Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.

Size: px

Start display at page:

Download "Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in."

Pierce Dickerson
5 years ago
Views:

Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43 mm R 0.

Adapts to any configuration and any width. Available in pre-galvanized steel. Mounting hardware sold separately. Refer to page C51 for an application example. 0.398 in. 10.

1 Wall Termination / Universal Blind End in mm in mm 1.00 in mm 0.75 in mm 9.50 in mm R in mm in mm in mm in mm R in mm Support and terminate runs of cable tray with this wall termination angle. Can be used as a wall support, floor to ceiling support or to safely terminate any tray run. Adapts to any configuration and any width. Available in pre-galvanized steel. Mounting hardware sold separately. Refer to page C51 for an application example in mm Tool required: 10mm nut driver ETA-WTA-PG Degree Bracket.787 in. 20 mm 9.07 in mm in mm Create high strength tee, cross and other 90 degree configurations with this 90 degree bracket. Available in hot-dipped galvanized steel either as a single bracket or a kit including one (1) bracket, four (4) bracket clamps and one (1) hot-dipped galvanized universal splice..118 in. / 3 mm Refer to page C42 for an application example in mm.255 in. 6,5 mm Tool required: 10mm nut driver Description ETA-H90-HD Single 90 Degree Bracket ETA-H90KIT-HD 90 Degree Bracket Kit* * Kit includes 1 90 bracket (ETA-H90-HD), 4 bracket clamps (ETH-WBC-HD) and 1 universal splice (ETH-SP-HD) 10 C23

Cable Drop-Out 0.125 in. X 1.125 in. / 3.2 mm X 28.6 mm 0.750 in. / 19.0 mm 0.750 in. / 19.0 mm 0.863 in. / 21.9 mm 4.125 in. 104.8 mm R 2.00 in. 50.8mm 1.00 in. 25.4 mm 0.250 in. / 6.3 mm 6.375 in.

The drop-out attaches to tray with built-in tabs. No hardware is required. Three different widths available in pre-galvanized steel. This drop-out is suitable for use with all tray widths and heights.

2 Cable Drop-Out in. X in. / 3.2 mm X 28.6 mm in. / 19.0 mm in. / 19.0 mm in. / 21.9 mm in mm R 2.00 in. 50.8mm 1.00 in mm in. / 6.3 mm in mm Illustration shows a 3.5 in. drop-out in mm 1.50 in mm W This 2 in. radius cable drop-out protects cables when exiting or entering tray by reducing the strain on the cables. The drop-out attaches to tray with built-in tabs. No hardware is required. Three different widths available in pre-galvanized steel. This drop-out is suitable for use with all tray widths and heights. Refer to page C43 for application examples. Width (W) in. mm ETA-CDOU17-PG ETA-CDOU35-PG ETA-CDOU52-PG Large Cable Drop-Out 0.82 in mm in mm 2.75 in mm 1.50 in mm 2.00 in mm R 0.6 in mm R in mm R 0.6 in mm in mm For larger cable tray widths and heavier cable loading, use the 7 in. radius large cable drop-out to protect cable exiting or entering tray runs. Available in pre-galvanized steel, the large cable drop-out has a versatile slotted design that enables the use of Ty-Rap cable ties or Ty-Grip fasteners to attach the cable bundles to the drop-out. Use built-in tabs to attach to siderails or universal clamp (see page C25) to attach to the end of cable runs. Refer to page C43 for an application example. ETA-CDOUL-PG C24

3 Side Hanger Clamp in. 30 mm M in. 58 mm in. 32 mm.781 in. 20 mm.437 in. 11 mm.354 in. 9 mm.590 in. 15 mm.433 in. / 11 mm The side hanger clamp is used to construct trapeze supports using threaded rods. The offset support hole allows for trouble-free access to support nuts for height adjustment and the rod can continue downward to allow for multi-level (tiered) trapeze installations. A set screw holds tray firmly in position once installation is complete. Available in pre-galvanized steel. For use with 3/8 in. threaded rod. Refer to page C47 for an application example. ETH-SH-PG ETH-SH-HD ETH-SH-S6 Stainless Steel (Type 316) Universal Clamp The universal clamp is used to secure large cable drop-outs to the end of a cable run as well as attaching bottom inserts to lengths of..433 in. / 11 mm Refer to pages C43 and C44 for application examples. Note: To hold down 2 in. x 2 in. wire basket tray, use 1 ETH-UNIVC-XX with bottom half of ETH-SP-XX. See page C in. 40 mm in. 60 mm ETH-UNIVC-PG ETH-UNIVC-HD ETH-UNIVC-SS Stainless Steel (Type 304) Wall Clamp This wall clamp attaches the flange of U- and C-profile, up to a maximum of 8 in. wide, to the wall surface. Available in pre-galvanized steel and stainless steel. Refer to page C50 for an application example in. / 11 mm X 0.63 in. / 16 mm 0.59 in. 15 mm in. 26 mm 2 in. 50 mm 2 in. 50 mm 0.2 in. 5 mm ETH-WC-PG ETH-WC-SS Stainless Steel (Type 304) C25

Threaded Rod Clamp 1.575 in. 40 mm 2.559 in. 65 mm.433 in.

4 Threaded Rod Clamp in. 40 mm in. 65 mm.433 in. / 11 mm This clamp is used for center-hung applications to secure tray sections to threaded rod for ceiling mounting and can be used with U-profile tray in 4 in., 8 in. and 12 in. widths. This clamp is not designed for use with C-profile tray. Available in pregalvanized steel, hot-dipped galvanized steel and stainless steel (Type 316). For use with 3/8 in. threaded rod. Refer to page C46 for application examples. ETH-CHC-PG ETH-CHC-HD ETH-CHC-S6 Stainless Steel (Type 316) Superstrut Threaded Rod 10 ft 300 cm Used for overhead mounting of with threaded rod clamp, side hanger clamps or strut. Available in 1/4 in. and 3/8 in. diameters, threaded rods are made of electro-galvanized steel. D Refer to pages C45, C46 and C47 for application examples. Order nut and washer separately. (See page C32). Thread per in. Size (D) H104-1/4X10EGC 20 1/4 in. dia. H104-3/8X10EGC 16 3/8 in. dia C26

.812 in. 21 mm Superstrut (Metal Framing Channel) 1.625 in. 41 mm.875 in. 22 mm Superstrut metal framing channel is sold in 10-foot lengths and the standard finish is pre-galvanized steel.

Other finishes and configurations are available, contact your Regional Sales Office for further information. B120010PG 12.80 5.80 Barrier Strip.472 in. 12 mm H 1.062 in. 27 mm.984 in. 25 mm.984 in. 25 mm.590 in.

5 .812 in. 21 mm Superstrut (Metal Framing Channel) in. 41 mm.875 in. 22 mm Superstrut metal framing channel is sold in 10-foot lengths and the standard finish is pre-galvanized steel. Strut is unpunched (not perforated) and must be field-cut and drilled for customized supports with maximum economy. Other finishes and configurations are available, contact your Regional Sales Office for further information. B120010PG Barrier Strip.472 in. 12 mm H in. 27 mm.984 in. 25 mm.984 in. 25 mm.590 in. 15 mm in mm.275 in. / 7 mm X.787 in. / 20 mm Used to separate bundles of power, communication and data cables. Barrier strips are sold in standard 10-foot lengths and are available in 1-3/4 in. and 3-3/8 in. heights. Available in pre-galvanized steel, hot-dipped galvanized and stainless steel (304 and 316). For use with barrier strip connector and barrier strip clamp on page C in. / 7 mm in. 100 mm Refer to page C54 for an application example. Height (H) in. mm ET-BS175-PG ET-BS175-HD ET-BS175-SS Stainless Steel (Type 304) ET-BS175-S6 Stainless Steel (Type 316) ET-BS338-PG ET-BS338-HD ET-BS338-SS Stainless Steel (Type 304) ET-BS338-S6 Stainless Steel (Type 316) C27

.937 in. 23.8 mm.266 in. 6.8 mm Barrier Strip Connector This connector is used to connect lengths of barrier strips and is available in two sizes for use with 1-3/4 in. and 3-3/8 in.

5 mm The barrier strip clamp is used to mount barrier strips to profiles. Available in electrogalvanized steel, hot-dipped galvanized steel and stainless steel (304 and 316).

6 .937 in mm.266 in. 6.8 mm Barrier Strip Connector This connector is used to connect lengths of barrier strips and is available in two sizes for use with 1-3/4 in. and 3-3/8 in. barrier strips. Supplied complete with mounting hardware. Refer to page C54 for an application example. 10 ET-BSH-UNIV-SS Pregalvanized Steel Barrier Strip Clamp.687 in mm The barrier strip clamp is used to mount barrier strips to profiles. Available in electrogalvanized steel, hot-dipped galvanized steel and stainless steel (304 and 316). Refer to page C54 for an application example in mm 25 ETH-BSC-EG Electrogalvanized Steel ETH-BSC-HD ETH-BSC-SS Stainless Steel (Type 304) ETH-BSC-S6 Stainless Steel (Type 316) C28

Cover and Bottom Insert Solid Bottom Insert L 0.625 in. 15.875 mm W +.125 in./ 4.

7 Cover and Bottom Insert Solid Bottom Insert L in mm W in./ 4.0 mm covers and bottom inserts protect cables from dust build-up and provide a physical barrier in environments where cables must be protected from machinery or vandalism. Attach bottoms to tray using universal clamps (see page C25) and secure covers using cover clips (see page C30). Description Solid Covers and Bottoms 120 in. (3 meters) Length (L) Width (W) in. mm Covers Bottoms 2 50 ETA-COVS02PG ETA-BIS02PG ETA-COVS04PG ETA-BIS04PG ETA-COVS06PG ETA-BIS06PG ETA-COVS08PG ETA-BIS08PG ETA-COVS12PG ETA-BIS12PG ETA-COVS16PG ETA-BIS16PG ETA-COVS18PG ETA-BIS18PG ETA-COVS20PG ETA-BIS20PG ETA-COVS24PG ETA-BIS24PG Available in pre-galvanized steel in widths from 2 in. to 24 in. Available in lengths of 120 in. or 40 in. Available in solid or slotted design. Refer to page C44 for an application example. Solid Covers and Bottoms 40 in. (1 meter) Length (L) 2 50 ETA-COVS02PG ETA-BIS02PG ETA-COVS04PG ETA-BIS04PG ETA-COVS06PG ETA-BIS06PG ETA-COVS08PG ETA-BIS08PG ETA-COVS12PG ETA-BIS12PG ETA-COVS16PG ETA-BIS16PG ETA-COVS18PG ETA-BIS18PG ETA-COVS20PG ETA-BIS20PG ETA-COVS24PG ETA-BIS24PG Vented Covers and Bottoms 120 in. (3 meters) Length (L) 2 50 ETA-COVV02PG ETA-BIV02PG ETA-COVV04PG ETA-BIV04PG ETA-COVV06PG ETA-BIV06PG ETA-COVV08PG ETA-BIV08PG ETA-COVV12PG ETA-BIV12PG ETA-COVV16PG ETA-BIV16PG ETA-COVV18PG ETA-BIV18PG ETA-COVV20PG ETA-BIV20PG ETA-COVV24PG ETA-BIV24PG Vented Covers and Bottoms 40 in. (1 meter) Length (L) 2 50 ETA-COVV02PG ETA-BIV02PG ETA-COVV04PG ETA-BIV04PG ETA-COVV06PG ETA-BIV06PG ETA-COVV08PG ETA-BIV08PG ETA-COVV12PG ETA-BIV12PG ETA-COVV16PG ETA-BIV16PG ETA-COVV18PG ETA-BIV18PG ETA-COVV20PG ETA-BIV20PG ETA-COVV24PG ETA-BIV24PG C29

Cover Clip 45 1.3 in. 33 mm 0.57 in. 14.5 mm 0.157 in. 4 mm 1.85 in. 47 mm Secure covers to tray quickly with this cover clip.

Refer to page C44 for an application example. 0.787 in. 20 mm 0.394 in. 10 mm 1.39 in. 35.3 mm ETA-CC-S6 Stainless Steel (Type 316) 0.10 0.

8 Cover Clip in. 33 mm 0.57 in mm in. 4 mm 1.85 in. 47 mm Secure covers to tray quickly with this cover clip. Available in stainless steel (type 316), the cover clip uses built-in tabs to secure the cover and to facilitate removal of the cover when required. No tools required. Refer to page C44 for an application example in. 20 mm in. 10 mm 1.39 in mm ETA-CC-S6 Stainless Steel (Type 316) Blackburn Grounding Connector 20 Note: To ensure electrical continuity, the Blackburn GPT-2 grounding connnector and ground wire MUST be used in all QuikLok TM Series tray applications..63 in mm.88 in mm Conductor Range GPT-2 #12-#2 AWG ETG Lay-In Ground Lug E T G L L Ground 2 in. through 4 in. depth Lay in Lug #2 AWG through #14 AWG Lay in lug design easily installs onto any 2 in. through 4 in. deep without any disassembly required. Approved for steel and stainless steel wire mesh trays. Accepts 12 AWG solid through 2 AWG stranded aluminum and 14 AWG solid/stranded through 2 AWG stranded copper conductors. Slotted hook design sits securely onto the mesh intersections to restrict swiveling. Must be used on each length of QuikLok TM Series tray applications to meet CSA requirements. C30

Superstrut Bat Clip Attaches to Strut Specifications One piece construction No installation tools required Reduces installation time to the minimum For horizontal applications NEW! Conductor Range lb.

9 Superstrut Bat Clip Attaches to Strut Specifications One piece construction No installation tools required Reduces installation time to the minimum For horizontal applications NEW! Conductor Range lb./100 kg/100. SSF-CK535 Spring Steel with zinc phosphate finish (black) Note: BAT Clip shoud be used for horizontal tray/strut applications. For vertical tray/strut applications, the universal clamp (page C25) should be used to clamp to strut using a bolt and spring nut (page C32). Position BAT Clip on outer wires of tray and opposing sides of the strut flanges To install, just hook one wing under the strut flange and push down the other wing with your thumb to slip it under the strut flange. Beam Clamp.25 in. 6.4 mm in. 55 mm M8 X 25 Hexagon Head Bolt H This clamp is used primarily to attach L-profile to steel beams. It can also be used to attach U- and C-profiles onto structural steel. Available in 3/4 in. and 1-1/8 in. sizes in hot-dipped galvanized steel. Refer to page C54 for an application example in. 30 mm Height (H) in. mm ETH-IBC3/4-HD ETH-IBC1-HD C31

Superstrut Hexagonal Nut For use with Superstrut threaded rod. Available in two sizes, 1/4 in. and 3/8 in., in electro-galvanized steel. E145-1/4EGC E145-3/8EGC Size 1/4 in. hex nut 3/8 in. hex nut 0.

10 Superstrut Hexagonal Nut For use with Superstrut threaded rod. Available in two sizes, 1/4 in. and 3/8 in., in electro-galvanized steel. E145-1/4EGC E145-3/8EGC Size 1/4 in. hex nut 3/8 in. hex nut Superstrut Flat Washer For use with Superstrut threaded rod and hex nut. Available in 1/4 in. and 3/8 in. sizes, in electrogalvanized steel. Size E147-1/4EGC 1/4 in. flat washer E147-3/8EGC 3/8 in. flat washer Superstrut Spring Nut For use with B-Series metal framing channel, spring nuts are offered in 1/4 in. and 3/8 in. sizes in electrogalvanized steel. Size B100-1/4EGC 1/4 in. spring nut B100-3/8EGC 3/8 in. spring nut C32

Bracket Clamp.866 in. 22 mm 1.338 in. 34 mm The bracket clamp is used for mounting tray to wall brackets or suspended support brackets and is compatible with all tray profiles.

Tool required: 10mm nut driver Standard Bolting Kit ETH-WBC-EG Electro-galvanized Steel ETH-WBC-HD 0.04 0.

11 Bracket Clamp.866 in. 22 mm in. 34 mm The bracket clamp is used for mounting tray to wall brackets or suspended support brackets and is compatible with all tray profiles. Available in electro-galvanized steel, pre-galvanized steel, hot-dipped galvanized steel and stainless steel (304 or 316). Refer to pages C48, C49, C50 and C51 for application examples. Tool required: 10mm nut driver Standard Bolting Kit ETH-WBC-EG Electro-galvanized Steel ETH-WBC-HD ETH-WBC-SS Stainless Steel (Type 304) 25 ETH-WBC-S6 Stainless Steel (Type 316) The standard bolting kit consists of an M6 x 20mm carriage bolt and capture nut. Available in electro-galvanized steel, hot-dipped galvanized steel and stainless steel (304 and 316). Tool required: 10mm nut driver ETH-KIT0-EG Electro-galvanized Steel ETH-KIT0-HD ETH-KIT0-SS Stainless Steel (Type 304) ETH-KIT0-S6 Stainless Steel (Type 316) C33

12 Nested J or L Bracket Bolting Kit For use with J and L brackets, this bracket bolting kit consists of an M10 x 25mm carriage bolt and capture nut. Available in hot-dipped galvanized steel. Refer to page C49 for an application example. Tool required: 17mm nut driver 50 ETH-KIT1-HD Back-to-Back Bracket Bolting Kit For use in back-to-back bracket configurations or for use with L brackets, this bracket bolting kit consists of an hexagonal M10 x 60mm bolt, a flat washer, a lock washer and a nut. Available in hot-dipped galvanized steel. Refer to page C49 for an application example. Tool required: 17mm nut driver 10 ETH-KIT2-HD Spacers The spacer is used to prevent spreading of the bracket profile during installation. Spacers can be used with both L and J brackets in both single and back-to-back configurations. Available in pre-galvanized and hot-dipped galvanized steel. Refer to pages C48 and C49 for application examples. 20 ETH-S-PG ETH-S-HD C34

Reduces installation time Locks tray into position - no hardware required

Reduces installation time Locks tray into position - no hardware required Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and