d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
|
|
|
- Frank Watts
- 5 years ago
- Views:
Transcription
1 HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain behind and proposes today a range of calipers with digital read-out of a measurement capacity going from 150 to Other handtools complete this range. Sylvac inductive measuring system (patented) Data output Power supply: Lithium battery 3V, Type CR 2032 Operational temperature: +5 to +40 C /inch selection 7
2 Professionnal Caliper DESCRIPTION S_Cal PRO d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system Digital display LCD, Height of digits 7 S_Connect Proximity Thickness of frame 3.5 Simple and intuitive functions
3 Professionnal Caliper DIMENSIONAL DRAWING S_Cal PRO warranty TECHNICAL SPECIFICATIONS Measuring range Max. Error G µm A B C D E 16 x x x x 4 Depth rod 4 x 1.4 Ø x Protection rating according to IEC IP67 with or without connector S_Connect : Proximity USB / RS232 / Digimatic / Wireless 2) Zero setting Smart Inductive Sensor > 100 : 30 µm / DIN 862 2) see cables chapter 9
4 Workshop caliper S_Cal WORK DESCRIPTION S_Connect Opto Liquid resistant frame Digital display LCD, Height of digits
5 Workshop caliper S_Cal WORK DIMENSIONAL DRAWING TECHNICAL SPECIFICATIONS Measuring range Max. Error G µm A B C D E 16 x 3 16 x 3 16 x 3 16 x 4 Depth rod 4 x 1.4 Ø x Protection rating according to IEC IP54 with or without connector S_Connect : Opto USB / RS232 / Digimatic / Wireless 2) Zero setting REL and ABS functions > 100 : 30 µm / DIN 862 2) see cables chapter 11
6 Workshop caliper S_Cal ONE DESCRIPTION Liquid resistant frame Digital display LCD, Height of digits
7 Workshop caliper S_Cal ONE DIMENSIONAL DRAWING A Ø1.5 B E E D 4x C TECHNICAL SPECIFICATIONS Measuring range Max. Error G µm A B C D E 16 x 3 16 x 3 Depth rod 4 x 1.4 Ø1.5 Thumb wheel device optional Zero setting > 100 : 30 µm / DIN
8 The micron caliper DESCRIPTION S_Cal Micron Rotating clamp Digital display LCD, Height of digits 6.7 Aluminium frame reinforced by stainless steel rods System ensuring a constant measuring force Tungsten carbide anvils 6.5 x 12 Other anvils on request
9 The micron caliper DIMENSIONAL DRAWING S_Cal Micron TECHNICAL SPECIFICATIONS Measuring range Max. Error µm Repeatability µm Measuring force Beam Measuring surface S_Connect : Proximity Tungsten carbide anvils PRESET function Smart Inductive Sensor Stand Lifter ± 2) see cables chapter N N 5 x x 12 USB / RS232 / Digimatic / Wireless 2) 15
10 S_Cal + S_Cal Micron BASIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate (S_Cal Micron) APPLICATIONS Depth measurement S_Cal with kit Depth measurement of small internal Ø S_Cal Micron Comparison measurement ACCESSORIES S_Cal PRO S_Cal WORK S_Cal ONE Accessory kit for S_Cal 16
11 S_Cal + S_Cal Micron ACCESSORIES S_Cal PRO S_Cal WORK S_Cal ONE S_Cal Micron Base for Depth Measurement Thumb wheel Thumb wheel Thumb wheel Stand Lifting device with photo-cable Pneumatic lifting device Pneumatic lifting device with footpedal Foot-pedal only 17
12 Ultra light caliper DESCRIPTION S_Cal UL Tungsten carbide internal pins Ø 5 Movable jaw from ULIII 1000 Digital display LCD, Height of digits 8.5 Hollowed section aluminium beam reinforced by two stainless steel rods. Measuring scale resistant to liquid Constant pressure device for internal and external measurements 3m = 3kg Stainless steel external jaws, thikness 7, titanium coated
13 Ultra light caliper DIMENSIONAL DRAWING S_Cal UL TECHNICAL SPECIFICATIONS Measuring range Max.Error µm Repeatability µm A B fix C mobile Weight kg S_Connect : Opto USB / RS232 / Digimatic / Wireless 2) Setting by PC Memory set 2 references RESET function Min/Max function Tolerance limit indicators on request 2) see cable chapter 19
14 Ultra light caliper SPECIAL EXECUTIONS SPECIAL JAWS TYPE A S_Cal UL L K M L A 7 B TECHNICAL SPECIFICATIONS Special jaws (pair) Lenght L to specify with order (max 400 ) L M L - 25 UL 300 UL 600 UL 1000 UL 1500 UL 2000 UL 2500 UL 3000 UL specification Max. error. [μm] / Repeatability [μm] With Jaws / / / / / / / 40 With Jaws / / / / / / / 50 With Jaws / / / / / / 80 - A B K
15 Ultra light caliper S_Cal UL SPECIAL EXECUTIONS SPECIAL JAWS TYPE C L K x10 M 32 7 N L A A 15.5 A B Ø8 COUPE A-A TECHNICAL SPECIFICATIONS Special jaws (pair) Lenght L to specify with order (max 300 ) L max 300 M L - 25 N 80 // µm 150 = 60 / 200 = 80 / 300 = 100 UL 300 UL 600 UL 1000 UL 1500 UL 2000 UL 2500 UL 3000 UL specification Max. error. [μm] / Repeatability [μm] With Jaws / / / / / / / 30 With Jaws / / / / / / / 40 With Jaws / / / / / / / 50 A B K
16 S_Cal UL BASIC INSTRUMENT Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for ULIII up to 1500 APPLICATIONS Special S_Cal UL with modified measuring jaws. Special S_Cal UL with extended measuring jaws. S_Cal UL, movable left jaw 22
17 S_Cal UL ACCESSORIES UL Ø D Ø6.5 Thread anvils holders for thread measurement., (pair) Ø3.5 Support Ø 6.35 for thread measurement wires in holders, (pair) Dito Ø 6.5, (pair) Dito Ø 8, (pair) 14 M2.5 Support with int. thread M 2.5 for measuring anvils, (pair) Inserts in hardened steel, cone 60 for bore clearance measurement > 10, (pair) Holder for dial gauge contact points for internal groove measurement, (pair) Dito height 58, (pair) See also cables chapter 23
18 Professional micrometer DESCRIPTION S_Mike PRO absolute system IEC 60529, even connected covered with 3 instruments only Measuring surface in hard metal Non-rotating spindle Ø 6.5 Fast handle movement with ratchet Simple and friendly functions S_connect proximity Hardened steel anvils type Ø 2 Hardened steel knife shaped anvils
19 Professional micrometer DIMENSIONAL DRAWING S_Mike PRO 903.XX XX02 TECHNICAL SPECIFICATIONS Measuring range Max. Error G µm Repeatability 2) µm Anvils types Ø6.5 Ø2 0.75x6.5 Ø6.5 Ø2 0.75x6.5 Ø6.5 Ø2 0.75x6.5 A B C D E F S_Connect : Proximity USB / RS 232 / Digimatic / Wireless 3) Prot. rating accor. to IEC IP67 even connected Setting by PC Adjustable measuring force 5N / 10N Force 10N (5N on demand) Non-rotating spindle Fast movement Preset function Smart Inductive Sensor according to DIN 863 2) ± 1 digit 3) see cables chapter 25
20 Professional micrometer BASIC INSTRUMENT S_Mike PRO including: , et Measuring rang / 0-30 Plastic case Aluminium case Instrument according to technical specifications Pin gauge 50 (for X) Pin gauge 75 (for X) Lithium battery CR2032 included Instruction manual Calibration certificate / 0600 / 1000 Pin gauge 50 Pin gauge 75 Lithium battery CR2032 included Instruction manual Calibration certificate ACCESSORIES Stand Pin gauge Pin gauge 75 26
21 Depth gauge DESCRIPTION S_Depth PRO cylindrical or spherical anvils Digital rotating display LCD Automatic reference switching (REFI/ REFII) by the measurement inversion Clamping knob Base 100 with clamping system for additionnal bases Measuring anvil with pin ø 4 (measuring ball probe M2.5 in standard) 27
22 Depth gauge S_Depth PRO DIMENSIONAL DRAWING Ø 112 B A (course) TECHNICAL SPECIFICATIONS Measuring range Max. Error µm Repeatability µm A L S_Connect : Power 2 References PRESET function ± 1 digit 2) see cables chapter USB / RS232 / Digimatic / Wireless 2) 28
23 Depth gauge BASIC INSTRUMENT S_Depth PRO Instrument according to technical specifications Lithium battery CR2032 included Instruction manual COMPATIBLE ACCESSORIES Additionnal base Additionnal base Additionnal base Ball probe M2.5 (standard) Length Anvils UP&DOWN Anvil with pin Ø4 APPLICATIONS Measure of an internal groove (height) thanks to the constant. 29
24 Protractor DESCRIPTION S239 Locking device Digital Display LCD, rotating display Height of digits 8.5 Fine adjustment knob Stainless steel, hardened and ground
25 Protractor S239 DIMENSIONAL DRAWING TECHNICAL SPECIFICATIONS Measuring range Max. Error Resolution Max. rotation speed Protection rating according to IEC 529 S_Connect : Opto Selection of measuring direction see cables chapter minutes of arc 1 minute of arc / / sec IP51 USB / RS232 / Digimatic / Wireless BASIC INSTRUMENT Instrument according to technical specifications Wooden box 2) Scale 200 ( ) Lithium battery CR2032 included Instruction manual 2) Fumigated, compatible ISPM 15 and NIMP 15 31
26 Protractor ACCESSORIES S Scale L 200 Scale L 300 Scale L Stand for vertical application and small angular measurements Square for small angular measurements APPLICATIONS Measurement with accessory type Standard measurement Measurement with accessory type
S_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I.
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected Absolute System S.I.
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
S_Cal PRO. Caliper. Proximity output data! DESCRIPTION PROXIMITY
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
CALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
S_Cal EVO. Professionnal Caliper DESCRIPTION
Professionnal Caliper DESCRIPTION S_Cal EVO Integrated data transmission New extra-large display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants,
DIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
MICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
HEIGHT GAUGE Hi_Cal 150 / 300
HEIGHT GAUGE 150 / 300 Especially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
HEIGHT GAUGE Hi_Cal & Hi_Gage ONE
HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
500 mm INTERNAL MEASURING INSTRUMENTS
INTERNAL MEASURING INSTRUMENTS SYLVAC offers a large range of internal measuring instruments made of interchangeable or points mechanical heads and electronic units with digital display, integrated in
PRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
Summer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise
S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
mm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
Dial gauge testing stand M3
Dial gauge testing stand M3 DESCRIPTION probes (like P10 and P50) (P10 calibrated on channel 1 and P50 calibrated on channel 2) Fast fixing by knob-pulley Delivered with inspection software SYCOPRO II
Indicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
ALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Micrometers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016
Electronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
HEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
Bestsellers n 1. p.2 p.6 p.4 p.10
Bestsellers 2018 n 1 p.2 p.6 p.4 p.10 Validity: 1. 2. 2018 31. 7. 2018 2 S_Dial WORK Basic & Advanced Very easy to use Best ratio quality/price on the market Basic or advanced functions Data output Proximity/Power
CALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
Calipers. B-1
alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,
Metrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
Micrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
Horizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium
410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.
MarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969
Swiss manufacturer of precision measuring instruments since 1969 µ_prices Validity 01.01.14-31.12.14 Summary S_Cal PRO & S_Cal PRO µm p.2 S_Cal UL III p.3 S_Mike PRO p.4 S_Depth PRO p.5 X_TREME p.6 S_Dial
Calipers. B-1
alipers -1 L I P E R S THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation, they are a favourite
Micromar. a new generation with the reference-system
- 2 Micromar. micrometers Micromar. a new generation with the reference-system WATERPROOF MICROMETERS with this new generation of reference micrometers, mahr once again sets a new standard in the micrometer
SPECIAL PROMOTIONS! Summary. Swiss manufacturer of precision measuring instruments since 1969
Swiss manufacturer of precision measuring instruments since 1969 µ_prices Validity 01.01.14-31.12.14 Summary S_Cal PRO & S_Cal PRO µm p.2 S_Cal UL III p.3 S_Mike PRO p.4 S_Depth PRO p.5 X_TREME p.6 S_Dial
Swiss manufacturer of precision measuring instruments since 1969 PROMOTIONS JULY - SEPTEMBER. Summer 2017
Swiss manufacturer of precision measuring instruments since 1969 TIONS JULY - SEPTEMBER Summer 2017 Validity : 30.09.2017 200 EUR MARKET LEADING DIGITAL INDICATORS AT PREFERENTIAL PRICES ONE CONFIGURABLE
NEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
Measuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
ALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Calipers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016 Bowers achieved the latest
Digimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
U. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
Precision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
Metrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
HOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.
Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,
Data Sheet: LDS 1367 Date:
Product: Electronic Digital Measuring Set Page 1 of 5 Digital Caliper and Electronic Micrometer Set Set contains: 1 x Electronic Caliper: 150mm/6 1 x Electronic Micrometer: 0-25/0-1 mm Housed in a fitted
No Gimmicks No Hurdles
LIFETIME WARRANTY No Gimmicks No Hurdles e s n e s n o N o N We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues
HEIGHT GAGES YES. Frontal Squareness Deviation "/0.005mm "/.008mm "/0.011mm Air Cushion
Over 80 NEW items! HEIGHT GAGES Fowler-Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments.
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
AUGUST - OCTOBER 2017
AUGUST - OCTOBER 07 DIGITAL INDICATOR Digital indicator with ABS, Max./Min., TOLERANCE functions and more. With flat back + lug back. Measuring range: 0-,7 mm : Ø diameter: 56 mm Shank Ø: 8 mm 540 0000
Does everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
Sliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
Thickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
CALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
Micrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
SPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
Every tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
Bore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
NEW. Premium Micro Vickers Hardness Tester NOVA 240. See page 7 for details. NEW
Special SPRING / SUMMER 2016 Valid until 30th September 2016 (subject to availability) www.bowersgroup.co.uk Offers Sylvac S_Cal EVO Bluetooth Caliper See page 5 for details. See Bowers Group at MACH 2016,
Micrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
MICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
No Gimmicks No Hurdles No Nonsense
No Gimmicks No Hurdles No Nonsense We are proud to announce another industry first for Fowler. In our 67th year as a familyowned, independent USA metrology company, Fowler continues to lead the way. NEW!
Explanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process
info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 8 9 10 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier explanation
TABLE OF CONTENTS WARRANTY
WARRANTY ELECTROMATIC Equipment Co., Inc. (ELECTROMATIC) warrants to the original purchaser that this product is of merchantable quality and confirms in kind and quality with the descriptions and specifications
Holtest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
Multi-functional Length Calibrator
Multi-functional Length Calibrator Invented Design Manufacture Taiwan invention patent German innovation patent United States invention patent Multi-functional Length Calibrator Multi-functional Length
MAHRLIGHTS. From j 215,-- SPRING PROMOTION. MarCator. Digital indicators with System PROMOTION PRICES VALID UNTIL 31 MAY 2012
+ MAHRLIGHTS MarCator. Digital indicators with System From j 215,-- SPRING PROMOTION PROMOTION PRICES VALID UNTIL 31 MAY 2012 2 Mahrlights. Spring Promotion MarCal. Digital Caliper 16 EWR with Reference
Heightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
ELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
Digimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages. New Products. SuperCaliper ABSOLUTE. Coolant Proof Caliper ABSOLUTE
Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages New Products SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper INDEX Caliper
New Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
i-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
Heavy duty frame Extra large display
Over 50 NEW items! Bluetooth Ultra-Cal VI Electronic Calipers 54-100-167-0 NOW available with ISO Cert. IP67 rated Available with or without Bluetooth Heavy duty frame Extra large display Order No. Description
Electronic indicators, Dial Gauges, Precision Indicators
Electronic indicators, Dial Gauges, Precision Indicators F-1 E LECTRONIC I NDICATORS AND D IAL G AUGES EASY-TO-USE AND VERSATILE As manufacturer of a full range of precision dial gauges for more than 50
DIAL GAUGES. K-1
DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output
Dial Gauge KM 4/5 T. of our Precision Dial Gauge series offer reliability, The well thought-out design, accurate components and robust construction
Dial Gauge M 2 T Dial Gauge M 2/30 T Range 30 mm Accuracy according to Käfer works standard Dial Gauge KM 4/5 T Range 5 mm Bezel-Ø 40 mm Precision Dial Gauges The well thought-out design, accurate components
BEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
Height Gauges. Height Gauges K-1
Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in
TESA UPD Gauge Block Comparator with a 25 mm Measuring Span
TESA UPD Gauge Block Comparator with a 25 mm Measuring Span Direct measurement of gauge blocks with a variation in nominal length of up to 25 mm or 1 in. Allows the number of required reference gauge blocks
Inside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
50 NEW. Over. items! Valid January 1 st - April 30 th
Over 50 NEW items! Valid January 1 st - April 30 th Fowler - Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult
Micrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring
Some of our LOWEST. prices of the year!
Some of our LOWEST prices of the year! Scan F60 & F60T Optical Measuring Center The all NEW Fowler-Sylvac Scan, developed to measure even the most demanding of cylindrical parts. All new camera and optics,
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
Visit us at Booth No September 10 th - 15 th. Enter For A Chance ToWIN! Register at
Visit us at Booth No. 135616 September 10 th - 15 th Enter For A Chance ToWIN! Register at www.fowlerprecision.com/win Fowler-Bowers BLUETOOTH XTH3 Holematic Pistol Grip Sets FREE TABLET! with Complete
Discipline Mechanical Calibration Issue Date Certificate Number C-0386 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I. DIMENSION 1. CALIPER $ (Vernier / Dial / Digital) L. C. 10µm Φ Up to 600 mm >600 mm to 1000 mm 14.0 µm 19.0 µm Using Gauge Block Set, Caliper Checker, Length Bar & External
Mitutoyo General Catalog
Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer
V-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
LSM-500H/501H/503H/506H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units
LSM-0H/1H/3H/6H/512H Laser Scan Micrometer SERIES 544 Non-contact Measuring Units LSM-0H LSM-6H LSM-1H LSM-3H LSM-512H Using a high speed scanning laser beam, the Laser Scan Micrometer can accurately measure
Discipline Mechanical Calibration Issue Date Certificate Number C-0131 Valid Until Last Amended on - Page 1 of 10
Last Amended on - Page 1 of 10 I. DIMENSION 1. Angle Protractor Combination Set $ 0 to 180 35 min Using Angle Blocks, Sine Bar, Slip Gauges & Surface Plate by Comparison Method as per IS 4239 2. Bevel
Calibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
BEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com
BEST DEALS TESA quality measuring instruments at the best prices. Valid until 08.31.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com TESA-HITE 400/700 Robust and reliable. Ideally
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
Form Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
NEW. Visit our NEW Website Over 100. Items! INDICATORS
Over 100 NEW Items! INDICATORS Visit our NEW Website www.fowlerprecision.com Tool-A-Thon 15.2 Highlightes Calipers up to 33% off, page 14 Outside Micrometer Sets 20% off, page 6 Fowler-Sylvac Indicators
Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
SAVE UP TO 20% PRODUCT PROMOTION FULLY CALIBRATED 2 YEAR WARRANTY UPDATED EDITION - OVER 40 ADDITIONAL PRODUCTS DISTRIBUTED BY:
SAVE UP TO 20% UPDATED EDITION - OVER 40 ADDITIONAL PRODUCTS PRODUCT PROMOTION DISTRIBUTED BY: FULLY CALIBRATED 2 YEAR WARRANTY Asimeto. Exactly what you need. Everything we do is as exacting as the tools
Discipline Mechanical Calibration Issue Date Certificate Number C-1056 Valid Until Last Amended on - Page 1 of 8. 0.
Last Amended on - Page 1 of 8 I. MASS 1. Weights (Conventional) $ 1 mg 0.020 mg F2 Class Standard Weights 2 mg 0.020 mg and Mass Comparator 5 mg 0.021 mg (Readability: 0.001/0.01 10 mg 0.022 mg mg) Calibration
Explanations. 6 Protection (IP-Code) acc. to DIN / IEC etc. Several Icons. Manufacturing process
info@vogel-germany.de - ww.vogel-germany.de Explanations 1 2 3 4 5 6 8 9 10 11 In our catalogue you will find several pictograms beside the text description. They should be helpful for a quick and easier
Depth Gage A standard measuring tool of industry
epth Gage standard measuring tool of industry epth Micrometer SERIES 329, 129 Interchangeable Rod Type This type uses interchangeable rods to enable wide-range measurement. Order Nos. 329-250-30, 329-251-30,