User Manual Lets get Started

Transcription

1 Rayne Action Raynecam_official User Manual Lets get Started

2 Included Accessories Before You Start We know you super excited to show the world your awesome videos and photos, but please take a minute to check out some general precautions and information below. Camera 30m Waterproof Case RF Remote Control 2 x Batteries Dual Battery Charger Watch the Temp! Cameras are sensitive to extreme temperatures, both hot and cold. Be sure to keep an eye on your gear and stop use immediately if any deformity on camera or waterproof casing becomes visible. Quick Release Buckle Handle Bar Mount Flat Surface Mount Curved Surface Mount Beware the Elements Your waterproof housing enables you to use your camera up to 30m underwater, if your camera is exposed to water without the housing attached you re going to have a very wet, dead, useless camera on your hands, so always keep it protected! Don t be a Hero Switch Connectors Screw Screw Tightener J Hook Don t take it apart Dismantling your camera will void your warranty, for any service related issues please contact your local dealer. Play Nicely Yes our cameras are built to last, but excessive rough force may affect the camera Tripod Mount Adaptor USB cable Quick Start Guide Manual and damage internal components. Always use the waterproof housing to ensure your camera is protected! 2 *View over 80 mounts and accessories at 3

3 WELCOME TO RAYNE 6 Camera Features 7 Included Mounts and Accessories 8 Additional Mounts and Accessories 12 Menu Flow Chart 13 Software Updates 14 Camera Modes and Settings 15 Camera Settings 16 Settings Information 18 Video Settings 20 Photo Settings 22 Capturing Photos and Videos 23 Default Camera Settings 24 Wifi and RF Remote 25 SD Card Information 26 Transferring Files 27 Dash Cam Mode 27 Using Mounts and Accessories 4 3

4 Designed for Adventure Included Mounts and Accessories The world is changing. Everyday, what was though previously impossible is now just the beginning of a new chapter of pushing our bodies and minds to the limit.. Our goal at Rayne Cams is to help you show the world your passion, one beautiful frame at a time. 30m Waterproof housing USB cable RF Waterproof remote control Dual battery charger 2 x Batteries Camera Features Mic 1.5 LCD Indicator Light Shutter / OK Button SC Card Slot Flat surface mount Curved surface mount Switch support Handle bar mount Power / Menu Button HDMI Port Mode / Wi-Fi Button Screws Tripod mount adaptor J Hook Quick release buckle Degree wide angle lens USB Port Screw tightener EVA box Quick Start Guide User Manual 7

5 Additional Mounts and Accessories RYN02-1 RYN02 RYN03 RYN04 RYN05 RYN16 RYN17 RYN18 RYN19 RYN20 Bodyboard Mount Surf Mount Flex Clamp Mount Mount for Helmet, Motorbike Roll Bar 360 degrees rotation, Mount with lock, with 3M sticker & screws 2X Flat mount 3M VHB Adhesive Sticky Helmet Curved Surface & Mount (3M Sticker) Curved Adhesive Side Mount Helmet Front Mount. A Helmet Front Mount. B RYN06 RYN07 RYN08 RYN09 RYN10 RYN65 RYN60 RYN61 RYN62 RYN63 Bicycle Handlebar / Bike Mount with Seatpost Clamp with tripod adaptor Three-way Adjustable Pivot Arm Three-way Adjustable Pivot Arm Black Tripod Mount Adapter Mount for Helmet, 360 degrees rotation, with lock, with 3M sticker 360 Degree Quick Buckle Bike Aluminium Handlebar Mount diameter Model B Bike Aluminum Mount Diameter Yuntai Bicyle Clip Mount, 360 degrees, with tripod adaptor Belt Type Fixed Bracket with tripod adaptor RYN11 RYN12 RYN13 RYN14 RYN15 8 Mount for chest harness Vertical Surface J-Hook Buckle. 2x pieces 1x Screw and cap, long or short one for choice Flat Mount for Tripod 2X Curved Surface 3M VHB Adhesive Sticky Mount 9

6 Additional Mounts and Accessories RYN46 RYN47 RYN48 RYN49 RYN50A RYN54 RYN55 RYN56 RYN57 RYN58 Floaty sponge with 3M sticker Replacement water housing Replacement backdoor Bag for accessories Small EVA Collecting Box USB Wall plug charger USB Car charger Backup portable charger USB cable 2x Black Buckle Basic Mount RYN50B RYN50C RYN51 RYN52 RYN53 RYN64 RYN67 Medium EVA Collecting Box Large EVA Collecting Box Anti-fog interts, 12pcs included, Reusable RAYNE Battery RAYNE Charger Dive Hand Strap Curved Hand Stabiliser 10 11

7 Menu Flow Chart VIDEO SETTINGS PHOTO SETTINGS CAMERA SETTINGS Firmware Updates We are constantly improving features on our cameras. To make sure you have the latest firmware update, go to Video Resolution Loop Record Record Audio Image Size Date Stamp Date & Time Language Time Lapse Self Timer White Time lapse EV Image Rotation Frequency GETTING STARTED BASICS Date Stamp EV WDR Motion Detection FOV Custom White G-Sensor Colour Custom White White TV Mode Beep Restore Default Screen Auto Sleep Format Version STEP 1 Remove camera from waterproof housing STEP 3 Remove camera battery slider and insert battery OSD RF Pairing Default Setting 1 Touch Record STEP 2 Insert micro SD card STEP 4 Charge battery using provided USB cable 12 13

8 Camera Modes and Settings Turn camera ON and repeatedly press the MODE Button to scroll through camera modes. Camera Settings 1. To adjust camera settings, short press Power / Menu Button 2. Press Menu Button to scroll through settings and select System Settings by pressing Shutter / OK Button 3. Press Power / Menu Button to scroll through available settings. 4. To choose a setting, press Shutter / OK Button 5. Modify specific setting with pressing Shutter / OK Button 6. To go back at any time in a setting, press Wifi Button 7. Exit Setting by pressing Wifi Button VIDEO PHOTO VIEW Record video Capture photo Playback footage Quick Tip: Visit to get a full tutorial on how to setup and use your Rayne cam. VIDEO 15PHOTO SETTINGS Record video Capture photo Change settings 14 15

9 Settings Information Date / Time Setting 1.Adjust date and time for your camera. Press Menu to select time setting icon. 2.Press Capture /Shoot button to select time setting and adjust. 3.Press Wifi button to exit to previous menu. Language Change default menu language. Invert Image Invert image 180 degrees Auto Screen Off Adjust LCD screen to stay on, or automatically power off after one or five minutes. Useful for saving battery life. Auto Power Off Adjust camera auto power off options between off / 1 / 3 and 5 minutes. Light Frequency Set light frequency either 50hz or 60 hz. Check your country frequency by visiting Dash Cam Mode Activate Dash cam mode and use your Rayne Gold as a vehicle recording devise. Choosing this setting will activate 2 minute cycle recording, auto on / off when connected to 12v charger and G-Sensor to protect files in case of an accident. Format Card Erase all information permanently from your memory card. Default Restores factory default settings. Version Displays current firmware version. Check for updates on File Playback Playback all video and photo files Delete Files Scroll through and permanently delete video and photo files. Lock / Unlock Files Locked files cannot be deleted. Press Capture / Shoot button to Lock / Unlock files. TV Out Select to display recordings via USB or mini HDMI to any monitor

10 Video Settings When video mode is active, you can press wifi button settings menu. to bring up video Resolution Choose your video quality. The higher the resolution the higher the quality. We recommend shooting on 1080p for best results. You can expect 4 hours of recording on a 32gb SD card. Cycle / Loop Video Loop recording allows you to record timed blocks of video (either 2 / 5 minutes long), which are saved as individual files on your SD card. Once you have used up all your memory on your SD card, the camera will overwrite the first looped block and so forth. This is useful when using the cameras as a dash cam, so that you do not need to replace your SD card every time it fills up. The built in G-Sensor will automatically lock the last recorded file to protect it against any damage. Audio Setting Allows you to set audio recording on or off. Date Setting Toggle date stamp on videos on or off. Default setting is off. Time Lapse Capture breathtaking video time lapses. When activated, your camera will record one frame every 1 / 5 or 10 seconds and seamlessly stitch your video together. Timing Mode Similar to Time Lapse mode, but with larger intervals. Capture a photo every 10 / 20 / 30 or 60 seconds. White Choose between Auto (AWB), cloudy, sunny, tungsten, fluorescent, blue, light blue, red and custom. Exposure Adjust exposure to make videos lighter or darker. Action Mode Select action mode to activate one-press recording. Once activated, your camera will automatically start recording once Power / menu button is pressed. G-Sensor Used mainly in Dash Cam mode, the built in G-Sensor will automatically lock the current recording if any sudden change in gravity is experienced

11 Photo Settings When photomode is active, you can press wifi button menu. to bring up photo settings White Choose between Auto (AWB), cloudy, sunny, tungsten, fluorescent, blue, light blue, red and custom. Resolution Select your resolution. The higher the pixel count, the better quality your images will be. Choose between 3 / 5 / 8 / 12 and 16mp. Exposure Adjust exposure to make videos lighter or darker. Date Label Switch to On to display data such as date and time on each picture. Time Lapse When activated, your camera will automatically take a photo based on the set time interval. Useful for time lapse photography. Available settings are off / 2s / 5s and 10 seconds. Burst Mode When activated, your camera will take 5 photos in one second. Colour Effect Choose between normal, black and white and sepia

12 Capturing Photos and Videos Video Resolution Press the Shutter / OK Button to take a photo or start recording. Press the Shutter / OK Button to take a photo or stop recording. View your photo / video by pressing Wifi Button VIDEO SETTINGS PHOTO SETTINGS CAMERA SETTINGS Loop Record Record Audio Image Size Date Stamp Date & Time Language Default Camera Settings Your Rayne camera contains following default photo and video settings. To modify settings, access the settings menu by pressing Menu Button while in Video or Photo Mode Default Photo Default Video Time Stamp Photo Mode Loop recording Wifi 16mp 1080p 30fps Off Single Photo OFF OFF Time Lapse Self Timer White Time lapse EV Image Rotation Frequency Date Stamp Custom White Colour White TV Mode Screen Auto Sleep EV Motion Detection G-Sensor Custom White Beep Format WDR FOV Restore Default OSD Version RF Pairing Quick Tip: You can reach out to us anytime for help and support by ing info@raynecam.com Default Setting 1 Touch Record 22 23

13 Pairing RF Remote Pairing Remote to Camera Turn on camera by holding in Power / Menu button for 3 5 seconds Press Power / Menu button to go to System Settings and press Shutter / OK button Scroll to RF Pairing setting by pressing Power / Menu button and press Shutter / OK button On the remote, long press the record and picture buttons at the same time until remote page on screen goes back to the manual page SD Card Information Your camera is compatible with any micro SD card up to 32gb. We suggest class 10 to ensure highest quality video recording. You can expect around 4 hours of HD footage on a 32gb card. App Connection Set Up Scan QR codes below or visit to download app. Click Install App on phone Turn camera on and long press Mode button to activate wifi signal On your phone, go to Settings / Wifi and select network Rayne Gold Enter password that appears on your camera screen Open app Final Cam IOS Android 24 25

14 Transferring Files We ve included a few different options for you to play back your files. Via LCD screen Press Wifi Button until Playback mode is shown. Final Cam App Playback and share Photos direct from your phone or tablet. HDMI TV Video Out Connect your camera to a TV via Mini HDMI Cable (not included) to view playback on your TV. Dash Cam Mode Your camera can also be used as an HD dash camera. You will need to purchase some additional accessories including 12v car charger and suction cup. Activate dash cam mode by going to Video settings and select Dash Cam mode. This will activate loop recording, auto record on / off and G-Sensor settings. Using Mounts and Accessories Scan the code below to see a video tutorial of all accessories, or go to Computer Connect your camera to any computer via included USB cable 26 27