USER MANUAL INTELLIGENT SERIES THERMAL IMAGING CAMERA

Transcription

1 USER MANUAL INTELLIGENT SERIES THERMAL IMAGING CAMERA Thank you for choosing our product. Please thoroughly go through the user manual before operation and keep it well for future reference. All photo s in the manual are for reference only and specifications are subject to the phisycal product. turtletoughsensors.com

2 USER MANUAL TT SERIES INTELLIGENT The product is a handheld thermal infrared imager for temperature measurement. It is designed with /19200 effective IR pixels; and is configured with laser, illuminating lights and visible light of 5 mega-pixel. The product can be connected to PCs, SD cards, mobile devices (IPHONE or Android devices), HDMI displays etc., meeting requirements for various applications. IMPORTANT This is a general manual covering multiple models of thermal imagers from a common product line, so some functions and descriptions in the manual may not apply to your thermal imagers.

3 PRECAUTIONS Please always follow the following precautions strictly: Keep the device as stable as possible to prevent shaking violently. Don t use the device at operating temperatures not allowed nor place it in an environment at a storage temperature not allowed. Do not align the device with strong thermal emitters, such as the sun, lasers and spot welders. Don t expose the device in a dusty or moist environment. Prevent water from splashing onto the device when using it in an environment with water. Cover the lens when not using the device. Place the device and all its accessories into a special packing box when not using it. Do not block any hole on the device. Do not knock at, throw or vibrate the device and its accessories so as to prevent damages. Please don t disassemble the device so as to prevent it from being damaged possibly and you from losing warranty. Don t use the TF card for other purposes. Don t use the device in an environment exceeding its operating temperature so as to prevent possible damages. Do not apply dissolvable or similar liquid to the device and cables so as to prevent possible damages. The device is powered by a rechargeable Lithium-ion battery so users must follow the following precautions strictly in order to use it safely: Never try to open or dismantle the battery. Don t place the battery in a high temperature environment or nearby a high temperature object. Don t short-circuit the battery. Don t put the battery in a moist environment or in the water. Once the liquid leaked from the battery enters eyes, flush the eyes with clear water immediately and take corresponding medical cares. Please charge the battery as introduced in the manual and follow the charging steps and precautions. Wrong charging may heat or damage the battery or even cause injuries. Pull out the battery if the device will not be used for a long time. Wipe the device as described below: Non-optical surfaces: Use clean and soft cloth to wipe non-optical surfaces of the thermal imager when necessary. Optical surfaces: Please avoid staining the optical surface of lens when using the thermal imager, especially avoid touching the lens with hands since the sweat on the hands may leave traces on the lens and corrode the optical coating on the lens surface. When the optical lens surface is stained, wipe it with special lens wiping paper.

4 PRECAUTIONS Precautions for use of batteries: The battery can be charged repeatedly. However, the battery is a vulnerable part. If standby time of the device is largely shortened, please replace its battery with an original one provided by the company. If the device operates for a long time especially at high temperatures, its surface will warm up normally. When it s hot, please stop charging it and move it to the shade. Please avoid touching hot surfaces for a long time. When charging the device, it s suggested to use original batteries and charge cables provided by the company. Battery charging time varies with temperatures and its use. When the battery level is low, the system will give a low battery level prompt. When the battery level is too low, the system will be turned off automatically. If the device gives no response when the power button is pressed, the battery has been run out and the device can be launched only after being charged with an original charger for more than 10 minutes. When the battery is charged, the side indicator light on the device will always be red. When the battery is fully charged, the side indicator light on the device will turn green from red, indicating that it s not necessary to chargethe battery any more. Not 未充满 fully Fully charged 已充满 charged (Charging ( 充电指示灯 indicator ) light)

5 CONTENTS Chapter 1 List of items 8 Chapter 2 List of product components 10 Chapter 3 A Glance at Functional Areas of the Device 13 A Instruction to each functional area 14 B Gallery 15 C Short-cut menu 16 Chapter 4 Observation 17 Image mode switch 18 Temperature measurement 19 E-zoom 20 Chapter 5 Shooting 21 Picture shooting 22 Adding notes 23 Adding shooting notes 24 Adding text note 25 Adding audio note 25 Adding graffiti note 26 Video recording 27 Real-time analysis 28 Adding/removing the analysis object 28 Resizing the analysis object 29 Palette switching 30 Manual brightness/contrast control 31 Temperature difference analysis 32 File browsing 33 Picture analysis 34 Picture editing 34 Picture zoom-in/-out 35 PDF creation & printing 36 Video replay 37 Isotherm 38 Down isotherm 38 Up isotherm 38 Outside-the-range isotherm 38 Customizable emissivity 39

6 CONTENTS Chapter 6 Global Settings 40 System settings 41 Central temperature cursor 41 Temperature measurement range 41 Switch of temperature units 41 Switch of distance units 41 Alarm settings 42 High temperature alarm 42 Low temperature alarm 43 Brightness 43 Scheduled shutdown 43 Scheduled sleep 44 Volume 44 Vibration feedback 44 Automatic lens recognition 45 Disabling automatic lens recognition 45 Full Temperature Marker 45 Color of isotherm 45 Local settings 46 photo setting 46 Report setting 46 Date/Time 46 Languages 47 Watermark settings 47 Connection settings 48 WIFI switch 48 WIFI hotspot configuration 49 About upgrade 50 TF card upgrade 50 Memory space 50 Formatting the TF card 51 Restoring the default settings 51

7 CONTENTS Chapter 7 Connection with External Device 52 Port Connection 53 Mini HDMI Interface 53 USB Interface 53 Used along with Application Software 54 Installing Memory Card and Lens 56 Installing Memory Card 56 Removing Memory Card 57 Installing Optional Lens 58 Installing High-temperature Lens 59 External Connection 60 Wireless AP Setting 60 Latest version IOS/Android Acquisitions 60 Chapter 8 Troubleshooting Guide 61

8 Chapter 1 List of Items Standard accessories: Thermal imager Lithium battery (1) Adapter (including an adapter plug) USB cable Wristband HDMI connecting line Quick operation guide Specification Compact disk List of accessories TF card (16GB) Optional items: Lithium battery Portable package Charging dock

9 LIST OF ITEMS User Manual ACCESORIES es of 1 Cont 8 Copyright Product CD 1 Shipping Content Shipping content Accessories Qty List Card , Wuhan Guide CTP Gloves Set 1 Infrared camera with lens Sensmart Infrared Tech Co., TF Card(16GB) Ltd. 1 D Series Intelligent Thermographic IR Camera HDMI Cable (2m) Charging Dock(only for D384A) 1 Standard accessories Li-ion Battery HDMI Cable (2m) USB Infrared camera with lens Power Adapter Adapter Plugs Pictures of Contents Dimensions 470mm 360mm 210mm Li-ion Battery Optional x1 accessories Copyright Li-ion Battery Power Adapter x1 Camera Pouch 2017, Wuhan Guide Adapter Plug Sunshade x1 Sensmart Tech Co., Ltd. Charging Dock USB Cable (2m) Wrist Strap D Series x1 Intelligent Thermographic IR Camera Li-ion Tripod Battery Mount HDMI Wrist Cable Strap (2m) CTP USB Glove D Series Cable Set (2m) TF Intelligent Therm USB Cable Bluetooth x1 Headset (only for Power D384A) Adapter D Series Intelligent Therm HDMI Cable Shipping Copyright 470mm 360mm 210mm x1 Dimensions Quick 2017, Start Wuhan Guide Guide x1 Copyright Copyright User Sensmart Manual Tech Co., Ltd. x1 2017, Wuhan Guide Li-ion Battery Product CD x1 Sensmart 2017, Wuhan Tech Co., Guide Ltd. Li-ion Wrist Strap Battery HDMI CTP Glove Cable Set (2m) USB TF Card(16G) Cable (2m) Sensmart Infrared Tech Camera Co., with Ltd. lens Li-ion Battery HDMI Accessories List Card Pictures of Contents x1 User Manual Quick Li-ion Start Battery Guide Access HDMI CTP Gloves Set x1 TF Card (16GB x1 D Series Intelligent Thermographic IR Camera Charging Dock (only for TT384A) x1 TF Card Tripod Mount (only for TT384A) Wrist Strap x1 CTP Glove Set TF Card(16G) Wrist Strap CTP Copyright Wrist Strap CTP User Manual Quick Start Guide Accessories List Card Optional accessories Product CD Camera Pouch Cha 2017, Wuhan Guide Li-ion Battery Sensmart Tech Co., Ltd. Adapter Plugs USER MANUAL Camera Pouch Sunshade Infrared camera with lens Power Adapter Adapter Plugs Li-ion Battery HDMI Cable (2m) USB Charging Dock Tripod Mount 4 / 8 Shipping Bluetooth Headset (only for D384A) Wrist Strap 1 USB Cable 1 HDMI Cable 1 Quick Start Guide 1 Tripod Mount (only for D384A) 1 D Series Intelligent Thermographic IR Camera User Manual Quick Start Guide Accessories List Card Wrist Strap CTP Glove Set TF Card(16G) Li-ion Battery HDMI Cable (2m) USB Cable (2m) D Series Intelligent Thermographic IR Camera User Manual Quick Start Guide Accessories User Manual List Card Product CD Camera Pouch Charging User Manual Dock Adapter Plugs Sunshade Bluetooth Headset (only for D384A) Tripod Mount Dock Charging Bluetooth Headset Quick Quick Wrist Strap CTP Glove Set TF Sunshade Camera Li-ion Product CD Camera Pouch Charging Dock Product CD Battery Shipping Dimensions: 470mm 360mm 210mm Sunshade Bluetooth Headset Optional accessories Product CD Cd Came Came Tripod Mount (only for D384A) 1 OPTIONAL ACCESORIES User Manual Quick Start Guide Access Charging Dock(only for D384A) 1 Quick Start Guide Sunshade Shipping content Sunshade TF Card(16GB) 1 Bluetooth Headset Sunshade CTP Gloves Set 1 Accessories List Card 1 Bluetoo Bluetoo Product CD 1 Camera Pouch Camera Pouch Bluetooth Headset Li-ion Battery Product CD Camera Pouch Cha User Manual 1 1 Guide Start Quick Charging Dock 5 / 8 Sunshade HDMI Cable 1 USB Cable 1 Wrist Strap 1 Adapter Plug 1 Power Adapter 1

10 Chapter 2 List of Product Components

11 List of Product Components 2 1 Illuminating light 8 Battery release key 2 Laser 9 Micro USB terminal 3 Visible light 10 TF card slot 4 Quick lens release key 11 Micro HDMI output terminal 5 Lens 12 Power supply terminal 6 Wrist belt buckle 13 Indicator light 7 Shooting key

12 List of Product Components 2 1 Launch button 4 Return key 2 Loudspeaker 5 Microphone 3 LCD display screen 6 Battery lock

13 Chapter 3 A Glance at the Functional Areas of the Device Instruction to each functional area Gallery Short-cut menu

14 A Glance at Functional Areas of the Device 3 A. Instruction to each functional area 1 Display area 4 Gallery 7 2 Control area 5 System settings 8 Palette 3 Central point cursor 6 Short-cut menu button 9 Enter real-time editing Status identificatio area

15 A Glance at Functional Areas of the Device 3 B. Gallery 1. Tap the [Gallery] button in the lower part of main interface to enter the A Glance at Functional Areas of the Device picture browsing interface and then double-tap any shot picture to view it. B. Gallery: 1. Tap the [Gallery] button in the lower part of the main interface to enter the picture A Glance browsing at interface Functional and then Areas double-tap the any shot Device picture to view it. 2. Tap the [Edit] button at the bottom to enter the analysis object editing areas. When the temperature measurement image is modified, the system will pop out a dialog box on the interface to prompt Save modifications or not before 2. Tap the [Edit] button at the bottom to enter the analysis object editing areas. exiting the interface, and then tap [Save] button to save modifications. When the temperature measurement image is modified, the system will pop out a dialog box on the interface to prompt Save modifications or not before exiting the interface, and then tap [Save] button to save modifications. User Manual 9

16 A Glance at Functional Areas of the Device 3 C. Short-cut menu This interface displays some short-cut operations that can be conducted to realtime images, mainly including IR mode switch, camera, mode switch, illuminating light switch, laser switch, wireless AP hotspot switch, etc. How to enter the short-cut menu (See image 1) 1. In the real-time image, slide the short-cut icon [ ] at the bottom of the interface upward, and then the system will pop up a short-cut menu interface. Image 1 Image 2 2. The short-cut menu includes the following contents: Camera mode: mainly used for control of real-time images and real-time recording. IR mode: Mainly used for control of the switch among IR mode, visible light mode, fusion mode and PIP mode. Illuminating light: mainly used for control of the start-up and shutdown of illuminating light module. Laser: mainly used for control of the start-up and shutdown of laser module. Hotspot: mainly used for control of startup and shutdown of wireless AP. Shutter compensation: double-tap real-time images, and then the system will conduct automatic shutter compensation and pop up a prompt message. (See image 1) E-zoom: 4x. USB real-time video: Start up and shut down the USB real-time video connection.

17 Chapter 4 Observation Image mode switch Temperature measurement E-zoom

18 Observation 4 Image mode switch Enter the real-time video, and tap IR mode in the short-cut menu multiple timesso as to conduct multi-mode switch operations to the current image. Images can be switched among the following four modes: A. PIP B. Fusion C. Visible light D. IR

19 Observation 4 Temperature measurement 1. In the real-time image, tap the short-cut menu [X] at the most right bottom of the screen. 2. Tap the materials setting button in the parameters menu, choose the emissivity of measured object and then double-tap the blank place on the screen to return the real-time interface.

20 Observation 4 Temperature measurement 3. Align the central point cursor with the measured object for temperature measurement. Rotate the outer lens clockwise or anticlockwise to adjust the focal length. E-zoom In the real-time image, tap the button [ ] at the bottom to call out the short-cutmenu, and then slide backwards to the E-zoom option to enable it so that the real-time image can be zoomed 4 times by sliding the status bar towards left and right.

21 Chapter 5 Shooting Picture shooting Video recording Real-time analysis File browsing Picture analysis Isotherm Customizable emissivity

22 Shooting 5 Picture shooting In the real-time image, press the [Shoot] button on the device to freeze images of the current scene, shoot and save its photos etc. Tap system settings shooting setting to set function of the shooting key to shooting so as to shoot pictures by pressing a key. 1. Press 1. the Press [Shoot] t button on the device to freeze freeze images. ima 2. In 2. the In the frozen interface, press the [Shoot] again button to again sa to save frozen images automatically.

23 Shooting 5 Adding notes 1. Tap the [Gallery] button in the middle of the main interface to enter the file browsing directory. 2. Double-tap the original images to be added with notes on the touch screen to preview individual files. 3. Enter the browsing interface of single images, and then tap the note icon in the lower part of the interface to enter the notes operation menu

24 Shooting 5 Adding shooting notes 1. Tap the picture note button in the tool bar below to enter the main interface for picture notes. (See image below) Shooting Adding shooting notes 1. Tap the picture note button [ ] in the tool bar below to enter the main interface for picture notes. 2. Tap the physical shutter button to shoot at most two visible light pictures, with visible light notes saved, as shown in the figure below. 3. Tap the [ Delete ] button in the right corner of the visible light picture just shot to delete the picture. (See image below) 2. Tap the physical shutter button to shoot at most two visible light pictures, with visible light notes saved, as shown in the figure below. 3. Tap the [ Delete ] button in the right corner of the visible light picture just shot to delete the picture. 20 User Manual (Image 2)

25 Adding text notes Shooting 1. Tap [ T ] button to add a text note 2. Adding Enter text the input note field of note text, and input valid information such as XXXX Tap [ Ok T ] button to at add the a top text right note; corner to save the text note 2. Enter the input field of note text, and input valid information such as XXXX; 3. Tap Ok button at the top right corner to save the text note. Shooting Shooting 5 Adding audio note 1. Tap [ ] button to enter the audio note interface and add an audio note; Adding 2. Tap [ audio ] to start notes recording; 3. Tap Stop button to end and save the recording file. Recording time of the 1. Tap the microphone button to enter the audio note interface and add an system is limited to no more than 60s, as shown in the figure. audio note 2. Tap to start recording 3. Tap Stop button to end and save the recording file. Recording time of the system is limited to no more than 60s, as shown in the figure. User Manual 21

26 hooting dding graffiti note Shooting 5 Tap [ Adding ] button graffiti to enter notes the graffiti interface and add a graffiti note; Buttons 1. at Tap the [ bottom ] button are to brush, enter the eraser, graffiti interface and color and add selection a graffiti note successively. The er may 2. tap Buttons any one, at the and bottom draw are brush, graffiti eraser, in and the color image selection field; successively. The user may tap any one, and draw graffiti in the image field 3. Additional 4 functional buttons represent Cancel, Back, Restore and Save from left to right, through which the user may operate on the image area. Additional 4 functional buttons represent Cancel, Back, Restore and ave from left to right, through which the user may operate on the image area.

27 Video Recording 5 Video recording 1. Switch to the real-time image and focus on the object (manual focus is necessary prior to clip shooting) 2. Tap the short-cut menu button at the bottom and the current interface will be switched to the video recording mode immediately following the camera mode tapped Video recording 1. Switch to the real-time image and focus on the object (manual focus is necessary prior to clip shooting); 2. Tap the short-cut menu button at the bottom and the current interface will be switched to the video recording mode immediately following the camera mode tapped; 3. Press the physical shutter to start recording, and the timing information will be shown on the top of screen. 4. Press the shutter again to end this recording, and the video data will be 3. Press the physical shutter to start recording, and the timing information will be saved. shown You on may the check top of and screen. play it in the gallery. 4. Press the shutter again to end this recording, and the video data will be saved. You may check and play it in the gallery. User Manual 23

28 Real-time analysis 5 Adding/removing the analysis object 1. Tap button on the right of shortcut menu on the real-time image, and enter the interface of adding analysis object, as shown in the figure 2. Temperature measurement of various analysis objects is available, such as linear, rectangle, round and point objects. Also, you may select to display the maximum, minimum and average temperatures as well as to center the display. With long pressing any analysis object on the touch screen, the system will pop up an object menu including the following functions: Label: temperature labels of the analysis object area can be controlled and displayed (Maximum, minimum and average) Label content: the maximum, minimum or average temperature label in the analysis object area can be displayed. Center: tap this button and the analysis object will be displayed in the middle automatically. Delete: remove the current analysis object.

29 Real-time analysis 5 Resizing the analysis object 1. Select any analysis object and its nodes will be selected and displayed by yellow markers 2. Move any node and the analysis object area will be changed.

30 Real-time analysis 5 Palette switching 1. Enter the main interface, tap the palette area on the right of the screen, and the system will pop up the palette options including White Hot, Lava, Iron Red, Rainbow 1, Arctic, Hot Iron, Medical, Red, Black Hot, etc. 2. The user may switch between the color band modes as desired, as shown in the figure

31 Real-time analysis 5 Manual brightness/contrast control 1. On the real-time image, double tap the maximum or minimum temperature value of the color band on the right of screen. 2. Maximum or minimum temperature value of the color band on the real-time video image will be locked. 3. Tap Max. Temperature or Mini. Temperature, and the system will pop up corresponding value menu automatically. 4. Following the suitable high or low temperature value selected, tap any part of the image, and this value will be saved to redisplay the lasted result.

32 Real-time analysis 5 Temperature difference analysis 1. Select at least 2 analysis objects, and tap the temperature difference button [ ] below the object tag to activate the temperature difference mode Before the temperature difference analysis After the temperature difference analysis 2. Exit from the temperature difference analysis: select Shortcut menu / Temperature difference, tap the activated temperature difference button [ ] again to quit the temperature difference status. Exit from temperature difference analysis

33 File browsing 5 Local pictures and videos 1. On the real-time image, tap the gallery button in the bottom middle to enter the main interface of file browsing, select Picture All, and the system will automatically display all local files. Files and videos in TF card 2. On the real-time image, tap the gallery button in the bottom middle to enter the main interface of file browsing, select the tag of SD card in the bottom right corner, and the system will display all files in SD card automatically.

34 Picture analysis 5 Picture editing 1. On the picture preview interface, tap any picture to enter the picture editing interface. 2. Tap the edit button, and the system will enter the editing mode automatically. In this mode, you may add or modify the analysis object, isotherm and temperature difference between two points for this picture. 3. Tap [Parameters] other attributes. button, Tand you may modify other attributes. exiting, as The shown setting will be saved after exiting, as shown in the figure.

35 Picture analysis 5 Picture zoom-in/-out In the picture editing mode, press and spread two fingers on th e screen. By this time, the picture will be enlarged by up to 10 times. Fold the fingers and the picture will be zoom out. Zoom in Zoom out The enlarged picture may be moved by sliding on the screen. Moving

36 Picture analysis 5 PDF creation 1. On the real-time image, tap the gallery icon in the middle of shortcut menu 2. Tap [Select] button and you may select no more than 5 pictures, as shown in the figure 3. Tap [Export as PDF] button in the bottom left corner and a PDF preview file may be created. PDF printing Wireless printing preview PDF printing 1. Select System settings Connecting setting, and connect to the wireless printing network (wireless printing) 2. Choose a picture on the gallery interface, and print out PDF (see PDF creation for more details) 3. Press [Print] button on the top right of the PDF preview interface 4. On the ready for printing interface, press the print button for wireless printing.

37 Picture analysis 5 Video replay 1. On the gallery interface, select Picture - Local video to enter the local video interface, and select a video Replay the video steps Tap "Play" button at the center of screen to play this video Tap the screen and the video replay panel will be presented Tap Pause button at the screen bottom and the video playing will be suspended

38 Isotherm 5 1. On the real-time image, tap the gallery button at the bottom to enter the file browsing interface 2. Select and edit an infrared image on the picture browsing interface 3. Call out the Edit menu at the bottom and select Object Isotherm Down isotherm 1. Call out the Edit menu and select Object Isotherm 2. Touch the icon in the isotherm bar, and the target scene will be in the mode of down isotherm image Up isotherm 1. Call out the Edit menu and select Object Isotherm 2. Tap the icon shown on the example image and enter the mode of up isotherm image Outside-the-range isotherm 1. Call out the Edit menu and select Object Isotherm 2. Tap the icon and enter the mode of outside-the-range isotherm image.

39 Customizable emissivity 5 1. Select Parameter-[Material] on the Edit menu. Multiple preset values are available, as shown in the figure 2. Modify the parameters as required by sliding the numerical value from 0.01 to 1.00, as shown in the figure Customizable parameters Reflected temperature: customizable from 0 to 100 Target range: customizable from 0 to 100 Relative humidity: customizable from 0 to 100%.

40 Chapter 6 Global settings System settings Local settings Connection settings About upgrade

41 System settings 5 In the real-time video interface, tap the setting button at the bottom of the screen to enter the global settings interface. In the settings interface you can modify the main parameters of the system, including temperature units, distance units, brightness, network connection, date and language. Central t Mainly co perature display th Central temperature cursor Mainly control the display of the central temperature cursor in the real-time screen, and the display the temperature data of the center. Tempera Set the ra of the cur Temperature measurement range Set the range of measurable target temperature of the current device. Switch of temperature units The C and F displayed in the system can be freely switched between each other. Default temperature unit: C Switch of distance units It can be switched between meter and feet. Default distance unit: meter

42 System settings 6 Alarm settings It is used to control the temperature and scope of the alarm, the default status is off The range of alarm temperature value need to be obtained in temperature measurement range; if the temperature range is set -20 C to 150 C, then the range of alarm temperature value should be selected in this interval There are high and low temperature options for selecting alarm range If the temperature range is set -20 C to 150 C, the alarm temperature should be determined in this interval. High temperature alarm Turn on the temperature alarm switch, set the alarm temperature range to high temperature, and set the alarm temperature value to -20 C When returning to the real-time temperature measurement interface, the device will immediately give an alarm sound Tap the bell icon to turn off the high temperature alarm sound.

43 System settings 6 Low temperature alarm Turn on the temperature alarm switch, set the alarm temperature range to low temperature, and set the alarm temperature value to 30 C When returning to the real-time temperature measurement interface, the device will immediately give an alarm sound Tap the bell icon to turn off the low temperature alarm sound. Brightness The user can manually adjust the brightness of the touch screen. Scheduled shutdown Options for scheduled shutdown : 5 minutes 10 minutes 30 minutes 60 min Never shutdown Default value: Never shutdown.

44 System settings 6 Scheduled sleep Options for scheduled sleep: 1 minute 5 minutes 15 minutes Never Sleep Default value: Never Sleep Volume Adjust the volume of the control device, or mute it. Vibration feedback Turn on or off the vibration feedback.

45 System settings 6 Automatic lens recognition The automatic lens recognition is enabled by default, and the corresponding option is automatically recognized according to the lens installed on the device. Disabling automatic lens recognition When the automatic lens recognition is disabled, users can manually select the standard, telephoto and wide-angle lens according to the characteristics of their own lens. Full Temperature Marker It controls the high and low temperature tracking mode in the real-time screen. It is not displayed by default (high and low temperature tracking is off). Color of isotherm The colors of high temperature, low temperature and interval isotherm are customizable.

46 Local settings 6 Photo Setting Set the extension lens manually. (Normal lens by default) Report Setting Modify all parameters for PDF report, including its logo, header, footer and model selection. (Provided for 3 preset models) Date/Time Set the extension lens manually. (Normal lens by default)

47 Local settings 6 Languages Multi-language switching is available. Watermark settings 1. Go to watermark settings, some options of the watermarks are available, including Logo, date, emissivity, humidity, reflectivity, GPS, azimuth, etc. 2. Return to the real-time screen, and take a sample picture 3. Press the short-cut replay button, enter the picture browsing interface, and select the picture just took for preview 4. All watermarks enabled are displayed at the bottom of the preview. ching is available.

48 Connection settings 6 WIFI switch If the WIFI icon appears at the top of the Home screen, you are connected to the wireless LAN. (Control the on and off status of WIFI module) 1. To select a network: Tap one of the listed networks and input the password (if required) To join a closed wireless LAN: Tap Other, and input the name of the closed network (you need to know the network name, security type, and password) 2. Password successes, enter the connection interface

49 Connection settings 6 3. You can enter the WIFI address setting interface by tapping the More Info button. Ignore network: Tap the More Info button next to the previously joined network and tap Ignore this network. WIFI hotspot configuration 1. Enter the Global menu - Connection settings WIFI hotspot configuration tab 2. In the configuration interface, input a valid hotspot name Camera and password , tap OK button to save them successfully 3. The custom settings of wireless AP hotspot's SSID and password are saved successfully

50 About upgrade 6 TF card upgrade Place the.apk file of the latest version of the upgrade package in the GCameraExt/update directory in the external TF card. Tap the upgrade button, the normal upgrade operation will be prompted, otherwise the upgrade fails, restart the device after upgrade Memory space It mainly shows the basic information of the remaining capacity of internal memory and external TF card. At the same time, users may select data storage media alternatively, including internal memory of the device and memory of the external TF card (Select the memory media: enter the memory interface of the device, users can choose internal memory or TF card for data storage) (Select the memory media: enter the memory interface of the dev

51 About upgrade 6 Formatting the TF card To start formatting, select a memory card slot, then select Yes. Please note that formatting will permanently erase all photos and other data on the memory card in the selected slot. Before formatting, be sure to back up as needed. Restoring the default settings 1. Enter the Settings menu - Messages Reset, and tap the Reset tab. 2. Activation of this function will reset the device to factory settings. Please be careful.

52 Chapter 7 Connection with External Devices Port Connection Installing Memory Card and Lens External Connection Latest Version IOS/Android Acquisitions

53 Port Connection 7 The product can be connected with external devices by HDMI and USB cables. Mini HDMI Interface Mini HDMI interface is mainly used to connect an external HD display. Please ensure the target display is provided with an HDMI interface. 1. Connect HDMI cable with the imager. 2. Insert Mini HDMI plug with its <HDMI > symbol towards the front of the device. 3. Connect the HDMI cable with HDMI IN port of the HD display 4. Turn on the HD display and switch the video input to the selected port. USB Interface 1. Viewing files stored in the internal memory Connect the USB cable with a desktop computer, and then open My Computer to view the icon of internal storage. Click it to enter the memory and find the folder containing the source image. The specific path is \SABRESD-MX6DQ\ TF\DCIM\GCamera\SourceImage. Note: Files with name starting with IRI are infrared images and files with name starting with VIS are visible light images. 2. View the files in TF card If you need to save pictures in the TF card, please go to Global Settings Information - Memory Space, and select TF card as the memory medium before shooting and then the pictures will be saved in the TF card.

54 Port Connection 7 Use USB cable to connect computer and then open My Computer to view the icon of internal storage. Click it to enter the memory and the path is \ SABRESD-MX6DQ\TF\DCIM\GCamera\SourceImage. Note: Files with name starting with IRI are infrared images and files with name starting with VIS are visible light images. Used along with Application Software 1. Start up the USB real-time video connection. On the real-time image, slide up the Shortcut Menu to start upthe USB rea time video connection, as shown in the picture

55 Port Connection 7 2. Connect the applications In Windows7 system, start up the infrared analysis applications and then select to enter video analysis - D Series list, the system will pop up two connecting ways: USB and AP hotspot. (Please ensure the IP address has been set as DHCP) 3. After selecting the USB connecting mode, click OK to connect the device.

56 Installing Memory Card and Lens Installing Memory Card and Lens 7 The product can use IT card. All images and videos can be recorded in local and IT card. The 32GB TF card is the maximal support memory. Ensure The product write-protect can use switch IT card. of memory All images card and is arranged videos can on upper be recorded part to allow in local and IT card. The 32GB TF card is the maximal support memory. write or delete. Ensure write-protect switch of memory card is arranged on upper part to allow write or delete. Installing Memory Card Installing Memory Card 1. Open 1. Open slot cover slot cover: slide following Slide the following arrow direction the arrow to direction open the slot to open cover,and the slot cover insert and the insert memory the memory card; card 2. Insert memory card into slot Insert memory card with the tag side facing you until clicks are heard 3. Close 2. Insert the slot memory cover card into slot: Slide Insert following memory the arrow card direction with the tag to close side the facing slot cover you until clicks are heard. Note: Remaining shootings depend on the residual storage of the memory card and recording quality of the image. 3. Close the slot cover: Slide following the arrow direction to close the slot cover. Note: remaining shootings depend on residual storage of memory Note: remaining shootings depend on residual storage of memory card and recording quality of image. card and recording quality of image. User Manual 59

57 Installing Memory Card and Lens Removing Memory Card Installing Memory Card and Lens 7 1. Please turn off the device first and then open the slot cover. (Confirm indicator puts out and open the slot cover.) 2. Remove memory card: Gently push the memory card and then release 3. Straightly pull out memory card and then close the slot cover

58 Installing Memory Card and Lens Installing Optional Lens Lens Installing Memory Card and Lens Install 1. lens Install lens: Press the button Press the Split button, to split align to align the the red dot of lens red dot of lens back with the red back with the red dot of the device. dot of the device. 2. Select lens Select appropriate lens, then clockwise rotate lens to install lens. 3. Uninstall lens Press the lens disassembly key and align the red dot on the lens back with that on the device. 2. Select lens: Select appropriate lens, then clockwise rotate lens to install lens; 4 (The wide angle lens) (The tele lens) 5 3. Uninstall lens: Press the lens disassembly key and align the red dot on the lens back with that on the device. 6

59 Installing Memory Card and Lens Installing High-temperature Lens Installing Memory Card and Lens Install lens: Insert high-temperature lens into the threaded hole of standard lens, then clockwise rotate lens to insert lens; 1. Install lens Insert the high temperature lens into the threaded hole of standard lens, then clockwise rotate lens to insert lens Uninstall lens: Anti-clockwise rotate high-temperature lens and then remove lens. 2. Uninstall lens Anti-clockwise rotate the high temperature lens and then remove lens. 4 (The High temp Filter)

60 External Connection 7 Wireless AP Setting 1. Bring up the shortcut menu interface under the home screen, directly tap Hotspot AP to turn on AP function. 2. Status bar will automatically display that the AP function has started and the signal searching is available by wireless network card; (SSID:GCamera) The SSID is the factory default name. If there is a need to modification, please refer to Chapter Connecting - WIFI Hotspot Configuration. 3. If there is a need to turn off the function, just tap AP button again. Latest Version IOS/Android Acquisitions For information, please visit our website IOS version: Please search with key word Thermography in Apple Store to obtain latest version. Android version: For domestic users, please search with key word Thermography in application market 360, Wandoujia, APPChina to download the version. For foreign users, please download with the key word Thermography in application market Google Play.

61 Chapter 8 Troubleshooting Guide

62 Trouble Shooting Guide PROBLEM CAUSES ACTIONS Insufficient electricity in battery Reuse battery after charging Start-up is not successful Poor contact of battery Plug of external battery is not put in proper place Remove battery, put it in battery compartment again and properly install the battery Pull the plug and reinsert the battery in proper place Obvious deviation between battery power indication and actual power usage Battery runs out Battery life is expired Replace with a fully charged battery Replace new battery IR Image is not clear Visible light image is not clear Temperature measurement is inaccurate Focusing has not completed Lens has misted up or been polluted Surrounding environment is too dark The front-end of visibl light has misted up or been polluted Target focusing is not completed Set the relevant parameters for temperature measurement incorrectly Not implement non-uniformity correction for a long time Temperature measurement starts immediately after start-up Manual focusing or auto-focusing to make the image clear Clean lens with specialized device Provide lighting Clean the front-end of visible light with specialized device Manual focusing or auto-focusing to make the image clear, then read temperature Change parameter setting or restore the default parameters directly Set the User Key in menus as compensation, press physical User key and then hear the sound from shutter, a non-uniformity correction is completed To ensure temperature measurement accuracy, we recommend you to start temperature measurement 5-10 minutes after start-up Long time no calibration To ensure accurate temperature measurement result, we recommend you to send back the imager for calibration once a year

63 turtletoughsensors.com