DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
|
|
- Alban Henry
- 6 years ago
- Views:
Transcription
1 - s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle, their carbide tipped measuring faces and their robust frame construction the modern micrometer from the Micromar series ensures maximum precision and a long working life. Our mechanical micrometers are extremely reliable and are easy to read due to the scales having a satin chrome, thus ensuring accuracy and user comfort. Our digital micrometers unite both the highly renowned mechanical precision from Mahr with most modern electronics. These digital micrometers offer simple operation with an error free reading as well as problem-free data of the determined parameters to an external evaluation instrument. Micromar 4 EW, the newest generation of waterproof digital micrometers ensures that even in the most difficult workshop conditions precise and reliable results are obtained. A speciality of Mahr is the micrometer with a dial comparator, with its built-in dial comparator, stationary anvil and constant measuring force they are particularly well suited for rapid measurements and highly precise serial measurements.
2 + s s Overview Micromar Micrometers 3-2 Micrometers Micromar 4 EW / 4 EXL / 4 EX 3-4 With Digital Display Micromar 4 A / 4 SH / 4 SC / 4 SD / 4 AG / 4 W 3-7 With Scales Micromar 4 F / 4 T / 4 TS 3-12 With Dial Comparator Micromar 4 AB / 4 AS / 4 AR / 4 AW / 4 SM 3-1 With Special Measuring Faces Micromar 4 Z 3-18 For the Measurement of Gears and Threads Accessories for Micrometers 3-21 Inside Micrometers Micromar 44 Cms / 44 F 3-22 Inside Micrometers with 2-Point Contact Micromar 44 A / 44 EX / 844 A 3-24 Self-Centering Inside Micrometers Depth Micrometer Micromar 4 T 3-28 With Scales Micrometer Heads Micromar 46 EX / 46 / 46H 3-29 With Digital Display or Scales Measuring Tools Sets B / C / D 3-31
3 - 3-2 Overview Micromar - Design Carbide tipped measuring faces Barrel scale Reference lines Thimble Spindle Ratchet Anvil Frame Locking device Heat insulated handle Micromar - Types of Micrometers Mahr - Micrometers are available with the following means of indication: a) Digital Micrometer b) Mechanical Micrometer c) Mechanical Micrometer with digital display with scale and dial with scale 4 EW 4 F 4 A
4 + 3-3 Overviews Micromar - Variations a) Micrometer b) Micrometer for inside dimensions 4 EW 44 EX c) Micrometer for depth measurement d) Micrometer Head 4 T 46 EX Function buttons of Digital Micometers Functions Type 4 EW 4 EXL 4 EX 44 EX 46 EX PR Enter a numerical value (Reference Setting) mm/inch Switch between mm/inch /ABS Set display to. mm/. for relative meas./ Set to a reference or preset value (PR) DATA Data transmission DATA
5 - 3-4 The new digital water proof Micrometer Micromar 4 EW. Even in the most difficult conditions precise and reliable results are obtained. Highly precise measuring system, Patent pending Ratchet is integrated in the thimble to enable one handed operation IP6 Water proof measuring system according to Protection class IP6 Rapid drive Code Initial IP International Protection First Numeral Second Numeral 6 Dust-tight Protected against powerful water jets Large display with 7. mm high digits Stainless steel, hardened spindle ABS Absolute-Function: Micrometer can be set in any position to. mm /. without the reference to the Preset value being lost Ergonomically formed and heat insulated steel handle Sturdy satin chrome steel frame Operating buttons are made from Ultradur, which has an excellent chemical resistance
6 + 3- Digital Micrometer 4 EW and 4 EXL 4 EW ABS 4 EXL IP6 Functions: (Zero setting the display for Relative measurement) ABS (Switching between Relative and Absolute measurement) mm/inch PR (Reference setting) Capacitive measuring system, life of battery approx. 2 years High contrast Liquid Crystal Display with 7. mm high digits Stain chrome steel frame, heat insulated Spindle and anvil are carbide tipped Spindle is made of stainless steel, hardened throughout and ground Ratchet is integrated in the thimble Rapid drive Case, battery, operating instructions Measuring range Resolution Error limit G Spindle Order no. thread pitch mm (inch) mm/inch µm mm 4 EW - 2 (-1 ).1/ EXL - 2 (-1 ).1/ , ø6, 118* ø2,9 Accessories Order no. Battery 3V, Type CR
7 - 3-6 Digital Micrometer 4 EX with Data Output ABS RS232C marconnect Measuring range Resolution Error limit Spindle Order no. G thread pitch mm (inch) mm/inch µm mm - 2 (-1 ).1/ (1-2 ).1/ (2-3 ).1/ (3-4 ).1/ b d Digimatic ce a ø6, 17, Functions: (Zero setting) ABS (Switching between Relative and Absolute measurement) mm/inch PRESET (enter a numerical value) DATA (Data transmission via connection cable) Capacitive measuring system, life of battery approx. 2 years Data output: Opto RS232C or alternatively Digimatic High contrast LCD with 7. mm high digits Lacquered steel frame, heat insulated Spindle and anvil are carbide tipped Spindle is made of stainless steel, hardened throughout and ground Ratchet is integrated in the thimble Rapid drive Case, battery, operating instructions PR mm/in /ABS Accessories Order no. Dimensions Battery 3V, Type CR Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr Data Connection Cable Digimatic (2 m), Flat plug 1-pin 16 EXd mm a b c d e - 2 mm / mm / mm / mm / Digital Micrometer Set 4 EXS Application Order no. Remarks range - 1 mm ( - 4 ) 419 Includes: wooden case, setting standards 2 mm, mm and 7 mm Accessories for Data Processing see Chapter 11
8 + 3-7 Micrometer 4 A Chrome plated steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Locking device Case, setting standard (from measuring range 2- mm / 1-2 ), operating instructions Measuring Readings Error Spindle Order no. range limit G thread pitch c 3, a 8* - 2 mm.1 mm 4 µm. mm mm.1 mm 4 µm. mm mm.1 mm µm. mm mm.1 mm µm. mm mm.1 mm 6 µm. mm mm.1 mm 6 µm. mm mm.1 mm 7 µm. mm mm.1 mm 7 µm. mm b 4 4 A ø6, Mahr 1 4 ø17, (* when scale is set at, ) Accessories Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7 Dimensions mm a b c - 2 mm / mm / mm / mm / mm / mm / mm / mm / Micrometer Sets 4 SA Application Order no. Remarks range - 1 mm 4134 Incl. wooden case, setting standards (4 Micrometers) 2 mm and 7 mm 1-2 mm Incl. wooden case, setting standards (4 Micrometers) 12 mm and 17 mm Incl. wooden case, setting standards (4 Micrometers) 1 and Incl. wooden case, setting standards (4 Micrometers) and 7
9 - 3-8 Micrometer 4 SH / SC Chrome plated steel frame Maximum stability Spindle and anvil made of hardened steel, carbide tipped or ceramic measuring faces (4 SC) Spindle is made of stainless steel, hardened throughout and ground Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Locking device Case (measuring range - 1 mm) Measuring Readings Error Spindle Order no. range limit G thread pitch 4 SH - 2 mm.1 mm 4 µm. mm mm.1 mm 4 µm. mm mm.1 mm µm. mm mm.1 mm µm. mm mm.1 mm 6 µm. mm mm.1 mm 6 µm. mm mm.1 mm 7 µm. mm mm.1 mm 7 µm. mm d b c e a ø7, Mahr 4 8* ø17, 4 SH (* when scale is set at, ) SC -2 mm.1 mm 4 µm. mm mm.1 mm 4 µm. mm Accessories Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7 Dimensions mm a b c d e - 2 mm / mm / mm / mm / mm mm mm mm Micrometer Sets 4 SSH Application Order no. Remarks range - 1 mm Incl. wooden case, setting (4 Micrometers) standards 2 mm and 7 mm 1-2 mm 4133 Incl. wooden case, setting (4 Micrometers) standards 12 mm and 17 mm Incl. wooden case, setting (4 Micrometers) standards 1 and 3
10 + 3-9 Micrometer 4 SD with extra large thimble Reading error is reduced due to the 1 mm measuring span per rotation of the thimble Chrome plated steel frame Maximum stability Spindle and anvil made of hardened steel, carbide tipped Spindle is made of stainless steel, hardened throughout and ground Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Locking device Case Measuring Readings Error Spindle Order no. range limit G thread pitch mm mm µm mm d b c e a ø7, 4 8* ø2 Mahr 4 SD (* when scale is set at, ) Dimensions Measured in mm a b c d e Accessories Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7
11 - 3-1 Micrometer 4 AG Lacquered steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome Heat insulators Ratchet is integrated in the thimble Locking device Case, setting standard Note: All Micrometers with measuring ranges between 4 mm to mm, the frame is made from a steel tube Measuring Readings Error limit Spindle Order no. range G thread pitch mm mm µm mm Dimensions a Measured in mm a b c d e d c e ø b ø18,7
12 Micrometer 4 W Lacquered steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome Heat insulators Ratchet is integrated in the thimble Exchangeable anvils Locking device Case, setting standards Note: All Micrometers with measuring ranges from 4 mm up to 1 mm, the frame is made from a steel tube Measuring Readings Error limit Spindle Order no. range G thread pitch mm mm µm mm a Dimensions Measured in mm a b 7 ø b ø24,
13 Micrometer with integrated Dial Comparator 4 F / FC Application For rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) Measurements of thickness and length Recommended for standard precision parts Chrome plated steel frame with heat insulators Maximum stability Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance Longer service life due to the ceramic measuring faces (4 FC) Measuring spindle made of stainless steel, hardened throughout and ground, lockable Scales with satin-chrome Constant measuring force Dial Comparator is integrated in frame Adjustable tolerance markers Case Measuring Retraction Measuring faces Measuring Order no. Remarks range Flatness Parallelism force 4 F -2 mm 1 mm.2 µm 1 µm 9 N mm 1 mm.2 µm 1 µm 9 N N N FC -2 mm 1 mm.2 µm 1 µm 9 N 412 Ceramic measuring faces 2- mm 1 mm.2 µm 1 µm 9 N 4121 Ceramic measuring faces Micrometer Dial Comparator Readings Error Spindle Error Meas. Spindle limit thread limit G e range thread G me pitch ( 879) pitch a e ø7, c 4 ø17,.1 mm 2 µm. mm 1 µm ±6 µm 1 µm ±.2. d Mahr 4 F/FC b Dimensions Accessories Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7 mm a* b c d e 4 F/FC -2 mm (-1 ) mm (1-2 ) * in zero position
14 Micrometer with Dial Comparator 4 T Application For rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) Measurements of thickness and length Recommended for standard precision parts Rugged steel frame, heat insulated and chrome plated (up to measuring range 1-1 mm) Maximum stability Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance Measuring spindle made of stainless steel, hardened throughout and ground, lockable Scales with satin-chrome Constant measuring force Heat insulators Dial Comparator 13, wooden case Measuring Retraction Measuring faces Measuring Order no. Order no. range Flatness Parallelism force with 13 + w/o 13-2 mm 1.2 mm.2 µm 2 µm 6. N mm 1.2 mm.2 µm 2 µm 6. N mm 1.2 mm.2 µm 2 µm 6. N mm 1.2 mm.2 µm 2 µm 7. N mm 1.2 mm.2 µm 2 µm 7. N Alternative indicating instruments are available on request Micrometer Dial Comparator + Readings Error Spindle Error Meas. Spindle limit thread limit G e range thread G me pitch ( 879) pitch.1 mm 2 µm. mm 1 µm ± µm 1 µm Dimensions Measured in mm a* b c d* e * in zero position e d a c b Mahr 7, 4 67 ø17, 4 T Accessories Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7
15 Precision Bench Micrometer 4 TS Application For rapid measurements of diameters of cylindrical parts (shafts, bolts and shanks) Measurements of thickness and length Recommended for standard precision parts Rugged steel frame, can be tilted up to 4 in relation to the sturdy base Retraction of the movable anvil and carbide-tipped measuring faces ensures maximum wear resistance Height-adjustable stop Constant measuring force Measuring spindle made of stainless steel, hardened throughout and ground, lockable Scales with satin-chrome Dial Comparator 13 Measuring Retraction Measuring faces Measuring Order no. Order no. Order no. range Flatness Parallelism force with 13* w/o 13 wooden case - mm 1.2 mm.2 µm 2 µm 6. N N 41493** * Alternative indicating instruments are available on request ** 13 Z 29, 26x1 ø7, 4 ø2,mm Indicating Thread Snap Gage 82 TS see page 9-17 Mahr 11 4TS - 87, 4 TS 14 x 8 Accessories Micrometer Dial Comparator 13/13Z Readings Error Spindle Error- Meas. Readings limit thread limit G e range G me pitch ( 879).1 mm 2 µm. mm 1 µm ± µm 1 µm ±.2. Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7
16 + 3-1 Micrometer 4 AB with reduced measuring faces For measuring recesses, grooves etc. Chrome plated steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Locking device Case, setting standard (from measuring range 2 - mm / 1-2 ), operating instructions Measuring Readings Error Spindle Order no. range limit G thread pitch - 2 mm.1 mm 4 µm. mm mm.1 mm 4 µm. mm mm.1 mm µm. mm mm.1 mm µm. mm b 4 c 4 AB 18, 8, ø3 a 8* ø6, ø17, (* when scale is set at, ) Mahr Dimensions a b c - 2 mm / mm / mm / mm / Micrometer 4 AS with sliding spindle and measuring spades For measuring narrow recesses, grooves etc. Chrome plated steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Case, setting standard (from measuring range 2 - mm / 1-2 ), operating instructions Measuring Readings Error Spindle Order no. range limit G thread pitch - 2 mm.1 mm 4 µm. mm mm.1 mm 4 µm. mm mm.1 mm µm. mm mm.1 mm µm. mm b 4 c 4 AS 1 7 ø6,8 a 8* Mahr ø ø17, (* when scale is set at, ) Dimensions a b c - 2 mm / mm / mm / mm /
17 Micrometer 4 AR with spherical anvils For measuring the thickness of a pipes wall etc. Chrome plated steel frame Spindle and anvil made of hardened steel, carbide tipped Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Locking device Case, setting standard (from measuring range 2 - mm / 1-2 ), operating instructions Measuring Readings Error Spindle Order no. range limit G thread pitch - 2 mm.1 mm 4 µm. mm mm.1 mm 4 µm. mm >ø12 b 4 c 4 AR 4 R6 a 8* ø6, ø17, Dimensions a b c Mahr - 2 mm / mm / (* when scale is set at, ) Micrometer 4 AW with sliding spindle and disc-type anvils For measuring soft materials such as felt, rubber, cardboard etc. Chrome plated steel frame Spindle and anvil made of hardened steel Scales with satin-chrome Heat insulators Rapid drive with integrated ratchet Case, setting standard (from measuring range 2 - mm / 1-2 ), operating instructions Measuring Readings Error Parallelism Flat- Spindle Order no range limit G ness thread pitch 31 8* - 2 mm.1 mm 8 µm µm 2 µm. mm , , 4 4 AW ø ø17, Mahr (* when scale is set at, )
18 Precision Micrometer 4 SM with disc-type anvils Chrome plated steel frame Maximum stability Spindle is hardened throughout and ground Disc-type anvils are hardened and lapped Scale have a satin chrome Heat insulators Rapid drive with integrated ratchet Locking device Case (measuring range - 9 mm) Wk Application For measurements of Tooth spans W k as of module.8 as indirect determination of tooth thickness on spur gears with straight and helical teeth Shoulders on shafts Undercut dimensions Registers Soft materials such as rubber, cardboard, felt, etc. Measuring Readings Error Spindle Measuring faces Order no. range limit G thread pitch Flatness Parallelism mm mm µm mm µm µm Dimensions Measured in mm a b c d e f c a e ø17, d b f,8 Mahr 4 4 SM Accessories Stand, setting standards, etc. please refer to page 3-21 Test Set for Micrometers 419 C, please refer to page 13-7
19 Thread Micrometer 4 Z For measuring pitch, root and outside diameters Rugged steel frame, heat insulated Spindle is hardened throughout, ground and is also provided which a locking device Adjustable anvil Both the spindle and anvil have a mounting bore for accommodating interchangeable anvils Flat end surface of the anvil shank rests on a hardened steel ball which is at the bottom of the mounting bore Scales have a satin-chrome Readings.1 mm Mounting bores for anvils 3. mm Spindle thread pitch. mm Thimble dia. 17. mm Accuracy Measuring Error Order no. Order no. range limit G me wooden case mm a 1 1 b c Z - 2* 4 µm µm µm µm µm µm µm µm Mahr a = Regulating range ±. mm b = V-anvil c = Tapered anvil * Setting only with Thread Setting Plug Gages 71 E, when the interchangeable anvils span over several leads Accessories Setting Standards 43 Z For setting Thread Micrometers 4 Z. With point on one side and V-groove on the other, both matching pitch angle of thread to be checked. One setting standard is sufficient for two adjacent frame sizes. 43 Z Length Accuracy Thread angle 6 Thread angle mm ± µm Order no. Order no
20 Interchangeable Anvils for Thread Micrometer 4 Z For pitch, root and outside diameters. Hardened, wear-resistant special steel. With cylindrical mounting shank and retainer ring which ensures locking while permitting rotation in bore of spindle and anvil. For pitch diameters Set consists of V-anvil and tapered anvil. For pitch range mm V-anvil covers 3 thread leads. Therefore setting with Thread Setting Plug Gages 71 E, as opposed to Setting Standards 43 Z for other applications. Metric thread (6 ) Whitworth thread ( ) American UST thread (6 ) Pitch V-anvil Tapered Pitch V-anvil Tapered Pitch V-anvil Tapered anvil range anvil range anvil mm Order no. Order no. tpi Order no. Order no. tpi Order no. Order no , ø3, For pitch diameters Set consists of V-anvil and tapered anvil. Shank length 1. mm Trapezoid threads Pitch V-anvil Tapered anvil mm Order no. Order no For root diameters Set consists of V-anvil and pointed anvil. Each pitch requires a separate V-anvil. Pointed anvil can be used for several pitches. Metric thread (6 ) Whitworth thread ( ) American UST thread (6 ) Pitch V-anvil Pointed Pitch V-anvil Pointed anvil range anvil mm Order no. Order no. tpi Order no. Order no For outside diameter Pair of Flat Anvils 4 Za with flat measuring faces Made of hardened steel Order no Carbide tipped Order no ø7, 1, ø3,
21 - 3-2 Interchangeable Anvils for Thread Micrometer 4 Z Ball Anvils For measuring gears and for special applications. Carbide ball. With cylindrical mounting shank and retainer ring. For mounting into mounting bores of Thread Micrometers 4 Z and 82. H ø3, Shank dia. 3. mm Shank length 1. mm Accuracy of ball dia. ± 2 µm ød 1, dia. d H Order no. mm mm dia. d H Order no. mm mm dia. d H Order no. mm mm dia. d H Order no. mm mm Further sizes are available on request (material: steel) Roller Blades For measuring gears and for special applications. The measuring roller is made of carbide. To be mounted in the mounting bores of Thread Micrometers 4 Z and 82. H Shank dia. 3. mm Shank length 1. mm Accuracy of ball dia. ± 2 µm d B dia. d Dimension H Dimension B Order no. mm mm dia mm Further sizes are available on request (material: steel)
22 Accessories for Micrometers 41 H Stand 41 H For mounting a micrometer Enables the user to use both hands to operate the micrometer and/or to insert a work piece Sturdy, heavy-duty base, hammer-dimple enamel Clamping jaws are rubber lined to protect micrometer, the clamping jaws can be tilted Both the clamping jaws and hinge are fixed in place with one screw Dimensions (D x W x H) Order no. 13 x 1 x 9 mm 418 Ball shaped Anvil Attachment 4 k For measuring the thickness, for example: of pipe walls Slips over every anvil or the spindle with a dia. 7. mm Carbide ball, Ball dia. ±.2 mm Order no ø9, ø9 3, 7,8 6, 4 k Setting Standards 43 A For testing the basic setting of a micrometer Heat insulated handle Manufacturing tolerance js 2 Mahr Thread Pin Gage 426 M in holder For determining the pitch diameter of external threads according to the three wire method 426 M Length mm Order no Length inch Order no a/2 d Slips over every anvil or the spindle Pin gages are hardened and lapped dp Wooden Cases for Micrometer d 2 M For measuring ranges over 1 mm the following wooden cases are available: Pin gage dia. Manufacturing tol. Mounting hole mm ±. µm ø 7. mm* *ø6.3/6./8 mm are available on request Order no. and further details see page SH 4 SM Order no. Meas. range mm
23 Inside Micrometer 44 Cms Set Rigid, lightweight tubular construction Spindle is hardened throughout and ground Locking lever Scales with satin-chrome Carbide tipped spherical measuring faces Interchangeable extensions 44 Cv with cylindrical gage rods that are springmounted in protective sleeves; for the extension of the measuring range Protection sleeves have a satin chrome Span of error Basic unit in combination with any of the extensions 4 µm + 1 x 1-6 x l (l = length of the combination mm) Catalog no. Measuring Meas. head 44 Cm Extensions 44 Cv Order no. Remarks range Readings Spindle length thread pitch in mm mm mm mm 44 Cms Incl. case 44 Cms / / Incl. case 44 Cms3 1-2 / / 1 / Incl. case 44 Cms4 1-9* 2 / / 1 / 2 / Incl. case * up to 2 mm can be achieved with 2 extensions: 44 Cv 8 mm Accessories Individual Extensions 44 Cv Length a dia. b Order no. mm mm Inside Micrometer 44 Cm Measuring Reading Spindle Order no. range thread pitch mm mm mm Case for Inside Micrometer 44 Cm and extension sets Cvs1 or Cvs Wooden case for 2 extensions 44Cv 8 mm
24 Inside Micrometer 44 F Rigid, lightweight tubular construction Spindle is hardened throughout and ground Measuring faces spherically lapped, one measuring face adjustable Scales with satin-chrome From 1-12 mm meas. range, heat insulators and locking device Case Measuring Readings Error Spindle Order no. range limit G thread pitch mm mm µm mm Dimensions b Meas. range in mm a b a 1 4 a Accessories Page 3 E Ring Gage 3 E for testing the 13-2 basic setting Special wear resistant steel, hardened and lapped Dimensions according to 22 C Manufacturing tolerance in accordance to 22 Uncertainty of the engraved actual dimension 1/2 IT1
25 Self-Centering Inside Micrometer 44 A Application For measuring: through holes blind holes centering shoulders Scales with satin-chrome Spindle is hardened throughout and ground Rapid drive with integrated ratchet Self-centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 12 Anvils from 12. mm are carbide tipped From 12. mm the anvils can be used to measure to the bottom of a bore From 4 mm all measuring heads are made from aluminum to reduce weight Case Measuring range Readings Error limit G * Order no. mm mm µm * Over the full length of the anvils Self-Centering Inside Micrometer Sets 44 AS Measuring Number Ring Order no. range of gages mm Micrometers ø mm / / / / Case and ring gage (includes a traceable calibration certificate for the ring gage)
26 + 3-2 Digital Self-Centering Inside Micrometer 44 EX IP2 RS232C marconnect Digimatic Application For measuring: through holes blind holes centering shoulders Functions: (Setting the display to zero for Relative measurement) ABS (Switching between Relative and Absolute measurement) mm/inch PR (Reference setting) Basic Instrument consists of: Basic Unit 44 EXg and Measuring Head 44 Ak Threaded connection for changing the measuring heads Measuring range Readings Error limit G* Order no. mm (inch) mm/inch µm 6-8 ( ).1/ ( ).1/ (.4 -. ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ ( ).1/ Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 12 Anvils from 12. mm are carbide tipped From 12. mm the anvils can be used to measure to the bottom of a bore From 4 mm all measuring heads are made from aluminum to reduce weight Case * Over the full length of the anvils Digital Self-Centering Inside Micrometer Sets 44 EXS Measuring range Number of Ring Order no.* measuring gages mm (inch) heads 44 Ak ø mm (.2 -. ) 3 8 / (. - 1 ) 3 16 / (1-2 ) 4 3 / (2-4 ) 4 6 / Basic Unit 44 EXg, Measuring Heads 44 Ak, case and ring gages (includes a traceable calibration certificate for the ring gage)
27 Self-Centering Measuring Pistol 844 A Basic Instrument consists of: 844 Ag and Measuring Head 44 Ak Application For measuring: through holes blind holes centering shoulders Measuring range Error limit G * Order no.** mm (inch) µm / inch 6-8 ( ) 3 / ( ) 3 / (.4 -. ) 3 / ( ) 3 / ( ) 3 / (.77-1 ) 3 / ( ) 3 / ( ) 3 / ( ) 3 / ( ) 3 / ( ) 4 / ( ) 4 / ( ) 4 / ( ) 4 / ( ) / ( ) / ( ) 6 / ( ) 6 / Threaded connection for changing the measuring heads Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 12 Anvils from 12. mm are carbide tipped From 12. mm the anvils can be used to measure to the bottom of a bore From 4 mm all measuring heads are made from aluminum to reduce weight Case The following indicating instruments are recommended: Indicating instr. Order no. Millitast Millitast Millitast XLI-4 XLI-4 Self-Centering Measuring Pistol Set 844 AS Measuring range Number of Ring Order no. Order measuring Gages with Digital no.** mm (inch) heads ø mm Indicator (.2 -. ) 3 8 / (. - 1 ) 3 16 / (1-2 ) 4 3 / (2-4 ) 4 6 / Basic Instrument 844 Ag, Measuring Heads 44 Ak, case and ring gages (includes a traceable calibration certificate for the ring gage) * Indicator is not taken into consideration, over the full length of the anvils ** Excludes indicator
28 Accessories for 44 A, 44 EX, 844 A Measuring Heads 44 Ak Self-Centering measuring head consists of 3 laterally positioned anvils, each are offset at intervals of 12 Anvils from 12. mm are carbide tipped As of 12. mm the anvils can be used to measure to the bottom of a bore From 4 mm all measuring heads are made from aluminum to reduce weight Measuring range mm (inch) Order no. 6-8 ( ) ( ) (.4 -. ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Meas. range mm Meas. range mm Ring Gage 44 Ae Can be used for 2 consecutive measuring ranges Manufacturing tolerance in accordance to 22C Includes a traceable calibration certificate dia. mm Order no. dia. mm Order no Basic Unit 44 EXg Threaded connection for changing the measuring heads. Measuring range mm (inch) Basic Unit Measuring Pistol 844 Ag Order no (.2-. ) ( ) ( ) ( ) Threaded connection for changing the measuring heads. Any indicating instrument with an 8 mm mounting shank can be used. d d Measuring range mm (inch) Order no. a c b Measuring range mm a b c d c b 6-1 (.2-4. ) ( ) ( ) Depth Extension Rod 44 Av Measuring range Length a dia. b Order no. mm (inch) mm mm 6-1 ( ) ( ) (.77-1 ) (1-7.9 ) b a 44 Av
29 Depth Micrometer 4 T Application Depth measurement Measuring the space between grooves and groove widths (in conjunction with a Disc anvil 4 Tm) Measuring spindle is hardened throughout and ground Hardened chrome plated cross beam, the contact surface is lapped Hardened anvil When using the interchangeable extensions re-calibrating the depth micrometer is not necessary Scales with satin-chrome Extensions 2 mm and mm, case Total Range of Readings Spindle Error limit Extensions Length tolerance Order no. measuring micrometer thread with of range pitch standardanvil extensions mm mm mm mm µm mm µm µm 2/ ± 1. µm Standard depth measurements With a standard anvil, if necessary with an extension Measuring the space between grooves and the widths of a groove With disc anvil 4 Tm, if necessary with an extension Dimension A: Can be direct read of the thimble Dimension B: The reading plus 1. mm (thickness of the disc anvil) Dimension C: Dimension B minus Dimension A 1, A C B 1 x 16 Accessories Order no. Disc anvil 4 Tm for groove spacing and groove widths Extension 4 Tv Length L Length tolerance M3 1 4 Tm 2 mm ± 1. µm 4181 mm ± 1. µm mm ± 1. µm 4183 ø9
30 Digital Micrometer Head 46 EX marconnect RS232C Digimatic Functions: (Zero setting) ABS (Switching between Relative and Absolute measurement) mm/inch PRESET (enter a numerical value) DATA (Data transmission via connection cable) Patented capacitive measuring system with an energy saving function, life of the battery approx. 2 years Ratchet with integrated coupler Case, Adapter dia. 12 mm to dia. 16 mm, end cap (in case ratchet stop is not required) Measuring Readings Error limit G me Measuring Mounting shaft Order no. range face mm (inch) mm/inch µm mm -2 (-1 ).1/. 4 flat (-1 ).1/. 4 flat 12* (-1 ).1/. 4 spherical (-1 ).1/. 4 spherical 12* * with locking nut 27 16,6 1, 16 ø6, ø12 R4 ø12 ø16 16 Accessories Order no. R4 M 12 1 ø16 16 Battery 3V, Type CR Data Connection Cable Opto RS232C (2 m), with SUB-D jack 9-pin 16 EXr Data Connection Cable Digimatic (2 m), Flat plug1-pin 16 EXd M 12 1 Accessories for Data Processing see Chapter 11
31 - 3-3 Micrometer Head 46 Spindle is made of stainless steel, hardened throughout and ground Scales with satin-chrome Measuring range Readings Error limit Spindle Spindle dia. Order no. G me thread pitch mm mm µm mm mm * H - 2** * with locking nut ** with ratchet, carbide tipped ø3, ø6 -,8 1 4 ø8,6 ø9, Meas. range -6. mm , ø 17, ø9, h6 9, 2 2, ø14,2 4 26, 3, ø1 ø Meas. range -13 mm ø6,3 ø1 h6 4 ø17, ø1 ø18, Meas. range -2 mm , 2,2 46 3, ø6,3 27 ø1 h6 1 2, 2,2 4 ø17, 46 3, ø1 ø18, Meas. range -2 mm with locking nut ø7, 27 ø12 h6 16 2, 1,2 4 ø17, ø12 ø18, 4184 Meas. range -2 mm carbide tipped ø7, ø12 h6 4 ø17, ø1 ø18, Meas. range - mm , 1,2 76 4,3
32 Measuring Tools Set B B C consists of Order no. Order no. 16 FN 4 A Knife edge square Steel rule 1 mm - 2 mm x 7 1 mm Metric Inch x x x x x x x x x Measuring Tools Set C consists of Order no. Order no. 16 EX* 4 A Knife edge square Steel rule 1 mm - 2 mm x 7 1 mm Metric Inch x x x x x x x x x * with round depth rod, without data output Measuring Tools Set D consists of Order no. Remarks 16 EX* 4 EX 16 U 4 A 6 rule mm/inch mm/inch ths, 16 ths, 32 nds, 64 ths x x x Mechanical x x x Digital * 1 mm / 6 with round depth rod, without data output
Does everything rotate around precision? no problem with Micromar.
Does everything rotate around precision? no problem with Micromar. The latest information on MICROMAR products can be found on our website: www.mahr.com, WebCode 2 Micrometers belong alongside calipers
More informationMicromar. a new generation with the reference-system
- 2 Micromar. micrometers Micromar. a new generation with the reference-system WATERPROOF MICROMETERS with this new generation of reference micrometers, mahr once again sets a new standard in the micrometer
More informationMetrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationDigital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
More informationMarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationNew Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
More informationDO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS.
DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. Regardless of whether gears, s, cones or grooves are to be measured; the versatility of Multimar Universal Measuring Instruments
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationMULTIMAR I UNIVERSAL MEASURING INSTRUMENTS
- + MULTIMAR I UNIVERSAL MEASURING INSTRUMENTS DO YOU HAVE DIVERSE MEASURING TASKS? MULTIMAR MASTERS THEM WITH FLYING COLORS. The latest information on MULTIMAR products can be found on our website: www.mahr.de/en/home,
More information7 Micrometers. 47 Calipers. 77 Depth & Height Gauges. 89 Indicator & Dial Gauges. 131 Bore Gauges. 137 Other Gauges. 161 Gauges
CATALOG NO. AS7 I N D E X 7 Micrometers 7 Calipers 77 Depth & Height Gauges 89 Indicator & Dial Gauges Bore Gauges 7 Other Gauges Gauges 8 Testers & Optical Instrument A S I M E T O C A T A L O G 7 Precision
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
More informationMAHRLIGHTS. From j 215,-- SPRING PROMOTION. MarCator. Digital indicators with System PROMOTION PRICES VALID UNTIL 31 MAY 2012
+ MAHRLIGHTS MarCator. Digital indicators with System From j 215,-- SPRING PROMOTION PROMOTION PRICES VALID UNTIL 31 MAY 2012 2 Mahrlights. Spring Promotion MarCal. Digital Caliper 16 EWR with Reference
More informationKvalitet skydelære inklusiv DKD certifikat! 700,00 kr
- + M A H R L I G H T S Tilbud gældende indtil 31. december 2009 Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr MarCal 16 EX med rund eller rektangulær dybdemål til vores tilbudspris 565,00 kr,
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - The complete support for your inspection. Martool The latest information on MARTool products can be found on our website: www.mahr.com, WebCode 10436-5062 MarTool measuring and inspection
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationSTAR TOOL SUPPLY / GRAND TOOL SUPPLY
SERIES 207: MICROMETER DEPTH GAGES STARRETT SERIES 440, 445: Length No. of Order Range of Base Rods No. 0-4 2-1/2 4 5001502 0-4 4 4 5001503 0-6 4 6 5001504 The depths of holes, slots, shoulders, and projections
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationS_Cal PRO. Professionnal Caliper DESCRIPTION
HND TOOLS In 1981, Sylvac launched the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Today, Sylvac remains
More informationU. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
More informationDO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR.
- DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. Mahr offers you the complete product program in order for you to obtain the most reliable solution for all your measuring tasks. Whether it
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationMetrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
More informationDigimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More informationHOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.
Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,
More informationELECTRONIC CALIPER. Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Code
ELECTRONIC CALIPER Code 1114-150 1114-200 1114-300 Range 0-150mm/0-6" 0-200mm/0-8" 0-300mm/0-12" Zinc alloy case Resolution: 0.01mm/0.0005" Buttons: zero, power on/off, inch/mm Battery SR44, with one spare
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationINTERAPID Depth Feet. Brown & Sharpe CENTER FINDER. Model with a flat measuring face. Model with a prismatic measuring face H-16
INTERAPID Depth Feet Model with a flat measuring face ø28 ø8 Finish lapped measuring faces. Clamp with lock for mounting a dial gauge or an electronic probe Supplied ø6.5 without indicator 80 Suited carrying
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationHeightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
More informationInside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
More informationi-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54
i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm
More information500 mm INTERNAL MEASURING INSTRUMENTS
INTERNAL MEASURING INSTRUMENTS SYLVAC offers a large range of internal measuring instruments made of interchangeable or points mechanical heads and electronic units with digital display, integrated in
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr MARSHAFT I MANUAL SHAFT MEASURING UNITS V02-May 2009 MarShaft MAN Data Sheets 1 MarShaft MAN Shaft Measuring Unit Advantages at first sight A measuring instrument for multiple measuring
More informationALL-INCLUSIVE, EASY TO USE
THE ESSENTIAL METROLOGY CATALOGUE 16/17 Partners in Precision Micrometers INNOVATIVE NEW PRODUCTS THROUGHOUT THIS ALL-INCLUSIVE, EASY TO USE REFERENCE INTRODUCTION ISO 9001:2015 Quality Guaranteed In 2016
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationAuxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
More informationDigimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages. New Products. SuperCaliper ABSOLUTE. Coolant Proof Caliper ABSOLUTE
Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages New Products SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper INDEX Caliper
More informationDIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
More information102 Precision Measurement
102 Precision Measurement 4KU90 4KU86 4KU87 Outside Micrometers Quickly and easily adjusts to zero Features microfine graduations on satin chrome finish and carbide-tipped measuring faces. Ratchet stop
More informationBEST DEALS. TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! HexagonMI.com TESAtechnology.
BEST DEALS TESA Brown & Sharpe measurement tools and solutions: perfection down to the detail for every user! Valid until 04.30.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com
More informationMW-2012E PRODUCT CATALOGUE 12/13. Partners in Precision INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE
MW-2012E PRODUCT CATALOGUE 12/13 INNOVATIVE NEW PRODUCTS IN EVERY SECTION OF THIS ALL-INCLUSIVE, EASY TO USE REFERENCE MOORE & WRIGHT A Brief History... Founded in 1906 by innovative young engineer, Frank
More informationSPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationBEST DEALS. TESA Brown & Sharpe quality measuring instruments at the best prices. HexagonMI.com TESAtechnology.com
BEST DEALS TESA quality measuring instruments at the best prices. Valid until 08.31.2018 s exclude VAT Version B&S - EN - USD HexagonMI.com TESAtechnology.com TESA-HITE 400/700 Robust and reliable. Ideally
More informationYOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE.
- and Touch Probes YOUR MEASURING TASKS ARE SENSITIVE. MARTEST IS HIGHLY SENSITIVE. Since 1936 Mahr is one of the leading global producers of test indicators, we have achieved this with the continuous
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Bulletin No. 1966 Digital indicators offer dramatically improved readability, usability and functionality
More informationNEW. Visit our NEW Website Over 100. Items! INDICATORS
Over 100 NEW Items! INDICATORS Visit our NEW Website www.fowlerprecision.com Tool-A-Thon 15.2 Highlightes Calipers up to 33% off, page 14 Outside Micrometer Sets 20% off, page 6 Fowler-Sylvac Indicators
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
More informationFor Sales, Service & Spares contact:
For Sales, Service & Spares contact: Michael Francis House 3 Trimbush Way Market Harborough Leicestershire LE16 7XY Registered in England No. 5562754 VAT No. 780 4974 94 Precision, Quality, Innovation
More informationCalipers. B-1
alipers www.tesatechnology.com -1 alipers THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation,
More informationMarTest. Test Indicators
- - Overview Order on our SECURE website: - Versions Measuring Dial style Readings Styli Order no. Order no. range with Kit* Standard S ±." --.". mm 6 S ±." --.". mm 6 SG ±." --.". mm 7 SGI ±." (±. mm)
More informationMarTest. Test Indicators
- - Overview - Versions Standard Measuring Dial style Readings Styli Order no. Order no. range with Kit* S ±. mm --. mm. mm SG ±. mm --. mm. mm 7 SA ±. mm --. mm. mm SGA ±. mm --. mm. mm S ±." --.". mm
More informationDepth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type
epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force.
More information0-1 /0-25mm Optional Accessories MSLP SALE 05CZA662 SPC cable (40 / 1m) $ $ CZA663 SPC cable (80 / 2m) $ $133.
Winter 2012 Prices effective from Jan. 3 to Apr. 30, 2012 New Year Sale Featuring Mitutoyo Precision Measuring Tools & Instruments Cable #02AZD790B Coolant Proof Micrometers - Ratchet Stop Range Order
More informationSummer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise
S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i
More informationMICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
More informationDial gauge testing stand M3
Dial gauge testing stand M3 DESCRIPTION probes (like P10 and P50) (P10 calibrated on channel 1 and P50 calibrated on channel 2) Fast fixing by knob-pulley Delivered with inspection software SYCOPRO II
More informationHeavy duty frame Extra large display
Over 50 NEW items! Bluetooth Ultra-Cal VI Electronic Calipers 54-100-167-0 NOW available with ISO Cert. IP67 rated Available with or without Bluetooth Heavy duty frame Extra large display Order No. Description
More informationDial gauges Electronic and Analogue
Dial gauges Electronic and Analogue 1F-1 Dial gauges Electronic and Analogue EASY-TO-USE AND VERSATILE For more than 50 years we have been producing and distributing a wide range of easy-to-use and versatile
More informationCalipers. B-1
alipers -1 L I P E R S THE ESSENTILS alipers are the most popular length measuring instruments used worldwide. Owing to their simple construction, ease of handling and quick operation, they are a favourite
More informationHEIGHT GAGES YES. Frontal Squareness Deviation "/0.005mm "/.008mm "/0.011mm Air Cushion
Over 80 NEW items! HEIGHT GAGES Fowler-Trimos V3, V4 & V5 Electronic Height Gages The Fowler-Trimos V3, V4 and V5 vertical measuring instruments have been developed for the most difficult workshop environments.
More informationDepth Gage A standard measuring tool of industry
epth Gage standard measuring tool of industry epth Micrometer SERIES 329, 129 Interchangeable Rod Type This type uses interchangeable rods to enable wide-range measurement. Order Nos. 329-250-30, 329-251-30,
More informationHorizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium
410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Catalog No. E40-54 Digital indicators offer dramatically improved readability, usability and functionality
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from July 1, 2016 to September 30, 2016 *Manufacturer s Part Number Shown Special Mitutoyo Summer Savings HUGE SAVINGS! LIMITED TIME ONLY! Prices Subject to Change Without Notice & Stock Availability.
More informationBIGGEST TOOL-A-THON EVER!
BIGGEST TOOL-A-THON EVER! 8 NEW Pages! Over 50 NEW Products! Sale ends December 31, 2012 These Gages Read in: Poly-Cal Electronic Caliper Range 6"/150mm Polycarbonate Frame Large easy-to-read display.
More informationOUTSIDE MICROMETERS NEW. Electronic Micrometers No. 795 Series (with output) 0-1 (0-25mm) No. 796 Series (without output) 0-1 (0-25mm)
NEW 6 OUTSIDE Electronic Micrometers No. 795 Series (with output) 0-1 (0-25mm) No. 796 Series (without output) 0-1 (0-25mm) Starrett 795 and 796 Electronic Micrometers provide an IP67 level of protection
More informationTESA UPD Gauge Block Comparator with a 25 mm Measuring Span
TESA UPD Gauge Block Comparator with a 25 mm Measuring Span Direct measurement of gauge blocks with a variation in nominal length of up to 25 mm or 1 in. Allows the number of required reference gauge blocks
More informationBATHS SHAKERS STIRRERS HOTPLATES MECHANICAL MEASUREMENT HEATING MANTLES MECHANICAL MEASUREMENT
BATHS SHAKERS STIRRERS HOTPLATES MECHANICAL MEASUREMENT HEATING MANTLES MECHANICAL MEASUREMENT Universal Digital Calipers CALIPERS MT-1101060 MT-1101060, Universal Digital Calipers Universal Digital Calipers
More informationVisit us at Booth No September 10 th - 15 th. Enter For A Chance ToWIN! Register at
Visit us at Booth No. 135616 September 10 th - 15 th Enter For A Chance ToWIN! Register at www.fowlerprecision.com/win Fowler-Bowers BLUETOOTH XTH3 Holematic Pistol Grip Sets FREE TABLET! with Complete
More informationi-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
More informationCalibration House, 71, Tarani Colony, Near Amir Vila, A. B. Road, Dewas, Madhya Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 8 I. DIMENSION 1. Calipers (Vernier/Dial/Digital) $ L.C.: 5 μm Φ 0 to 1000 mm 13.0 µm Using Caliper Checker, Gauge Block & Length Bar 2. Height Gauges $ (Vernier/Dial/Digital)
More informationMarTest. Test Indicators
. Test Indicators The New Standard... Comprehensive product range with a wide selection of accessories Highly refined and precise mechanism Water-resistant dial face for use in the workshop Excellent quality
More informationS_Cal EVO. Professionnal Caliper DESCRIPTION
Professionnal Caliper DESCRIPTION S_Cal EVO Integrated data transmission New extra-large display Prograable button according to your needs Water protected for heavy-duty work with coolants and lubricants,
More informationPromo Division Ave S Grand Rapids, MI Fax: Micrometers.
1547 Division Ave S Grand Rapids, MI 49507 800-968-8665 Fax: 616-241-1811 www.nemic.net tools@nemic.net Precision, Quality, Innovation Promo 2013.2 Precision Tool Promotion Micrometers Slide Calipers Height
More informationElectronic indicators, Dial Gauges, Precision Indicators
Electronic indicators, Dial Gauges, Precision Indicators F-1 E LECTRONIC I NDICATORS AND D IAL G AUGES EASY-TO-USE AND VERSATILE As manufacturer of a full range of precision dial gauges for more than 50
More informationMAHRLIGHTS NEW! only j 219,-- As starter set with wireless receiver and software. MarCal. Digital Caliper 16 EWRi with integrated wireless interface
- + MAHRLIGHTS NEW! PROMOTION PRICES VALID UNTIL 31 DECEMBER 2013 MarCal. Digital Caliper 16 EWRi with integrated wireless interface As starter set with wireless receiver and software only j 219,-- - 2
More informationExcel Calibration Private Limited, No. 101, Legend Constructions, No /101, Barkathpura, Hyderabad, Telangana
Last Amended on 10.03.2016 Page 1 of 5 I. DINENSION 1. GAUGE BLOCKS $ (Grade 0, I & II) 0.5 mm to 10 mm 0.4 µm Using Gauge Block 10 mm to 25 mm 0.6 µm Comparator & Slip Gauges 25 mm to 50 mm 0.7 µm 50
More informationData Sheet: LDS 1367 Date:
Product: Electronic Digital Measuring Set Page 1 of 5 Digital Caliper and Electronic Micrometer Set Set contains: 1 x Electronic Caliper: 150mm/6 1 x Electronic Micrometer: 0-25/0-1 mm Housed in a fitted
More informationPrecision Measuring Equipment and Industrial Supplies since 1924.
J.W. DONCHIN CO. www.jwdonchin.com Precision Measuring Equipment and Industrial Supplies since 1924. 4841 W. Chicago Ave. - Chicago, IL 60651 Phone: 773-261-2182 Fax: 773-261-2867 sales@jwdonchin.com J.W.
More informationVernier Caliper VERNIER CALIPERS. Basic Model. 4 Way measurement. Under 125mm without step measurement. Upper 300mm/12 without depth measurement.
Vernier Caliper VERNIER CALIPERS Basic Model 4 Way measurement. Under 25mm without step measurement. Upper 300mm/2 without depth measurement. Made of Carbon or Stainless. Metric & Inch 0-/6.02mm/.00 0-200mm/8.02mm/.00
More informationDial Gauge KM 4/5 T. of our Precision Dial Gauge series offer reliability, The well thought-out design, accurate components and robust construction
Dial Gauge M 2 T Dial Gauge M 2/30 T Range 30 mm Accuracy according to Käfer works standard Dial Gauge KM 4/5 T Range 5 mm Bezel-Ø 40 mm Precision Dial Gauges The well thought-out design, accurate components
More informationDIAL GAUGES. K-1
DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output
More informationJSR GROUP. Profile Projector. PJ-A3000 SERIES 302 Profile Projectors
PJ-A3000 SERIES 302 s The PJ-A3000 Series profile projectors are medium-size models that feature excellent versatility and easy operation. Easy-to-read digital XY counter is located near the projection
More information