TunnelCam Ultimo Rugged stainless steel fixed camera for tunnel applications

Transcription

1 Rugged stainless steel fixed camera for tunnel applications Corrosion-free 316L stainless steel housing Small form factor, mount anywhere Hassle-free optical zoom block, focus assist Nano-coated window for optical sensor, no need for a wiper Optional high-end thermal vision core with germanium window Dual vision from same POV in one camera Automatic traffic incident detection-ready Optional MPEG-2/MPEG-4 codecs version * mounting not included Description The TunnelCam Ultimo is designed especially with the harsh environment of traffic tunnel applications in mind. It can be used on the roadside as a rugged fixed camera as well, though. It delivers high-quality, highdefinition images. The remote zoom and focus lens guarantees maximum ease of installation and remote adjustment. The included versatile mounting bracket makes it possible to position the camera at the exact horizontal and vertical angle needed for optimal view. Multi codec high definition The TunnelCam Ultimo has multiple-stream capability for simultaneous transmission of one or more H.264 streams combined with MJPEG. In addition, MPEG-2 and MPEG-4 streaming in different aspect ratios without scaling or transcoding will be available as an option. This guarantees interoperability with existing Traffic Center systems without added latency caused by transcoding. Multiple combinations of resolution and frame rate can be configured to satisfy different live viewing and recording scenarios. Open standards Its careful assembly and compliance to open standards ensure that the TunnelCam Ultimo integrates with the most common VMS systems right out of the box. Being ONVIF Profile S compliant, the camera is supported even if your software does not have a dedicated driver. The HTTP API ensures ease of programming in case a dedicated software solution is required. This specifically enables the deployment in projects with custom requirements. Backlight compensation and wide dynamic range The TunnelCam Ultimo is designed to produce colour pictures of the tunnel with adjustable white balance and hue to compensate for varying lighting conditions. Backlight compensation and extensive wide dynamic range functions enhance image quality in difficult lighting situations, ensuring quality pictures even in case of challenging vehicle headlight scenes. Thermal vision Besides optical camera models, the TunnelCam Ultimo series includes models which add thermal vision by means of a high-end thermal imager. This allows you to choose the model which best suits your needs: optical or optical/thermal (hybrid). Connectivity Models are available to connect the camera to Ethernet (RJ-45), directly to fiber or directly to existing coax.

2 Mechanical Housing materials Coating Mounting Connectivity Dimensions (h x w x d) Weight Stainless steel 316L housing Nano glass window for optical sensor The thermal sensor has germanium window powder coating, RAL9016 XCUWM01 bracket for Wall / Pole mounting XCUCM01 bracket for Ceiling mounting Models available with housing connectors Models available with 1m cabling Housing only: 92 x 159 x 329 mm Mounted on XCUWM01: 235 x 159 x 454 mm (in line with bracket) Mounted on XCUWM01: 235 x 335 x 333 mm (perpendicular to bracket) Mounted on XCUCM01: 240 x 225 x 329 mm 4kg Optical zoom block M1 M3 Image sensor 1/3" Sony 2.0MP STARVIS CMOS 1/2.8 Sony 2.38MP Exmor CMOS Output resolutions 1920x1080, 1280x1024, 1280x720, 960x480, D1, 4CIF, VGA, 2/3 D1, 1/2 D1, 2CIF, CIF, QCIF, QVGA Effective pixels 2 MP 2 MP Shutter speed 1/25(30).. 1/30000 s 1/1.. 1/10000 s Minimum scene illumination Color: 0.02 B/W: x1080, 1280x1024, 1280x720, 960x480, D1, 4CIF, VGA, 2/3 D1, 1/2 D1, 2CIF, CIF, QCIF, QVGA Color: 0.35 Horizontal field of view deg deg Focal length mm (F1.8.. F3.0) mm (F1.8.. F3.4) Wide dynamic range On, Off On, Off WDR value 120 db 130 db Backlight compensation BLC, HLC BLC, HLC White balance Auto, Manual Auto, Manual Focus control Manual adjust, Push AF Auto, Manual, Push AF Iris control Auto Auto Saturation Manual Manual Exposure Auto, Shutter priority Auto, Manual Brightness Manual Manual Contrast Manual Manual Sharpness Manual Manual Noise reduction 2D, 3D 3D Defog Off, Low, Middle, High Yes Day/night (IR-cut filter) Auto, On, Off Auto, On, Off Optical zoom 10x 10x Digital zoom 16x 12x page 2 of 10

3 Thermal core Focal lengths 9 mm 13 mm 19 mm 25 mm 35 mm 640 : 336 : Field of view (H x V) 640 : 336 : f/1.4 f/ x x 27 f/1.25 f/ x x 19 f/1.25 f/ x x 13 f/1.1 f/ x x 10 f/1.5 f/ x x 7.1 Class Pro Radiometric Commercial System type Microbolometer 640 : 336 : Pixel size 640 : 336 : Uncooled LWIR thermal imager 640x512 VOx 336x256 VOx 17 µm 25 µm Uncooled LWIR thermal imager 640x512 VOx 336x256 VOx 17 µm 25 µm Uncooled LWIR thermal imager 640x512 VOx 336x256 VOx 17 µm 25 µm Spectral Band µm µm µm NETD <50mK <50mK <60mK Radiometry Basic (Spot temp, Isotherms, low-gain) Advanced Operating temperature -40 ~ 80 C -40 ~ 80 C -20 ~ 55 C Speed Fast Slow Video rate 60 Hz 7.5 Hz None Video Optical OR Thermal Optical AND Thermal Video encoder 1 H.264 or MJPEG Optical, H.264 or MJPEG Video encoder 2 H.264 or MJPEG Thermal, H.264 or MJPEG Video encoder 3 - Optical+Thermal, H.264 or MJPEG Number of streams Max. 20 streams per encoder Total number of streams 80 Mbps max total bitrate Snapshot JPEG pull, FTP push Image rotation Mirror, Flip Network Interface(s) Protocols 100 Mbps FE Ethernet; models available for RJ45 or M12 X8, Direct to fiber (2SM Single mode dual LC, 2MM Multi-mode dual LC), Direct to Coax (EOC, Ethernet over Coax) IPv4, TCP/IP, UDP, RTP, RTSP, HTTP, HTTPS, ICMP, FTP, SMTP, DHCP, PPPoE, UPnP, IGMPv1/2/3, SNMPv1/2, QoS, ONVIF, 802.1X, NTCIP page 3 of 10

4 Powering Power consumption Power 230 : 24 : PoE+ wiring recommendation 15W (heater off), 25W (heater on) 100 ~ 240 Vac, or 24 Vac, or 24 Vdc, or PoE+ 24 Vac, or 24 Vdc, or PoE+ Wiring resistance < 12.5 Ω, e.g. max. 100m AWG24 (IEEE clause ), PSE >= 50V Environmental Operating temperature -30 C / -22 F to +65 C / 149 F Relative humidity 0% to 100% Ingress protection IP66 / IP67 page 4 of 10

5 Ordering information TCU Power Optical Thermal Fw Cabling Aux Examples: TCU230M1-M12X8 TCU24M3T19F-2SM TCU24T9SC3 (empty) M1 M3 (empty) T f s c r (empty) -MC (empty) -M12X8-2SM -2MM -EOC -CBL -CBLEOC (empty) -AUX01 Powering specification 230 for Line voltage (100 ~ 240 Vac) / 24 Vdc / 24 Vac / PoE+ 24 for 24 Vdc / 24 Vac / PoE+ Optical sensor M m for Optical zoom block m = zoom block model, 1 for standard 10x, 3 for high end 10x Thermal vision sensor T f s c r for Thermal vision core Firmware variation (empty) for base firmware f = focal length 9, 13, 19, 25, or 35 mm s = fps speed (F for Fast (>= 9 fps), S for Slow (< 9 fps) ) c = class (empty for Pro, R for Radiometric, C for Commercial grade) r = resolution (empty for 640x512, 3 for 336x256) -MC for multi-codec firmware, adds MPEG-2/MPEG-4 encoding Note: model not yet available Cabling specification (empty) RJ45 and Power connector at housing; Cables/cable connectors not included -M12X8-2SM -2MM -EOC -CBL -CBLEOC M12 X8 (and Power) connector at housing; Cables/cable connectors not included Dual LC SM (and Power) connector at housing; Cables/cable connectors not included Dual LC MM (and Power) connector at housing; Cables/cable connectors not included Power connector at housing and Coax connector (for Ethernet over Coax) via 1m cable; Cables/cable connectors not included RJ45 and Power cabling 1m Cable connectors not included Coax cable 1m (for Ethernet over Coax) Cable connectors not included a = aux cable specification (empty) no aux cable -AUX01 coax cable for audio input page 5 of 10

6 Ordering information (continued) Mounting accessories XCUWM01 XCUWM02 XCUSW01 XCUCM01 XCUCM02 XCUSS01 XCUFP01 Wall/Pole mount for TCU/MCU, with swivel Wall/Pole mount for TCU/MCU, without swivel Swivel mount for TCU/MCU Ceiling mount for TCU/MCU Ceiling mount for TCU/MCU Sunshield for TCU/MCU Fall protection cable for fixing TCU camera to TCWM01/02 Cable connectors XCUCNC-PWR01 XCUCNC-M12X8 XCUCNC-RJ45 XCUCNC-2MM XCUCNC-2SM XCU IP67 Power connector straight, 3-pin 7/8 connector, female (cable part) XCU IP67 Ethernet connector straight, M12 X-coded Ethernet connector (cable part) XCU IP67 Ethernet connector straight, RJ45 Ethernet connector (cable part) XCU IP67 Ethernet connector straight, Dual LC MM fiber connector (cable part) XCU IP67 Ethernet connector straight, Dual LC SM fiber connector (cable part) Cables XCUCBL-PWR01-2M XCUCBL-PWR01-6M XCUCBL-M12X8-2M XCUCBL-M12X8-6M XCU Power cable 2m 3x1.5mm2 TPU with 3-pin 7/8" connector XCU Power cable 6m 3x1.5mm2 TPU with 3-pin 7/8" connector XCU CAT6 2m, Ethernet patch cable with 8-p X-coded connector and RJ45 XCU CAT6 6m, Ethernet patch cable with 8-p X-coded connector and RJ45 page 6 of 10

7 Dimensions page 7 of 10

8 Mounting accessories XCUWM01 Wall/Pole mount for TCU/MCU, with swivel page 8 of 10

9 Mounting accessories XCUCM01 Ceiling mount for TCU/MCU page 9 of 10

10 Cable connectors XCUCNC-PWR01 XCU IP67 Power connector straight, 3-pin 7/8 connector, female (cable part) XCUCNC-M12X8 XCU IP67 Ethernet connector straight, M12 X-coded Ethernet connector (cable part) XCUCNC-RJ45 XCU IP67 Ethernet connector straight, RJ45 Ethernet connector (cable part) XCUCNC-2MM XCUCNC-2SM XCU IP67 Ethernet connector straight, Dual LC MM/SM fiber connector (cable part) The quality management system used in the development, production, sales, and support of this product is ISO 9001 certified by LRQA. Siqura B.V Version Subject to modification. page 10 of 10