable OFF is normal exposure (frame rate) or changeable OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/ second) by variable shutter (minimum 1/ second) by variable shutter (minimum 1/ second) Gamma = 1 Frame on demand Mode Fixed shutter mode (8 steps or variable) ONE trigger mode VD reset mode Fixed shutter mode (8 steps or variable) ONE trigger mode Reset control mode VD reset mode Trigger input Camera Link (CC1) *When Reset control mode CC1 and CC2 are used Selectable start position and height of picture grabbing in 1H step. Power supply voltage 12 ± 1 VDC Current consumption Approx. 170 ma (approx. 2.1 W) Approx. 120 ma (approx. 1.5 W) Approx. 120 ma (approx. 1.5 W) Performance 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH (without dew condensation) Vibration endurance 10 to 200 Hz (98 m/s 2), Sweep 10 minute, 30 minutes for each 3 axis 686 m/s 2 (Once for each side of top, under, left and right) 29 (W) x 29 (H) x 29 (D) mm (Not including protrusions) Approx. 50 g

13 KP-FMR830 Between the control unit and cameras: Po-Lite Composite image output from the control unit: Mini (Non-Po) Cameras: 1CMOS Color (RAW) Composite image: Color (RGB) 1/3 CMOS Cameras(Per Single camera): VGA(640 x 480) Composite image (by 8 pieces of camera): (640 x 3840) g Output at 30fps ( pixels) by combining the color image of camera 8 units (VGA). Composite image Readout: Max. 30 frames One Camera: 21.5(W) 21.5(H) 21.5(D)mm 1/1.8 KP-F200Lite 1CCD UXGA(2.01 M pixel)(1628 x 1236 ) Max. 15 frames CCD 29(W) 29(H) Black & KP-F80Lite 29(D)mm White 1/3 XGA(0.81 M pixel)(1034 x 779) Max. 36 frames KP-F30Lite Po-Lite CCD VGA(0.33 M pixel)(659 x 494) Max. 60 frames KP-FM30Lite 1CMOS 1/3 Black & VGA(0.36 M pixel)(752 x 480) Max. 90 frames 21.5(W) 21.5(H) 21.5(D)mm KP-FBM30Lite is an integrated KP-FBM30Lite CMOS White cable KP-F200Lite, KP-F80Lite, KP-F30Lite KP-FM30Lite KP-FBM30Lite KP-F200Lite, KP-F80Lite,KP-F30Lite Camera control Unit KP-FM30Lite, KP-FBM30Lite *KP-FBM30Lite is an integrated Po cable MR-FMR30Lite (Camera) (Per unit) 1/3-inch CMOS Effective pixels 752 (H) x 480 (V) Pixel size 6.0 µm (H) x 6.0 µm (V) (square lattice) Color filter RGB primary color mosaic filter Sensing area 4.51 mm (H) x 2.88 mm (V) Frame rate 90 frames per second (full pixel Horizontal drive frequency MHz Horizontal scanning frequency khz Vertical scanning frequency 90 Hz NF-mount (Flange focal distance = 12 mm) Digital output (Between the camera and the CCU): Po-Lite: MHz Output image size: 752 (H) x 480 (V) (full pixel Resolution Horizontal / Vertical: 480 TV lines Sensitivity 500 lx, F4, 3200K Minimum illumination 32 lx (F1.4, MAX GAIN) Signal noise to ratio 50 db OFF 1/90, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/10000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/20000 second, Maximum 1/90 second) Frame on demand Fixed shutter (7 steps or variable) Power supply voltage 12 ± 1 VDC Current consumption Approx. 80 ma (Approx W) Performance 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH (without dew condensation) Vibration endurance 15 to 200 Hz (98 m/s 2), Sweep 10 minute, 30 minutes for each 3 axis 700 m/s 2 (Once for each side of top, under, left and right) 21.5 (W) x 21.5 (H) x 21.5 (D) mm (Not including protrusions) Approx. 20 g Frame rate I/O signal MR-830CCU (Camera Control Unit) Trigger input CameraLink: 80MHz Base configuration: 24bit (R:8bit G:8bit B:8bit) Output image size: 640(H) x 3840(V) (full pixel, 640(H) x 480(V) x Camera 8 units *Upper and lower boundary line (1 line and 480 line) of each camera is not used, please use the cut out within the 478 line 30 frames per second Input from Camera Link connector: LVDS level Input from DCIN/SYNC connector: High: +2.5 to +5.0 V Low: 0 to +0.3 V FVAL output High: +5 V Low: 0 V Power supply voltage DC12 V ± 1 V Current consumption Approx ma (Approx. 15 W) (eight cameras connection) Performance 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH Operation 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH (without dew condensation) Vibration endurance 15 to 200 Hz (98 m/s 2), Sweep 10 minute, 30 minutes for each 3 axis 700 m/s 2 (Once for each side of top, under, left and right) 150 (W) x 34 (H) x 100 (D) mm (Not including protrusions) Approx. 570 g Component KP-FMR830 Products Model Quantity Camera MR-FM30Lite 8 Po-Lite cabel (Camera connection: Right Angle type) MR-050Lite 8 (Cable length: 500mm) Camera control unit MR-830CCU 1 KP-F200Lite KP-F80Lite KP-F30Lite KP-FM30Lite KP-FBM30Lite 1/1.8-inch interline CCD (ICX274AL) 1/3-inch interline CCD (ICX204AL) 1/3-inch interline CCD (ICX424AL) 1/3-inch CMOS Total pixels 1688 (H) x 1248 (V) 1077 (H) x 788 (V) 692 (H) x 504 (V) Effective pixels 1628 (H) x 1236 (V) 1034 (H) x 779 (V) 659 (H) x 494 (V) 752 (H) x 480 (V) Pixel size 4.4 µm (H) x 4.4 µm (V) (square lattice) 4.65 µm (H) x 4.65 µm (V) (square lattice) 7.4 µm (H) x 7.4 µm (V) (square lattice) 6.0 µm (H) x 6.0 µm (V) (square lattice) Sensing area 7.16 mm (H) x 5.44 mm (V) 4.76 mm (H) x 3.57 mm (V) 4.88 mm (H) x 3.66 mm (V) 4.51 mm (H) x 2.88 mm (V) Aspect ratio 4 : 3 5 : 3 Frame rate 15 frames per second (full pixel 36 frames per second (full pixel 60 frames per second (full pixel 90 frames per second (full pixel Horizontal drive frequency MHz MHz MHz MHz Horizontal scanning frequency khz (full pixel khz (full pixel khz (full pixel khz (full pixel Vertical scanning frequency Hz (full pixel Hz (full pixel Hz (full pixel 90 Hz C-mount (Flange focal distance = mm) NF-mount (Flange focal distance = 12 mm) Digital output (Po-Lite) Digital output (Po-Lite) Base configuration: MHz Base configuration: MHz (Maximum cable length is 10 m) (Maximum cable length is 10 m) Output image size: 1628 (H) x 1236 Output image size: 1024 (H) x 768 (V) (full pixel (V) (full pixel Digital output (Po-Lite) Base configuration: MHz (Maximum cable length is 10 m) Output image size: 659 (H) x 494 (V) (full pixel Digital output (Po-Lite) Base configuration: MHz (Maximum cable length is 10 m) (KP-FBM30Lite: Cable length is 2 m) Output image size: 752 (H) x 480 (V) (full pixel Resolution Horizontal / Vertical: 1200 TV lines Horizontal / Vertical: 800 TV lines Horizontal: 500 TV lines / Vertical: 490 TV lines Horizontal / Vertical: 480 TV lines Sensitivity 400 lx, F5.6, 3200 K 400 lx, F4, 3200 K 400 lx, F5.6, 3200 K 400 lx, F2.8, 3200 K Minimum illumination 1.0 lx (F1.4, MAX GAIN) 16 lx (F1.4, MAX GAIN) Signal noise to ratio 50 db OFF 1/15, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (Minimum 1/ second) OFF 1/36, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF 1/60, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000, 1/50000 OFF 1/90, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/10000 second. second. OFF is normal exposure (frame rate) OFF is normal exposure (frame rate) OFF is normal exposure (frame rate) or changeable by variable shutter or changeable by variable shutter or changeable by variable shutter (Minimum 1/ second) (Minimum 1/ second) (Minimum 1/ second) Gamma = 1 Frame on demand (A) Fixed shutter (8 steps or variable) (B) ONE trigger mode (C) VD reset mode Fixed shutter (7 steps or variable) Selectable start position and height of picture grabbing in 1H step. Power supply voltage 12 ± 1 VDC Current consumption Approx. 170 ma (Approx. 2.1 W) Approx. 120 ma (Approx. 1.5 W) Approx. 80 ma (Approx W) Performance Operation Vibration endurance 10 to 200 Hz 98 m/s m/s 2 0 to +40 ºC (+32 to +104 ºF), less than 90 % RH 10 to +50 ºC (+14 to 122 ºF), less than 90 % RH 20 to +60 ºC (4 to 140 ºF), less than 70 % RH (without dew condensation) 29 (W) x 29 (H) x 29 (D) mm (Not including protrusions) Approx. 50 g 21.5 (W) x 21.5 (H) x 21.5 (D) mm (Not including protrusions) (Not including cable for KP-FBM30Lite) Approx. 20 g (Not including cable for KP-FBM30Lite) 23 24

14 HDTV Cameras HDTV Cameras DK-H100 DK-Z50 HDTV HD-SDI/SD-SDI 2/3 IT-3CCD /50i, 480/59.94i, 576/50i g High S/N with HD-SDI Outstanding Signal-to-noise ratio >60 db (>58 db for DK-Z50) measured on the HD-SDI (1080i) output. g 14-bit ADC with the latest generation Hitachi DSP High dynamic range and color fidelity are achieved by employing 14-bit analog-to digital converters on the RGB CCDs output. Hitachi is a leading developer for high performance CPU & DSP in broadcasting fields. g High resolution (DK-H100) The latest generation 2/3-inch 2.3 million pixels CCD with micro lenses and multi speed signal processing circuits provide a horizontal resolution performance of 1100 TV lines (luminance channel). g High resolution (DK-Z50) The latest generation 2/3-inch CCD with micro lenses and spatial-offset processing technologies provide a horizontal resolution performance of 800 TV lines (luminance channel). g Small & light weight head DK-H TV Line 800 TV Line 99(W) 105(H) 155(D)mm g Versatile CCD shutter Five preset shutter speeds Lock scan the camera video to image from asynchronous computer monitors, video walls or projectors without flicker Automatic electric shutter (AES) maintains the video level with a fixed lens f-stop g DSP provide advanced image handling and adjustment functions Knee saturation and auto-knee 12-vector and linear matrix masking Skin tone masking Automatic skin tone detail circuit Variable detail boost frequency Ultra gamma Gray scale automatic setup Automatic shading correction g Extensive user-friendly features Eight scene files are provided to store and recall functions such as gain, detail, masking, gamma and other settings White balance memories are provided for each scene files for a total on nine memories by the remote control panel Menu access is provided for iris level (fine adjustment) and iris peak/average selection Computer controlled real-time auto-white balance ECC (Electric Color Compensating) Filter DK-Z50 CCD 2/3 lt-3ccd Total pixels 2010(H) x 1120(V) 2.3 million pixels 1.0 million pixels Effective pixels 1920(H) x 1080(V) Aspect ratio 16:9 (HD/SD), 4:3 (SD) switchable TV signal format 1080/59.94i, 1080/50i, 480/59.94i, 576/50i Horizontal resolution 1100 TV lines 800 TV lines Standard sensitivity 2000 Ix / F10 (1080/59.94i), 2000 Ix / F11 (1080/50i), 3200K, 89.9 reflectance Minimum illumination lx (F1.4, +72 db) +72 db at +36 db Gain and CCD charge accumulation S/N Typical 60 db (HD-SDI output decode Y channel Band: 27.5 MHz) Typical 58 db (HD-SDI output decode Y channel Band: 27.5 MHz) Bayonet mount Optical filter Clear, 1/4ND, 1/16ND, 1/64ND ECC filter 3200K, 4300K, 5600K, 6300K, 8000K Shutter PRESET 1/100, 1/250, 1/500, 1/1000, 1/2000 second (59.94i) 1/60, 1/250, 1/500, 1/1000, 1/2000 second (50i) Lock Scan 1/59.94 to 1/10000 second, 1.07 (+36 db) to 0.03 second (+6 db) (59.394i) 1/50.00 to 1/10000 second, 1.28 (+36 db) to 0.04 second (+6 db) (50i) Gain selection L (low): 3/0 db M(medium): 0 to +33 db, 3 db steps H(high): +3 to +36 db, 3 db steps Dimensions (W x H x D) 99 (W) x 105 (H) x 155 (D) mm (excluding protrusions) Power consumption approx. 17 W (DC 12 V) approx. 1.5 kg (3.3 lbs) Input signals(genlock) Tri-level sync / BB Output signals HD-SDI: SMPTE292M 0.8 Vp-p/1.5 Gbps SD-SDI: SMPTE259M-C 0.8 Vp-p/270 Mbps HV-HD33 HDTV HD-SDI/SD-SDI g New MOS sensors with improved sensitivity rise of 6 db. g Multi format HDTV SDTV output i/50i (16:9) p/50p (16:9) i (16:9) i (16:9) i (4:3) i (4:3) System Configuration (example) 1/3 3MOS i/50i (16:9), p/50p (16:9), i (16:9), i (16:9), i (4:3), i (4:3) 720 TV Line 65(W) 65(H) 125(D)mm g Digital serial output HD-SDI/SD-SDI 1 output g 6 color independent masking &Luminosity independent linear masking g Negative positive conversion & Right and left reversing HDTV i/50i (16:9), p/50p (16:9), Output format SDTV i (16:9), i (16:9) i (4:3), i (4:3) 1/3 3MOS Total pixels 1376(H) x 1070(V) Effective pixels 1280(H) x 720(V) Actual image area 4.80 mm (H) x 3.84 mm (V) system R. G. B. 3MOS Optical system 1/3 F2.2 prism C-mount (flange back mm in air) Horizontal resolution 720 TV Line (HD-SDI output, Center of Screen, DTL: OFF, Ych) Standard sensitivity F8.0 (2000 lx, 3200K) Minimum illumination 10 lx (F2.2, Gain: 15 db, Gamma: ON) S/N 53 db (HD-SDI output Decode, Ych, 30 MHz) Registration All screen 0.05% (Without lens Characteristic) Gain 0 db to +15 db 1 db step Preset 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000 Shutter Variable 1/60 to 1/11238 (59.94i/p mode, 1H (approx. 23 ms) step) 1/50 to 1/9375 (50i/p mode, 1H (approx. 28 ms) step) Gamma 0.45 (ON) / 1.0 (OFF) Scene file 4 Scene file Color bar ARIB bar Power supply voltage DC 12 V (10.5 V to 15 V) Power consumption approx. 8 W Dimensions 65 mm (W) x 65 mm (H) x 125 mm (D) 550 g (except lens) Operating 10 to 40ºC (+14 to +104 ºF) 20 to 60ºC (4 to +140 ºF) Standard composition DC in plug: R03-P3F Lens plug: E4-191J

15 HDTV Cameras HDTV Cameras KP-HD P KP-HD1005-S2 Power over coaxial P 64(W) 63(H) KP-HD1005-S4 DC type i/50i/29.97p/25p HDTV 1/3" 135(D) mm KP-HD1005-S5 800 TV Line i/50i/29.97p/25p HD-SDI 1 CMOS KP-HD1001 AC type P KP-HD20A 44(W) 44(H) Power over coaxial i/50i/29.97p/25p KP-HD20A-S2 59(D) mm DC type P/50P KP-HD1001, KP-HD1005, KP-HD1005-S2 KP-HD20A, KP-HD20A-S2 KP-HD1001 KP-HD1005 KP-HD1005-S4 KP-HD1005-S5 KP-HD1001, KP-HD1005, KP-HD1005-S2 KP-HD1005-S4, KP-HD1005-S5 KP-HD20A, KP-HD20A-S2 KP-HD1005 and KP-HD1005-S2 does not have AC code on the rear. KP-HD1005-S2 is different from the rear of the connector. KP-HD1005-S4, KP-HD1005-S5 KP-HD1005-S2 KP-HD20A, KP-HD20A-S2 g HD-SDI output An HD-SDI output provides a non compressed full bandwidth high quality video signal with a low latency of 17ms or less. g Coaxial cable transmission A standard 75 ohm coaxial cable of up to 100 meters is used for the HD-SDI output, allowing the use of existing coaxial cable. g Capable of transmitting up to 300 m by the Multiunit use (Except KP-HD1005-S4/-S5 It is capable of transmitting up to 300m by HD-VLC transmission mode of the Multiunit use. g Multi-format support (KP-HD1005-S4/-S5, KP-HD20A) i/50i/30p/25p g Wide dynamic range (KP-HD1001, HD1005/-S4/-S5) Display cleanly also large image of luminance difference. Total pixels Effective pixels Output Format Transmission distance S/N Horizontal resolution Minimum illumination KP-HD1001 KP-HD1005 g Adaptive noise reduction (KP-HD1001, HD1005/-S4/-S5) Bright HDTV color images can be obtained with just 0.3 lx up to 64-time integration enables night time photographing. In addition, adaptive noise reduction makes it easy to shoot moving objects. g Can be output in four systems of video formats by using the Multiunit (except for the MU-HD104-S1). g Power over coaxial using the Multiunit (except KP-HD1001) Possible because coaxial over power supply, wiring with a single coaxial cable is possible when using Multiunit. g High Sensitivity With a high sensitivity of 0.2 lx (0.4 lx for KP-HD20A-S2) Minimum Illumination, also enables monitoring of the installation environment that was difficult to look like a dark place of the production line. The black-and-white mode switching in KP-HD1005/-S4/-S5 and KP-HD1001, it is capable of highsensitivity photography of 0.02 lx in black-and-white movie. In addition, it is possible to increase sensitivity of up to 30 times by using accumulation function in KP-HD1005/-S4/-S5 and KP-HD1001. KP-HD1005-S4 KP-HD1005-S5 KP-HD1005-S2 KP-HD20A KP-HD20A-S2 1/3-inch CMOS 2010(H) x 1108(V) 2.2 M pixels 1944(H) x 1092(V) SMPTE 292M Compliance (HD-SDI Standard mode) HD-VLC: Require the Multiunit for transmission HD-VLC: Require the Multiunit for transmission Analog output: VBS Analog output: VBS HD-SDI output: p HD-SDI output: i/50i/29.97p/25p HD-SDI output: p i/50i/29.97p/25p KP-HD20A-S2: 1080p 59.94/50 VBS: NTSC, PAL VBS: NTSC, PAL VBS: NTSC,PAL HD-SDI Standard mode: Max. 100m (5C-FB 75 ) HD-SDI Standard mode: Max. 100m (5C-FB 75 ) HD-SDI Standard mode: HD-VLC mode: Max. 300m (5C-2V 75 /When using HD-VLC mode: Max. 300m (5C-2V 75 /When using the optional Multi-unit) Max. 100m (5C-FB 75 ) the optional Multi-unit) 50 db (AGC: OFF / Weight: ON) 800 TV lines Color: 0.2 lx 30 times accumulation: lx B & W: 0.02 lx 30 times accumulation: lx (F1.2, AGC 48 db, 3200K) OFF/Auto (Max. 48 db) / Manual (0 db to +48 db, 1 db step) Color: 0.2 lx (F1.2, AGC 48 db, 3200K) AGC Accumulation Mode Max. 30 times Color: 0.2 lx (F1.2, AGC 48 db, 3200K) (KP-HD20A-S2: 0.4 lx) OFF/Auto (AES) / Manual (1/30 to 1/14000 second) OFF/Auto (AES)/ Manual (1/30 to 1/14000 second (KP-HD20A- S2: 1/60 to second) Wide dynamic range OFF/ WDR WDR: Double shutter sampling Image quality adjustment Level / Gamma / Color level / Black level / Detail Backlight correction OFF/ ON (Photometry area can be set) Auto iris lens output DC/VIDEO White balance Auto: ATW / AWC / Manual (2500K to 10000K) Remote control RS-232C RS-232C C-/CS- C-: C-mount Adaptor use Power supply AC 100 V to 12 V DC ±10%, Power over coaxial from multi-unit Power Consumption Approx. 11 W (AC 100 V) Operating Temperature Approx. 7.5 W (Power over coaxial) Approx. 7.8 W (Power over coaxial) 10 to +50 ºC (+14 to +122 ºF), 30 to 80 % RH 20 to +60 ºC (4 to +140 ºF), 20 to 90 % RH Less than 29.6 m/s 2, 10 to 55 Hz XYZ axis for each 30 minutes) 64 x 63 x 135 mm (excluding lens and protrusions) 64 x 63 x 103 mm (excluding lens and protrusions) Approx. 4 W (Power over coaxial) 64 x 63 x 135 mm (excluding lens and protrusions) Approx. 5.9 W (KP-HD20A-S2: Approx. 4.7 W (Power over coaxial) 44 x 44 x 59 mm (excluding lens and protrusions) Approx. 750 g (excluding lens) Approx. 550 g (excluding lens) Approx. 400 g (excluding lens) Approx. 550 g (excluding lens) Approx. 200 g (excluding lens) Multiunit MU-HD101 1CH input HD-SDI input Output: HD-SDI, analog, DVI-D, VGA HD-VLC / HD-SDI transmission MU-HD104 4CH input MU-HD104-S1 HD-SDI input, HD-VLC transmission HD-SDI output MU-HD101 MU-HD104 MU-HD104-S1 MU-HD101 MU-HD104 / MU-HD104-S1 *Front panel display, switch / button / LED, and the rear connector is different in MU-HD104-S1. System Configuration (example) 160(W) 42(H) 170(D)mm 420(W) 44(H) 257(D)mm MU-HD101 MU-HD104 MU-HD104-S1 HD-SDI 1: BNC HD-SDI 4: BNC Video input HD-SDI (SMPTE292M) HD-VLC HD-VLC HD-SDI output 1: BNC (75 ) Through 1(MU-HD101), 4(MU-HD104): BNC(75 ) Analog output 1: BNC (75 ) DVI-D 1: DVI-D (SINGLE LINK) VGA 1: D-SUB 15pin Full HD: 1920x1080: 59.94i/50i/29.97p/25p SXGA: 1280x1024: 60p XGA: 1024x768: 60p NTSC: 720x486: 59.94i PAL: 768x576: 50i Power supply system Power over Coaxial Max. transmission distance (Using KP- HD1001) HD-SDI: 100 m (5C-FB), 60 m (3C-FB) HD-VLC: 300 m (5C-2V), 170 m (3C-2V) HD-SDI output 1: BNC (75 ) Through 4: BNC (75 ) Full HD: 1920x1080: 29.97p Remote control RS-232C AC100 V to 230 V ±10% Power supply 13 W (Power over coaxial on) 55 W (When connected to four KP-HD1005) 5 W (Power over coaxial off) Operating 10 to +45ºC (+14 to +113 ºF) 160(W) 42(H) 170(D) mm 420(W) 44(H) 257(D)mm Approx. 700 g Approx. 3.6 kg 27 28

16 Analog Interface Cameras KP-D20A NTSC/PAL 1/3" CCD NTSC: 480 TV line 44(W) 44(H) KP-D20B NTSC/PAL 1CCD Color 1/2 CCD PAL: 470 TV line 49(D)mm KP-D20B-S3 PAL 12pin type KP-D20A, KP-D20B KP-D20B-S3 g Compact multi purpose CCD color camera Featuring high sensitivity and high image quality in a package measuring just 44(W) x 44(H) x 49(D) mm. An on-screen menu system allows optimal adjustment of camera parameters to meet the imaging application. g KP-D20B-S3 : 12pin type, PAL type only System Configuration (example) Analog Interface Cameras KP-D5000 AC24V/DC12V 1CCD Color 64(W) 63(H) 135(D)mm KP-D5001 NTSC 1/2" CCD 560 TV line AC100V (High sensitivity) KP-D (W) 63(H) 64(D)mm DC12V KP-D5000 / KP-D5001 KP-D5010 KP-D5000 KP-D5001 KP-D5010 g High Sensitivity Ex view HAD CCD features 380,000 (440,000 for PAL) effective picture elements that deliver clear images even under low light condition. Color in full motion mode: 0.03 lx Color accumulation mode: lx Monochrome in full motion mode: lx Monochrome accumulation mode: lx g High Resolution Realize high horizontal resolution (Color mode: 560 TV lines, B/W mode: 580 TV lines) by adopting new digital process technology. g High Sensitivity and low S/N ratio New adaptive noise reduction can improve the S/N ratio without loosing motion resolution. g Adaptive Image Enhancer It is possible to observe it even if there is an luminance difference in the effect of Adaptive Image Enhancer of the black light control. g Adaptive Fog Reduction The removal effect of the fog is obtained by the Adaptive Fog Reduction function. g Dial type back focus adjustment An adjustable flange back mechanism is provided for optimum back focus of the lens Sensing area Scanning frequency KP-D20A 1/3-inch interline CCD (NTSC: ICX408AK, PAL: ICX409AK) Total pixels NTSC: 811 (H) x 508(V), PAL: 795 (H) x 596(V) Effective pixels NTSC: 768 (H) x 494(V), PAL: 752 (H) x 582(V) NTSC: 6.35 µm (H) x 7.4 µm (V), Pixel size PAL: 6.5 µm (H) x 6.25 µm (V) Color filter RGB primary color mosaic filter NTSC: 4.88 mm (H) x 3.66 mm (V), PAL: 4.89 mm (H) x 3.64 mm (V) NTSC; Horizontal: khz, Vertical: Hz PAL; Horizontal: khz, Vertical: 50 Hz C/CS-mount (C-mount adaptor optionally) VBS, Y/C NTSC: 480 TV Line, PAL: 470 TV Line KP-D20B 1/2-inch interline CCD (NTSC: ICX418AKL, PAL: ICX419AKL) NTSC: 8.4 µm (H) x 9.8 µm (V), PAL: 8.6 µm (H) x 8.3 µm (V) NTSC: 6.45 mm (H) x 4.84 mm (V), PAL: 6.47 mm (H) x 4.83 mm (V) Horizontal resolution Minimum illumination 0.8 lx (F1.2, Max. gain) 0.3 lx (F1.2, Max. gain) Signal noise to ratio 50 db or more OFF(NTSC:1/60,PAL:1/50),1/100(PAL:1/120),1/25 0,1/500, 1/1000,1/2000,1/4000,1/10000,1/20000,1/30000 second, AES White balance ATW / AWC / MANUAL Digital zoom Enlarged 4 times smoothly Backlight compensation Sensing areas selectable from 9 areas Power supply voltage 12 VDC ±10% Power consumption Approx. 220 ma Operation 10 to 50ºC (+14 to +122ºF), 30 to 80 % RH 20 to 60ºC (4 to +140ºF), 20 to 90 % RH Vibration endurance 10 to 55 Hz 1.96 to 59.3 m/s 2 44 (W) x 44 (H) x 49 (D) mm (Not including protrusions) KP-D20B-S6: 58 (W) x 44 (H) x 49 (D) mm Approx. 130 g KP-D20B-S6: 170 g KP-D5000 KP-D5001 KP-D5010 KP-D5000 KP-D5001 KP-D5010 Color system NTSC or PAL 1/2-inch interline CCD (NTSC: ICX428AKL, PAL: ICX429AKL) Total pixels NTSC: 811(H) x 508(V) PAL : 795(H) x 596(V) Effective pixels NTSC: 768(H) x 494(V) PAL : 752(H) x 582(V) Sensing area NTSC: 6.45(H) x 4.84(V) mm PAL : 6.47(H) x 4.83(V) mm Pixel size NTSC: 8.4 µm (H) x 9.8 µm (V) PAL: 8.6 µm (H) x 8.3 µm (V) 2:1 interlace NTSC Horizontal: khz, Vertical: Hz Scanning frequency PAL Horizontal: khz, Vertical: 50 Hz /external (HD/VD) VBS 1.0 Vp-p Video 0.7 Vp-p positive Video Sync 0.3 Vp-p negative output Burst 0.3 Vp-p, more than 8 cycles Impedance 75 unbalanced S/N More than 53 db (AGC: OFF(-6 db), enhancer and gamma off, DNR high) Horizontal: 560 TV lines (color), 580 TV Lines (B/W) Resolution Vertical: 350 TV Lines (Hige resolution mode) Sense illumination range to 100,000 lx (F1.2, auto-iris lens) Color: 0.03 lx (F1.2, 3200K, AGC muximum) Minimum illumination B/W: lx (F1.2, 3200K, AGC muximum, tungsten lamp) AGC On off selectable Off (manual: 0 to 51 db), On (max. gain: 6 to 51 db) (NTSC: 1/60, PAL: 1/50), 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/5000, 1/10000, 1/20000, 1/50,000, 1/100,000 second and auto Integration multiple setting Back light control Automatic or manual (fixed) Automatic: max. 128 times Manual : max. 512 times On/Off switchable Sensing areas: selectable 9 areas Adaptive imege enhancer: Off (mode off), On (automatic back light control) Auto-iris lens output Switchable video signal input type or iris control voltage input (galvanometer) type White balance Selectable auto-tracking (ATW), preset (AWC), manual (R/B gain adjustment) Text display One line of up to 24 alphanumeric charactors Digital zoom Up to 4 times (resolution loss with magnifications) B/W Mode OFF: color always mode ON: B/W always mode AUTO: mode selected in response to brightness (can be set for high, medium or low) Selectable On/Off/High/Low Nose reduction High: adaptive noise reduction (S/N ratio priority mode), Low: adaptive noise reduction (motion resolution priority mode) Adaptive fog reduction Scene file Power supply voltage Off: fog reduction mode off On: adjust foggy picture automatically Manual: adjust foggy picture manually It is possible to memorize five cameras setting (changeable by remote control) AC24V ±10%, 50/60Hz DC12V ±10% AC100 to 230 V ±10%, 50/60Hz DC12V ±10% Power consumption 4.0 W or less 2.3 W or less C-/CS-mount (with dial type back focus adjustment) Operating 10 to +50 ºC (+14 to +122 ºF) / 30 to 80% RH 20 to +60 ºC (4 to +140 ºF) / 20 to 90% RH Vibration endurance 10 to 55 Hz 1.96 to 59.3 m/s 2 Dimensions 64(W) x 63(H) x 135(D) mm (not including lens and protrusions) 64(W) x 63(H) x 64(D) mm (not including lens and protrusions) Approx. 600 g Approx. 270 g

17 Accessory List Accessory List Junction Box Camera Link (Mini) Interface W Type P Type S Type Model Name JU-M1A JU-F1 JU-Z2 Camera Link Po-Lite KP-F520W KP-FD510W KP-F500W KP-FR500W KP-F145W KP-FM500W KP-FM400W / FM200W KP-FMR400W / FMR200W KP-F32W KP-FD32W KP-FD500P / FD202P KP-FD140P KP-F230P / F31P KP-FR230P / FR31P KP-F200P / F80P / KP-F30P KP-FR200P / FR80P/FR30P KP-FB30P / FBR30P KP-FM200P / FM100P KP-FMD200P / FMD100P HV-F202S / F130S / F32S KP-FM1200 KP-FD500S / FD202S KP-FD140S KP-F230S / F31S KP-FR230S / FR31S KP-F200S / FR80S/F30S KP-FR200S / FR80S/FR30S KP-FBR30S KP-FMR830 KP-F200Lite / F80Lite / F30Lite KP-FM30Lite KP-FBM30Lite Junction Box Multiunit Interface USB3 Vision GigE Vision Analog HD Model Name JU-M1A JU-Z2 MU-HD101 MU-HD104 KP-FM500UB KP-FMD500UB KP-FM200UB / F32UB KP-FDM200UB / FD32UB KP-FM500GV KP-FMD500GV KP-FM200GV / F32GV KP-FMD200GV / FD32GV HV-F202GV / 130GV / F32GV KP-F500GV / F202GV / F145GV / F140GV KP-F83GV / F33GV KP-FD500GV / FD202GV / KP-FD140GV KP-FD83GV / FD33GV KP-D20A / D20B KP-D20B-S3 DK-H100 / Z50 HV-HD33 KP-HD1005 KP-HD1001 KP-HD20A TA-UBGV Remote Control Box RC-Z3 Tripod Adaptor Mini Camera Link Cable SDR-MDR (1m) (2m) (3m) (5m) (10m) (for High Frequency) (10m) Po Cable SDR-SDR Po Cable SDR-MDR (1m) (2m) (3m) (5m) (10m) (1m) (2m) (3m) (5m) TA-F500 TA-F230 TA-F202 TA-F200S TA-FM100P TA-FM200 TA-FM30Lite TA-FB30/FB30P C-101S C-201S C-301S C-501S C-102S C-102S (HF) C-101P (SS) C-201P (SS) C-301P (SS) C-501P (SS) C-102P (SS) C-101P (SM) C-201P (SM) C-301P (SM) C-501P (SM) Camera control panel C/CS-mount Adaptor Tripod Adaptor Camera Cable (2m) (5m) RU-1000VR RU-1500JY LA-D20AB TA-UBGV TA-FM200 TA-D20AB TA-F202 TA-M1 C-201KSM C-501KSM (10m) C-102KSM 15 pin Plug KEC-15P 12 Pin Plug HR10A-10P-12S 6 pin Plug HR10A-7P-6S(74) 4 pin Plug HR10A-7P-4P Lens Plug Lens extension cable DC Plug Dummy Glass IR Cut Filter E4-191J-100 ECE-R22 (0.22m) (FUJINON) R03-P3F ARC1214 IRC650 : Standard equipment (10m) C-102P (SM) Camera Cable (2m) (5m) (10m) C-201KSM C-501KSM C-102KSM 12 Pin Plug HR10A-10P-12S Dummy Glass ARC1214 ARC1616 IR Cut Filter IRC650 IRC1616 : Standard equipment (*1) : JU-F30 can be used only to input or output Trigger signal etc. Power cannot be supplied. (*2) : When using KP-FM500W/FMR400W/FM400W/FMR200W/FM200W/FM1200 in Full Configuration mode, please use the dedicated cable for Full Configuration

18 Accessories Junction Box Junction box is used for supplying power or synchronization signal to a camera. JU-M1A Tripod Adaptor Tripod adaptors allow the cameras to be mounted to a tripod. TA-F500 TA-FM30Lite Camera Cable C/CS Adaptor Dummy Glass C-201/501/102KSM TA-FM200 TA-M1 The camera cable is used for connecting camera and junction box. Supply 12VDC or external trigger signal to camera. Molded type C-201KSM 2m C-501KSM 5m C-102KSM 10m LA-D20AB TA-F230 TA-D20AB C- to CS-mount adapter. 5 mm adapter ring used when C-mount lenses are used on a CS-mount camera. TA-F200S TA-FB30 / FB30P TA-FB30 TA-FB30P ARC1214 ARC1616 TA-FM100P TA-FB30 TA-FB30P List of Frame Grabber Board Mini Camera Link Interface S (Non-Po) W (Auto Selection of Po or non-po) Output 3CCD Color RAW B/W Color RAW B/W Board Maker Model Interface HV-F202S HV-F130S HV-F32S KP-FD500S KP-FD202S KP-FD140S KP-FMR830 KP-FR230S KP-FR31S KP-FR200S KP-FR80S KP-FR30S KP-FBR30S KP-FM1200 KP-F230S KP-F31S KP-F200S KP-F80S KP-F30S KP-FD510W KP-FD32W KP-FR500W KP-FMR400W KP-FMR200W KP-F520W KP-F32W KP-F500W KP-F145W KP-FM500W KP-FM400W KP-FM200W Cognex (USA) MVS-8602e Po MVS-8600 PIXCI SV5 Analog PIXCI-1 PIXCI-2 PIXCI-EL1 PIXCI-EL1DB Epix (USA) PIXCI-EB1 PIXCI-EB1(Po) PIXCI-E4 PIXCI-E4DB PIXCI-ECB1 PIXCI-EC1 Euresys (BELGIUM) GrabLink mvgamma- (Base) mvtitan- (Base/Mid) mvtitan-rgb/g4 Analog (RGB) MATRIX VISION mvhyperion- (GERMANY) mvhyperion- m/f mvdelta Analog mvsigma Analog Helios-X Helios-e/X (64MZ) Solios X (6M/FC) (66/85MHz)Base, Mid Matrox (CANADA) Solios ev (85MHz) Base Solios ev (F) (85MHz) Base, Full METEOR Ⅱ -MC Analog METEOR Ⅱ -Digital LVDS METEOR Ⅱ - PCI/PXI-1428 National PCI-1426 Instruments PCIe-1427 (USA) PCIe-1430 PCIe-1429 APX-336 Analog APX-3310 (Base) AVALDATA (JAPAN) APX-3316 (Full) APX-3312A (Base) APX-3313A (Full) APX-3318 (Full) Non-current APX-3311 Po-Lite products (production APX-3302 (Base) discontinued) APX-3323 (Full) APX-3324A (Base) APX-3326A (Full) TIETECH GRAPHIN COMPANY(JAPAN) MICRO-TECHNICA (JAPAN) IPM-8580-M (Medium) IPM-8580-F (Full) IPM-8580-M(Po) (Medium) IPM-8531-BE (Base) IPM-8531-BE(Po) (Base) IPM-5542-F (Full) IPM-5542-M (Medium) IPM-5542-M(Po) (Medium) IPM-5512 (Base) IPM-5512-P(Po) (Base) IPM-5512-Lite Po-Lite MTPCI-TL2 (Base) MTPCI-PL-G (Base) MTPEX-QL-G Po-Lite GINGA digital-2 (Base/Mid) GINGA digital-e (Base/Mid) NVP-Ax230 Po/ 2CH * * * * NVP-Ax235 Po/ 4CH * * * * SVP-AX330 Po/ 1CH NVP-Ax130 Po/Po-Lite/(Base) MUCap-HD2e EDCap-eH Dummy glass is attached instead of IR-cut filter when acquiring near infrared range. : Board maker official support : Local confirmation at Hitachi Kokusai Electric or each board agency : During confirmation : Conditional verified Linx (JAPAN) Renesas Semiconductor Package & Test Solutions Co., Ltd. (JAPAN) EDEC LINSEY SYSTEM (JAPAN)

19 List of Frame Grabber Board Interface Mini Camera Link P (Po) Po-Lite Analog Output 3CCD Color RAW B/W B/W Color Board Maker Model Interface KP-FD500P KP-FMD200P KP-FMD100P KP-FD202P KP-FD140P KP-FR230P KP-FR31P KP-FR200P KP-FR80P KP-FR30P KP-FBR30P KP-FM200P KP-FM100P KP-F230P KP-F31P KP-F200P KP-F80P KP-F30P KP-F200Lite KP-F80Lite KP-F30Lite KP-FM30Lite KP-FBM30Lite Cognex (USA) MVS-8602e Po MVS-8600 PIXCI SV5 Analog PIXCI-1 PIXCI-2 PIXCI-EL1 PIXCI-EL1DB Epix (USA) PIXCI-EB1 PIXCI-EB1(Po) PIXCI-E4 PIXCI-E4DB PIXCI-ECB1 PIXCI-EC1 Euresys (BELGIUM) GrabLink mvgamma- (Base) mvtitan- (Base/Mid) mvtitan-rgb/g4 Analog (RGB) MATRIX VISION mvhyperion- (GERMANY) mvhyperion- m/f mvdelta Analog mvsigma Analog Helios-X Helios-e/X (64MZ) Solios X (6M/FC) (66/85MHz)Base, Mid Matrox (CANADA) Solios ev (85MHz) Base Solios ev (F) (85MHz) Base, Full METEOR Ⅱ -MC Analog METEOR Ⅱ -Digital LVDS METEOR Ⅱ - PCI/PXI-1428 National PCI-1426 Instruments PCIe-1427 (USA) PCIe-1430 PCIe-1429 APX-336 Analog APX-3310 (Base) AVALDATA (JAPAN) APX-3316 (Full) APX-3312A (Base) APX-3313A (Full) APX-3318 (Full) Non-current APX-3311 Po-Lite products (production APX-3302 (Base) discontinued) APX-3323 (Full) APX-3324A (Base) APX-3326A (Full) IPM-8580-M (Medium) IPM-8580-F (Full) IPM-8580-M(Po) (Medium) IPM-8531-BE (Base) TIETECH GRAPHIN COMPANY(JAPAN) MICRO-TECHNICA (JAPAN) Linx (JAPAN) Renesas Semiconductor Package & Test Solutions Co., Ltd. (JAPAN) EDEC LINSEY SYSTEM (JAPAN) IPM-8531-BE(Po) (Base) IPM-5542-F (Full) IPM-5542-M (Medium) IPM-5542-M(Po) (Medium) IPM-5512 (Base) IPM-5512-P(Po) (Base) IPM-5512-Lite Po-Lite MTPCI-TL2 (Base) MTPCI-PL-G (Base) MTPEX-QL-G Po-Lite GINGA digital-2 (Base/Mid) GINGA digital-e (Base/Mid) NVP-Ax230 Po/ 2CH * * * NVP-Ax235 Po/ 4CH * * * SVP-AX330 Po/ 1CH NVP-Ax130 Po/Po-Lite/(Base) MUCap-HD2e EDCap-eH KP-D20A/B List of Frame Grabber Board (Box type) Board Maker Model FAST (JAPAN) DECSYS (JAPAN) Yaskawa Electric Corporation (JAPAN) Mini Camera Link Interface S (Non-Po) W (Auto Selection of Po or non-po) Output 3CCD Color RAW B/W Color RAW B/W Interface HV-F202S HV-F130S HV-F32S KP-FD500S KP-FD202S KP-FD140S KP-FMR830 KP-FR230S KP-FR31S KP-FR200S KP-FR80S KP-FR30S KP-FBR30S KP-FM1200 KP-F230S KP-F31S KP-F200S KP-F80S KP-F30S KP-FD510W KP-FD32W KP-FR500W KP-FMR400W KP-FMR200W KP-F520W KP-F500W KP-F145W KP-F32W KP-FM500W KP-FM400W KP-FM200W FVC06 FVC07Be * * FVC07MF * * FHC3312 DS-3510 (Base) (1TAP) (Non-Po) DM-3010 (Base)(1TAP/2TAP) (Non-Po) (Base/Medium) DM-3011 (1TAP/2TAP/4TAP) (Non-Po) DS-4610 (Base)(1TAP/2TAP) (Non-Po) (Base/Medium) DM-3210 (1TAP/2TAP/4TAP) (Non-Po) MYVIS YV260 Board Maker Model FAST (JAPAN) DECSYS (JAPAN) Yaskawa Electric Corporation (JAPAN) Interface Mini Camera Link S (Non-Po) Po-LIte Analog Output Color RAW B/W B/W Color Interface KP-FD500P KP-FD202P KP-FD140P KP-FMD200P KP-FMD100P KPFR230P KP-FR31P KP-FR200P KP-FR80P KP-FR30P KP-FBR30P KP-FM200P KP-FM100P KP-F230P KP-F31P KP-F200P KP-F80P KP-F30P KP-F200Lite KP-F80Lite KP-F30Lite KP-FM30Lite KP-FBM30Lite FVC06 FVC07Be FVC07MF FHC3312 DS-3510 (Base) (1TAP) (Non-Po) DM-3010 (Base)(1TAP/2TAP) (Non-Po) (Base/Medium) DM-3011 (1TAP/2TAP/4TAP) (Non-Po) DS-4610 (Base)(1TAP/2TAP) (Non-Po) (Base/Medium) DM-3210 (1TAP/2TAP/4TAP) (Non-Po) MYVIS YV260 : Board maker official support : Local confirmation at Hitachi Kokusai Electric or each board agency : During confirmation : Conditional verified KP-D20A/B : Board maker official support : Local confirmation at Hitachi Kokusai Electric or each board agency : During confirmation : Conditional verified 35 36

20 List of Optional Lens List of Optional Lens µ TRON SPACECOM Supports 3CCD Zoom Supports megapixels Zoom Supports 5 megapixels Supports 2 megapixels Supports HDTV Supports Megapixels Zoom Day & Night Model PH16 8B PH33 30 HF****J HS****J Model TAV2812DCIR-MP VZ2465RI R-MP Image Format 1/2 type (HDTV) 1/2 type 2/3 or 1 type 2/3 type Image Format 1/3 type 1 type Focal Length 8 to 128mm 30 to 1000mm 12/16/25/35/50mm 8/12/16/25/35/50mm Dimensions 80 85mm mm ø47.5 to 57mm ø32.5 to 36mm HF series Focal Length mm 24-65mm Dimensions CS C TAV2812DCIR-MP VZ2465RI R-MP Mount C C C C Mount ø41.3mm 80 X 80mm Technical Information Myutron Inc. URL : TEL : FAX : Note HERCULES Available DC Auto Iris type MERCURY Technical Information SPACE inc. URL : USA SPACE COM inc (USA OFFICE) TEL : FAX : Head Office (Japan) TEL : FAX : FUJINON CBC Supports 3CCD Supports 5 megapixels Supports megapixels Model TF**DA-8 HF**SA-1 CF**HA-1 HF**HA-1B Image Format 1/3 type 2/3 type 1 type 2/3 type Focal Length 2.8/4/8/15/25mm 12.5/16/25/35/ 50/75mm 12.5/16/25/35/ 50/75mm 9/12.5/16/25/35 /50/75mm Dimensions ø29 to 34mm ø51mm ø51mm ø26.5 to 31.5mm Mount C C C C Technical Information USA URL : EUROPE URL : TEL : / FAX : / Mail : fujinon@fujinon.de TEL : +33 (0) 1/ FAX : +33 (0) 1/ Mail : fujinon@fujinon.fr HF35SA-1 TF2.8DA-8 Supports Megapixels Manual Iris Macro Zoom Model M0814-MP2 M1214-MP2 MLH-3XMP Image Format 2/3 type 2/3 type 2/3 type Focal Length 8mm 12mm 8.7 to 29.4mm Dimensions ø33.5mm ø33.5mm ø36.5mm Mount C C C Technical Information USA: CBC (AMERICA) Corp. URL : TEL : (1-631) FAX : (1-631) EUROPE: CBC (EUROPE) LTD. URL : TEL : (44-20) FAX : (44-20) SCHOTT MORITEX M0814-MP M1214-MP MLM-3XMP TAMRON Supports megapixels Supports HDTV Model M118FM** 23FM**SP M13VM288IR M13VM550 Image Format 1/1.8 type 2/3 type 1/3 type 1/3 type Focal Length 8/16/25/50mm 16/25/50mm 2.8-8mm Vari-focal 5-50mm Vari-focal Dimensions C C CS CS Mount ø29mm ø34mm ø43.2mm ø46mm Note DC Auto Iris type: M13VG** Technical Information USA: TAMRON USA, INC. URL : TEL : (858) 8400 EUROPE: TAMRON EUROPE GmbH. URL : TEL : 49 (221) Tokina Supports 5 megapixels Telecentric Long Operation 10X Macro lens Variable high-zoom lens Model KCM-****MP5 KCM-10D-64 KCM-50N Image Format 2/3 type 2/3 type 2/3 type Focal Length 9/12.5/18mm 10X 0.5X to 1.0X Dimensions ø48mm ø43mm ø36mm Mount C C C Technical Information Tokina Co.Ltd. URL : TEL : FM16SP 23FM25SP 23FM50SP KCM-0914MP5 KCM-10D-64 KCM-50N MIKAMI 1" type, Supports 5 megapixels Model ML-U0618MP9 ML-U0814MP9 Focal Length 6mm 8mm Fno Resolution Center: 150 lp/mm Periphery: 100 lp/mm distance of closest approach Image Format 16.8mm (1-inch support) Technical Information SCHOTT MORITEX Corporation URL : North America: SCHOTT North America., Inc. TEL : +1 (408) FAX : +1 (408) Outside North America (Japan) TEL : FAX : Supports 3CCD Manual Zoom Model PH6X8 MACRO J6X11MACRO Image Format 1/3 type 2/3 type Focal Length 8 to 48mm 11.5 to 69 mm Dimensions ø50.5x92.8mm ø49.3x98.2mm Mount C C 1" type, Supports 5 megapixels Model ML-U1214MP9 ML-U1614MP9 ML-U2514MP9 ML-U3514MP9 ML-U5016MP9 ML-U7518MP9 Focal Length 12.5mm 16mm 25mm 35mm 50mm 75mm Fno Resolution Center: 150 lp/mm Periphery: 125 lp/mm distance of closest approach Image Format 16.8mm (1-inch support) Technical Information MIKAMI & CO., LTD. URL : TEL : FAX :