A q!2 w!7!9!1 t y!4 u o

Transcription

1 A!1!2 e r!7!8!9 u o

2 B C E D

3 F G H I

4 Table of Contents MB-D10 Multi-Poer Battery Pack User s Manual Safety Precautions... 2 Precautions for Use... 2 Introduction... 4 The MB-D10 and Accessories... 4 The MB-D10 and Supplied Accessories... 4 The BL-3 Battery-Chamber Cover (Available Separately)... 4 Parts of the MB-D The MB-D10 Shutter-Release Button, Multi Selector, Command Dials, and AF-ON Button... 5 The MB-D10 Control Lock... 5 Using the Battery Pack... 6 Attaching the Battery Pack... 6 Removing the Battery Pack... 6 Inserting Batteries... 7 Removing Batteries... 9 Specifications

5 Safety Precautions To ensure proper operation, read this manual thoroughly before using this product. After reading, be sure to keep it here it can be seen by all those ho use the product. Precautions for Use The MB-D10 is for use ith compatible cameras only. Do not use ith batteries and battery holders not recommended in this manual. The MB-D10 can not be used ith rechargeable EN-EL3a/EN-EL3 Li-ion batteries. The MB-D10 can be used ith the MS-40 AA battery holder for the MB-40 multi-poer battery pack, but performance ill be impaired and the number of photographs that can be taken ith a single set of batteries ill drop. To prevent electrical shorts caused by metal objects touching the poer terminals, replace the contact cap hen the MB-D10 is not in use. When a battery holder or the optional BL-3 battery-chamber cover is removed from the MB-D10, remove the batteries or place the holder or cover in the holder case to prevent electrical shorts caused by contact ith other metal objects. The memory card access lamp may light up hen the MB-D10 is attached or removed from the camera, but this is not malfunction. Should you notice smoke or an unusual smell or noise from the battery pack, discontinue use immediately. After removing the batteries, take the device to the retailer or a Nikon-authorized service representative for inspection. The MB-D10 is not euipped ith a poer sitch. Use the camera poer sitch to turn the poer on or off. 2

6 Notice for Customers in the U.S.A. Federal Communications Commission (FCC) Radio Freuency Interference Statement This euipment has been tested and found to com ply ith the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This euip ment gen er ates, uses, and can radiate radio fre uen cy en er gy and, if not in stalled and used in ac cor dance ith the instructions, may cause harmful in ter fer ence to radio com mu ni c- ations. Ho ev er, there is no guar an tee that in ter - ference ill not occur in a particular installation. If this euip ment does cause harm ful in ter fer ence to radio or tele vi sion re cep tion, hich can be de ter - mined by turn ing the euipment off and on, the user is en cour aged to try to correct the in ter fer ence by one or more of the fol lo ing mea sures: Reorient or relocate the receiving an ten na. Increase the separation beteen the euip ment and re ceiv er. Connect the euipment to an outlet on a circuit differ ent from that to hich the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. CAUTION Modifications: The FCC reuires the user to be notified that any changes or mod i fi ca tions made to this device that are not ex press ly ap proved by Nikon Corporation may void the user s au thor i ty to operate the euipment. Nikon Inc., 1300 Walt Whitman Road, Melville, Ne York , U.S.A. Tel.: Notice for Customers in Canada CAUTION This Class B digital apparatus complies ith Canadian ICES-003. ATTENTION Cet appareil numériue de la classe B est conforme à la norme NMB-003 du Can a da. 3

7 Introduction Thank you for your purchase of an MB-D10 multi-poer battery pack for use ith all Nikon single-lens reflex digital cameras that list the MB-D10 as a compatible accessory in the camera manual. The MB-D10 takes one EN-EL3e, EN-EL4a, or EN-EL4 rechargeable battery or eight AA batteries (alkaline, Ni-MH, lithium, or nickel-manganese) and includes an alternate shutter-release button, AF-ON button, multi selector, and main and sub-command dials for taking pictures in tall (portrait) orientation. Camera menu options allo the user to choose hether the camera battery or the batteries in the MB-D10 are used first; see the camera manual for details. The MB-D10 and Accessories The MB-D10 and Supplied Accessories Confirm that the folloing items are supplied ith the MB-D10 (batteries are sold separately). MB-D10 MS-D10EN holder for EN-EL3e batteries The MS-D10EN is inserted in the MB-D10 at shipment. See Inserting Batteries for information on removing the battery holder. MS-D10 holder for AA batteries Contact cap Holder case User s manual (this manual) Warranty The BL-3 Battery-Chamber Cover (Available Separately) A BL-3 battery-chamber cover (available separately) is reuired hen using EN-EL4a or EN-EL4 batteries. BL-3 battery-chamber cover 4

8 Parts of the MB-D10 (Figure A) Contact cap Holder for camera contact cover e Signal contacts r AF-ON button t Main command dial y Multi selector u Attachment heel i Battery-chamber cover o Battery-chamber latch!0 Battery chamber!1 Mounting scre!2 Poer terminals!3 Shutter-release button!4 Control lock!5 Sub-command dial!6 Tripod socket!7 MS-D10EN holder for EN-EL3e batteries!8 Poer terminals!9 Poer terminals (EN-EL3e battery MS-D10 holder for AA Poer terminals (AA battery BL-3 battery-chamber cover (available separately) The MB-D10 Shutter Release Button, Multi Selector, Command Dials, and AF-ON Button The MB-D10 is euipped ith a shutter-release button (Figure A- ), multi selector (Figure A- ), main command dial (Figure A- ), sub-command dial (Figure A- ), and AF-ON button (Figure A- ) for use hen taking photographs in vertical ( tall, or portrait) orientation. These controls perform the same functions as the corresponding controls on the camera. See the camera manual for more information. Changes to [Multi selector center button], [Multi selector], [Photo info/playback], and [Customize command dials] in the camera Custom Settings menu (Group f ) also apply to the multi selector and command dials on the MB-D10. The function performed by the AF-ON button on the MB-D10 can be selected using the [AF-ON for MB-D10] option in Group a. See the camera manual for details. The MB-D10 Control Lock The control lock (Figure A- ) locks the controls on the MB-D10 to prevent unintended use. Before using these controls to take photographs in vertical (portrait) orientation, select to release the lock as shon at right. The control lock is not a poer sitch. Use the camera poer sitch to turn the camera on and off. 5

9 Using the Battery Pack Attaching the Battery Pack Before attaching the battery pack, be sure that the camera is off and that the MB-D10 control lock (Figure A- ) is in the L position. 1 Remove the contact cap (Figure A- ) from the battery pack. 2 The contacts for the MB-D10 are in the base of the camera, here they are protected by a contact cover. Remove the contact cover as shon in Figure B- and place it in the contact cover holder on the MB-D10 (Figure B- ). 3 Insert the MB-D10 (Figure C), keeping the MB-D10 mounting scre (C- ) aligned ith the camera tripod socket (C- ). There is no need to remove the battery from the camera before connecting the MB-D10. At default settings, the battery inserted in the camera ill be used only after the battery in the MB-D10 is exhausted. The [Battery order] option in the camera Custom Settings menu (Group d) can be used to change the order in hich the batteries are used. See the camera manual for details. 4 Tighten the attachment heel by rotating it in the direction shon by the LOCK arro (Figure D). Removing the Battery Pack Removing the Battery Pack To remove the MB-D10, turn the camera off and set the control lock on the MB-D10 to L, then loosen the attachment heel and remove the MB-D10. Be sure to replace the contact cover on the camera and the contact cap on the MB-D10 hen the battery pack is not in use. Be sure to place the camera contact cover in the contact cover holder to prevent loss. A PB-6D and PK-13 auto-extension ring are reuired hen using PB-6 bellos ith the MB-D10. 6

10 Inserting Batteries The MB-D10 can be used ith one EN-EL3e, EN-EL4a, or EN-EL4 rechargeable Li-ion battery, or ith eight AA batteries. A BL-3 battery-chamber cover (available separately) is reuired hen using an EN-EL4a or EN-EL4 battery. Before inserting batteries, be sure that the camera is off and that the MB-D10 control lock is in the L position. 1 Turn the MB-D10 battery-chamber latch to and remove the battery holder (Figure E). 2 Ready the batteries as described belo. EN-EL3e: Matching the indentations on the battery to the projections on the MS-D10EN holder, insert the battery ith the arro ( ) on the battery toard the battery holder poer terminals (Figure F- ). Press the battery lightly donard and slide it in the direction of the arro until the poer terminals click into place (Figure F- ). EN-EL4a/EN-EL4: If the battery release on the optional BL-3 battery-chamber cover is positioned so that the arro ( ) is visible, slide the battery release to cover the arro (Figure G- ). Insert the to projections on the battery into the matching slots on the BL-3 (Figure G- ) and slide the BL-3 battery lock release to reveal the arro. AA: Place eight AA batteries in the MS-D10 battery holder as shon in Figure H, making sure that the batteries are in the correct orientation. 3 Insert the battery or battery holder in the MB-D10 and latch the battery-chamber cover (Figure I). Make sure the battery or holder is fully inserted before turning the latch. 4 Turn the camera on and check the battery level in the control panel or viefinder. If the camera does not turn on, check that the battery is correctly inserted. 7

11 Battery Level The camera displays battery level as follos: EN-EL3e, EN-EL4a, and EN-EL4 Batteries Control panel Viefinder Description L Battery fully charged. K J I H d H (blinks) d (blinks) Battery partially discharged. Lo battery. Ready spare batteries. Battery exhausted. Shutter release disabled. AA Batteries Control panel Viefinder Description L Charge remaining. Lo batteries. Ready I d spare batteries. Batteries exhausted. H d Shutter release (blinks) (blinks) disabled. The [Battery order] option in the camera Custom Settings menu (Group d) can be used to change the order in hich the batteries are used. When the camera is draing poer from the MB-D10, a icon is displayed in the control panel. To ensure that the camera shos the correct battery level hen AA batteries are used, choose the appropriate option for the [MB-D10 battery type] option in the camera Custom Settings menu (Group d). If the correct option is not selected, the camera may fail to function as expected. Option Battery type 1 LR6 (AA alkaline) AA alkaline (LR6) 2 HR6 (AA Ni-MH) AA Ni-MH (HR6) 3 FR6 (AA lithium) AA Lithium (FR6) AA nickel-manganese 4 ZR6 (AA Ni-Mn) (ZR6) Remove the batteries hen the MB-D10 is not in use. Battery Info The [Battery info] option in the camera setup menu displays information on EN-EL3e, EN-EL4a, and EN-EL4 batteries (the camera battery is listed on the left, the MB-D10 on the right). Only the battery level is listed hen AA batteries are used. See the camera manual for details. 8

12 Removing Batteries Be careful not to drop batteries, the holder, or the optional battery-chamber cover. 1 Turn the MB-D10 battery-chamber latch to and remove the battery holder (Figure E). 2 Remove the battery or batteries from the holder or optional battery-chamber cover. EN-EL3e While pressing the holder PUSH button, slide the battery toard the button. The battery can then be removed as shon. EN-EL4a/EN-EL4 Slide the battery release in the direction indicated by the arro ( ) and remove the battery-chamber cover. AA Batteries Remove the batteries as shon. Be careful not to drop the batteries hen removing them from the holder. 9

13 Specifications Poer source One EN-EL3e, EN-EL4a, or EN-EL4 rechargeable Li-ion battery or eight LR6 alkaline, HR6 Ni-MH, FR6 lithium, or ZR6 nickel-manganese AA batteries Operating temperature 0 40 C ( F) Dimensions (W H D) Approx mm/ in. Weight Approx. 290 g (10.2 oz), ith MS-D10EN but excluding batteries Specifications and design are subject to change ithout notice. EN-EL3e, EN-EL4a, and EN-EL4 Batteries The performance of EN-EL3e, EN-EL4a, and EN-EL4 batteries drops at temperatures belo about 10 C (50 F). Be sure the battery is fully charged and keep a arm spare battery on hand ready to exchange as necessary. Cold batteries ill recover some of their charge hen armed. AA Batteries Due to their limited capacity, AA LR6 alkaline and ZR6 nickel-manganese batteries should be used only hen no other alternative is available. Use is not recommended at lo temperatures. In general, AA batteries have less capacity than other poer sources hen used in the MB-D10; EN-EL3e, EN-EL4a, and EN-EL4 batteries are recommended for best performance. The capacity of AA batteries varies ith make and storage conditions and may in some instances be extremely lo; in some cases, AA batteries may cease to function before their expiry date. Note that the capacity of AA batteries may drop at temperatures belo 20 C (68 F). Frame Advance Rate EN-EL4a/EN-EL4 and AA batteries support higher frame advance rates than the EN-EL3e. For more information on frame advance rates, see the camera manual. 10