Solid-State Memory Camcorder

Transcription

1 (1) Solid-Stte Memory Cmcorder PMW-F55 PMW-F5 Operting Instructions Softwre Version 8.0 Before operting the unit, plese red this mnul thoroughly nd retin it for future reference Sony Corportion

2 Tble of Contents Overview Fetures... 6 System Configurtion... 9 Loction nd Function of Prts On-Screen Indictions Sub Disply Screen Viewfinder Screen Preprtions Power Supply Using Bttery Pck Using AC Power (DC IN Power) Setting the Clock Attching Optionl Devices Attching Lens Attching Viewfinder Setting the Bsic Action System Frequency Shooting Mode Min Recorded Signl Color Spce Imger Scn Mode Recording Formt Using SxS Memory Crds About SxS Memory Crds Inserting n SxS Memory Crd Removing n SxS memory crd Switching Between SxS Memory Crds Formtting n SxS Memory Crd Checking the Remining Time Avilble for Recording Restoring n SxS Memory Crd Using n SD Crd Usble SD Crds Inserting n SD Crd Removing n SD memory crd Formtting n SD Memory Crd Tble of Contents

3 Checking the Remining Time Using n AXS-R5/R Attching the AXS-R5/R Removing the AXS-R5/R Inserting n AXS Memory Crd Removing n AXS Memory Crd Recording to n AXS Memory Crd Recording 4K 120FPS with the AXS-R Formtting n AXS Memory Crd Checking the Remining Time Avilble for Recording Restoring the AXS Memory Crd Using USB Wireless LAN Module Attching the IFU-WLM Mking Wi-Fi Connection Using the Wi-Fi Remote Commnder Recording Bsic Opertion Procedure Chnging Bsic Settings Electronic Shutter Sensitivity/Gin/Color Temperture/White Blnce Audio Time Dt Useful Functions Assignble Buttons Slow & Quick Motion Recording Time-lpse Video (Intervl Rec Function) Strting to Record from Pre-stored Video (Picture Cche Function) Simultneously Recording Rec Review Focus Mgnifier Flse Color Disply Viewfinder Double Speed Drive Function Thumbnil Screens Thumbnil Screens Configurtion of the Screen Plying Clips Tble of Contents 3

4 Plying the Selected nd Subsequent Clips in Sequence Clip Opertions Opertions of the Thumbnil Menu Displying the Detiled Informtion of Clip Copying MPEG2 Proxy Dt (PMW-F55 nd PMW-F5 + CBKZ-55FX) Deleting Clips Chnging Informtion on the Thumbnil Screen Settings Sub Disply Opertion Sub Disply Setting Items CAMERA Screen FILE Screen AU/TC (udio/timecode) Screen Quick Menu Opertion Quick Menu Setting Items Project ctegory Monitoring ctegory MLUT ctegory Medi ctegory Viewfinder ctegory Others ctegory Setup Menu Opertions User Menu Setup Menu List Cmer Menu Pint Menu Audio Menu Video Menu VF Menu TC/UB Menu Recording Menu Medi Menu File Menu Mintennce Menu System Menu Externl Devices Connection Connecting Externl Monitors nd Recording Devices Operting Clips With Computer Tble of Contents

5 Externl Synchroniztion Appendices Importnt s on Opertion Formts nd Limittions of Outputs Video Formts nd Output Signls Error/Wrning Indictions Error Indictions Wrning Indictions Cution nd Opertion Confirmtion Indictions Items Sved in the File Licenses MPEG-4 Visul Ptent Portfolio License MPEG-4 AVC Ptent Portfolio License On ccessing softwre to which the GPL/LGPL pplies Open softwre licenses Specifictions Generl Cmer Section Input/Output Medi Pckge Configurtion Optionl Accessories Index Tble of Contents 5

6 Overview Overview Fetures The PMW-F55/F5 is highly compct, lightweight nd high-performnce CineAlt 4K cmer with 4K Super 35mm equivlent Singlechip CMOS imge sensor. The PMW-F55 s CMOS imge sensor with frme imge scn function llows you to shoot cler 4K imges without rolling shutter distortion or flsh bnd phenomenon, for perfect HD recording performnce. The PMW-F5 s 4K imge sensor llows you to record high qulity HD pictures. You cn record in SR SStP/MPEG2 HD video formt, in ddition to the new 4K-comptible formt, XAVC, by using n SxS memory crd. 4K RAW dt cn be recorded by using the portble memory recorder, AXS-R5/AXS-R7, which dopts the newly developed ccess memory crd (AXSM). The cmcorder dopts the sme ntive FZ mount used by the PMW-F3. You cn use vriety of cine lenses (PL mount) so tht the PL/FZ conversion dptor comes stndrd. By using the optionl LA-FZB1/LA-FZB2 mount dpter, the B4 lens tht is widely used for brodcsting cn be ttched. You cn use your lens librries with this cmcorder. Comptible with multi formt The cmcorder is comptible with the new formt, XAVC (officil nme: MPEG4 AVC/ H.264 Hi422 Profiles/Level 5.2), nd cn record 4K: , QFHD: , 2K: , HD: The cmcorder is lso comptible with frme rtes from 23.98P to 59.94P. For high-speed shooting, you cn record 1 fps to 60 fps for XAVC recording in the S & Q mode. The recommended medi for XAVC recording is the newly developed SxS PRO+ memory crd. The cmcorder is lso comptible with SStP SR- SQ 444, SR-SQ 422, nd SR-Lite 422 tht re dopted for HDCAM-SR, or MPEG2 HD 422 tht is dopted for XDCAM. Your workflow cn be used. If you instll the CBK-55PD to the PMW-F55/F5, you cn record in the Apple ProRes nd Avid DNxHD codec. High frme rte (HFR) recording with up to 240 FPS Using the cmcorder with the AXS-R5/AXS-R7 llows you to perform 2K RAW recording with up to 240 FPS. You cn use 2K/HD to record up to 180 FPS to the SxS memory crd on the cmcorder without the AXS-R5/AXS-R7. The cmcorder hs two scn modes for high frme rte. In the first mode, you cn shoot with the full ngle of the CMOS imge sensor equivlent to the Super 35 mm size, nd use the lens with the focl length set for norml shooting of high frme rte recording. In the second mode, you cn shoot with the center re of the CMOS imge sensor equivlent to the Super 35 mm size (cut to Super 16 mm size). Modulr structure The cmcorder incorportes modulr design tht llows you to configure the cmcorder ccording to shooting circumstnces, whether for cinem production, drm, commercils, 3D shooting, documentry filming, interviews, etc. The hndle, viewfinder, udio connector pnel, RAW recorder, nd build up kit cn be ttched/ removed esily ccording to shooting requirements. The body nd hndle of the cmcorder hve multiple 1/4 nd 3/8 mount points, to which you cn ttch stndrd ccessories. Other fetures 4K Super 35mm equivlent CMOS imge sensor The cmcorder hs 4K Super 35mm equivlent Single-chip CMOS imge sensor of 11,600,000 pixels, with effective pixels count of 8,900,000, for 4K/HD recording. The CMOS imge sensor of the PMW-F55 includes frme imge scn function tht llows you to shoot cler imges without rolling shutter distortion or flsh bnd phenomenon tht occurs with trditionl film cmer. The cmcorder dopts color filter tht emphsizes color reproduction comptible with wide color re 6 Fetures

7 (exceeding tht of color film), llowing for ner humn vision imge representtion cpbility. Wide ltitude, low noise The cmcorder hs 14-stop ltitude tht cn reproduce imges cptured by the CMOS sensor with smooth grdtion of blck to white. Exmor Super35 CMOS technology provides low noise levels, even with 4K resolution nd 14-stop ltitude mintined. A wide vriety of recording functions The cmcorder hs the Intervl Rec function tht llows you to record frmes specified t regulr intervls nd the Cche Rec function tht llows you to begin recording specified number of seconds in dvnce of the time tht cn be used for vriety of situtions. * Nme formt: HG + 3 digits of dynmic rnge vlue + the unit digit of white limit + G + video output vlue with 18% gry crd You cn select dynmic rnge from mong 325%, 460%, nd 800%. You cn select 109% or 100% for the mximum vlue of video output (White Limit). You cn select the video output vlue with 18% gry crd from two vlues. Comptible with the next genertion wide color rnge stndrd, ITU-R BT.2020 PMW-F55 is comptible with the next genertion wide color rnge stndrd, ITU-R BT.2020, nd you cn select this when recording using XAVC 4K or QFHD. As the bove, you cn select the SDI output of the 4K/QFHD signl. Overview Video signl processing 4K/HD simultneous recording nd high-speed recording with unlimited recording time is possible with single LSI chip processing of both cmer signls nd bsebnd video signls. Single-chip design provides stble, high-speed 4K 59.94P bsebnd video processing, low power consumption, nd compct design. Gmm curves corresponding to vrious situtions The cmcorder hs vriety of gmm curves corresponding to vrious situtions. S-Log2 nd S-Log3 re equipped to cover wide ltitude of the cmcorder. The cmcorder lso hs user gmm nd hyper gmm. The user gmm cn instll nd use the gmm curve tht is mde by CvpFileEditorTM V4.2. The hyper gmm cn disply the wide dynmic rnge imges in smooth contrst without using the knee function. The PMW-F55/F5 provides the following six hyper gmm choices: Avilble hyper gmm choices No. Nme* Dynmic rnge White limit Video output with 18% gry crd (video input 20%) 1 HG3250G36 325% 100% 36% 2 HG4600G30 460% 100% 30% 3 HG3259G40 325% 109% 40% 4 HG4609G33 460% 109% 33% 7 HG8009G40 800% 109% 40% 8 HG8009G33 800% 109% 33% Monitor LUT on/off function for ech output By dividing the video output signl (including the internl recorded signl) into 3 types, you cn set Monitor LUT to on/off for ech type independently. The cmcorder hs 5 types of gmm curve nd 4 types of Look Profile for Monitor LUT preset. You cn lso use ny user LUT file tht is creted by RAW Viewer. Intuitive user interfce This cmcorder hs the color LCD pnel on the inside pnel, nd direct ccess menu tht ssigns the commonly-used settings to 6 buttons. Displying the setting informtion lrge, mkes visibility better. By switching four screens (CAMERA, FILE, AU/TC, VIEW), you cn perform setting speedy. A LOCK switch llows you to prevent chnging settings by ccident. By using the supplied IFU-WLM3 USB wireless LAN module, you cn operte the cmcorder from Wi-Fi comptible device such s tblet, with the wireless trnsmission. Assignble buttons The inside pnel hs three ssignble buttons, while the outside pnel hs one ssignble button. You cn operte the cmcorder esily by ssigning commonly-used functions to these buttons. Fetures 7

8 Overview Built-in ND filter A rotry ND filter is built into the cmcorder, nd supports three types of filter: Cler, 0.9 (1/8), nd 1.8 (1/64). This llows light djustment without the need for externl mtte box. When using B4 lens by ttching n optionl LA-FZB2 mount dpter to the cmcorder, you cn use the power opticl filter (neutrl density filter nd color temperture conversion filter) of the LA-FZB2 by setting the built-in ND filter of the cmcorder to Cler. Vrious input/output connectors Four types of SDI output The cmcorder hs four types of SDI output tht llows you to output 4K 59.94P signl s four 3G- SDI. The SDI-1/2 nd SDI-3/4 outputs re ssignble s SDI-1/2 OUT to Min, nd SDI-3/4 OUT to Sub. The cmcorder lso includes connections for Genlock IN, Timecode IN/OUT, HDMI OUT, Remote. EFP-Style build up kit Attching the ccessory kit CBK-55BK to the cmcorder improves stbility nd operbility of the shoulder cmcorder style. The CBK-55BK hs vrious udio input/output connectors, direct switches tht llow you to control the cmcorder on hnd while looking through the viewfinder when shooting with the cmcorder on your shoulder, wireless udio receiver slot, nd udio control pnel. The front control section nd shoulder pd cn be slided 70 mm (2 7 / 8 inches) in the front-to-rer direction. You cn mintin blnce esily while shooting with the cmcorder on your shoulder when the PL lens or lrge portble B4 lens is ttched. 4K upgrde license for PMW-F5 By instlling the CBKZ-55FX to the PMW-F5, 4K recording/plybck for XAVC 4K/QFHD nd 4K/QFHD output from SDI nd HDMI re vilble. 8 Fetures

9 System Configurtion This section shows exmples of the cmer system configurtion. Overview Viewfinder DVF-L350 Viewfinder DVF-L700 Viewfinder DVF-EL100 Microphone ECM-680S (EC-0.5X5F3M), ECM-678, ECM-674 Lenses PMW-F3K supplied lenses (35 mm/50 mm/85mm) SCL-PK6/F, PK6/M (set of 6 lenses, 20 mm/25 mm/35 mm/50 mm/85 mm/135 mm) SCL-PK3/F, PK3/M (set of 3 lenses, 20 mm/25 mm/135 mm) SCL-P11X15 SCL-Z18X140 Lens mount dpter PMW-F55, PMW-F5 Mount dpter LA-FZB1, LA-FZB2 Opticl 2K Filter CBK-55F2K Shoulder dptor VCT-FSA5 Remote control unit RM-B170, RM-B750, CBK-DCB01 USB wireless LAN module IFU-WLM3 (supplied) Additionl codec bord CBK-55PD 4K upgrde license (for PMW-F5) CBKZ-55FX System Configurtion 9

10 Overview SxS memory crd USB crd reder SBP-256D, SBP-128B/C/D, SBAC-US30/UT100 SBP-64A/B/C/D, SBP-32, SBS-64G1A/B, SBS-32G1A/B XQD memory crd QD-S64E, QD-S32E, QD-N64, QD-M128A, QD-M64A, QD-M32A, QD-G128A/E, QD-G64A/E, QD-G32A/E (QDA-EX1 XQD ExpressCrd dpter is required.) Bttery dptor Bttery pck BP-FL75, BP-FLX75 PMW-F55, PMW-F5 Portble memory recorder AXS-R5, AXS-R7 AC dptor AC-DN2B, AC-DN10 AXS memory crd AXS-512S24*, AXS-A256S24, AXS-A512S48, AXS-A512S24, AXS-A1TS48, AXS-A1TS24 AXS memory crd reder AXS-CR1 Cmer system dptor CA4000 EFP style buildup kit CBK-55BK Monitor: BVM series, PVM series, LMD series * Not comptible with the AXS-R7. 10 System Configurtion

11 Loction nd Function of Prts For functions nd usge, see the pges in prentheses. Overview The following illustrtions re with the bttery dptor (pge 16) removed. For removing the bttery dptor, see Removing bttery pck (pge 23) Hndle 2. LOCK switch Disbles opertions on the side operting pnel. 3. Viewfinder shoe 4. Tpe mesure hook/imge sensor position index The mrk nd tpe mesure hook re on plne with the imge sensor. To mesure the precise distnce between the cmcorder nd the subject, use this mrk or tpe mesure hook s reference. You cn ttch the end of tpe mesure to the hook, nd mesure the distnce from the subject. The tpe mesure hook cn be ttched to the inside prt or outside prt of the cmcorder. 5. Flnge focl length djustment screw (pge 26) 6. Lens mount (pge 25) 7. REC (recording strt/stop) button/lmp (pge 41) 8. SEL/SET (select/set) dil (MENU dil) (pges 53, 58, 67) Sub disply/control buttons block (pge 14) SxS memory crd slot block (pge 14) Right side connector pnel (pge 14) Selects the item in the menu or chnges the setting vlue. 9. ND FILTER select switch ND filters re vilble for keeping the perture in proper rnge. Select the ND filter by turning the ND FILTER select switch while pulling it. Cler: ND filter not used 0.9: 1 / 8 ND 1.8: 1 / 64 ND 10. CANCEL/BACK button (pges 53, 58, 67) 11. Accessory mounting screw holes Type of screw: 1/4-20UNC ( 4) Type of screw: 3/8-16UNC ( 5) Length of enggement: 9 mm ( 3 / 8 inch) or less Do not pply excessive force to the mounted ccessory. It my dmge the screw thred. 12. ASSIGN (ssignble) 1/2/3 buttons (pge 44) Loction nd Function of Prts 11

12 Overview 13. Built-in speker (pge 41) 14. Power switch Set to the ON position (=) to turn the power on. Set to the OFF position (1) to turn the power off. s This cmcorder uses smll mount of stndby power even when the power switch is set to OFF. Remove the bttery pck if the cmcorder will not be used for prolonged period. When removing the bttery pck or the DC IN power, be sure to first set the power switch to the OFF position. Removing the bttery pck or the DC IN power while the cmcorder is ON my cuse dmge to the cmcorder or the memory crd. 15. BRIGHTNESS button Adjusts brightness of the sub disply in 4 steps. 16. STATUS (sttus disply on/off) button Displys sttus screens on the viewfinder or externl video monitor. Turn the MENU dil (pge 11) to switch the screens in sequence. Tip Items in [ ] re displyed when the CBK-55BK is ttched. Cmer sttus screen Displys the electronic shutter settings or the sttus of the lens. Gin Shutter Gmm White Zebr1 Zebr2 [Gin/El Switch <L>] [Gin/El Switch <M>] [Gin/El Switch <H>] Iris Focl Length Focus Distnce Depth Of Field Opticl Filter Amount of gin up (db) or sensitivity (ISO-EI) Electronic shutter settings Gmm ctegory nd curve (When Shooting Mode is set to Cine EI, Gmm for MLUT Off is displyed.) White blnce mode nd setting On/off nd setting level of Zebr1 On/off nd setting level of Zebr2 Setting level of the gin switch L on the CBK-55BK Setting level of the gin switch M on the CBK-55BK Setting level of the gin switch H on the CBK-55BK T vlue of iris Focl length (mm) Focus distnce (m/feet) Depth of field (m/feet) Type of opticl filter Audio sttus screen Displys the input settings for ech chnnel, udio level meter, nd wind filter setting. Level Level meter Source Input source Reference Reference level setting Wind Filter Wind filter setting System sttus screen Displys the video signl settings. System Frequency System frequency Rec Formt Recording formt tht is recorded on the SxS memory crd Picture Size Picture size tht is recorded on n SxS memory crd Rec Function Specil recording tht is set to on, nd its setting Gmm Gmm ctegory tht is recorded on the SxS memory crd Imger Scn Imger reding mode Picture Cche Rec MPEG2 Proxy Option On/off setting of Picture Cche Rec On/off setting of MPEG2 proxy (PMW-F55 nd PMW- F5 + CBKZ-55FX) Attched option Video output sttus screen Displys the video output settings of SDI 1 to SDI 4, HDMI, nd test video output. Picture size C.Spce Freq Gmm Output picture size Output form Output rte Gmm Assignble button sttus screen Displys the function tht is ssigned to ech ASSIGN button. 1 to 4 ([5] to [8]), Lens RET Menu Dil Assign Functions tht re ssigned to the Assign 1 to 4 ([5] to [8]) buttons nd RET button on lens Functions tht re ssigned to the Menu dil Bttery sttus screen Displys informtion of the bttery or DC IN power. Detected Bttery Bttery type Remining Remining chrge level (%) Chrge Count Number of times tht the bttery is chrged Cpcity Remining cpcity (Ah) 12 Loction nd Function of Prts

13 Voltge Voltge (V) Mnufcture Dte Mnufcture dte of the bttery Power Source Power source Supplied Voltge Supplied voltge Medi sttus screen Displys the remining spce, vilble recording time, nd estimted service life of the recording medi (SxS memory crd A/SxS memory crd B/SD crd/axs memory). Protect informtion Remining Life Remining spce nd vilble recording time Estimted service life When the AXS-R7 is ttched, the ctive medi informtion of AXS(A) or AXS(B) is displyed. 17. OPTION button (pges 50, 58) 18. MENU (menu disply on/off) button (pge 67) Overview Air outlet Air inlet Audio connector pnel (pge 15) 6 1. Accessory mounting screw holes Type of screw: 1/4-20UNC ( 4) Length of enggement: 9 mm ( 3 / 8 inch) or less s Do not pply excessive force to the mounted ccessory. It my dmge the screw thred. When ttching n ccessory, do not cover the ir inlet or ir outlet. 2. HDMI OUT connector (pge 111) 3. DC IN connector (pge 24) 4. SDI OUT 1 to 4 (seril digitl output) connectors (BNC type) (pge 111) 5. Mounting terminl for n expnsion unit (pges 23, 33) Left side connector pnel (pge 16) 6. REMOTE (remote control) connector (8- pin) Connect n externl device such s remote control unit. 7. USB wireless LAN module retrcting prt (pge 36) Connecting the supplied IFU-WLM3 USB wireless LAN module llows communiction with wireless LAN devices. 8. Tpe mesure hook/imge sensor position index The mrk nd tpe mesure hook re on plne with the imge sensor. To mesure the precise distnce between the cmcorder nd the subject, use this mrk or tpe mesure hook s reference. You cn ttch the end of tpe mesure to the hook, nd mesure the distnce from the subject. Loction nd Function of Prts 13

14 Overview 9. VF (viewfinder output) connector (pge 26) 10. ASSIGN 4 (ssignble 4) button (pge 44) Sub disply/control buttons block (pges 53, 58) Right side connector pnel The USB connector nd SD crd slot re locted behind the cover. 1 Open the 1 cover Open the cover Sub disply 2. Function buttons CAMERA button FILE button AU/TC (udio/time code) button VIEW button 3. Item button 1. Hedphones connector (stereo mini jck) (pge 41) 2. USB connector (A) 3. USB connector (Mini B) 4. ACCESS (SD crd ccess) lmp (pge 32) 5. SD crd slot (pge 32) SxS memory crd slot block (pge 29) The SxS memory crd slots re locted behind the cover. 1 2 Open the cover SLOT SELECT (SxS memory crd select) button 2. ACCESS (SxS memory crd ccess) lmps 3. SxS memory crd slots 4. EJECT (SxS memory crd eject) buttons 14 Loction nd Function of Prts

15 Audio connector pnel Attch the supplied udio connector pnel s follows Overview s Attch/remove the udio connector pnel while the cmcorder is turned off. When ttching the udio connector pnel, mke sure not to ctch the cp. When removing the udio connector pnel, pull it wy slowly from the body of the cmcorder, s shown in the digrm bove. Applying excessive force to remove the udio connector pnel my dmge it. 1. AUDIO IN CH1/AUDIO IN CH2 (externl udio input selection) switches Switch input signl (externl microphone, externl udio device, etc.). LINE: Line input udio equipment AES/EBU: AES/EBU formt udio signl MIC: Microphone input 2. AUDIO IN (CH-1, CH-1/2) /AUDIO IN (CH-2, CH-3/4) connectors Input externl microphone or udio equipment signls. 3. CH1 MIC +48V/OFF, CH2 MIC +48V/ OFF (externl microphone input selection) switches Supply phntom power (48 V) to the externl microphone when you set this switch to MIC +48V. Settings of the AUDIO IN CH1/AUDIO IN CH2 switch nd recorded chnnels re s below. AUDIO IN CH1/CH2 switch Recorded chnnel CH-1 CH-2 CH-1 CH-2 CH-3 CH-4 LINE/MIC LINE/MIC LINE1/MIC1 LINE2/MIC2 No sound No sound AES/EBU LINE/MIC AES/EBU1-1 AES/EBU1-2 No sound No sound LINE/MIC AES/EBU LINE1/MIC1 No sound AES/EBU2-1 AES/EBU2-2 AES/EBU AES/EBU AES/EBU1-1 AES/EBU1-2 AES/EBU2-1 AES/EBU2-2 LINE1/MIC1: LINE or MIC signl tht is input to CH-1 LINE2/MIC2: LINE or MIC signl tht is input to CH-2 AES/EBU1-x: Chnnel x signl of the AES/EBU signl tht is input to CH-1 AES/EBU2-x: Chnnel x signl of the AES/EBU signl tht is input to CH-2 Loction nd Function of Prts 15

16 Overview Left side connector pnel Do not pply excessive force to the mounted ccessory. It my dmge the screw thred. Bttery dptor For ttching/removing the bttery dptor, see Using Bttery Pck (pge 23) TC IN/OUT (timecode input/output selection) switch (pge 114) 2. TC (timecode input/output) connector (BNC type) (pge 114) 3. GENLOCK IN connector (BNC type) (pge 114) 4. TEST OUT (nlog video output) connector (BNC type) (pge 111) 5. SHUTTER connector (BNC type) Not used for this version. Bottom Relese button/ejection lever 2. Bttery relese lever 3. Expnsion IF connector 4. DC OUT 1/2 connector When connecting device, use one with current consumption of 1.8 A or less. 5. Bttery pck ttching prt 6. DC IN connector (pge 24) 7. DC OUT overcurrent indictor Lights when the overcurrent protection ctivtes. In this cse, disconnect ny peripherl device from DC OUT connector whose indictor is lit, then restrt the PMW-F55/F Accessory mounting screw holes Type of screw: 1/4-20UNC ( 3) Type of screw: 3/8-16UNC ( 3) Length of enggement: 9 mm ( 3 / 8 inch) or less 16 Loction nd Function of Prts

17 On-Screen Indictions Sub Disply Screen Overview When turning on the cmcorder, the sub disply ppers nd you cn check the sttus of the cmcorder nd set the bsic items. The screen is switched by pressing the function button on the left of the sub disply (pge 14). Item nme/ Setting vlue/ Function disply screen Sttus screen Item nme/setting vlue/function disply screen CAMERA-1 (pge 54) 1. FPS Displys nd sets Slow & Quick Motion/ Frme Rte. 2. Shutter Displys nd sets shutter speed/ngle. 3. Color Temp Displys nd sets color temperture. 4. Sensitivity/Gin/Exposure Index Displys nd sets sensitivity/gin (ISO/dB/ EI). 5. Gmm/High Ltitude Displys nd sets gmm ctegory. (When Shooting Mode (pge 104) is set to Cine EI, High Ltitude is displyed.) 6. MLUT Displys nd sets monitor LUT/Look Profile. The MLUT indiction ppers only when Shooting Mode (pge 104) is set to Cine EI. CAMERA-2 (pge 55) 1. Color Brs Turns the color brs on/off. 2. Auto White Performs the uto white blnce function. 3. Auto Blck Performs the uto blck blnce function. 4. Sub&HDMI Turns the Monitor LUT of SDI (Sub) nd HDMI output on/off. 5. Viewfinder Turns the Monitor LUT of viewfinder output on/off. On-Screen Indictions 17

18 Overview 6. SDI (Sub) Disp. Turns the function tht outputs the chrcter informtion to the SDI (Sub) output on/off. FILE-1 (pge 56) 1. to 6. All File Lod 1 to 6 Lods the All file (1 to 6) from the SD crd. FILE-2 (pge 56) 1. to 6. Scene Recll 1 to 5/Stndrd Lods the Scene file (1 to 5, or Stndrd) from the internl memory. FILE-3 (pge 56) 1. to 6. Lens Recll 1 to 6 Lods the Lens file (1 to 6) from the internl memory. AU/TC-1 (pge 56) 1. MIC CH1 Ref Displys/sets the reference input level for MIC CH1. 2. CH1 Input Sets Auto/Mnul for the recording level of CH1, nd displys/sets the level for Mnul setting. 3. CH1 Select Displys the input source for CH1. 4. MIC CH2 Ref Displys/sets the reference input level for MIC CH2. 5. CH2 Input Sets Auto/Mnul for the recording level of CH2, nd displys/sets the level for Mnul setting. 6. CH2 Select Displys the input source for CH2. AU/TC-2 (pge 57) 3. Monitor CH Displys/sets the udio chnnel tht is output to the hedphones nd speker. 5. Monitor Level Displys/sets the monitor volume tht is output to the hedphones nd speker. AU/TC-3 (pge 57) 1. Disply Displys/sets the time dt. 2. Reset Resets the timecode nd counter. 3. Set Sets the timecode. 4. Mode Sets the timecode mode. 5. Run Sets the condition for the timecode. 6. TC Source Displys the externl lock sttus for the timecode. VIEW-1 1. F Rev m Fst reverse 2. Ply/Puse BX Ply/puse 3. F Fwd M Fst forwrd 4. Prev. Previous clip jump 5. Stop x Stop 6. Next > Clip directionl jump VIEW-2 1. Thumbnil Displys or cncels the disply of the thumbnil screen. 2. Up M Moves the cursor up. 3. Set Confirms the selected item. 4. Left < Moves the cursor to the left. 5. Down m Moves the cursor down. 6. Right, Moves the cursor to the right. 18 On-Screen Indictions

19 Sttus screen Overview 1. Specil recording/opertion sttus indiction zrec Stby zs&q Rec S&Q Stby zhfr Rec HFR Stby zint Rec Int Stby zint Stby zcche Recording in progress Stndby for recording Slow & Quick Motion recording in progress Stndby for Slow & Quick Motion recording Slow & Quick Motion nd Hi Frme Rte mode recording in progress Stndby for Slow & Quick Motion nd Hi Frme Rte mode recording Recording in progress in Intervl Rec mode Stndby for Intervl Rec recording Witing for Intervl Rec picture cpturing z lights in green: Stndby for Picture Cche Rec mode z lights in red: Recording in progress in Picture Cche Rec mode 6. Clip nme indiction (pge 99) While recording: Displys Clip: clip nme when Mode in Clip Nming of the Medi menu is set to Title, or Reel: Cmer ID + Reel Number nd Shot: Cmer Position + Shot Number when Mode in Clip Nming of the Medi menu is set to Cm ID + Reel#. While plying/displying the thumbnil screen: Displys Clip: clip nme. 7. AXS memory sttus/remining spce indiction (pge 35) 8. A/B slot medi sttus/remining spce indiction (pge 31) 9. Recording formt (codec) indiction (pge 28) Displys the formt tht is recorded on n SxS memory crd or n AXS memory crd. 10. Audio level meter (4CH) 2. Bttery remining chrge/dc IN voltge indiction (pge 24) 3. Recording formt (picture size) indiction (pge 28) Displys the picture size tht is recorded on n SxS memory crd or n AXS memory crd. 4. System frequency nd scn method indiction (pge 27) 5. Time dt indiction (pge 44) On-Screen Indictions 19

20 Viewfinder Screen Overview While recording, stnding by to record, or plybck, the sttuses nd settings of this unit re superimposed on the viewfinder screen. The sttuses nd settings of this unit cn be turned on/off using the setup menu or by the ssignble button. The sttuses nd settings of this unit cn be independently turned on/off (pge 93). To turn on/off on the setup menu Turn on/off the sttuses nd settings of this unit on Setting in Disply On/Off (pge 93) of the VF menu. To turn on/off by the ssignble button Assign Disply to one of the ssignble buttons (pge 44). You cn turn on/off the sttuses nd settings of this unit by pressing the ssignble button. Tip When using the 1.3 or 2 nmorphic lens, set Aspect in VF Setting (pge 91) of the VF menu to Anmo 1.3 or Anmo 2 to disply the norml imge without distortion on the viewfinder screen. Informtion displyed on the screen while recording 1. Shutter mode/shutter speed indiction (pge 75) 2. ND filter indiction (pge 11) 3. Gin indiction (pge 72) Displyed s the EI vlue when Shooting Mode in Bse Setting (pge 104) of the System menu is set to Cine EI. 4. Specil recording/opertion sttus indiction zrec Stby zs&q Rec S&Q Stby Recording in progress Stndby for recording Slow & Quick Motion recording in progress Stndby for Slow & Quick Motion recording zhfr Rec HFR Stby zint Rec Int Stby zint Stby zcche Slow & Quick Motion nd Hi Frme Rte mode recording in progress Stndby for Slow & Quick Motion nd Hi Frme Rte mode recording Recording in progress in Intervl Rec mode Stndby for Intervl Rec recording Witing for Intervl Rec picture cpturing z lights in green: Stndby for Picture Cche Rec mode z lights in red: Recording in progress in Picture Cche Rec mode 20 On-Screen Indictions

21 5. Color temperture indictions (pge 70) 6. S&Q motion frme rte/intervl Rec indiction (pges 76, 95) Displys the intervl time setting or time until the next recording, during Intervl Rec. 7. Bttery remining chrge/dc IN voltge indiction (pge 24) 8. Focus position indiction Displys focus position (only when lens tht is comptible with the focus setting disply function is ttched). 9. Zoom position indiction Displys zoom position in the rnge of 0 (wide position) to 99 (tele position) (only when lens tht is comptible with the zoom setting disply function is ttched). 10. Iris position indiction Displys iris position (only when lens tht is comptible with the iris setting disply function is ttched). 11. Auto iris level indiction Displyed when Level in Auto Exposure (pge 76) of the Cmer menu is set to vlue other thn ± White blnce mode indiction (pge 70) W:P W:M Preset mode Memory mode 13. Control sttus of SDI output indiction (pge 88) 14. SD crd indiction 15. Time dt indiction (pge 44) 16. Focus ssist indiction (pge 93) Displys the re tht detects the focus sttus ( Focus Are Mrker ) nd level br tht indictes focus sttus in the re ( Focus Assist Indictor ). 17. Clip nme indiction (pge 42) 18. Audio level meter 19. AXS memory sttus/remining spce indiction (pge 35) When the left side of the icon is ornge, recording is possible. When the green lmp on the upper right of the icon lights, plybck is possible. When the AXS-R7 is ttched, the ctive medi informtion of AXS(A) or AXS(B) is displyed. 20. A/B slot medi sttus/remining spce indiction (pge 31) When the left side of the icon is ornge, recording is possible. When the green lmp on the upper right of the icon lights, plybck is possible. 21. Video signl indiction (pge 93) Displys the wveform, vector scope, nd histogrm. 22. Wi-Fi connection sttus indiction (pge 36) Appers when Wi-Fi (pge 110) is set to Enble. 23. Wireless receiver reception level When n UHF portble tuner is instlled to the buildup kit CBK-55BK (optionl) ttched to the cmcorder, W ppers together with four segment reception level indictors for ech of the chnnels (1 to 2) tht cn be used by the tuner. The indictions re s follows. In the norml sitution: The number of segments indictes the strength of the signl level. Muting: The number of trnsflective segments indictes the strength of the signl level. Reception level over pek: P is displyed insted of the indictors.* Tuner bttery is low: The chnnel number nd indictor of the corresponding chnnel flsh.* * For DWR-S02D only 24. Timecode externl lock indiction When the unit is locked to the timecode of n externl device, Ext-Lk ppers. 25. Gmm/Monitor LUT indiction (pges 79, 89) Displys the gmm setting vlue. When Shooting Mode (pge 104) is set to Cine EI, gmm for picture tht is recorded on n SxS memory crd or the Monitor LUT setting ppers. 26. Simultneous recording sttus indiction (pge 46) M-Proxy: Displyed when the function of simultneous recording on one memory crd is effective. 27. Recording formt (codec) indiction (pge 28) Displys the formt tht is recorded on n SxS memory crd or n AXS memory crd. 28. System frequency nd scn method indiction (pge 27) Overview On-Screen Indictions 21

22 Overview 29. Recording formt (picture size) indiction (pge 28) Displys the picture size tht is recorded on n SxS memory crd or n AXS memory crd. Displys the imger scn mode (2KF: 2K Full, 2KC: 2K Center) on the left side of the picture size. Displys imger scn mode only when recording only RAW formt. Displys the reding mode of the imger nd picture size of the SxS memory crd when recording to n AXS nd n SxS memory crd simultneously. Informtion displyed on the plybck screen The following informtion is superimposed on the plybck picture. 1. Clip no./totl number of clips 2. Plybck mode 3. Plybck formt (picture size) 4. Bttery chrge remining/dc IN voltge 5. Plybck formt (frme rte) 6. Time dt You cn switch between timecode nd durtion by using TC Disply (pge 94) in the TC/UB menu. 7. Audio levels The udio levels for the recording re displyed. 8. Clip nme 9. Medi A mrk ppers to the left if the memory crd is write-protected. 10. Plybck formt (codec) 22 On-Screen Indictions

23 Preprtions Power Supply You cn use bttery pck or AC power vi n AC dptor. For sfety, use only the Sony bttery pcks nd AC dptors listed below: Lithium-ion Bttery Pck BP-FL75 BP-FLX75 AC Adptor AC-DN2B AC-DN10 Insert the projection of the bttery dptor into the slot on the rer of the cmcorder (1), then lower the ejection lever (2). Preprtions Using Bttery Pck Attching bttery pck 1 Attch the bttery dptor (supplied) to the cmcorder. Press the relese button (1) of the bttery dptor to pop up the ejection lever, then rise the ejection lever (2). s Before ttching the bttery dptor, mke sure tht the ejection lever is rised. Before lowering the ejection lever, mke sure tht the four hooks re ttched securely. If the four hooks re not ttched securely, it my cuse the connection to be poor or dmge the cmcorder nd bttery dptor. Bttery relese lever Bttery pck ttching prt 2 Attch bttery pck to the bttery dptor. Insert the bttery pck into the bttery pck ttching prt of the bttery dptor, then slide the bttery pck down to lock it in plce. s Before use, chrge the bttery pck with the bttery chrger. A wrm bttery pck immeditely fter use my not be ble to be fully rechrged. Removing bttery pck Unlock the bttery pck by sliding it up while pressing the bttery relese lever, then remove it. Press the relese button nd rise the ejection lever, then remove the bttery dptor by pulling it out while sliding upwrd. Remove the bttery dptor while supporting the cmcorder by hnd. Power Supply 23

24 Preprtions Checking remining bttery chrge When recording or plybck is in progress on the bttery pck, n icon to show the current bttery remining time nd bttery voltge re displyed on the sub disply screen (pge 17) nd viewfinder screen (pge 20). Icon Remining chrge 100% to 91% 90% to 71% 70% to 51% 50% to 31% 30% to 11% 10% to 0% The cmcorder indictes the remining usge time in minutes by clculting the vilble time with the bttery pck if opertion is continued t the current rte of power consumption. If the remining bttery chrge becomes low If the remining bttery chrge decreses to certin level during opertion, low-bttery messge, flshing of the REC lmp, nd beep sound will wrn you. If the remining chrge further decreses to level t which opertion cnnot be continued, bttery-empty messge ppers. Replce the bttery pck with one tht is fully chrged. To chnge the messge levels These settings cn be chnged with Bttery Alrm (pge 108) in the System menu. Setting the Clock When you turn the cmcorder on for the first time fter purchsing or replcing the bckup bttery, the Initil Setting disply ppers on the viewfinder screen. Set the dte nd time of the built-in clock, using this disply. Time Zone The vlue shows the time difference from UTC (Coordinted Universl Time). Chnge the setting if needed. Setting the time nd dte Turn the MENU dil (pge 11) to move the cursor, then press the MENU dil to set ech menu item. When you press the MENU dil when the cursor is on Finish, the setting disply disppers, the clock setting is completed. After the setting disply disppers, Clock Set (pge 109) in the System menu cn be used to set Time Zone nd dte/time. s If the clock setting is clered becuse the bckup bttery fully dischrged when no power ws supplied (no bttery pck nd no DC IN connection), the Initil Setting disply will be displyed when you next turn the cmcorder on. While the Initil Setting disply is shown, no other opertion, except turning the power off, is permitted until you finish the setting for this disply. Using AC Power (DC IN Power) The cmcorder works with AC power by using the AC dptor AC-DN2B/AC-DN10 (optionl) nd DC cble CCDD-X2 (optionl). 24 Setting the Clock

25 Attching Optionl Devices Attching Lens Recommended lenses PMW-F3K supplied lenses (35 mm/50 mm/85 mm) SCL-PK6/F, SCL-PK6/M (set of 6 lenses, 20 mm/25 mm/35 mm/50 mm/85 mm/135 mm) SCL-PK3/F, SCL-PK3/M (set of 3 lenses, 20 mm/25 mm/135 mm) SCL-P11X15 SCL-Z18X140 For detils bout vilble lenses for the cmcorder, contct Sony service representtive. Attching PL mount lens 1 Remove the mount cover from the lens mount by turning the PL mount lever counterclockwise. PL mount lever Turn the PL mount lever counterclockwise to the stopper position. Preprtions Cution Do not leve the lens fcing the sun. Direct sunlight cn enter through the lens, be focused in the cmcorder, nd cuse fire. s Attch/remove lens while the cmcorder is turned off. A lens is precision prt. Do not plce the lens directly with the mount prt down. Attch the cover supplied with the lens. The lens interfce of the cmcorder is set to Type C, to correspond with the lens tht is supplied with the PMW-F3K, SCL-P11X15, nd lenses with Cooketype connector. When using lens with n ARRI-type connector, set Lens interfce (pge 78) in the Cmer menu to Type A. Set to Off for SCL-PK6, SCL-PK3, or other lenses. If this setting is not correct, n lert messge ppers when the cmcorder is turned on fter ttching the lens. 2 Insert the lens into the lens mount by mtching the concve prt of the lens to the locting pin on the upper right of the lens mount. 3 Fix the lens by turning the PL mount lever clockwise while holding the lens. 2 3 Do not turn the lens when ttching the PL mount lens. It my cuse dmge to the hot shoe pin. Attching Optionl Devices 25

26 To ttch n ARRI* LDS lens or Cooke/i lens Mtch the contct of the lens to the hot shoe of the cmcorder. Hot shoe for the Cooke/i lens Removing lens Remove lens with the following steps. 1 Turn the PL mount lever counterclockwise while holding the lens from underneth. Preprtions 2 Pull the lens forwrd. If nother lens will not be ttched soon, fit the concve prt of the mount cover, then fix the mount cover by turning the PL mount lever clockwise. * ARRI Group Hot shoe for the ARRI LDS lens Attching other thn PL mount lens When using n FZ mount lens or B4 lens by ttching n optionl LA-FZB1/FZB2 mount dpter, ttch it fter removing the mount dpter by turning the lens mount counterclockwise. Adjusting flnge focl length You need to djust the flnge focl length (distnce from the mounting flnge to the film plne) for the following cses. When lens is ttched for the first time. When lens is chnged. When focus is not chieved for either tele or wide ngle while using zoom lens. You cn djust the flnge focl length by turning the screw for the flnge focl length (pge 11). Use hex key (7/64) for djusting. When turning the screw to the left, the flnge focl length becomes long. When turning the screw to the right, the flnge focl length becomes short. Turn the screw slowly. s The cmcorder will not work if the screw for the flnge focl length is turned too much. Stop turning the screw when the mount of the flnge focl length no longer chnges. Approximte limit for turning the screw is 7 rottions to the right/left. Use hex key of the specified size. Otherwise, the screw hed my be dmged nd you my be unble to turn the screw. Selecting the lens file By storing the djustment vlue of the ttched lens s file, you cn esily perform djustment for the lens by loding the file. Lod the file in Lens File (pge 102) of the File menu. Controlling zoom nd focus from the externl device You cn control zoom nd focus from the optionl CBK-DCB01 by connecting the CBK- DCB01 to the REMOTE connector (pge 13) when using Sony lens SCL-Z18X140. When connecting the CBK-DCB01 to the REMOTE connector independently, set RM Common Memory in Cmer Config (pge 103) of the Mintennce menu to On. For detils regrding CBK-DCB01 tht cn be used with the cmcorder, contct Sony service representtive. Attching Viewfinder Avilble viewfinders for the cmcorder DVF-L350: LCD color viewfinder DVF-L700: LCD color viewfinder DVF-EL100: OELD color viewfinder Cution Do not leve the cmcorder with the eyepiece of the viewfinder fcing the sun. Direct sunlight cn enter through the eyepiece, be focused in the viewfinder, nd cuse fire. 26 Attching Optionl Devices

27 s Attch/remove the viewfinder while the cmcorder is turned off. When using the cmcorder with the DVF-L700 ttched, turn the cmcorder on while the POWER switch of the DVF-L700 is set to ON. Setting the Bsic Action Before recording, mke the bsic settings, s required. For detils bout ttching the viewfinder, refer to the operting instructions of the viewfinder. 1 Loosen the fixing ring of the viewfinder shoe, lign the slot of the viewfinder, then ttch the viewfinder by sliding it horizontlly. Viewfinder shoe System Frequency Switch by setting Frequency in System Setting (pge 104) of the System menu. After switching this setting, the cmcorder will utomticlly restrt, depending on the setting vlue. The system frequency setting cnnot be chnged during recording or plybck. Preprtions 2 Tighten the fixing ring fter determining the left nd right position of the viewfinder, then connect the viewfinder cble to the VF connector of the cmcorder. To remove the viewfinder Loosen the fixing ring for the viewfinder, rise the stopper, then remove the viewfinder by sliding it in the reverse direction for when ttching. Shooting Mode You cn switch between the Cine EI mode (llows you to use the cmcorder s film cmer, where the movie is edited postproduction, rther thn t the time of shooting), nd the Custom mode (llows you to edit pictures s you mke the movie, by ccessing ll the setting items). Switch the mode by using Shooting Mode in Bse Setting (pge 104) of the System menu. Min Recorded Signl Set the predominnt signl formt to be used. Set the formt by using Min Opertion in Bse Setting (pge 104) of the System menu. The video signl is recorded on the AXS-R5/R7 ttched to the cmcorder when AXS(R5/R7) hs been selected. YPbPr nd RGB signls re recorded on the SxS memory crd within the cmcorder. Since the RGB signl is output from the SDI 1/2 connector of the cmcorder, record it on n externl device such s SR-R1. Select the formt from YPbPr/RGB/AXS(R7/R5) when Shooting Mode is set to Cine EI, nd from YPbPr/RGB when Shooting Mode is set to Custom. The AXS(R7/R5) signl cn be selected only when ttching the AXS-R5/R7. If the AXS-R5/R7 is not ttched, Min Opertion is locked to YPbPr or RGB. Setting the Bsic Action 27

28 Color Spce Recording Formt Preprtions Select the color gmut tht is to be the bsis of the recorded signl nd the output signl. When Shooting Mode is set to Cine EI, select the color gmut for video output of which MLUT is set to off. When Shooting Mode is set to Custom, Color Spce is locked to Mtrix. Select it by using Color Spce in Bse Setting (pge 104) of the System menu. S-Gmut/SLog2: Wider gmut tht is comprble with film cmer. S-Gmut3.Cine/SLog3: Color gmut tht is esy to djust for digitl cinem (DCIP3). S-Gmut3/Slog3: Wide color gmut optimized by Sony s originl imge distortion correction technology, nd dptble to the color gmut tht will be stndrdized in the future. Mtrix: Selects the color gmut by Mtrix setting s done with trditionl cmers (when Shooting Mode is set to Custom ). Gmm curve is locked to S-Log2 when S-Gmut/ SLog2 is selected, gmm curve is locked to S-Log3 when S-Gmut3.Cine/SLog3 or S-Gmut3/SLog3 is selected. Imger Scn Mode You cn set the shooting method for the imge sensor. Select the mode by using Imger Scn Mode in Bse Setting (pge 104) of the System menu. Norml: Uses the full ngle of Super 35 mm size s it is, except t the high frme rte mode of the Slow & Quick Motion function. When High Frme Rte Mode in S&Q Motion (pge 76) of the Cmer menu is set to 2K Full Scn, the full ngle picture of Super 35 mm size tht is converted to 2K dt is used. When High Frme Rte Mode in S&Q Motion (pge 76) of the Cmer menu is set to 2K Center Scn, the 2K ngle picture tht is hlf of the Super 35 mm size (center re of the picture) is used. 2K Full: Uses the full ngle picture of Super 35 mm size tht is converted to 2K dt. 2K Center: Uses the 2K ngle picture tht is hlf of the Super 35 mm size (center re of the picture). Selectble formts vry, depending on the system frequency nd min recorded signl settings. System frequency Min recorded signl Formt 59.94/50 YPbPr XAVC 4K Clss300* XAVC QFHD Clss300* XAVC P XAVC P MPEG i MPEG P SStP SR-SQ 422 (59.94 only) DNxHD 220x HD i** DNxHD 145 HD i** ProRes 422 HQ HD i** ProRes 422 HD i** RGB XAVC P*** XAVC P*** MPEG i*** 29.97/25/ AXS(R7/ R5) YPbPr RGB AXS(R7/ R5) XAVC P*** XAVC P*** MPEG i*** XAVC 4K Clss480* XAVC 4K Clss300* XAVC QFHD Clss480* XAVC QFHD Clss300* XAVC P XAVC P MPEG i SStP SR-SQ 422 SStP SR-Lite 422 DNxHD 220x HD P** DNxHD 145 HD P** ProRes 422 HQ HD P** ProRes 422 HD P** XAVC P*** XAVC P*** MPEG i*** SStP SR-SQ 444 ProRes 4444 HD P** XAVC P*** XAVC P*** MPEG i*** 28 Setting the Bsic Action

29 System frequency Min recorded Formt signl 24 YPbPr XAVC 4K Clss480* XAVC 4K Clss300* XAVC P SStP SR-SQ 422 SStP SR-Lite 422 ProRes 422 HQ HD P** ProRes 422 HD P** RGB XAVC P*** SStP SR-SQ 444 ProRes 4444 HD P** AXS(R7/ R5) XAVC P*** * PMW-F5 with the CBKZ-55FX pplied or PMW- F55 only. ** When the CBK-55PD is instlled. *** The recorded signl is YPbPr. To chnge the formt, use SxS Formt in Rec Formt (pge 105) of the System menu. Signls from the SDI OUT nd HDMI OUT connectors re lso output ccording to the formt selected with this menu. Using SxS Memory Crds This cmcorder records udio nd video on SxS memory crds (optionl) inserted in the crd slots. About SxS Memory Crds Use the following Sony SxS memory crds or XQD memory crds*. * When using n XQD memory crd, the XQD ExpressCrd dpter (QDA-EX1) is required. Avilble memory crds differ depending on the recording formt nd On / Off setting of High Frme Rte Mode. SxS PRO+ SBP-256D, SBP-128B/C/D, SBP-64B/C/D: Avilble for ll recording formts, nd when High Frme Rte Mode is set to On or Off. SxS PRO SBP-64A, SBP-32: SStP SR-Lite 422, XAVC P/ P (only when High Frme Rte Mode is set to Off ), MPEG P/i, P, DNxHD 220x HD P/i, DNxHD 145 HD P/i, ProRes 422 HD P/i, ProRes 422 HQ HD P/i SxS-1 SBS-64G1A/B, SBS-32G1A/B: MPEG P/i, P XQD memory crd S series, G series QD-S64E, QD-S32E, QD-G128A/E, QD-G64A/E, QD-G32A/E: Avilble for ll recording formts, nd when High Frme Rte Mode is set to On or Off. XQD memory crd N series, M series QD-N64, QD-M128A, QD-M64A, QD-M32A: MPEG P/i, P Preprtions Opertions re not gurnteed with other memory crds. These memory crds comply with the ExpressCrd stndrd. For detils on using SxS memory crds nd usgerelted precutions, refer to the instruction mnul for the SxS memory crd. Using SxS Memory Crds 29

30 Preprtions SxS, SxS PRO, nd SxS-1 re trdemrks of Sony Corportion. XQD is trdemrk of Sony Corportion. The ExpressCrd word mrk nd logo re owned by Personl Computer Memory Crd Interntionl Assocition (PCMCIA) nd re licensed to Sony Corportion. All other trdemrks re the property of their respective owners. Inserting n SxS Memory Crd 1 Open the cover of the crd slot block (pge 14). Switching Between SxS Memory Crds When SxS memory crds re loded in both crd slots A nd B, press the SLOT SELECT button (pge 14) to select the crd you wish to use. If crd becomes full, recording continues fter utomticlly switching to the second crd. The SLOT SELECT button is disbled while recording/ plybck is in progress. Switching is not executed even if you press the button. The button is enbled while the thumbnil screen is displyed (pge 49). 2 Insert the SxS memory crd into the slot with the SxS lbel fcing to the right. The ACCESS lmp (pge 14) lights in red then chnges to green once the memory crd is redy for use. 3 Close the cover. Sttus indictions by the ACCESS lmps Crd slots A nd B re ccompnied by the respective ACCESS lmps to indicte their sttus. Lmp Lights in red Lights in green Off Slot sttuses Accessing the SxS memory crd (writing/reding dt) Stndby (redy for recording or plybck using the SxS memory crd) No SxS memory crd is loded. The loded crd is invlid. An SxS memory crd is loded, but nother slot is ctive. Removing n SxS memory crd 1 Open the cover of the crd slot block, press the EJECT button (pge 14), then pull the button out. 2 Press the EJECT button gin to remove the crd. Dt integrity is not gurnteed if the power is turned off or memory crd is removed while it is being ccessed. Dt on the crd my be destroyed. Be sure tht its ACCESS lmp is lit in green or off when you turn off the power or remove memory crd. Formtting n SxS Memory Crd If n SxS memory crd is not formtted, or ws formtted with nother system, the messge Medi Needs to be Formtted is displyed on the viewfinder screen. Formt the crd s instructed follows. Using Formt Medi (pge 99) in the Medi menu, specify Medi(A) (slot A) or Medi(B) (slot B) then select Execute. On confirmtion messge, select Execute gin. The in-progress messge nd sttus br re displyed, nd the ACCESS lmp lights in red. When formtting is complete, completion messge is displyed. Press the MENU dil to hide the messge. Recording/plybck during formtting You cn perform recording or plybck using the SxS memory crd in the other crd slot while formtting is in progress. (except during High Frme Rte mode recording nd simultneous recording.) If formtting fils A write-protected SxS memory crd or memory crd tht cnnot be used with this cmcorder will not be formtted. As wrning messge is displyed, replce the crd with n pproprite SxS memory crd, ccording to the instructions in the messge. All the dt, including recorded pictures nd setup files, re ersed when memory crd is formtted. 30 Using SxS Memory Crds

31 Checking the Remining Time Avilble for Recording While recording (or stnding by to record), you cn check the remining spce for the SxS memory crds loded in the crd slots on the A/B slot medi sttus/remining spce indiction of the sub disply (pge 17) or viewfinder screen (pge 20). The vilble time for recording with the current video formt (recording bit rte) is clculted ccording to the remining spce of ech crd nd displyed in time units of minutes. A icon ppers if the memory crd is writeprotected. Replcing n SxS memory crd If the vilble time on two crds in totl becomes less thn 5 minutes, the messge Medi Ner Full, flshing the REC lmp, nd beep sound, will wrn you. Replce the crds with those tht hve sufficient spce. If you continue recording until the totl remining time reches zero, the messge chnges to Medi Full, nd recording stops. Up to pproximtely 600 clips cn be recorded on one SxS memory crd. If the number of recorded clips reches the limit, the remining time indiction becomes 0, nd the messge Medi Full is displyed. Restoring n SxS Memory Crd If dt error occurs in memory crd for some reson, the crd must be restored. If n SxS memory crd tht needs to be restored is loded, messge prompting you to execute the restore opertion is displyed on the viewfinder screen. Restore the crd s instructed follows. Select Execute by turning the MENU dil, then press the MENU dil. During restortion, the in-progress messge nd sttus br re displyed, nd the ACCESS lmp lights in red. When restortion is completed, the completion messge is displyed, then press the MENU dil to dispper the messge. If restortion fils A write-protected SxS memory crd, or one on which n error occurred, cnnot be restored. For such crd, wrning messge is displyed. Relese the write protection or replce the crd, ccording to the instructions in the messge. An SxS memory crd on which n error occurred my become usble gin through repeted formtting. In some cses, only prts of clips cnnot be restored. Plybck of the restored clips becomes possible gin. The following opertion my restore n SxS memory crd for which the messge Could not Restore Some Clips is repetedly displyed ech time you try the restortion process: 1 Copy necessry clips to nother SxS memory crd, using the dedicted ppliction softwre (pge 112). 2 Formt the problem SxS memory crd, using the formt function of this cmcorder. 3 Copy the clips bck to the SxS memory crd. Recording/plybck during restortion You cn perform recording or plybck using the SxS memory crd in the other crd slot while restortion is in progress. (except during High Frme Rte mode recording nd simultneous recording.) For restortion of medi recorded with this unit, be sure to use this unit. Medi recorded with device other thn this unit or with nother unit of different version (even of the sme model) my not be restored using this unit. To updte the mngeril file If clips cnnot be plyed bck, updting the mngeril file on the crd my improve the sitution. For this opertion, use Updte Medi (pge 98) of the Medi menu. If you write n XAVC file tht is imported by RAW Viewer V2.2 or lter to the XDROOT\Clip directory of n SxS memory crd directly, tht file cn be plyed by performing Updte Medi. Preprtions Using SxS Memory Crds 31

32 Preprtions Using n SD Crd You cn store the setting vlue file of the cmer on n SD crd (optionl). The stored file cn be loded from the SD crd. Usble SD Crds SDHC memory crd* (Speed Clss: 4 to 10, UHS is not comptible, Cpcity: 2 GB to 32 GB) SD memory crd* (File system: FAT 16, Cpcity: up to 2 GB) * Indicted s SD crd in these Operting Instructions. Inserting n SD Crd 1 Open the cover of the crd slot block (pge 14). 2 Insert the SD memory crd into the slot with the SD lbel fcing up. The ACCESS lmp (pge 14) lights in red then chnges to green once the memory crd is redy for use. Formtting n SD Memory Crd When you use n SD memory crd with this cmcorder, it must be formtted using the formt function of this cmcorder. It is lso necessry to formt n SD memory crd if cution messge is displyed when you mount it. For n SD memory crd tht ws formtted with nother system unsupported by this cmcorder, the messge File System Mismtch is displyed on the viewfinder screen. Formt the crd s instructed follows. Using Formt Medi (pge 99) in the Medi menu, specify SD crd then select Execute. On confirmtion messge, select Execute gin. The in-progress messge nd sttus br re displyed, nd the ACCESS lmp lights in red. When formtting is complete, completion messge is displyed. Press the MENU dil to hide the messge. All the dt re ersed when memory crd is formtted, nd the dt cnnot be restored. 3 Close the cover. Sttus indictions by the ACCESS lmp Lmp Slot sttuses Lights in red Off Accessing the SD crd (writing/reding dt) No SD crd is loded. The loded crd is invlid. Removing n SD memory crd Open the cover of the crd slot block, remove the SD crd by pressing the SD crd once lightly. s Dt integrity is not gurnteed if the power is turned off or memory crd is removed while it is being ccessed. Dt on the crd my be destroyed. Be sure tht its ACCESS lmp is lit in green or off when you turn off the power or remove memory crd. Mke sure tht the crd does not pop out when inserting or removing it. Checking the Remining Time The remining time cn be checked on the Medi sttus screen (pge 13). A icon ppers if the memory crd is writeprotected. To use medi formtted with this cmcorder in the slots of other devices Mke bckup of the medi, then formt it using the other device. 32 Using n SD Crd

33 Using n AXS-R5/R7 You cn record imge/udio (AXS formt) dt to the AXS (Access Memory Crd System) recorder AXS-R5/R7 (optionl) by connecting the AXS recorder to the cmcorder. Attching the AXS-R5/R7 Attch/remove the AXS-R5/R7 while the cmcorder is turned off. 1 Press the relese button of the AXS-R5/ R7 (1) to pop up the ejection lever, then rise the ejection lever (2). s Before ttching the AXS-R5/R7, mke sure tht the ejection lever is rised. Before lowering the ejection lever, mke sure tht the four hooks re ttched securely. If the four hooks re not ttched securely, it my cuse the connection to be poor or dmge the cmcorder nd AXS-R5/R7. 3 Attch the supplied top plte (AXS-R7 only). For detils bout ttching the top plte, refer to the operting instructions of the AXS-R7. Removing the AXS-R5/R7 Press the relese button nd rise the ejection lever, then remove the AXS-R5/R7 by pulling it out while sliding upwrd. Preprtions 2 Insert the projection of the AXS-R5/R7 into the slot on the rer of the cmcorder (1), then lower the ejection lever (2). Remove the AXS-R5/R7 while supporting the cmcorder by hnd. Inserting n AXS Memory Crd The following is the procedure for inserting into the AXS-R5. For inserting into the AXS-R7, refer to the operting instructions of the AXS-R7. 1 Open the cover by sliding the memory slot cover open/close button on the top of the AXS-R5. Using n AXS-R5/R7 33

34 2 Insert the AXS memory crd into the crd slot with the lbel fcing s indicted below. Recording 4K 120FPS with the AXS-R7 Preprtions 3 Close the cover. Lbel Removing n AXS Memory Crd You cn record 4K 120FPS in RAW or X-OCN formt with the AXS-R7. Set the quick menu or setup menu s follows to record 4K 120FPS. For the quick menu setting Set Over 60FPS Resolution to Off nd 1-60FPS Resolution to 4K in the Project ctegory, nd set FPS to 120FPS in the CAMERA-1 screen of the sub disply. For the setup menu setting Set Setting to On, High Frme Rte Mode to Off, nd Frme Rte to 120 in S&Q Motion on the Cmer menu. The following is the removl procedure for the AXS-R5. For the AXS-R7, refer to the operting instructions of the AXS-R7. Open the cover of the AXS-R5, press the EJECT button nd remove the AXS memory crd. Dt integrity is not gurnteed if the power is turned off or memory crd is removed while it is being ccessed. Dt on the crd my be destroyed. Be sure tht its ACCESS lmp is lit in green or off when you turn off the power or remove memory crd. Recording to n AXS Memory Crd Set Shooting Mode in Bse Setting (pge 104) to Cine EI, nd Min Opertion in Bse Setting (pge 104) to AXS(R7/R5) of the System menu. For settings of the AXS-R5/R7, see AXS Recorder (pge 109) of the System menu. The AXS-R7 cn be used to select the recording formt on the AXS memory crd. Select the recording formt from AXS Formt in Rec Formt (pge 105) from the System menu. The AXS memory crd in the AXS-R7 does not switch to the second crd utomticlly, even if the crd becomes full while recording. Use the SLOT SELECT button on the AXS-R7 to switch the crd. Formtting n AXS Memory Crd When you use n AXS memory crd with the AXS-R5/R7 tht is ttched to the cmcorder, it must be formtted using the formt function of this cmcorder. It is lso necessry to formt n AXS memory crd if cution messge is displyed when the cmcorder is turned on with the AXS recorder ttched. For n AXS memory crd tht ws formtted with nother system unsupported by the AXS-R5/R7, the messge Medi Needs to be Formtted is displyed on the viewfinder screen. Formt the AXS memory crd s follows. Using Formt Medi (pge 99) in the Medi menu, specify AXS Memory (when the AXS-R5 is ttched) or AXS(A) / AXS(B) (when the AXS-R7 is ttched), then select Execute. An in-progress messge nd sttus br re displyed, nd the ACCESS lmp lights in red. When formtting is complete, completion messge is displyed. Press the MENU dil to hide the messge. When formtting, ll dt in n AXS memory crd re ersed nd cnnot be restored. 34 Using n AXS-R5/R7

35 Checking the Remining Time Avilble for Recording While recording (or stnding by to record), you cn check the time remining for the AXS memory crds on the AXS memory sttus/ remining spce indiction of the sub disply (pge 17) or viewfinder screen (pge 20). The vilble time for recording with the current video formt (recording bit rte) is clculted ccording to the remining spce of ech crd nd displyed in time units of minutes. s A icon ppers if the memory crd is writeprotected. When the AXS-R7 is ttched to the cmcorder, the time remining on the ctive AXS memory crd is displyed. To switch ctive medi, use the SLOT SELECT button on the AXS-R7. For restortion of medi recorded with this unit, be sure to use this unit. Medi recorded with device other thn this unit or with nother unit of different version (even of the sme model) my not be restored using this unit. To updte the mngeril file If clips cnnot be plyed bck, updting the mngeril file on the crd my improve the sitution. For this opertion, use Updte Medi (pge 98) of the Medi menu. Preprtions Restoring the AXS Memory Crd If dt error occurs on the AXS memory crd for some reson, the crd must be restored. If n AXS memory crd tht needs to be restored is connected, messge prompting you to execute restortion is displyed on the viewfinder screen. Restore the crd s instructed follows. Select Execute by turning the MENU dil, then press the MENU dil. During restortion, the in-progress messge nd sttus br re displyed, nd the ACCESS lmp lights in red. When restortion is completed, the completion messge is displyed, then press the MENU dil to dispper the messge. If restortion fils A write-protected AXS memory crd or one on which n error occurred cnnot be restored. For such crd, wrning messge is displyed. Relese the write protection or replce the crd, ccording to the instructions in the messge. An AXS memory crd on which n error occurred my become usble gin through repeted formtting. In some cses, only prts of clips cnnot be restored. Plybck of the restored clips becomes possible gin. Using n AXS-R5/R7 35

36 Using USB Wireless LAN Module Mking Wi-Fi Connection Only one Wi-Fi device cn be connected t time. Preprtions You cn mke the Wi-Fi connection between the cmcorder nd device such s smrtphone, tblet, etc., by ttching the supplied IFU-WLM3 USB wireless LAN module. s The IFU-WLM3 USB Wireless LAN Module (supplied) my not be vilble in some countries/ regions. Attch/remove the IFU-WLM3 fter the cmcorder is turned off. If you use wireless device ner the cmcorder, the cmcorder my not work correctly. Turn the wireless device off ner the cmcorder. You cnnot use USB wireless LAN module other thn the IFU-WLM3. Depending on the Wi-Fi signl condition in the use environment or the position of the Wi-Fi device nd cmcorder, the Wi-Fi connection my not be estblished. In this cse, fix the IFU-WLM3 to the screw hole (1/4 inch) on the hndle of the cmcorder by using the supplied USB extension cble. To mke network setting Chnge the Bsic Authentiction settings (pge 109) of the System menu s required. Item User Nme Pssword For detils bout the menu settings nd entering chrcter string, see Setup Menu Opertions (pge 67). To mke connection Setting User nme for log-in (fctory defult setting: dmin ) Pssword for log-in (fctory defult setting: model nme pmw-f5 or pmw-f55 ) 1 Set Wi-Fi in Wi-Fi (pge 110) of the System menu to Enble. Mking Wi-Fi connection between device nd the cmcorder enbles you to do the following. Operte the setup menu Record nd plybck the cmcorder Disply the current sttus of the cmcorder Switch between the recording settings nd system settings Operte the ssignble buttons of the cmcorder Attching the IFU-WLM3 1 Open the cover of the USB wireless LAN module retrcting prt (pge 13). 2 Insert the IFU-WLM3 to the USB connector. 3 Close the cover. 2 Mke Wi-Fi connection by inputting the SSID nd Pssword onto the device, or by using the Wi-Fi direct connection function. You cn check the SSID nd pssword of the cmcorder on SSID & Pssword in Wi- Fi (pge 110) of the System menu. When using the Wi-Fi direct connection function, proceed to the following step. 3 Select Execute for Wi-Fi Direct Connection in Wi-Fi of the System menu. The setup menu disppers, nd the connection wit messge for the Wi-Fi direct connection function ppers. Using the Push-Button method When you perform the Push-Button method on the device, the messge for connection permission ppers on the connection wit screen. Select Execute. Using the PIN code method When you perform the PIN code method on the device, the device nme nd PIN code ppers on the connection wit screen. 36 Using USB Wireless LAN Module

37 Complete the connecting process by inputting the PIN code to the device. Using the Wi-Fi Remote Commnder When Wi-Fi connection is estblished between device such s smrtphone, tblet, etc., nd the cmcorder, the Wi-Fi remote commnder ppers on the device screen nd the device cn be used s remote commnder. You cn strt/stop recording nd djust the recording settings with Wi-Fi connected device. This function is useful for setting the cmcorder in remote plce, such s the top of crne, etc. The Wi-Fi remote commnder is not cpble of the following functions. Zoom, Focus, nd Iris control. Displying the thumbnil screen. Wi-Fi remote commnder displys Smrtphone Min screen Plybck screen Cursor screen Wi-Fi connecting sttus (Connected/ Disconnected) Sttus indiction Plybck opertion button: F Rev, Ply/Puse, F Fwd, Prev, Stop, Next Wi-Fi connecting sttus (Connected/ Disconnected) Sttus indiction Cursor opertion button, menu/sttus indiction: Up, Left, Set, Right, Down, Cncel/Bck, Menu, Sttus Preprtions Wi-Fi connecting sttus (Connected/ Disconnected) Sttus indiction: operting sttus, time dt, udio level meter, clip nme, recording formt, medi sttus/ remining spce, bttery remining chrge/dc IN voltge Recording settings indiction: S&Q FPS, Shutter, Color Temp., Sensitivity/Gin/ Exposure Index, Gmm, MLUT, Color Brs, Auto Blck, Auto White Assign screen Wi-Fi connecting sttus (Connected/ Disconnected) Sttus indiction Assignble button indiction: Assignble buttons 1 to 4 Using USB Wireless LAN Module 37

38 Tblet Min screen Wi-Fi connecting sttus (Connected/Disconnected) Sttus indiction Assignble button indiction Cursor opertion button, menu/sttus indiction: Up, Left, Set, Right, Down, Cncel/Bck, Menu, Sttus Preprtions To disply the Wi-Fi remote commnder The disply size of the Wi-Fi remote commnder chnges ccording to the device screen size utomticlly. 1 Mke Wi-Fi connection between the device nd cmcorder (pge 36). Wi-Fi connecting sttus (Connected/Disconnected) Sttus indiction: operting sttus, time dt, udio level meter, clip nme, recording formt, medi sttus/remining spce, bttery remining chrge/dc IN voltge Assignble button indiction: Assignble buttons 1 to 4 Recording settings indiction: S&Q FPS, Shutter, Color Temp., Sensitivity/Gin/ Exposure Index, Gmm, MLUT, Color Brs, Auto Blck, Auto White Plybck screen Wi-Fi connecting sttus (Connected/Disconnected) Sttus indiction Assignble button indiction Plybck opertion button: F Rev, Ply/Puse, F Fwd, Prev, Stop, Next Cursor screen 2 Lunch the browser nd input <cmcorder s IP ddress> ( System menu > Wi-Fi > IP Address )/ rm.html in the ddress br. Exmple: When the IP ddress is , input in the ddress br. 3 Input the user nme nd pssword ( System menu > Bsic Authentiction > User Nme or Pssword ) on the browser. When completing the connection, the disply of the Wi-Fi remote commnder ppers on the device. Operte the Wi-Fi remote commnder by following the disply. The REC button becomes unvilble when the Lock switch is drgged to the right. s Depending on the device, the Wi-Fi remote commnder my not pper properly on the device s screen even though you input s IP ddress>/rm.html in the ddress br. In this cse, input rms.html for smrtphone or rmt.html for tblet insted of rm.html t the end of the ddress to disply the Wi-Fi remote commnder properly. The Wi-Fi remote commnder on the device s screen my no longer mtch the ctul sttus of the cmcorder in the following cses. When this hppens, refresh the browser on the device. when the cmcorder is restrted while the Wi-Fi connection is estblished when the cmcorder is controlled directly while the Wi-Fi connection is estblished when the device is reconnected when you operte forwrd/bckwrd on the device s browser. If the Wi-Fi signl is poor, the Wi-Fi remote commnder my not work properly. 38 Using USB Wireless LAN Module

39 Comptible devices The following devices, using the specified versions or higher, cn be used s Wi-Fi remote commnders. Device OS Browser Smrtphone Android 6.0 Chrome V51 ios 9 Sfri 9 Tblet Android 6.0 Chrome V51 ios 9 Sfri 9 Operte the setup menu from the Wi-Fi remote commnder (Tblet only) To disply the setup menu on the tblet, select Setup Menu on the globl menu tht is displyed by touching the Menu icon ( ) on the upper left of the Wi-Fi remote disply of the tblet. To return to the cmer control screen, select Cmer Control on the globl menu. Menu icon You cn set/disply the following items of the setup menu on the Wi-Fi remote disply (tblet) (: comptible, : not comptible). Cmer menu White Offset White Blck Flre Gin Shutter Slow Shutter Auto Exposure S&Q Motion Color Brs Noise Suppression Flicker Reduce Imge Inversion Lens Interfce Pint menu Gmm Blck Gmm Knee White Clip Detil Aperture Skin Detil Mtrix Multi Mtrix Audio menu Audio Input Audio Level Audio Output Video menu Output On/Off Output Formt Output Setting Monitor LUT Output Disply VF menu VF Setting Peking Mrker Zebr Disply On/Off TC menu Timecode TC Disply Preprtions Using USB Wireless LAN Module 39

40 Preprtions Recording menu Intervl Rec Picture Cche Rec MPEG2 Proxy Rec Control SDI Rec Control Medi menu Updte Medi Formt Medi Clip Nming File menu All File Scene File User Menu Item User Gmm Monitor LUT Monitor 3D LUT Lens File Mintennce menu APR Test Sw Cmer Config System menu System Setting Bse Setting Rec Formt Genlock Assignble Button Switch / Lmp Fn Control Bttery Alrm DC Voltge Alrm Lnguge Clock Set Hours Meter AXS Recorder Bsic Authentiction Wi-Fi All Reset Version s When the setup menu is displyed on the Wi-Fi remote commnder, you cnnot set the setup menu items other thn Bsic Authentiction nd Wi-Fi of the System menu on the cmcorder. When the setup menu is displyed on the Wi-Fi remote commnder, you cnnot chnge the settings on the sub disply. 40 Using USB Wireless LAN Module

41 Recording Bsic Opertion Procedure Bsic recording cn be performed with the following procedures. 1 Mke sure tht the necessry devices re ttched to the cmcorder nd power is supplied to them. 2 Lod the memory crd(s). If you lod two crds, recording is continued by utomticlly switching to the second crd when the first crd becomes full. 3 Set the power switch (pge 12) to the ON position. The recording screen is displyed on the viewfinder screen. 4 Press the REC button (pge 11). The REC lmp lights nd recording begins. If the cmcorder cnnot strt recording immeditely fter the pressing the REC button, the REC lmp flshes. The REC lmp lights when recording strts. 5 To stop recording, press the REC button gin. Recording stops nd the cmcorder enters STBY (recording stndby) mode. Plying recorded clip You cn ply the recorded clip while the cmcorder is in stndby mode. 1 Insert the SxS memory crd. 2 Press the VIEW button in the function button (pge 14) once to disply the VIEW-1 screen. 3 Serch the desired clip by pressing Prev or F Rev button on the sub disply. 4 Press the Ply/Puse button on the sub disply. The plybck imge ppers on the viewfinder. Plybck opertion is performed by the buttons on the sub disply. Ply/Puse button: Puses plybck. To resume plybck, press this button gin. F Fwd button/f Rev button: Plys fst. To return to norml plybck, press the Ply/Puse button. Stop button: Stops plybck or recording. Monitoring udio In norml plybck mode, you cn monitor the recorded udio signls through the built-in speker (pge 12) or connected hedphones. When connecting the hedphones to the hedphones connector (pge 14), the built-in speker is turned off. You cn select udio chnnel to be monitored nd djust the sound volume with Audio Output (pge 86) in the Audio menu. Cueing Up To strt plybck from the top of the clip Press the Prev button or Next button on the sub disply (pge 17). You cn cue to the top of the desired clip by pressing the button repetedly. Switching the SxS memory crds When two memory crds re loded, press the SLOT SELECT button (pge 14) to switch memory crds. You cnnot switch SxS memory crds during plybck. Continuous plybck of crds in slots A nd B is not possible. Switching to the AXS memory crd You cn ply the picture tht is recorded on the AXS memory crd in the AXS-R5/R7 by developing simply. To switch to the AXS memory crd, press the SELECT button on the AXS-R5 or the PLAYBACK SELECT button on the AXS-R7. The plybck signl is output from the output connector of the cmcorder. Recording Bsic Opertion Procedure 41

42 Recording When connecting the cmcorder nd AXS-R5, only EE* is output from the AUX OUT connector of the AXS-R5. Plybck picture is not output. Plybck picture is output from the cmcorder. * EE is not output while in the Slow & Quick Motion mode. Clip (recording dt) When you stop recording, video, udio nd subsidiry dt from the strt to end of the recording re recorded s single clip on n SxS memory crd. Clip nme For ech clip recorded with this cmcorder, clip is nmed by the nming mode tht is set in Clip Nming (pge 99) of the Medi menu. The Shot Number nd clip number re utomticlly incremented. When storing the clip nme by the Title nming mode (pge 99), the clip nme is creted from chrcters tht re set in Title Prefix (1 to 46 chrcters) + clip number tht is set in Number Set (0001 to 9999). Mximum durtion of clip The mximum clip length is 6 hours. If you exceed the mximum clip length, new clip will be utomticlly creted. You cn check the new clip on the thumbnil screen. When storing the clip nme by the Cm ID + Reel# nming mode (pge 99), the clip nme is creted s follows: When there is lredy clip nme tht is stored by the Cm ID + Reel# nming mode on the inserted AXS memory crd, the new file inherits its informtion. Exmples: When B002C003_XXXXXXXX is on the AXS memory crd, the next creted clip nme is B002C004_XXXXXXXX. The Cmer ID of AXS Recorder in the System menu is chnged to B, nd Reel Number is chnged to 002. The clip nme on the informtion tht is displyed during shooting flshes until the cmer strts recording. When the inserted AXS memory crd hs no file, 1 is dded to the Reel Number of the clip tht ws recorded lst. Exmples: When you record on empty crd 2 fter recording up to D001CXXX_XXXXXXXX on crd 1, the next creted clip nme is D002C001_XXXXXXXX. The clip nme on the informtion tht is displyed during shooting flshes until the cmer strts recording. When you set the Cmer ID nd Reel Number of Clip Nming in the Medi menu, tht informtion is pplied. Exmples: When you chnge the Cmer ID to F nd Reel Number to 001 of the AXS memory crd tht is recorded up to E003CXXX_XXXXXXXX, the next clip nme is F001CXXX_XXXXXXXX. When you chnge the Cmer ID only, the Reel Number is chnged to Bsic Opertion Procedure

43 Chnging Bsic Settings You cn mke chnges to the settings bsed on the intended usge of the recorded video or recording conditions. Electronic Shutter Set the shutter speed (cche time). When you set Setting in Shutter (pge 75) of the Cmer menu to On, the shutter speed tht you specified with Shutter is turned on. When the viewfinder double speed drive function (pge 47) is ctivted, the electronic shutter function is locked to on, nd the shutter ngle is limited up to 180 degrees. Setting the shutter mode nd speed Select Mode nd Select in Shutter (pge 75) of the Cmer menu, then set the speed in Shutter Vlue. Shooting in slow shutter The shutter speed is specified in the number of ccumulted frmes. This function llows you to obtin low-noise cler pictures in low light levels or surrel pictures with fterimges. Set Setting in Slow Shutter (pge 76) of the Cmer menu to On, nd specify the number of ccumulted frmes with Number of Frmes. Sensitivity/Gin/Color Temperture/White Blnce The setting items differ, depending on the shooting mode setting. These items cn be set on the setup menu nd sub disply. off, is recorded s the min recorded signl. Sensitivity for the min recorded signl is locked to stndrd sensitivity, nd the picture brightness is chnged in ccordnce with the EI vlue only for the output picture, for which MLUT is set to on. You cn check the processing result of sensitizing or desensitizing on post-production while shooting by using the picture, for which MLUT is set on. You cn set the following vlues for the sensitivity (EI vlue) PMW-F5: 500EI, 640EI, 800EI, 1000EI, 1250EI, 1600EI, 2000EI, 2500EI, 3200EI, 4000EI, 5000EI, 6400EI, 8000EI PMW-F55: 320EI, 400EI, 500EI, 640EI, 800EI, 1000EI, 1250EI, 1600EI, 2000EI, 2500EI, 3200EI, 4000EI, 5000EI Select the color temperture from mong Preset 3200K (tungsten), 4300K (tungsten), nd 5500K (dylight), in White (pge 70) of the Cmer menu. While in Custom mode: Selecting the sensitivity or gin, nd color temperture or white blnce Select the sensitivity (ISO) or gin (db) in Gin (pge 72) of the Cmer menu. Select the color temperture or white blnce in White of the Cmer menu. The color temperture cn be selected for Memory A/Memory B from mong Preset 3200K (tungsten), 4300K (tungsten), nd 5500K (dylight), nd you cn select ny color temperture by using Color Temp. in White (pge 70) of the Cmer menu. For white blnce, djust utomticlly by using Auto White Blnce, or djust Memory A/ Memory B by using Color Temp. Blnce, R Gin, or B Gin, in White of the Cmer menu. Recording While in Cine EI mode: Selecting the sensitivity (EI vlue) nd color temperture Set the sensitivity by using Exposure Index in Gin (pge 72) of the Cmer menu. For the Cine EI mode, it is ssumed tht the RAW signl or output picture, for which MLUT is set to Chnging Bsic Settings 43

44 Recording Audio To djust the udio levels When CH-1 Audio Select/CH-2 Audio Select in Audio Level (pge 86) of the Audio menu is set to Auto, the udio recording levels re utomticlly djusted. To djust the udio recording levels mnully, set to Mnul. Adjust the udio recording levels on CH-1 Audio Level/CH-2 Audio Level in Audio Level of the Audio menu. The recording level is locked for chnnels with AES/ EBU signls selected for udio input. Time Dt Setting the Timecode Specify the timecode to be recorded with Timecode in the TC/UB menu (pge 94). Useful Functions Assignble Buttons The cmcorder hs four ssignble buttons (pges 11, 14) to which you cn ssign vrious functions for convenience. You cn lso ssign the function to the RET button on the lens. Chnging functions Use Assignble Button (pge 107) in the System menu. The ssigned functions cn be viewed on the Assignble button sttus screen (pge 12). Assigned functions Function nme Function Mrker Zebr Peking Disply Video Signl Monitor VF Focus Mgnifier VF Mode Rec S&Q Motion Turning on/off the Center Mrker, Sfety Zone, Aspect Mrker. Turning on/off the Zebr function. Turning on/off the Peking function. Turning on/off the monitor disply of sttus/setting vlue. Switching the wveform indiction for the output signl from SDI (Sub). Turning on/off the Focus Mgnifier function of the viewfinder. Switching viewfinder screen between color nd mono. Strting/stopping recording. Turning on/off the Slow & Quick Motion. Picture Cche Rec Turning on/off the Picture Cche Rec function. Rec Review Performing the Rec Review function. High/Low Key Switching between High Key (monitoring disply for high key blown-out highlights), Low Key (monitoring disply for low key clipped blcks), nd Off (norml disply). White Memory Switching White Switch between Memory A nd Memory B. 44 Useful Functions

45 Function nme Function VF High Contrst Enhncing the contrst of the pictures on the viewfinder. Color Brs Turning the color br on/off. Slow & Quick Motion When the min recorded signl is set to AXS(R7/R5) or YPbPr, nd the system frequency nd video formt (pge 104) re set s follows, you cn set the recording frme rte nd plybck frme rte to different vlues. Min recorded signl AXS(R7/ R5) YPbPr Recording formt 4K reding (When recording on n AXS only) 2K reding (When recording on n AXS only) XAVC 4K Clss300 XAVC QFHD Clss300 XAVC P XAVC P System frequency 23.98P/24P/ 25P/29.97P/ 50P/59.94P 23.98P/24P/ 25P/29.97P/ 50P/59.94P 23.98P/24P/ 25P/29.97P/ 50P/59.94P 23.98P/25P/ 29.97P/50P/ 59.94P 23.98P/24P/ 29.97P/ 59.94P Frme rte * 1 to 60P, 120P 1 to 240P** 1 to 60P 1 to 60P 1 to 180P* 25P/50P 1 to 150P* 23.98P/ 1 to 180P* 29.97P/ 59.94P 25P/50P 1 to 150P* * Setting vlue is 1 to 60 when High Frme Rte Mode is set to Off. ** When recording on AXS nd SxS simultneously, the setting vlue is for SxS. s Slow & Quick Motion mode cnnot be used while recording, plying, or displying thumbnil. Slow & Quick Motion mode cnnot be used while the Slow Shutter mode. Audio cnnot be recorded while in the Slow & Quick Motion mode. When High Frme Rte Mode is set to 2K Full Scn nd the frme rte is set to more thn 66P, moiré my occur in high resolution res of the picture. In this cse, you cn reduce moiré by ttching n optionl CBK-55F2K Opticl 2K Filter. When High Frme Rte Mode is set to other thn Off, the cmcorder cnnot switch to the second crd utomticlly even if crd becomes full. Slow & Quick Motion function is not possible in Intervl Rec nd Picture Cche mode. The cmcorder exits Intervl Rec nd Picture Cche mode whenever you select Slow & Quick Motion mode. The cmcorder exits Slow & Quick Motion mode utomticlly whenever you select Intervl Rec or Picture Cche mode. Recording Time-lpse Video (Intervl Rec Function) The cmcorder s Intervl Rec function llows you to cpture time-lpse videos to the cmcorder s internl memory. This function is n effective wy to shoot slow-moving subjects. When Setting in Intervl Rec (pge 95) of the Recording menu is set to On, nd you strt recording, the cmcorder utomticlly records specified number of frmes t specified intervl time. The Intervl Rec function is vilble when the min recorded signl, the Rec Control setting (pge 98) in the Recording menu, nd the recording formt re set to the following settings. Min recorded signl AXS(R7/ R5) Intervl time Number of frmes in one tke Rec Control Recording formt AXS SxS & AXS XAVC P XAVC P RGB XAVC P XAVC P Recording Useful Functions 45

46 Recording Min recorded s Rec Control Recording formt signl YPbPr XAVC 4K Clss480 XAVC 4K Clss300 XAVC QFHD Clss480 XAVC QFHD Clss300 XAVC P XAVC P The Intervl Rec function cnnot be used t the sme time s the Slow & Quick Motion or Picture Cche function. When you select Intervl Rec mode, the Slow & Quick Motion nd Picture Cche functions re disbled. When you select Slow & Quick Motion or Picture Cche mode, the Intervl Rec function is disbled. The simultneously recording function is not vilble in Internl Rec mode. Intervl Rec settings cnnot be chnged during recording. The following re limittions for the Intervl Rec function. Audio signls will not be recorded. You cnnot perform the Rec Review function. The signl will not be genlocked. Strting to Record from Prestored Video (Picture Cche Function) You cn begin recording specified number of seconds in dvnce by storing up to 30 seconds of video nd udio dt in the internl memory of the cmcorder when you strt recording. When you strt recording fter setting Setting in Picture Cche Rec (pge 95) of the Recording menu to On, the cmcorder records in dvnce of the specified time (Cche Rec Time). The Picture Cche function is vilble for either of the following settings. The system frequency is set to 29.97/25/24/ 23.98, nd the recording formt is set to XAVC 4K Clss300/XAVC QFHD Clss300/XAVC P/XAVC P. The recording formt is set to MPEG P/MPEG i/MPEG P. When the AXS-R7 is ttched to the cmcorder, set Min Opertion in Bse Setting (pge 104) to AXS(R7/R5) from the System menu. The selected Picture Cche mode is retined until the setting is chnged. s The Cche Rec Time setting is restricted, depending on the system frequency, recording formt, nd recording medi. For detils, see pge 96. Picture cche recording is not possible in Slow & Quick Motion nd Intervl Rec mode. The cmcorder exits Slow & Quick Motion nd Intervl Rec mode whenever you select Picture Cche mode. The cmcorder exits Picture Cche mode utomticlly whenever you select Slow & Quick Motion or Intervl Rec mode. The dt stored in picture cche memory is clered when you chnge system settings, such s the recording formt. Picture dt from before the chnge is not recorded even if you strt recording immeditely fter the chnge. The cmcorder exits Picture Cche mode utomticlly. The simultneously recording function nd recording simultneously on the AXS nd the SxS re not vilble in Picture Cche mode. It is not possible to chnge the picture cche setting during recording. It is not possible to chnge the setting of the viewfinder double speed drive function during recording. Simultneously Recording You cn record the two sizes of pictures simultneously on n SxS memory crd in one slot. You cn lso record HD signl on the SxS memory crd in the cmcorder while recording picture nd udio of RAW formt on the AXS-R5/R7. While simultneously recording, the cmcorder cnnot switch to the second crd utomticlly even if crd becomes full. Recording simultneously on one memory crd MPEG2 Proxy function For the PMW-F55, set Setting in MPEG2 Proxy (pge 97) of the Recording menu to On while the recording formt is set to XAVC 4K Clss480/XAVC 4K Clss300/XAVC QFHD Clss480/XAVC QFHD Clss P/50P/ 29.97P/25P/23.98P, or SStP SR-SQ 444/SStP SR-SQ i/29.97P. For the PMW-F5, by instlling the optionl CBKZ-55FX, the MPEG2 Proxy function is vilble while the recording formt is set to XAVC 4K Clss480/XAVC 4K Clss300/XAVC QFHD Clss480/XAVC QFHD Clss P/50P/29.97P/25P/23.98P. The picture of XAVC 4K Clss480/XAVC 4K Clss300/XAVC QFHD Clss480/XAVC QFHD 46 Useful Functions

47 Clss300 or SStP SR-SQ 444/SStP SR-SQ 422, nd the picture signl of MPEG re recorded simultneously on one SxS memory crd. The clip of XAVC 4K Clss480/XAVC 4K Clss300/XAVC QFHD Clss480/XAVC QFHD Clss300 or SStP SR-SQ 444/SStP SR-SQ 422 is recorded under the XDROOT/Clip directory on the SxS memory crd, but the clip of MPEG is recorded under the XDROOT/Sub directory on the SxS memory crd, nd the suffix S02 is dded to the end of the clip nme. s This function cnnot be used while in the Slow & Quick Motion, Intervl Rec, or Picture Cche Rec mode. The MLUT setting is locked to MLUT On for the MPEG2 Proxy video tht is recorded simultneously when in the Cine EI mode. Recording on the AXS nd SxS memory simultneously Set Setting in Rec Control (pge 98) of the Recording menu to SxS & AXS, while Min Opertion in Bse Setting (pge 104) of the System menu is set to AXS(R7/R5). You cn simultneously record pictures of RAW formt nd pictures with formts set by Rec Formt. Rec Review You cn review the lst recorded clip on the screen (Rec Review) by ssigning the Rec Review function to n ssignble button (pge 44). When you stop recording nd press the ssigned button, the lst 2 seconds of the clip re plyed. When you press nd hold the button for more thn 1 second, the cmcorder strts to rewind from two seconds before of the lst frme of the clip t 4 speed. When you relese the button, the cmcorder strts plybck t tht point. Rec Review stops t the end of the clip, then resumes STBY (recording stndby) sttus. The Setup menus cnnot be operted during Rec Review. Focus Mgnifier By pressing the FOCUS MAG button of the viewfinder (DVF-L350, DVF-EL100, DVF- L700) tht is ttched to the cmcorder, you cn expnd the center prt of the viewfinder, nd it is esy to djust the focus. After djusting the focus, press the button gin to returns to the norml (recording) screen. It does not ffect the recorded imge or output signl in the focus mgnifier mode. Flse Color Disply You cn perform the flse color disply on the viewfinder by pressing the SPARE button of the viewfinder (DVF-EL100, DVF-L700) tht is ttched to the cmcorder. For detils bout the flse color disply, refer to the operting instructions of the DVF-EL100 or DVF- L700. The flse color disply is vilble only when the Gmm setting for the video signl tht is output to the viewfinder is set to S-Log2. Viewfinder Double Speed Drive Function If the system frequency is 23.98P, 24P, 25P, or 29.97P, the imge my be blurred nd hrd to see becuse of low frme frequency when you shoot while swying the cmcorder to the right nd the left. In this cse, you cn decrese imge blur nd mke it esier to see by ctivting the viewfinder double speed drive function. To ctivte, set Double Speed Drive in VF Setting (pge 91) of the VF menu to On. s This function is not effective on the following settings. System frequency is 59.94/50. Recording formt is SStP SR-SQ 444/SStP SR- Lite 422/SStP SR-SQ 422, ProRes 4444/ProRes 422 HQ/ProRes 422, DNxHD 220x/DNxHD 145. Setting in Slow Shutter of the Cmer menu is set to On. Setting in S&Q Motion of the Cmer menu is set to On, nd the Frme Rte setting is 1 to 60P. Recording Useful Functions 47

48 When the AXS-R7 is ttched, the recording formt nd frme rte re 4K 120P. When this function is effective nd Setting in S&Q Motion of the Cmer menu is set to Off, the electronic shutter function is locked to on, nd the shutter ngle is limited to 180 degrees. Recording 48 Useful Functions

49 Thumbnil Screens Thumbnil Screens When you press the Thumbnil button of the sub disply (pge 17), clips recorded on the SxS memory crd re displyed s thumbnils on the screen. You cn strt plybck from the clip selected on the thumbnil screen. The plybck picture cn be seen on the viewfinder screen nd externl monitors. Press the Thumbnil button of the sub disply to exit the thumbnil screen nd return to the recording screen. Configurtion of the Screen Informtion for the clip selected with the cursor re displyed t the bottom of the screen. The icon of the current SxS memory crd is highlighted, shding the nonselected one. (If the crd is write-protected, lock icon is displyed to the left.) Cursor (yellow) Current clip No./ Totl number of clips Thumbnil Screens 1. Thumbnil The thumbnil imge for ech clip is n index frme from the clip. When recording, the first frme of clip is utomticlly set s the index frme. Below ech thumbnil, the clip/frme informtion is displyed. You cn chnge the displyed item on Thumbnil Cption in Customize View (pge 50) of the thumbnil menu. 2. Clip nme/title The clip nme or title of the selected clip is displyed. 3. File formt The file formt of the selected clip is displyed. 4. Recording video formt 5. Specil recording informtion If the selected clip ws recorded in specil recording mode, the mode is displyed. Clips recorded in Slow & Quick Motion disply the frme rte to the right. 6. Durtion of the clip 7. Cretion dte nd time Thumbnil Screens 49