Trail Camera RANGER Mini Instruction Manual

Transcription

1 Trail Camera RANGER Mini Instruction Manual

2 Content 1: Camera Overview : Quick Start Guide : Installing the Batteries : Installing the SD Card : Power Switch and Buttons : Settings Map : Auxiliary Power : Mounting Tips... 9 Appendix Ⅰ: Technical Specifications Appendix Ⅱ: Parts List... 12

3 1: Camera Overview (Fig. 1 Operation Interface) (Fig. 2 Bottom View) Page 1

4 2: Quick Start Guide 2.1: Installing the Batteries We suggest that you use high quality, 8pcs, AA 1.5V alkaline batteries to maximize camera performance and battery life. Pay attention to the (+) or (-) molded into each sleeve to determine how to properly arrange the batteries. Negative battery terminals always contact the spring. Note: Do not mix different types of batteries Do not mix old and new batteries Recommend high-density and high-performance batteries, such as Alkaline Always remove batteries when not in use to prevent leakage 2.2: Installing the SD Card To enable power to the camera you must first install an SD Card in the designated slot at the bottom of the camera. You can use any SD Card storage size up to 32GB. You must also have the SD Card inserted into the camera to complete the setup process. Page 2

5 2.4: Power Switch and Buttons Slide the power switch to SETUP position, then you can start to customize your camera settings. (Fig. 3 Power switch) Power Switch: OFF: Power off(please remove batteries when not in use) SETUP: Customize camera settings ON: Working mode (the display screen will power off). Buttons: MENU: Exit/Enter Playback menu : Navigation button. Press to change the items. Press to change the parameters. OK: Confirm operation /Entering the Detection Test screen, press OK to manually take photo or video. (Click again to stop the video.). Page 3

6 2.5: Settings Map (Fig. 4 Main Screen) Quick Select: This camera allows the user to save several frequently used settings. Conveniently select one of the saved settings for faster camera setup. Detection Test: Allows the user to test the detection system of the camera. Walk in front of the camera, when the camera detects a movement, the red light will blink. You can also manually take pictures or video clips via the OK button. Playback :The user can playback the photos from the display screen. Press to switch photos. Press OK to exit. Settings: Change the camera settings here. Page 4

7 Page 5

8 Page 6

9 Page 7

10 Page 8

11 3: Auxiliary Power Your camera comes with an Auxiliary power jack. If you want to hook up an external 6V battery to power the camera, you can. A standard 4mm jack is required to make the connection. You can find external 6V power accessories at 4: Mounting Tips For best results, mount the camera approximately 48 off the ground and 25ft away from the target area. To enhance the flash, we recommend positioning the camera towards an area with a backdrop to reflect the maximum amount of light. Note: 1. The sun should not be shining directly on the face of the camera. Page 9

12 (Fig. 5) 2. Reflect with trees or other objects to add more light to your target. (Fig. 6) 3. Avoid placing the camera where it is exposed to constant wind or there is too much vegetation. False triggers mostly occur on sunny, breezy days. When the wind moves the vegetation, the camera detects this and cannot distinguish it from a warm-blooded animal moving through the scene. Page 10

13 Appendix Ⅰ: Technical Specifications Picture Resolution Lens Flash Distance Display Screen Memory Card Video Resolution 12MP, 8MP, 5MP(CMOS) F/NO=3.0 FOV (Field of View)=52 45ft 1.5 LCD Up to 32GB 720P, VGA PIR Sensor Multi Zone PIR Sensitivity Adjustable (High/Normal/Low) Trigger Time 0.3s Operation Temp. -4 F F Trigger Interval Instant~60Min Time lapse 3Min~24Hours Photo Burst 1 6 Video Length 5 60s Power Supply 8 AA (1.5V) Stand-by Current < 0.25 ma (<6mAh/Day) Mounting Rope/Belt/Python lock Dimensions 4.72 x 3.74 x 2.55 Operation Humidity 5% - 90% Security authentication FCC, CE, RoHS Page 11

14 Appendix Ⅱ: Parts List Part Name Digital Camera Belt User Manual Quick Start Quantity One One One One WARRANTY FirstCam Outdoor Inc. provides 12 months of warranty service for this product against manufacturing defects or malfunctions. If your camera fails to function under normal use within 1 year, we will repair or replace the camera at no charge. The purchase receipt must be included from an authorized retailer to validate the warranty. Improper use of the camera resulting in damage is not covered by this warranty. FirstCam Outdoor Inc. can provide repair service after the warranty expiration. In this case the customer will be responsible for any charges on parts, labor and shipping costs. Please contact us for more details. Our complete warranty policy can be found on our website: Page 12