CONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS...

Transcription

1

2 Thank you for your purchase of this product. Before operating the product, please read this instruction manual carefully to ensure proper use of the product. Please store this instruction manual in a safe place for future reference. CONTENTS PRODUCT FEATURES... EG-2 SAFETY PRECAUTIONS... EG-2 PARTS DESCRIPTION... EG-3 INSTALLATION AND ADJUSTMENT... EG-4 SPECIFICATIONS... EG-7 PRODUCT FEATURES High resolution 540TVL and low light performance surveillance camera with a built-in 1/3 CCD. A stylish all weather outdoor housing ideal for installations requiring a discreet appearance and outdoor performance. Integrated Computar varifocal lens allows for versatile applications and easy installation. Outstanding 0 lux performance with built in IR LEDs. Digital Day/Night feature switches to B/W image at night. Photocell activates IR light at night. Easy cable management with cable feed-through bracket. Built-in 20 LED lights. IP66 rating for all weather conditions. 24V AC / 12V DC Auto Sensing Dual Voltage. SAFETY PRECAUTIONS The installation should be made by a qualified service person and should conform to all local codes. This symbol indicates that there is a possibility of injury or damage to equipment. (1) Use only 24V AC power supply marked class 2 or +12V DC regulated power supply marked class 2. (2) To prevent fire or electrical shock, UL listed class 2 wiring should be used for the 12V DC or 24V AC input terminal. (3) Be sure to connect each lead to the appropriate terminal. Wrong connection may cause malfunction and / or damage to the video camera. (4) Do not attempt to aim the camera at the sun or other extremely bright objects that cause smear to appear irrespective of whether the camera is operating or not. This can damage the CCD (Charge Coupled Device). (5) Do not place the camera in the following locations. 1 Locations subject to extremely high or low temperatures. (Operating temperature range: -10 C to +50 C {14 F to 122 F}) (Storage temperature range: -20 C to +60 C {-4 F to 140 F}) 2 Locations where there are large amounts of water vapor and steam. (6) Ensure the location selected is sufficiently strong enough to support the weight of the camera and is free from vibration. (7) When this camera is installed near equipment that emits a strong electromagnetic field, some irregularity such as noise on the monitor screen may happen. (8) Be sure to use screws suitable for the type of material to which the camera is being mounted. (9) Do not allow the camera to be subjected to strong impacts or shocks. The camera could be damaged by improper handling or storage. (10) Never attempt to disassemble or modify the camera. (11) If an abnormality should occur, immediately turn off the power and consult your dealer. This device complies with Part 15 of the FCC Rules. Operation is subject to following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. This symbol indicates that there is a possibility of death or damage to operator or others. To prevent fire or electric shock, do not expose this product to rain or moisture. EG-2

3 PARTS DESCRIPTION Outside 4 Bracket bn bo * Unscrew the Front Cover counterclockwise to open the unit for adjustments. Once adjusted, screw the Front Cover back and tighten it clockwise, and refrain from opening and closing frequently to ensure the best waterproof and condensation free performance. 1 Inside bk bl bm 1 IR LED 2 Photo sensor 3 Front cover 4 Sunshield 5 Focus adjustment lever (Lock screw) 6 View angle adjustment lever (Lock screw) 7 DIP SW (AGC ON/OFF, FL ON/OFF, BLC ON/OFF, ALC ELC) 8 DC iris level adjustment volume 9 Service jack socket bk Locking ring (Body) bl Locking ring (Bracket) bm Mounting base bn BNC connector for video output bo DC jack for power input (12V DC or 24V AC) Accessories Service connector (*optional) EG-3 Wrench: 1ea Bracket screw: 3ea Template: 1ea Instruction manual: 1ea Additional power connector: 1ea

4 INSTALLATION AND ADJUSTMENT Attaching to the ceiling Attaching to the ceiling or wall This section explains how to install the unit where cables are running through the interior of the ceiling or wall. - Drilling holes in the ceiling or wall: Use the template included to mark out the position on the ceiling or wall where you want to install the unit. When running cables through the interior of the ceiling or wall, use the template, and drill three holes for screws used to attach the camera body and one hole for the cables (Cables). Attaching to the wall Attached screws are not necessarily suitable for all applications. Ensure to check if the screws are suitable for the intended applications. EG-4

5 Adjusting the camera direction This camera can be easily adjusted for viewing in all directions. After attaching the camera on the wall or ceiling, adjust camera for the desired direction. Then tighten each locking ring and lock rings with an allen wrench as shown in the picture below. Connecting the cables Connect the power and video cables. Connect the video cable from the monitor and the coaxial video cable attached to the camera body. For using DC 12V, connect DC jack from camera with power supply (CLASS 2 ONLY). If necessary, after cutting off DC jack from camera connect it with power supply. For using AC 24V, after cutting off DC jack from camera connect it with power supply (CLASS ONLY 2) Specification below is recommended as an Output rated capacity of Power supply that is connected to camera. Input power Voltage current 12V DC 12V DC ± 10% 500mA ± 10% 24V AC 24V AC ± 10% 400mA ± 10% To ensure the best low light performance, this camera has IR LED device to change automatically to night mode when the environment gets dark. If the high light source or some object reflecting very bright light is placed within 1m from the installed camera, it interferes with IR LED performance so that Day & Night function may not perform at the optimum level. Ensure that the field conditions are suitable before installing the camera unit. Be sure to check that the cables are connected correctly before turning on the power. Turning on the power when the cables are connected with incorrect polarity may damage the camera. EG-5

6 Adjusting the DIP Switch Mode Each of the following functions can be adjusted by ON/OFF of the Switch. 1 ELC/ALC ELC Easy back focus adjustment to maximize the best focusing (refer to Attention 1) ALC Factory set position 2 AGC (Auto Gain Control) 3 BLC (Backlight compensation) The setting modes shown at left are (= ) actual factory default settings. ON Depending on Video signal, Gain is controlled automatically. (Factory set position) OFF Apply in the stable light condition ON Select this position when a strong light is in the back ground. OFF Factory set position 4 FL (Flickerless) ON Shutter speed to be fixed at 1/100 (NTSC) 1/120 (PAL) (refer to Attention 2) OFF (Factory set position) * Caution: Never set to ON mode in ordinary locations except for special locations like Tokyo area in Japan, etc. 1 ELC Mode: This special mode is not only to help prevent focus shift but also to make the lens focus adjustment easier in the field of installation. Simply make the adjustment in the following order: - Select ELC mode - Adjust lens focus well - After adjusting, select ALC mode 2 Setting the Flickerless function to ON under low light conditions may reduce the sensitivity. Adjusting the view angle and focus 1 Move the lever to adjust focus and zoom after taking off the Front Cover. 2 Turn focus and zoom levers in clockwise direction to fix the positions. Adjusting the DC iris level Adjust the DC iris level to suit the environment. Service Jack Socket A service jack socket is provided for temporary video connection when focusing the camera. Service jack socket Service connector cable (*optional) EG-6

7 SPECIFICATIONS Model name BCH-IR312NA TV system NTSC Scanning system 2:1 Interlace Image sensor 1/3 -Type Interline transfer CCD Effective elements 768 (H) x 494 (V) Scanning frequency kHz (H) / 59.94Hz (V) Video output 1.0V p-p / 75Ω Horizontal resolution 540 TVL Min. Illuminance 0 lux (B/W Mode - at IR LED ON) Day / Night Digital Day / Night S/N ratio More than 50 db (at minimum AGC gain) Gamma characteristic 0.45 IR Illumination 20 IR LEDs Sync. System Internal only Electronic shutter 1/60 sec. (FL OFF), 1/100sec. (FL ON) White balance ATW Power supply AC 24V ± 10%, 60 ± 1Hz, DC 12V ± 10% Power consumption DC 12V 6W AC 24V 5.5W Ambient temperature Operation: -10 C to +50 C / Storage: -20 C to +60 C Ambient humidity (No condensing) Operation: Max. 85%RH / Storage: Max. 95%RH IP rating IP66 External dimensions 117(L) x 84Ф (Included sunshield) Weight 650g Adjustment volumes DC Iris Adjustment Switches, Bolts Dip Switch Accessories Wrench, Bracket Tapping Screw (M4x20 : 3pcs), Template, Instruction Manual, Additional Power Connector * The specifications and/or appearance of the product may change without a prior notice. EG-7

8 LENS SPECIFICATIONS Max. aperture ratio 1: Focal length 3.3mm - 12mm Iris (DC auto iris) F1.4 - F360C Angle of view (Wide to Tele) D H V * The specifications and/or appearance of the product may change without a prior notice EG-8