Organisational Kitchen Fittings Drawer and Front Extensions
|
|
- Amice Johnson
- 5 years ago
- Views:
Transcription
1 GRASS NOVA PRO TOUCH LATCH SENSO Application: For drawer and front pull-out Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with self opening mechanism by touching the front panel on any spot Adjustable: Front two dimensional adjustable Version: With anti-friction bearing and syncronization unit, straight inside wall, back panel dowel preassembled, double wall housing with easy clean lip, with hooks to easy click on the front panel Installation: To screw in side panel for 32 mm system Adjustability View from inside View from outside Height adjustability Loosening the screw (2) Move front panel with eccentric screw (3) in correct position Adjustability ±2 mm Tighten the screw (2) Side adjustability Pull clamp lever (1) to the backside and hold it Lift front a bit and move it over the ribbing Adjustability ±1. mm Release the clamp lever (1) Bathroom worlds Moved by Grass Grass moves with individuality. Living room worlds Moved by Grass Grass moves through the certainty of high-end quality. Bathroom worlds Moved by Grass Grass moves through differentiating design. SEA.24
2 GRASS NOVA PRO DELUXE TOUCH LATCH SENSO, height 90 mm Load capacity: 40 kg Colour: White aluminium, RAL 9006 Nominal length 270 mm mm mm mm mm mm mm Note Please order synchronization unit separately. Installation Back panel Locking unit Bottom width Carcase front edge Front panel Bottom width + 1 mm Nominal length + 19 mm SEA.2
3 NOVA PRO CLASSIC TOUCH LATCH SENSO, load capacity 40 kg Height 63 mm Height 90 mm Colour: White aluminium, RAL 9006 Nominal length Colour: White aluminium, RAL 9006 Nominal length 400 mm mm mm mm mm mm mm mm mm mm mm Installation Back panel Installation Back panel Bottom width Bottom width Front panel Front panel Bottom width + 1 mm Locking unit Carcase front edge Nominal length + 19 mm Note Please order touch latch senso synchronization unit separately. Bottom width + 1 mm Locking unit Carcase front edge Nominal length + 19 mm Note Please order touch latch senso synchronization unit separately. SEA.26
4 Accessories TOUCH LATCH SENSO Synchronization unit Area of application: To synchronize the runner Material: Aluminium, zinc alloy Carcase width Panel thickness 40 mm 16 mm mm mm ,200 mm mm 19 mm mm mm ,200 mm TOUCH LATCH SENSO Synchronization unit for cut to size Rail Lever Version Synchronization rail, length 1,080 mm Synchronization lever TOUCH LATCH SENSO Drilling jig Version: To accurately drill the locking unit for the TOUCH LATCH SENSO runner Instructions for use: 1. Depending on nominal length, insert the stop pin into the drilling jig and position jig against the cabinet. 2. Position the drilling jig on the installed TOUCH LATCH SENSO runner. 3. Drill the two fixing holes for the locking unit. SEA.27
5 GRASS NOVA PRO Double wall drawer system Area of application: For drawer and front pull-out solutions Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with soft close function Adjustability: Front two dimensional adjustable Version: With anti-friction bearing and synchronised pull-out, straight inside wall housing with easy, clean lip, with hooks to easy clip on the front panel Installation: To screw in side panel for 32 mm system DELUXE Version Adjustability CLASSIC Version Height adjustability Loosening the screw (2) Move front panel with eccentric screw (3) in correct position Adjustability ±2 mm Tighten the screw (2) Installation View from inside Carcase front edge Side adjustability Pull clamp lever (1) to the backside and hold it Lift front a bit and move it over the ribbling Adjustability ±1. mm Release th eclamp lever (1) Internal carcase depth = Nominal length + x Bottom length = nominal length - 19 mm Bottom Carcase front edge Back panel Drawer x = 3 mm Internal drawer x = 11. mm View from outside Installation Before press in After press in No groove or adjustment on bottom necessarry Bottom installation with claws or to screw SEA.28
6 GRASS NOVA PRO DELUX, height 90 mm Installation Colour: White aluminium, RAL 9006 Version: With AIRMATIC Load capacity: 40 kg Nominal length Extension length 270 mm 21 mm mm 281 mm mm 331 mm mm 381 mm mm 431 mm mm 481 mm mm 31 mm mm 81 mm Back panel Front panel Bottom width Bottom width + 1 mm Carcase front edge Kitchen of the world. Moved by Grass. Grass moves through differentiating design. Recognized with many awards and employed by the world's best designers - that's furniture hardware by Grass. Both hinge and slide systems offer impressive product design and function, which in turn enable unique furniture design. For the world's best and most attractive kitchens. SEA.29
7 GRASS NOVA PRO CLASSIC, height 63 mm Colour: White aluminium, RAL 9006 Version: With AIRMATIC Load capacity: 40 kg Nominal length Extension length 400 mm 381 mm mm 431 mm mm 481 mm mm 31 mm Installation Back panel Front panel Bottom width Bottom width + 1 mm Carcase front edge GRASS NOVA PRO CLASSIC, height 90 mm Installation Carcase front edge Colour: White aluminium, RAL 9006 Version: With AIRMATIC Load capacity: 40 kg Nominal length Extension length EL 270 mm 21 mm mm 281 mm mm 331 mm mm 381 mm mm 431 mm mm 481 mm mm 31 mm mm 81 mm Back panel Bottom width Front panel Bottom width + 1 mm SEA.30
8 GRASS NOVA PRO DELUXE/ CLASSIC Railing system Material: Tube steel, cover sleeve, front rail holder and back rail holder plastic Finish: Tube powder coated white aluminium, RAL 9006 cover sleeve, front rail holder and back rail holder anthracite Mounting timber back: Screw fixing of front and back rail holders Mounting steel back: Screw fixing of front rail holder, clip in back rail holder GRASS NOVA PRO Side railing system Supplied with 2 Cover sleeves 2 Front rail holder 2 Back rail holder Nominal length 300 mm mm mm mm mm mm mm GRASS NOVA PRO Cross railing system Supplied with 1 Railing 2 Cross railing holder For cabinet width 300 mm mm mm mm mm mm mm ,000 mm SEA.31
9 GRASS NOVA PRO Cross divider rail clip Colour Grey, RAL GRASS NOVA PRO Bottle holder clip Colour Grey, RAL Bottle holder for round railing GRASS NOVA PRO Synchronisation system Area of application: For very wide drawers, for side panel thickness 16 or 19 mm Installation: Screw fixing Nominal length For carcase width 900 mm 40 mm mm mm mm mm For carcase width 1,000 mm 40 mm mm mm mm mm For carcase width 1,200 mm 40 mm mm mm mm mm SEA.32
10 GRASS NOVA PRO Accessories Must be used with round railing (please order separately) Tool-free installation (retrofitting also possible) No drilling necessary Cross divider railing can be fitted Tilt adjustment of front by means of round railing Finish: Cover set grey, side element powder coated silver metallic, RAL 9006 or frosted glass (toughened) The side element may also be manufactured from any material with a thickness of 6 mm. (eg. glass, wood or acrylic) NOVA PRO Side panel fixing set Version For NOVA PRO CLASSIC For NOVA PRO DELUXE Packing: 1 pc NOVA PRO Side panel Nominal length Version 40 mm Smooth mm mm mm mm Ripped mm mm mm Packing: 1 pair SEA.33
11 Intelligent movement design for exclusive comfort. The demand for electronically controlled furniture is on the up, just like the demand for the handleless design. GRASS Sensotronic provides the only integrated solution. Drawers, pull-out units and base drawers not only open and close simply by tapping the front, but also think for themselves. The Sensotronic feels resistances, avoids collisions, protects against jamming and moves different weights up and down at the same set speed. GRASS Sensotronic is simple in assembly as well as in operation. SEA.34
12 GRASS NOVA PRO CLASSIC Rectangular side railing system Material: Tube steel, cover sleeve, front rail holder and back rail holder plastic Finish: Tube powder coated silver metallic, RAL 9006, cover sleeve, front rail holder and back rail holder silver metallic Mounting timber back: Screw fixing of front and back rail holders GRASS NOVA PRO Rectangular side railing Nominal length Length 300 mm 29 mm mm 34 mm mm 39 mm mm 44 mm mm 49 mm mm 4 mm mm 9 mm GRASS NOVA PRO Rectangular side railing fixing set Screw fixing Angle of front panel adjustment Press fitting Installation Screw fixing Press fitting SEA.3
13 GRASS NOVA PRO CLASSIC Rectangular railing accessories Area of application: For installation on front and back panel Material: Plastic Installation: For screw fixing Colour White aluminium, RAL GRASS NOVA PRO Rectangular cross railing For carcase width Length For side panel thickness mm 300 mm 207 mm mm 27 mm mm 307 mm mm 37 mm mm 407 mm mm 47 mm mm 07 mm For cut to size 913 mm GRASS NOVA PRO Rectangular cross section clip Colour White aluminium, RAL SEA.36
14 GRASS NOVA PRO Rectangular side railing with steel post Area of application: For 3 side railing systems, only usable for NOVA PRO CLASSIC Material: Steel Installation: To clip in front adapter and into double wall runner Front adjustment Nominal length Length 300 mm 286 mm mm 386 mm mm 436 mm mm 486 mm mm 36 mm mm 86 mm Adjustment screw Tighten adjustment screw, front panel move back Losing the adjustment screw, front panel move forward Back view GRASS NOVA PRO Rectangular front adapter for side railing with steel post Material: Steel Finish: White, RAL 9010 Screw fixing Press fixing Installation Screw fixing Press fitting Packing: 2 pcs. GRASS NOVA PRO Spacer Carcase front edge Area of application: For drawer runners behind hinged doors Version: The hole pattern is suitable for all GRASS NOVA PRO runners, the spacer can be used left and right Thickness: 2 mm Material: Plastic Colour White, RAL SEA.37
15 GRASS NOVA PRO Internal drawer fronts Turns your Nova Pro Drawer into an interior pull-out Suitable for drawer sides with height of 90 mm Finish: Powder coated silver metallic, RAL 9006 Anthracite front panel holder Drawer sides and side railings must be ordered separately For 19 mm side panel Front panel Front panel holder For carcase width 600 mm mm ,200 mm Colour Anthracite, RAL Packing: 1 pair Front panel with round railing Front panel holder for round railing For carcase width 600 mm mm ,200 mm Colour Anthracite, RAL Packing: 1 pair Front panel with rectangular railing For carcase width 600 mm mm ,200 mm Front panel holder for rectangular railing Colour Anthracite, RAL Packing: 1 pair SEA.38
16 META BOX Kitchen metal drawer Drawer runner single extension Area of application: For drawer runners Load capacity: 30 kg Material: Steel Finish: Plastic coated Version: With roller runner Front adjustable facility: Two dimensions Fitting to side panel: Screw fixing into 32 mm series drilled holes Height: 86 mm Extension loss AV: 9 mm Norminal length Extension length AL Colour 40 mm 37 mm Grey metallic, RAL mm White, RAL mm 407 mm Grey metallic, RAL mm White, RAL Drilling dimensions Back installation dimensions For Ø3. mm chipboard screws with 7 mm diameter head Front installation dimensions Bottom panel width +14 mm For press-in-front fixing brackets to pre-drill Ø10 mm x 12 mm For Ø4 mm chipboard screws or standard Euro screws with 8 mm diameter head SEA.39
17 Side railing set Material: Steel struts, plastic bracket Version: Railing can be rotated to adjust the incline of the front panel Supplied with: 2 adjustables rails, 2 rear fixing brackets Length Colour 40 mm Grey metallic, RAL White, RAL mm Grey metallic, RAL White, RAL Cross railing Material: Steel Version: Cross rail can be shorten Length Colour 1,000 mm Grey metallic, RAL White, RAL Cross railing connectors Material: Plastic Area of application: Used for connecting the cross railings Colour Grey metallic, RAL White, RAL SEA.40
18 Accessories for META BOX system Spacer Area of application: For installation behind hinged doors Installation: For screw installation into system 2 mm and 32 mm Finish Plastic white Door deflection roller Drawer Door deflection roller Area of application: For protection of swing doors Mounting Right Left Door Locking bracket Locking bracket Area of application: For central locks with Ø 7 mm locking pin Finish Nickel plated Drawer Supporting bracket Area of application: For mounting the cabinet rail when no side panel is available Thickness: 2 mm Installation: For screw fixing Finish Nickel plated SEA.41
19 Drawer Inserts Cutlery insert, injection moulded Cutlery insert, deep-drawn Material: Plastic (injection moulded) Colour: White Version: Deep-drawn from panel material, with wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm Material: Plastic (deep-drawn) Colour: White grained Version: Deep-drawn from panel material, with wide edge for cutting to exact drawer size For carcase depth: 00 or max. 600 mm Height: 7 mm Material thickness: 2. mm For carcase width 300 mm mm mm mm For carcase width For carcase depth 00 mm 300 mm mm mm mm mm mm mm For carcase depth 600 mm 300 mm mm mm mm mm mm mm SEA.42
20 Drawer Inserts Cutlery insert A B Material: Plastic Colour: Aluminium silver Version: With wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm For carcase width C D A 400 mm B 00 mm C 0 mm D 700 mm E 800 mm E A B Material: Plastic Colour: White grained Version: With wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm C E D For carcase width A 30 mm B 400 mm C 40 mm D 00 mm E 0 mm SEA.43
21 Drawer Inserts Cutlery insert A C B Material: Plastic Colour: White grained Version: With wide edge for cutting to exact drawer size For carcase depth: Max. 600 mm Height: 0 mm Material thickness: 2. mm For carcase width A 400 mm B 00 mm C 0 mm SEA.44
22 Drawer Inserts Plates organization for drawer Material: Polystyrene (PS) Version: With wide edge for cutting to exact drawer size For carcase depht: 600 mm For carcase width: 900 mm Material thickness: 2. mm Finish Width Height White mm 60 mm Silver coloured mm Edge profile for cutlery inserts Area of application: To fit on all types of cutlery inserts with thickness of basic material 2. mm Material: Plastic Finish Length Chromed matt 00 mm Mirror silver Packing: 2 pcs. Anti slide sheet Area of application: For lining the bottom of the drawer Material: Polystyrene - caoutchouc Version: Self-adhesive Finish Dim. (L x W) Grey 1,000 x 90 mm SEA.4
23 Drawer Inserts Drawer divider system Material: Stainless steel lengthways dividers and tray, plastic side panels and crossways dividers Finish: Brushed lengthways dividers and trays grey side panels and crossways dividers Nominal length: 470 mm Height: 64 mm For carcase width: 27 1,200 mm For carcase depth: 00 mm Compartment divisions Width 10 mm mm mm Accessories Length Trays, 88 mm wide Cutlary insert and divider Width 103 mm mm mm mm mm mm Divider Vertical panel End connector 264 mm mm mm mm mm mm SEA.46
Product Catalogue Hettich Hinges
edition Product Catalogue Hettich Hinges The Laminex Group customer services 0800 303 606 www.thelaminexgroup.co.nz Concealed Hinges Hettich Concealed Hinges Hettich Intermat & Ecomat Hinges Hettich Accessories
More informationGrommets & OFFICE Accessories
Groets & OFFICE Accessories SISO A/S MILEPARKEN 11 DK - 2740 SKOVLUNDE (COPENHAGEN) DENMARK PHONE: (+45) 45 830 900 FAX: (+45) 45 830 444 DISTRIBUTOR Contents GROMMETS 4-13 WIRE MANAGERS 14-17 keyboard
More informationSingle action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
More informationProfile Handles +DQGHO %DWDQJ 6 6.1
Profile Handles.1 Dim. A Dim. B 21 19.5 2,500 12.21.902 30 12.22.909 Dim. A Dim. B 11.5 19.5 2,500 12.20.905.2 Chrome plated Silver coloured anodized E/EV1 Stainless steel coloured Dim. A 300 295 12.2.201
More informationSnap locks and door locks
TopLine Cabinets - type A The modern design of the TopLine cabinets creates a visual calmness in the department. Behind the calm exterior you will find a highly functional diverse interior with endless
More informationGrommets & OFFICE Accessories
Groets & OFFICE Accessories The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements.
More informationGrommets & OFFICE Accessories
Groets & OFFICE Accessories The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve the right to make design improvements.
More informationTRADUR. Supporting elements. Balance. Supporting elements
TRADUR Balance columns have been ignored by designers for much too long. Only through new thinking in complex design contexts can contemporary design language come into its own both above and below the
More informationEcoTec SP tables and base cabinets
Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More information8mm 16mm F $ $ mm 19mm F $ $ mm 25mm F $ $ mm 32mm F $ $135.
Sheet Metal Part No Galv Sheet 800 x 600 x 0.55mm F106765 $11.50 $9.20 10 Galv Sheet 800 x 600 x 0.75mm F106766 $14.70 $11.70 10 Galv Sheet 800 x 600 x 0.95mm F105143 $24.70 $19.80 10 Aluminium Sheet (H34)
More informationMedical Rail Systems 147
Medical Rail Systems 147 Medical Rail Systems + unobtrusive + tidy + many variants 148 General Product Introduction Medical Rail Systems Different rooms, different walls - one solution: Medical rail systems
More informationKnürr Elicon Ergonomic. Modular. Future-proof. Control Room Infrastructure
Knürr Elicon Ergonomic. Modular. Future-proof Control Room Infrastructure Knürr Elicon Knürr Elicon VC and VC-E Series 4 Modular Workstation Systems Knürr Elicon Classic 14 Knürr Elicon Accessories 22
More informationSYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
More informationMotion technologies TIP-ON for doors
TIP-ON for doors Opening comfort for handle-less fronts Handle-less furniture is becoming more and more popular in the home. With TIP-ON, we offer a mechanical opening support system for handle-less furniture
More information5. Office furniture. 5. Office furniture. Laboratory furniture. Flexible and customised
5. Office Flexible and customised 5. Office Laboratory Your laboratory staff needs a thoughtfully planned office or work area and we have just the you have been looking for. Functional and customised to
More informationDrawer Safe. Black Case with Gray velvet interior. 18 1/4" wide x 6" Tall x 15 3/4" Deep. Part Number
Drawer Safe Comes with additional keys and auxiliary power jack for emergency opening. Key Pad Drawer Safe Complete Drawer Safe - strong steel case and drawer. Extremely well made quality safe ready for
More informationWireware Storage. edition 1: 2013
Wireware Storage Systems edition 1: 2013 Pull Out Pantry Tall Unit 300mm Soft closing Runner Capacity 100kg 1760-2060 1760~2060 DESCRIPTION Suitable for cabinet width 300mm Height 1760-2060mm includes
More informationAccessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
More informationArea of use The Provita wall rail system is suitable for use
WALL RAILS GENERAL WALL RAILS Area of use The Provita wall rail system is suitable for use in normal wards in intensive care wards in pre-operation rooms in the recovery room in doctors surgeries. Due
More informationTANDEMBOX antaro. Technical data sheet. As of
Technical data sheet As of 30.11.09 www.blum.com TANDEMBOX pull-out system Basic elements High fronted pull-out gallery B Product Description Space requirement TANDEMBOX Ordering information - Concealed,
More informationTOPRAIL LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S)
TOPRAIL LIMITED NATIONAL BUILDING SPECIFICATION DOCUMENT (N B S) Rev D TOPRAIL SHELVING / PROPRIETARY STORAGE SYSTEM DESCRIPTION: Rail hung storage system. All items are hung from the rail/uprights - only
More informationyour personal WARDROBE
your personal WARDROBE Colour 49/uu 20001/225 Wardrobe design to your PREFERENCES Save modular range is the smart wardrobe solution. Available in three heights; 200, 220 or 240 cm, with options of sliding
More informationDoor Furniture Locks Architectural Fittings Cabinetware Switches Bathroom Fittings
Door Furniture Locks Architectural Fittings Cabinetware Switches Bathroom Fittings www.tradco.com.au www.tradco.co.nz Contemporary Design Hardware Door furniture information 304 grade solid stainless steel
More informationInForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
More informationSTORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary
More informationStainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
More informationTopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389
opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in
More informationopuc p. 92 The opuc20 socket can be loaded with 30 kg. Also overlapping presentation in centre 625 mm is possible.
p. 9 opuc The opuc0 socket can be loaded with 30 kg. Also overlapping presentation in centre 65 mm is possible. The brackets are inserted and glued from rear into wooden shelves. This customised side hanging
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationProtection leads the way. ESD ELECTRICALLY CONDUCTIVE PRODUCTS ESD. 238 Vacuum forming ESD. 239 Injection moulding ESD
236 ELECTRICALLY CONDUCTIVE PRODUCTS ESD 238 Vacuum forming ESD 239 Injection moulding ESD 240 Products made of dissipative material RAKO ESD 241 Cases ESD 242 Dividers ESD Tray containers ESD 243 SILAFIX
More information#24.P20: Pull mechanism backset 20 mm, 25 mm and 30 mm 3/4"; 1 and 1 3/16 Thread size: M 4 KNOB NOT INCLUDED FOR ILLUSTRATION PURPOSES ONLY
Izerwaren Order # Pull mechanism for Cabinet Doors (slam latch type) Mechanism made of aluminum with brass parts. Silver or black finish Standard: 34 inch thick doors Backset: 19, 25, 30 mm or more Custom
More informationALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
More informationAudio Visual & Telecoms Rotation Rack. AVATR RACK
www.avatrav.com AVATR RACK Audio Visual & Telecoms Rotation Rack The AVATR Racking System from Midas Enterprise Group provides the perfect solution for todays audio visual & home entertainment installations.
More informationInForm Superstructures
Advantages InForm racks are fitted between the vertical profiles and thus ensure a generous amount of open working table surface. Devices are installed directly in the 3HU and 6HU racks, additional devices
More informationKITCHEN COLLECTION. Experience a new age of smart storage
2015 KITCHEN COLLECTION Experience a new age of smart storage 2 We are what we repeatedly do. Excellence, then, is not an act, but a habit. ~ Aristotle Give yourself a happy kitchen Dores has been in the
More informationFutura Soft Close Undermount Drawer Slides - A7555. Futura Soft Close Undermount Drawer Slides. Max. Cabinet Depth - Inside
Drawer Slides by SALE Futura Soft lose Undermount Drawer Slides - A7555 Front locking clips required for drawer slides to function (sold separately). Rear mounting brackets optional depending on chosen
More information19" TiRAX cabinet system. from page 3. 19" NETcell cabinet system from page 31. Open 19" racks from page 43
9" TiRAX cabinet system from page 9" NETcell cabinet system from page Open 9" racks from page Wall-mounting/stand-alone distribution systems from page 5 Wall-mounting enclosure systems from page 6 Air
More informationLimanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
More informationFENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION Tilt&Turn Hardware UNI-JET SCF WOOD
FENSTERTECHNIK BESTELLKATALOG WINDOW TECHNOLOGY ORDER CATALOG SECTION 06.3 Tilt&Turn Hardware UNI-JET SCF WOOD Table of Contents 06.3 UNI-JET SCF WOOD 06 3 DIRIGENT T&T Handle... 06.3.7 Tilt&Turn Sash...
More informationNew products spring 2018
New products spring 2018 MODULAR SOLUTIONS CASY SERIES DESKTOP CHASSIS Front module mounting Large access holes on rear Structured black powder coating (RAL9004) Aluminum extruded frame with plastic sides
More informationMUNDUS. The patch fitting with a unique design for toughened glass assemblies. MUNDUS Premium for unique, customised toughened glass assemblies.
MUNDUS Premium for unique, customised toughened glass assemblies. MUNDUS The patch fitting with a unique design for toughened glass assemblies MUNDUS Comfort for demanding toughened glass assemblies. dormakaba
More informationthe customised wardrobe
the customised wardrobe 1. Colour 49/aj 3. 2. 1. 20001/91 Wardrobe - 2000190 Handle - 2. Square - 3. Style design to your preferences Keep is the smart wardrobe solution featuring 200 cm high hinged doors.
More informationTHE ART OF SUCCESSFUL MERCHANDISE Professional information and communication with OCTANORM Display Systems. presentation systems
THE ART OF SUCCESSFUL MERCHANDISE Professional information and communication with OCTANORM Display Systems presentation systems AESTHETIC PRESENTATION AS A DESIGN PRINCIPLE Attract attention at your event,
More informationHardware & Accessories
Hardware & Accessories Assure that your installations and designs are completed in professional fashion by utilizing Stylmark s Hardware and Accessories. This catalog represents a collection of these items,
More informationArgenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationroller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES
roller shutters ALUMINIUM ROLLER SHUTTERS FOR SPECIAL VEHICLES ROLLER SHUTTERS INTRODUCTION The main target of company SRS is to offer competence and reliability to the customers in the production of aluminium
More informationergonomics design flexibility
STORAGE SYSTEMS ergonomics design EXPERT SOLUTIONS FOR PROFESSIONALS We focus on two product lines: technical furniture and storage systems. As professionals we recognize our customers needs and know how
More informationChapter 5 SHELF STOPPER
Chapter 5 SHELF STOPPER Perforated labels clamp page 70 Super gripper T page 72 Fla g s page 74 The promotions, special offers or price reductions must be always announced at the shelf by visible posting
More informationOTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any
More informationJuly Manual 10-slide disk outdoor viewer
Ing. J. de Wijs. Populierstraat 44, 4131 AR Vianen, the Netherlands Tel/Fax. +31 (0)347-372242 e-mail: info@dewijs-3d.com Website: www.dewijs-3d.com Design and production of stereoscopic instruments. July
More informationConcealed hinges. Concealed hinges. Function and design for perfecting motion. blum.com blum.com
Concealed hinges Concealed hinges Function and design for perfecting motion blum.com blum.com Quick reference inge cup centerpoint 9.5 door Ø35 C mm Conversion chart inch 1 1 /32.031 C = cup centerpoint
More informationConsole systems 1.4. Features. TopConsole system TP. One-piece consoles AP. Universal consoles AP. Console systems
Console systems Features he performance capability of a machine or plant is decided at the console and operating unit. Rittal have set new standards in ergonomics, visual appearance and functionality for
More informationMultitronic. Technical data
Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:
More informationMechanical Push. Mechanical Push
Mechanical Push Mechanical Push 183 Mechanical Push Release devices with adhesive strip The PUSH-System is a self-opening system for the doors of all types of handleless furniture. It consists of a series
More informationStorage Cabinets. Drawer Type (ordered separately) (ordered separately)
Storage Systems Storage Cabinets Cabinets, which combine a stylish industrial design with practical accessories to provide flexible and efficient small parts storage. Available in two cabinet sizes, 21.65
More informationColour 49/ak /304 Desk with mobile cabinet Bookcase Bookcase
wide REPERTOIRE Colour 49/ak 2. 3. 1. 1. 80400/304 Desk with mobile cabinet - 2. 80482 Bookcase - 80483 Bookcase Colour 49/ak 5. 4. 2. 3. 1. 1. 80421 Bookcase with 80432 2 Glass doors and 80431 Doors -
More informationVertiv VR Rack 1.0 GENERAL
1.1 SUMMARY Vertiv VR Rack Guide Specifications 1.0 GENERAL This specification defines the mechanical characteristics and requirements for the Vertiv VR Rack. A series of adaptive and scalable electronic
More informationLeg Systems & Fittings
Leg Systems & Fittings Product range: entre Pin Glides orner Plates Folding Legs Glides Height djusters Metal Height djusters Plastic Leg Plates Plastinails Single Wheel astors Table Legs Twin Wheel astors
More informationPRODUCT DESCRIPTION T-WORKSTATION. Table top: Three board thickness are available: 13 mm compact top, 19 mm, or 25 mm chipboard
T-WORKSTATION T-Workstation is a technologically advanced desk programme with high systemic smart features that can be shaped in various ways to meet individual customer needs. Simple to adapt to specific
More informationMERIT SERIES. For Today's Sensible Buyer MANUFACTURED IN THE USA
MERIT SERIES For Today's Sensible Buyer MANUFACTURED IN THE USA MERIT SERIES Desking and Storage for every work style and space Private, collaborative, individual or teaming Manufactured in Hillsboro,
More informationGrass TEC. Face Frame Hinge System. for CABINETRY. tec. The star in your cabinet
Grass TEC Face Frame Hinge System for tec The star in your cabinet Grass TEC Technical Features How to Specify TEC Hinges There are numerous variables that will determine the choice of hinge. Determine
More informationROLLER TUBE ACCESSORIES NEW
NEW RT.38SINGLE 38mm Rolltec Tube 1 Keyway 1mm x 5.8mtr (Standard) Lng 10 RT.38DOUBLE 38mm Rolltec Tube 2 Keyway 1.2mm x 5.8mtr Lng 8 RT.40HEAVY 40mm Rolltec Tube 2 Keyway 1.8mm x 5.8mtr (Heavy Duty) Lng
More informationDATEC-MOBIL-BOXES UP TO IP 65 PROTEC- TION CLASS DATEC-MOBIL-BOXES
PROTEC- TION CLASS UP TO IP 65 Subject to technical modification without notice. Typographical and other errors do not justify any claim for damages. Stand: 09/01 usa Copyright 2001 OKW Gehäusesysteme
More informationBook stand &sign system
Book stand &sign system Offering library visitors the right guidance isan important undertaking. Helping them to discover everything the library has tooffer in the form of titles is also important. In
More informationWARDROBE PLANNER.
www.hafele.com.sg WARDROBE PLANNER. WARDROBE PLANNER. HÄFELE GROUP SINCE 1923 HÄFELE WORLDWIDE Häfele is an internationally organized family owned and operated business with headquarters in Nagold, Germany.
More informationBathroom Accessories. Italian. Designed in Italy for Jendico
Bathroom Accessories Italian for Jendico p1 FUSION Combination Collection Accessories Fusion is a sophisticated collection of co-ordinating Bathroom Accessories based on simple, elegant lines with a distinctive,
More informationTWIST. By ACTIU.
By ACTIU By ACTIU By ACTIU Program OPERATIVE STRAIGHT DESKS RETURNS 0 00 0 9 00 0 TW TW TW TW TW TW TWIN & MEETING DESKS 0 TW TW TW Extension desk MEETING TABLES 0 0 Ø 00 Ø 0 TW TW9 TW8 TW8 TW Extension
More informationXL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
More informationFOR MELAMINE COLOUR SAMPLES GO TO:
CHILDRENS FURNITURE Unless specified, furniture will be supplied in Beech. Red, Blue, Yellow, multicoloured, off White or Grey available at no extra charge. FOR MELAMINE COLOUR SAMPLES GO TO: www.qls.net.au
More informationus: For latest prices and delivery to your door visit MyTub Ltd
97 Our stylish range of wall mounted accessories combine design innovation and top quality manufacturing to offer a comprehensive collection, with something to suit any style of bathroom. 98 Soap Dispensers
More informationCatalogue 2018/19 UK System 900
Catalogue 2018/19 UK System 900 Accessories Support Grip Sit HEWI Sanitary 1 System 900 Design and function System 900 has been designed for use in the professional care sector. Sophisticate design in
More informationKWS Door Hardware. Building hardware
KWS Door Hardware Building hardware Contents Informations General informations Page 3 Door Hardware Door Handles Page 4 Modular System Page 6 Door Holders and Gate Holders Page 8 Door Stops Page 10 Flush
More informationGALVANIZED-COATED SHELFING SYSTEM SHELVING FOR FOOD
ALVANIZED-COATED SHELFIN SYSTEM SHELVIN FOR FOOD ALVANIZED COATED SHELVIN ALVANIZEDRAL 7035 Entirely made of first grade steel and cold-profiled with galvanized steel according to the Sendzimir process
More informationKWS Modular System for Door Handles The stable and rapid solution for DIY. Building hardware
The stable and rapid solution for DIY Building hardware Contents Contents Contents... Page The KWS Modular System... Page 3 The series: Structure of modular support... Page 4 Complete door handles... Page
More informationApplications : LA-51-1 LA-52-1 LA-51-2 LA Features : LA-51-3 LA-52-3 LCD SUPPORTER KEYBOARD ARM
Applications : It goes well with partition boards and tracks in an office, or Medicine table at a dentist, or Medical equipment at a clinic or mobile cart, or Industrial machinery or monitor system at
More informationWeatherproof enclosures for all corrosive environments
IP 66 MRIN INETS N ENLOSURES >>> Marina cabinets polyester - IP 66 - IK 10 www.klinkmann.com Weatherproof enclosures for all corrosive environments 362 56 362 76 Technical characteristics (p. 289) IP 66
More informationThe layout connection system (snap-on) keeps the dividers in place and reduces noise caused by vibrations. Front to Back Partition
Partitioning Accessories The layout connection system (snap-on) keeps the dividers in place and reduces noise caused by vibrations. Front to Back Partition Divides the drawer along its depth; Dividers
More informationTWIST. Design Enrico Frigerio by FDG.
Design Enrico Frigerio by FDG Program OPERATIVE STRAIGHT DESKS RETURNS 0 00 0 9 00 0 TW TW TW TW TW TW TWIN & MEETING DESKS 0 TW TW TW Extension desk MEETING TABLES 0 0 Ø 00 Ø 0 TW TW9 TW8 TW8 TW Extension
More informationLOSS PREVENTION CERTIFICATION BOARD (LPCB) APPROVED PRODUCTS
LOSS PREVENTION CERTIFICATION BOARD (LPCB) APPROVED PRODUCTS Technical Datasheets www.rocheystems.co.uk E37 ELITE SR1 Insurance-approved shutter suitable for high security domestic and commercial applications
More informationSwing Doors Personal Guiding Bars Card Reader Posts
Swing Doors Personal Guiding Bars Card Reader Posts Adaptable design «The use of suitably-designed swing doors, personal guiding bars and card reader posts allows us to provide barrier-free access to our
More informationIt s electric. COMPLETE CATALOGUE 2013 / 2014 Innovative products for the professional user. ENGLISH / 2013/14
ENGLISH / 2013/14 Electrical materials IT power distribution Manufacturing Facility systems COMPLETE CATALOGUE 2013 / 2014 Innovative products for the professional user. It s electric. BACHMANN / Complete
More informationworkstation acessories ErgoChair ergonomic chair designed for the factory worker
workstation acessories ErgoChair ergonomic chair ErgoChair ergonomic chair designed for the factory worker the backrest and seat foot ring adjustment ranges are designed to cover a large variety of production
More informationCT PEDESTAL. With its cubical shape, it makes its presence felt in the workplace, offering storage space for documents and personal items.
CT PEDESTAL The CT Pedestal impresses with its clear design and very high level of functionality. It is the mobile addition to office furniture that makes offices appear practical, flexible and modern.
More informationDisplay Systems SYSTEMS. Display with Elegance
Display Systems SYSTEMS Display with Elegance TABLE OF CONTENTS SMART ROLLER BANNER...2 QUICK BANNER...3 SNAP FRAME 25MM PROFILE / 45...4 BEST BUY LEDBOX SINGLE SIDED...5 WALL SIGN SYSTEM...6 WALL MOUNTED
More informationINDUSTRIAL WORKSTATIONS. The new dimension at the interface between man and machine for enhanced workspace safety ergonomics
INDUSTRIAL WORKSTATIONS The new dimension at the interface between man and machine for enhanced workspace safety ergonomics Diversity is the strength of. More workspace than with a PC enclosure. More compact
More informationC30. Other New Zealand made ranges. Enquire with your furniture provider regarding other Profile products and services.
Other New Zealand made ranges Enquire with your furniture provider regarding other Profile products and services. 7 Doncaster Street, Airport Oaks PO Box 73034 Auckland Airport Auckland 2150 Phone 09 257
More informationSeceuro Range CD38 Built On
Seceuro Range CD38 Built On Technical Specifications www.hag.co.uk Advice Line 0800 072 3444 Seceuro Range CD38 Built On What is it made from The Seceuro range offers an all Aluminium Construction Typical
More informationALPHA SIMBOX Small Distribution Boards
ALPHA SIMBOX Small Distribution Boards /2 Introduction /3 Introduction /4 Flush-mounting and hollow-wall distribution boards /5 Surface-mounting and hood-type distribution boards /6 Accessories /7 Dimensional
More informationMICROPHONE stands & accessories
MICROPHONE stands & accessories 03 Microphone Stands & Accessories 300 SERIES MICROLITE MICROPHONE STANDS - Constructed with strong, lightweight Microlite tubular steel - Fast, smooth, non-slip boom swivel
More informationD-Net CABINETS. D-Net cabinets are a versatile racking system suitable for housing
D-Net CABINETS D-Net cabinets are a versatile racking system suitable for housing networking and various structured cabling components. D-Net Cabinets are manufactured in Taiwan in compliance with ISO9001:2000
More informationKnürr Mobile Equipment Carriers Universal Cart Systems Ergonomic, Modular, Future-Proof. Knürr Technical Furniture
Knürr Mobile Equipment Carriers Universal Cart Systems Ergonomic, Modular, Future-Proof Knürr Technical Furniture Knürr Mobile Equipment Carriers Mobility In Practice 2 Knürr EliMobil 4 Knürr DacoMobile
More informationKnürr Elicon Ergonomic, modular, future-proof Cost-optimized installation options. Technical Furniture
Knürr Elicon Ergonomic, modular, future-proof Cost-optimized installation options Technical Furniture Knürr Elicon Applications Capabilities 2 Knürr Elicon Strong points 4 Knürr Elicon Modules Side Panel
More informationTABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION
S6 USER S MANUAL TABLE OF CONTENTS SECTION 1 TABLETOP CONFIGURATION SECTION 2 TABLETOP CONFIGURATION ACCESSORIES SECTION 3 SLIDE CONFIGURATION SECTION 4 SLIDE CONFIGURATION ACCESSORIES SECTION 5 RACK MOUNT
More informationTerritory US Price List
Territory US Price List November 2016 Contents Product overview 003 Finishes 004 Product description 006 System overview 008 Functional shelf & hardware 009 Storage boxes 010 Accessories 011 Conditions
More informationSeries 417 LouvreMASTER Sun Control Shutters
Series 417 LouvreMASTER Sun Control Shutters ARCHITECTURAL SERIES Photo courtesy of Manly Windows DATE: MAY 2013 REPLACES: MARCH 2008 ARCHITECTURAL SERIES Series 417 KEY FEATURES/PERFORMANCE CHARACTERISTICS
More informationGrommets & OFFICE Accessories. ontent. Webpage
Groets & OFFIC Accessories Cs Cs 3 GROMMTs 4-15 Wire managers 16-19 The technical descriptions and dimensions in this catalogue, also those with the photographs and drawings, are not binding. We reserve
More informationOZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: Fax:
OZLINX Solutions Australia Pty Ltd 21 Ayton Street, Sunshine North, Melbourne VIC3020 Australia Ph: +61 3 93102440 Fax: +61 3 93102441 www.ozlinx.com OZLINX Cabinets OZLINX Cabinets OZLINX cabinets combine
More information