Leica IMS500 HD Manual

Transcription

1 Leica IMS500 HD Manual

2 Contents Safety regulations 3 Safety concept 4 Symbols used in this operating manual 4 Important Notes 5 Instructions on use 6 Information for the person responsible for the instrument 7 Care instructions 8 Accessories, maintenance and repair 9 Electrical data and ambient conditions 10 Unpacking 10 Instructions for the Wireless Tablet Control Option 17 Layout Creator 22 Close 27 Specifications IMS500 HD 28 Installation! 11 IMS500 HD - Installation Basic System without Computers 12 Quick Start! 13 Keypad functions 14 Additional Keypad functions for IMS500 HD Advanced Systems with computers and remote control 16 Leica IMS500 / IMS500 HD Manual 2

3 Safety regulations IMS500 HD Manual 3

4 Safety concept Symbols used in this operating manual This operating manual describes the special functions of the individual modules of the Leica IMS500 HD Systems Interactive Microscopy System and contains important instructions for their operational safety, maintenance, and accessories. You can combine individual system articles with articles from external suppliers. Please read the user manual and the safety requirements of the supplier. Before installing, operating or using the system, read the user manual. In particular, please observe all safety instructions. To maintain the unit in its original condition and to ensure safe operation, the user must follow the instructions and warnings contained in the user manual. Additional information about other instruments from Leica Microsystems Ltd. can be found online at Warning of a danger This symbol indicates especially important information that must be read and complied with. Failure to comply can cause the following: Hazards to personnel Functional disturbances or damaged instruments Warning of hazardous electrical voltage This symbol indicates especially important information that is mandatory to read and observe. Failure to comply can cause the following: Hazards to personnel Important information This symbol indicates additional information or explanations that intend to provide clarity. Explanatory notes ff This symbol within the text points to additional information and explanations. Functional disturbances or damaged instruments The "Safety concept" booklet contains additional safety information regarding the service work, requirements and the handling of microscope, accessories and electrical accessories as well as general safety instructions. Danger due to hot surface. This symbol warns against touching accessible hot surfaces, e.g. those of light bulbs. IMS500 HD Manual 4

5 Important Notes Description The Leica IMS500 HD Systems meets today's state of the art of technology. Nevertheless, hazards may still arise during operation. The potential risks are described below. Before installing, operating or using the instruments, it is required to read this user manual. In particular, please observe all safety instructions. Contact address Leica Microsystems (Switzerland) Ltd. Industry Division Max Schmidheiny Strasse 201 CH-9435 Heerbrugg (Switzerland) User Manual This user manual includes important instructions related to operating safety, maintenance and accessories. Your Leica IMS500 HD Systems comes with a printed manual. Keep it in a safe place, and readily accessible to the user. User manuals and updates are also available for you to download and print from our web site at Produced for Leica Microsystems from EBS Euchner Büro- und Schulsysteme GmbH Ernst-Leitz-Strasse 3 DE Heusenstamm Accessories from third-party suppliers You can combine individual system articles with articles from external suppliers. Please read the user manual and the safety requirements of the supplier. Original condition To maintain the unit in its original condition and to ensure safe operation, the user must follow the instructions and warnings contained in these user manuals. Legal requirements Adhere to general and local regulations relating to accident prevention and environmental protection. EC Declaration of Conformity Electrically operated accessories are constructed based on the state of the art of technology and are provided with an EC Declaration of Conformity. IMS500 HD Manual 5

6 Instructions on use Intended use The Leica IMS500 HD Interactive Microscopy System is for allowing the Teacher to select which microscope images will be shared with himself, other students, or a projector. Position the Leica IMS500 HD System so that it can be disconnected from the power supply at any time. The power cord must remain accessible at all times, because the power supply is foreseen as mains disconnecting device. Place of use Only use the system in closed, dust free rooms and between +10 C and +40 C. Protect the devices from oil, chemicals and extreme humidity. Never use electrical devices outdoors. Install electrical devices at least 10 cm from the wall and away from flammable substances. Avoid large temperature fluctuations, direct sunlight and vibrations. Non-intended use Using the system in any way contrary to the specifications in the user manual can lead to bodily harm and damage to objects. Doing so can impair the functions of the protective measures provided. Only use one of the following power cords*. Don t unscrew any mechanical components unless expressly instructed to do so in the instructions. The devices and accessories described in this operating manual have been tested for safety and potential hazards. The responsible Leica affiliate must be consulted whenever the instrument is altered, modified or used in conjunction with non-leica components that are outside of the content of this manual. Unauthorized alterations to the device or noncompliant use shall void all rights to any warranty claims. Transport If at all possible, use the original packaging for shipping or transporting individual modules. In order to prevent damage from vibrations, disassemble all moving parts that (according to the user manual) can be assembled and disassembled by the customer and pack them separately. Disposal Disposal must comply with locally applicable laws and regulations. Integration in third-party products When installing Leica products into third-party products, the manufacturer of the complete system or its dealer is responsible for following all applicable safety instructions, laws and guidelines. * Power Cords Power cable, 2.5 m, Switzerland Power cable, 2 m, USA Power cable, 2 m, EURO Power cable, 2m-2.5 m,bs Power cable, 2 m, Japan Power cable, 2 m, Argentina type K Power cable, 2m, Australia type F Power cable, 2m, China type L Power cable, 2m, Israel type I Power cable, 2m, Italy type E Power cable, 2 m, South Africa type D IMS500 HD Manual 6

7 Information for the person responsible for the instrument Information for the person responsible for the instrument Ensure that the Leica IMS500 HD system is used only by qualified personnel. Inform your Leica representative or Leica Microsystems (Schweiz) AG, Industry Division, 9435 Heerbrugg, Switzerland, immediately of any product defect that could potentially cause injury or harm. If the unit is modified or serviced by unauthorized persons, is improperly maintained (as long as maintenance was not carried out by us), or is handled improperly, Leica will not accept any liability. Ensure that this user manual is always available. Carry out regular inspections to make certain that the authorized users are adhering to safety requirements. When instructing new users, do so thoroughly and explain the meanings of the warning signs and messages. Assign individual responsibilities for starting, operating and servicing the instrument and monitor the observance of these responsibilities. If you use accessories made by third-party manufacturers with the Leica IMS500 HD system, be sure that each such manufacturer confirms that the combination is safe to use and observe the product's user manual. Modifications and maintenance of the Leica IMS500 HD system may only be performed by professionals expressly authorized by Leica. Only original Leica replacement parts may be used in servicing the product. The electric installation in the building must conform to the national standard, e.g. current-operated ground leakage protection (fault-current protection) is suggested. Do not use the Leica IMS500 HD system unless it is in perfect condition. After service work or technical modifications, the unit must be reconfigured with observance to our technical requirements. IMS500 HD Manual 7

8 Care instructions General instructions Protect the Leica IMS500 HD against damp, vapors, acids, alkalis, and corrosive substances. Do not store chemicals in the vicinity. Protect the Leica IMS500 HD System from oil and grease. Never use chemicals to clean colored surfaces or accessories with rubberized parts. This could damage the surfaces, and specimens could be contaminated by abraded particles. It is advisable to enter a service agreement with Leica Service. Cleaning coated parts and plastic parts Dust and dirt particles should be removed with a soft brush or lint-free cotton cloth. Remove coarse debris with a moistened disposable cloth. Clinging dirt can be removed using petroleum ether or alcohol. Acetone, xylene or nitro-containing thinners must NOT be used. IMS500 HD Manual 8

9 Accessories, maintenance and repair Accessories Only the following accessories may be used with the Leica IMS500 HD System: The Leica accessories described in this user manual. Other accessories, provided that these have been expressly approved by Leica as being technically safe in this context. Maintenance them. The Leica IMS500 HD System is basically maintenancefree. To ensure that it always operates safely and reliably, we recommend that you take the precaution of contacting the responsible service organization. You can arrange for periodic inspections or, if appropriate, conclude a maintenance contract with Repairs and service work Only original Leica Microsystems spare parts may be used. Before opening the instruments, switch off the power and unplug the power cable. Avoid contact with powered electrical circuits, which can lead to injury. It is advisable to enter a service agreement with Leica Service. For maintenance and repair, only OEM spare parts may be used. Service address In case of problems, please contact us as follows: Leica Microsystems (Switzerland) Ltd. Industry Division Max Schmidheiny Strasse 201 CH-9435 Heerbrugg (Switzerland) Phone IMS500 HD Manual 9

10 Electrical data and ambient conditions Unpacking Electrical data See specifications page Environment Temperature for use +10 C +40 C Storage temperature -20 C +52 C +50 F +104 F Manipulation shock 25 mm on 50 mm hard wood Transport shock (unpacked) 80 g / 6 ms Transport shock (packed) 800 mm free fall Transport vibrations (unpacked Hz / 1.5 g Atmospheric pressure "in use" and for storage: mbar Humidity in use and for storage: 20 90% Installation Category II (Overvoltage Category) Pollution degree 2 Carefully remove the system and any components from the packing carton. Check the components against the planned configuration. Optional items such as camera adapters, cameras, and carrying cases are not shipped as part of the standard equipment. These items are delivered in separate packages. Please do not discard any of the packing materials. They should be used for safely storing and transporting the instrument should the need arise. IMS500 HD Manual 10

11 Installation! Please Note: IMS500 HD: All HD displays must have DVI and HDMI connections and DVI cables (some displays don't come with DVI cables included, therefore, be sure they are supplied with the display) Some manufacturers displays require that the camera resolution is changed to 720P All HD displays must be of the same model IMS500 HD Manual 11

12 IMS500 HD - Installation Basic System without Computers Leica HD Camera or PC Student Station STUDENT Student HD display with DVI input (from customer) Leica HD Camera or PC Teacher Station Teacher HD display with DVI input (from customer) TEACHER DVI cable from customer another Student module Large HD display or HD projector (from customer) DVI cable from customer Student DVI module DVI Central Unit cable /06/10/15/20 Central Unit DVI Keypads / 25/ 35/ 45 or antenna cable for Wireless Tablet Controls /09 Teacher DVI module DVI Central Unit cable /06/10/15/20 Second Leica camera or PC with DVI output IMS500 HD Manual 12

13 Quick Start! General information The instructor s and the student s keys may have a choice of 3 functions: Off, transmit and receive. The first key selected after VIDEO OFF becomes the transmitter. The next keys selected become the receivers. Hit a receiver s key again to deselect it. The transmitter is indicated by flashing light, receivers by permanent light. To select a new transmitter, hold the key pressed down for about 1 second or reset the system (VIDEO OFF) and start a new input sequence. IMS500 HD Manual 13

14 Keypad functions Clear & Reset the system The system is cleared and all selections are turned off. A new input sequence can be entered by selecting a key (e.g. instructor or any student) who becomes the transmitter. Then select the keys of the receivers of this screen image, e.g. student 1. Instructor to all students All students receive the instructor s screen image. The instructor s screen is automatically set as transmitter (if there is no other transmitter selected). Instructor to selected students Press INSTR. + S1 to select the instructor as transmitter. Student 1 will receive the instructor s screen image. Other students may also be added to this selection as receivers by pressing INSTR. + Sx. + + View students work Student 1 is selected as transmitter and the instructor is automatically set as receiver. If there was still any transmitter selected when pressing S1, student 1 will be selected as receiver. Student 1 to all students Press S1 + ALL to select Student 1 as transmitter, and the instructor and all other students will receive his screen image. Projector Activation of the projector. The current transmitter is displayed onto the projector screen. + Student to Student Student 1 is selected as transmitter, other Students can be set a a reveiver. IMS500 HD Manual 14

15 (+) Blank all screens All screens are blanked when BLANK and ALL are pressed. The instructor remains the transmitter and his screen is active and can still be displayed onto the projector screen. To blank single screen press BLANK and select student(s) key to blank the screens. (+) Blank single students screen To blank single screen press BLANK and select student(s) key to blank the screens. (IMS500 HD ONLY) (IMS500 HD ONLY) Notebook Notebook screen can be broadcastet to a single student, a group, or all students, as well as to projector. Projector Notebook Sends notebook screen directly to projector, independent of other settings (e.g. INSTR. to ALL). Both settings are working simultaneously, VIDEO OFF will NOT turn off the Projector-Notebook function. To turn it off, hit the key again, or replace it by the function PROJ. INSTR. + Video Scanner of students` screens Hold down the ALT key while pressing the ALL key. The instructor receives all students` screens sequentially for about 3 seconds. In the case of the Wireless Tablet Control, do not hold down the Alt icon. Simply press the Alt icon first, then the All key. IMS500 HD Manual 15

16 Additional Keypad functions for IMS500 HD Advanced Systems with computers and remote control + Lock all keyboards and mice Hold down the ALT FUNCT key while pressing the KEYB LOCK key to lock all student s keyboards and mice. No video transmission is required. In the case of the Wireless Tablet Control, do not hold down the Alt icon. Simply press the Alt icon first, then the Keyboard Lock key. + Remote control of student 1 computer To control students 1 keyboard and mouse. A students screen must first be transmitted to the instructor. + Remote control of all student computers To control all student s keyboards and mouses hold down the ALT FUNCT key while pressing the REMOTE key. In the case of the Wireless Tablet Control, do not hold down the Alt icon. Simply press the Alt icon first, then the Remote key. Leica IMS 500 Manual 16

17 Instructions for the Wireless Tablet Control Option Before using the tablet for the first time, you must charge the battery. Only use the charger supplied with the Tablet or another 5Volt USB Power Supply. Unauthorized chargers and cables can explode the battery or damage the equipment. If the battery is completely discharged, you can not turn on the device even if the battery is charging. Bluetooth Antenna The antenna will be connected according to the drawing with a serial 9-pin cable to the Instructor-Box. (Connector: Keyb). IMS500 HD Manual 17

18 To start the Leica Microsystems control app select the icon Leica Microsystems on the home screen or through the application menu. Tap "Classroom 1" at the top of the screen. IMS500 HD Manual 18

19 Through the keypad shown on the screen, every single function of the IMS system can be controlled. A function can be selected by pressing a key or key combination. The transmitter is marked with a green bar, one or more receivers are marked with a red bar. See the function of each button in the Quick Start guide on the previous pages. IMS500 HD Manual 19

20 The options will be shown by touching following button in the lower part of the screen. IMS500 HD Manual 20

21 Options (Overview) Includes IMS500 HD User Manual Layout Creator To create individual room layouts. Close Closes the application. Current selections will not be closed. IMS500 HD Manual 21

22 Layout Creator IMS500 HD Manual 22

23 With the layout creator you can create your own seating arrangement or change an existing seating plan. After starting the layout creator, a selection menu appears. Now you can choose the antenna/room, whose plan you want to create or change. IMS500 HD Manual 23

24 If you have chosen an antenna or room the current plan will be shown. If there is no existing plan, an empty plan will be shown to create a new one. IMS500 HD Manual 24

25 Add a student At the touch on an empty field a selection menu appears to choose a student number for that field. IMS500 HD Manual 25

26 A selected student button (S1, S2 ) will be shown in the plan/seating arrangement. Remove a student If you want to remove a student number just touch the respective button on the tablet until it will be removed from screen. Save layout To save all settings open the option menu and choose Save Layout. IMS500 HD Manual 26

27 Close Close Layout Creator To close the Layout Creator open the option menu and choose Close. You will return to the main menu. When you select the appropriate classroom, you will see the changes you made. IMS500 HD Manual 27

28 Specifications IMS500 HD Keypad Type KP15 DVI Type KP25 DVI Type KP35 DVI Dimensions* (W-H-D) 12.5 x 4 x 17cm 15 x 4 x 21 cm 19.5 x 4.5 x 22 cm Weight ca. 400 g ca. 550 g ca. 700 g Power 5VDC and 10VDC supplied by Central Unit Connection 9 Pol, serial, RS-232 * Dimensions of keyboard only (no cables/plugs). Central Unit CU6 DVI CU10 DVI CU20 DVI CU32 DVI Dimensions* (W-H-D) 14 x 14.5 x 21 cm 24 x 15 x 28 cm 34 x 15 x 28 cm 45 x 15 x 28 cm Weight max. 2.7 kg max. 3.6 kg max. 5.4 kg max. 10 kg Power Consumption max. 50 W max. 100 W max. 200 W max. 200 W * Dimensions of rack only (no cables/plugs Power source Cooling Cables Boxes Boxes 110V -240V AC Hz Ajustable fan DVI-D male/male (24+1) prefabricated 1m up to 30 m Teacher DVI-Box / 19.5 x 2.5 x 12.5 cm / 445 g / +5V DC Charger Student DVI-Box / 11.5 x 2.5 x 10.5 cm / 250 g / +5V DC Charger IMS500 HD Manual 28

29 The statement by Ernst Leitz in 1907, With the User, For the User, describes the fruitful collaboration with end users and driving force of innovation at Leica Microsystems. We have developed five brand values to live up to this tradition: Pioneering, High-end Quality, Team Spirit, Dedication to Science, and Continuous Improvement. For us, living up to these values means: Living up to Life. INDUSTRY DIVISION The Leica Microsystems Industry Division s focus is to support customers pursuit of the highest quality end result. Leica Microsystems provide the best and most innovative imaging systems to see, measure, and analyze the microstructures in routine and research industrial applications, materials science, quality control, forensic science investigation, and educational applications. Leica Microsystems an international company with a strong network of worldwide customer services: Active worldwide Tel. Fax Australia North Ryde Austria Vienna Belgium Diegem Brazil São Paulo Canada Concord/Ontario Denmark Ballerup France Nanterre Cedex Germany Wetzlar India Mumbai Italy Milan Japan Tokyo Korea Seoul Netherlands Rijswijk People s Rep. of China Hong Kong Shanghai Portugal Lisbon Singapore Spain Barcelona Sweden Kista Switzerland Heerbrugg United Kingdom Milton Keynes USA Buffalo Grove/lllinois /2015 Copyright 2013 Leica Microsystems (Schweiz) AG, Max Schmidheiny Strasse 201, Heerbrugg, CH-9435 Switzerland. Subject to change. LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.