LED LED

Transcription

1 atlas LED Active Cooler 2. Aluminum Heat Sink & Driver (not shown) 3. Thermal Pad 4. LED Array: (Qty 9) 2.4W each 3116K, 85CRI, Approximately 664 Delivered Lumens with 21,617 candelas at Clear Lens Assembly 6. 14, 33 or 10x40 Lenses (shown with optional lenses installed) 7. Snoot (not shown) optional 6. The LED (19.2 total watts) lamp is an energy efficient alternative for a 120 watt PAR 38 Spot or 71 watt MR16 lamp. See p. 173 for Web site verification. 14

2 scope led (p. 17) LED FIXTURES ATLAS LED (p. 19) LED (Light Emitting Diode) or SSL (Solid State Lighting) Advantages when properly designed: Energy consumption reduced 50% to 82% over an incandescent lamp source Lamp Life: 50,000 hours average based on 70% lumen maintenance High color rendering (82-94 CRI*) Warm-white color temperatures with tight binning* Superior optical control Dimmable with specified controls No UV or IR rays: ideal for artwork, produce and fabrics LEDs do not contain mercury and are RoHS compliant Three year warranty on all LED products NAUTILUS LED (p. 21) Wattage measures energy consumed, lumens measure light produced Incandescent 9 lumens per watt Halogen 15 to 20 lumens per watt LEDs 40 to 90 lumens per watt with precision beam control Fluorescent 50 to 90 lumens per watt (contains mercury) Metal Halide 70 to 90 lumens per watt (contains mercury) Lumens per watt is just part of the story, for directional lamps (MR16 PARs, etc.), center beam candle power (candela) and footcandles tell the full story. See p. 173 for LED to Halogen Comparison Chart or p.173 for Web site verification. CHOPPER with LED MR16 (p. 45) LED Fixture Heads A Lighting Facts Label verifies data of IESNA LM-79 testing as required by the United States Department of Energy (DOE). LED products featuring this label have been tested by ITL testing labs and comply with LM-79. In addition, DOE monitors the accuracy of reported product performance, on a sampling basis, through its CALiPER testing program. Light Output/Lumens Measures light output. The higher the number, the more light is emitted. Reported as Total Integrated Flux (Lumens) on LM-79 test report. Watts Measures energy required to light the product. The lower the wattage, the less energy used. Reported as Input Power (Watts) on LM-79 report. Lumens per Watt/Efficacy Measures efficiency. The higher the number, the more efficient the product. Reported as Efficacy on LM-79 test report. IESNA LM Industry standardized test procedure that measures performance qualities of LED luminaires and integral lamps. It allows for a true comparison of luminaires regardless of the light source. Lighting Facts LED Product Light Output (Lumens) 664 Watts 19 Lumens per Watt (Efficacy) 35 Color Accuracy 80 Color Rendering Index (CRI) Light Color Correlated Color Temperature (CCT) 3100 (Warm White) Warm White Bright White Daylight 2600K 3200K 4500K 6500K Visit for the Label Reference Guide. All results are according to the IESNA LM : Approved Method for the Electrical and Photometric Testing of Solid State Lighting. Brand X: 18756CHT564RGHT1234H3 Color Rendering Index (CRI) Measures color accuracy. Color rendition is the effect of the lamp s light spectrum on the color appearance of objects. Correlated Color Temperature (CCT) Measures light color. Cool colors have higher Kelvin temperatures ( K); Warm colors have lower color temperatures ( K). Brand & Model Number * See lighting terms and definitions, p

3 Scope LED Interior Design by Lukas Machnik 16

4 SCOPE LED fj-sco-1- fj-sco-1-bz Antique Bronze Designed by Gregory Kay Patent Pending LED Fixture Heads fj-sco-1-pn fj-sco-1-wh White The Scope LED, a classic flat-back cylinder fixture, features a rotating lens to modify the beam diameter from 20 spot to 50 flood. The cool-to-touch lens allows adjustment while the fixture is lit. Supplied with Soft Focus Lens as shown above. Shown at right without lens producing a sharp edge beam. system compatibility height LAMP SPEciFICATIONS 12VAC Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering LED canopy mount and LED track transformer (sold separately see pp ) 1.5" (3.8cm),, Antique Bronze or White 70% lumen maintenance based on 50,000 hours of operation (see halogen comparison chart on pp ) 1 (2.5cm) BEAM SPREAD Input volts WATTS CBCP rated LIFE COLOR TEMP (K) CRI 20 degrees 12VAC 9.3 1,739 50,000 2, degrees 12VAC ,000 2, Dimming information For up-to-date dimming information, visit. Optical Accessories Hexcell Louver and MR16 Lenses. Lens/louver holder required (sold separately on p. 163) ø 2.24 (5.7cm) 4 (10.2cm) code M M2 Adjust Beam by turning LED Lens system fj Fast Jack M2 Monorail 2 Circuit D - Distance from SCOPE LED fixture FC - Initial footcandles at the center of beam DIA - Diameter fixture SCO SCO Scope D' FC DIA " '-1" '-5" '-9" '-1" '-6" height " 1,739 Candelas (CBCP) Beam Angle 20 DIA. SN PN BZ Antique Bronze WH White (only with track or canopy) Adjust From D' FC DIA '-10" '-4" '-10" '-9" '-8" '-7" 596 Candelas (CBCP) Beam Angle 50 DIA. Lighting Facts LED Product Light Output (Lumens) Watts Lumens per Watt (Efficacy) Color Accuracy Color Rendering Index (CRI) Light Color Correlated Color Temperature (CCT) Warm White Bright White Daylight 2994 (Warm White) 2600K 3200K 4500K 6500K Visit for the Label Reference Guide. All results are according to the IESNA LN : Approved Method for the Electrical and Photometric Testing of Solid State Lighting. EDGE LIGHTING: -SCO-X-XX 17

5 Image in progress 18

6 Atlas LED Designed by Gregory Kay & Aaron O Brien Patent Pending fj-atl-3- fj-atl-3-bz Antique Bronze LED Fixture Heads fj-atl-3-pn Atlas LED presents a high level of accent lighting for retail displays, galleries/ museums or offices. Providing uniform illumination without UV, IR or the use of mercury, the 19 watt LED lamp is an energy efficient alternative for a 120 watt PAR 38 Spot or 71 watt MR16 lamp (see p. 173). The cool-to-touch fixture allows manual locking of 360 rotation, 90 tilt, and optical lens orientation. The standard version includes an 8 spot lens; additional versions are also available with 14 soft, 33 wide or 10 x 40 linear lens. fj-atl-3-wh White system compatibility height LAMP SPEciFICATIONS 12VAC Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering LED canopy mount and LED track transformer (sold separately see pp ) 3.5" (8.9cm),, Antique Bronze or White 70% lumen maintenance based on 50,000 hours of operation (see halogen comparison chart on p ) -ATL-3_ Standard Version Sold with 1 Lens BEAM SPREAD Input volts WATTS CBCP rated LIFE COLOR TEMP (K) CRI 8 degrees 12VAC ,617 50,000 3, degrees 12VAC ,261 50,000 3, degrees 12VAC ,800 50,000 3, Dimming information optical accessories code M M2 D' FC DIA. 4' 1,351 7" 6' " 8' 338 1'-1" 10' 216 1'-5" 12' 150 1'-8" 14' 110 1'-11" 16' 84 2'-3" For up-to-date dimming information, visit. L30 Soft Focus Lenses: Soft Focus, Wide or Linear Spread, Color Lens with UV Filter, Hexcell Louver or Snoot #ST30 (see p. 163) system Fast Jack M2 Monorail 2 Circuit 21,617 Candelas (CBCP) Beam Angle 8 DIA. fixture ATL ATL Atlas HeiGht " D' FC DIA. 4' 387 1' 6' 172 1'-6" 8' 96 2'-0" 10' 62 2'-5" 12' 43 2'-11" 14' 32 3'-5" 16' 24 3'-11" SPREAD Lens Leave Blank for 8 SF 14 Soft Focus WD 33 Wide LS 10 x 40 7,261 Candelas (CBCP) Beam Angle 14 DIA. Linear Spread SN PN BZ Antique Bronze WH White (only with canopy or track) D' FC DIA. 2' 450 1'-1" 4' 113 2'-4" 6' 50 3'-7" 8' 28 4'-9" 10' 18 5'-11" 12' 13 7'-1" 14' 9 8'-4" 1,800 Candelas (CBCP) Beam Angle 33 DIA. 3.87" (9.8cm) Lighting Facts LED Product Light Output (Lumens) Watts Lumens per Watt (Efficacy) Color Accuracy Color Rendering Index (CRI) Light Color Correlated Color Temperature (CCT) 3.46" (8.8cm) 3.5" (8.9cm) Warm White Bright White Daylight 3116 (Warm White) 2600K 3200K 4500K 6500K Visit for the Label Reference Guide. All results are according to the IESNA LN : Approved Method for the Electrical and Photometric Testing of Solid State Lighting. EDGE LIGHTING: -ATL-**-** ATLAS 8 19

7 Nautilus LED Basia Frossard Custom Home Fashions 20

8 nautilus LED Designed by Gregory Kay & Aaron O Brien Patent Pending fj-nau-3- fj-nau-3-bz Antique Bronze fj-nau-3-pn LED Fixture Heads Providing uniform direct lighting for vertical surfaces, the Nautilus LED wall wash is ideal for retail displays, galleries/museums or offices, the fixture provides efficient illumination without UV, IR or the use of mercury. The coolto-touch fixture allows manual locking of 360 rotation and 180 tilt to evenly wash a wall up to 4' (1.2m) wide from a 2' (0.6m) distance. fj-nau-3-wh White system compatibility 12VAC Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering LED canopy mount and LED track transformer (sold separately see pp ) height 3" (7.6cm) -NAU-3_,, Antique Bronze or White 1.92" (4.9cm) Lamp specification Dimming information code M M watts 12VAC LED, 2949K, 84CRI, approximately 783 lumens, 70% lumen maintenance based on 50,000 hours of operation For up-to-date dimming information, visit. system Fast Jack M2 Monorail 2 Circuit fixture NAU NAU Nautilus height 3 3 3" SN PN BZ Antique Bronze WH White (only with canopy or track) " (7.6cm) " (34.4cm) 3.07" (7.8cm) 2' From Wall 2' 3' 3' From Wall 3' 4' Lighting Facts LED Product Distance from ceiling 0 1' 2' 3' 4' 5' 6' Distance from ceiling 0 1' 2' 3' 4' 5' 6' Light Output (Lumens) Watts Lumens per Watt (Efficacy) Color Accuracy Color Rendering Index (CRI) Light Color Correlated Color Temperature (CCT) (Warm White) 7' 8' ' 8' Warm White Bright White Daylight 2600K 3200K 4500K 6500K Visit for the Label Reference Guide. All results are according to the IESNA LN : Approved Method for the Electrical and Photometric Testing of Solid State Lighting. EDGE LIGHTING: FN-NAU-X-XX 21

9 PRO AIM HALOGEN 7. PHI Fixture Shown Hot Aiming (2mm Allen Screwdriver Included) 2. Hidden Gear with Self Locking Tilt 3. Precision Alignment Guide (Pivots 0 to 90, Rotates 360 ) 4. Pure Nickel Socket Contacts 5. Ball Catch to Hold Hood 6. Keyed to Retain Focus During Lamp Change 7. Rotation Locks 8. Fixture Construction Solid Brass Plated 9. Locking Lens Orientation 22

10 fj-phi-3-pn fj-neo-3- fj-ada-3-bz Antique Bronze fj-box-3-wh White HALOGEN Pro Aim Heads PHI NEO ADAM BOX Specification-Grade Pro Aim Fixtures Feature: A hidden precision machined gear adjustment for hot aiming with an Allen screwdriver (included). Self locking tilt, manual locking horizontal rotation and capacity for three accessories. Precise adjustment capabilities - Pivots 0 to 90 with Precision Alignment Guide and rotates 360. Spread lens locking capability and ap-off hood on the Phi, Adam and Box allow easy access for re-lamping while preserving focus.,, Antique Bronze or White finishes. Custom colors available. Hot aiming on all Pro Aim Fixtures Spread lens locking capability on Phi, Adam and Box 23

11 Monorail 2 Circuit with M2-PHI-3-SN 24

12 phi Pro Aim Designed by Gregory Kay Patent Pending fj-phi-3- fj-phi-3-pn HALOGEN Pro Aim Heads fj-phi-3-bz Antique Bronze fj-phi-3-wh White The golden ratio Phi strikes the perfect balance between form and function. The focus retention system allows precise hot-aiming and locks the 360 rotation, 180 tilt and optical lens orientation with an Allen screwdriver (included). Snap-off hood holds up to three accessory lenses and allows easy access for re-lamping while preserving focus. The optional Gobo Holder transforms the Phi into an image projector (see details on p. 165). system COMPATiBILITY Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack Connector () for ordering canopy mount or track transformer (sold separately see pp ) height 3" (7.6cm),, Antique Bronze or White Lamp specification optical accessories Maximum 50 watt IR MR16 lamp GU 5.3 base 12 or 24 volt (sold separately on pp ) Hexcell Louver, Snoot, Gobo Holder and Glass Lenses (sold separately on p. 163) 1.86" (4.7cm) 3" (7.6cm) code M M2 system Fast Jack M2 Monorail 2 Circuit fixture PHI PHI Phi HEIGHT 3 3 3" FINIsH SN PN BZ Antique Bronze WH White (only with canopy or track) 2.5" (6.4cm) 1.15" (2.9cm) 1.55" (3.9cm) Fast Jack Connector Phi with Gobo Holder More info pp " (7.6cm) Snoot Included code M M2 system Fast Jack M2 Monorail 2 Circuit fixture PHI PHI Phi HEIGHT 3 3 3" AccEssORY GO GO Gobo SN PN FINIsH 2.5" (6.4cm) 25

13 26

14 AdAM Pro Aim Designed by Gregory Kay Patent Pending fj-ada-3- fj-ada-3-pn HALOGEN Pro Aim Heads fj-ada-3-bz Antique Bronze fj-ada-3-wh White Combining performance features with contemporary appeal, the Adam s focus retention system allows precise hot-aiming and locks the 360 rotation, 180 tilt and optical lens orientation with an Allen screwdriver (included). Snap-off hood holds up to three accessory lenses and allows easy access for re-lamping while preserving focus. system COMPATiBILITY height Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ) 3" (7.6cm),, Antique Bronze or White Lamp specification Maximum 50 watt IR MR16 lamp GU 5.3 base 12 or 24 volt (sold separately on pp ) 3" (7.6cm) optical accessories Hexcell Louver, Snoot and Glass Lenses (sold separately on p. 163) 2.75" (7cm) code M M2 system Fast Jack M2 Monorail 2 Circuit fixture ADa ADA Adam HEIGHT 3 3 3" FINIsH SN PN BZ Antique Bronze WH White (only with canopy or track) 3" (7.6cm) Fast Jack Connector features Hot aiming with an Allen screwdriver (included). Self locking tilt, manual locking horizontal rotation and spread lens locking capability. 3" (7.6cm) Pivots 0 to 90 and rotates 360. Hood pulls off so lamp does not change positions when relamping. 2.75" (7cm) 27

15 28

16 BOX Pro Aim Designed by Gregory Kay Patent Pending fj-box-3- fj-box-3-pn HALOGEN Pro Aim Heads fj-box-3-bz Antique Bronze fj-box-3-wh White The geometric Box delivers a balance of form and function. The focus retention system allows precise hot-aiming and locks the 360 rotation, 180 tilt and optical lens orientation with an Allen screwdriver (included). Snap-off hood holds up to three accessory lenses and allows easy access for re-lamping while preserving focus. system COMPATiBILITY height Lamp specification Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ) 3" (7.6cm),, Antique Bronze or White Maximum 50 watt IR MR16 lamp GU 5.3 base 12 or 24 volt (sold separately on pp ) 3" (7.6cm) optical accessories Hexcell Louver, Snoot and Glass Lenses (sold separately on p. 163) 2.6" (6.6cm) code M M2 system Fast Jack M2 Monorail 2 Circuit fixture box BOX Box HEIGHt 3 3 3" FINIsH SN PN BZ Antique Bronze WH White (only with canopy or track) 3" (7.6cm) Fast Jack Connector features Hot aiming with an Allen screwdriver (included). Self locking tilt, manual locking horizontal rotation and spread lens locking capability. Pivots 0 to 90 and rotates " (6.6cm) 3" (7.6cm) Hood pulls off so lamp does not change positions when relamping. 2.6" (6.6cm) 29

17 30

18 NEO Pro Aim Designed by Gregory Kay Patent Pending fj-neo-3- fj-neo-3-pn HALOGEN Pro Aim Heads fj-neo-3-bz Antique Bronze fj-neo-3-wh White Neo s focus retention system precisely aims and locks the 360 rotation, 180 tilt with an Allen screwdriver (included). Screw-on hood holds up to three accessory lenses and allows easy access for re-lamping. Optical lens orientation does not lock on Neo. system COMPATiBILITY height Lamp specification Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ) 3" (7.6cm),, Antique Bronze or White Maximum 50 watt IR MR16 lamp GU 5.3 base 12 or 24 volt (sold separately on p ) 3" (7.6cm) optical accessories Hexcell Louver, Snoot and Glass Lenses (sold separately on p. 163) 2.66" (6.8cm) system fixture HEIGHt code NEO 3 Fast Jack NEO Neo 3 3" M2 Monorail 2 Circuit M M2 FINIsH SN PN BZ Antique Bronze WH White (only with canopy or track) 2.9" (7.4cm) Fast Jack Connector features Hot aiming with an Allen screwdriver (included). Self locking tilt, manual locking horizontal rotation. 3" (7.6cm) Pivots 0 to 90 and rotates 360. Hood pulls off so lamp does not change positions when relamping. 2.75" (6.9cm) 31

19 32

20 REbEL fj-reb-1- fj-reb-1-pn fj-reb-1-bz Antique Bronze HALOGEN Basic Heads The contemporary cylinder-shaped Rebel is a versatile spotlight with a handle that can be removed after hot aiming. It rotates 360 and tilts 90 performing as either an accent light or a stylish down light. The fixture allows easy re-lamping and holds up to three accessories. system Compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount and track transformer separately (see pp ) H Height 1" (2.5cm), 3" (7.6cm), 6" (15.2cm), 12" (30.5cm) or 18" (45.7cm), or Antique Bronze 2.25" (5.7cm) Lamp Specification optical accessories Maximum 50 watt IR MR16 lamp GU 5.3 base - 12 or 24 volt (sold separately on pp ). Bronze Maximum 37W IR. Hexcell Louver, Glass Lenses or Snoot (sold separately on p. 163) 3.71" (9.4cm) code M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture reb REB Rebel HEiGht (H) 1 1 1" 3 3" 6 6" 12 12" 18 18" SN PN BZ FiNiSh Antique Bronze Removable Hot Aiming Handle Supplied fj-reb-3-bz Antique Bronze fj-reb-6-bz Antique Bronze fj-reb-12-bz Antique Bronze fj-reb-3- Order Snoot St16- separately on p

21 34

22 form ROUND & SQUARE HALOGEN Basic Heads fj-for-sq-3-pn fj-for-rd-3- The lightweight, geometric Form functions with an MR16 halogen or MR16 12VAC LED lamp. Available in round or square versions, the contemporary adjustable accent light rotates 360 and tilts 50. The easy-to-aim fixture holds one accessory lens or louver. fj-for-rd-3- with LED MR16 lamp (sold separately) system Compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () when ordering canopy mount or track transformer (sold separately see pp ) Height Lamp Specification Optical accessories 3" (7.6cm), 6" (15.2cm), 12" (30.5cm), 24" (61cm), 36" (91.4cm) or 48" (122cm) or Maximum 75 watt MR16 lamp GU 5.3 base - 12 or 24 volt LED MR16-12VAC compatible (sold separately on pp ) Hexcell Louver, Glass Lenses or Snoot (sold separately on p. 163) code M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture for FOR Form type RD RD Round SQ Square HEiGht (H) 3 3 3" 6 6" 12 12" 24 24" 36 36" 48 48" FiNiSh SN PN H H 2.15" (5.46cm) 2.15" (5.46cm) fj-for-rd-6- Order Snoot St16- sold separately on p. 159 Fast Jack Form Square Fast Jack Form Round 35

23 36

24 form 2-HEAD ROUND & SQUARE fj-for-2rd-48-pn HALOGEN Basic Heads fj-for-2rd-3- The lightweight, geometric Form 2-Head functions with an MR16 halogen or MR16 12VAC LED lamp. Each easy-aiming head rotates 360 and tilts 180 independently. The easy-to-aim fixture is available in round or square versions and holds one accessory lens or louver per head. fj-for-2sq-3-pn system Compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ) Height 3" (7.6cm), 6" (15.2cm), 12" (30.5cm), 24" (61cm), 36" (91.4cm) or 48" (122cm) or Lamp Specification Maximum 37 watt IR MR16 lamp GU 5.3 base - 12 or 24 volt LED MR16-12VAC compatible (sold separately on pp ) Optical accessories Hexcell Louver or Glass Lenses (sold separately on p. 163) SYStEM fixture type HEiGht (H) code for 2RD 3 Fast Jack FOR Form 2RD 2-Head Round 3 3" 2sq 2-Head Square 6 6" M2 Monorail 2 Circuit 12 12" M M " 36 36" 48 48" FiNiSh SN PN H H 2.50" (6.35cm) 2.50" (6.35cm) 5.80" (14.7cm) Fast Jack Form Round 2-Head 5.80" (14.7cm) Fast Jack Form Square 2-Head Head fj-for-2sq-36-pn + Canopy fjp-4rd-pn 37

25 FUNctiON ROUND & SQUARE fj-fun-sq-5- fj-fun-rd-5- The geometric Function head performs as a long range spotlight using an AR111 low voltage halogen lamp. Available in round or square versions, the easily adjustable accent light rotates 360 and tilts 180. system Compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () when ordering canopy mount or track transformer (sold separately see p ) 4.5" (11.4cm) Height 4.5" (11.4cm) or Lamp Specification Maximum 75 watt AR111 lamp with screw terminals 12 volt (sold separately on p. 169) 5" (12.7cm) code M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture FUN FUN Function type RD RD Round SQ Square HEiGht " FiNiSh SN PN Fast Jack Function Round Function Heads shown with Fast Jack Canopy. p " (11.4cm) 5" (12.7cm) Fast Jack Function Square Function Square Head + Canopy & Transformer fj-fun-sq-5- fjp-4sq- fj-fun-rd-5- Function Round Head fjp-4rd- Canopy & Transformer 38

26 harley fj-har-5- fj-har-5-pn fj-har-5-sn HALOGEN Basic Heads with LED MR16 lamp (sold separately) The heavy-duty Harley projects focused light from a halogen or LED 12VAC MR16 lamp; rotates 360, tilts 180º and holds one accessory lens or louver. The optional Gobo Holder transforms the adjustable head into an image projector (see details on p ). system Compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ) height Lamp Specification optical accessories 4.7" (12cm) or Maximum 75 watt MR16 lamp GU 5.3 base - 12 or 24 volt LED MR16-12VAC (sold separately on pp ) Hexcell Louver, Glass Lenses or Snoot (sold separately on p. 163) 2.59" (6.57cm) 4.72" (12cm) SYStEM fixture HEiGht code HAR 5 Fast Jack HAR Harley 5 4.7" M2 Monorail 2 Circuit M M2 FiNiSh SN PN 2.22" (5.63cm) Harley with GOBO HOLDER fj-har-5-go- fj-har-5-go-pn Harley with Gobo Holder projects a standard or custom gobo image on any surface. The focused light is shaped and magnified through the gobo holder and two convex lenses giving 25 degree beam spread - add third convex lens for 37 degree beam spread (see Accessories on p. 165). See Size of Projected Gobo Image diagram on p Snoot Included code M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture HAR HAR Harley HEiGht " AccESSORY GO GO Gobo SN PN FiNiSh 39

27 low rider fj-low-1-sn-s1-sn with Satin Nicklel S1 Shade fj-low-1-sn-s2-pn with Polished Nickel S2 Shade & LED MR16 lamp (sold separately on p. 169) Petite yet versatile, the classic Low Rider spotlight rotates 360 and tilts 90º. Select from a variety of shades to personalize the timeless design. The fixture is led compatible when using the S2 Mesh Shade. system compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ).93" (2.36cm) Height 1.2" (3cm), 3" (7.6cm), 6" (15.2cm), 12" (30.5cm) or 18" (45.7cm) H 1.1" (2.8cm), or Antique Bronze 1.25" (3.18cm) Lamp Specifications Maximum 50 watt IR MR16 lamp GU5.3 base - 12 or 24 volt LED MR16-12VAC compatible with S2 Mesh Shade only (sold separately on p. 169) 1.68" (4.26cm) Required shades S1 - Little Solid Shade, S2 Little Mesh Shade, S3 Round Glass Shade or S5 Big Solid Shade (sold with Low Rider or separately on pp ) optical accessories Hexcell Louver, Glass Lenses or Snoot (sold separately on p. 163) code M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture low HEiGht (h) 1 low Low Rider 1 1.2" 3 3" 6 6" 12 12" 18 18" SN PN BZ FiNiSh Antique Bronze AccESSORY shade code S3 - AM - SN S1 Little Solid Shade S2 Little Mesh Shade S3 Round Glass Shade S5 Big Solid Shade GLASS color* AM Amber WH White *Leave Blank for S1, S2, S5 FiNiSh SN (S1, S3, S5) PN (S1, S2, S3, S5) BZ Antique Bronze ( S1, S2, S3, S5) BK Black (S1, S2) 40

28 HALOGEN Basic Heads fj-low-1-pn-s1-pn fj-low-1-sn-s1-bk fj-low-1-bz-s1-bz fj-low-1-bz-s1-bk with S1 Shade with Black S1 Shade Antique Bronze with Antique Bronze S1 Shade Antique Bronze with Black S1 Shade fj-low-1--s2-bk fj-low-1-pn-s2-pn fj-low-1-pn-s2-bk fj-low-1-bz-s2-bz with Black S2 Shade with S2 Shade with Black S2 Shade Antique Bronze with Antique Bronze S2 Shade fj-low-1--s3-am- fj-low-1--s3-wh- fj-low-1-bz-s3-am-bz fj-low-1-bz-s3-wh-bz with S3 Amber Shade with S3 White Shade Antique Bronze with Antique Bronze S3 Amber Shade Antique Bronze with Antique Bronze S3 White Shade fj-low-1--s5- with S5 Shade fj-low-1-pn-s5-pn with S5 Shade fj-low-1-bz-s5-bz Antique Bronze with Antique Bronze S5 Shade 41

29 LOW RIDER SpiNNER fj-los-1-bz-s-div-sf Antique Bronze with Silver Foil Divi Shade The classic Low Rider with a spinning nut secures a variety of large, heavy decorative glass or fabric shades. It rotates 360 and tilts 90. system compatibility Height Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ) 1.2" (3cm), 3" (7.6cm), 6" (15.2cm), 12" (30.5cm) or 18" (45.7cm) H.93" (2.36cm) 1.1" (2.8cm) Spinning Nut Lamp Specifications, or Antique Bronze Maximum 50 watt IR MR16 lamp GU5.3 base - 12 or 24 volt led MR16-12VAC (compatible with Tapered Shade, pp ) 1.38" (3.5cm) 1.88" (4.8cm) Required shades Divi, Tapered or Nico 3 sold with the Low Rider Spinner or separately on p. 162 optical accessories Hexcell Louver or Glass Lenses (sold separately on p. 163) code M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture LOS LOS Low Rider Spinner HEiGht (h) " 3 3" 6 6" 12 12" 18 18" SN PN BZ FiNiSh Antique Bronze shade code AccESSORY S - DIV - SF S Shade NAME div Divi ShADE COLOR (GLASS) GF Gold Foil CF Copper Foil PE Pearl SF Silver Foil WH White RD Red BL Blue shade code AccESSORY S - NI3 - SF S Shade NAME ni3 Nico 3 ShADE COLOR (GLASS) GF Gold Foil CF Copper Foil SF Silver Foil shade code AccESSORY S - TAPE CHO S Shade NAME TAPE Tapered FAbRic 614 Silk Dupioni ShADE COLOR (SILK) WHT White EGG Eggshell CHO Chocolate CAR Caramel 42

30 divi HALOGEN Basic Heads fj-los-1-pn-s-div-gf with Gold Foil Divi Shade fj-los-1-bz-s-div-cf Antique Bronze with Copper Foil Divi Shade fj-los-1-sn-s-div-pe with Pearl Divi Shade fj-los-1-sn-s-div-sf with Silver Foil Divi Shade fj-los-1--s-div-wh with White Divi Shade fj-los-1--s-div-rd with Red Divi Shade fj-los-1-sn-s-div-bl with Blue Divi Shade NicO 3 fj-los-1-bz-s-ni3-gf Antique Bronze with Gold Foil Nico 3 Shade fj-los-1-pn-s-ni3-cf with Copper Foil Nico 3 Shade fj-los-1-sn-s-ni3-sf with Silver Foil Nico 3 Shade fj-los-1-sn-s-ni3-gf with Gold Foil Nico 3 Shade tapered fj-los-1-sn-s-tape-614-wht fj-los-1-pn-s-tape-614-egg fj-los-1-bz-s-tape-614-cho fj-los-1-bz-s-tape-614-car with White Silk Dupioni Tapered Shade with Eggshell Silk Dupioni Tapered Shade Antique Bronze with Chocolate Silk Dupioni Tapered Shade Antique Bronze with Caramel Silk Dupioni Tapered Shade 43

31 44

32 chopper fj-cho-3-pn HALOGEN fj-cho-1- with LED Basic Heads fj-cho-1- fj-cho-1-pn-s7-pn with S7 Shade Combining simple shapes with beveled edges, the Chopper functions with an MR16 halogen or MR16 12VAC LED lamp with S7 shade or no shade. The fixture rotates 360, tilts 270 ; accommodates shades and optical accessories with louver lens holder. fj-cho-1--s6- with S6 Shade system compatibility Monorail (M) or Monorail 2 Circuit (M2) Use Fast Jack connector () for ordering canopy mount or track transformer (sold separately see pp ), or Antique Bronze Height 1" (2.5cm), 3" (7.6cm), 6" (15.2cm), 12" (30.5cm) or 18" (45.7cm) Lamp Specifications optional shade accessories Maximum 75 watt MR16 lamp GU 5.3 base - 12 or 24 volt LED MR16-12VAC (compatible with no shade or S7 Mesh Shade, pp. 169) S6 - Solid Back Shade or S7 - Mesh Back Shade, LH16 - Louver Lens Holder (sold separately on pp. 161, 163) fj-cho-1-bz-lh16-bz Antique Bronze with Antique Bronze Louver Lens Holder optical accessories Hexcell Louver, Glass Lenses, Snoot or Louver Lens Holder (sold separately on p. 163) FiNiSh shade code Cho 1 code S6 - SN M M2 SYStEM Fast Jack M2 Monorail 2 Circuit fixture CHO Chopper height (H) 1 1" 3 3" 6 6" 12 12" 18 18" SN PN BZ Antique Bronze AccESSORY S6 Solid Back Shade S7 Mesh Back Shade LH16 Louver Lens Holder FiNiSh SN (S6, LH16) PN BZ Antique Bronze BK Black (S6, S7).93" (2.36cm) H.81" (2cm) 45

33 H2O Michigan Avenue, Chicago 46

34 vespa HALOGEN m-ves--lh16- with Louver Lens Holder Basic Heads m-ves--s1- with S1 Shade m-ves- m-ves--s6- with S6 Shade The self-locking directional Vespa aps easily onto Monorail, functioning with an MR16 halogen or MR16 12VAC led lamp with S7 shade or no shade. The fixture tilts 170 horizontally and vertically, accommodates shades and optical accessories with louver lens holder. m-ves--s3-am- with S3 Amber Shade system compatibility Monorail (M) Height Lamp Specification optional Shade Accessories 1.5" (3.8cm), or Antique Bronze Maximum 75 watt MR16 GU5.3 base - 12 or 24 volt LED MR16-12VAC (compatible with no shade or S7 Mesh Shade, p. 169) S1 Little Solid Shade, S2 Little Mesh Shade, S3 Round Glass Shade, S6 Solid Back Shade or S7 Mesh Back Shade (pp. 161, 163) optical accessories code SYStEM m Hexcell Louver, Glass Lenses, Snoot or Louver Lens Holder (sold separately on p. 163) fixture ves ves Vespa FiNiSh SN PN BZ Antique Bronze AccESSORY shade code S3 - AM- SN S1 Little Solid Shade S2 Little Mesh Shade S3 Round Glass Shade S6 Solid Back Shade S7 Mesh Back Shade LH16 Lens Holder GLASS COLOR* AM Amber WH White *Leave Blank for S1, S2, S6, S7 and LH16 FiNiSh SN (S1, S2, S3, S6, LH16) PN BZ Antique Bronze BK Black (S1, S2, S6, S7, LH16) m-ves-pn-s7-pn with S7 Shade LED Compatible 1.1" (2.8cm) 2.3" (5.8cm) 47