Robust Clamps Shock-proof load range
|
|
|
- Damian Wilkinson
- 6 years ago
- Views:
Transcription
1 Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific solutions. 198 Robust Clamps Shock-proof load range Stainless steel
2 Shock-proof load range Loads... page 203 Right angle tube connector... page 206 Axially parallel tube connector... page 209 Robust Clamps
3 Robust Clamps Shock-proof load range... specific demands require specific solutionp. Right angle tube connector Cross clamps Angle clamps Base clamps Axially parallel tube connector Flange clamps 200 Robust Clamps Shock-proof load range Stainless steel
4 Robust Clamps - table of contents Right angle tube connector (Single-piece and multi-piece elements) Axially parallel tube connector (Single-piece and multi-piece elements) Cross clamps... p. 206 Angle clamps... p. 207 Base clamps... p. 208 Flange clamps... p. 209 ITAS Accessories Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Accessories Accessories...from p. 210 Robust Clamps 201 Appendix Support arm system
5 Robust Clamps Shock-proof load range Verion: Robust Clamps Single-piece elements For the quick and inexpensive installation Cross clamps Angle clamps Base clamps Flange clamps Stainless steel: Impact and shock load High temperature resistance Corrosion resistance Stainless steel precision casting 202 Robust Clamps Shock-proof load range Stainless steel
6 Loads robust clamps Adhesion force F [KN] Bending moment Mb [Nm] Twisting moment Mv [Nm] Cross clamps Angle clamps Base clamps Flange clamps Size Ø12-18 Ø 30, 40 Tightening toryue of clamping screws: M6: 10 Nm M8: 25 Nm M10: 50 Nm Material data sheet available upon request. Type F Mb Mv F Mb Mv K-VA 7, under preparation W-VA 4, under preparation FS-VA 5, under preparation FK-VA 6, under preparation Robust Clamps Solid Clamps Light Clamps Selection guide Introduction ITAS Accessories Robust Clamps 203 Appendix Support arm system
7 Robust Clamps Comprehensive view K-VA P. 206 K-VA P. 206 K-VA 30, 40 P. 206 Right angle tube connector W-VA P. 207 W-VA P. 207 W-VA 30, 40 P. 207 FS-VA P. 208 FS-VA P. 208 FS-VA 30, 40 P. 208 Axially parallel tube connector FK-VA P. 209 FK-VA P. 209 FK-VA 30, 40 P Robust Clamps Shock-proof load range Stainless steel
8 Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Simple probe fixation in an aggressive environment. ITAS Accessories Robust Clamps 205 Appendix Support arm system
9 Robust Clamps Cross-/Angle clamps Order instruction: C Standard equipment zinc plated screws Clamping lever see accessories page 222 K-VA Cross clamps K-VA K-VA Code No. Type A B C m [g] K-VA 12 12,1 12, K-VA 14 14,1 14, K-VA 16 16,1 16, K-VA 18 18,1 18, K-VA 20 20,1 20, K-VA 30, 40 Code No. Type A B C D L P R S m[g] K-VA 30 30,1 30, , ,5 73,5 M8x K-VA 40 40,17 40, , ,5 M10x Robust Clamps Shock-proof load range Stainless steel
10 W-VA Angle clamps W-VA W-VA Code No. Type A B m [g] W-VA 12 12,1 12, W-VA 14 14,1 14, W-VA 16 16,1 16, W-VA 18 18,1 18, W-VA 20 20,1 20,1 123 Robust Clamps Solid Clamps Light Clamps Selection guide Introduction ITAS Accessories W-VA 30, 40 Code No. Type A B C D L M P R S m[g] W-VA 30 30,1 30, , ,5 69 M8x W-VA 40 40,17 40, ,4 124, ,5 M10x Robust Clamps 207 Appendix Support arm system
11 Robust Clamps Base-/Flange clamps Order instruction: Standard equipment zinc plated screws Clamping lever see accessories page <?> FS-VA FS-VA Base clamps FS-VA Code No. Type A m [g] FS-VA 12 12, FS-VA 14 14, FS-VA 16 16, FS-VA 18 18, FS-VA 20 20,1 99 FS-VA 30, 40 Code No. Type A B D G H K L M N P R S m[g] FS-VA 30 30,1 7 37, ,5 41 M8x FS-VA 40 40, , M10x Robust Clamps Shock-proof load range Stainless steel
12 FK-VA FK-VA Flange clamps FK-VA Code No. Type A m [g] FK-VA 12 12, FK-VA 14 14, FK-VA 16 16, FK-VA 18 18, FK-VA 20 20,1 120 Robust Clamps Solid Clamps Light Clamps Selection guide Introduction ITAS Accessories FK-VA 30, 40 Code No. Type A B C D E G H K L M N O P S m[g] FK 30 30, ,4 32, , ,5 M8x FK 40 40, ,4 46, M10x Robust Clamps 209 Appendix Support arm system
13 Accessories 210 Accessories Light-, Solid- and Robust Clamps
14 Light-, Solid- & Robust Clamps Accessories... ab p. 212 Accessories
15 Accessories Print head holder on a packaging machine can be moved as required. 212 Accessories Light-, Solid- and Robust Clamps
16 Accessories - table of contents Accessories Steel-, Stainless steel-, Aluminium tubes... p. 214 Aluminium bars /-profiles... p. 216 Threaded stopper... p. 217 Tube stopper... p. 218 Special tube fittings... p. 219 Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Adjustable feet... p. 220 Castors... p. 221 ITAS Accessories Clamping levers / Insert nuts...from p. 222 Accessories 213 Appendix Support arm system
17 Accessories Order instruction: Cut-to-length or standard lengths Steel-, Stainless steel tubes / round Code No. Type D tol. zinc-plated _ 12x1,5 12 ± 0,1 L max. zinc-plated D tol. stainless steel 12 ± 0,12 L max. stainless steel _ 14x1,5 14 ± 0,1 14 ± 0, _ 15x1,5 15 ± 0,1 15 ± 0, _ 16 x1,5 16 ± 0,1 16 ± 0, _ 18x1,5 18 ± 0,1 18 ± 0, _ 20x2 20 ± 0,1 20 ± 0, _ 25x2 25 ± 0,1 25 ± 0, _ 30x2 30 ± 0,1 30 ± 0, _ 32x3 32 ± 0,15 32 ± 0, * 35x3 35 ± 0, _ 40x , , * 42x4 42 ± 0, * 45x4 45 ± 0, * 48x3,5 48 ± 0, * 48x4 48 ± 0, _ 50x , , * 55x4 55 ± 0, _ 60x , , * 62x5 62 ± 0, * 80x5 80 ± 0,35 70 Length: every length is possible standard lengths**: 0500, 1000, 2000, 3000 und 4000 mm d * Not available in stainlees steel ** standard lengths only for galvanized zinc-plated Version: 0 = polished St = galvanized zinc-plated St = stainless steel VA Accessories Light-, Solid- and Robust Clamps
18 Steel / square Code No. Type D tol. L max. zinc-plated _ 20x1,5 20 ± 0, _ 25x1,5 25 ± 0, _ 30x2 30 ± 0, _ 40x3 40 ± 0, _ 50x3 50 ± 0, _ 60x4 60 ± 0, _ 80x5 80 ± 0,5 Length: every length is possible standard lengths 0500, 1000, 2000, 3000 und 4000 mm Version: 0 = polished St = galvanized zinc-plated St 37-2 Stainless steel tubes / square Standard tube has no tolerance limit Code No. Type D tol. L max x1, x1, x x x x x5 Length: every length is possible Accessories 215 Robust Clamps Solid Clamps Light Clamps Selection guide Introduction ITAS Accessories Appendix Support arm system
19 Accessories Order instruction: Cut-to-length or standard lengths Aluminium tubes round square Code No. Type D tol. d L max _ 20x3 20 ± 0, _ 30x2 30 ± 0, _ 40x3 40 ± 0, _ 50x3 50 ± 0, _ 60x , _ 20x1,5 20 ± 0, _ 30x2 30 ± 0, _ 40x4 40 ± 0, _ 50x4 50 ± 0, _ 60x4 60 ± 0,4 52 Length: every length is possible Version: 1 = natural AlMgSi0,5 2 = clear anodized AlMgSi0,5 3 = black anodized AlMgSi0,5 (on request) Aluminium bars Code No. Type D tol. L max. round _ _ square _ Length: every length is possible Version: 1 = natural AlMgSi0,5 2 = clear anodized AlMgSi0,5 3 = black anodized AlMgSi0,5 (on request) 216 Accessories Light-, Solid- and Robust Clamps
20 Aluminium profile F-20x20 E01000BBC Code No. Version Anodized bar natural E01000BBA cut natural max mm E01000BCC bar black E01000BCA cut black Length: Standard lengths (clear and black anodized) 500, 1000 und 2000 mm On request every cut is possible Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Round tube threaded stopper Code No. Type D G H N Aluminium M10 50x M M10 60x M ITAS Accessories Square tube threaded stopper Code No. Type D G H N Aluminium M10 50x3 50x M M x4 60x60 M M20 Accessories 217 Appendix Support arm system
21 Accessories Round tube stopper Code No. Type packaging Ø D N Black polyethylene x1, C 18x1, x C 20x x C 25x x C 30x x x x x x x x3 / 50x x Aluminium x x Square tube stopper Code No. Type packaging D N Black polyethylene 90400C 20x x x1,5 25x x2 30x x2,5 35x x x4 1 40x x3 50x x4 60x x5 80x80 Aluminium x3 50x Accessories Light-, Solid- and Robust Clamps
22 Order instruction Steel parts galvanized zinc-plated Clamping element for Ø and tubes Clamping capacity for Ø 21 40,5 mm Clamping capacity for 16,5 32 mm Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Special tube fittings ITAS Accessories Code No. DIN 912 Code No. DIN 7991 Ø Type x2 Type x2 25x1, x x x4 30x x x4 35x2, x3 Accessories 219 Appendix Support arm system
23 Accessories Order instruction: Hinge parts PA, black Steel parts galvanized zinc-plated Adjustable feet with special tube fittings Code No. Ø Type Type x x2 25x1, x x x4 30x x x4 35x2, x3 Adjustable feet Code No. A B C D E L SW M M * M * * with anti-vibration pat 220 Accessories Light-, Solid- and Robust Clamps
24 Rubber wheel, width 25 mm Ball bearing polyamide rim blue-grey rubber tyre thread guard load capacity 600 N Castors with special tube fittings and wheel brake Code No. Ø Type Type x x2 25x1, x x x4 30x x x4 35x2, x3 Other versions up on request Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Rubber wheel, width 25 mm Ball bearing polyamide rim blue-grey rubber tyre thread guard load capacity 600 N ITAS Accessories Fixed wheels with special tube fittings Code No. Ø Type Type x x2 25x1, x x x4 30x x x4 35x2, x Accessories 221 Appendix Support arm system
25 Accessories Instructions: Regarding its dimensions and adjustability the lever is perfectly adapted to the RK clamp system. The handle must be lifted high enough to disengage allowing confined space tightening or loosening as desired. It relocks by means of spring pressure. Materials: Handle made of zinc pressure casting according to DIN 1743, steel parts quality class 5.8, galvanized. Clamping lever Upon request: Hand levers with plastic handles Hand levers with stainless steel threaded fitting Code No. Type A B C D E G H K L M m [g] HV 5x ,5 25,5 M5 5, ,5 37,5 13, HV 6x ,5 26,5 M6 6, ,5 13, HV 6x HV 6x ,5 26,5 M6 6, HV 6x ,5 13, HV 6x ,5 26,5 M6 6, ,5 13, HV 6x HV 6x ,5 26,5 M6 6, ,5 13, HV 6x HV 6x HV 6x ,2 29,2 M6 6, HV 6x HV 8x M8 8, HV 8x HV 8x M8 8, HV 8x HV 8x M8 8, HV 8x HV 8x , ,5 22 M8 8, HV 8x HV 8x HV 8x ,5 36 M8 8, , HV 8x HV 10x ,5 M HV 10x HV 10x ,5 M HV 10x HV 10x ,5 M HV 10x ,5 M HV 10x HV 12x HV 12x ,5 M12 13, HV 12x HV 16x M Accessories Light-, Solid- and Robust Clamps
26 Insert nut Steel thread insert (exchange piece) Code No. Type H M SW galv. zinc-plated galv stainless steel stainless steel 7, galv. zinc-plated galv stainless steel stainless steel galv. zinc-plated galv galv. zinc-plated galv galv. zinc-plated galv stainless steel stainless steel galv. zinc-plated galv stainless steel stainless steel ITAS Accessories Robust Clamps Solid Clamps Light Clamps Selection guide Introduction Holder for a camera on a seed spreading machine made of clamping pieces and clamping levers. Accessories 223 Appendix Support arm system
Incremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
Incremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
ENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
UKB-ACCESSORIES
12 WWW.UKB-GMBH.COM Squaring arms. 234 235 Digital angle gauge. 235 Insertion tools. 236 237 Phone +49 (0) 27 36 / 44 42-0. Fax +49 (0) 27 36 / 44 42-22 Squaring arms ADVANTAGES Flexible and exact adjustable
LOCAL EXTRACTORS Pure advantages. The ideal extractor for industrial environments.
N new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability. H - Hood designed for maximum capture PR's design is based on Movex's basic principles:
AHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
Absolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
SERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
english Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group
english 27 Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group Ideas move Ideas move the world icotek GmbH is a privately held company in the
Absolute encoders multiturn
PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these
Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:
Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX
Position Transducers Pivot head mounting potentiometric up to 300 mm, IP54 Series TEX Special features compact dimensions protection class IP54 mountable over back-lash free pivot heads with a large angle
Approx. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature
sales@jumo.co.uk info.us@jumo.net Page/6 Dial Thermometer Type 608225 Special features Class Display ranges from -40 C to +600 C Temperature indicator as built-in or add-on device Stainless steel case
Incremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
Ball and Socket Shafts Series 0.800
Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When
Multitronic. Technical data
Multitronic EMC Aluminium enclosure system for MCR technology Integrated guide grooves for PCB s External mounting slots with spring nuts Technical data Material: DIN EN 573 EN AW-AlMgSi Ingress protection:
Pipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
Delivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
Tube Holders / Support Arms
Tube Holders / Support Arms Anesthetic Tube Holders with flexible rod - adjustable in height, length of support arm: 38 cm - clamp and holder optional according to schema Swivelling universal tube holder
Wheelchair, foldable heavy duty
SPARE PARTS MANUAL WHEELCHAIRS Sideguard 2 5 6 7 4 8 9 0 0 95024 Sideguard, heavy duty, right pc. 02 9502 Sideguard, heavy duty, left pc. 0 42002 Sideskirt black, right pc. 04 4200 Sideskirt black, left
NOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
DIN Rail Mounted Terminals & Accessories
DIN Rail Mounted Terminals & Accessories PAGE PAGE STANDARD CONTA-CONNECT RANGE 253 NEW! CABLECRAFT ABS-S ENCLOSURES 260 DOUBLE & TRIPLE CONTA-CONNECT RANGE 254 NEW! CABLECRAFT ALUMINIUM ENCLOSURES 260
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
MICROPHONE stands & accessories
MICROPHONE stands & accessories 03 Microphone Stands & Accessories 300 SERIES MICROLITE MICROPHONE STANDS - Constructed with strong, lightweight Microlite tubular steel - Fast, smooth, non-slip boom swivel
Mechanical accessories
Bearing box Part no. 01209010, 01209029 Part no. 01209010 01209029 Shaft size Ø 15 mm Ø 10 mm Shaft load max Radial: 250 N, Axial: 150 N Speed max 4000 rpm Protection class IP 64 according to IEC 60529
PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
Wheels and Castors. AUT (Wheels and Castors) Ltd are a national castor company that have supplied quality wheels and castors for the last 35 years.
6 1 AUT (Wheels and Castors) Ltd are a national castor company that have supplied quality wheels and castors for the last years. All our castors are tested to all relevant European norms so you can be
Single action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
Rotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
Rotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
SPARE PARTS & ACCESSORIES
4U FAMILY SPARE PARTS & ACCESSORIES My-Netti.com 209-03 WIdE assortment ENSURINg THE RIgHT SOLUTION FOR you SPARE PARTS & ACCESSORIES Frame Seat & Back unit Head Support Arm Support Foot Support Wheel,
Sense it! Connect it! Bus it! Solve it! ENCODERS
Sense it! Connect it! Bus it! Solve it! ENCODERS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
Organisational Kitchen Fittings Drawer and Front Extensions
GRASS NOVA PRO TOUCH LATCH SENSO Application: For drawer and front pull-out Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with self opening mechanism
DIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
SUPERMARKET ALU GUIDE RAIL SYSTEM G3 Wheel guidance on one side Monorail system For trolleys with wheel width up to 50 mm
Wheel guidance on one side Monorail system up to 50 mm monorail system: Optimal and visual overview Standardized FIFO and KANBAN supermarket systems Ensures exact positioning of the material close to where
THE VERSATILE MATERIAL HANDLING SYSTEM
102 THE VERSATILE MATERIAL HANDLING SYSTEM 103 Modern factories are geared towards high speed production. Time pressure increases constantly. Changeover time between production runs need to be shorter.
Rotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
All prices in CHF, excl. taxes, ex works Solothurn, payment within 30 days net
Price list 2018 Standard program Magnetic holding devices Dial test indicator holder Selecting magnet Demagnetizer Holding and sticking magnets Rubber magnets Conditions: Delivery terms: All prices in
Absolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
Cable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
SUPERMARKET ALU GUIDE RAIL SYSTEM G3 Wheel guidance on one side Monorail system For trolleys with wheel width up to 40 mm
Wheel guidance on one side Monorail system up to 40 mm monorail system: Optimal and visual overview Standardized FIFO and KANBAN supermarket systems Ensures exact positioning of the material close to where
english Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group
english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation
8mm 16mm F $ $ mm 19mm F $ $ mm 25mm F $ $ mm 32mm F $ $135.
Sheet Metal Part No Galv Sheet 800 x 600 x 0.55mm F106765 $11.50 $9.20 10 Galv Sheet 800 x 600 x 0.75mm F106766 $14.70 $11.70 10 Galv Sheet 800 x 600 x 0.95mm F105143 $24.70 $19.80 10 Aluminium Sheet (H34)
Medical Rail Systems 147
Medical Rail Systems 147 Medical Rail Systems + unobtrusive + tidy + many variants 148 General Product Introduction Medical Rail Systems Different rooms, different walls - one solution: Medical rail systems
robust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
Rotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
General Catalog Unlocking the full potential of your machines
General Catalog Unlocking the full potential of your machines 182 EROWA ITS Compact Combi Three in one Seamless integration into the existing ITS system. The ITS Compact CombiChucks have the same mounting
Stainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
LOCAL EXTRACTORS. The ideal extractor for industrial environments. Pure advantage
The ideal extractor for industrial environments. New technology in combination with new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability.
Encoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
TECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
MPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More Precision. wiresensor // Draw-wire displacement sensors
More Precision wiresensor // Draw-wire displacement sensors 28 Robust miniature sensors wiresensor MP / MPW analog - Miniature design - Optional IP 67 (MPW) - For fast measurement and harsh environments
Grommets & OFFICE Accessories
Groets & OFFICE Accessories SISO A/S MILEPARKEN 11 DK - 2740 SKOVLUNDE (COPENHAGEN) DENMARK PHONE: (+45) 45 830 900 FAX: (+45) 45 830 444 DISTRIBUTOR Contents GROMMETS 4-13 WIRE MANAGERS 14-17 keyboard
MDT 2000 Magnetostrictive linear position transducer
Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,
Absolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
Limanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes - 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and
SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS
BX ZA SIZES FROM 1,500-100,000 Nm BAKLASH FREE, TORSIONALLY STIFF METALLI BELLOWS OUPLINGS BELLOWS OUPLINGS BX ZA Optional: GENERAL INFORMATION ABOUT R+W BELLOWS OUPLINGS: SERVIE LIFE R+W bellows couplings
Inductive sensor NI3-EG08K-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M8 x 1 Stainless steel, 1.4427 SO DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR)
ELAP product line offers a wide array of position transducers and a choice of counting and control equipments
THE COMPANY Since 1968 ELAP has been growing in the field of industrial automation, soon becoming leader manufacturer of position sensors and control equipments for industrial automation. ELAP product
Insertion RTD temperature probe
Data sheet 902350 Page 1/6 For temperatures between -50 and +260 C Steam-tight and pressure-resistant High mechanical strength For use in the food industry Available with multiple measuring points Due
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
MCH WIRE HARNESS WITH QUICK DISCONNECT REPLACEMENT Initial Release 1/31/2013
1. Table of Contents 1. Table of Contents Page 1 2. Remove Failed MCH-103.2 Page 1 3. Install MCH-103.2 to MCH-102NW Page 2 4. Install NC3FX-HD to MCH-103.2 Page 3 5. Install MCH-103.2 Battery Terminal
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
Multiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
Standard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
Absolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710
BG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
System 16 Precision-Clamping & Welding Bench
UKOP-2.04K16 System 16 Precision-Clamping & Welding Bench System 16 Contents System 16 S4 Welding bench Aluminium Plate with holes Bench legs Stops Squares Prisms Bolts Clamps Fast clamping 2-3 4-5 6-7
3D-Welding Table Systems
3D-Welding Table Systems www.tempus-holding.de Contents 3D-Welding Table Systems SST-Fix Series & SSTW-Fix Series 2 SST-Flex Series & SSTW-Flex Series 4 SST Accessory Kits 6 Assembly Tables SMT-Fix Series
Cable Entry Systems for Potentially Explosive Atmospheres
Cable Entry Systems for Potentially Explosive Atmospheres Directive 94/9/EC (ATEX) KEL-ER KVT 80 ATEX stands for ATmosphères EXplosives and is the short name for the European Directive 94/9/EC, regulating
Encoders without bearings - incremental Magnetic sensing, through hollow shaft max. ø180 mm pulses or 128 sinewave cycles per turn
Features Sinewave or square-wave signals Robust and wearless High protection through fully encapsulated electronics Large tolerances: axial ±3 mm, radial max. 2.2 mm Very compact dimensions Simple mounting,
Manual Clamps for Automotive Prototype Production
Manual Clamp interchangeable with 82M-6 This newest version provides more clamp arm variations and in addition two hold open devices. Opening angle can be reduced now. Page 15.2 New products 15.0 Notes
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Inductive sensor BI1.5-EG08-Y1-H1341
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
MK-101 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-0 TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space below. The Serial
Limanda. Technical data
Polyamide hand held enclosures for data acquisition, MCR and automation engineering 2 sizes: 270 x 248 x 64 mm to 311 x 281 x 72 mm Large fitting area For installations and command devices mobile and stationary
lindab duct suspension & support system Duct suspensions & Support systems
Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets
Resistance thermometer With spring-loaded tip Model TR55
Temperature Resistance thermometer With spring-loaded tip Model TR55 WIKA data sheet TE 60.55 for further approvals see page 2 Applications Bearing temperature measurement on: Pumps Gears Motors Special
T-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
Maria Splitt Only for informational purpose, will not be replaced in case of changes Print Date: 1/23/2013 1:01 PM Z-No Mat-No. Change Master Quantity Unit Description Specification Order Type Status 1
STORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
Level Transmitter. Table of dimensions see page 4. Total length B Installation length A SW55 Ø 55 Ø 75
Level Transmitter Construction The GEMÜ level transmitter has an immersion tube with reed contacts and a chain of resistors which are triggered by a float with an integrated permanent magnet. A threaded
Description of parts Panel mounting Insert mounting without/with Carrier element Plastic housings
- Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting
TECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)