KH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
|
|
|
- Bruce Patrick
- 6 years ago
- Views:
Transcription
1 D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread) Features The depth is trimmed to 13.0mm, reducing the surface mounting K area by 20% compared with our subminiature connectors. * Compliant with RoS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details Standards 0 Recognized E Certified R20812 Right angle through-hole socket screw blocks(:6.3mm) having a inch thread : eight of the lock screw block (for s A, B & J) Circuits Gold-plated (flash) receptacle Gold-plated (0.76micron) receptacle KEY-15S-1A** KEY-15S-1A**14 RoS compliance This product displays (F)(SN) A on a label. Note: ** shows the location where a two-digit code (see the table below for codes) should be entered. For example, if a 15-circuit gold-plated (flash) socket with hexagonal lock screw blocks having a inch thread and with grounding adapters having a spring lock device is required, specify the model number as KEY-15S-1A3A. Q ty / With grounding adapters with a spring lock device 3A 1
2 D SUBMINIATURE CONNECTOR K SERIES Specifications Materials Contact Part name Insulator Shell Grounding adapter with spring lock device Model number identification Material and Finish Phosphor bronze, nickel-undercoated, Mating part; gold-plated Solder tail; tin-plated (reflow treatment) Glass-filled PBT, U94-0, black Steel, copper-undercoated, nickel-plated Brass, nickel-undercoated, tin/copper alloy-plated K E Y - 15 S - 1A 3 A 14 Series name Shell size: E Wire connection : Y... Right angle through-hole Number of circuits: 15 Connector : S... Socket Connector construction/dimensions: Standard K right angle through-hole s of grounding adapter: 3... With grounding adapters having a spring lock device of lock screw bock: A... screw blocks having a No. 4-40UNC inch thread B... screw blocks having an thread F... Without lock screw blocks, but with grounding adapters having a No. 4-40UNC inch thread G... Without lock screw blocks, but with grounding adapters having an thread... Without lock screw blocks, but with grounding adapters having an thread J... screw blocks having an thread Finish of mating part Blank... Gold-plated (flash) micron gold-plated micron gold-plated micron gold-plated Characteristics Current rating Voltage rating Temperature range Contact resistance Insulation resistance Withstanding voltage PC board thickness *Contact JST for details.,,,, (including temperature rise in applying electrical current) Initial value/max. After environmental testing/max. min. /minute PC board layout (viewed from component side) and Panel layout Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers. 2. ole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. B D F G screw blocks(:6.3mm) having an thread Without lock screw blocks F, G, : Grounding adapters have a thread (*1) for securing separatelypurchased lock screw blocks (*2) *1: inch thread FS-4S-( )1W(M) *1: thread FS-2.6S-( )1W(M) *1: thread FS-3S-( )1W(M) screw blocks(:6.3mm) having an thread 3B 3F 3G 3 3J 2
3 DJJJK SUBMINIATURE & K CONNECTOR SERIES Accessories/ock screw block A varietly of accessories are available for the D subminiature connectors. OCK SCREW BOCK exagonal lock screw block (inch thread: ) B / right right right K right Q'ty/ RoS compliance JFS-4S-C1N JFS-4S-B1W JFS-4S-C1W JFS-4S-B1WM JFS-4S-C1WM KFS-4S-C1N KFS-4S-B1W KFS-4S-C1W KFS-4S-B1WM KFS-4S-C1WM SFS-4S-B1W SFS-4S-B1WM SFS-4S-C1WM FS-4S-B1W FS-4S-B1WM FS-4S-C1WM exagonal lock screw & exagonal lock screw block (metric thread: ) B / right right right K right Q'ty/ RoS compliance JFS-3S-C1N JFS-3S-B1W JFS-3S-C1WM KFS-3S-C1N KFS-3S-C1W KFS-3S-C1WM SFS-3S-B1W SFS-3S-C1W SFS-3S-B1WM SFS-3S-C1WM FS-3S-C1W FS-3S-B1WM FS-3S-C1WM exagonal lock screw & 7
4 D SUBMINIATURE CONNECTOR JJJK & K SERIES exagonal lock screw block (metric thread: ) B / right right right K right Q ty/ RoS compliance JFS-2.6S-C1N JFS-2.6S-B1W KFS-2.6S-B1W KFS-2.6S-C1W SFS-2.6S-B1W SFS-2.6S-C1W FS-2.6S-B1W FS-2.6S-C1W JFS-2.6S-B1WM KFS-2.6S-B1WM SFS-2.6S-B1WM FS-2.6S-B1WM JFS-2.6S-C1WM KFS-2.6S-C1WM SFS-2.6S-C1WM FS-2.6S-C1WM exagonal lock screw & Rectangular lock screw block (metric thread: ) JFS-2.6R-N RoS compliance Spring washer... 1 pc. Set screw... 1 pc. Q ty/ 8
5 D SUBMINIATURE CONNECTOR JJJK & K SERIES Application examples of hexagonal lock screw blocks Total dimension 6.2 Connector flange Grounding adapter with threads The resulting total dimension from the connector flange to the top of the hexagonal lock screw block must be 6.2 mm after assembly. The D subminiature connector can be installed on the Panel by simply tightening the hexagonal lock screw block together with grounding adapter, which has an identical thread to that of the F, G, and s. eight of lock screw block 4.8 Panel thickness 0.8 PC board Spring washer thickness 0.6 DUST COVER (for receptacles) Circuits Q ty/ J-DCES J-DCES JDCES JST Material PA, U94V-0, black RoS compliance B JDCES-1 JST EXTRACTION TOO With this tool, contacts (connected to wires by crimping) can be easily removed if they are improperly inserted into plug and receptacle housings. Connector Plug Receptacle DEJ-0.3 KEJ-0.7 KEJ-0.4 9
Right angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
JK SERIES. SUBMINIATURE CONNECTOR Crimp style plug and socket. Features. Standards. Specifications CRIMP STYLE PLUG AND SOCKET
D SUBMINIATURE CONNECTOR Crimp style plug and socket CRIMP STYLE PLUG AND SOCKET JK SERIES 01 Crimp style plug Crimp style socket Pin contact Socket contact Features The dimples in the shell provide the
J DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses Costs
J DSUBMINIATURE CONNECTOR SERIES
J DSUBMINIATURE CONNECTOR SERIES Solder pot plug and socket SOLDER POT PLUG AND SOCKET 01 Solder pot plug Solder pot socket Features The socket contacts are formed by high-speed stamping presses to obtain
1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
RX CONNECTOR. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.54mm
RX CONNECOR mm Disconnectable Insulation displacement connectors for.27mm pitch ribbon cables pitch Features Conforms to MIL Standards s RX connectors conform to MIL standards (MIL-C-833) and are compatible
2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
CF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
6.2mm pitch/disconnectable Crimp style connectors. 1Certified LR R <Inner-housing lock>
6.mm pitch/disconnectable Crimp style connectors a 0 This VL connector is designed for wire-towire and wire-to-board 6.mm pitch connector corresponding to large current. Secondary retainer, which prevents
CZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
RFC CONNECTOR 2J Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The
CPTCONNECTOR. Board-to-wire. Features. Specifications
CPTCONNECTOR Board-to-wire Features Compact design.0mm pitch is realized miniaturization and low profile as the connector for automobile. Terminal construction Female terminal is designed for simple box
ZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
CZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors CZ connector: Side entry header CZ connector:
CF CARD CONNECTOR MA TYPE
CF Card 1.27mm (.5") pitch CF CARD CONNECTOR MA TYPE 5-circuit CF card connector Emboss Tape Features Socket Both dual-row straddle type and single-row SMT type sockets are available. Single-row SMT type
KR FAMILY SERIES KRW KR PHN TR CONNECTOR
KR FAMILY SERIESKRWKRPHNTR CONNECTOR 2.0mm pitch/disconnectable Insulation displacement and Crimp style connectors PH connector: header (for PHN and KR receptacles) TR connector: Unit for wire-to-wire
PA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
Universal MATE-N-LOK Headers for UMNL II Connectors
for UMNL II Connectors PC Board Vertical Pin Headers [6.5] Centerline spacing,, and 5 Circuit, In-Line Housing Nylon Flammability ating UL9V-0 Contacts Phosphor bronze Solder tail diameter.06 [1.57] elated
Y.COM.TW WWW. 0Y.COM.TW WW. Text D-Sub Connectors - XM3-L/XM2-L/XM4K/XM4L
The D-sub Connector Series Enters a New Era with Lead-free Products. Determine anchor screw diameters at a glance. Greatly simplified anchor combinations..t.100y. Shielded against EMI..T EMI/RFI shielded
HCMCONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications. Miniaturized Connectors, Compliant with the Automotive Performance Specifications
HCMCONNECTOR Board-to-wire/Wire-to-wire Features Miniaturized Connectors, Compliant with the Automotive Performance Specifications Boxed Female Terminal with Triple Over-stress Protection Mechanism Accept.
Filtered Combo D-Subminiature Connectors
Filtered Combo D-Subminiature Connectors Spectrum s line of filtered combo D-subs provide high insertion loss with tubular capacitive filtering. These connectors are available with 20 Amp power contacts,
FLZ CONNECTOR. 1Certified LR Connectors for FFC and FPC. Features. Specifications. Standards. 0.5mm
0.5mm (.020") pitch FLZ CONNECTOR Connectors for FFC and FPC Emboss Tape Features Zero insertion force mechanism ZIF mechanism increases wear resistance and extends the connector's mating life. Heat resistant
TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE. AMPLIMITE HDF for Flat Ribbon Cable. TE Internal Number:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS IDC D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 POS HDF RCPT, MS, LEAD FREE AMPLIMITE
PC CARD CONNECTOR C TYPE
PC Card 1.27mm (.050") pitch PC CARD CONNECTOR C TYPE 68-circuit PC card connector, conforming to PCMCIA/JEIDA Ver.4.1 Features Conformity to PCMCIA (USA) and JEIDA Ver.4.1 (Japan) The ICM-C connector
TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE Standard. TE Internal Number: Alias ID:
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS PCB D-SUB CONNECTORS TE CONNECTIVITY (TE) 09 MSFL RCPT RA 318 (IN,FM,BL) AMPLIMITE
USB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) IDC LOW PRO HDR 30P VERT LG LA AMP-LATCH
Introduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
(MR) Miniature Rectangular Connectors (Continued)
Product Facts Housings positively lock to help prevent accidental disengagement Either cap or plug housing can be mounted in same rectangular panel cutout without additional hardware UL94V-0 housings Plug
PSI CONNECTOR. 1Certified LR R Specifications. Standards. 4.0mm pitch/disconnectable Crimp style connectors
PSI ONNETOR.0mm pitch/disconnectable rimp style connectors Wire-to-wire type Secure locking structure Mis-mating prevention mechanism by keying ( to circuits/ kinds of keying) Finger-friendly design Large
Power Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
USB & IEEE 1394 FIREWIRE
USB & IEEE 1394 FIREWIRE UNIVERSAL SERIAL BUS & IEEE 1394 FIREWIRE INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable,
SM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
SN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
USB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
DUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
.093 Commercial Pin and Socket Connectors
Product Facts Polarised Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel-mounting
Micro D Series Filtered Connectors
Micro D Series Filtered Connectors For designs that require even smaller connector packages, API s Spectrum Control brand has designed a line of filtered Micro D-Subminiature connectors. This line of connectors
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
APPLICATION NOTES. Connectors for LED Lighting Applications. Co-Planar Board Mating FIG. 1
APPLICATION NOTES Connectors for LED Lighting Applications Mill-Max addresses the connector needs of the growing field of LED lighting applications with products such as receptacles and sockets suitable
Commercial MATE-N-LOK Connectors
MP Commercial MTE-N-LOK Connectors Product Facts Fully polarized nylon housings Easy cavity identification Locking devices are integral part of design. Connector halves will hold together under severe
Distributed by: www.jameco.com -800-8-44 The content and copyrights of the attached material are the property of its owner. Pin and Socket Mini-Universal MTE-N-LOK Product Facts Compact, durable housings
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
D-SUBMINIATURE PIN-IN-PASTE CONNECTORS
INPUT/OUTPUT CONNECTORS D-SUBMINIATURE PIN-IN-PASTE CONNECTORS OVERVIEW The D-Subminiature connectors are one of the most popular I/O solutions, addressing segments such as Telecommunications, Industrial,
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) A/L UNIV HDR 14P VERT AMP-LATCH Universal
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
USB, MINI USB, FIREWIRE & MINI FIREWIRE
INTRODUCTION: Adam Tech USB (Universal Serial Bus) and IEEE 139 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety of
XH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
EL CONNECTOR. Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
Mini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
SSL - Top Load Socket
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
AMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
0.5mm pitch stroke connector conforming to USB2.0 Standard. DD1 Series. [Plug] [Receptacle] [Cradle]
![0.5mm pitch stroke connector conforming to USB2.0 Standard. DD1 Series. [Plug] [Receptacle] [Cradle]](/thumbs/87/96326394.jpg "0.5mm pitch stroke connector conforming to USB2.0 Standard. DD1 Series. [Plug] [Receptacle] [Cradle]")
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke connector conforming to USB2.0 Standard DD1 Series CONNECTOR MB-0111-4 July 2006 RoHS Compliant Angle type Tilted type [Plug] [Receptacle] [Cradle]
Series 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
Universal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarisation Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation capability
Mini-Universal MATE-N-LOK 2 Connectors
MP Mini-Universal MTE-N-LOK 2 Product Facts One molded piece, secondary locking plug and cap housing assemblies Three-point stabilization to provide better terminal position Fully polarized to provide
IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41
IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil)
0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]
![0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]](/thumbs/85/92267767.jpg "0.5mm pitch stroke conforming to USB2.0 Standard. DD2 Series. [Plug] [Receptacle] [Cradle]")
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke conforming to USB2.0 Standard DD2 Series CONNECTOR MB-0112-3 July 2007 RoHS Compliant [Plug] [Receptacle] [Cradle] The DD2 series of connectors are
AMPMODU System 50 Connectors
AMPMODU System 50 Connectors (Page 52) (Page 44) (Page 8) (Page 40) (Page 45) (Page 9) (Page 1) (Page 29) AMPMODU System 50 (Page 4) (Page 0) (Page ) (Page 50) Double Row,.025 Ribbon Cable Mount Receptacle
AIT- CONNECTOR. Board-to-wire/Wire-to-wire. Features. Specifications
AIT- CONNECTOR 0.4 unsealed low-profile connector series for use in a wide range of automotive applications. Board-to-wire/Wire-to-wire Features Ultra Low Profile Connector Over 30% Height uction as compared
8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
SW IP67 Waterproof Series - Part Numbering
SW IP67 Waterproof Series - Part Numbering Part Numbering Features Excellent performance at low cost Screw mounting assures solid connection Rubber gasket assures water resistance Manufactured with precision
Catalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
ITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
The con ectors serve low durability cycle applications
Power Connectors & Interconnection Systems Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
IEEE 1394 Connector. Range Overview IP Receptacle to Overmolded with Cable In Line. Accessories. IEEE 1394 Connector I Range Overview
Amphenol TW Innovation in Waterproof Solution CATAOGUE http://www.amphenolltw.com IEEE 1394 Connector I Range Overview IEEE 1394 Connector IP 67. 68 Unmated or Mated 9 Range Overview to In ine Accessories
0.5mm pitch stroke connector conforming to USB2.0 Standard CONNECTOR MB November DD1 Series. Reverse type.
COMPONENTS PRODUCT INFORMATION NEW 0.5mm pitch stroke connector conforming to USB2.0 Standard CONNECTOR November 2006 DD1 Series RoHS Compliant Reverse type Standard type Angle type Tilted type [Plug]
ST Series - Part Numbering
- Part Numbering Features Super-miniature size with multiple contact Safe insert system preventing pin damage Applications Professional A/V Measuring equipment Sensors Wireless radio Medical Part Numbering
BOARD-TO-BOARD HEADERS & RECEPTACLES
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS BOARD-TO-BOARD HEADERS & RECEPTACLES TE CONNECTIVITY (TE) FB-5R,ASY,30,SIG,REC,SL,2.73
CABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
Top Load Socket: BTB
The 9159 series of Board-to-Board interconnect system allows two PCB's to be mated end-to-end creating strips of LED lighting. Designed specifically for the unique Solid State Lighting (SSL) market requiring
SEPTEMBER C.CS.1000 / GB
SEPTEMBER 2005 - C.CS.1000 / GB C R I M P F L E X C O N N E C T O R S CRIMPFLEX connectors TECHNICAL DATA MATERIAL Phosphor bronze MALE SOLDER TAB PLATING The standard connector is tin plated (thickness
RIBBON CABLE CONNECTORS
TE Connectivity: Every Connection Counts 2015 TE Connectivity Ltd. family of companies. All Rights Reserved CONNECTORS RIBBON CABLE CONNECTORS TE CONNECTIVITY (TE) 20 NOVO MIL/CTR 15DP,LEAD FREE 1658621-4
Introduction to High Current Card Edge Connectors
Introduction to High Current Card Edge Connectors Product Facts Contacts on.100 [2.54] Centerlines Selective gold plating of contacts for high performance at low cost Flow solder applications Glass-filled
Elma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
MRJR Rugged RJ45 Connector
MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.6 MRJR-3461-0F Shown 6 Position RJ11, Vertical PCB Tail MRJR-5381-01 Shown 8 Position RJ45, MRJ/MRJR PCB Options MRJR-5481-0C Shown 8 Position
SD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM. US Patent # 6,299,492 B1 2. POWER, RIGHT ANGLE EARLY 3. POWER, RIGHT ANGLE EARLY
HIGH POWER HOT PLUGGABLE INTERCONNECTION SYSTEM US Patent # 6,299,492 B1 The HOTMATE board to board interconnection system provides a unique method of transferring hot pluggable power requirements within
AC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
Dura-ConTM Hermetic Connectors
Dura-ConTM Hermetic Connectors Standard Connectors With High Performance Hermetic Seals Catalog cinch.com Cinch Dura-Con Hermetic Connectors offers a high performance hermetic seal designed into our standard
400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated IP69K, Tested in accordance with DIN 40050/Part 9 IP6k9k USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof
Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
(Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications Fine Pitch SMT Stacking Connectors (Parallel oard-to-oard) Stacking Height Guide for Parallel oard-to-oard pplications
Standard Buccaneer BUCCANEER FOR POWER
IP8 rating tested at 1.05kg/sq cm (15lb/sq in) 10m depth for weeks and.8kg/sq cm (10lb/sq in) 100m depth for hours IPK, Tested in accordance with DIN 0050/Part IPkk Water and dustproof to IP8 when mated,,,,,,
V.35 - Interface connectors
V.35 DTE/DCE Interface connectors Description The Telecommunications Standardization Sector TSS V.35, formerly CCITT V.35 is the international standard termed Data Transmission at 48 Kbps using 60-108
EL CONNECTOR. Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 4.5mm
Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style Wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
USB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism