SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME

Size: px

Start display at page:

Download "SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME"

Grace Andrews
6 years ago
Views:

Certificate of Compliance according to 2.

1 08 SIEVES 200mm.Ø x 50mm. STAINLESS STEEL FRAME *The test sieve is recommended by: ISO, UNE, DIN, AFNOR, BS *Suitable for wet sieving *Each sieve is marked with a serial number to ensure traceability *Delivered with a Certificate of Compliance according to 2.1 EN 10204, at no extra charge *Certificate of Calibration indicating uncertainty of sieve (on request) *Metallic identification plate (on request) IMPORTANT NOTE: THE SIEVES OF 200mm.Ø DO NOT FIT TOGETHER WITH THE SIEVES OF 203mm.Ø WEIGHT OF SIEVES : From 300g to 500g depending on the mesh. RECOMMENDED VOLUMES OF TEST MATERIAL TO BE SIEVED: OPENING VOLUME OPENING VOLUME OPENING VOLUME 38µ 25 cm³ 125µ 50 cm³ 2.00 mm 200 cm³ 45µ 30 cm³ 250µ 70 cm³ 4.00 mm 350 cm³ 63µ 35 cm³ 500µ 100 cm³ 8.00 mm 500 cm³ 90µ 40 cm³ 1.00 mm 140 cm³ mm 1000 cm³ CONFIGURATIONS AVAILABLE 08.1.SIEVES WITH METALLIC MESH STANDARDS: ISO ASTM E SIEVES WITH PERFORATED PLATES SQUARE HOLES STANDARDS: ISO ASTM E SIEVES WITH PERFORATED PLATES ROUND HOLES STANDARDS: ISO SIEVES WITH PERFORATED PLATES RECTANGULAR HOLES STANDARD: ISO SIEVES WITH ELECTROFORMED PLATES SQUARE HOLES STANDARDS: ISO ASTM E

2 08.1.SIEVES WITH METALLIC MESH ISO ASTM ARTIC.No ISO ASTM ARTIC.No E CISA E CISA 20 µ No mm No µ No mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No µ mm µ No mm No 3 1/ µ mm 1/4 in µ No mm in µ mm µ No mm 5/16 in µ mm µ No mm 3/8 in µ mm µ No mm 7/16 in µ mm 1/2 in µ No mm in µ mm µ No mm 5/8 in µ mm µ No mm 3/4 in µ mm µ No mm 7/8 in µ mm 1.00 in µ No mm 1.06 in µ mm µ No mm 1 1/4 in µ mm mm 1 1/2 in mm MESH MATERIAL: STAINLESS STEEL mm 1 3/4 in mm 2.00 in mm 2.12 in mm mm 2 1/2 in mm mm 3.00 in mm mm 3 1/2 in mm 4.00 in mm 4.24 in mm mm 5.00 in

3 08.2.SIEVES WITH PERFORATED PLATES SQUARE HOLES ISO ASTM ARTIC.No E CISA 4.00 mm 5/32 in mm mm 3/16 in mm mm 7/32 in mm 1/4 in mm 17/64 in mm mm 5/16 in mm mm 3/8 in mm mm 7/16 in mm 1/2 in mm 17/32 in mm mm 5/8 in mm mm 3/4 in mm mm 7/8 in mm 1.00 in mm 1 1/18 in mm mm 1 1/4 in mm mm 1 1/2 in mm mm 1 3/4 in mm 2.00 in mm 2 1/8 in mm mm 2 1/2 in mm mm 3.00 in mm mm 3 1/2 in mm 4.00 in mm 4.24 in mm mm 5.00 in Sieves with perforated plates included in this list are manufactured especially to comply with the new ISO standards. The perforated plates comply with the latest standards concerning the openings, pitches, and thickness. Furthermore, the plates are not perforated in the area in contact with the frame, which prevents partial holes and possible incorrect test results. NOTE: The standard EN 933-2, concerning particle size distribution of aggregates, recommends the use of sieves with perforated plates and square holes (according to ISO ) when the mesh opening is 4.00mm. or above. MATERIAL OF PERFORATED PLATES: STAINLESS STEEL AISI-304

4 08.3.SIEVES WITH PERFORATED PLATES ROUND HOLES ISO ARTIC.No CISA 0.50 mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm The sieves with the following openings: 0.50 mm 1.00 mm 1.80 mm 4.00 mm 4.50 mm are used for the testing of colza, soya bean, sunflower, sorghum, and maize. MATERIAL OF PERFORATED PLATES: FROM 0.50mm.Ø TO 1.80mm.Ø: SOFT STEEL ALL OTHER OPENINGS: STAINLESS STEEL AISI SIEVES WITH PERFORATED PLATES RECTANGULAR HOLES OPENING ARTIC.No CISA 1.00 x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm x mm The sieves mounted with perforated plates and rectangular holes are manufactured entirely by stainless steel AISI-304. The main field of application is the industry of grain and cereal. To obtain a total test precision the plates are not perforated in the area in contact with the frame, which prevents partial holes and possible incorrect test results.

5 08.5.SIEVES / ELECTROFORMED PLATES - SQUARE HOLES The sieves with electroformed plates have much smaller tolerances than the sieves with metallic mesh. The tolerance for this kind of sieve is +/- 2%. According to the ISO Standards the sieves with metallic mesh are allowed tolerances two to ten times superior, depending on the opening size. These sieves with electroformed plates are used both for small sample sizes as well as for special materials, and above all for high precision quality control. Each sieve is delivered with a Certificate of Compliance. Due to the high price, compared to sieves with metallic mesh, their use is limited to the applications where the special qualities of the sieves are required. The sieves with electroformed plates are precision instruments which have to be treated carefully. All the sieves below comply with the standards ISO and ASTM E NOTE: All sieves with electroformed plates are manufactured when ordered, which means that once given the order the sieves cannot be returned. OPENINGS ARTIC.No CISA OPENINGS ARTIC.No CISA 5 µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ µ

6 ACCESSORIES DESCRIPTION ARTIC.No CISA *COVER 200mm.Ø NORMAL *COVER 200mm.Ø FOR WET SIEVING *PAN 200mm.Ø x 50mm.H. NORMAL *PAN 200mm.Ø x 50mm.H. FOR WET SIEVING *SET OF COVER AND PAN 200mm.Øx50mm.H *SET OF COVER AND PAN 200mm.Ø FOR WET SIEVING *O-RING FOR SIEVE 200mm.Ø J200 ON REQUEST CERTIFICATE OF CALIBRATION ACCORDING TO: ISO 3310 ASTM E-11 AFNOR NF X BS 410 METALLIC IDENTIFICATION PLATE SIEVE FRAMES OF STAINLESS STEEL AISI-316, SUITABLE FOR THE PHARMACEUTICAL INDUSTRY MOUNTING OF SUPPORT MESH WHEN OPENINGS ARE BELOW 100µ CE R

SIEVING SOLUTIONS TOGETHER

PARTICLE TEST PTY LTD. PO BOX 3791 TUGGERAH NSW 2259 AUSTRALIA SIEVING SOLUTIONS TOGETHER PH : +61 0(2) 4304 1088 Email : sales@particletest.com.au www.particletest.com.au CISA is a company of more than