WiFi Security Camera User Manual

Transcription

1 WiFi Security Camera User Manual

2 Prepara on Before Use 1. Smartphone/ Tablet PC Version request: ios 7.0 above / Android 3.0 above 2. OCam-M3 3. A Wi-Fi router that can be connected to the Internet. 4. Micro SD memory card is required for recording. (More than 16GB/Class6 is recommended) 5. Includes: a. OCam power adapter b. Mount c. Stand d. Screws x 3 e. Plas c x 3

3 Contents 1. Product Introduc on 1.1 Hardware 1.2 So ware 2. Se ng up Camera 3. Add My Carmera 4. Viewing Camera image & screen introduc on 4.1 Live view 4.2 Introduc on of live view 4.3 Icon instruc ons as below 4.3.a Admin privileges 4.3.b Op ons for sound 4.3.c Recording and Viewing saved images 4.3.d Snap shots and Viewing saved images 4.3.e Full screen and Image Rota on 5. Connect Other Camera 5.1 To connect to the camera of same network 5.2 To connect to remote camera (not from the same network) 6. Camera Se ng 6.1 Camera Name 6.2 Delete Carmera 6.3 Video Se ng 6.4 Advanced Se ng 6.4.a Mode Se ng 6.4.b Camera Password Se ng 6.4.c Se ng Admin Password 6.4.d Event Viewing 6.4.e Mo on Detec on Se ng 6.4.f Sound Detec on Se ng 6.4.g Memory Card Se ng 6.4.h Recording Se ng 6.4.i Video Playback 6.4.j System Informa on 6.5 Mo on and sound detec on no fica on 6.5.a Mo on detec on no fica on 6.5.b Sound detec on no fica on 7. Scene Mode Introduc on 8. Factory Default Recovery 9. Firmware Update 10.Troubleshoo ng & Support 11. Maintenance P.1 P.1 P.1 P.2 P.3 P.7 P.7 P.7 P.8 P.8 P.8 P.8 P.8 P.9 P.10 P.10 P.10 P.11 P.11 P.11 P.11 P.12 P.12 P.12 P.13 P.13 P.13 P.14 P.14 P.14 P.15 P.15 P.16 P.16 P.16 P.17 P.19 P.19. P.20 P.21

4 P.1 1.Product Introduc on 1.1 Hardware Product Introduc on OCam Body Status indicator IR Lights Hanging hole Speaker Light sensor Microphone Memory card slot Holder socket Power port OCam-M3 S/N: UID FCC ID:2AA8WOCAM-M1 UID:AAAABBBBCCCCDDDDEEEE SSID:OCAM-X1PP78 Reset bu on Stand Mount Adapter Produc on numbers OCam WiFi name Product name OCam UID numbers OCam-M3 S/N: FCC ID:2AA8WOCAM-M1 UID:AAAABBBBCCCCDDDDEEEE SSID:OCAM-X1PP78 UID QR Code Cer fica on numbers 1.2 So ware Download OCam from Google Play/Apple App Store and install on your smartphone or Tablet PC.

5 P.2 2. Se ng up the Camera 2.1 To put the camera on the table, please follow the instruc on below: 1 Insert the holder into the holder socket 2 Make sure the bo om of OCam into the right posi on 3 Complete Se ng up the Camera 2.2 To fix the camera on the wall, please follow the instruc on below: A ach the wall mount to your wall or ceiling using the screws included in the box. 1 2 Mount your camera by fi ng the base into the wall mount. Further Explana on: a ach the plas c anchor to your cement wall before you mount the camera on a wall. (Only used when the wall are hard like the cement wall) 2.3 Connect the product to power (shown below), and wait un l the indicator light goes flashing. If you need to do recording, please insert the Micro SD card.

6 P.3 Connec ng to the Camera 3. Add My Camera First me connec on se ngs Step 1. Please wait for 30 seconds a er the product connects to power. The indicator light would flash red and blue as picture below. Step 2. Turn on the WiFi on smartphone or tablet PC and search OCAM-XXXXXX (refer the label on the back of OCam) for connec ng. The default password is ios Android AT&T Step 3.Turn on the OCAM APP OCAM

7 Step 4. Enter the camera list and choose Add My Camera. Camera list (Please choose the camera) Add My Camera? Info Connect Other Camera Rescan Camera Connec ng to the Camera If no OCam device is detected, please quit the APP and go back to Step 2. Note that for the ios devices, please click home bu on to exit APP. Quick Start Guide! Didn't detect any OCam Exit OCam APP and go to Wifi setting page on your smart phone/tablet, enable the WiFi and follow the OCam quick start guide in the box. Re-open OCam App after your smart phone/ tablet connect to the OCam. Exit App Step 5. Please set the admin password and then click Next. Setting Admin Password Admin Please set the admin password Re-enter the admin password Show password Admin password is required when doing advanced settings P.4 Back Main Next

8 Connec ng to the Camera Step 6. Please choose the Wireless Network for connec ng OCam. ( AE-1 in the following example) Please select the WiFi to connect AE-1 HOME-2F ANGEL.CHIH Back Main Next Step 7. Please enter the Wireless Network password. Enter The WiFi Password AE-1 Enter The Password Show password Back Main Next You will see the picture below for entering the incorrect Wireless Network LAN password. Please go back to Step 6-7 again. WiFi password is incorrect Please re-enter the password P.5 Confirm

9 Step 8. Please wait for about 60 seconds for connec ng to the Internet. Click Confirm when connec on is completed. The camera setup process completed In connecting, Please wait 60 seconds Please do not unplug OCam from power or close the App until setting completed. Connec ng to the Camera Confirm Step 9. Connected camera will be shown in the list. Camera list (Please choose the camera) Camera Online UID 888ABCDEFGHIJKLMN888 Add My Camera Connect Other camera? Info Rescan Camera P.6

10 4. Viewing Camera image & screen introduction 4.1 Click the camera icon in the list for instant image. (Picture of camera list added) Camera list (Please choose the camera) Baby Room Online UID 888ABCDEFGHIJKLMN888 Add My Camera Connect Other camera 4.2 Introduc on of live view? Info Rescan Camera Viewing Camera image & screen introduc on Baby room 888ABCDEFGHIJKLMN888 Online/LAN 320x180 / FPS:10 / bps: 439Kbps Online user: 2 / Frame Ratio: 0/84 SCENE Main Scenario mode P.7

11 P Icon instruc ons. Snap shot Album ios Record Replay Flip Ver cally Flip Horizontally i System Informa on Sound Album Snap shot Flip Ver cally Flip Horizontally Android Record Full Screen Replay Sound Viewing Camera image & screen introduc on Grey points as unrecording. Click it without inser ng card will pop out the prompt window, No SD card detected. Please insert SD card for recording func on. Note that there is no Full Screen icon in the ios devices, rotate the device when you need to view full screen video. 4.3.a Some func ons require admin privileges for se ng modifica on. There will be the lock icons for non-admin users. Click and insert admin password for ac va on. Monitoring Window op ons for non-admin password Scene S mula on. SCENE 4.3.b Mute to turn off the microphone and speaker of the camera. Listen to monitor the microphone of camera via smartphone/ tablet PC Speak to broadcast via the camera speaker by using smartphone/ tablet PC Click on Sound for op on menu Mute Listen Speak

12 P.9 Viewing Camera image & screen introduc on 4.3.c It shows inserted, click Click on without inser ng memory card. A er memory card, the recorded images will be saved in the card. for replaying the images recorded. 4.3.d Click to capture the monitoring image and save it to the memory of smartphone. Click on to see the pictures just taken. 4.3.e Click Click Click for ver cal flip and click again for original image. for horizontal flip and click again for original image., it will automa cally turn into horizontal full screen.

13 5. Connect Other Camera To add other camera, please choose Connect Other Camera. Camera list (Please choose the camera) Baby Room Online UID 888ABCDEFGHIJKLMN888 Grad Pa House Online UID V3D Living Room Offline UID V3D Rucca Offline UID V3D Add My Camera? Info Connect Other Camera Rescan Camera 5.1 To connect to the other camera of local network, select the camera and Click on Next and enter password to complete the connec on. ( The default se ng camera password: admin ) Select The Camera Connect Local Camera 888ABCDEFGHIJKLMN ABCDEFGHIJKLMN ABCDEFGHIJKLMN Adding Exis ng Connect Remote Camera Setting Remote Camera Back Main Next 5.2 To connect to remote camera (not from the same network), please enter related informa on as instruc ons below Connect Remote Camera Camera UID QR Code Enter the camera password Show password Camera Name P.10 Back Main Next

14 6. Camera Se ng 6.1 Camera Name Se ng Camera Name Setting 888ABCDEFGHIJKLMN888 Camera Name Back Main Confirm 6.2 Delete Camera Delete Camera Baby room 888ABCDEFGHIJKLMN888 Are you sure to delete this camera? Camera Se ngs Back Delete 6.3 Video Se ng Video Setting Video Setting Frequency 50Hz 60Hz Live View Resolution QVGA 320*180 VGA 640*360 HD 1280*720 H.264 quality 512 Kbps 256 Kbps 192 Kbps H.264 quality 512 Kbps 256 Kbps 192 Kbps Frame Rate 30fps 25fps 20fps 15fps 10fps 5fps Back Main Confirm Back Main Confirm P.11 The Frequency, Live View Resolu on and compressed format can be adjusted. (Tips: For HD 1280x720, it requires 2Mbps upload bandwidth. VGA or QVGA is recommended for be er image resolu ons if having not enough bandwidth.)

15 6.4 Advanced Se ng Camera Setting Camera Name Setting Delete Camera Video Setting Advanced Setting Advanced Setting Mode Setting Camera Password Setting Admin Password Setting Event Viewer Motion Detection Setting Sound Detection Setting Memory Card Setting Recording Setting Video Playback System Information Main Confirm 6.4.a Mode Se ng Mode Setting Baby Monitor Children Safety Elderly Care Home Security Pet Monitor Traveling Mode Standard Mode OCam has 7 exclusive scene modes. The default se ng is Baby Monitor mode; the user can change the se ngs on the page of instant viewing or advanced se ngs based on requirements. 6.4.b Camera Password Se ng Main Camera Se ngs Camera Password Setting 888ABCDEFGHIJKLMN888 We recommend that 8-12 character password is o en considered good protec on for your OCam Network Security. Enter Your Old Password Camera New Password Re-Enter Your New Password Show password P.12 Back Main Confirm To change the camera password, please enter the old password and then type in the new password twice for confirma on. Note: The remote devices will be unavailable to view once the password is changed. Please enter new password for re-connec on.

16 6.4.c Se ng Admin Password Setting Admin Password Admin Please enter the old admin password Please set the admin password Re-enter the admin password Show password Admin password is required when doing advanced settings. Back Main Confirm To change the admin password, please enter old password and type in the new password twice for confirma on. 6.4.d Event Viewer Event Viewer Motion detection events 14/08/06 15:58 Motion detection events 14/08/08 08:00 Sound detection events 14/08/09 23:11 Camera Se ngs Confirm 6.4.e Mo on Detec on Se ng Motion Detection Setting Motion Detection Yes No Only record when the camera detect the moving object Please adjust the area for motion detection Event Notifications Setting Back Confirm P.13 Turn on the mo on detec on, you can manually choose the range of movement monitoring. (Original default is full screen)

17 6.4.e Mo on Detec on Se ng- Se ng Setup your , support gmail, yahoo and hotmail, refer below picture and fill SMTP informa on Setup your , support gmail, yahoo and hotmail, refer below picture and fill SMTP informa on Setting Record Setting SMTP Sever name smtp. gmail.com Port Number 465 SMTP Account SMTP Password Server Name Select below type to SSL / TLS. APP will setup 465 automa cally User SMTP Password ********* Recipient address 12345@gmail.com Security Type None STARTTLS SSL/TLS Password User Select bu on Back Confirm Back Confirm 6.4.f Sound Detec on Se ng Sound Detection Setting Sound Detection Yes No Volume Sensitivity Low High Camera Se ngs Back Confirm 6.4.g Memory card se ng Memory Card Setting Safely remove the memory card P.14 Back Main Confirm

18 6.4.h Recording Se ng Recording Setting Recording Quality HD VGA Back Main Confirm 6.4.i Video Playback Video Playback Rec-H x360_ _ avi Rec-H x360_ _ avi Rec-H x360_ _ avi Camera Se ngs Back Main 6.4.j System Informa on System Information APP Version: 1.00 Camera name AHOKU-OCam-XXXX Camera UID 888ABCDEFGHIJKLMN888 Copy UID Back Main P.15 Click on Copy UID to automa cally copy the UID words and sent it to others (For adding remote camera)

19 P Mo on and sound detec on no fica on 6.5.a Mo on detec on no fica on: You can manually choose monitoring range, OCam will send no fica on and starts recording for any movement in the selected area. Motion Detection Setting Motion Detection Yes No Only record when the camera detect the moving object Please adjust the area for motion detection Event Notifications Setting Back Confirm 6.5.b Sound detec on no fica on: You can adjust the sound sensi vity and it will send no fica on when any sound is detected. Sound Detection Setting Sound Detection Yes No Volume Sensitivity Camera Se ngs Low High Back Confirm

20 P.17 Scene Mode Descrip on 7. Scene Mode Descrip on OCam has 7 exclusive scene modes and the ini al se ng is Baby Guard mode; user can change se ngs on the page of instant viewing or advanced se ngs based on requirements. The descrip on and parameters se ngs are as below: A. Baby Monitor When detec ng baby s crying or abnormal sound in the environment, the systems will immediately send out no fica ons to remind the parents and start recording automa cally for 1 minute to ensure children s safety. B. Children Safety When the system detects children arriving home, it will immediately send no fica ons to parents. Parents can remind the children to be safe via the broadcast func on. (The default is message no fica on. Please set up for no fica ons.) C. Elderly Care For elderly care, with the full me recording, it can avoid missing any possible accident, and be updated with the situa on without being there through the monitoring func on.

21 P.18 D. Home Security The se ng with memory card over 8G, the 24hrs home recording history can be saved clearly. E. Pet Monitor Pets are o en alone at home, when their sound is detected, you can immediately view the instant image and use voice to comfort or correct the pet s behavior. F. Travel mode The se ng with memory card over 8G can save the recorded moving records for more than 1 week. User who is not home will be receiving of message for any movement in the house. (The default is message no fica on. Please set up for no fica ons.) Scene Mode Descrip on G. Standard Mode User can adjust the se ngs based on preferences.

22 P Factory Default Recovery Please use a thin needle to press in the RESET hole in the back of OCam for 8 seconds and release. There will be beep sound as recovering the factory default. OCam-M3 S/N: UID FCC ID: 2AA8WOCAM-M1 UID:AAAABBBBCCCCDDDDEEEEE SSID:OCAM-X1PP78 Reset bu on 9. Firmware Update Please use a thin needle to press in the RESET hole in the back of OCam for 8 seconds and release. There will be beep sound as recovering the factory default. Installa on steps as below Step 1. Download the updated version of firmware to the Micro SD card. (h p:// Step 2. Connect the OCam to power. Step 3. Insert Micro SD card into the memory card slot of OCam. Step 4. The OCam will update automa cally and using voice prompt to inform the update comple on. Step 5. Please remove the memory card once the update is completed. Factory Default Recovery / Firmware Update

23 P.20 Troubleshoo ng & Support 10. Troubleshoo ng & Support If your smartphone or tablet cannot be connected to OCam, please follow the instruc ons below: 1. Make sure the power cord is fully plugged in. 2. Make sure OCam s power indicator light goes flashing. 3. Make sure OCam is in the WiFi available connec ng area with the smartphone/ tablet. 4. Make sure OCam is in the available area of the Wi-Fi router. 5. Make sure you insert the correct camera password 6. If OCam would be changed to different WiFi area, you need to reset the camera and setup again. (Please follow the No.3 content of the manual of add my camera for reference.

24 11. Maintenance 1. Keep children away from all the spare parts and accessories. 2. Finger prints and stains will have nega ve influence on the camera lens. Please avoid touching the lens with hands. 3. Please use so cloth to wipe the lens for any stain or dust occurs. 4. Please keep the camera dry. Rain, humidity or any liquid includes minerals will cause circuit corrosion. 5. Please do not use or store the camera in areas of dust and dirt. 6. Do not store the device in areas of high temperature. It would shorten the using me of electronic devices and even melt specific plas c parts and cause deforma on. 7. Do not store the device in areas of low temperature. When the system is warming up (back to normal temperature), the moisture will be formed inside the case and may cause damage to the circuit board. 8. Please do not try to open the case. System may be damaged without professional opera on. 9. Avoid dropping or striking the device. 10. Please use the accompanied or a ached power supply to operate the device. 11. Do not overload the power plug or extension cord or may cause fire or electric shock. P.21 Maintenance