Source Four XT HID Zoom 150W

Transcription

1 Source Four T HID Zoom 150W GENERAL INFORMATION ETC s Source Four T HID is a Source Four spotlight for all-weather use. Powerful Source Four optics, crisp light output and energy savings in a sleek IP66-rated watertight/dustproof design. T features ETC s Source Four Zoom optical system plus our long-life 12,000- hour, 150W HID lamp. Hang it by a yoke, place it on the ground, attach to poles and other structures the rugged T can handle any habitat wet locations, exposed architectural installations, entertainment venues, themed environments, and beyond. ORDERING INFORMATION PART NO DESCRIPTION 7065A1201-0* Source Four T HID Zoom 15 to W 230V, IP66, Black Powder coat finish with standard mounting yoke and 1.8m power cable with bare ends. FEATURES Low cop die-cast and extruded aluminium construction Stainless steel, metric hexagonal hardware at all external locations 150W ceramic metal halide lamp, 12,000-hour life (not dimmable) Integral 230V ( V) electronic ballast with greater than 90% efficiency Unique, water-tight design completely seals the optical chamber Removable barrel for easy focus Barrel hangs on yoke for hands-free oation Tilt-down ballast housing for lamp change, without disturbing focus 15 to 30 or 25 to 50 zoom range with high efficiency optics Dual internal pattern-holders suitable for B size metal or glass patterns and color Two-plane stainless steel shutter assembly with shutter rotation CE compliant IP66 rated IK09 impact protection rating Effective Projected Area (EPA): 15 to 30 : to 50 : A1202-0* Source Four T HID Zoom 25 to W 230V, IP66, Black Powder coat finish with standard mounting yoke and 1.8m power cable with bare ends. *For other colours use extensions: 1 for White, 2 for Bronze. For colours other than black, white, or bronze, please contact your dealer. ETC Source Four 150W HID Zooms are supplied with Philips CDM MASTERColor 150W ceramic metal halide lamp, steel gobo pattern holder and 1.8 meter power cable as standard. See page 7 for options and accessories. 1 of 9

2 SPECIFICATIONS PHSICAL Low-cop die-cast aluminium rear housing (A360 grade) Cop-free extruded aluminium barrel (6061-T6 grade) Stainless steel, metric hex-head hardware at all fixing points and openings (316 and 18/8 grade) Separate hex-head wrench sizes for focus/tilt/re-lamp (5mm, 8mm, 4mm, respectively) Tilt-down ballast housing with single captive screw release Pre-wired with 1.8m three-wire cord with factory installed water tight aluminium cord grip strain relief Removable ballast service plate with captive screws and EPDM rubber gasket Lamp access from rear without breaking focus Lamp cap uses four captive screws with orientation retainer and EPDM rubber gasket Heat-resistant, temed glass front lens 2.2cm thick Front of barrel has four tapped mounting holes for accessories Removable barrel for easy focus Barrel mounts only one way with internal locating pins Triple-point barrel seal with self-compressing design High-temature silicone main gasket at barrel Extruded aluminium optical rails with positive locking lens holders 20-gauge stainless steel shutters in a bi-plane assembly Six-point stainless steel spring shutter retention system Dual internal gobo pattern holders for B size metal or glass patterns Standard steel yoke allows +45 to -40 tilt when bracket- or pole-mounted Standard steel yoke allows +12 to -7 tilt when ground (pad) mounted Optional Long yoke allows +90 to -35 tilt Triple-bolt yoke mounting for swivel or fixed positioning (½ Center bolt and 3/8 side bolts) Stainless steel Nord-Lock bolt-securing systems at yoke tilt point Optional die-cast aluminium external media holder for up to two filters Optional welded aluminum half-shield for front glare control Effective Projected Area (EPA): 15 to 30 : to 50 : 1.15 The fixture is IP66 rated for water and dust ingress The fixture is rated at IK09 for shock resistance IEC 62262:2002 standards apply SPECIFICATIONS ELECTRICAL 150W, high-power factor, fully-encapsulated electronic ballast Less than 14 amps in rush current- lasts less than one AC cycle (16.7mS) NOTE: Select breakers that meet or exceed the in rush and ampacity requirement Integrated thermal protection Microprocessor-controlled safety shutdown and end-of-life protection Complies with FCC 18C Minimum starting temature : -30 C Class A sound rating Less than 10% harmonic distortion Greater than 95% power factor > than 90% ballast efficiency 230V (nominal) ( V) ballast 0.7A oating current at 230V High-temature lamp socket and socket lead wires OPTICAL Optimised optical system for photometric formance and field uniformity Faceted borosilicate reflector with dichroic cold mirror coating removes greater than 90% infrared radiation (heat) and reflects greater than 95% of visible light Reflector and lenses secured with anti-vibration shock mounts Two bi-convex lenses with anti-reflective coatings Low gate and beam temature: shutters will not warp or distort LAMP 150W ceramic metal halide ETC Source Four T HID is shipped with a 150W Philips MasterColor CDM lamp 3000 K color temature (nominal) 12,000-hour lamp life Colour Rendering Index (CRI) 85 Thirty-second ignition time Three minutes to 90% light output (run-up) Fifteen minute reignition time (cool-down) 14,000 initial lumens 95 Lm/W efficacy Optional 150W Philips MasterColor CDM 4,200 K colour temature (96 CRI) lamp available THERMAL Front lens temature 35 C Oational temature range: -30 C to +40 C 2 of 9

3 PHOTOMETRICS Photometric data below is measured with a Philips CDM MasterColor 150W (3000K) ceramic metal halide lamp. To convert data when using any other HID lamp, use the lumen or candela multiplying factors (Lm MF or Cd MF) for that specific lamp. For lumen data, multiply by the Lm MF. For candela or footcandle data, multiply by the Cd MF m 1.0m 1.4m 1.7m Illuminance (fc) 1, Illuminance (lux) 16,759 7,449 4,190 2,682 Angle Source Four T HID Zoom W set at narrowest (cosine) Narrowest 155,700 3,970 3, % 26.5 For lux multiply, footcandles by For field diameter at any distance, multiply distance by 0.23 For beam diameter at any distance, multiply distance by m 1.9m 2.5m 3.2m Illuminance (fc) Illuminance (lux) 7,815 3, Angle Source Four T HID Zoom W set at mid (cosine) Mid 72,600 6,020 4, % For field diameter at any distance, multiply distance by For beam diameter at any distance, multiply distance by m 2.8m 3.7m 4.6m Illuminance (fc) Illuminance (lux) 3,703 1, Angle Source Four T HID Zoom W set at widest (cosine) Widest 34,400 5,650 4, % 37.7 For field diameter at any distance, multiply distance by For beam diameter at any distance, multiply distance by of 9

4 PHOTOMETRICS Photometric data below is measured with a Philips CDM MASTERColor 150W (3000K) ceramic metal halide lamp. To convert data when using any other HID lamp, use the lumen or candela multiplying factors (Lm MF or Cd MF) for that specific lamp. For lumen data, multiply by the Lm MF. For candela or footcandle data, multiply by the Cd MF m 2.0m 2.6m 3.3m Illuminance (fc) Illuminance (lux) 7,204 3,202 1,801 1,153 Angle Source Four T HID Zoom W set at narrowest (cosine) Narrowest 66,930 6,425 5, For field diameter at any distance, multiply distance by 0.23 For beam diameter at any distance, multiply distance by m 3.1m 4.1m 5.1m Illuminance (fc) Illuminance (lux) 3,424 1, Angle Source Four T HID Zoom W set at mid (cosine) Mid 31,810 6,896 5, For field diameter at any distance, multiply distance by For beam diameter at any distance, multiply distance by Illuminance (fc) Illuminance (lux) 2, Angle Source Four T HID Zoom W set at widest (cosine) Widest 18,760 6,743 3, For field diameter at any distance, multiply distance by For beam diameter at any distance, multiply distance by of 9

5 PHOTOMETRICS Source Four T HID Zoom W set at narrowest degree (cosine) Cosine Plot % % s Source Four T HID Zoom W set at mid degree (cosine) Cosine Plot % % s Source Four T HID Zoom W set at widest degree (cosine) 10% 50% Cosine Plot Complete IES photometry data files (LM format) may be downloaded from the ETC website. Go to 5 of 9 s

6 PHOTOMETRICS Source Four T HID Zoom W set at narrowest degree (cosine) Cosine Plot s Source Four T HID Zoom W set at mid degree (cosine) Cosine Plot s Source Four T HID Zoom W set at widest degree (cosine) Cosine Plot s Complete IES photometry data files (LM format) may be downloaded from the ETC website. Go to 6 of 9

7 MOUNTING OPTIONS MOUNTING OPTIONS PART NO DESCRIPTION 7065A1006* Standard yoke, provides +12 to -7 tilt from horisontal when ground-mounted. Cannot be aimed straight up or down. (Supplied with fixture) PART NO 7065A1010 * DESCRIPTION Wall or square pole mount. See installation sheet for details. 159mm 81mm 514mm 274mm 330mm 208mm 229mm 203mm 7065A1007* Long yoke provides +90 to -35 tilt, allowing straight up or down aiming. See installation sheet for details. 375mm 100mm ACCESSORIES PART NO 7065A A A A1013 * DESCRIPTION Gobo holder (B-size) for steel patterns Gobo holder (B-size) for glass patterns and colour Grid Louver Insert Kit, (egg crate) insert for use with 4THS, and 4TECH. Black finish External media holder, holder for glass or gel colour for external mounting on fixture housing. Note: glass or gel size range is 188 to 198mm diameter. See installation sheet for details 7065A1008* Single-pole-mount pole-top mounting adapter for 4 pole (provided by others). See installation sheet for details.. 225mm 198mm 178mm 225mm 206mm 260mm 184mm 104mm 108mm (Inside) 7065A1014* Half-shield, 45 shield for external mounting on fixture housing. See installation sheet for details. 7065A1009 * Twin fixture pole top mount adapter for standard 4 pole (provided by others). See installation sheet for details mm 127 mm 104mm 635mm 224.8mm 108mm (Inside) 224.8mm 7 of 9

8 PHSICAL Source Four T HID Zoom W weights MODEL WEIGHT SHIPPING WEIGHT kgs kgs S4T mm 333mm 211mm 9.5mm 127mm 63.5mm 261mm 261mm 191mm 331mm 331mm 261mm 282mm Rear View 8 of 9

9 PHSICAL Source Four T HID Zoom W weights MODEL WEIGHT SHIPPING WEIGHT kgs kgs S4T mm 333mm 277mm 191mm 294mm 235mm 330mm Source Four T products are protected by one or more of the following patents: U.S. Licensed under U.S. Patent No. 5,404,283. U.S. Patents Pending Corporate Headquarters 3031 Pleasant View Rd, PO Box , Middleton WI USA Tel Fax London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0) Fax +44 (0) Rome, IT Via Pieve Torina, 48, 11, Rome, Italy Tel +39 (06) Fax +44 (0) Holzkirchen, DE Ohmstrasse 3, Holzkirchen, Germany Tel +49 (80 24) Fax +49 (80 24) Hong Kong Room 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung uet Road, Kowloon Bay, Kowloon, Hong Kong Tel Fax Web Copyright 2014 ETC. All Rights Reserved. All product information and specifications subject to change. 7060L1059-GB Rev. D 11/ of 9