Champ VMV LED Series Luminaires Improve safety, reliability and energy efficiency

Size: px

Start display at page:

Download "Champ VMV LED Series Luminaires Improve safety, reliability and energy efficiency"

Marvin Bell
6 years ago
Views:

The Champ VMV LED Family VMV LED Series are designed to provide full-spectrum, crisp, white light with custom IES Type I, III and V distribution.

Applications: Locations requiring continuous and consistent light levels in extreme ambient temperatures Areas requiring frequent on-and-off of lights Where flammable vapors, gases, ignitable dusts,

pharmaceutical facilities; food and beverage facilities; mining; platforms; loading docks; tunnels; indoor/outdoor spot lighting; outdoor wall and stanchion mounted general area lighting Equivalent

Champ VMV LED Benefits: Instant illumination and restrike Better visibility with crisp, white light Cold temperature operation / no warm-up required Redundancy in drivers with multiple series

1 The Champ VMV LED Family VMV LED Series are designed to provide full-spectrum, crisp, white light with custom IES Type I, III and V distribution. Five versions of the Champ VMV LED are available, providing ideal solutions for a wide range of applications. Model Nominal Lumens (Type V) Wattage Tolerance +/- %. Applications: Locations requiring continuous and consistent light levels in extreme ambient temperatures Areas requiring frequent on-and-off of lights Where flammable vapors, gases, ignitable dusts, fibers or flyings are present; indoors or outdoors Where extremely corrosive, wet, dusty, hot and/or cold conditions exist Manufacturing plants; heavy industrial, chemical, petrochemical or pharmaceutical facilities; food and beverage facilities; mining; platforms; loading docks; tunnels; indoor/outdoor spot lighting; outdoor wall and stanchion mounted general area lighting Equivalent HID Luminaire Typical Energy Savings / Lifetime VMV3L 3, WW Up to 77% VMV5L 5, W-1W Up to 67% VMV7L 7,4 94 1W-175W Up to 67% VMV9L 9, WW Up to 74% VMV11L, W Up to 74% Champ VMV LED Benefits: Instant illumination and restrike Better visibility with crisp, white light Cold temperature operation / no warm-up required Redundancy in drivers with multiple series circuits connected to each driver to avoid complete loss of illumination Easy installation compact modular fixture attaches onto existing Champ mounting module Energy-efficient technology up to 77% energy savings over HID fixtures Provides up to 6, hours rated life and up to 17, hours of economic life eliminates need for frequent lamp replacement Contains no mercury or other hazardous substances Shock- and vibration-resistant solid-state luminaires have no filaments or glass components that could break greatly reduces the risk of premature failure Operating ambient C to 55 C Dark sky compliant 5 year fixture warranty Refer to page 2 of the D-914 authorized distributor price book for Eaton's Crouse-Hinds standard Terms and Conditions. *Approved models include: VMV3L/UNV1; VMV5L/UNV1; VMV7L/UNV1; VMV9L/UNV1; VMV11L/UNV1; VMV13L/UNV1; VMV17L/UNV1; VMV21L/UNV1; VMV25L/UNV1; VMV3L/UNV34; VMV5L/UNV34; VMV7L/UNV34; VMV9L/UNV34; VMV11L/UNV34. Refer to Qualified Products List under Family Models for full listing details. Not all models are approved for all application categories. Certifications and Compliances: DesignLights Consortium Qualified (some models are not DLC qualified)* NEC and CEC Class I, Division 2, Groups A, B, C, D Class I, Zone 2, na nr Class II, Groups E, F, G Class III Zone 21 tb UL Standards UL844 UL1598, UL1598A Marine CSA Standard cul Listed to CSA Standard CSA C22.2 No. 137 IECEx/ATEX Standards IEC679-:11/EN679-:12 IEC679-15:/EN679-15: IEC679-31:8/EN679-31:9 IEC6529:1/EN6529:1 IEC6598-1:8/EN6598-1:8 IEC6598-2:8/EN6598-2:8 IECEx UL 13.52X DEMKO 13 ATEX 15741X DEMKO 13 ATEX 14713X CE -277 VAC / 8-2 VDC Ex na nr IIC T6 Gc C to + C Ex na nr IIC T5 Gc C to +55 C Ex tb IIIC T72 C Db IP66 C to + C Ex tb IIIC T87 C Db IP66 C to +55 C II 3 G Ex na nr IIC T6 Gc C to + C II 3 G Ex na nr IIC T5 Gc C to +55 C II 2 D Ex tb IIIC T72 C Db IP66 C to + C II 2 D Ex tb IIIC T87 C Db IP66 C to +55 C VAC Ex na nr IIC T4 Gc C to +55 C Ex tb IIIC T7 C Db IP66 C to + C Ex tb IIIC T85 C Db IP66 C to +55 C II 3 G Ex na nr IIC T4 Gc C to +55 C II 2 D Ex tb IIIC T7 C Db IP66 C to + C II 2 D Ex tb IIIC T85 C Db IP66 C to +55 C US: CAN: Copyright 15 Eaton s Crouse-Hinds Business Standard Materials: Lamp housing and adapter die cast aluminum with Corro-free epoxy powder coat Lens heat- and impact-resistant glass Gaskets silicone External hardware stainless steel Factory-sealed, no external seals required LED System: High intensity discrete power emitters Cool white (K, 7 CRI) and warm white (K, 8 CRI) Custom optics designed to go over each discrete LED Custom Optics: Three optical options to maximize light distribution and intensity: TYPE I Mining conveyor belts Aisleways and hallways Catwalks and walkways Ramps and loading docks Tunnels with overhead mounts TYPE III Narrow crosswalks or passages with wall mounted fixtures Tunnels with wall mount Wall or stanchion mount requiring 18 forward throw beam patterns TYPE V Pendant, ceiling or stanchion mount overhead building mounts Processing mills, industrial plants, large buildings, warehouses, etc.

Wet Locations, Type 4X, IP66 Drivers: Option /UNV1 /UNV34** /VDC **No separate external transformer required to step down voltage. Separate driver for DC applications.

/ 6 Hz Input Power (Watts) 41 67 94 114 118 Input Amps at 1-277 VAC.34-.17.57-.29.8-.42.96-.49.96-.49 Voltage Range, VDC 8-2 8-2 8-2 8-2 8-2 Power Factor >.9 >.

Design Features: A B C D E Installation and replacement made simple - this contractor-friendly, modular design is ideal for both retrofit and new construction applications.

The compact modular design of the VMVL allows for easy component replacement and future upgrade.

Various AC and DC input voltage options are available to suit virtually any drive requirement.

2 Wet Locations, Type 4X, IP66 Drivers: Option /UNV1 /UNV34** /VDC **No separate external transformer required to step down voltage. Separate driver for DC applications. 3L - 11L VAC, / 6 Hz VAC, / 6 Hz 8-2 VDC, / 6 Hz Electrical Ratings: VMV3L VMV5L VMV7L VMV9L VMV11L Voltage Range, VAC Frequency / 6 Hz / 6 Hz / 6 Hz / 6 Hz / 6 Hz Input Power (Watts) Input Amps at VAC Voltage Range, VDC Power Factor >.9 >.9 >.9 >.9 >.9 Nominal Lumens (Type V) 3,515 5,288 7,4 9,515,935 Tolerance +/- %. Design Features: A B C D E Installation and replacement made simple - this contractor-friendly, modular design is ideal for both retrofit and new construction applications. These luminaires are installed in the same manner and use the same mounting modules as existing Champ Series luminaires. The compact modular design of the VMVL allows for easy component replacement and future upgrade. High efficiency and lumen output - custom high efficiency LED drivers are designed to provide reliable operation in even the harshest environments. Various AC and DC input voltage options are available to suit virtually any drive requirement. Safe, reliable heat transfer - die cast aluminum housing provides safe and effective heat transfer from the LED assembly to the outside environment, ensuring low LED junction temperature, reliability, and sustained lumen performance. The vertical fin design facilitates air flow and dust shedding. The impact-resistant lens is sealed from the outside environment and provides ingress protection against water and dust. Custom optics - custom optics designed for discrete LED power emitters. Ease of wiring and installation - available with lever lock connectors and standard three-pole terminal block for ease of wiring and installation. Custom Optics: Custom optics designed for discrete LED power emitters: Type V standard Type I and Type III optional E A B C D Type I Type III Type V Colored LED Options: Available in red, blue, green and amber Reduction in light pollution for night space observation and sky glow due to isolating blue wavelength in red and amber colors Wildlife friendly Improves visibility for telescopes in observatories during night sky space exploration US: CAN: Copyright 13 Eaton s Crouse-Hinds Business 925

3 Improve safety, reliability and Catalog Numbering System: VMV 7L W 2A R1 G /UNV1 S89 Lamp/Function 3L 5L 7L 9L 11L RL GL BL 3,515 Lumen LED 5,288 Lumen LED 7,4 Lumen LED 9,519 Lumen LED,935 Lumen LED Red (3, Lumen) Green (4, Lumen) Blue (2, Lumen) Color Temperature Cool ( ± K) Warm W (K ± K) Guard G Voltage /UNV1 /UNV34 /VDC No Guard P1 Wire Guard VAC, /6 Hz VAC, /6 Hz 8-2 VDC, /6 Hz Suffixes S812 S89 S891 S896 S93 TB6 Trunnion Mount Kit with Pin Quick Clip Diffused Lens Teflon Coated Lens Polycarbonate Lens Six-pole Terminal Block AL Amber (5, Lumen) Mounting Style No Cover J 1-½ Stanchion 25 P 2A 3A 2B 3B 2C 3C 2HA 2TW 1-½ Stanchion Straight ¾ Pendant 1 Pendant ¾ Cone Pendant 1 Cone Pendant ¾ Ceiling 1 Ceiling ¾ Flexible Pendant ¾ Wall 3TW 1 Wall *For new construction, order R1A only. **For new construction, order R3A1 only. Not available for IEC applications. Optics R1 R1A R1B R3 R3A1 R3A2 R3B1 R3B2 Type V Optic Standard (All Mounts) Type I Optic (All Mounts Minus Ceiling) Type I Optic (Ceiling with Conduit 45 Counterclockwise or 135 Clockwise from Hinge)* Type I Optic (Ceiling with Conduit 45 Clockwise or 135 Counterclockwise from Hinge)* Type III Optic (All Mounts Minus Ceiling) Type III Optic (Ceiling with Conduit 45 Counterclockwise from Top Hat Hinge)** Type III Optic (Ceiling with Conduit 135 Clockwise from Top Hat Hinge)** Type III Optic (Ceiling with Conduit 45 Clockwise from Top Hat Hinge)** Type III Optic (Ceiling with Conduit 135 Counterclockwise from Top Hat Hinge)** Options: Description Suffix Wire guard with captive mounting hardware P1 Trunnion mount with redundant pin locking mechanism (ceiling mount required) S812 K1 Quick Clip for quick installation S89 Diffused lens for glare reduction S891 Teflon coating on lens for additional shatter protection S896 Polycarbonate lens available in applications where glass is prohibited S93 Six-pole terminal block TB6 Not available for IEC applications. Accessories (Ordered Separately): Description Cat. # (Ordered Separately) Photocell, 1V, / 6 Hz D2S Photocell, 8-277V D2S8 277 Occupancy sensor, 1 /2" entry, 1 / 277 VAC*** COS1/UNV1 Occupancy sensor, 3 /4" entry, 1 / 277 VAC*** COS2/UNV1 Occupancy sensor, 1" entry, 1 / 277 VAC*** COS3/UNV1 ***For VAC, replace /UNV1 with /UNV US: CAN: Copyright 13 Eaton s Crouse-Hinds Business

4 Improve safety, reliability and Dimensions: Pendant Ceiling Wall Trunnion Cone Pendant BRACKET FOR WALL MOUNT OR SFA6 SLIPFITTER 2X LOCKING PINS 2X TRUNNION ROTATION HARDWARE CM2 OR CM3 TOP HAT X TOP HAT MOUNTING HARDWARE Stanchion Angled Stanchion Straight Weights: Net Luminaire Weight: 21.8 lbs. 8.7 kg. Mounting Module add (lb.) Pendant Cone Pendant Flexible Pendant Ceiling Wall Angle Stanchion Straight Stanchion Temperature Codes: Model Driver Type Ambient 3L, 5L, 7L, 9L, 11L RL, GL, BL, AL Cl. I, Div. 2 / Zone 2, na, nr Cl. II, Div. 1 Sim. Pres. / Cl. I, Div. 2 / Cl. II, Div. 1 Zone 21 /UNV1 (-277 VAC) C T6 T5 T3C T72 /VDC (8-2 VDC) 55 C T5 T4A T3B T87 /UNV34 ( VAC) /UNV1 (-277 VAC) C T4 T5 T3C T7 55 C T4 T4A T3A T85 C T5 T6 T4A T6 55 C T4 T6 T4A T75 Teflon and diffused glass options are only NEC certified for: Class I, Division 2/Sim. Pres. - T3C ( C); T3B (55 C) for /UNV1 and /VDC, and T3C ( C); T3A (55 C) for /UNV34. Class II, Division 1 - T5 ( C); T4A (55 C) for /UNV1, /VDC and /UNV34. Family Tree: MOUNTING MODULE SERIES PENDANT APM2 APM3 HPM2 ANGLED BPM2 BPM3 CEILING CM2 CM3 WALL TWM2 TWM3 STANCHION JM5 PM5 VMV*L PVM*L US: CAN: Copyright 13 Eaton s Crouse-Hinds Business 927

5 VMVM2C175G241-S VMVM2C175G243-S VMVM2C175G245-S L Type I coo L Type V Photometric Data: Photometric Layout Comparison - Champ VMV7L LED Versus 175W Metal Halide: VMV 175W PSMH - Type I VMV7L - Type I TYPE I OPTICAL PATTERN VMV 175W MH Grid Illuminance VMV LED Grid Illuminance VMV 175W PSMH - Type III VMV7L - Type III TYPE III OPTICAL PATTERN VMV 175W MH Grid Illuminance VMV LED Grid Illuminance VMV 175W PSMH - Type V VMV7L - Type V TYPE V OPTICAL PATTERN VMV 175W MH Grid Illuminance VMV LED Grid Illuminance Actual Lumens (Nominal ) 3L 5L 7L 9L 11L Type I 3,115 4,687 6,562 8,437 9,692 Type III 3,271 4,921 6,89 8,859,177 Type V 3,515 5,288 7,4 9,519,935 Tolerance +/- % US: CAN: Copyright 13 Eaton s Crouse-Hinds Business

Champ Pro PVM Series

Pro Series LED Lighting Champ Pro PVM LED Luminaires Champ Pro PVM Series LED luminaires for harsh & heavy industrial areas 3, to 25, lumen LED high bay luminaires Champ Pro PVM Series Safe. Reliable.