ST-PTZ High-Speed Intelligent Dome PTZ Color Camera

Transcription

1 INSTALLATION MANUAL ST-PTZ High-Speed Intelligent Dome PTZ Color Camera Copyright North American Cable Equipment, Inc. 1

2 PACKAGE CONTENTS This package contains: One ST-PTZ high-speed intelligent dome color camera. One mounting bracket. One 24VAC 3A power supply. One installation manual. PRODUCT DESCRIPTION The ST-PTZ is a professional grade intelligent dome color camera with pan, tilt and zoom (PTZ) capability of 550TVL (color) and 680TVL (black & white) of resolution. The camera s design allows the saving of all settings in non-volatile memory. Its 128 preset positions and 8 privacy zones provides versatility for cruise routes and auto tracking functions. The ST-PTZ s mechanical design permits continuous horizontal 360 rotation and 90 vertical flip. Temperature management is built-in. SPECIFICATIONS ST-PTZ Specifications (Typical) 1. Image Sensor Samsung SDM-270 with ¼ SONY CCD 2. Resolution 550TVL Color; 680TVL B&W 3. Lens Auto Iris; F=3.5 to 94.5mm; 26X Optical Zoom, 12X Digital Zoom 4. Illumination 0.1 Lux 5. Pan Range 360º continuous 6. Tilt Rotation Range 0º - 90º flip 7. Manual Speed Pan 0.1º - 300º/sec 8. Manual Speed Tilt 0.1º - 120º/sec 9. Preset Speed 300º/sec 10. Preset Accuracy ± Preset Positions Function Display Yes 13. Operation Crosshair Function Yes 14. Pan & Tilt Position Display Yes 15. Privacy Zones 8 programmable zones 16. Sector Label Display 8 programmable zones 17. Recall Function Yes 18. Operation Return Function Yes 19. PTZ Tours 3 programmable 20. Vector Scan Groups 6 programmable (dwell time speed preset point) 21. Protocol Pelco-D, Pelco-P selectable 22. Auto Scan With smart programmable variable speed 23. High Efficient 3-Dimension Scan Yes 24. Long-Focus Speed Limited Yes 2

3 25. Intelligent Power Off Yes 26. Home Position Yes 27. Camera Menu Operation Yes 28. IP66 for Outdoor Use Yes 29. Operating Humidity 95% 30. Heater Operation 42ºF on; 57ºF off 31. Operating Temperature -40ºF - 122ºF 32. Video Connection BNC coaxial 33. Power 35W 34. Communication RS485(+/-) INSTALLATION AND OPERATION This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions. This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock. CAUTION: To reduce the risk of electrical shock do not remove the cover or back of this unit. No user serviceable parts are inside. CAUTION: To prevent electric shocks and risk of fire hazards, do not use other than specified power source. 1. UNPACKING and HANDLING Each unit is shipped assembled and factory tested. Ensure that all accessories are removed from the container before discarding packing material 2. MECHANICAL INSPECTION Inspect the front and rear of the equipment for shipping damage. Make sure the equipment is clean, and no connectors are broken, damaged, or loose. If equipment appears to be damaged or defective please contact your distributor or SecurityTronix at for assistance. 3. SPECIAL ATTENTION a. The installer must comply with electrical safety standards. There must be sufficient space between the camera s power supply and video line and any high voltage equipment and/or cables. b. To help ensure the camera s life and proper operation do not point the camera towards the sun or strong light. c. Do not install the camera in an environment where the temperature is above 122 F. d. Do not install the camera near a magnetic field or a high-power motor. e. Do not mount the camera near a radiator or heater. 3

4 f. The installation site and material must fully support the weight of the product. g. Only use a dry cloth to clean the camera. If there is dirt that is difficult to remove wipe gently with a mild detergent. Never use strong or abrasive detergents. h. The included 24VAC at 3A power supply must be used. Using a DC or other incorrect power supply will damage the camera. i. Only qualified installers are allowed to install, test and disassemble the camera. j. The camera is a low voltage product. If installed outdoors proper safety and lightning grounding are required. k. Before installing be sure the grounding, wiring, input power, voltage, DIP switches, communication protocol and baud rate are correctly set prior to powering up and using. 4. CAMERA SETUP System Setup DIP Switch SW1 Dome Address DIP Switch SW2 Alarm Terminal 8P RS485 Terminal 2P AC24V Power 1P Aux. Switch 4P 120Ω Resistance Short-Circuit Pin Address Set Up See Appendix A for DIP Switch SW2 configurations for camera addresses. Alarm Signal Alarm Relay Output AUX1 Alarm Relay Output AUX2 Alarm Input GND Alarm input signal -7 1, 2, 3, 4, 5, 6, 7 = Alarm Input Signal AUX1, AUX2 = Auxiliary Equipment GND = Alarm Input Grounding 4

5 System Setup DIP Switch SW1 ON = 1 OFF = 0 Baud rate setting DIP Switch Function DIP Switch 3, 2 = 00= = =9600 ON and OFF are indicated on the DIP Switches to show the DIP positions. PELCO-D and PELCO-P can be automatically recognized. J7 pin = if jumpers 2-3 is short circuited, terminal connects to 120Ω resistance. If jumpers 1-2 short, terminal is not connected to 120Ω resistance. To select the baud rate set switches 3 and 2 on the System Setup DIP Switch as described above. Camera Module Selection The ST-PTZ uses the Samsung SDM-270 camera module although various other camera modules may be compatible with the unit. The DIP switch settings on the camera module s PCB board are factory set for the SDM-270 and are not to be adjusted by the installer or user. 5. WIRING CONNECTIONS 1. Power supply and communication cable: AC24V power supply 2. Video output AC24V power RS485 a. Connect the power supply cable and communications cable to the AC24V and RS485 connections on the main board as shown above. b. Connect the camera to the monitor with a 75 coaxial video cable. c. Connect power supply s AC plug to a suitable AC power outlet. d. Make an RS485 connection between the camera and the PTZ controller. Ensure the connections at the PTZ controller and camera have the same polarities. 5

6 6. FUNCTIONS and OPERATION Basic Operation After powering up the ST-PTZ s version number, communication protocol, baud rate and address will be shown on the monitor. At the same time, the system will check the pan and tilt status and display the results. The information will disappear once operations begin. High Speed Dome Ver:2.20 PELCO D/P BPS:2400 ID: 001 Tile Ref OK Pan Ref OK SONY FCB-EX480CP The table below is a quick guide to the camera s basic operations using a PTZ Controller: Function Pan/Tilt Menu Confirmation Menu Cancellation Zoom Out Zoom In Focus Far Focus Near Auto Focus Enter Programming Menu Return Zero Pan/Tilt Point Start Pan Scan Auto Flip Pan Scan Limit Call Tour 1 Operation Move joystick to left, right, up, and down Press [OPEN] Press [CLOSE] Press [TELE] or rotate joystick clockwise for the desired image. Press [WIDE] or rotate joystick counter clockwise for the desired image. Press [FAR] until there is a clear image Press [NEAR] until there is a clear image The dome is in the auto focus mode when the joystick is moved left, right, up, down or turned. For manual focus press any key. Call preset 95 or user defined preset. Please refer to short-cut menu. Call preset 34 or user defined preset. Please refer to short-cut menu. Call preset 99 or user defined preset. Please refer to short-cut menu. Call preset 33 or user defined preset. Please refer to short-cut menu. Left limit: Call preset 92 or a user-defined preset. Please refer to short-cut menu. Right limit: Call preset 93 or a user-defined preset. Please refer to short-cut menu. Call preset 96 or a user-defined preset. Please refer to short-cut menu. Call Tour 2 Call preset 97 or a user-defined preset. Please refer to short-cut menu. Call Tour 3 Call preset 98 or a user-defined preset. Please refer to short-cut menu. Call Camera Mode 1 Call preset 100 Call Camera Mode 2 Call preset 101 Call Camera Mode 3 Call preset 102 Privacy Zone Able to edit 4 areas as privacy zones to protect individual privacy. Please refer to 6

7 programming menu. Press [FAR] to increase horizontal zones. Press [NEAR] to reduce horizontal zones. Privacy Zone Press [TELE] to increase vertical zones. Press [WIDE] to reduce vertical zones. Menu Operation Call preset 95 to enter the menu setup. The main menu will be shown on the screen. Note the following symbols: Indicates current working cursor Indicates current activated cursor Indicates there is a sub-menu after the current menu The menu content is only changed under activated status. During menu operation the OPEN key is used for confirmation and the CLOSE key is used for cancellation. The UP key is to move the cursor up and the DOWN key is to move the cursor down. Upon calling preset 95 the main menu screen may appear as Camera Pan Shortcut Key Self act Alarm Set Degree Nothing ON Camera Sub-Menu The quality of the target image is dependent upon the camera parameters set under the camera menu. These parameters should be set to site-specific situations. The camera menu will allow the control of exposure, white balance, privacy zones, digital zoon, infrared light sensitivity, zoom speed, focus speed and other functions. Under the main menu position the cursor to Camera and press OPEN to enter the camera sub-menu and set up the camera s parameters. Note that exposure, white balance, focus, privacy, other and camera model have a sub-menu. Zoom speed changes when activated. Exposure White Balance Focus Privacy Other Camera Model Zoom Speed 5 Focus Speed 1 Exposure To maintain a clear image a suitable white balance and correct focus must be selected. Further, the exposure must be properly controlled to ensure sufficient light. Under Exposure press OPEN to enter the exposure sub-menu. The exposure sub-menu will display several functions. Various functions have multiple settings. 7

8 Exp Mode AUTO Shutter speed 6 Iris 15 Gain 1 Bright 15 BackLight OFF BackLight Val 0 Slow Shutter OFF Exp Mode Auto Shutter Speed 6 (0 19) Iris 15 (0 17) Gain 1 (0 15) Bright 15 (0 18) Backlight OFF (ON/OFF) Backlight Val 0 Slow Shutter OFF (ON/OFF) To change exposure mode under Exp Mode press OPEN to enter the exposure mode menu. Once done the menu becomes Exp Mode. Move the joystick up or down to change the exposure modes. Confirmation of an exposure mode selection Under Exp Mode press OPEN. The menu will then turn to Exp Mode. Cancellation of an exposure mode selection Under Exp Mode press CLOSE. The menu will then turn to Exp Mode. Exit Exposure Mode Exp Mode press CLOSE to exit the exposure mode and return to the main menu. Exp Mode Auto Shutter speed 6 Iris 15 Gain 1 Bright 15 BackLight OFF BackLight Val 0 Slow Shutter OFF Exp Mode Auto Shutter speed 6 Iris 15 Gain 1 Bright 15 BackLight OFF BackLight Val 0 Slow Shutter OFF For other exposure mode operations under Exp Mode move the joystick up or down. The symbol will move to the relative menu to show the current menu can be operated. Upon pressing OPEN to activate a menu the symbol will appear before the selected menu. Then move the joystick up or down the change the menu setup. Press OPEN to confirm the changes or CLOSE to cancel. Once completed the symbol will appear before the menu. White Balance White Balance (WB) is the process of removing unrealistic color casts so objects that appear white in person are rendered white in the image. Proper camera white balance must take into account the color temperature of a light source the relative warmth or coolness of a light source. The camera offers the option of AUTO white balance or MANUAL white balance. Exposure White Balance Focus Privacy Other Camera Model Zoom Speed 5 Focus Speed 1 Under White Balance press OPEN to enter the white balance sub-menu. 8

9 WB mode Auto R Gain 210 B Gain 175 White Balance Auto R Gain 210 (0 255) B Gain 175 (0 255) For WB Mode Setup Under WB mode press OPEN to activate the WB mode menu after which the menu turns to WB mode. Move the joystick up or down to change the setup. The order of parameters on the right will be Auto, Manual, Outdoor, Indoor, ATW and OPW. For R Gain Setup Under WB mode move the joystick down to R Gain and press OPEN to enter the R Gain setup. Then move the joystick up or down to adjust the R Gain values from 0 to 255. Once the value has been selected press OPEN to confirm or CLOSE to cancel. For B Gain Setup Under WB mode move the joystick down to B Gain and press OPEN to enter the B Gain setup. Then move the joystick up or down to adjust the B Gain values from 0 to 255. Once the value has been selected press OPEN to confirm or CLOSE to cancel. Privacy To protect certain areas (e.g., a password input area or a manager s work area) there may be a need to mask those areas from surveillance. Under Exposure move the joystick down to the privacy menu. Press OPEN to enter the privacy sub-menu to set up the parameters. There are 4 privacy zones: Privacy1, Privacy2, Privacy3, Privacy4. Exposure White Balance Focus Privacy Other Camera Model Zoom Speed 5 Focus Speed 1 Privacy1 Privacy2 Privacy3 Privacy4 The following PTZ Controller function keys are used to set privacy zone parameters: OPEN Confirmation CLOSE Cancellation FAR Increase Horizontal Area NEAR Reduce Horizontal Area TELE Increase Vertical Area WIDE Reduce Vertical Area Under the privacy sub-menu press OPEN to adjust the privacy zones using the above function keys. Press OPEN to confirm the previous setup. 9

10 To cancel privacy zones There are two options: (a) restart the camera or (b) decide which privacy zone(s) is to be cancelled. Then enter the relative privacy zone menu, press OPEN to enter the menu, the press CLOSE to cancel the relative privacy zone when the above menu appears. Other Digital Zoom Auto ICR ICR Display ON OFF OFF OFF Digital Zoom ON (ON/OFF) Auto ICR OFF (Auto ICR ON/OFF) ICR OFF (Manual ICR ON/OFF) Display OFF (Camera Info ON/OFF) To access an Other sub-menu move the joystick to the desired sub-menu. Once selected the current sub-menu press OPEN then move the joystick up or down to select the desired parameters. Press OPEN to confirm the selection or CLOSE to cancel. Camera Mode The Camera Mode is used to set various camera settings for the ambient environment. Given the ambient environment may be changing (e.g., day and night) the unit allows the user to create and recall specific settings to easily manage changing conditions. Under the Camera Mode menu press OPEN to enter the camera mode setup menu. Camera Mode Save: Normal Day Night Camera Mode Exec: Normal Day Night Camera Mode Save Camera Mode Exec Normal Day Night Save Camera Mode Call saved Camera Mode Mode 1 (Standard) Mode 2 (Day) Mode 3 (Night) and exit. Camera Mode Save: Normal Day Night Camera Mode Exec: Normal Day Night The 3 menus under Camera Mode Save are previous saved camera modes. Move the cursor to a camera mode and press OPEN. will change to and return to after 1 second after which the camera mode is successfully saved. There are 3 saved camera modes for calling under Camera Mode Exec. The order is the same as that of Camera Mode Save. Move the cursor to a certain camera mode then press OPEN to confirm Camera modes can be selected by calling certain presets: 10

11 NORMAL call preset 100 DAY call preset 101 NIGHT call preset 102. NORMAL is the default mode. Zoom Speed Under the Exposure sub-menu move the cursor to Zoom Speed and press OPEN and change the parameters after the symbol turns to. Then press OPEN to confirm or CLOSE to cancel after which the symbol will return to. Focus Speed Under the Exposure sub-menu move the cursor to Focus Speed and press OPEN and change the parameters after the symbol turns to. Then press OPEN to confirm or CLOSE to cancel after which the symbol will return to. Pan The Pan Menu is found under the Main Menu. Through the Pan Menu users can open and close a home position, adjust auto pan speed, set the tour speed and dwell time and open and close auto flip. Home place OFF Leisure Time 30 AS speed 20 PS1 Speed 100 PS1 time 5 PS2 Speed 100 PS2 time 5 PS3 Speed 100 PS3 time 5 Auto Flip ON Home Place OFF (ON/OFF, 1 32) Leisure Time 30 AS Speed 20 Auto Pan Speed (0 80) PS1 Speed 100 Tour 1 Speed ( ) PS1 Time 5 Tour 1 Leisure Time (5 120) PS2 Speed 100 Tour 2 Speed ( ) PS2 Time 5 Tour 2 Leisure Time (5 120) PS3 Speed 100 Tour 3 Speed ( ) PS3 Time 5 Tour 3 Leisure Time (5 120) Auto Flip ON (ON/OFF) Shortcut Key 11

12 The Shortcut Key Menu is found under the Main Menu. Shortcut keys allow the association of a certain function with a corresponding preset allowing for quick and convenient function selection. Open Menu 95 Auto Flip 33 Reference 34 Left Limit 92 Right Limit 93 Preset scan 1 96 Preset scan 2 97 Preset scan 3 98 Auto scan 99 Open Menu Auto Flip Reference Left Limit Right Limit Preset scan 1 Tour 1 Preset scan 2 Tour 2 Opens the menu Auto Flip Zero Point Left Limit Right Limit Preset scan 3 Tour 3 Auto Scan Auto Scan The values in the above menu are defaults. When new values are specified as shortcut keys the default values are still effective. For example, if the user specifies 16 as the shortcut key to open menu, the menu still can be opened by calling preset 16 and 95. Tour 1 includes preset 1 8; Tour 2 includes preset 9 16 and Tour 3 includes preset If there are missing presets in one tour the system will re-scan from the first preset. If the first preset was not set the system will exit the tour. Newly set values should not be the same with any of the above shortcut preset values. To set shortcut keys move the cursor to the desired menu item and press OPEN. The symbol turns to. The parameters can now be changed. Press OPEN to confirm or CLOSE to cancel. The symbol will return to. Self Act After the camera performs its self-check the unit operates according to this menu. The starting time is determined by the set Leisure Time. Camera Pan Shortcut Key Self act Nothing Leisure Time 030 Alarm Set Degree ON Nothing Without self act Home Home Place A Scan Auto Scan P Scan 3 Tour 3 P Scan 2 Tour 2 P Scan 1 Tour 1 The Self Act Menu is found under the Main Menu. Move the cursor to Self act and press OPEN. The symbol turns to. The parameters can now be changed. Press OPEN to confirm or CLOSE to cancel. The symbol will return to. Leisure Time 12

13 If the Leisure Time reached the previous set value after manual operation the unit will automatically run according to Self Act (except when Self Act is set to Noting ). If the parameter in Self Act is Home Place the user must ensure that Home Place is on. The value of Leisure Time can be set from 1 to 240. Camera Pan Shortcut Key Self act Nothing Leisure Time 030 Alarm Set Degree ON The Leisure Time Menu is found under the Main Menu. Move the cursor to Leisure Time and press OPEN. The symbol turns to. The parameters can now be changed. Press OPEN to confirm or CLOSE to cancel. The symbol will return to. Alarm Set Through Alarm Set the user can set the alarm mode and relay output. The Alarm Set Menu is found under the Main Menu. Move the cursor to Alarm Set and press OPEN to enter the sub-menu. Move the joystick up or down to enter additional menu pages. Camera Pan Shortcut Key Self act Nothing Leisure Time 030 Alarm Set Degree ON Diagram: 2.f. Alarm1 mode Alarm2 mode Alarm3 mode Alarm4 mode Alarm5 mode Alarm6 mode Alarm7 mode Alarm1 set Alarm2 set Alarm3 set Alarm4 set Alarm5 set CLOSE CLOSE CLOSE CLOSE CLOSE CLOSEF CLOSE AUX1 AUX1 AUX1 AUX1 AUX1 Parameters for Alarm Mode are either OPEN or CLOSE. Parameters for AlarmXSet are AUX1(AUX2) Alarm Output Set AUX1 (AUX2) Alarm Mode CLOSE = The alarm works when the alarm input terminal and GND are open circuited. The AUX 1 relay is closed when there is an alarm and opened when there are no alarms. The setup of AUX2 is the same as AUX1. Alarm Mode OPEN = The alarm works when the alarm input terminal and GND are short-circuited. The AUX 1 relay is open when there is an alarm and closed when there are no alarms. The setup of AUX2 is the same as AUX1. Note: The maximum relay output is Once in the Alarm Mode/Alarm Set Sub-Menu press OPEN. The symbol turns to 13. The

14 parameters can now be changed. Press OPEN to confirm or CLOSE to cancel. The will return to. symbol Degree The Degree Menu is found under the Main Menu and is used to display the pan degree on the monitor. Move the cursor to Degree and press OPEN. The symbol turns to. The parameters can now be changed to OFF or ON. Press OPEN to confirm or CLOSE to cancel. 7. TROUBLESHOOTING a. No picture after applying power (i) check all plugs and cables are securely connected to the proper connectors; (ii) ensure your power supply is providing the correct voltage and current. b. The picture has ripples (i) check to see if the power supply is experiencing AC ripple, if so a filter may be required; (ii) determine if the monitor is faulty; (iii) determine if other peripheral equipment is causing ripple and if so make the necessary adjustments. c. The picture background continuously changes color a fluorescent lamp s magnetic field may cause color roll, therefore, reduce the number of fluorescent lamps or increase the distance between the camera and the lamps. d. The picture appears smeared (i) the power supply voltage level may be unstable, therefore, try another power supply; (ii) ensure the cables are correctly connected and/or the cables are of the correct impedance. e. Other interference may require a SecurityTronix ground loop isolation filter. f. Power is on, but the controller does not work (i) check to make sure the DIP switches for address and communications baud rate are properly set, (ii) check to ensure the RS485 connections at the camera and the PTZ Controller have the same polarity, (iii) check the integrity and continuity of the unshielded twisted pair (UTP) control cable. g. Additional troubleshooting assistance can be found on-line at in addition to support from SecurityTronix sales engineers at APPENDIX A CAMERA ADDRESS SETTING USING 8-DIGIT DIP SWITCH SW2 14

15 CAM ID OFF OFF OFF OFF OFF OFF OFF ON 2 OFF OFF OFF OFF OFF OFF ON OFF 3 OFF OFF OFF OFF OFF OFF ON ON 4 OFF OFF OFF OFF OFF ON OFF OFF 5 OFF OFF OFF OFF OFF ON OFF ON 6 OFF OFF OFF OFF OFF ON ON OFF 7 OFF OFF OFF OFF OFF ON ON ON 8 OFF OFF OFF OFF ON OFF OFF OFF 9 OFF OFF OFF OFF ON OFF OFF ON 10 OFF OFF OFF OFF ON OFF ON OFF 11 OFF OFF OFF OFF ON OFF ON ON 12 OFF OFF OFF OFF ON ON OFF OFF 13 OFF OFF OFF OFF ON ON OFF ON 14 OFF OFF OFF OFF ON ON ON OFF 15 OFF OFF OFF OFF ON ON ON ON 16 OFF OFF OFF ON OFF OFF OFF OFF 17 OFF OFF OFF ON OFF OFF OFF ON 18 OFF OFF OFF ON OFF OFF ON OFF 19 OFF OFF OFF ON OFF OFF ON ON 20 OFF OFF OFF ON OFF ON OFF OFF 128 ON OFF OFF OFF OFF OFF OFF OFF 129 ON OFF OFF OFF OFF OFF OFF ON 130 ON OFF OFF OFF OFF OFF ON OFF 131 ON OFF OFF OFF OFF OFF ON ON 132 ON OFF OFF OFF OFF ON OFF OFF 133 ON OFF OFF OFF OFF ON OFF ON 134 ON OFF OFF OFF OFF ON ON OFF 250 ON ON ON ON ON OFF ON OFF 251 ON ON ON ON ON OFF ON ON 252 ON ON ON ON ON ON OFF OFF 253 ON ON ON ON ON ON OFF ON 254 ON ON ON ON ON ON ON OFF 255 ON ON ON ON ON ON ON ON 15